First of all I would like to say I appreciate all the work that the XDA forums has been doing, and I am pleased to see that the community is as strong, if not, stronger since the last time that I have been here a couple years ago. The questions, answers, feedback and help, let alone for the Samsung Galaxy S 4G released by T-Mobile in February of 2011, is amazing. These forums have really helped people make the most out of their device, and had it not exist, this Galaxy S in my hand would have been long forgotten by Samsung, and the Gingerbread stock ROM that I was given with would be my home. It reminded me of how much I had missed messing with these android devices; nothing like jailbreaking and installing cydia on my iPhone. The experience is not the same. Anyways...
Pulling out my T959V from its box I decided it was time to finally install ICS on it after Samsung have let these great device fade away.
I installed ICS last night and stayed up searching for kernels and testing out different ROMS some slow and many faster than others and decided that Cyanogen 9 was the best looking and performance-wise ROM on the phone in my opinion. Considering that all other ROMS base it on the nightly builds extra stuff was just junk, considering this phone only has one processor. So I upgraded from Gingerbread 2.3.6 and I've tried many different kernels and everything works except WiFi. It can not even search for one network no matter how many times I press "Scan". I'd appreciate all the help I can get.
Thanks
Try rebooting into recovery and running fix permissions. Usually fixes wifi right up.
getochkn said:
Try rebooting into recovery and running fix permissions. Usually fixes wifi right up.
Click to expand...
Click to collapse
gave that a go no good :/ I wonder what the problem is?
mkho30 said:
gave that a go no good :/ I wonder what the problem is?
Click to expand...
Click to collapse
Was wifi working after you went to GB? Just trying to eliminate a hardware issue. I've flashed CM9 a bunch and have never had wifi issues on it.
hechoen said:
Was wifi working after you went to GB? Just trying to eliminate a hardware issue. I've flashed CM9 a bunch and have never had wifi issues on it.
Click to expand...
Click to collapse
yeah I actually used wifi on that same day before I upgraded to ICS. I was using stock GB 2.3.6 then rooted and all that stuff...
mkho30 said:
yeah I actually used wifi on that same day before I upgraded to ICS. I was using stock GB 2.3.6 then rooted and all that stuff...
Click to expand...
Click to collapse
I'd check the MD5 of the CM9 DL and make sure it's a match. I haven't heard of anyone else having that issue. Also make sure you DL the latest CM9. If the MD5 matches format system, wipe cache/dalvik and flash again. Reboot an let it sit for five minutes then try wifi.
hechoen said:
I'd check the MD5 of the CM9 DL and make sure it's a match. I haven't heard of anyone else having that issue. Also make sure you DL the latest CM9. If the MD5 matches format system, wipe cache/dalvik and flash again. Reboot an let it sit for five minutes then try wifi.
Click to expand...
Click to collapse
Yeah I've checked the MD5 sums of the zip packages after download. This is so bizarre, and the CM9 is not the only ROM I've tried. I've tried about 4 or 5 of them and different kernels as well and all of them do not connect to WiFi. I have formatted system, and always wiped any trace of the prior ROM before installing. Plus, I have tried the method where I would boot to recovery and "fix permissions". No good.
I would use a heimdall one click go back to stock kj6 then flash up to cm9. Sounds like you have some bugs that will only get squashed by going back to stock. IMO I would flash bootloaders too. Just so it overwrites EVERYTHING.
eollie said:
I would use a heimdall one click go back to stock kj6 then flash up to cm9. Sounds like you have some bugs that will only get squashed by going back to stock. IMO I would flash bootloaders too. Just so it overwrites EVERYTHING.
Click to expand...
Click to collapse
I just used the Stock KJ6 + Root with the Blastoff v2 kernel integrated, flashed, flashed again and installed boot-loaders as well. Phone restarted, went to WiFi, checked it, and it says "Error". Now I'm going to flash it to true stock using Odin rather than the .jar executable no luck so far and I don't know whats going on.
mkho30 said:
I just used the Stock KJ6 + Root with the Blastoff v2 kernel integrated, flashed, flashed again and installed boot-loaders as well. Phone restarted, went to WiFi, checked it, and it says "Error". Now I'm going to flash it to true stock using Odin rather than the .jar executable no luck so far and I don't know whats going on.
Click to expand...
Click to collapse
Sounding more and more like a hardware issue. Wifi and bluetooth are on the same chip so if your still on stock try and turn on BT. If it turns on it might not be the chip. If it gives the same error I'd bet money on a bad chip.
This would be a good time for logcat and dmesg...
Posted from my SGS4G, thanks to Team Acid development
hechoen said:
Sounding more and more like a hardware issue. Wifi and bluetooth are on the same chip so if your still on stock try and turn on BT. If it turns on it might not be the chip. If it gives the same error I'd bet money on a bad chip.
Click to expand...
Click to collapse
Bluetooth works fine, WiFi just wont turn on. Its not a hardware issue, and WiFi was working the same day before I flashed to ICS
Done use stock + blastoff that is a stepping stone one click for people to go back to stock then either flash another gb rom or ics rom. Wifi is broken because of the new wifi module used. I never meant for it to be used as a daily driver. Use the heimdall one click bhundven has posted in his one click thread.
@mkho30
I had the same exact Wi-Fi issue a few months ago. I tried everything you tried and what members are suggesting in this thread.
I also asked about this issue on irc (Team Acid) and was told by Bryan that ICS (if I remember correctly) doesn't support WPS button connection. I assumed it was "on my end" and not ROM related.
