I successfully booted by Galaxy S III LTE i9305 today, and was using it without a problem.
When I turned it off an hour ago then turned it back on, I'm getting the splash screen announcing the model of the phone, but there's a tiny red exclamation mark in the very top left, and the thing just does not boot.
Please help me??
bzplayer3 said:
I successfully booted by Galaxy S III LTE i9305 today, and was using it without a problem.
When I turned it off an hour ago then turned it back on, I'm getting the splash screen announcing the model of the phone, but there's a tiny red exclamation mark in the very top left, and the thing just does not boot.
Please help me??
Click to expand...
Click to collapse
Sounds like you don't have a custom recovery installed. Through ROM Manager, flash Clockwork Recovery and you should be good to go.
Are you able to go to recovery?
Ok so galaxy checks if all the sectors are working boot sector recovery sector etc all you have to do is most likely flash a new recovery.
if you can't do that now to access your phone boot into download mode by pressing volume down+home+power(or volume up up lol one goes to recovery and one goes to download mode)
then that's where you can flash a new recovery, Rom, etc through Odin
but to get to your OS just choose to restart the phone when it asks you and it will take you straight to the Android booting screen
if that didn't work you just need to reflash your entire Rom
To reflash your recovery all you have to do is download clockwork recovery for your phone and flash it, it will then boot normally again I had the same problem but I accidentally removed my recovery partition reflashed a new cwm on.mine and it booted like a charm
Sent from my SGH-T999 using xda app-developers app
Related
Please help this newbie out!... I recently rooted my Inspire 4G with attn1's hack kit. That went smooth without issue and I have tried a variety of custom ROMs thanks to this great community, but I have noticed a random issue with booting into ClockworkMod Recovery since... I installed Rom Manager and ClockworkMod Recovery 3.0.0.6 and the problem is that sometimes I can boot into recovery and sometimes not. It only seems to work is the first time I reboot immediately after flashing ClockworkMod, then subsequent reboots the phone just boots normally. (I hold volumn down and press power.) I have also tried installing Amon's Recovery (supersonic 2.3) manually using Fastboot - it seems to install without error but when I try holding the down volume button and hitting power - phone just boots normally. So it seems I am stuck with a ClockworkMod install that does not really work with reliability.... I am lost now trying to figure out why this is happening.
Can someone that has seen similar issues provide some tips/suggestions?
TIA
-Reebo
I had the same problem... quit using version 3.0.0.6 and go back to the earliest version, 2.5.1.3 through All ClockworkMod Recoveries. Worked for me.
reeboblue said:
Please help this newbie out!... I recently rooted my Inspire 4G with attn1's hack kit. That went smooth without issue and I have tried a variety of custom ROMs thanks to this great community, but I have noticed a random issue with booting into ClockworkMod Recovery since... I installed Rom Manager and ClockworkMod Recovery 3.0.0.6 and the problem is that sometimes I can boot into recovery and sometimes not. It only seems to work is the first time I reboot immediately after flashing ClockworkMod, then subsequent reboots the phone just boots normally. (I hold volumn down and press power.) I have also tried installing Amon's Recovery (supersonic 2.3) manually using Fastboot - it seems to install without error but when I try holding the down volume button and hitting power - phone just boots normally. So it seems I am stuck with a ClockworkMod install that does not really work with reliability.... I am lost now trying to figure out why this is happening.
Can someone that has seen similar issues provide some tips/suggestions?
TIA
-Reebo
Click to expand...
Click to collapse
You don't have 'fast boot' enabled in settings/application? If so it will not really shut off completely and when you power it up with VOL- it will not work.
i'm also having issues getting cwm to work outside the black screen. i have tried sense/ no sense roms and none have been able to bring up cwm outside the blank screen. i am also running 3.0.0.6 or whatever it is but that has not helped my issue
nyamoV2 said:
i'm also having issues getting cwm to work outside the black screen. i have tried sense/ no sense roms and none have been able to bring up cwm outside the blank screen. i am also running 3.0.0.6 or whatever it is but that has not helped my issue
Click to expand...
