Related
Fisrt I Flashed I9001XXKP4 2.3.4, I got my stock ROM Rooted and then Installed manveru0's CWM Recovery and KERNEL as he describes procedure HERE http://forum.xda-developers.com/showthread.php?t=1295284&page=15...Last step i Installed the Great Sakindia's CRANIUM RC2 ROM From manveru0's CWM "INSTALL ZIP FILE OPTION"...After installation finished i applied
adrenaline shot v12 patch.
I've got to say i got some really strange results from CF-Bench
goku86 said:
Fisrt I Flashed I9001XXKP4 2.3.4, I got my stock ROM Rooted and then Installed manveru0's CWM Recovery and KERNEL as he describes procedure HERE http://forum.xda-developers.com/showthread.php?t=1295284&page=15...Last step i Installed the Great Sakindia's CRANIUM RC2 ROM From manveru0's CWM "INSTALL ZIP FILE OPTION"...After installation finished i applied
adrenaline shot v12 patch.
I've got to say i got some really strange results from CF-Bench
Click to expand...
Click to collapse
I have not installed Cranium Rom and my ratings are normal for an almost stock kernel. Forget about the Adrenaline shot since my kernel doesn't support init.d yet. So maybe Sakindia can explain why your ratings are like that?
By strange result you mean a ****ty result?
I run a 5346,2056,3372 on a 2.3.5 I9001 BUKP1, GINGERBREAD.BUKP2, and I am not realy happy with it.
kugyman said:
By strange result you mean a ****ty result?
I run a 5346,2056,3372 on a 2.3.5 I9001 BUKP1, GINGERBREAD.BUKP2, and I am not realy happy with it.
Click to expand...
Click to collapse
I have run the cf-bench once again on a stock rom 2.3.4 with stock kernel. the results are: 6125, 2523, 3963.
They are slightly better than with my kernel. So at least I know that my kernel ain't that bad. Maybe the results would be better if the default governor is set to performance. But again, that ain't a good idea for a mobile device I guess.
I run again CF-Bench and i got same results, but for the third time i got 6400 2500 4200 approximately...some glitch of CF-Bench.
But as usual i like experimenting randomly than spending time and effort, like our expert friends here like manveru0, sakindia and others.
My friend manveru0 you re doing great, you work for CWM is essential for getting a step further so to get a good custom rom.
I hope you'll continue..
I want to Overclock my galaxy fit.....
Without any changes to the interface & CyanogenMod's
i like Stock with an OC Kernel if it's possible..........thn how to do plz help me out
what rom do you currently have?
Stock Rom WKQ2 2.3.4
you could try installing
http://forum.xda-developers.com/showthread.php?t=1427833
but the Wi-Fi may have problems.
i have DDKQ5 gingerbread indian version and i have rooted it....can i overclock it with the link you have given??
Delanoister said:
It's for KPQ firmware
Cause It ain't include wifi module.
So. if u test on other ROM, wifi get problem
Click to expand...
Click to collapse
It might have WiFi problems....
lomash said:
It might have WiFi problems....
Click to expand...
Click to collapse
can sum1 fix the wifi problem in this kernel..or maybe release it for the DDKQ5 version..i installed it on DDKQ5 everything is working fine except for wifi..
Use KPQ stockrom
Then use delanoister kernel for KPQ... that's support for overclocking
ankitmathur said:
i have DDKQ5 gingerbread indian version and i have rooted it....can i overclock it with the link you have given??
Click to expand...
Click to collapse
Guys... to overclock your device... you must to root and using kernel that support to overclocking...
Sent from my GT-S5670 using xda premium
Help in overclocking
what is overclocking ,, and how to do on fit
AhmedGharieb said:
what is overclocking ,, and how to do on fit
Click to expand...
Click to collapse
overclock is a way to increase your cpu speed.fit have 600mhz preset but with custom roms u can get upto 800mhz.it will increase the performance of ur phone.
go to development section and install a rom like razodroid and install then the oc kernel in it.