Bryan suggested that I reboot my router. I had done that several times before asking. I didn't even know you could log in to your router to reconfigure it so he suggested that I Google to learn.
Long story short. I googled and read allot. I reconfigured my router many different ways. I disabled my WPS button connection and reset my router many times. I changed the security every way possible. I even set up a guest network.. the ONLY way I was able to connect to my Wi-Fi network was if I disabled the security COMPLETELY.
That wasn't an option for me. I live in an apartment building and I have seen people in the halls with laptops using their neighbors Wi-Fi.
I tried everything for a couple of months and finally went back to Gingerbread last weekend.
Sorry I can't be of any help with this reply. I just wanted to share my experience and let you know that you aren't the only one that has this issue...man I miss ICS. I didn't have an issue with the battery after "I settled in" Hopefully we can find out what is going on with us.
Btw. I'm back on Gingerbread and I connect to Wi-Fi with no problems.
WPA2 encryption should work fine. It works fine with my router configuration
FBis251 said:
WPA2 encryption should work fine. It works fine with my router configuration
Click to expand...
Click to collapse
I tried that several times FB. During my searching I came across a thread (one of those answers sites) that gave your answer as a fix.
I REALLY did my do diligence in trying to get connected. I hadn't seen anyone else with this problem until today so I spent hours trying WPA2 and other configurations. I thought WPA2 would fix it for sure because that was what I had read so I kept trying it. It never worked for me. The only thing that did was having no encryption at all..I started to think that it was a "Black Ice Voodoo thing" lol. Remember how some users, no matter what they did, could never flash Black Ice Voodoo?
Btw the error I always got was an Authentication error.
Thanks for replying
If you're up for it and your router is supported, try OpenWRT. It really sounds like a router issue.
Posted from my SGS4G, thanks to Team Acid development
Sorry. I don't use a pc at work. I have to sneak on xda using my phone and they don't like seeing is on our phones for to long.
I forgot to mention in my reply to the OP that I DIDN'T have a problem scanning for Wi-Fi access. I could do that. I just couldn't connect without getting an Authentication Error. My phone would scan, connect, then discontent and give me the error.
I've had the exact same authentication error, scans,asks for password, tries to connect, then errors out, usually always after flashing CM9 and either a reinstall (recopying to my SDcard too) or a fix permissions have fixed it.
ALSO, this is very important. FORGET the connections in your wifi list after doing the fix permissions. IT WILL NOT connect to a saved connection. Reboot to recovery, fix permissions (don't use a tool within android), goto wifi, click on the connection and choose forget, then choose the connection again and try that.
jeffsf said:
If you're up for it and your router is supported, try OpenWRT. It really sounds like a router issue.
Posted from my SGS4G, thanks to Team Acid development
Click to expand...
Click to collapse
Thanks Jeff. I'll try it when I get home. I have a Motorola Surfboard that is less than a year old (It's a modem/router combo) so the unit is "up to date"
---------- Post added at 05:35 PM ---------- Previous post was at 05:16 PM ----------
getochkn said:
I've had the exact same authentication error, scans,asks for password, tries to connect, then errors out, usually always after flashing CM9 and either a reinstall (recopying to my SDcard too) or a fix permissions have fixed it.
ALSO, this is very important. FORGET the connections in your wifi list after doing the fix permissions. IT WILL NOT connect to a saved connection. Reboot to recovery, fix permissions (don't use a tool within android), goto wifi, click on the connection and choose forget, then choose the connection again and try that.
Click to expand...
Click to collapse
I will try this. I have done much of what you have stated here maybe even all of it before. But not in the order you describe.. I'd really like to go back to ICS. I had 4G on it (home) where I used to get 3G on Gingerbread. Also at home I needed Wi-Fi calling on Gingerbread but on ICS I had great reception.
@jeff. I just googled OpenWRT and I should have before I said I'll try it when I get home lol. OpenWRT might be to much for me right now.
Thank you for all your help people. I'll update you as soon as I can. I must go sailing now. It's Red Flag!
Related
Just want to know if its just me or other people also. Lately even when I have service I don't actually have service..... Internet won't work/don't get texts I have to restart my phone to get it working again. Just want to know if it my phone or the service. Im running on [ROM-Leak][ODIN] Gingerbread 2.3.4 T959VUVKG4.
I had a similar issue coupke if weeks ago. Lasted about a day here. do you have the problem when using wifi too?
Sent from my SGH-T959V using XDA App
No I have no issues with wifi.. This has been going on for about 3 days now... it pissing me off....
You could try flashing another modem and see if it gives you better results. It might just be that KG4 isn't good for your area.
um go To Wirless & networks then go to Mobile Networks Network operators and hit search now.. and when tmobile comes up click on it... try that see if it works
i don't know if this is considered a service issue or not though, but i did have a couple of calls that did not go through and i'm on Valhalla 1.3.2.
Anyone else you know in your area on T-Mobile? If so are they having an issue? If not, definitely turn off the phone, reseat the SIM (if it's old, go get a new one), then see if it's better. If not, try what bkoon said. Let us know how it goes.
Sent from my SGH-T959V using XDA App
onlyonthursday said:
Just want to know if its just me or other people also. Lately even when I have service I don't actually have service..... Internet won't work/don't get texts I have to restart my phone to get it working again. Just want to know if it my phone or the service. Im running on [ROM-Leak][ODIN] Gingerbread 2.3.4 T959VUVKG4.