Click to collapse
did you use the Simple Root method to root your phone?
can you confirm if you have s-off and root?
Read post #2400 in the thread http://forum.xda-developers.com/showthread.php?t=961406&page=240
reeboblue said:
Please help this newbie out!... I recently rooted my Inspire 4G with attn1's hack kit. That went smooth without issue and I have tried a variety of custom ROMs thanks to this great community, but I have noticed a random issue with booting into ClockworkMod Recovery since... I installed Rom Manager and ClockworkMod Recovery 3.0.0.6 and the problem is that sometimes I can boot into recovery and sometimes not. It only seems to work is the first time I reboot immediately after flashing ClockworkMod, then subsequent reboots the phone just boots normally. (I hold volumn down and press power.) I have also tried installing Amon's Recovery (supersonic 2.3) manually using Fastboot - it seems to install without error but when I try holding the down volume button and hitting power - phone just boots normally. So it seems I am stuck with a ClockworkMod install that does not really work with reliability.... I am lost now trying to figure out why this is happening.
Can someone that has seen similar issues provide some tips/suggestions?
TIA
-Reebo
Click to expand...
Click to collapse
Sounds like fastboot is enabled. If you turn it off you will be able to boot into recovery.
i used the simple one click. yes i have root and s-off. but i'm stuck now. can not see cwm by manually booting into hboot. or through the app and clicking boot into recovery
[Q] Clockworkmod recovery not booting up
I have my phone rooted and ready to flash a custom ROM. I want to install android revolution 4g 4.0. I read that I need to ahve CWM version 3.0.0.6 to flash a 2.3 ROM. Anyways, when i select reboot into recovery in ROM Manager, my phone reboots and shows the HTC logo but then it fades to black screen and does nothing. If i press the power button, the phone reboots normally into the OS. Does anyone know how to fix this so i can install a custom ROM?
I have this exact same issue. Although i can load roms from choosing "Install from sd card" i cannot just boot into recovery and install it from there.
I just recently bought my inspire 4g a week ago.
Mine is 2 days old. Now i cant get it to boot up because it keeps trying to boot into CWM recovery but it cant. Its and endless loop.
Mine wont even load recovery. It reboots the phone but then just fades to a black screen. I cant get back into the OS
flrdast2 said:
Mine wont even load recovery. It reboots the phone but then just fades to a black screen. I cant get back into the OS
Click to expand...
Click to collapse
just press power button and it will reboot your phone.
still stuck doing that too. can get the phone to reboot. but stuck at htc screen or black cwm screen. also checked sd card and is corrupted. i was thinking if i could just flash a new rom over to fix boot issue. but i need some screens to blindly walk through to flash. cwm is 3.0.0.5 if that matters. thanks. on a side note. i think i have a new cm7rc2 build on a formated sd card to try and minimize the guess work on what to click
nyamoV2 said:
still stuck doing that too. can get the phone to reboot. but stuck at htc screen or black cwm screen. also checked sd card and is corrupted. i was thinking if i could just flash a new rom over to fix boot issue. but i need some screens to blindly walk through to flash. cwm is 3.0.0.5 if that matters. thanks. on a side note. i think i have a new cm7rc2 build on a formated sd card to try and minimize the guess work on what to click
Click to expand...
Click to collapse
do you know how to confirm if you have S-OFF and if your phone is rooted?
no but when in hboot it says s-off in the top of the screen
nyamoV2 said:
no but when in hboot it says s-off in the top of the screen
Click to expand...
Click to collapse
OK...I sent you a PM just follow those directions and you will be good.
habanosrus said:
OK...I sent you a PM just follow those directions and you will be good.
Click to expand...
Click to collapse
thanks for the help, but i can't get back into the os to make sure that debugging is checked.
nyamoV2 said:
thanks for the help, but i can't get back into the os to make sure that debugging is checked.
