Ok, so I'm running cm7.2 and Ive used Trinity and faux123 kernels but when I'm trying to play modern combat 3 the frame rate is choppy and the game lags. This doesn't happen on the stock root or stock kernel. I was wondering if there where any other good kernels that are great for running games with heavy graphics and will run the game smoothly like the stock root kernel or if there is, can someone help me find a stock g2x kernel that has been ported for cm7. Thanks
joker550 said:
Ok, so I'm running cm7.2 and Ive used Trinity and faux123 kernels but when I'm trying to play modern combat 3 the frame rate is choppy and the game lags. This doesn't happen on the stock root or stock kernel. I was wondering if there where any other good kernels that are great for running games with heavy graphics and will run the game smoothly like the stock root kernel or if there is, can someone help me find a stock g2x kernel that has been ported for cm7. Thanks
Click to expand...
Click to collapse
are you undervolting or overclocking?
ive used many a trinity and faux kernel, and solely use faux 54 for my daily driver, and mc3 plays perfect for me.
it has to be a tweak or rouge app causing the issue.
Iconia A100 CM10 PRIVATE BUILD, TabletUI, Updated to 11/03/12 Source; godmachine v2.0 kernel
justjackyl said:
are you undervolting or overclocking?
ive used many a trinity and faux kernel, and solely use faux 54 for my daily driver, and mc3 plays perfect for me.
it has to be a tweak or rouge app causing the issue.
Iconia A100 CM10 PRIVATE BUILD, TabletUI, Updated to 11/03/12 Source; godmac.hine v2.0 kernel
Click to expand...
Click to collapse
Well on the faux123 and Trinity kernels I have to overclock for the game to run smoothly but it overheats and at 1-1.2ghz its lagging and frame rate seems to be low. but on stock root and stock kernel at 1ghz the game runs smoothly and no lag. Immaterial try the newest faux kernel vs54 what rom and kernel are you using so I can check and see if my rom is the issue. Thank you ill post back if the updated kernel doesn't do the trick.
My setup? Look down. Lol
Are there any other tweaks or performance settings you are using?
I'd install the rom in my signature, with no kernel, no tweaks, go right to running mc3 and see what happens.
Make sure you are wiping in CWM :
Factory/Data Reset
Format cache
Format dalvik cache
Format system partition
Than flash ROM and gapps.
Test that first.
G2x-temasek CM7 build135.4 w/faux 054 kernel
justjackyl said:
My setup? Look down. Lol
Are there any other tweaks or performance settings you are using?
I'd install the rom in my signature, with no kernel, no tweaks, go right to running mc3 and see what happens.
Make sure you are wiping in CWM :
Factory/Data Reset
Format cache
Format dalvik cache
Format system partition
Than flash ROM and gapps.
Test that first.
G2x-temasek CM7 build135.4 w/faux 054 kernel
Click to expand...
Click to collapse
Tried it. Still stutter online maybe its the application do u have a link from where u downloaded it from? Or ill just stick to stock until cm10 thanks for your help tho.
joker550 said:
Tried it. Still stutter online maybe its the application do u have a link from where u downloaded it from? Or ill just stick to stock until cm10 thanks for your help tho.
Click to expand...
Click to collapse
a link for what? game, rom, kernel?
Iconia A100 CM10 BUILD TESTER; godmachine v2.0 kernel
justjackyl said:
a link for what? game, rom, kernel?
Iconia A100 CM10 BUILD TESTER; godmachine v2.0 kernel
Click to expand...
Click to collapse
MC3.apk
joker550 said:
MC3.apk
Click to expand...
Click to collapse
I don't pirate.
I download and install via playstore...
