Database Info

[Q] **HELP** Infuse stuck at SAMSUNG logo

I'm a noob and I tried to install 3e recovery using the instructions and video supplied in this post http://forum.xda-developers.com/showthread.php?t=1105413
Everything seemed to work fine until I went into ROM manager and tried to backup current ROM (stock, rooted). I selected backup ROM and now my phone is sitting with the SAMSUNG logo and it hasn't moved from that in almost an hour. I'm not sure what to do to get the phone to boot up normally. I have done a battery pull but that didn't work. When I plug the phone into my computer, XP does recognize that is plugged in because it shows the internal and external sd cards in the My Computer window. I can't open either on by double clicking on the icon for each drive. I'm getting pretty desperate because I can't seem to figure out how to get the phone to boot normally. Any help and/or suggestions would be most helpful. Thanks!!!

Odin flash to stock in dev section

try a hard reset. you shouldnt pull batteries unless it is the last resort, linux needs to unmount the file system.
a hard reset(different from a factory reset) is accomplished by holding the vol up +vol dn + power at the same time untill the phone reboots. if you wait till the samsung screen pops up again and immediately release you may also enter 3e recovery mode.
try to just boot the phone into the ui first. if it is still ok, go into rom manager and "flash cwm recovery" choose captivate or i9000. reboot into 3e recovery(blue text), (select reboot recovery not backup) reinstall packages twice! you should now be at a green text cwm recovery. once you get it setup the backup link in rom manager should work.
if the phone fails to boot up after a hard reset, you can attemp to clear user data in 3e recovery. you can get to 3e with phone off(you may pull battery now if you need to) hold vol up+ vol dn + pwr and hold untill you see the "samsung" screen. then you can clear data/factory reset
if that doesn't help you can still use odin/heimdall to restore the phone with one of the roms that may already have modded 3e recovery and other nice features.

Thanks for all your help! I managed to get it back working using Odin. Now I'm on the Infused ROM and loving life. I'm going to save this post just in case I get into trouble again down the road.
Sent from my SAMSUNG-SGH-I997 using XDA App

Dani897 said:
try a hard reset. you shouldnt pull batteries unless it is the last resort, linux needs to unmount the file system.
a hard reset(different from a factory reset) is accomplished by holding the vol up +vol dn + power at the same time untill the phone reboots. if you wait till the samsung screen pops up again and immediately release you may also enter 3e recovery mode.
try to just boot the phone into the ui first. if it is still ok, go into rom manager and "flash cwm recovery" choose captivate or i9000. reboot into 3e recovery(blue text), (select reboot recovery not backup) reinstall packages twice! you should now be at a green text cwm recovery. once you get it setup the backup link in rom manager should work.
if the phone fails to boot up after a hard reset, you can attemp to clear user data in 3e recovery. you can get to 3e with phone off(you may pull battery now if you need to) hold vol up+ vol dn + pwr and hold untill you see the "samsung" screen. then you can clear data/factory reset
if that doesn't help you can still use odin/heimdall to restore the phone with one of the roms that may already have modded 3e recovery and other nice features.
Click to expand...
Click to collapse
hi dani, i got the same case. but mine cannot boot into CMW. my PC does not detect. any idea??

did you get this fix, I am having the same issue.

So u should use gtgs ultimate unbrick then follow this.
1: Root using super one click
2: Download 3e recovery save it to your SD card
3: Use root explorer to move the 3e recovery file to systim bin overwrite recovery file
4: Reboot phone
5: Download Rom manager and click flash clock work mod pic i9000 not the (mtd)
6: Once its done select reboot in recovery
7: In recovery click RE-INSTALL it should load then click re-install again and u should get green cwm then reboot and flash away
Sent from my SGH-I997 using XDA Premium App

LG_iiNsTiiNcT said:
So u should use gtgs ultimate unbrick then follow this.
1: Root using super one click
2: Download 3e recovery save it to your SD card
3: Use root explorer to move the 3e recovery file to systim bin overwrite recovery file
4: Reboot phone
5: Download Rom manager and click flash clock work mod pic i9000 not the (mtd)
6: Once its done select reboot in recovery
7: In recovery click RE-INSTALL it should load then click re-install again and u should get green cwm then reboot and flash away
Sent from my SGH-I997 using XDA Premium App
Click to expand...
Click to collapse
This is an old useless method... just Odin flash the community kernel v8... done..
Sent from my SGH-I997 using XDA App