Sent from my GT-S5670 using XDA App
how can i use overclock? i am using creed's rom 1.7.2 and flashed the OC kernel + memory hack. i cant use them both.
hey man
you must install no-frills from the market if you dont have.
then you can select governer and scheduler.
ondemand and deadline for example
or lagfree /deadline
powersave/ "
if you installed memory hack, it can be that you cant download apps from the market....but there are goods apps app2sd or S2E
i have them on the razodroid V1 and it runs wonderfull
Hi guys, me again. So i bring you my SuperStock kernel. The purpose of these kernel's is to provide stock stability with some tweaks from custom kernel's to improve the experience. Made from the LG kernel's with a ram disk modified by me for performance & feature purposes. So let's get down to business then
Features
-Completely Stock LG Built Kernel From Original P920 21E, 20F, & SU760 20F
-Stock Features
-*Standard Clocked @ 1.2Ghz Upto 1.4Ghz (Only If You Have Modules)
-Overided Automated Voltage Control
-Standard LG Frequencies
-Standard LG Voltages
-Ram Management Tweaks
-Modules Loaded At Boot
-Init Tweaks
-Init.d Support
-Full Ext4 Mount Compatibility
-Screen Off Frequency Set To 300Mhz
Installing The Kernel
-Make Sure Your Rooted
-Make Sure You Have CWM
-Copy The Zip To Your SD
-Select Install Zip From Internal/External SD (Wherever You Put It)
-Select The Kernel File
-Simple As That, You should Be Good To Go, Just Restart & Enjoy.
Things YOU Need To Be Aware Of
NOTE: *For The Use Of Overclocking Frequencies You Must Have The Modules In Your Rom. These Are NOT Provided In Bone Stock Rom's. Use The Search Button Or If Your Using A Custom Rom, Then Congratulations You Most Probably Already Got Them. Mine, Thiaiz, Meemo & Accura's Just To Name A Few, Latest Roms Contain These Modules So You Should Be Fine.
You MUST Be Using The Equvalent Or Compatible Baseband For You To Get Signal. If You Dont Have Signal Its NOT The Kernel's Fault. Either 21E(Recommended), 20F, 20P, Maybe 20C & 20G Are Required.
Kernel Source(Ram Disk Only)
@ My Git Complying With GPL & XDA Rules: https://github.com/samno1607
Enjoy!
Changelog
Changelog 03/07/2012
-SU760 Version Added
Changelog 27/06/2012
-Initial Release See OP For Details
Extra's & Stuff
Extra's
Stuff
Love this kernel!
Ok forgive the noob but will either of these work for me or do (I think I do) I need to flash my baseband?
GetRIL tells me my baseband is V20c
If I do need to can someone please link me to the best option for flashing a baseband (V21e?) that will allow me network access in Australia. I really want to try out these kernels and roms!
Sent from my LG-P920 using XDA
Thanks Samno, just what the Doctor ordered.
saint_cow said:
Ok forgive the noob but will either of these work for me or do (I think I do) I need to flash my baseband?
GetRIL tells me my baseband is V20c
If I do need to can someone please link me to the best option for flashing a baseband (V21e?) that will allow me network access in Australia. I really want to try out these kernels and roms!
Sent from my LG-P920 using XDA
Click to expand...
Click to collapse
Should work with 20c but you'd be better of moving to a newer baseband to get rid of GC issues. Will be testing it out later today with 20a before moving to 20g. I'd say go for 20f as that is what Samno has been developing with. You can get it here:
http://forum.xda-developers.com/showthread.php?t=1540163
If you want to go for 20g you'll have to follow a different procedure. There's a video guide in this thread:
http://forum.xda-developers.com/showthread.php?t=1629529&highlight=20g+baseband+flash
If you get issues with 20g check, look here:
http://forum.xda-developers.com/showthread.php?t=1609437&highlight=kdz+offline+fix&page=9
For 21e check out: http://forum.xda-developers.com/showthread.php?t=1635011
samno said:
Hi guys its almost 2 45 in the morning here got to be up for work soon so i'll keep this short & sweet for now.
Features
-Completely Stock LG Built Kernel
-Stock Features
-Standard Clocked @ 1.2Ghz Upto 1.4Ghz
-Overided Automated Voltage Control
-Standard LG Frequencies
-Standard LG Voltages
-Ram Management Tweaks
-Modules Loaded At Boot
-Init Tweaks
-Init.d Support
-Full Ext4 Mount Compatibility
-Screen Off Frequency Set To 300Mhz
For Overclocking Frequencies You Must Have The Modules In Your Rom.
Mine, thiaiz, meemo & accura's latest roms contain these modules so you should be fine.
Flash Through CWM Your Appropriate Version, Reboot, Done!
Enjoy and i'll update this post later.
Click to expand...
Click to collapse
hi samno,
just tried v20f on my phone, i'm on stock v20c, and the kernel seems to be clocked at 1GHz by default. i'm on stock so no initd for me
thanks
More from the noob, and thanks!
Guantonio said:
Thanks Samno, just what the Doctor ordered.