G2x-temasek CM7 build135.4 w/faux 054 kernel
Related
Found New Rom in htc spain
ROM 20B in stock .. zip roteada CWR
-Roteada, superuser -Boot at 1150 OC We thank Comrade estrajo BERIARU that the boot of the 20B and has served us to make the OC causes the kernel l
Installation -From the recovery .. do not forget WIPES This intestate. (Just me). If there is any bug report it, but should only appear who are on official
http://www.wuala.com/jechus/ROMS/
Say thx Tor acura and when like press THX button
trying now
cjx75 said:
trying now
Click to expand...
Click to collapse
Same here.
Is there any other boot versions? The samba beta v2 had many to choose from.
Nope. Only one. But I am able to use with Samba boot option. So far so good. never hanged or ghost call.
Just installed over samba rom without any wipe. Used original boot from samba, i never overclock my phone. Everything is smooth, some apps are missing (cell broadcast widget :-( , whatsapp...) and some are added, some NeverWillUse buddy apps etc. I will definetly stay on this rom for some time.
Sent from my LG-P920 using XDA App
very nice, stable and smooth rom. (installed on german p920 over v21 thiaiz clean v.0.2)
Jechus said on htcspain.com that this rom is almos the same as samba, and that the final samba will be out soon. I wish samba will have gpu oc @400 MHz..
IFLPI
I wish samba will have gpu oc @400 MHz.
+1
Anyone know the difference between this and the AcuraTeam_20A_stock_SAMBA_.zip that is now showing in the download link?
Ok found 1 flaw so far , the camera fc and the phone reboots when u open the camera app in landscape mode.
overall a smooth rom
douglam said:
Anyone know the difference between this and the AcuraTeam_20A_stock_SAMBA_.zip that is now showing in the download link?
Click to expand...
Click to collapse
One is four p920
Other p920h
kampfbestie said:
One is four p920
Other p920h
Click to expand...
Click to collapse
Thanks. I have the p920, but I have tried the samba beta before and it works well for me as well. So is there a real difference?
Tested also both and didnt saw a difference
For dayly use im using rushdroid (modificated samba) also p920h
kampfbestie said:
Tested also both and didnt saw a difference
For dayly use im using rushdroid (modificated samba) also p920h
Click to expand...
Click to collapse
I would like to try rushdroid, but unfortunately there is only one OC speed at 1.2ghz and my phone is not really stable at that high OC. 1.15ghz is the highest it will go.
douglam said:
I would like to try rushdroid, but unfortunately there is only one OC speed at 1.2ghz and my phone is not really stable at that high OC. 1.15ghz is the highest it will go.
Click to expand...
Click to collapse
Have at time only the 1188 killer kernel maybe at home more here the link
http://hotfile.com/dl/148223809/0d47003/Samba2020.1188-KIllers.zip.html
samba beta corruptus had two files, which are also present in rushdroid ...... "netcfg" and "run-as" in-Bin System should be replaced for proper functioning ... informing Rhus to the fix
...............................................................................................................................................................
Soon new boots with the new kernel to different roms OC.compatbles with both 20B and 20A
jechus said:
samba beta corruptus had two files, which are also present in rushdroid ...... "netcfg" and "run-as" in-Bin System should be replaced for proper functioning ... informing Rhus to the fix
...............................................................................................................................................................
Soon new boots with the new kernel to different roms OC.compatbles with both 20B and 20A
Click to expand...
Click to collapse
Ok. Then I guess I should wait for the rushdroid to patch the ROM and release the different oc
boots before trying. 20B is good for me at the moment.
jechus said:
samba beta corruptus had two files, which are also present in rushdroid ...... "netcfg" and "run-as" in-Bin System should be replaced for proper functioning ... informing Rhus to the fix
...............................................................................................................................................................
Soon new boots with the new kernel to different roms OC.compatbles with both 20B and 20A
Click to expand...
Click to collapse
Nice. Would it be possible to make OC and undervolting kernel that will run 1,3GHz cpu and 400MHz gpu on Gingerbread rom as it is on Maximum Velocity froyo rom? I would like to have it on ginger cause I dont want to downgrade and flash Froyo baseband. It would be nice in a final Samba rom.