Click to expand...
Click to collapse
My Wife running an unlocked Apple iPhone 3G on T-Mobile has had the same, as have I with Valhalla, howevery I have had less trouble while using WiFi calling mode.
bkoon1218 said:
You could try flashing another modem and see if it gives you better results. It might just be that KG4 isn't good for your area.
Click to expand...
Click to collapse
I'm still new to this so I don't know how to flash a modem/what exactly a modem is but I will look it up and see.
Also I didn't say it in the OP but this happens randomly. I sometimes go for almost the whole day without it doing this and sometimes it happens 10 mins after I turn on my phone.
markusrow said:
My Wife running an unlocked Apple iPhone 3G on T-Mobile has had the same, as have I with Valhalla, howevery I have had less trouble while using WiFi calling mode.
Click to expand...
Click to collapse
If she's having a similar issue on a totally different phone it would seem to be a T-Mobile issue. Does it only happen in a certain area (your house, places you go/hang out, etc.) or all over the city?
stephen_w said:
If she's having a similar issue on a totally different phone it would seem to be a T-Mobile issue. Does it only happen in a certain area (your house, places you go/hang out, etc.) or all over the city?
Click to expand...
Click to collapse
No it's just random for me.
onlyonthursday said:
No it's just random for me.
Click to expand...
Click to collapse
Ah, I misunderstood. I thought you meant she has the same issue. What about doing a factory data reset & also reseating the SIM? Barring that, maybe flash a new ROM onto it to see if that helps. As bkoon alluded to, some modems (the part that talks to T-Mobile as well as wifi) work better in some areas than in others. Flashing a different ROM via ODIN would give you a different modem.
If you just want to flash the modem itself via ODIN, take a look in the developer forum (http://forum.xda-developers.com/showthread.php?t=1192436). You open ODIN, put the modem file in the "PHONE" location, and hit start.
If you need help, let me know & I'll help in any way I can.
stephen_w said:
Ah, I misunderstood. I thought you meant she has the same issue. What about doing a factory data reset & also reseating the SIM? Barring that, maybe flash a new ROM onto it to see if that helps. As bkoon alluded to, some modems (the part that talks to T-Mobile as well as wifi) work better in some areas than in others. Flashing a different ROM via ODIN would give you a different modem.
If you just want to flash the modem itself via ODIN, take a look in the developer forum (http://forum.xda-developers.com/showthread.php?t=1192436). You open ODIN, put the modem file in the "PHONE" location, and hit start.
If you need help, let me know & I'll help in any way I can.
Click to expand...
Click to collapse
Thank you. Right now I'm flashing a new rom but kinda stuck... im at the last part where you flash it from CWM but I dont know what to push to start the flashing... I just got done readin the noobs guide to flashing but it doesnt tell you the final step haha
Edit: NVM i got everything working with the new ROM so I will report back later to see the results and also try new modems.
onlyonthursday said:
Thank you. Right now I'm flashing a new rom but kinda stuck... im at the last part where you flash it from CWM but I dont know what to push to start the flashing... I just got done readin the noobs guide to flashing but it doesnt tell you the final step haha
Click to expand...
Click to collapse
I have to admit I'm CWM stupid Iv'e only ever flashed dsexton's Adrenaline Shot from CWM. I've never flashed a new ROM that way. I imagine it's the same as flashing any other ZIP, though. Tell me what steps you followed & where you're stuck & I'll do my best to help.
I'm more of an ODIN guy, but that's because I'm fairly new to this too.
stephen_w said:
I have to admit I'm CWM stupid Iv'e only ever flashed dsexton's Adrenaline Shot from CWM. I've never flashed a new ROM that way. I imagine it's the same as flashing any other ZIP, though. Tell me what steps you followed & where you're stuck & I'll do my best to help.
I'm more of an ODIN guy, but that's because I'm fairly new to this too.
Click to expand...
Click to collapse
Ya... I have had to many bad experiences with odin. CWM has been pretty easy so far.
stephen_w said:
If she's having a similar issue on a totally different phone it would seem to be a T-Mobile issue. Does it only happen in a certain area (your house, places you go/hang out, etc.) or all over the city?
Click to expand...
Click to collapse
We have not been monitoring carefully, however it may be in areas where reception is poor.
markusrow said:
We have not been monitoring carefully, however it may be in areas where reception is poor.
Click to expand...
Click to collapse
Well the thing is I have full bars and even says 4G but it acts like I have no service(also this only started recently and I used to never have problems). It hasn't happened since I installed a new ROM yet but I have only had the ROM for about 5 hours. I am going to try out modems also to see if I can get better reception in some areas, but I have never changed the modem before so we will see how it all goes.
I just fresh flashed to EaglesBlood
WiFi calling seems to be stuck. It says "enabling" but it's stuck on this forever.
I did a reset (just in case) - didn't fix it
any thoughts?
Thanks!!!
Wifi calling is notoriously bad. It will work fine for some and barely ever work for others. My completely stock 2.3.3 had the same problem time and time again, as does my phone in its current setup. I believe the problem is external.
Sent from my LG-P999
e4e5nf3nc6 said:
Wifi calling is notoriously bad. It will work fine for some and barely ever work for others. My completely stock 2.3.3 had the same problem time and time again, as does my phone in its current setup. I believe the problem is external.
Sent from my LG-P999
Click to expand...