Click to expand...
Click to collapse
pull your battery and just turn you phone on without going into Fastboot menu.
downloading now. will give update in a few min
also does it matter that my phone will not go past the white htc screen?
nyamoV2 said:
downloading now. will give update in a few min
also does it matter that my phone will not go past the white htc screen?
Click to expand...
Click to collapse
Are you saying that your phone shows the white HTC screen then fades to black?
if so, no, it doesn't matter...just press the power button to reboot your phone.
I'm a noob and I tried to install 3e recovery using the instructions and video supplied in this post http://forum.xda-developers.com/showthread.php?t=1105413
Everything seemed to work fine until I went into ROM manager and tried to backup current ROM (stock, rooted). I selected backup ROM and now my phone is sitting with the SAMSUNG logo and it hasn't moved from that in almost an hour. I'm not sure what to do to get the phone to boot up normally. I have done a battery pull but that didn't work. When I plug the phone into my computer, XP does recognize that is plugged in because it shows the internal and external sd cards in the My Computer window. I can't open either on by double clicking on the icon for each drive. I'm getting pretty desperate because I can't seem to figure out how to get the phone to boot normally. Any help and/or suggestions would be most helpful. Thanks!!!
Odin flash to stock in dev section
try a hard reset. you shouldnt pull batteries unless it is the last resort, linux needs to unmount the file system.
a hard reset(different from a factory reset) is accomplished by holding the vol up +vol dn + power at the same time untill the phone reboots. if you wait till the samsung screen pops up again and immediately release you may also enter 3e recovery mode.
try to just boot the phone into the ui first. if it is still ok, go into rom manager and "flash cwm recovery" choose captivate or i9000. reboot into 3e recovery(blue text), (select reboot recovery not backup) reinstall packages twice! you should now be at a green text cwm recovery. once you get it setup the backup link in rom manager should work.
if the phone fails to boot up after a hard reset, you can attemp to clear user data in 3e recovery. you can get to 3e with phone off(you may pull battery now if you need to) hold vol up+ vol dn + pwr and hold untill you see the "samsung" screen. then you can clear data/factory reset
if that doesn't help you can still use odin/heimdall to restore the phone with one of the roms that may already have modded 3e recovery and other nice features.
Thanks for all your help! I managed to get it back working using Odin. Now I'm on the Infused ROM and loving life. I'm going to save this post just in case I get into trouble again down the road.
Sent from my SAMSUNG-SGH-I997 using XDA App
Dani897 said:
try a hard reset. you shouldnt pull batteries unless it is the last resort, linux needs to unmount the file system.
a hard reset(different from a factory reset) is accomplished by holding the vol up +vol dn + power at the same time untill the phone reboots. if you wait till the samsung screen pops up again and immediately release you may also enter 3e recovery mode.
try to just boot the phone into the ui first. if it is still ok, go into rom manager and "flash cwm recovery" choose captivate or i9000. reboot into 3e recovery(blue text), (select reboot recovery not backup) reinstall packages twice! you should now be at a green text cwm recovery. once you get it setup the backup link in rom manager should work.
if the phone fails to boot up after a hard reset, you can attemp to clear user data in 3e recovery. you can get to 3e with phone off(you may pull battery now if you need to) hold vol up+ vol dn + pwr and hold untill you see the "samsung" screen. then you can clear data/factory reset
if that doesn't help you can still use odin/heimdall to restore the phone with one of the roms that may already have modded 3e recovery and other nice features.
Click to expand...
Click to collapse
hi dani, i got the same case. but mine cannot boot into CMW. my PC does not detect. any idea??
did you get this fix, I am having the same issue.
So u should use gtgs ultimate unbrick then follow this.
