Hi,
I have the rom revolution HD 3.4.2 on my tf101 and I would like to change the kernel. Which is the best for this rom? I tried guevor kernel but it doesn't work.
Thanks.
Any kernal ibwould use stock kernel because with tthqt rom stock works best
Sent from my PG86100 using xda premium
Ok, thanks for your answer.
There should be no reason why guevors kernel didn't work. Raymans kernel is close to stock with the addition of over clocking and more governors if you are worried about radical changes.
Actually, it's just when I flash kernel in CWM (wipe data and dalvik cache), my tablet reboot in the recovery each time and I have to reinstall my rom.
edit: testymeh and harmony kernel work but not guevor.
coco22500 said:
Hi,
I have the rom revolution HD 3.4.2 on my tf101 and I would like to change the kernel. Which is the best for this rom? I tried guevor kernel but it doesn't work.
Thanks.
Click to expand...
Click to collapse
The only other kernel other than the stock one ive used is Guevor v22.6. If that one didnt work as well for you then you should try his v1.1 kernel. Just install it through your custom recovery. Best of luck sir!
I flashed the kernel but when I conect to my PC, my tablet is not detected.
Someone has an idea?
I'm using guevor's kernel v22.6 with ARHD 3.4.2 and it's working fine.
No SOD no RR. Team Rogue touch recovery.
Thanks, works great
Related
I've been searching here for a long time and looking at different custom ROMs but cannot find an answer. (so please be gentle on me if I missed the obvious...)
Is there a custom ROM for the TF101 which is not affected by the RR, SOD, bootloop, and all the other issues introduced in stock ICS?
Will appreciate the advice.
yud said:
I've been searching here for a long time and looking at different custom ROMs but cannot find an answer. (so please be gentle on me if I missed the obvious...)
Is there a custom ROM for the TF101 which is not affected by the RR, SOD, bootloop, and all the other issues introduced in stock ICS?
Will appreciate the advice.
Click to expand...
Click to collapse
I have used android revolution hd since it updated to ICS and not since the first ICS ota version have I seen a random reboot and I have never had a SOD
Get a new kernel
Your solution to SODs and ROR is getting a new kernel, the best one is to my point of view GUEVOR works, the last ones are great with stock rom.
werewolferx said:
Your solution to SODs and ROR is getting a new kernel, the best one is to my point of view GUEVOR works, the last ones are great with stock rom.
Click to expand...
Click to collapse
This is what you need to do. But, I would recommend either the 17c or 16b. I had a lot of SOD with the latest 19.2 kernel.
Thank you all!
I'm currently on stock .21
So confirming that what I need to do is:
Revert to an older, rootable stock ROM
Root
Then either:
Install Guevor kernel (with stock rom?)
or
Install Revoultion HD
Is this correct?
Yes, Guevor 17c is rock stable, so is the TestyMehIcs kernel. Both should do you good
ARHD on it's own (as mike tweaks the kernel) or with Guevor/testymeh is good too.
Thing O Doom said:
Yes, Guevor 17c is rock stable, so is the TestyMehIcs kernel. Both should do you good
ARHD on it's own (as mike tweaks the kernel) or with Guevor/testymeh is good too.
Click to expand...
Click to collapse
Thanks @Thing O Doom.
And is the procedure above correct?
Yes, between steps 2 and 3 though you need to make sure to install CWM recovery (I recommend Rouge XM version, as it reads internal and external SD card) this is what you will use to flash the kernel and a ROM
Thing O Doom said:
Yes, between steps 2 and 3 though you need to make sure to install CWM recovery (I recommend Rouge XM version, as it reads internal and external SD card) this is what you will use to flash the kernel and a ROM
Click to expand...
Click to collapse
Thanks Thing O Doom.
Yes, I forgot to mention CWM...
Will try the stock .24 when it comes out (hopefully this weekend) and if RR continues I will go Revolution HD or guevor.
Hi Guys,
I have a TF101 and want to root it and install a good ROM.
What's the latest stable and good ROM please?
Thanks
I like AOSP based roms, and currently am using AOKP.
Megatron and ARHD are also very good, same with Revolver.
one of those 4 with guevor's kernel should set you up right.
If you want to root easily you can use my PERI 1-click tool in my sig.
Can AOSP rom run Skype with webcam?
Because in the stock rom the webcam doesn't work.
It works fine with me, I have AOKP Build 38 with Guevor's aokp 21.11 kernel.
You can use PERI to root and go from there.
Hi,
I have installed Matr1x kernel. I am using Stock ICS Rom only. Will the New Jelly Bean Update.zip work.
Can i install using cwm.
Please advise me.
Regards,
asdf2020
It should flash through CWM, but keep in mind it'll overwrite your recovery and replace your kernel.
chronophase1 said:
It should flash through CWM, but keep in mind it'll overwrite your recovery and replace your kernel.
Click to expand...
Click to collapse
Thanks for reply.
Does it will wipe my data/apps as well?
No. Everything will be the same. I flashed over ICS and everything was kept the same for me
chronophase1 said:
No. Everything will be the same. I flashed over ICS and everything was kept the same for me
Click to expand...
Click to collapse
has your kernel been replaced??? or is it the same ??
For ****s-and-giggles, I threw the matr1x kernel on top of my 4.1.1 ota last night ... It didn't work.
asdf2020 said:
has your kernel been replaced??? or is it the same ??
Click to expand...