The BEST Rom for me!
Thanks
IFLPI said:
Nice. Would it be possible to make OC and undervolting kernel that will run 1,3GHz cpu and 400MHz gpu on Gingerbread rom as it is on Maximum Velocity froyo rom? I would like to have it on ginger cause I dont want to downgrade and flash Froyo baseband. It would be nice in a final Samba rom.
Click to expand...
Click to collapse
The kernel released by LG, for Ginger 21A ... does not work, does not the network coverage, and they have not fixed or released other.
Hi,
I have the rom revolution HD 3.4.2 on my tf101 and I would like to change the kernel. Which is the best for this rom? I tried guevor kernel but it doesn't work.
Thanks.
Any kernal ibwould use stock kernel because with tthqt rom stock works best
Sent from my PG86100 using xda premium
Ok, thanks for your answer.
There should be no reason why guevors kernel didn't work. Raymans kernel is close to stock with the addition of over clocking and more governors if you are worried about radical changes.
Actually, it's just when I flash kernel in CWM (wipe data and dalvik cache), my tablet reboot in the recovery each time and I have to reinstall my rom.
edit: testymeh and harmony kernel work but not guevor.
coco22500 said:
Hi,
I have the rom revolution HD 3.4.2 on my tf101 and I would like to change the kernel. Which is the best for this rom? I tried guevor kernel but it doesn't work.
Thanks.
Click to expand...
Click to collapse
The only other kernel other than the stock one ive used is Guevor v22.6. If that one didnt work as well for you then you should try his v1.1 kernel. Just install it through your custom recovery. Best of luck sir!
I flashed the kernel but when I conect to my PC, my tablet is not detected.
Someone has an idea?
I'm using guevor's kernel v22.6 with ARHD 3.4.2 and it's working fine.
No SOD no RR. Team Rogue touch recovery.
Thanks, works great
I can't seem to download Faux kernal nor Dragon, there files are missing? Is there any other kernels best stable with Weapon ROM?
Isn't Weapon a modified Stock ROM (2.3.3)?? You're only gonna be able to use Kernels for the stock ROMS. Faux is the only one I know of that has a kernel series for the Stock ROMS. Check out the link : http://forum.xda-developers.com/showthread.php?t=1102720
New2my8125 said:
Isn't Weapon a modified Stock ROM (2.3.3)?? You're only gonna be able to use Kernels for the stock ROMS. Faux is the only one I know of that has a kernel series for the Stock ROMS. Check out the link : http://forum.xda-developers.com/showthread.php?t=1102720
Click to expand...
Click to collapse
Well I read other people's combination and they had Weapon with Faux kernel but the dl link for Faux doesn't work. (Gingerbread)
I can upload them for you when I get home in 30 min
Sent from G2x running BuROM v0.2 (root; mod stock 2.3.4) w/ faux's GB kernel 014b2-ext4.
justjackyl said:
I can upload them for you when I get home in 30 min
Sent from G2x running BuROM v0.2 (root; mod stock 2.3.4) w/ faux's GB kernel 014b2-ext4.
Click to expand...
Click to collapse
Yes, please! And would you recommend faux kernel or trinity kernel?
Steeez said:
Yes, please! And would you recommend faux kernel or trinity kernel?
Click to expand...
Click to collapse
I've always used faux with stock ROMs.
I may be wrong, but I thought Trinity was for CM7 ROMs. I used it with the CM7 Nightly Build 135.1, worked great. But as for stock, I've always used the 2 faux kernels I've uploaded.