1: Root using super one click
2: Download 3e recovery save it to your SD card
3: Use root explorer to move the 3e recovery file to systim bin overwrite recovery file
4: Reboot phone
5: Download Rom manager and click flash clock work mod pic i9000 not the (mtd)
6: Once its done select reboot in recovery
7: In recovery click RE-INSTALL it should load then click re-install again and u should get green cwm then reboot and flash away
Sent from my SGH-I997 using XDA Premium App
LG_iiNsTiiNcT said:
So u should use gtgs ultimate unbrick then follow this.
1: Root using super one click
2: Download 3e recovery save it to your SD card
3: Use root explorer to move the 3e recovery file to systim bin overwrite recovery file
4: Reboot phone
5: Download Rom manager and click flash clock work mod pic i9000 not the (mtd)
6: Once its done select reboot in recovery
7: In recovery click RE-INSTALL it should load then click re-install again and u should get green cwm then reboot and flash away
Sent from my SGH-I997 using XDA Premium App
Click to expand...
Click to collapse
This is an old useless method... just Odin flash the community kernel v8... done..
Sent from my SGH-I997 using XDA App
I have had that same boot screen problem too, buy a jig and u can put it into download mode that way then when you use odin3 to restore stock, u can get the stock rom with the recovery in it for u and u just need to download the update.zip on rom manager and then go into recovery and run the update zip twice. http://forum.xda-developers.com/showthread.php?t=1092021
You should get a jig (http://www.ebay.com/sch/i.html?_nkw...dkw=jig&_osacat=0&_trksid=p3286.c0.m270.l1313) its a life saver in my opinion. because u can restore ur phone if u ever mess up.
I too am stuck at the Samsung logo. I've used Odin to revert to stock but I think the Stock I reverted to was AT&T rather than Rogers? I can't seem to find the Rogers stock. I've tried to get it into recovery mode, taking out the battery booting with power up and down, releasing power when the Samsung logo came up - no good, the logo stays. I'm at a loss? Any advice? Is the a full raft of pit / pda etc files for Odin that I can make the Rogers Infuse as it was day one?
Thanks for any help
I'm in the same boat... maybe it's because the rogers infuse comes as android 2.3? I hope a solution comes out soon!
Same here, Rogers Infuse. Stuck at Samsung logo. Tried infuse odin recovery, and community. Still no go. I tried flashing all the different stock/unbrick roms but nothing.
However, if I install Infused kernel/recovery, i can access the recovery and do a wipe/lagfix.
I was trying to flash to Infused and when I got to the step where the phone rebooted to CWM recovery it hang on the Samsung logo. After about 3 hours of trying various button resets the phone booted normally (ie not to CWM). They say the definition of insanity is trying the same thing over and over and expecting different results, well I went back through the same steps to flash to infused and again it froze on the Samsung logo, only I have no idea what I did last time to get it to boot normal, not to CWM. Since it did it before, there must be a combination...anybody know what it might be. I've read and tried everything on the forums. Thought I'd post here prior to using Odin. I am able to get to downloading screen by doing the button/USB cable combo.
I'm headed out of town and won't check this right away, but thanks for any posts with ideas.
xoltrix2000 said:
Same here, Rogers Infuse. Stuck at Samsung logo. Tried infuse odin recovery, and community. Still no go. I tried flashing all the different stock/unbrick roms but nothing.
However, if I install Infused kernel/recovery, i can access the recovery and do a wipe/lagfix.
Click to expand...
Click to collapse
Rogers Infuse users need to use the UXKG3 unbrick, not the UCKD5 or E3 unbricks.
The UXKG3 variant tends to fall to the second or third pages of the dev forum since it's far less commonly used.
Holy Crap - im hooped without my phone for work...!
reposting in new thread
Hi guys,
Here is the solution for this issue.
Just flash with this package that will totally reset your Infuse 4G to UCKJ4, do it with linux that worked for me.
