Related
Hey I was wondering if anyone else was having wifi connection issues with the xoom? Every time I use my xoom I have to keep retrying to load the market, webpages and everything else that uses data. Usually have to reload the market around 3-5 times to get it to work. I have tried 2 different routers and stilll the same thing. Please let me know if anyone else is having this issue and if there is a way to fix it. Thanks
P.s. When Im on 3G everything is fine
I get it but only with Market, I assumed it was a market issue.
On. 3G, for me, everything is dog slow, but I never get the Retry box.
Sent from my Xoom using XDA App
slyty71 said:
Hey I was wondering if anyone else was having wifi connection issues with the xoom? Every time I use my xoom I have to keep retrying to load the market, webpages and everything else that uses data. Usually have to reload the market around 3-5 times to get it to work. I have tried 2 different routers and stilll the same thing. Please let me know if anyone else is having this issue and if there is a way to fix it. Thanks
P.s. When Im on 3G everything is fine
Click to expand...
Click to collapse
Mine works perfect with my AT&T U-Verse gateway and tethered to my AT&T captivate. No problems here at all with wifi. Do you have problems with other wifi routers? Go to Starbucks or a friends and see if the same issue occurs. If not, there is something with your router that Xoom does not like.
I'm having WiFi issues as well. I don't have any issues with any other laptops in my house ... but my Xoom ... get very poor signal on WiFi and sometimes doesn't get any connection at all. This is serious buzz kill.
Mine is also choking on wifi. Switch to 3g and no problems. Annoying.
Sent from my Xoom using XDA Premium App
srafail said:
get very poor signal on WiFi and sometimes doesn't get any connection at all. This is serious buzz kill.
Click to expand...
Click to collapse
Hardly surpisring when the antenna is surrounded by glass and plastic
Wifi is suspect on the Xoom. I cannot get a connection to my secure wireless at work but I can connect to the less secure guest wireless network. I also could not initially tether with my phone (TMobile Vibrant) but after I downloaded Mobile AP I was able to tether just fine and have not had any issues since then.
No complaints here to report. I'm pulling in on average a speed of 17mbps download on most days from my home wifi network. Quite the speedy little guy my Xoom is.
WiFi hasnt been a problem for me either.
So far, I've used it on 4 different wireless networks (G and N/G), using various security options and I connect to each without fail. Hell, Ive even seen the Xoom connect to WiFi when driving down the street towards places that I have it configured to see.
I did have some trouble at one point due to my DNS and DHCP servers being offline. I didnt suspect any issues with them, so I spent more time than I should have troubleshooting the Xoom.
slyty71 said:
Hey I was wondering if anyone else was having wifi connection issues with the xoom? Every time I use my xoom I have to keep retrying to load the market, webpages and everything else that uses data. Usually have to reload the market around 3-5 times to get it to work. I have tried 2 different routers and stilll the same thing. Please let me know if anyone else is having this issue and if there is a way to fix it. Thanks
P.s. When Im on 3G everything is fine
Click to expand...
Click to collapse
Known problem... see:
http://forum.xda-developers.com/showthread.php?t=985536&highlight=wifi
Always Connecting...
Greetings All,
I have been having issues as well after the update. The wireless always disconnects and connects and doesn't stay connected. No problems with my Droid X or laptop or other device.
Problem is that now I'm getting very close to going over my data plan.
Is there a fix in the works, since it worked perfectly with 3.0
Annoyed...
OS
UPDATE: Uninstalled the leaked Flash 10.2 and that has fixed the problem, somewhat. Still disconnects, but less.
slyty71 said:
Hey I was wondering if anyone else was having wifi connection issues with the xoom? Every time I use my xoom I have to keep retrying to load the market, webpages and everything else that uses data. Usually have to reload the market around 3-5 times to get it to work. I have tried 2 different routers and stilll the same thing. Please let me know if anyone else is having this issue and if there is a way to fix it. Thanks
P.s. When Im on 3G everything is fine
Click to expand...
Click to collapse
No it doesnt happen to me.
Glad I found this. Yes mine doea it too. If I linger on a webpage for more than 30 seconds or so, it disconnects. (Yes I have all settings set correctly) same issue with market and now facebook and twitter app after the update. No connection or synchronization failed.