Click to collapse
Thank you. That's so odd, during the night (did you notice XDA was down for maintenance?) i switched to Weapon ROM and the WiFi issue persists. Yet my wife's phone, the Vibrant, stock rom of course, does the WiFi thing every time and right on the money. Damn it LG!
I think I remember reading that it was having trouble switching DNS servers when needed or something along those lines. I found plenty of feedback on these forums if you want to do a quick search and see if you can dig anything up.
(Yeah, I noticed the forums went down for a bit. I was in the middle of something at the time and really needed links!)
e4e5nf3nc6 said:
I think I remember reading that it was having trouble switching DNS servers when needed or something along those lines. I found plenty of feedback on these forums if you want to do a quick search and see if you can dig anything up.
(Yeah, I noticed the forums went down for a bit. I was in the middle of something at the time and really needed links!)
Click to expand...
Click to collapse
Thx!
Tsugi ROM solved this it's no working!
(yes I am on a ROM chase - I have some free time so I decided to not give up until I make this device owned!
I just want to first thank everyone who worked on getting cyanogenmod to work on the jellybean boot loader. There is a problem that i am seeing though through the threads that wifi seems to not turn on. Unfortunately i have the same problem, i have had it for both the modified version on the 30th and still have it on the official version out the 31st. Has anyone else had this problem or even any vague idea as to the problem causing?
Wish I was posting with help I just wanted to cosign that I've also been going through the same thing from yesterday's unofficial to today's rom with turning the wifi on and having the tablet freeze. Hoping it can be worked out looking forward to using cm10 as soon as possible
I can confirm that i am still having the same wifi issues with the 11-01 official version.
I also had wifi issues initially, disable the wifi sleep policy and reboot, it would work afterwards.
sghi777 said:
I also had wifi issues initially, disable the wifi sleep policy and reboot, it would work afterwards.
Click to expand...
Click to collapse
for what it's worth I tried this but after the reboot I still ended up with the same problem, I think I'll just stick with cleanrom for now it's been running more than well enough
I updated to 11-2 and still no fix but I think I have come across something. I don't know if it just me but for some reason the wifi region in advanced is set to Europe. I try to switch it to US but never seems to save it. Am I the only one?
froggerhopper said:
I just want to first thank everyone who worked on getting cyanogenmod to work on the jellybean boot loader. There is a problem that i am seeing though through the threads that wifi seems to not turn on. Unfortunately i have the same problem, i have had it for both the modified version on the 30th and still have it on the official version out the 31st. Has anyone else had this problem or even any vague idea as to the problem causing?
Click to expand...
Click to collapse
I don't have the issue. I have done this twice for each rom stock, cleanrom, jb hydro and I have wifi and gps. I'm using Twrp.
wipe cache, Dalvik, Factory Reset, System ( you must flash a rom now ) so be absolutely sure you have one available.
flash cm10
reboot
boot recovery
flash gapps
reboot
This didn't fail in a total of six tries. GPS is slow and not many sats but it does work.
Once I was stuck on bootanimation. I forced power down by holding power till screen went black. Power up and booted properly.
I miss spoke on the above when I listed gps - checking my notes and reflashing, gps does not work on nightly for me; it does work on the other cm10 jb for me. Sorry! Wifi does work on both.
DANG!! As of 11/3 version, I still have wifi issues. I have flashed back when there was no CM10 and have done exactly above and still cant get no reception. I still think that the region in advanced settings have something to do with it.
froggerhopper said:
DANG!! As of 11/3 version, I still have wifi issues. I have flashed back when there was no CM10 and have done exactly above and still cant get no reception. I still think that the region in advanced settings have something to do with it.
Click to expand...
Click to collapse
I'm sorry to hear that. I had hoped the problem was the difference in the way we handled wiping and flashing. I don't understand why my unit works and yours doesn't. I don't remember anything else I did that may have made a difference but I'll download 11-3 and try again.
I'll report with that status in a bit.:good:
I was on cleanrom, flashed 11-3 as above and have wifi. I wish we knew how to isolate this problem, I'll do some searching and look at some of my logs and dmesg. There must be an answer why some units work and others don't.
When you try to turn wifi on does it turn on and stay turned on or does it refuse to turn on?
I checked my region settings and they were set Europe, I changed to US just for fun but no difference in use. I have read in the US they are restricted to channels 1 - 11 instead of 1 - 14, maybe that is one of the reasons for that option.
I was on cleanrom 2.5 before also. Had no problems with it but wanted to see if CM10 was any better. What happens is that after i flash CM10, when you first start a tablet from scratch, it will search for wifi and say in the middle of the screen "Turning wifi on" and will stay that way. So i eventually have to skip it to go on to the Home screen. When I go back later in settings to wifi, says the same thing and sometimes crashes. When I go back to clean rom or original stock, have no problems.
froggerhopper said:
I was on cleanrom 2.5 before also. Had no problems with it but wanted to see if CM10 was any better. What happens is that after i flash CM10, when you first start a tablet from scratch, it will search for wifi and say in the middle of the screen "Turning wifi on" and will stay that way. So i eventually have to skip it to go on to the Home screen. When I go back later in settings to wifi, says the same thing and sometimes crashes. When I go back to clean rom or original stock, have no problems.
Click to expand...
Click to collapse
I can't emulate that on my unit. Have you tried the cm10 by timmytim? If you need cm10 it may be an option. It is built on the cm10 you are trying to use but with some modifications.