Click to collapse
Yea. My app settings stayed the same, but like I said, my kernel got replaced, which is expected. I don't use matrix though and seeing as the kernel sources vary, chances of it working are pretty slim, as seen above.
asdf2020 said:
Hi,
I have installed Matr1x kernel. I am using Stock ICS Rom only. Will the New Jelly Bean Update.zip work.
Can i install using cwm.
Please advise me.
Regards,
asdf2020
Click to expand...
Click to collapse
Your kernel will get replaced. I wouldn't recommend it because I've tried other kernels with the official OTA JB ROM and the experience wasn't as smooth. I have yet to try Matr1x kernel yet though.
No different versión of Ndroid not supported at least yet ;D
Lets just say hes workin on it i would expect
So......official JB 4.1 won't work on my Matr1x kernel
hi guys just yesterday i install thaiz rom and everythink went ok but when i try to istall kernal 0.6 that thaiz suggest for this rom i did everythink as i read from the instructions using the rom manager as i did with the rom and nothink happend. I go in setting and it says that i use kernel :2. 6.35.7+ . Can you help me plz????
When you install ThiaiZO3D ROM, v0.6 kernel is also installed with it by default (but it's not OC)...You have a kernel package on the first page of his thread with different OC modules but currently this isn't working like it should.He will post another modules as soon as he manage to fix them...
You could try installing different kernel if you like.For example Prometheus v1.5.They say that it's working great with ThiaiZ ROM...
Sent from my LG-P920
ubabic said:
You could try installing different kernel if you like.For example Prometheus v1.5.They say that it's working great with ThiaiZ ROM...
Sent from my LG-P920
Click to expand...
Click to collapse
Is not working great...I got freeze, few reboot them self...
Ok, so I'm running cm7.2 and Ive used Trinity and faux123 kernels but when I'm trying to play modern combat 3 the frame rate is choppy and the game lags. This doesn't happen on the stock root or stock kernel. I was wondering if there where any other good kernels that are great for running games with heavy graphics and will run the game smoothly like the stock root kernel or if there is, can someone help me find a stock g2x kernel that has been ported for cm7. Thanks
joker550 said:
Ok, so I'm running cm7.2 and Ive used Trinity and faux123 kernels but when I'm trying to play modern combat 3 the frame rate is choppy and the game lags. This doesn't happen on the stock root or stock kernel. I was wondering if there where any other good kernels that are great for running games with heavy graphics and will run the game smoothly like the stock root kernel or if there is, can someone help me find a stock g2x kernel that has been ported for cm7. Thanks
Click to expand...
Click to collapse
are you undervolting or overclocking?
ive used many a trinity and faux kernel, and solely use faux 54 for my daily driver, and mc3 plays perfect for me.
it has to be a tweak or rouge app causing the issue.
Iconia A100 CM10 PRIVATE BUILD, TabletUI, Updated to 11/03/12 Source; godmachine v2.0 kernel
justjackyl said:
are you undervolting or overclocking?
ive used many a trinity and faux kernel, and solely use faux 54 for my daily driver, and mc3 plays perfect for me.
it has to be a tweak or rouge app causing the issue.
Iconia A100 CM10 PRIVATE BUILD, TabletUI, Updated to 11/03/12 Source; godmac.hine v2.0 kernel
Click to expand...
Click to collapse
Well on the faux123 and Trinity kernels I have to overclock for the game to run smoothly but it overheats and at 1-1.2ghz its lagging and frame rate seems to be low. but on stock root and stock kernel at 1ghz the game runs smoothly and no lag. Immaterial try the newest faux kernel vs54 what rom and kernel are you using so I can check and see if my rom is the issue. Thank you ill post back if the updated kernel doesn't do the trick.
My setup? Look down. Lol
Are there any other tweaks or performance settings you are using?
I'd install the rom in my signature, with no kernel, no tweaks, go right to running mc3 and see what happens.
Make sure you are wiping in CWM :
Factory/Data Reset
Format cache
Format dalvik cache
Format system partition
Than flash ROM and gapps.
Test that first.
G2x-temasek CM7 build135.4 w/faux 054 kernel
justjackyl said:
My setup? Look down. Lol
Are there any other tweaks or performance settings you are using?
I'd install the rom in my signature, with no kernel, no tweaks, go right to running mc3 and see what happens.
Make sure you are wiping in CWM :
Factory/Data Reset
Format cache
Format dalvik cache
Format system partition
Than flash ROM and gapps.
Test that first.
G2x-temasek CM7 build135.4 w/faux 054 kernel
Click to expand...
Click to collapse
Tried it. Still stutter online maybe its the application do u have a link from where u downloaded it from? Or ill just stick to stock until cm10 thanks for your help tho.
joker550 said:
Tried it. Still stutter online maybe its the application do u have a link from where u downloaded it from? Or ill just stick to stock until cm10 thanks for your help tho.
Click to expand...
Click to collapse
a link for what? game, rom, kernel?
Iconia A100 CM10 BUILD TESTER; godmachine v2.0 kernel
justjackyl said:
a link for what? game, rom, kernel?
Iconia A100 CM10 BUILD TESTER; godmachine v2.0 kernel
Click to expand...
Click to collapse
MC3.apk
joker550 said:
MC3.apk
Click to expand...
Click to collapse
I don't pirate.
I download and install via playstore...
G2x-temasek CM7 build135.4 w/faux 054 kernel