Sent from my DROIDX using XDA App
Wireless issue fixed....
Greetings again,
Even after uninstalling flash, the problem persisted somewhat. I was getting very frustrated and so I reset the xoom to factory settings. A few notes on that. All applications were reinstalled, through the market which is good and bad.
So far, after 2 days of heavy wireless use, not a single drop in wifi connectivity.
Hope this helps...
OS
slyty71 said:
Hey I was wondering if anyone else was having wifi connection issues with the xoom? Every time I use my xoom I have to keep retrying to load the market, webpages and everything else that uses data. Usually have to reload the market around 3-5 times to get it to work. I have tried 2 different routers and stilll the same thing. Please let me know if anyone else is having this issue and if there is a way to fix it. Thanks
P.s. When Im on 3G everything is fine
Click to expand...
Click to collapse
So far my wireless is great. I use WP2 Secure at home, a WEP at my parents, and a MAC based approval network at work. All are steady with full bars and no issues.
SleeplessNinja
MyXoomChannel http://www.youtube.com/sleeplessninjas
Its the encrypton protocol, WPA2 with AES will cause problems.
TKIP works.
I also have random issues. Some days its just fine, but other days wifi works and then stops working, usually a reboot fixes it.
Must be some wifi issue.
I have a fully factory stock xoom and have had NO wy fy problems at all! internet conection firm and stable. I intend not to root my zoom untill all the important updates are done and stable. I also am waiting for my 4G card install. I have WPA2 with AES and the xoom conected to it with NO problem
I haven't had any problems with mine whatsoever. I think it could be your router. My Xoom stays connected with my router and I haven't had a single problem so far with connected wifi.
My PS3 needs a router reset every single time I want to play Black Ops though.
ihad this issue. I think it may be hioneycomb and not xoom related because I experienced it on the acer iconia. The good news is that I resolved my connection issue with wifi. On the surface it looks like a dhcp handshake issue so, if you assign your xoom a static ip from your router, the issue goes away and all is good.
I have been keeping up with the updates hopeing each one will fix my problem but not yet. I don't see others with the issue.
I'm running the latest Test4(Test3) using Slayhers stock kernel. Everything works awesome except intermittently I lose connection whether I'm using Wifi or 3G(No 4G in my area). The only way I've found to get it back is reboot.
Is this a widespread issue or just me?
Same issue here. I live in 4G area. Intermintent Data Loss. If i switch to CDMA i get a 3G but CDMA/LTE i get nothing. I had data allday yesterday but none today.
I think the RIL is still being worked out. Bear in mind that this is a Pre Alpha Pre release. Also LTE is something completely new to the world of CM and to American cell phones. I've run CM on 3 different devices and I will tell you that by the time nightlies roll around, it will be near perfect. The CM team won't put their name behind something that is half working, half assed, etc. Be patient.
I had the same problem but now I have a small problem. I have a very fast wifi setup at home but it doesn't like to actually connect to it. Looks like 3G is riding shotgun for a while.
Sent from my ThunderBolt using XDA Premium App
dankpupdaddy said:
I had the same problem but now I have a small problem. I have a very fast wifi setup at home but it doesn't like to actually connect to it. Looks like 3G is riding shotgun for a while.
Sent from my ThunderBolt using XDA Premium App
Click to expand...
Click to collapse
One thing I read about the WIFI is, try turning the WIFI on then reboot with the WIFI on to see if you then connect.
Yeah, I think we'll all be experiencing this until the crew addresses it in a future update. However, it is still a great start. Not a whole lot of major issues, no deal breakers. I'm still using it as my DD.
Definately!!! I love the cm7 build and I'm thankful for all the work. Just wasn't sure if there was an easy fix I had missed.
Thanks all!
Sent from my ADR6400L using XDA App
I've tried every AOSP Rom/Kernel variations and I can't get anything to stay USB 4g tethered for more then 5 minutes. Tshed was flying with stock CM7 USB tether and then all of the sudden doesn't work. I tried all AOSP Roms. And wired-tether 1.4 is what I use. Please help me out. I have this phone for another year and that's all I'm missing. Please help. A trick, known set up, etc maybe. Anything not to have to reset the app every 3-5 minutes or so. I can't believe I haven't seen this brought up lately? Is it only me?
