I can't seem to download Faux kernal nor Dragon, there files are missing? Is there any other kernels best stable with Weapon ROM?
Isn't Weapon a modified Stock ROM (2.3.3)?? You're only gonna be able to use Kernels for the stock ROMS. Faux is the only one I know of that has a kernel series for the Stock ROMS. Check out the link : http://forum.xda-developers.com/showthread.php?t=1102720
New2my8125 said:
Isn't Weapon a modified Stock ROM (2.3.3)?? You're only gonna be able to use Kernels for the stock ROMS. Faux is the only one I know of that has a kernel series for the Stock ROMS. Check out the link : http://forum.xda-developers.com/showthread.php?t=1102720
Click to expand...
Click to collapse
Well I read other people's combination and they had Weapon with Faux kernel but the dl link for Faux doesn't work. (Gingerbread)
I can upload them for you when I get home in 30 min
Sent from G2x running BuROM v0.2 (root; mod stock 2.3.4) w/ faux's GB kernel 014b2-ext4.
justjackyl said:
I can upload them for you when I get home in 30 min
Sent from G2x running BuROM v0.2 (root; mod stock 2.3.4) w/ faux's GB kernel 014b2-ext4.
Click to expand...
Click to collapse
Yes, please! And would you recommend faux kernel or trinity kernel?
Steeez said:
Yes, please! And would you recommend faux kernel or trinity kernel?
Click to expand...
Click to collapse
I've always used faux with stock ROMs.
I may be wrong, but I thought Trinity was for CM7 ROMs. I used it with the CM7 Nightly Build 135.1, worked great. But as for stock, I've always used the 2 faux kernels I've uploaded.
This is the latest faux GB kernel:
P999-GB-Kernel-014b2-ext4.zip
Linky: http://www.freefilehosting.net/p999-gb-kernel-014b2-ext4
If you have any issues, which I haven't had any thus far and been on my current setup for almost two weeks, you can try this older version:
P999-GB-Kernel-013_r2-ext4.zip
Linky: http://www.freefilehosting.net/p999-gb-kernel-013r2-ext4
I don't know your experience level with this stuff. You don't have to re-install the ROM when changing kernels. Just make sure you wipe/format "cache" and "dalvik cache". Let it boot up and don't do anything for ten minutes. Than reboot again and your good to go. This is how I have done it and I've rarely encountered any issues.
Let me know if this helps and I'll be around doing homework for my IT class, so feel free to post back or PM me directly.
Thanks! I'm going to try it right now. Have you used any other stock ROMs? If you did, which one would you prefer?
Steeez said:
Thanks! I'm going to try it right now. Have you used any other stock ROMs? If you did, which one would you prefer?
Click to expand...
Click to collapse
I've used dang near every single ROM available for our G2x.
Stock? It's a coin toss between BuROM and kwes's Rooted Stock. Personally I use BuROM as it is based off of kwes's ROM but a coulpe tweaks. The 2 I can remember off hand is the VM Heap Size is increased to 64MB and the SD read ahead size increased from 128KB to 2048KB. I think BuROM is just a hair faster than kwes's ROM.
BuROM: http://forum.xda-developers.com/showthread.php?t=1661610
kwes's Rooted Stock: http://forum.xda-developers.com/showthread.php?t=1602798
Both are 2.3.4.
I did use weapon, and I liked it. Can't remember why, but I switched back to 2.3.4 because there was something missing from Weapon's 2.3.3
What baseband are you on?
justjackyl said:
I've used dang near every single ROM available for our G2x.
Stock? It's a coin toss between BuROM and kwes's Rooted Stock. Personally I use BuROM as it is based off of kwes's ROM but a coulpe tweaks. The 2 I can remember off hand is the VM Heap Size is increased to 64MB and the SD read ahead size increased from 128KB to 2048KB. I think BuROM is just a hair faster than kwes's ROM.
BuROM: http://forum.xda-developers.com/showthread.php?t=1661610
kwes's Rooted Stock: http://forum.xda-developers.com/showthread.php?t=1602798
Both are 2.3.4.
I did use weapon, and I liked it. Can't remember why, but I switched back to 2.3.4 because there was something missing from Weapon's 2.3.3
What baseband are you on?
Click to expand...
Click to collapse
It's a long baseband lol My wifi isn't working.. :/
Steeez said:
It's a long baseband lol My wifi isn't working.. :/
Click to expand...