I'm also waiting on the nightlies, in my case I'm waiting on gps.:good:
froggerhopper said:
I was on cleanrom 2.5 before also. Had no problems with it but wanted to see if CM10 was any better. What happens is that after i flash CM10, when you first start a tablet from scratch, it will search for wifi and say in the middle of the screen "Turning wifi on" and will stay that way. So i eventually have to skip it to go on to the Home screen. When I go back later in settings to wifi, says the same thing and sometimes crashes. When I go back to clean rom or original stock, have no problems.
Click to expand...
Click to collapse
One last shot, it will only take 5 minutes and is easy.
Power off
Remove external sdcard
Remove from dock
Power on
I now updated from twrp 2.2.2 to 2.3.1 and tried BOTH 11/5 AND timmytim versions and still no luck. Do you think i need to try clockworkmod? I don't think that would make a difference.
froggerhopper said:
I now updated from twrp 2.2.2 to 2.3.1 and tried BOTH 11/5 AND timmytim versions and still no luck. Do you think i need to try clockworkmod? I don't think that would make a difference.
Click to expand...
Click to collapse
No, I'm afraid not.
The last thing I can think of that could be different between our situations is your wifi.
I must begin by telling you my wifi router is an antique so I don't have some of the newer features.
This is a fishing trip. Take the little info I provide and try to use it to investigate your situation.
My router provides a table where I can list mac addresses of units I have programmed and only these are allowed access, even if they have the correct password, etc.
Some of the newer units have a button that automatically looks for units and self programs the router security features and any change made since the button was last pressed. If you have such then try to sync your unit again with cm10, otherwise look carefully through your router security options and see if anything stands out that may be different than with stock rom.
I know mac addresses and such are factory programmed but they can be spoofed and on units other than asus do sometimes change with rom.
For instance if I go to google play my TF300 shows as two different unit names.
Asus ASUS Transformer Pad TF300T
Asus Transformer Pad TF300T
That is enough difference to possibly cause your router to deny access.
None of this may apply but it is worth a try.
Good Luck!
wifi issues too
I am having same problem. tried 11-06 nightly and wifi will not even turn on. Tried other nightlies, same deal. Can't understand why not happening to all units. If anyone figures it out, let us know. I really want to try CM10! I think this is being discussed on the developers forum on the CM10 for JB thread as well.
bobrebn3 said:
I am having same problem. tried 11-06 nightly and wifi will not even turn on. Tried other nightlies, same deal. Can't understand why not happening to all units. If anyone figures it out, let us know. I really want to try CM10!
Click to expand...
Click to collapse
11/06 and 11/07 are both broken for me as well. I saw a post by untermensch ( I think ) in the nightly thread where he was pushing some of his work for use in cm10. Maybe in a day or two everyone will have wifi.
I have read you can flash his kernel after setting up cm10 and get wifi. I have not tried that and if a fix comes soon I probably won't.
What I have done is flash his TF300T kernel over CleanRom and it is faster and smoother. I am not over clocking, using balanced mode.
Sorry I don't have any other thoughts at this time.
Good Luck to us all!
uugghh
bobrebn3 said:
I am having same problem. tried 11-06 nightly and wifi will not even turn on. Tried other nightlies, same deal. Can't understand why not happening to all units. If anyone figures it out, let us know. I really want to try CM10! I think this is being discussed on the developers forum on the CM10 for JB thread as well.
Click to expand...
Click to collapse
I tried the last couple nightlies and still no wifi capability. Tried a rom based on CM10, still a no go. SO, using cleanROM for now, it seems to work very well for me. I wonder why CM10 works for some and not others? Is there a difference in the hardware from unit to unit?
Wifi works again on nightlies 11/09
I still don't have gps.
LUCKY!!!! I read the post and now on 11/9 and still the same problem. I do want to ask a question though to all that do have the problem. Were you on cleanrom before trying CM10? Does this have anything to do with cleankernel?
froggerhopper said:
LUCKY!!!! I read the post and now on 11/9 and still the same problem. I do want to ask a question though to all that do have the problem. Were you on cleanrom before trying CM10? Does this have anything to do with cleankernel?
Click to expand...
Click to collapse
I know you asked for those that didn't work but.
Just for more info and being fair to cleanrom.
I was on cleanrom when I flashed 11/09 and now I'm back on cleanrom till I see a size change on nightlies.
I try to keep up with latest os, but 4.3 has me baffled. The first time I tried to install 4.3 was on Jellybam 10.2. I followed the instructions to the tee, but it didn't work. All 4.3 roms I've loaded I've never had a signal. I don't know what I'm doing wrong. Now that all of the 4.3 roms have the custom recovery already on the rom, it still doesn't work. I have no signal. I thought about unrooting my sg3 and starting over, but that is a pain. So I'm basically stuck with 4.2.2. If anyone has anything to say about my problem please do so. Thanks
wily5150 said:
I try to keep up with latest os, but 4.3 has me baffled. The first time I tried to install 4.3 was on Jellybam 10.2. I followed the instructions to the tee, but it didn't work. All 4.3 roms I've loaded I've never had a signal. I don't know what I'm doing wrong. Now that all of the 4.3 roms have the custom recovery already on the rom, it still doesn't work. I have no signal. I thought about unrooting my sg3 and starting over, but that is a pain. So I'm basically stuck with 4.2.2. If anyone has anything to say about my problem please do so. Thanks
Click to expand...