Sent from my HTC ThunderBolt using Tapatalk
Have u tried pda net?
Sent from my SCH-I405 using XDA App
Yeah u have to install software on every PC u wanna use and that kinda sucks but I still get the frequent resets and they're connection is pretty slow. I have to reset pdanet, wired-tether 1.4, etc. Every few minutes. I used watershed 1.2 cm7 stock USB tether and it worked beautifully for about a day and then nothing. So I flashed imo's kernel and stock tether doesn't work at all but I have to reset wired-tether 1.4 every 3-5 minutes or so.
Sent from my HTC ThunderBolt using Tapatalk
I don't use USB tethering often, but when I do, the built in version always works perfectly. Tried it on OMFGB, liquid AOSP, and workshed CM7. An older version of Imo's kernel (version 4 I think) supports USB tethering.
Sent from my ADR6400L using Tapatalk
I use easy tether and have no issues. For wifi tether I use opengarden (faster than USB tether) don't have issues with either.
And its only when I try to use 4G. 3G will stay tethered all day long if i let it but its just way to slow. I usually get 15-20 Mbps down with USB tether 4g. Thats fast as hell. I wish I had a little Porto WiFi adapter for my work PC's. Cuz yeah when I wifi tether my AOKP TouchPad I dont have this problem.
There may be something wrong specifically with his ROM. I have USB Tethering working fine on my Sense-based ROM, but I tried his and it would work for 15 seconds and stop working, then never reconnect. I tried having something persistently connected to internet on my phone but that didn't help either.
I use the ClockworkMod Tether. Works on every ROM I've tried.
I was hoping I wasn't gonna have to resort to sense but I might have
to. I need this to just work. No installer PC ware
Sent from my ADR6400L using Tapatalk
Have you considered the issue is not your device, but your PC?
yareally said:
Have you considered the issue is not your device, but your PC?
Click to expand...
Click to collapse
Ive tried my Phenom2 x6 and 2 Diff. Core 2 Duo's (that's just my House).
A few Newer laptops. Wifi tether worked no problem, just alot slower then straight USB (when it works).
There were a few at work I tried and No good either.
Back when I first started bringing up this issue (Sept.) I was told It was a known 4g issue (By a great Dev who has since moved to the Razor, hint hint) and that's why there is no problem with 3 g tethering at all. Just wondering If someone had a set up that completely works with out having to reset every 5 Min or so. I think I had good Luck with ThunderShed 1.3 this weekend. I fell asleep FTPing some stuff from my friend (good size) and It was finished when I woke up. That's a good sign so far. I just need one person to see this thread that has the perfect setup for 4G USB Tethering, 24/7 if need be. It would be great to know.
KeithLing1115 said:
Ive tried my Phenom2 x6 and 2 Diff. Core 2 Duo's (that's just my House).
A few Newer laptops. Wifi tether worked no problem, just alot slower then straight USB (when it works).
There were a few at work I tried and No good either.
Back when I first started bringing up this issue (Sept.) I was told It was a known 4g issue (By a great Dev who has since moved to the Razor, hint hint) and that's why there is no problem with 3 g tethering at all. Just wondering If someone had a set up that completely works with out having to reset every 5 Min or so. I think I had good Luck with ThunderShed 1.3 this weekend. I fell asleep FTPing some stuff from my friend (good size) and It was finished when I woke up. That's a good sign so far. I just need one person to see this thread that has the perfect setup for 4G USB Tethering, 24/7 if need be. It would be great to know.
Click to expand...
Click to collapse
I always just used the built in wired tether with cm7. I had an issue once where it would drop in and out, but after doing a total reset and reloading cm7 once again, it was fine. I also don't use the DNS with the phone. I switch my DNS on my PC to be layer3 DNS (4.2.2.1 to 4.2.2.6). DNS is allegedly one of the ways they can track what device the transfer is coming from.
yareally said:
I always just used the built in wired tether with cm7. I had an issue once where it would drop in and out, but after doing a total reset and reloading cm7 once again, it was fine. I also don't use the DNS with the phone. I switch my DNS on my PC to be layer3 DNS (4.2.2.1 to 4.2.2.6). DNS is allegedly one of the ways they can track what device the transfer is coming from.