Click to collapse
Does it say March 2011 in it? We need to make sure you have the right baseband for the ROM your using or if we need to apply the new_baseband.zip patch to it.
Wifi not working? Hmmm...try GETRil from the playstore. But you need to make sure the baseband issue is correct first.
GETRil: https://play.google.com/store/apps/details?id=com.sibbor.getril&hl=en
justjackyl said:
Does it say March 2011 in it? We need to make sure you have the right baseband for the ROM your using or if we need to apply the new_baseband.zip patch to it.
Wifi not working? Hmmm...try GETRil from the playstore. But you need to make sure the baseband issue is correct first.
GETRil: https://play.google.com/store/apps/details?id=com.sibbor.getril&hl=en
Click to expand...
Click to collapse
Well I restore my system so i'm good now, I'm trying faux older version. So do you want me to tell you my whole baseband?
I tried the older version and everything works for.
If you have no clicks in your call audio when not using wifi calling, your good.
So what rom n kernel did you go with? My setup is in my signature.
Sent from G2x running BuROM v0.2 (root; mod stock 2.3.4) w/ faux's GB kernel 014b2-ext4.
Related
I see all these kernels for CM7 and EB and TW ROMs but none for stock ROM. I'm sticking on stock ROM for a while mainly due to the LG camera app which I love and my GPS is fully functional which I use frequently. I'd love to have an OC kernel or just a kernel in general to flash on the stock ROM. Does one exist that I didn't see in the dev section? Thanks!
you should try eaglesblood 1.0.4 froyo because that is pretty much like stock with some optimization. You can flash EB 1.0.4Froyo directly over stock without wipe, then apply the Trinity kernel. That works for sure because I tried it (what I did was stock --> eb 1.0.2 --> eb 1.0.4 froyo --> kernel, all without wiping)
you could also try the Trinity kernel for EB 1.0.4Froyo on your stock rom. (should work; I didn't try so make sure you have a backUP)
pettigrew95 said:
I see all these kernels for CM7 and EB and TW ROMs but none for stock ROM. I'm sticking on stock ROM for a while mainly due to the LG camera app which I love and my GPS is fully functional which I use frequently. I'd love to have an OC kernel or just a kernel in general to flash on the stock ROM. Does one exist that I didn't see in the dev section? Thanks!
Click to expand...
Click to collapse
Any kernel that works for EB Froyo should work on stock froyo, and any kernel that works for EB Gingerbread should work for the leaked gingerbread. EB is just modified stock.
The main thing you don't want to do is use a kernel build for CM7 on some other rom or the other way around. CM kernel are completely unique and aren't compatible with anything else.
I've used the Trinity kernel for EB froyo with the stock rom and it was very smooth. The only bug I found was that it broke USB mounting.
Thanks for the reply guys, will give EB 1.04 FroYo a shot later on!!
pettigrew95 said:
I see all these kernels for CM7 and EB and TW ROMs but none for stock ROM. I'm sticking on stock ROM for a while mainly due to the LG camera app which I love and my GPS is fully functional which I use frequently. I'd love to have an OC kernel or just a kernel in general to flash on the stock ROM. Does one exist that I didn't see in the dev section? Thanks!
Click to expand...
Click to collapse
I'm running Froyo EB 1.04 with Trinity kernel and is good.
Sent from my LG-P999 using XDA App
pettigrew95 said:
I'm sticking on stock ROM for a while mainly due to the LG camera app which I love and my GPS is fully functional which I use frequently.
Click to expand...
Click to collapse
Same reason why i wanted to stay stock when I was running CM7 I read some of the other threads and I'm now running EB froyo with the trinity kernel and I havent thought about going back.
You get to use the stock HD camera and record in HD which matters as well I have gotten better benchmarks averaging around 3200.
whats the best combo for rom and kernal for the g2x.
im about to install the eagleblood 2.3.3bg (since it has the stock camera) and was looking for a kernal so i could oc it. thanks for the help
also whats best 2.3.3 or 2.3.4 or 2.3.5????
For the most part, rom choice is going to come down to personal preference. As for kernels, faux's is pretty popular. Personally, I'm running eagleblood 2.3.3 and stock kernel.
Sent from my LG-P999 using XDA Premium App
I am running Triggers 2.3.5 with Fauxs 0.3.5-sv OC to 1.4Ghz and it is awesome. No reboots or issues at all.