Should work with 20c but you'd be better of moving to a newer baseband to get rid of GC issues. Will be testing it out later today with 20a before moving to 20g. I'd say go for 20f as that is what Samno has been developing with. You can get it here:
http://forum.xda-developers.com/showthread.php?t=1540163
If you want to go for 20g you'll have to follow a different procedure. There's a video guide in this thread:
http://forum.xda-developers.com/showthread.php?t=1629529&highlight=20g+baseband+flash
If you get issues with 20g check, look here:
http://forum.xda-developers.com/showthread.php?t=1609437&highlight=kdz+offline+fix&page=9
For 21e check out: http://forum.xda-developers.com/showthread.php?t=1635011
Click to expand...
Click to collapse
Thanks mate, I have a couple of more questions;
Are APN's built into the ROM's themselves?
If I use this kernel on V20c should the other ROMS suggested in the first post work for me?
I had a go at flashing ThiaiZO3D V2.7.1 on V20c baseband and whilst it worked great I couldn't get any network (I used getril but to no avail).
So much to learn!
Update for those interested, I have flashed ThiaiZO3D V2.7.1 ROM (no network for me usually on this ROM I assume because of V20c baseband?) and then flashed this kernel and all is good so far!
Hi,
I am using your Promethius 1.4+ ROM with Promethius Kernel V1.4.5.1+
Will the SuperStock+ V21E.zip be better than that?
Also one request. will it be possible to use INTERNET PASS THROUGH in O3D ( by using a flashable zip or Add on apk?)
will you be able to help with the internet pass through feature?
desperately need that.
thanks
schubeir
Do Stock rom v21e work with this kernel?
Sent from my LG-P920 using Tapatalk 2
Hi Samno,
flashed this kernel (v21E) on Promethius Rom v1.4 + BB v21E. Everything perfect so far:
-Wifi ok.
-BT ok.
-Music: no stuttering at all (PowerAMP).
-oc: up to 1.35GHz perfectly stable.
Big thanks!
samno said:
Hi guys its almost 2 45 in the morning here got to be up for work soon so i'll keep this short & sweet for now.
Features
-Completely Stock LG Built Kernel
-Stock Features
-Standard Clocked @ 1.2Ghz Upto 1.4Ghz
-Overided Automated Voltage Control
-Standard LG Frequencies
-Standard LG Voltages
-Ram Management Tweaks
-Modules Loaded At Boot
-Init Tweaks
-Init.d Support
-Full Ext4 Mount Compatibility
-Screen Off Frequency Set To 300Mhz
For Overclocking Frequencies You Must Have The Modules In Your Rom.
Mine, thiaiz, meemo & accura's latest roms contain these modules so you should be fine.
Flash Through CWM Your Appropriate Version, Reboot, Done!
Enjoy and i'll update this post later.
Click to expand...
Click to collapse
I don't find Gulliver's travel & Polaris office after i flash your kernel,except it everything's there but without these two superb app your kernel is still not complete stock kernel.:crying:
Having some odd battery behaviour on this kernel with Thaiz V2.7.1 ROM. Seems to stay at the same percentage for a while then has a huge drop.
Have rebooted a few times and fully charged and now the drain is rather fast. Anyone else having these issues?
Sent from my LG-P920 using XDA
So far so good phone performance wise, Running Promethius 1.4 BB 21E.
Can't say if I have more of a battery drain with this Kernel compared to Promethius Kernel 1.4, as I am currently doing a bunch of stuff on my phone to check stability. But it does seem like it is draining faster.
Had it overclocked to 1344 without any issues, phone started lagging at 1400 though. I currently have it set back to default speeds as the phone was starting to get hot.
Also wanted to add that my music hasn't skipped since I put this kernel in. Using the Stock Player with Dolby Mobile On. I have it full volume out to my computer line in.
thx for your job! but bluetooth not working for me (rom: prometheus 1.4+ kernel: stock+, prom 1.4.5.1+, and superstock+)
wreedx said:
thx for your job! but bluetooth not working for me (rom: prometheus 1.4+ kernel: stock+, prom 1.4.5.1+, and superstock+)
Click to expand...
Click to collapse
If you installed bluekernel, it's a common issue. You will have to reinstall the rom again
Sent from my LG-P920 using xda premium
yes...thx!
and...if internet is turning off (3g & wifi), and restart phone, after booted, the screen cyclically switched on.
when i turn on the internet, this problem disappears...
I only have it?
2.3.5 STOCK
IAM USING DEFAULT STOCK ROM 2.3.5 v21e and rooted. Will the kernel work on 2.3.5 stock?
oR i should have download other rom?
barkat ali said:
IAM USING DEFAULT STOCK ROM 2.3.5 v21e and rooted. Will the kernel work on 2.3.5 stock?
oR i should have download other rom?
Click to expand...