Click to expand...
Click to collapse
This could be big help. Im at work now but when I get home I will check into this more. Thanks so much. I can never get the built in USB tether to work from CM7. TShed's built in CM7 worked for a while then just cut out. The little name your connection from Win7 popped up but had no Internet at all. May be something to this. Thank you.
KeithLing1115 said:
This could be big help. Im at work now but when I get home I will check into this more. Thanks so much. I can never get the built in USB tether to work from CM7. TShed's built in CM7 worked for a while then just cut out. The little name your connection from Win7 popped up but had no Internet at all. May be something to this. Thank you.
Click to expand...
Click to collapse
Might also try disabling IPv6 and anything else not needed on the connection as it won't actually tether through it anyways. It could be causing a conflict somehow
yareally said:
Might also try disabling IPv6 and anything else not needed on the connection as it won't actually tether through it anyways. It could be causing a conflict somehow
Click to expand...
Click to collapse
So you are running which cm7. I am now running TShed 1.3 and stock tether was great for about 20 minutes. Then just stopped. So turned off tether reset mobile data and 3g 4g. Nothing. Not even wired 1.4 works. Rebooted a few times, I've been at this for bout an hour now and still nothing. Not even wired 1.4. So I switched from auto to 4.2.2.1-4.2.2.6 DNS. Thanks for that bit of info. Now do I have to do that every time? Anyway I'm frigging stuck here and I hear all these people's are working fine.
Sent from my ADR6400L using Tapatalk
KeithLing1115 said:
So you are running which cm7. I am now running TShed 1.3 and stock tether was great for about 20 minutes. Then just stopped. So turned off tether reset mobile data and 3g 4g. Nothing. Not even wired 1.4 works. Rebooted a few times, I've been at this for bout an hour now and still nothing. Not even wired 1.4. So I switched from auto to 4.2.2.1-4.2.2.6 DNS. Thanks for that bit of info. Now do I have to do that every time? Anyway I'm frigging stuck here and I hear all these people's are working fine.
Sent from my ADR6400L using Tapatalk
Click to expand...
Click to collapse
If you set the DNS on your PC, it should stay that way. You can always verify if you need to. But yeah, I used cm7 and the built in tether just fine.
yareally said:
If you set the DNS on your PC, it should stay that way. You can always verify if you need to. But yeah, I used cm7 and the built in tether just fine.
Click to expand...
Click to collapse
So every time my USB connection starts it gives me a new Connection(I'm up to like number 54. So I have to go in and set the DNS and disable ipv6 every time? How do I get my USB tether settings to stick on my Win7 Ultimate x64 every time I start my tether instead of it thinking its a brand new connection every time? I got ThunderShed 1.3(stock kernel) installed now and the stock tether isn't working but the wired-tether 1.4 is working great after a couple resets. It must have stuck for a few hours until I shut it off. That's great considering how bad of a time Ive been having.
RANT:
Now do you see how that "Thanks" button works? yareally is really trying to help me and has helped some, so I have hit the "Thanks".
That's how the "Thanks" button works.
KeithLing1115 said:
So every time my USB connection starts it gives me a new Connection(I'm up to like number 54. So I have to go in and set the DNS and disable ipv6 every time? How do I get my USB tether settings to stick on my Win7 Ultimate x64 every time I start my tether instead of it thinking its a brand new connection every time? I got ThunderShed 1.3(stock kernel) installed now and the stock tether isn't working but the wired-tether 1.4 is working great after a couple resets. It must have stuck for a few hours until I shut it off. That's great considering how bad of a time Ive been having.
RANT:
Now do you see how that "Thanks" button works? yareally is really trying to help me and has helped some, so I have hit the "Thanks".
That's how the "Thanks" button works.
Click to expand...