There is no kernel made for the ota (2.3.3) roms only 2.2.2 froyo, 2.3.5 cm, eb2.3.5 so basically any rom that is based off the new 2.3.3 ota will not have a oc kernel for it yet LG didn't release source, and best rom kernel combo is definitely cm, and fauxs latest or morfics it a toss up, but honestly the newest nightly runs so nice u wont need one and it has voodoo built in and boot up time is super quick, idk IMO oc kernels are not needed with this phone it is already sick quick I get 3100 quadrant with cm stock kernel, now if u want to save battery life grab a UV kernel
blondie or brunette?? LOL its all up to ur taste for roms and kernels! Im having a great time using the rom and kernel on my sig! But all depends on you and your phone... (some phones dont like oc/uv), the only way to know is to flash, flash flash and flash (watch out not to become a flashaholic...)
Any rooted 2.3.3 ROM, with the Stock Kernel, and LG Camera App.
Sent from my LG-P999 using XDA App
I am running Eaglesblood v2.5 rom. I was wondering what is the best kernel to run with it. Ive heard that Faux kernels are good. If so where can i go to download them?
Chinese281 said:
I am running Eaglesblood v2.5 rom. I was wondering what is the best kernel to run with it. Ive heard that Faux kernels are good. If so where can i go to download them?
Click to expand...
Click to collapse
Under G2x Android Development.
http://forum.xda-developers.com/forumdisplay.php?f=1114
my android version is 2.3.3 GingerBread
kernel version: 2.6.35.10-perf [email protected]#1
my phone was running on 2.2 froyo when i bought it. later then i updated it to 2.3.3 (official firmware update by lg)
i want to to flash a new kernel and rom for maximum performance. i want to play HD games without much lags. so which combination of custom rom and kernel i should use?
andy's Phoenix ROM ( Gingerbread-2.3.4 , released on 2011-10-20) with
franco.Kernel for Gingerbread ( 2.6.35.14) works with mine?
or there is any better combination?
First of all, you will need old baseband or else data and GSM will not work.
Read this thread. http://forum.xda-developers.com/showthread.php?t=1149530
That combination is the best in my opinion, but you should wait for the new phoenix as the current one has a lot of bugs.
okay. so i have new baseband now. will the above mentioned combination works after i downgrade to 2.2?
debug7 said:
okay. so i have new baseband now. will the above mentioned combination works after i downgrade to 2.2?
Click to expand...
Click to collapse
Yes. And flash old baseband carefully. Very carefully
i have seen some custom roms nd kernels available in xda
http://forum.xda-developers.com/showthread.php?t=901247 (on this link)
my question is that, i found some roms listed under 2.3.3
will those roms works with mine without downgrading my android version to 2.2?
aga rom and paolo v6 kernel
debug7 said:
i have seen some custom roms nd kernels available in xda
http://forum.xda-developers.com/showthread.php?t=901247 (on this link)
my question is that, i found some roms listed under 2.3.3
will those roms works with mine without downgrading my android version to 2.2?
Click to expand...
Click to collapse
You don't have to downgrade android, you just have to flash old baseband (also known as radio) see the link I provided in my first post.
Secondly, yes some ROM's are based off the official 2.3.3 and need the new baseband. In that case you don't need to flash old baseband.
when it comes to kernel i saw franco.Kernel under both .32 and .35 kernels. actually i don't know what this .32 and .35 means which franco kernel i should use??
Go for cm7.2 by adfad666 and do flash gbsv20 kernel over it for best perfomance... but you need old baseband for that, be careful while flashing the old baseband as mentioned above, else your phone might be dead if u'll not follow all instuctions.
HIT THANKS if I helped you
debug7 said:
when it comes to kernel i saw franco.Kernel under both .32 and .35 kernels. actually i don't know what this .32 and .35 means which franco kernel i should use??
Click to expand...
Click to collapse
For Phoenix, Franco .35
Thanks negi one more doubt
as i told you i am running 2.3.3 android version which is new baseband,
am i able to flash andy's phoenix rom which is listed under 2.3.4 not under 2.3.3?? without any further modification on current status of my phone i mean changing to old baseband..etc
debug7 said:
Thanks negi one more doubt
as i told you i am running 2.3.3 android version which is new baseband,
am i able to flash andy's phoenix rom which is listed under 2.3.4 not under 2.3.3?? without any further modification on current status of my phone i mean changing to old baseband..etc
Click to expand...