Click to collapse
it will work
Sent from my LG-P920 using xda app-developers app
I flashed it over stock 21E. But nothing visible changed. CPU is still on 1GHz and can't be overclocked using an app. What went wrong? I erased Dalvik-cache before and after the Kernel flashing (if it makes any difference).
Hi,
I have the rom revolution HD 3.4.2 on my tf101 and I would like to change the kernel. Which is the best for this rom? I tried guevor kernel but it doesn't work.
Thanks.
Any kernal ibwould use stock kernel because with tthqt rom stock works best
Sent from my PG86100 using xda premium
Ok, thanks for your answer.
There should be no reason why guevors kernel didn't work. Raymans kernel is close to stock with the addition of over clocking and more governors if you are worried about radical changes.
Actually, it's just when I flash kernel in CWM (wipe data and dalvik cache), my tablet reboot in the recovery each time and I have to reinstall my rom.
edit: testymeh and harmony kernel work but not guevor.
coco22500 said:
Hi,
I have the rom revolution HD 3.4.2 on my tf101 and I would like to change the kernel. Which is the best for this rom? I tried guevor kernel but it doesn't work.
Thanks.
Click to expand...
Click to collapse
The only other kernel other than the stock one ive used is Guevor v22.6. If that one didnt work as well for you then you should try his v1.1 kernel. Just install it through your custom recovery. Best of luck sir!
I flashed the kernel but when I conect to my PC, my tablet is not detected.
Someone has an idea?
I'm using guevor's kernel v22.6 with ARHD 3.4.2 and it's working fine.
No SOD no RR. Team Rogue touch recovery.
Thanks, works great
I have search in this forum and googling it about my problem [ not big problem actually ], but not yet found proper thread or answer.
After flashing ROM version V5.2 and try to boot from recovery, i got my button key now blinking while booting.
But after booting complete is normal.
Currently use V5.2 with baseband 18A, and it works normal in my O3D device.
Button is also working normal, except search and back button is mixed function.
Do you guys ever has similar blinking led? is it absolutelly normal,
or just i have not yet found some issues in my device...
thank you for any feedback ( if there is any link for fixing search/back button improvement, it'll be better )..
mine is blinking too while booting, think it is normal.
if you want normal buttons, you should install a kernel with 4 button support. then back and search isn't switched.
blinking = normal
4 keys fix: flash this Kernel but read the Instructions carefully!!
ps you dont have to use exactly that kernel but its the one i use/like
Sent from my LG-SU760 using xda premium
thanks to both of you guys...
if blinking is normal then i'll not mind about it..
and for link about kernel, i'll go and start to read it..
thanks for link..
TMProduct1onZ said:
blinking = normal
4 keys fix: flash this Kernel but read the Instructions carefully!!
ps you dont have to use exactly that kernel but its the one i use/like
Sent from my LG-SU760 using xda premium
Click to expand...
Click to collapse
Sorry to bump up on little bit dumb question i am about to ask but, Whats the Kernel do to your phone? what is it? why i need it?
maybe need for unlock (flash) the bootloader...
bensmokie said:
Sorry to bump up on little bit dumb question i am about to ask but, Whats the Kernel do to your phone? what is it? why i need it?
Click to expand...
Click to collapse
“… the kernel is the main component of most computer operating systems; it is a bridge between applications and the actual data processing done at the hardware level.”
Read more about it Here
Sent from my P920 using XBSA ICS V5
TMProduct1onZ said:
“… the kernel is the main component of most computer operating systems; it is a bridge between applications and the actual data processing done at the hardware level.”
Read more about it Here
Sent from my P920 using XBSA ICS V5
Click to expand...
Click to collapse
Thanks a lot mate.as i as i understood i can flash only the kernel right? or it does have to be with the ICS. i mean like the ICS V5 of Xbsall has kernel 3.0.1 on it, isn't it? but i think it doesn't the over clock ....
bensmokie said:
Thanks a lot mate.as i as i understood i can flash only the kernel right? or it does have to be with the ICS. i mean like the ICS V5 of Xbsall has kernel 3.0.1 on it, isn't it? but i think it doesn't the over clock ....
Click to expand...
Click to collapse
You are already on ICS, so you can flash only the kernel.
schubeir
schubeir said:
You are already on ICS, so you can flash only the kernel.
schubeir
Click to expand...
Click to collapse
Thanks , Can you please advise me for a great kernel....
bensmokie said:
Thanks , Can you please advise me for a great kernel....
Click to expand...
Click to collapse
My favorite: Kernel
or this one: Kernel
Sent from my P920 using XBSA ICS V5
TMProduct1onZ said:
My favorite: Kernel
or this one: Kernel
Sent from my P920 using XBSA ICS V5
Click to expand...