Click to collapse
Not sure why it keeps changing your connection number. It's never done that to me unless I've flashed a new ROM or something when I've used it on windows 7. Turning off and turning back on your wifi device might also do it (the one attached to your PC).
ive been posting this bug ive found all over but no one seems to have any ideas on how to fix it as it doesn't appear to effect many users. the issue is on any aosp based rom: cm10, aokp, slimbean, liquid..etc i get wifi errors such as wps failed and my router is out of range. this happens until i toggle off wifi and turn it back on. i always do fresh, clean install with full wipes before i flash the rom & gapps. ive tried everything including all different kernels to no avail. i know my router is ok because once i go back to any ics rom or jellywiz the wifi works fine. to me this sounds like a aosp kernel or wifi driver issue. how can i get this reported or looked into? as of now i know this effects myself and one other user ive talked to and he is stumped as well. i have a netgear wireless g router in case anybody wondered, current firmware as well. the devs ive reported this too seem to be ignoring my posts.
i seriously want to use one of the aosp roms but i cannot right now and it's driving me mad. any help or insight would be greatly appreciated.
ill also add i tried changing to different security settings on my router to no avail.
What router does this other user use? The one you said has the same issues. Similar to yours?
I don't use my phone on wifi very often so I dunno, but if he has one similar to yours I would say there's a problem with that router liking AOSP ROMs.
Its a netgear wireless g. He said he has a wireless n. If its the router, why does every ics rom work? Never heard of a router disliking aosp lol. Im wondering if the problem is using the newest clockworkmod touch recovery? Im just trying to troubleshoot. Ive tried everything else tbh. Never had a phone puke when trying aosp and i mean any aosp rom.
Doesnt anyone else use netgear routers?
fix-this! said:
Its a netgear wireless g. He said he has a wireless n. If its the router, why does every ics rom work? Never heard of a router disliking aosp lol. Im wondering if the problem is using the newest clockworkmod touch recovery? Im just trying to troubleshoot. Ive tried everything else tbh. Never had a phone puke when trying aosp and i mean any aosp rom.
Doesnt anyone else use netgear routers?
Click to expand...
Click to collapse
Someone fixed wifi with DNS server change. Don't know if it was same problem.
Speaking of dns i do use opendns on my pc. Just darn weird ics doesnt act up for me.
ICS has code made directly for our device/radios because that's what comes on our phones. Jelly bean, which all AOSP ROMs are based from, doesn't have any code made directly for ours. All the developers have ported it over to our devices and it will be imperfect until Verizon jelly bean comes out/gets leaked.
Brian Gove said:
ICS has code made directly for our device/radios because that's what comes on our phones. Jelly bean, which all AOSP ROMs are based from, doesn't have any code made directly for ours. All the developers have ported it over to our devices and it will be imperfect until Verizon jelly bean comes out/gets leaked.
Click to expand...
Click to collapse
Yeah thats what i figured. Just sucks i cannot use aosp in the meantime. Shocked more people are not having the same issue.
Got rid of opendns on my router and still a no go. Any other ideas guys? I feel left out not being able to use aosp. Gonna suck if i have to wait until the jb ota comes.
found a fix for anyone having issues with the wifi saying out of range or wps failed. go into your router settings and change your ssid name and password, restart your router and connect on your phone. worked great for me. don't now why this would happen on aosp roms but im glad i got it solved.
this can be closed now.
Never had this problem.
Android 4 Life
fix-this! said:
found a fix for anyone having issues with the wifi saying out of range or wps failed. go into your router settings and change your ssid name and password, restart your router and connect on your phone. worked great for me. don't now why this would happen on aosp roms but im glad i got it solved.
this can be closed now.
Click to expand...
Click to collapse
The best thing you can do is keep this in mind and help the next guys that posts about WiFi issues like yours. That would be huge if you did that.
fix-this! said:
found a fix for anyone having issues with the wifi saying out of range or wps failed. go into your router settings and change your ssid name and password, restart your router and connect on your phone. worked great for me. don't now why this would happen on aosp roms but im glad i got it solved.
this can be closed now.
Click to expand...
Click to collapse
I've seen a lot of people say that simply rebooting their router fixed wifi issues on their phone. Are you sure the reboot alone wasnt responsible for fixing the issue?
well the issue is back with a vengeance, nothing seems to work for me now.
Same here
fix-this! said:
well the issue is back with a vengeance, nothing seems to work for me now.
Click to expand...