Thanks to AdamOutler
Here is the post:
http://forum.xda-developers.com/showthread.php?t=1331381
After that just root, flash a new kernel and your Recovery Mode will resturs.
samsung infuse 4g rogers version stucked on samsung logo(rooted)
my samsung infuse 4g rogers version rooted with odin and with cynogen mod os running phone got strucked when changing the os to Infuse_4G_Remics-UX_v1.3.1.zip .it's showing only samsung logo and not booting to recovery screen when trying to get recovery ......anyone please help me regarding this problem.....it will be great help to me and most loving [email protected]
samsung infuse 4g (I997R) rogers version got stuck samsung logo
my samsung infuse 4g (I997R) got stuck samsung logo since 4 days...my phone was rooted by use of odin later i changed my os from 2.3.3 to cynogen os.later my baboon brain provoked me to change to Infuse_4G_Remics-UX_v1.3.1.zip .i was my mistake -my phone got stuck with samsung logo and not booting its my favorite phone ever i had...please let me know anyone how to solve the problem in this regard......it will be big big help to me....and i will thankful to them,,,,,,,,,,,,,my email id
[email protected]
rajeshvarma999 said:
my samsung infuse 4g rogers version rooted with odin and with cynogen mod os running phone got strucked when changing the os to Infuse_4G_Remics-UX_v1.3.1.zip .it's showing only samsung logo and not booting to recovery screen when trying to get recovery ......anyone please help me regarding this problem.....it will be great help to me and most loving [email protected]
Click to expand...
Click to collapse
Go here: http://forum.xda-developers.com/showthread.php?t=1326143
The few last posts have mirrors. You are gonna need the odin pack to flash back to stock and then work your way up.
You need to flash ICS before flashing JB.
Infuse 4G wont boot - no root, CWM, Passcode locked
Hi guys
I dont know where to start from. This Infuse 4G was dropped by the owner and we happened to come across it.
Checked the SIM card but that was already deactivated and there were no contacts on it.
Then we wanted to check the phonebook and find someone to contact, but the phone was passcode locked.
Then i went and flashed Odin_Community_Kernel_v8.zip since it was on GB, but it doesnt seem to be booting. I was planning on adb-ing into it when it was in recovery (CWM) so that i could delete the passcode and find a way to get in touch with the owner.
Now am stuck at the Samsung logo...:crying:
Hey,
I've recently had a friend of mine give me his phone to look at.
It's a Samsung I5801
I tried installing numerous ROM's onto this such as stock froyo and kyrillos 9.
Whenever i install through Odin i get to the stage where the data needs to be wiped through clockwork. Pretty straight forward, however when the phone is rebooted after this Odin does not detect the phone and will boot into recovery again.
Any ideas? I'm not much of a samsung kinda guy woking with htc all my life lol.
Solved.
Flashing a stock ROM, with bootloader in tact did the job. Had to say was sweating a bit as many were saying it could hard brick phone... Used European JPA.
Flash through ODIN i pray to god no one else has this problem
Wipe using Recovery
Just go in recovery mode and Wipe Cache and Dalvik-Cache.
Problem solved........
I have hard bricked my galaxy 3
I installed ClockworkMod recovery and selected to install ROM from SD card
my phone restarted and booted in samsung,s recovery mode
I selected wipe data and nothing happened for next in 2-3 mins,
So I removed battery and rebooted phone which again booted in samsung,s recovery mode for number of trials.
Then I renamed Rom Filr name to update.zip and moved it to root of SD
and rebooted in recovery and selected option Install update.zip which after some time started executing.
Phone rebooted and now it doesn't show anything else than samsung boot logo.
please help me out.
UPDATE:
Download mode and Upload mode are working but Boot menu is not working.
>>[email protected]<< said:
UPDATE:
Download mode and Upload mode are working but Boot menu is not working.
Click to expand...