Click to collapse
It says here that i have to flash wkparks Modified Bootloaders From Here > http://forum.xda-developers.com/show....php?t=1971014
Flashed Dexter_nlb's Recovery, Either TWRP Or CWM (I Use CWM) From Here > http://forum.xda-developers.com/show....php?t=1978543
as far as understand we already those done steps in order to get rooted , because without them my Ics will not rooted correct me if i am wrong but in order to get your device rooted you have to flash them both ain't that right? i mean you have flash Dexter_nlb's Recovery and wkparks Modified Bootloaders to root your ics right?
bensmokie said:
It says here that i have to flash wkparks Modified Bootloaders From Here > http://forum.xda-developers.com/show....php?t=1971014
Flashed Dexter_nlb's Recovery, Either TWRP Or CWM (I Use CWM) From Here > http://forum.xda-developers.com/show....php?t=1978543
as far as understand we already those done steps in order to get rooted , because without them my Ics will not rooted correct me if i am wrong but in order to get your device rooted you have to flash them both ain't that right? i mean you have flash Dexter_nlb's Recovery and wkparks Modified Bootloaders to root your ics right?
Click to expand...
Click to collapse
i didnt flash dexters recovery to root my phone :/
however, if you flashed dexters recovery then you have everything you need and you can flash a custom kernel
Sent from my P920 using XBSA ICS V5
TMProduct1onZ said:
i didnt flash dexters recovery to root my phone :/
however, if you flashed dexters recovery then you have everything you need and you can flash a custom kernel
Sent from my P920 using XBSA ICS V5
Click to expand...
Click to collapse
Well i flashed it but nothing change my Kernel still the same 3.0.21 as it was.maybe i didn't wipe cashe or something.
I flashed Dexters recovery in order to get TWRP work on my phone.
bensmokie said:
Well i flashed it but nothing change my Kernel still the same 3.0.21 as it was.maybe i didn't wipe cashe or something.
I flashed Dexters recovery in order to get TWRP work on my phone.
Click to expand...
Click to collapse
If the flash process had no errors then you successfully flashed a custom kernel all custom kernels for ics are 3.0.21 but with some tweaks and mods
Sometimes devs change kernel version to say something else, but not always...
Download No-Frills CPU to see what your min/max frequencies are
Sent from my P920 using XBSA ICS V5
TMProduct1onZ said:
If the flash process had no errors then you successfully flashed a custom kernel all custom kernels for ics are 3.0.21 but with some tweaks and mods
Sometimes devs change kernel version to say something else, but not always...
Download No-Frills CPU to see what your min/max frequencies are
Sent from my P920 using XBSA ICS V5
Click to expand...
Click to collapse
Here is mine,
mine gives me possibility to 1.3GHz on Max and Min clock Freq, will it harm my device if i move to 1.3GHz all of it? because i changed it to 1.3 GHz to both of them at Max and min...
bensmokie said:
Here is mine,
mine gives me possibility to 1.3GHz on Max and Min clock Freq, will it harm my device if i move to 1.3GHz all of it? because i changed it to 1.3 GHz to both of them at Max and min...
Click to expand...
Click to collapse
i guess you flashed iodaks kernel..
No it wont really harm your phone but it will drain more battery.
And its not really smart to keep the min @1,3ghz.. make it min 300mhz and max 1,3ghz iodak made his kernel so, that it raise to max freq. every time you touch the display, so theres no need to make min freq 1,3ghz.
Edit: oh and choose for governor Hotplug and for i/o sheduler sio (best combination if you ask me..)
Sent from my P920 using XBSA ICS V5
Thanks a lot mate you been help full I can feel my phone really speeding up now.
Once again thank u
Sent from my LG-SU760 using xda app-developers app
bensmokie said:
Thanks a lot mate you been help full I can feel my phone really speeding up now.
Once again thank u
Sent from my LG-SU760 using xda app-developers app
Click to expand...
Click to collapse
Glad i could help :good:
have fun!
Sent from my P920 using XBSA ICS V5
hi bensmokie , TMProduct1onZ..
as in my 1st post, i've xbsall ICS now..
and read many post for fixing 4-keys (changing kernel )..
by yesterday, i found this tools... here
my question is :
1. can i use it directly to flash kernel to fix 4 keys? the kernel is based on iodak's kernel.
2. i've read iodaks kernel zipped format. but it should need to install wkpark bootloader
3. i can boot into recovery mode, could i install iodak zipped kernel directly from recovery mode, without doing #2 step?
thanks..