Click to collapse
I'll second that. Was running cleanrom 7.0, thought I'd fool around with 4.3 Flashed a couple of different ROMS, and none worked. Restored my backup of Cleanrom, and still no signal. It shows 4 bars, can receive an occasional text, but trying to text or make a call the signal drops away. Help!
Tim
wily5150 said:
I try to keep up with latest os, but 4.3 has me baffled. The first time I tried to install 4.3 was on Jellybam 10.2. I followed the instructions to the tee, but it didn't work. All 4.3 roms I've loaded I've never had a signal. I don't know what I'm doing wrong. Now that all of the 4.3 roms have the custom recovery already on the rom, it still doesn't work. I have no signal. I thought about unrooting my sg3 and starting over, but that is a pain. So I'm basically stuck with 4.2.2. If anyone has anything to say about my problem please do so. Thanks
Click to expand...
Click to collapse
moonfarm said:
I'll second that. Was running cleanrom 7.0, thought I'd fool around with 4.3 Flashed a couple of different ROMS, and none worked. Restored my backup of Cleanrom, and still no signal. It shows 4 bars, can receive an occasional text, but trying to text or make a call the signal drops away. Help!
Tim
Click to expand...
Click to collapse
when you flash, co you clean flash? and what recovery are you using? This info would help in getting your questions answered.
i've been running Mastamoon's unofficial 10.2 (Android 4.3) nightlies (http://forum.xda-developers.com/showthread.php?t=2385652), and regularly flash back and forth between TW Roms as well and have never had any real data problems. sure, drops data every once in a great while, but Mastamoon puts a lot of work into cleaning up issues.
one thing: IF you flash, and you don't have data, did you wait more than a couple of minutes? Sometimes it takes a while on first flashes. Also, did you check what your status said? (menu >system settings >about phone >status? Also, check to insure your mobile network is set up correctly (menu >system settings >more > mobile network settings) and check your CDMA subscription is set to RUIM/SIM and NOT NV, and network mode is set to LTE/CDMA/EvDo sometimes during a bad flash, these can get hosed up.
like i said, i run Masta's unofficial version, and go in and out of data areas (no data in the subway tunnels) and it always goes right back.
give that a try, and if still having problems, add more information befor just saying "i don't get any data with any 4.3 rom
goldsmitht said:
when you flash, co you clean flash? and what recovery are you using? This info would help in getting your questions answered.
i've been running Mastamoon's unofficial 10.2 (Android 4.3) nightlies (http://forum.xda-developers.com/showthread.php?t=2385652), and regularly flash back and forth between TW Roms as well and have never had any real data problems. sure, drops data every once in a great while, but Mastamoon puts a lot of work into cleaning up issues.
one thing: IF you flash, and you don't have data, did you wait more than a couple of minutes? Sometimes it takes a while on first flashes. Also, did you check what your status said? (menu >system settings >about phone >status? Also, check to insure your mobile network is set up correctly (menu >system settings >more > mobile network settings) and check your CDMA subscription is set to RUIM/SIM and NOT NV, and network mode is set to LTE/CDMA/EvDo sometimes during a bad flash, these can get hosed up.
like i said, i run Masta's unofficial version, and go in and out of data areas (no data in the subway tunnels) and it always goes right back.
give that a try, and if still having problems, add more information befor just saying "i don't get any data with any 4.3 rom
Click to expand...
Click to collapse
Good afternoon, and thanks for your help.
I wish I could give you more information, but I broke one of my cardinal rules about messing with my phone and didn't take notes. Suffice it to say I was trying a couple of different 4.3 ROMS in the forums, as well as the two available MIUI roms that were in there. I use TWRP.
I did wait quite a while before declaring no data, it has actually been a couple of days. It does show I have a signal, and I can get texts that are sent to me. When my wife tries to call my phone it goes right to voice mail, even when it does say I have a signal (4G, full bars). I also cannot send a text, it immediately goes to 'failed message'.
I tried setting my phone back to LTE/CDMA/EvDo, but I don't see an option for CDMA subscription. I wonder if I accidentally tried a Global ROM instead? All I am really looking for is some 4.2 love, I like what my daughters Nexus 4 has for lock screen widgets, and my Cleanrom installation is acting a little wonky now and again, so thought it was time to flash something new. Silly rabbit, trix are for kids.
Thanks again. Thinking of flashing a stock ROM and starting over. Any thoughts?
moonfarm said:
Good afternoon, and thanks for your help.
I wish I could give you more information, but I broke one of my cardinal rules about messing with my phone and didn't take notes. Suffice it to say I was trying a couple of different 4.3 ROMS in the forums, as well as the two available MIUI roms that were in there. I use TWRP.
I did wait quite a while before declaring no data, it has actually been a couple of days. It does show I have a signal, and I can get texts that are sent to me. When my wife tries to call my phone it goes right to voice mail, even when it does say I have a signal (4G, full bars). I also cannot send a text, it immediately goes to 'failed message'.
I tried setting my phone back to LTE/CDMA/EvDo, but I don't see an option for CDMA subscription. I wonder if I accidentally tried a Global ROM instead? All I am really looking for is some 4.2 love, I like what my daughters Nexus 4 has for lock screen widgets, and my Cleanrom installation is acting a little wonky now and again, so thought it was time to flash something new. Silly rabbit, trix are for kids.
Thanks again. Thinking of flashing a stock ROM and starting over. Any thoughts?
Click to expand...