This is the latest faux GB kernel:
P999-GB-Kernel-014b2-ext4.zip
Linky: http://www.freefilehosting.net/p999-gb-kernel-014b2-ext4
If you have any issues, which I haven't had any thus far and been on my current setup for almost two weeks, you can try this older version:
P999-GB-Kernel-013_r2-ext4.zip
Linky: http://www.freefilehosting.net/p999-gb-kernel-013r2-ext4
I don't know your experience level with this stuff. You don't have to re-install the ROM when changing kernels. Just make sure you wipe/format "cache" and "dalvik cache". Let it boot up and don't do anything for ten minutes. Than reboot again and your good to go. This is how I have done it and I've rarely encountered any issues.
Let me know if this helps and I'll be around doing homework for my IT class, so feel free to post back or PM me directly.
Thanks! I'm going to try it right now. Have you used any other stock ROMs? If you did, which one would you prefer?
Steeez said:
Thanks! I'm going to try it right now. Have you used any other stock ROMs? If you did, which one would you prefer?
Click to expand...
Click to collapse
I've used dang near every single ROM available for our G2x.
Stock? It's a coin toss between BuROM and kwes's Rooted Stock. Personally I use BuROM as it is based off of kwes's ROM but a coulpe tweaks. The 2 I can remember off hand is the VM Heap Size is increased to 64MB and the SD read ahead size increased from 128KB to 2048KB. I think BuROM is just a hair faster than kwes's ROM.
BuROM: http://forum.xda-developers.com/showthread.php?t=1661610
kwes's Rooted Stock: http://forum.xda-developers.com/showthread.php?t=1602798
Both are 2.3.4.
I did use weapon, and I liked it. Can't remember why, but I switched back to 2.3.4 because there was something missing from Weapon's 2.3.3
What baseband are you on?
justjackyl said:
I've used dang near every single ROM available for our G2x.
Stock? It's a coin toss between BuROM and kwes's Rooted Stock. Personally I use BuROM as it is based off of kwes's ROM but a coulpe tweaks. The 2 I can remember off hand is the VM Heap Size is increased to 64MB and the SD read ahead size increased from 128KB to 2048KB. I think BuROM is just a hair faster than kwes's ROM.
BuROM: http://forum.xda-developers.com/showthread.php?t=1661610
kwes's Rooted Stock: http://forum.xda-developers.com/showthread.php?t=1602798
Both are 2.3.4.
I did use weapon, and I liked it. Can't remember why, but I switched back to 2.3.4 because there was something missing from Weapon's 2.3.3
What baseband are you on?
Click to expand...
Click to collapse
It's a long baseband lol My wifi isn't working.. :/
Steeez said:
It's a long baseband lol My wifi isn't working.. :/
Click to expand...
Click to collapse
Does it say March 2011 in it? We need to make sure you have the right baseband for the ROM your using or if we need to apply the new_baseband.zip patch to it.
Wifi not working? Hmmm...try GETRil from the playstore. But you need to make sure the baseband issue is correct first.
GETRil: https://play.google.com/store/apps/details?id=com.sibbor.getril&hl=en
justjackyl said:
Does it say March 2011 in it? We need to make sure you have the right baseband for the ROM your using or if we need to apply the new_baseband.zip patch to it.
Wifi not working? Hmmm...try GETRil from the playstore. But you need to make sure the baseband issue is correct first.
GETRil: https://play.google.com/store/apps/details?id=com.sibbor.getril&hl=en
Click to expand...
Click to collapse
Well I restore my system so i'm good now, I'm trying faux older version. So do you want me to tell you my whole baseband?
I tried the older version and everything works for.
If you have no clicks in your call audio when not using wifi calling, your good.
So what rom n kernel did you go with? My setup is in my signature.
Sent from G2x running BuROM v0.2 (root; mod stock 2.3.4) w/ faux's GB kernel 014b2-ext4.
Hi everyone,
there are already a few threads but not new.
so i want to learn your decisions about roms and kernels. I am using Eaglesblood 4.0.3 + trinity kernel right now, but i am not happy because it is not really stable. For example i cannot record 1080p !!! I want to use a stable rom and kernel. It has to be android 2.3.x or higher at least. By the way when I install harsh kernel my phone says your sd card and phone memory is damaged. I could not solve that problem.