Click to collapse
Just give it a try via ODIN since download mode is working
This link might help you ,
he has clearly explained the Odin process to
flash Roms and several do's and dont's
http://forum.xda-developers.com/showthread.php?t=1372414
I was rooted with CWM recovery. I odin flashed stock with root injected and then flashed via odin stock kernel and recovery. At this time I was able to pull the update and the device restarted to install. Upon 100% completion the device rebooted as I woudl expect but upon reboot it goes right back into the install, hits 100% and does the same thing. It appears Im stuck in a update boot loop. Has anyone else experienced this?
I did a odin restore with Stock 8013.tar with root injected but upon reboot once odin completes it goes right back into this update loop. Someone please help!!!!
ej_424 said:
I was rooted with CWM recovery. I odin flashed stock with root injected and then flashed via odin stock kernel and recovery. At this time I was able to pull the update and the device restarted to install. Upon 100% completion the device rebooted as I woudl expect but upon reboot it goes right back into the install, hits 100% and does the same thing. It appears Im stuck in a update boot loop. Has anyone else experienced this?
I did a odin restore with Stock 8013.tar with root injected but upon reboot once odin completes it goes right back into this update loop. Someone please help!!!!
Click to expand...
Click to collapse
Just flashed stock kernel and recovery via odin and same thing happens. Just after samsung logo on splash screen it goes into the android character with a percentage for an update being applied. It hits 100% and sits there for a couple minutes, reboots and does the same thing all over.
I"m desperate and need this to get fixed!!
ej_424 said:
Just flashed stock kernel and recovery via odin and same thing happens. Just after samsung logo on splash screen it goes into the android character with a percentage for an update being applied. It hits 100% and sits there for a couple minutes, reboots and does the same thing all over.
I"m desperate and need this to get fixed!!
Click to expand...
Click to collapse
I flashed the stock n8000 recovery file via odin and it booted me out of the update loop. I had to do it twice tho. I rooted via odin so our fixes may be different.
I used file posted here http://forum.xda-developers.com/showthread.php?p=30450339#post30450339 post 45
Hope this helps a little
ej_424 said:
I was rooted with CWM recovery. I odin flashed stock with root injected and then flashed via odin stock kernel and recovery. At this time I was able to pull the update and the device restarted to install. Upon 100% completion the device rebooted as I woudl expect but upon reboot it goes right back into the install, hits 100% and does the same thing. It appears Im stuck in a update boot loop. Has anyone else experienced this?
I did a odin restore with Stock 8013.tar with root injected but upon reboot once odin completes it goes right back into this update loop. Someone please help!!!!
Click to expand...
Click to collapse
ej_424 said:
Just flashed stock kernel and recovery via odin and same thing happens. Just after samsung logo on splash screen it goes into the android character with a percentage for an update being applied. It hits 100% and sits there for a couple minutes, reboots and does the same thing all over.
I"m desperate and need this to get fixed!!
Click to expand...
Click to collapse
Ok I'm backup and running. I had to flash "HighonAndroidCWMRecovery" via odin to get past the update loop. Any ideas why this woudl be? I'm running stock with root and custom recovery. If I flash stock recvoery again and attempt the update do you think the same thing will occur?
ej_424 said:
Ok I'm backup and running. I had to flash "HighonAndroidCWMRecovery" via odin to get past the update loop. Any ideas why this woudl be? I'm running stock with root and custom recovery. If I flash stock recvoery again and attempt the update do you think the same thing will occur?
Click to expand...
Click to collapse
This need not be so complicated follow directions here http://forum.xda-developers.com/showthread.php?t=1847054&page=6 see post 58 and 39
Stuck, can't restore factory settings
I tried to unroot my Galaxy note 10.1 wi-fi and have caused such damage that it won't boot up. I have tried to press the power and down volume and I either get the Black welcome screen stuck, requesting I download the md5 file (which I have tried and doesn't work) or asks to use Kies to boot, but my laptops won't even pick up the device, they recognizes that there is a new device connected but it can't read it!