Click to collapse
follow my last post; Mastamoon has his version of CM10.2 (4.3) running great, and is very quick at answers (during the week that is) as well a couple of other DEVs that follow that tread are always willing to offer help. AND he has a download app, that once you install will tell you when there is an update, give you a direct link to it, and after downloading, will check the MD5 to insure a good download.
providing you are on VZW that is.
I actually had this problem coming from hyper drive to dirty Unicorn. But i started out on the Droid X back in the day so I was used to it. While I don't know if this really works but it worked for me is do *22899 then *228# ( so the keyboard pops up ) i did it a few times also i turned it off the cell service and turned it back on using the toggle. While i dont know if that will do it it worked for me. I know LTE dont need do that because of the sim but it does for me in the hiccup.
A question i have that i cant post in the Dev Fourm because of lack of post. I been part of XDA for long time just never posted. But I'm running Dirty Unicorn and theres a option for fast charge but it does nothing. I've used this feature before and makes my car charger work better and home charging and my battery sucks now but does anyone know how to get it working? I've tried terminal did SU and FFC but nothing.
I'm running twrp recovery. I'm asuming the latetest version. And i do let it settle for a while. As for the settings you mentioned, everything is normal,and as it should be. The imei,meid, ect. Is normal. Thanks for the input.
I've fixed this by going full ODIN, putting a stock image back on, and following the instructions at http://forum.xda-developers.com/showthread.php?t=2066133 Seems to be working, it is no longer on roaming.
Tim
wily5150 said:
I try to keep up with latest os, but 4.3 has me baffled. The first time I tried to install 4.3 was on Jellybam 10.2. I followed the instructions to the tee, but it didn't work. All 4.3 roms I've loaded I've never had a signal. I don't know what I'm doing wrong. Now that all of the 4.3 roms have the custom recovery already on the rom, it still doesn't work. I have no signal. I thought about unrooting my sg3 and starting over, but that is a pain. So I'm basically stuck with 4.2.2. If anyone has anything to say about my problem please do so. Thanks
Click to expand...
Click to collapse
When I tried 4.2 and turned off data it completely killed my signal. None of my recoveries of 4.1.2 had signal. Flashing back to stock fixed the signal problem.
Hellfire and Dirty Unicorns have worked great for me since going to 4.3 and 4.3.1. I use cwm touch recovery but idk how much of an effect recovery has with flashing a rom successfully.
But this tool makes rooting, unlocking the bootloader, and recovery very simple and easy. (but I would flash the latest recovery after using the tool just in case)
http://forum.xda-developers.com/showthread.php?t=2332825
jailbreaktoroot said:
I actually had this problem coming from hyper drive to dirty Unicorn. But i started out on the Droid X back in the day so I was used to it. While I don't know if this really works but it worked for me is do *22899 then *228# ( so the keyboard pops up ) i did it a few times also i turned it off the cell service and turned it back on using the toggle. While i dont know if that will do it it worked for me. I know LTE dont need do that because of the sim but it does for me in the hiccup.
A question i have that i cant post in the Dev Fourm because of lack of post. I been part of XDA for long time just never posted. But I'm running Dirty Unicorn and theres a option for fast charge but it does nothing. I've used this feature before and makes my car charger work better and home charging and my battery sucks now but does anyone know how to get it working? I've tried terminal did SU and FFC but nothing.
Click to expand...
Click to collapse
I believe fast charge is kernel related and not because of a rom. I haven't ever used fast charge but all the kernel threads always list fast charge as a feature. But which DU build are you running?
Hey all,
Ugh, didn't mean to post yet!
I just updated from CM9 to 10.2 in the hopes it might fix this bug, but it didn't. I suspect then that it's not ANYTHING to do with a ROM per se but I'm perplexed as to what it is.
The behaviour is:
- I get a voice mail
- After listening to the voice mail, deleting it, and hanging up, the notification doesn't disappear
- Some time later, I get a repeat notification of the voice mail
- During this time, I can't receive any texts
- About a DAY later, the phone will realize that voice mail actually has been deleted
I've tried searching xda, and I've tried general googling, but I haven't pinned anything down. I've seen some references to what might be a similar bug, but not with these ROMs, and... honestly a couple of YEARS ago.
ccamfield said:
Hey all,
Ugh, didn't mean to post yet!
I just updated from CM9 to 10.2 in the hopes it might fix this bug, but it didn't. I suspect then that it's not ANYTHING to do with a ROM per se but I'm perplexed as to what it is.
The behaviour is:
- I get a voice mail
- After listening to the voice mail, deleting it, and hanging up, the notification doesn't disappear
- Some time later, I get a repeat notification of the voice mail
- During this time, I can't receive any texts
- About a DAY later, the phone will realize that voice mail actually has been deleted
I've tried searching xda, and I've tried general googling, but I haven't pinned anything down. I've seen some references to what might be a similar bug, but not with these ROMs, and... honestly a couple of YEARS ago.
Click to expand...
Click to collapse
I have not seen this on any of my T-Mobile phones....did you do a full wipe before flashing CM10.2..
Which 10.2 Rom did you flash..
You Might have to one-click back to
stock.
That should fix it..then work back up.
Sent from my SM-G900T using XDA Premium 4 mobile app
Well, I did do a factory reset.
Is resetting to the stock ROM actually guaranteed to, well, basically format /system?
(Oh, and I flashed this ROM: http://forum.xda-developers.com/showthread.php?t=2451317 )
P.S. see here for someone's... probably unorthodox solution to the problem. Basically seems to be forcing # of voice mail notifications to 0. Which isnt really what I want, anyway.
http://forum.xda-developers.com/goo...w-to-sprint-fix-persistent-voicemail-t2562262
ccamfield said:
Well, I did do a factory reset.