Thank you
0b095 said:
Hi everyone,
there are already a few threads but not new.
so i want to learn your decisions about roms and kernels. I am using Eaglesblood 4.0.3 + trinity kernel right now, but i am not happy because it is not really stable. For example i cannot record 1080p !!! I want to use a stable rom and kernel. It has to be android 2.3.x or higher at least. By the way when I install harsh kernel my phone says your sd card and phone memory is damaged. I could not solve that problem.
Thank you
Click to expand...
Click to collapse
Stick with CM7 ROMS or Rooted Mod Stock ROMs.
My favorite is BuROM Modded Stock with Faux Kernel 14_b2
OR
CM7 Nightly 135.1 with Faux Kernel 52
CM 7.2 Official with Faux 52
CM 7.2 Nightlies and Faux v52 LG Stock stable
I believe we have a consensus starting,lol notice the trend?
Sent via Iconia A100 on CM10-b090212; godmachine v2.0 kernel; pio's build.prop mod
Temasek cm7 kang and faux stock right now pretty stable
Sent from my LG-P999 using xda premium
Cm7 nightly with trinity elp
Sent from my LG-P999 using Tapatalk
justjackyl said:
I believe we have a consensus starting,lol notice the trend?
Sent via Iconia A100 on CM10-b090212; godmachine v2.0 kernel; pio's build.prop mod
Click to expand...
Click to collapse
lol cm7.2 + faux won the consensus congrats..
I personally have issues with Trinity kernels that I don't have with faux. I say faux based off personal experience.
If you need any of his older kernels that are not available anymore, I have several GB and CM7 kernels of his uploaded . So if you want an older version, pm me for links.
Sent via G2x on CM7 b135.1 w/faux 52 kernel
justjackyl said:
I personally have issues with Trinity kernels that I don't have with faux. I say faux based off personal experience.
If you need any of his older kernels that are not available anymore, I have several GB and CM7 kernels of his uploaded . So if you want an older version, pm me for links.
Sent via G2x on CM7 b135.1 w/faux 52 kernel
Click to expand...
Click to collapse
http://faux.androidro.ms/archive/
justjackyl said:
I personally have issues with Trinity kernels that I don't have with faux. I say faux based off personal experience.
If you need any of his older kernels that are not available anymore, I have several GB and CM7 kernels of his uploaded . So if you want an older version, pm me for links.
Sent via G2x on CM7 b135.1 w/faux 52 kernel
Click to expand...
Click to collapse
thx i installed cm-7-20120930-NIGHTLY-p999.zip that rom and ''[email protected]#49'' just want to learn is that kernel what we are talking about ? Is it the lastest one ?
52 is newest.
http://faux.androidro.ms/P999-CM-Kernel-052-sv-lg-stable.zip
Sent via G2x on CM7 b135.1 w/faux 52 kernel
What's the difference between "P999-CM-Kernel-052-sv-lg-stable.zip" and "P999-CM-Kernel-052-sv-stable.zip" at http://faux.androidro.ms/?
And any idiots guides to installing rom/kernel? I want to install CM 7, currently using stock unrooted 2.3.4 and 21y.
helloha1 said:
What's the difference between "P999-CM-Kernel-052-sv-lg-stable.zip" and "P999-CM-Kernel-052-sv-stable.zip" at http://faux.androidro.ms/?
And any idiots guides to installing rom/kernel? I want to install CM 7, currently using stock unrooted 2.3.4 and 21y.
Click to expand...
Click to collapse
"lg" means low grade, that one is for phones that can't handle the higher CPU clock speeds.
Sent from my LG-P999 using xda app-developers app
getting back on topic...
another vote for trinity..
either CM 7.2 nightly + trinity elp or HFP 2.3 + trinity elp
Morfic's kernels work much better on my phone (LG-P999DW) + 21y baseband...