Click to collapse
You will need to change baseband to the old one as Phoenix is not based on LG's official gingerbread.
so the phoenix 2.3.4 is not based on lg's v20 baseband (i mean the new baseband)? i saw openOptimus under 2.3.3 ROMs. can i install this ROM without changing the current new baseband?
debug7 said:
so the phoenix 2.3.4 is not based on lg's v20 baseband (i mean the new baseband)? i saw openOptimus under 2.3.3 ROMs. can i install this ROM without changing the current new baseband?
Click to expand...
Click to collapse
Yup. It will work without changing to the old baseband.
thanks a lot. finally i decided to go with openoptimus ROM and franco.Kernel .35
i have heard lg optimus one has touch screen bug problem. will it fix with this upgrade?
also i want to play HD games without much lags. is it possible by using this combination of ROM and Kernel and overclocking the cpu?
debug7 said:
thanks a lot. finally i decided to go with openoptimus ROM and franco.Kernel .35
i have heard lg optimus one has touch screen bug problem. will it fix with this upgrade?
also i want to play HD games without much lags. is it possible by using this combination of ROM and Kernel and overclocking the cpu?
Click to expand...
Click to collapse
Well, there are workarounds. First of all it's impossible to completely fix the touchscreen bug. Franco is trying to reduce it to some extend. Yes, you can play HD games without lags with the latest kernel from Franco but it gives choppy UI.
So I suggest to use the older Franco kernel for now which gives smooth UI, but HD games will lag a little.
Overall, your phone will be much smoother and have much better performance than stock.
Thank you very much negi for your help.
debug7 said:
Thank you very much negi for your help.
Click to expand...
Click to collapse
Always welcomed
Hey, as I recommended, as of now use the old Franco kernel.
Here: http://www.multiupload.com/2HD02KTOSX
It will lag a little when gaming but will have smooth UI.
I installed IcySnap V1.5 on my LG P500 which comes with kernel 2.6.35.10-perf + CM9 and overclocked to 729mhz. I really liked the rom, but I was wondering if there is another rom + kernel better that focus on performance and little bit of visual.I'm experiencing lag in some games like Zenonia 5
And if i keep this rom, there is a better kernel to improve the performance ?
*sorry for possible gramm mistakes, english is not my mother language*
debug7 said:
my android version is 2.3.3 GingerBread
kernel version: 2.6.35.10-perf [email protected]#1
my phone was running on 2.2 froyo when i bought it. later then i updated it to 2.3.3 (official firmware update by lg)
i want to to flash a new kernel and rom for maximum performance. i want to play HD games without much lags. so which combination of custom rom and kernel i should use?
andy's Phoenix ROM ( Gingerbread-2.3.4 , released on 2011-10-20) with
franco.Kernel for Gingerbread ( 2.6.35.14) works with mine?
or there is any better combination?
Click to expand...
Click to collapse
Try Miui v 1.2 and pp kernel 1.7
Hi everyone,
there are already a few threads but not new.
so i want to learn your decisions about roms and kernels. I am using Eaglesblood 4.0.3 + trinity kernel right now, but i am not happy because it is not really stable. For example i cannot record 1080p !!! I want to use a stable rom and kernel. It has to be android 2.3.x or higher at least. By the way when I install harsh kernel my phone says your sd card and phone memory is damaged. I could not solve that problem.
Thank you
0b095 said:
Hi everyone,
there are already a few threads but not new.
so i want to learn your decisions about roms and kernels. I am using Eaglesblood 4.0.3 + trinity kernel right now, but i am not happy because it is not really stable. For example i cannot record 1080p !!! I want to use a stable rom and kernel. It has to be android 2.3.x or higher at least. By the way when I install harsh kernel my phone says your sd card and phone memory is damaged. I could not solve that problem.
Thank you
Click to expand...
Click to collapse
Stick with CM7 ROMS or Rooted Mod Stock ROMs.
My favorite is BuROM Modded Stock with Faux Kernel 14_b2
OR
CM7 Nightly 135.1 with Faux Kernel 52
CM 7.2 Official with Faux 52
CM 7.2 Nightlies and Faux v52 LG Stock stable
I believe we have a consensus starting,lol notice the trend?