Click to collapse
I've been a lurker for a while and created this account just to let you know I have the same issues but with a d2spr (sprint gs3). Only aosp roms and I've been through both slim bean and liquidsmooth rc9. It's definitely the phone, not the routers. With my phone, it only happens when I reboot for any reason. If I rebooted with wifi on, my toggles will still indicate that wifi is still on after the boot, but it will not receive any signal. Any networks that do show up in available networks state "out of range". Even if you were just connected to that network before the reboot and you are still in range it will state "out of range". Not until you toggle the wifi off, then back on, everything seems to correct itself until next boot. It has to be the wifi toggle in settings though and not the one on any widgets or any added to the notification tray. Weird. Any solutions on your end yet? Looks like it's been a few days without any updates.
I had this is issue and setting a static ip on my phone fixed it, it was a dhcp issue.
I just purchased a used HTC One X from the Rogers network and unlocked it. Before rooting it, on the Sense rom WiFi was working great. Very strong signal and it never dropped. Upon flashing CM10, it's not picking up my home network (which I know is working because I'm typing on it right now and the device was connecting to it earlier).
I downloaded WiFi analyzer and it's jumping between networks, some networks pop up and then disappear and then new ones pop up. WiFi is just acting very strange. I did all the appropriate wipes before flashing.
I found a lot of WiFi issues surrounding the international One X but I don't think this is a defect since it was working fine with Sense.
Does anyone else have any experience with this?
Thanks!
Just flashed back to a Sense rom, and low and behold my WiFi is working properly again.
I've had the same experience with CM10 (different nightlies) and AOKP, WiFi is just not reliable. I can connect just fine and the signal strength is the same as with Sense (including CleanROM) but at random times transfer speeds will go down or just drop completely, usually turning WiFi off and on fixes it but it happens again within a couple of hours.
I've tried a couple of tips from those threads like turning off the 5GHhz radio on my router but that doesn't seem to help
fabiancalvo said:
I've had the same experience with CM10 (different nightlies) and AOKP, WiFi is just not reliable. I can connect just fine and the signal strength is the same as with Sense (including CleanROM) but at random times transfer speeds will go down or just drop completely, usually turning WiFi off and on fixes it but it happens again within a couple of hours.
I've tried a couple of tips from those threads like turning off the 5GHhz radio on my router but that doesn't seem to help
Click to expand...
Click to collapse
I can't even detect my home network. There's a few of the neighbors networks that pop up on and off but it's not consistent.
I'm literally sitting on my workstation which is connected to my home network and I have full bars. On Sense, I also get full bars and WiFi works as expected.
TotalCrisis said:
I can't even detect my home network. There's a few of the neighbors networks that pop up on and off but it's not consistent.
I'm literally sitting on my workstation which is connected to my home network and I have full bars. On Sense, I also get full bars and WiFi works as expected.
Click to expand...
Click to collapse
I've had troubles as well with WIFI on my device running CM10. I've posted numerous time to the CM10 dev forum but nothing comes from it at all. I had very good wifi with the Oct nightlies but now my Wifi is chocked off and doesn't perform as expected. I've tried rebooting my modem, router, switch everything and still the same results. Is there anyway to bring some attention to this or figure out the problem?
Help others and myself figure this problem out, anyone?
beankid said:
I've had troubles as well with WIFI on my device running CM10. I've posted numerous time to the CM10 dev forum but nothing comes from it at all. I had very good wifi with the Oct nightlies but now my Wifi is chocked off and doesn't perform as expected. I've tried rebooting my modem, router, switch everything and still the same results. Is there anyway to bring some attention to this or figure out the problem?
Help others and myself figure this problem out, anyone?
Click to expand...
Click to collapse
Are you on the stock kernel for CM10? Try flashing another kernel. It could be a kernel issue that you're having. I had this problem When I flashed PACman, and all i did was just flash Rohan's Build 5 and now my WiFi is working just fine.
Myrder said:
Are you on the stock kernel for CM10? Try flashing another kernel. It could be a kernel issue that you're having. I had this problem When I flashed PACman, and all i did was just flash Rohan's Build 5 and now my WiFi is working just fine.
Click to expand...
Click to collapse
I'll download rohans kernel as I've been using the built-in Kernal with that comes with CM10.
**Edit: I've installed RoHan's kernel but still the results are the same. The wifi and network become grayed out from time to time and websites fail to load. I know my home connection isn't quite that fast but there is no reason that the connection all together would drop.
my wifi icon on cm10 just turns grey after a while and doesn't receive any data. So i have to toggle it off and then on again to get it to work again
Sent from my One X using Tapatalk 2
The CM10 stable rom is out for the LTE One X. I'm going to give it a go and see if any thing changes.