Is resetting to the stock ROM actually guaranteed to, well, basically format /system?
(Oh, and I flashed this ROM: http://forum.xda-developers.com/showthread.php?t=2451317 )
P.S. see here for someone's... probably unorthodox solution to the problem. Basically seems to be forcing # of voice mail notifications to 0. Which isnt really what I want, anyway.
http://forum.xda-developers.com/goo...w-to-sprint-fix-persistent-voicemail-t2562262
Click to expand...
Click to collapse
That looks like a work-around not a solution. .
Yeah if you odin back to stock...
Its a guarantee it will format your system partition..
Try gremlin remover its always worked for me and odin is pretty simple..follow the OP its a one-click pre-made odin setup so dont change anything and your good.
http://forum.xda-developers.com/showthread.php?t=1500427
Once your back to stock...
And the problem is fixed.
I always went to Team Acids CM9.
Let the partitions convert..
Then on to CM10.2 or whatever..
Never had a problem this way..
Sent from my SM-G900T using XDA Premium 4 mobile app
hutson23 said:
That looks like a work-around not a solution. .
Yeah if you odin back to stock...
Its a guarantee it will format your system partition..
Try gremlin remover its always worked for me and odin is pretty simple..follow the OP its a one-click pre-made odin setup so dont change anything and your good.
http://forum.xda-developers.com/showthread.php?t=1500427
Once your back to stock...
And the problem is fixed.
I always went to Team Acids CM9.
Let the partitions convert..
Then on to CM10.2 or whatever..
Never had a problem this way..
Click to expand...
Click to collapse
Unfortunately, I have the 959W rather than the 959V so I can't use it.
And I remember upgrading from gingerbread to CM9 was a lot tougher than I expected (I think getting the drivers to work right) and I had to get a LOT of help from a member here on the forum. IIRC there were a lot more reboots required of the phone / my PC to get things to work.
All in all I probably shouldn't mess around with ROMs. Hardware problems make me angry and frustrated.
ccamfield said:
Unfortunately, I have the 959W rather than the 959V so I can't use it.
And I remember upgrading from gingerbread to CM9 was a lot tougher than I expected (I think getting the drivers to work right) and I had to get a LOT of help from a member here on the forum. IIRC there were a lot more reboots required of the phone / my PC to get things to work.
All in all I probably shouldn't mess around with ROMs. Hardware problems make me angry and frustrated.
Click to expand...
Click to collapse
O..didn't know you had the T959w..
Well I have seen something similar
On the Samsung GS4G Blaze..
They had a call fowarding bug that was carrying over on Roms..
It was something in CM11 that they
Figured was being written on the
Sim Card..and it was even carrying over to any Rom you flashed..
Once you got it... it didn't matter
what Rom you installed
full wipe or not it stuck..
They have Offical CM11 and the
CM team fixed it..but I remember it took a couple weeks..
Have you tried getting another
Sim Card..couldn't hurt..
Have you tried Force closing the
Phone Apk.and clearing data..
Also found this..
Here's what just worked for me on my Tmobile Galaxy S III
1) Pull the battery
2) Wait a few minutes with the battery out (I waited 5 minutes)
3) Pull the SIM card
4) Replace battery and power up phone. Wait until phone is fully booted
5) Power down phone
6) Replace SIM card and power up
Annoying VoiceMail icon is now gone.
BTW.. I hate the voice mail notification...
I wish people would
Never leave me a voice mail..LOL..
Sent from my SM-G900T using XDA Premium 4 mobile app
Oh huh, I missed your reply till now.
I think force closing the phone app and clearing caches works but ONLY temporarily and then the problem reoccurs (when the phone decides to check for more voice messages?)
Man if this was something being written on the sim card and not a ROM thing that'd be really annoying. But couldn't I "just" wipe the whole sim card? That's gotta be possible, right?
I'm trying the pull-battery-and-sim-card just to see what happens.
On the plus side I found some old posts of mine on the forum and realized that I only ever used this new computer for flashing stuff. So I just have to figure out which USB port worked last time... the usb drivers should still be installed and everything.
^ Just curious what modem are you using? Is it patched to work on MTD partitions layout? Is it the stock one from Wind the Canadian carrier?
Try using modem LB6 for 959w/v patched to work for mtd roms, hope this will fix the issue.
Rebel_X said:
^ Just curious what modem are you using? Is it patched to work on MTD partitions layout? Is it the stock one from Wind the Canadian carrier?
Try using modem LB6 for 959w/v patched to work for mtd roms, hope this will fix the issue.
Click to expand...
Click to collapse
I believe I am using the LB6 - certainly, I'm not using the stock. (The only confusion is that I've got zip files on my PC for the LB6 and a KG4 modem.)
Whatever modem I have on my phone was working fine prior to some upgrade of CM9 (IIRC).
God!!!
So I got Heimdall working again, flashed to stock, reformatted my SD card, re-updated to CM10... and I'm getting the same problem again!
So either it's the CM 10 ROM or something with my phone company! GRRRR...
Maybe the next step is to go back to stock and then just try CM 9. Or even CM 7 or something... put a modem on the stock ROM and see if THAT still ****s up.
Aaaaand stock + LB6 modem gets the voice mail notifications.
!%()*!%()*!#% phone company!