Sent via Iconia A100 on CM10-b090212; godmachine v2.0 kernel; pio's build.prop mod
Temasek cm7 kang and faux stock right now pretty stable
Sent from my LG-P999 using xda premium
Cm7 nightly with trinity elp
Sent from my LG-P999 using Tapatalk
justjackyl said:
I believe we have a consensus starting,lol notice the trend?
Sent via Iconia A100 on CM10-b090212; godmachine v2.0 kernel; pio's build.prop mod
Click to expand...
Click to collapse
lol cm7.2 + faux won the consensus congrats..
I personally have issues with Trinity kernels that I don't have with faux. I say faux based off personal experience.
If you need any of his older kernels that are not available anymore, I have several GB and CM7 kernels of his uploaded . So if you want an older version, pm me for links.
Sent via G2x on CM7 b135.1 w/faux 52 kernel
justjackyl said:
I personally have issues with Trinity kernels that I don't have with faux. I say faux based off personal experience.
If you need any of his older kernels that are not available anymore, I have several GB and CM7 kernels of his uploaded . So if you want an older version, pm me for links.
Sent via G2x on CM7 b135.1 w/faux 52 kernel
Click to expand...
Click to collapse
http://faux.androidro.ms/archive/
justjackyl said:
I personally have issues with Trinity kernels that I don't have with faux. I say faux based off personal experience.
If you need any of his older kernels that are not available anymore, I have several GB and CM7 kernels of his uploaded . So if you want an older version, pm me for links.
Sent via G2x on CM7 b135.1 w/faux 52 kernel
Click to expand...
Click to collapse
thx i installed cm-7-20120930-NIGHTLY-p999.zip that rom and ''[email protected]#49'' just want to learn is that kernel what we are talking about ? Is it the lastest one ?
52 is newest.
http://faux.androidro.ms/P999-CM-Kernel-052-sv-lg-stable.zip
Sent via G2x on CM7 b135.1 w/faux 52 kernel
What's the difference between "P999-CM-Kernel-052-sv-lg-stable.zip" and "P999-CM-Kernel-052-sv-stable.zip" at http://faux.androidro.ms/?
And any idiots guides to installing rom/kernel? I want to install CM 7, currently using stock unrooted 2.3.4 and 21y.
helloha1 said:
What's the difference between "P999-CM-Kernel-052-sv-lg-stable.zip" and "P999-CM-Kernel-052-sv-stable.zip" at http://faux.androidro.ms/?
And any idiots guides to installing rom/kernel? I want to install CM 7, currently using stock unrooted 2.3.4 and 21y.
Click to expand...
Click to collapse
"lg" means low grade, that one is for phones that can't handle the higher CPU clock speeds.
Sent from my LG-P999 using xda app-developers app
getting back on topic...
another vote for trinity..
either CM 7.2 nightly + trinity elp or HFP 2.3 + trinity elp
Morfic's kernels work much better on my phone (LG-P999DW) + 21y baseband...
21e baseband *never* worked quite right for my phone, even on stock.
noahk423 said:
"lg" means low grade, that one is for phones that can't handle the higher CPU clock speeds.
Sent from my LG-P999 using xda app-developers app
Click to expand...
Click to collapse
aww...don't mess with the newbie! lol
Sent via G2x on CM7 b135.1 w/faux 52 kernel
helloha1 said:
What's the difference between "P999-CM-Kernel-052-sv-lg-stable.zip" and "P999-CM-Kernel-052-sv-stable.zip" at http://faux.androidro.ms/?
And any idiots guides to installing rom/kernel? I want to install CM 7, currently using stock unrooted 2.3.4 and 21y.
Click to expand...
Click to collapse
the LG means stock LG voltages and is unable to control undervolting. the other is for if you plan to undervolt with an app like SetCPU.
Sent via G2x on CM7 b135.1 w/faux 52 kernel
justjackyl said:
aww...don't mess with the newbie! lol
Sent via G2x on CM7 b135.1 w/faux 52 kernel
Click to expand...
Click to collapse
Legit! It really means 'low grade'. Hahaha
Sent from my LG-P999 using xda app-developers app
can someone post a link for BuROM Modded Stock??
m0bstr said:
can someone post a link for BuROM Modded Stock??
Click to expand...
Click to collapse
http://www.igottadroid.com/ModMarket/Listings/buru8981661610.html