21e baseband *never* worked quite right for my phone, even on stock.
noahk423 said:
"lg" means low grade, that one is for phones that can't handle the higher CPU clock speeds.
Sent from my LG-P999 using xda app-developers app
Click to expand...
Click to collapse
aww...don't mess with the newbie! lol
Sent via G2x on CM7 b135.1 w/faux 52 kernel
helloha1 said:
What's the difference between "P999-CM-Kernel-052-sv-lg-stable.zip" and "P999-CM-Kernel-052-sv-stable.zip" at http://faux.androidro.ms/?
And any idiots guides to installing rom/kernel? I want to install CM 7, currently using stock unrooted 2.3.4 and 21y.
Click to expand...
Click to collapse
the LG means stock LG voltages and is unable to control undervolting. the other is for if you plan to undervolt with an app like SetCPU.
Sent via G2x on CM7 b135.1 w/faux 52 kernel
justjackyl said:
aww...don't mess with the newbie! lol
Sent via G2x on CM7 b135.1 w/faux 52 kernel
Click to expand...
Click to collapse
Legit! It really means 'low grade'. Hahaha
Sent from my LG-P999 using xda app-developers app
can someone post a link for BuROM Modded Stock??
m0bstr said:
can someone post a link for BuROM Modded Stock??
Click to expand...
Click to collapse
http://www.igottadroid.com/ModMarket/Listings/buru8981661610.html
Hello xda forums, I've done a lot of research and I can't find anything conclusive about this issue...
How do I flash a new kernel on my asus tf300t with custom rom cm10.1 nightlies? I want to do this because I can't overclock over 1.3 ghz .
I'm really happy with this rom on performence mode , but in heavier games like gta vice city it still lags a lot, so I'm guessing higher freq > better gamming experience. Please help this poor child :'( . And if I'm reposting or something, u have my sincere apologies.
Thank u so much for the help and I hope this post can help as many as possible.
Are you able to reboot into recovery mode? (Hold power, press reboot and select recovery)
If you can, just download the custom kernel .zip file and go back to recovery. Select 'install zip from sdcard', browse to and select the downloaded kernel.. reboot and enjoy
Sent from my LT18i
I use Cyanogenmod 10.1, CM's kernel is so good. Problem is in I/O. If you don't want to your apps lagging, you will have to move your apps to MicroSD class 10
zaki0saad said:
Are you able to reboot into recovery mode? (Hold power, press reboot and select recovery)
If you can, just download the custom kernel .zip file and go back to recovery. Select 'install zip from sdcard', browse to and select the downloaded kernel.. reboott from my LT18i
Click to expand...
Click to collapse
Hey man, my tablet is rooted and I have cwm recovery installed, so i can boot up the tablet and acess the cwm menu via powerbtn+vol down.
So yes I can flash roms and kernels, but now I ask?? Can I install any kernel having already cm10.1 installed?? If not please give me a list of safe kernels i can install changing cm10.1 kernel on my tf300t.
If this method is to risky maybe I should install other rom with higher costumable overcklock? If yes please recommend roms with overclock ranges higher than 1.3 ghz.
Thank u for ur help
absinto10 said:
Hey man, my tablet is rooted and I have cwm recovery installed, so i can boot up the tablet and acess the cwm menu via powerbtn+vol down.
So yes I can flash roms and kernels, but now I ask?? Can I install any kernel having already cm10.1 installed?? If not please give me a list of safe kernels i can install changing cm10.1 kernel on my tf300t.
If this method is to risky maybe I should install other rom with higher costumable overcklock? If yes please recommend roms with overclock ranges higher than 1.3 ghz.
Thank u for ur help
Click to expand...
Click to collapse
I think there is only one kernel for CM10.1 that you can safely flash and that is Surdu's kernel, what you need to do is get your CM10 zip file and open it with 7zip and then replace the kernel .blob file inside with the one you want to flash, close the zip and reflash your ROM, only wipe cache/dalvik and you should have a new kernel.