Check your region code under Wifi -> Menu -> Advanced Settings -> Region Code
Make sure it's under US (or wherever you are), reboot and see if that helps.
stnguyen09 said:
Check your region code under Wifi -> Menu -> Advanced Settings -> Region Code
Make sure it's under US (or wherever you are), reboot and see if that helps.
Click to expand...
Click to collapse
I'm located in Canada, and I've tried setting it to US and Canada. No dice.
I tried the a different kernel, CM10 nightly, CM10 stable, AOKP, and none of them are working.
I'm having a similar problem. My wifi won't turn on for some reason. It's related to the phone hardware, not my network. And I'm only seeing this problem when flashing the most recent nightly of CM10.
I'm not sure what else to try. Any ideas?
I've tried rohan's kernel as well as setting the region for the WiFi adapter but eventually it happens again. It's not as bad as some of the other posts I've seen, but it does kill data through WiFi at some point and transfer speeds drop.
Is there anyway to get further data on this? I know that my phone doesn't have the hardware "bug" first reported with a few of the devices. Any logs or error reports we can try and gather?
I managed to connect to my home wifi which I was previously unable to connect to, I had to change my router's wireless signal channel from 13 to 1. I am able to hold a signal fine, however I know many of my neighbors networks are not showing up like they should. Similarly, I am also unable to pick up my university network at school.
As I've said, Wifi works fine on Sense.
Is there any way I can help with error reporting in any way? I don't mind donating a bit of money to the CM team and help them get some logs.
It's nice to know I'm not the only one affected.
I would have to say this is completely a Kernel problem. I am having a similar issue in cm10 on N7000. But it's only happens to the some of the routers.
My house's router is a d-link product. And when you are connected you will having no issue, but once you restarted your phone you are getting trouble to reboot the router once to get your self connected again, in the phone, the wifi will stating "Connecting" like forever.
But I am not getting the same trouble when I am with my company's wifi and the Wifi of my friends lynsys. So its hard to tell the developer about this issue because it's not happens to all people. I hopes this info helps. Reboot the router usually works for me.
Sent from my GT-N7000 using Tapatalk 2
yiwsg said:
I would have to say this is completely a Kernel problem. I am having a similar issue in cm10 on N7000. But it's only happens to the some of the routers.
My house's router is a d-link product. And when you are connected you will having no issue, but once you restarted your phone you are getting trouble to reboot the router once to get your self connected again, in the phone, the wifi will stating "Connecting" like forever.
But I am not getting the same trouble when I am with my company's wifi and the Wifi of my friends lynsys. So its hard to tell the developer about this issue because it's not happens to all people. I hopes this info helps. Reboot the router usually works for me.
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Unfortunately it's not always possible to reboot the router.
Like I said, I can confirm this issue and anything I can do to help I will try to provide.
These issues with CM10 and the new AOSP will almost make me *shutter's to think this thought* move back to sense.....I'm just not sure what to do. Should we link this to the dev thread?
Edit: I've captured a logcat from me turning on wifi, connecting to a website, and loading a second website to see the behavior. PM me if this would be of use.
This is the only reason I'm using a Sense-based ROM (CleanROM), nightly builds for CM10 run great and I have no other issues, but this one is kind of a deal-breaker for me.
beankid said:
These issues with CM10 and the new AOSP will almost make me *shutter's to think this thought* move back to sense.....I'm just not sure what to do. Should we link this to the dev thread?
Edit: I've captured a logcat from me turning on wifi, connecting to a website, and loading a second website to see the behavior. PM me if this would be of use.
Click to expand...
Click to collapse
Would it be possible for us to get in contact with a developer?
How would I go about getting a logcat of my own?
fabiancalvo said:
This is the only reason I'm using a Sense-based ROM (CleanROM), nightly builds for CM10 run great and I have no other issues, but this one is kind of a deal-breaker for me.
Click to expand...
Click to collapse
I feel you man. I'm sticking with AOSP because I managed to at least get my home network working but it's definitely annoying not being able to get onto my university network.