In the top left hand corner it reads
ODIN MODE (in red letters)
Product name: GT-N8010
Customer binary: yes (20 counts)
Current Binary: Custom
System status: Custom
PLEASE HELP!!!!
Thanks in advance
bee_rob said:
I tried to unroot my Galaxy note 10.1 wi-fi and have caused such damage that it won't boot up. I have tried to press the power and down volume and I either get the Black welcome screen stuck, requesting I download the md5 file (which I have tried and doesn't work) or asks to use Kies to boot, but my laptops won't even pick up the device, they recognizes that there is a new device connected but it can't read it!
In the top left hand corner it reads
ODIN MODE (in red letters)
Product name: GT-N8010
Customer binary: yes (20 counts)
Current Binary: Custom
System status: Custom
PLEASE HELP!!!!
Thanks in advance
Click to expand...
Click to collapse
I have same Problem
My only response would be to go to sammobile and download as close to shipped rom as you can (must be for your region and carrier, if from carrier), updated rom is fine. Make sure the download ISN'T corrupted by doing an MD5 check.. Also before f;lashing, make sure you exit KIES as this can screw up the connection in ODIN.
Put in Download mode, hold down volume and power until it says a scary warning, ignore the warning and press up volume.
Flash with ODIN making sure re-partition ISN'T ticked, when it finishes flashing turn off power.
Go to recovery by holding up volume and power button until it goes into recovery.
Wipe data/cache and then wipe dalvik cache.
Reboot and see what happens.
Good luck.
ultramag69 said:
My only response would be to go to sammobile and download as close to shipped rom as you can (must be for your region and carrier, if from carrier), updated rom is fine. Make sure the download ISN'T corrupted by doing an MD5 check.. Also before f;lashing, make sure you exit KIES as this can screw up the connection in ODIN.
Put in Download mode, hold down volume and power until it says a scary warning, ignore the warning and press up volume.
Flash with ODIN making sure re-partition ISN'T ticked, when it finishes flashing turn off power.
Go to recovery by holding up volume and power button until it goes into recovery.
Wipe data/cache and then wipe dalvik cache.
Reboot and see what happens.
Good luck.
Click to expand...
Click to collapse
Not working, not go the Recovery Mode, Only Samsung Logo.
I'm having similar issue as Odin keeps failing when trying to flash ROM.
Does anyone know the commands to do it through ADB? I've done it before on my nexus7 but don't know the commands to exactly use for the note. I still can't get into recovery. Only can get into that ODIN mode. I have all drivers and Android ADB installed on PC.
It seems like nothing will write to the NAND. Although my flash count changes now showing my attempts. I might have no choice but to call Samsung and file a warranty claim. I just don't want to lose all the pictures and info that's in my tablet.
Well I got my tablet back yesterday from Samsung. They fixed it. The report showed they replaced some piece that burned out. I forgot the name of it. Unfortunately all my info and stuff was erased. So I had to reinstall everything manually. At least my tablet working like new again. So glad to have it back. Been like a month or so since I've been able to use it. My nexus 7 and galaxy s3 was holding me down in the meanwhile.
This note is a great device. IM seeing again why I've missed it so much. Works flawlessly on stock Tom.
Hello, i am having a big problem with my samsung epic 4g touch! Im not sure to exactly what caused this... But i was installing the CW Mod recovery with ODIN. Then i rebooted off of download mode. And my phone stays on the booting screen. I heard of this many times. But this booting screen has a type of caution sign below it, i am still able to enter recovery mode and download mode. In recovery mode, ever single option says -NO though.. Im not sure if i bricked my phone or what? Can anyone please help me!
Thankyou.
Get back into download mode, flash cwm again, GO STRAIGHT INTO CWM!!!! The ROM you had before using ODIN will not boot, you're forced to boot into recovery immediately. Make sure you have a ROM zip to install a ROM right after, you'll have issues if you try to boot TouchWiz stock. The triangle on the GS2 logo is normal, it means you've flash custom stuff through ODIN.