Another option is to try Surdu's CM10.1 build with its own kernel, that what I have and it runs great.
hope that helps.
Erik
ricco333 said:
I think there is only one kernel for CM10.1 that you can safely flash and that is Surdu's kernel, what you need to do is get your CM10 zip file and open it with 7zip and then replace the kernel .blob file inside with the one you want to flash, close the zip and reflash your ROM, only wipe cache/dalvik and you should have a new kernel.
Another option is to try Surdu's CM10.1 build with its own kernel, that what I have and it runs great.
hope that helps.
Erik
Click to expand...
Click to collapse
Hey man thank u so much . Just to be sure, so i download the leatest cm10.1.zip extract, change the blob kernel of cm10.1 with surdu's kernel, zip again, flash > wipe cache and dalvik and it is done?
Is it really safe? And after this change can i go higher then 1.3 ghz?
Sorry for being annoying but I just want to be sure.
Thank u so much
absinto10 said:
Hey man thank u so much . Just to be sure, so i download the leatest cm10.1.zip extract, change the blob kernel of cm10.1 with surdu's kernel, zip again, flash > wipe cache and dalvik and it is done?
Is it really safe? And after this change can i go higher then 1.3 ghz?
Sorry for being annoying but I just want to be sure.
Thank u so much
Click to expand...
Click to collapse
Yep, just like that, all you are doing is replacing the CM10 kernel with a compatible one. and yes Surdu's CM10.1 kernel has GPU overclock and also CPU overclock to 1.7ghz.
Erik
ricco333 said:
Yep, just like that, all you are doing is replacing the CM10 kernel with a compatible one. and yes Surdu's CM10.1 kernel has GPU overclock and also CPU overclock to 1.7ghz.
Erik
Click to expand...
Click to collapse
Thank u so much man. So just replacing the blob didn't really work so I had to install Surdo's cm10.1 over my installed rom(cm10.1 too)>then wipe dalvik + cache and voila
Now I can overclock to 1.7 ghz
Source of Surdo's cm10.1 oc to 1.7 ghz for tf300t: http://forum.xda-developers.com/showthread.php?t=2112369
Thank u once again and hope this post can help others with the same issue
Perf Kernel in the dev setion works GREAT on CM10.1 4.2.2 builds. Tunable with franco.Kernel Updated app :good: GPU settings on the fly, mine's set @ 512. The tablet oozes butter, it's that smooth
Ti2 said:
Perf Kernel in the dev setion works GREAT on CM10.1 4.2.2 builds. Table with franco.Kernel Updated app :good: GPU settings on the fly, mine's set @ 512. The tabt oozes butter, it's that smooth
Click to expand...
Click to collapse
Hello man, so i finally figure it out, how to use perf kernel in cm10.1, and OMG it's so freaking amazing I've tunned up my cpu speed between 200 mhz and 1600 mhz in interactive mode, when gamming I use performance mode up 1.7ghz and 706 mhz gpu... Well I hope I'm not pushing to much of little tf300t xD
Thank u so much Ti2.
Ps. I use trickster insted of f.kernel app... Works really good too
You want to clock down good GPU a tad, I think 706 is really pushing it. Stock is ~440, standard Perf setting is 600.
Ti2 said:
You want to clock down good GPU a tad, I think 706 is really pushing it. Stock is ~440, standard Perf setting is 600.
Click to expand...
Click to collapse
Yeah you are probably right. Gpu with 706 oc it's to much and very unstable. When I play heavy games like Vice city and nova 3, the best settings I've found were 1.7ghz performance mode and gpu with standart perf settings(600mhz). So if u want a stable gamming experience on the tf300t, I would recommend this settings.
help?
Hello. I've flashed CM 10.1 and perf kernel and it oc my cpu to 1.7, which is good' but I can't find where to oc my gpu, can you help me?