I have had that same boot screen problem too, buy a jig and u can put it into download mode that way then when you use odin3 to restore stock, u can get the stock rom with the recovery in it for u and u just need to download the update.zip on rom manager and then go into recovery and run the update zip twice. http://forum.xda-developers.com/showthread.php?t=1092021
You should get a jig (http://www.ebay.com/sch/i.html?_nkw...dkw=jig&_osacat=0&_trksid=p3286.c0.m270.l1313) its a life saver in my opinion. because u can restore ur phone if u ever mess up.

I too am stuck at the Samsung logo. I've used Odin to revert to stock but I think the Stock I reverted to was AT&T rather than Rogers? I can't seem to find the Rogers stock. I've tried to get it into recovery mode, taking out the battery booting with power up and down, releasing power when the Samsung logo came up - no good, the logo stays. I'm at a loss? Any advice? Is the a full raft of pit / pda etc files for Odin that I can make the Rogers Infuse as it was day one?
Thanks for any help

I'm in the same boat... maybe it's because the rogers infuse comes as android 2.3? I hope a solution comes out soon!

Same here, Rogers Infuse. Stuck at Samsung logo. Tried infuse odin recovery, and community. Still no go. I tried flashing all the different stock/unbrick roms but nothing.
However, if I install Infused kernel/recovery, i can access the recovery and do a wipe/lagfix.

I was trying to flash to Infused and when I got to the step where the phone rebooted to CWM recovery it hang on the Samsung logo. After about 3 hours of trying various button resets the phone booted normally (ie not to CWM). They say the definition of insanity is trying the same thing over and over and expecting different results, well I went back through the same steps to flash to infused and again it froze on the Samsung logo, only I have no idea what I did last time to get it to boot normal, not to CWM. Since it did it before, there must be a combination...anybody know what it might be. I've read and tried everything on the forums. Thought I'd post here prior to using Odin. I am able to get to downloading screen by doing the button/USB cable combo.
I'm headed out of town and won't check this right away, but thanks for any posts with ideas.

xoltrix2000 said:
Same here, Rogers Infuse. Stuck at Samsung logo. Tried infuse odin recovery, and community. Still no go. I tried flashing all the different stock/unbrick roms but nothing.
However, if I install Infused kernel/recovery, i can access the recovery and do a wipe/lagfix.
Click to expand...
Click to collapse
Rogers Infuse users need to use the UXKG3 unbrick, not the UCKD5 or E3 unbricks.
The UXKG3 variant tends to fall to the second or third pages of the dev forum since it's far less commonly used.

Holy Crap - im hooped without my phone for work...!
reposting in new thread

Hi guys,
Here is the solution for this issue.
Just flash with this package that will totally reset your Infuse 4G to UCKJ4, do it with linux that worked for me.
Thanks to AdamOutler
Here is the post:
http://forum.xda-developers.com/showthread.php?t=1331381
After that just root, flash a new kernel and your Recovery Mode will resturs.

samsung infuse 4g rogers version stucked on samsung logo(rooted)
my samsung infuse 4g rogers version rooted with odin and with cynogen mod os running phone got strucked when changing the os to Infuse_4G_Remics-UX_v1.3.1.zip .it's showing only samsung logo and not booting to recovery screen when trying to get recovery ......anyone please help me regarding this problem.....it will be great help to me and most loving [email protected]

samsung infuse 4g (I997R) rogers version got stuck samsung logo
my samsung infuse 4g (I997R) got stuck samsung logo since 4 days...my phone was rooted by use of odin later i changed my os from 2.3.3 to cynogen os.later my baboon brain provoked me to change to Infuse_4G_Remics-UX_v1.3.1.zip .i was my mistake -my phone got stuck with samsung logo and not booting its my favorite phone ever i had...please let me know anyone how to solve the problem in this regard......it will be big big help to me....and i will thankful to them,,,,,,,,,,,,,my email id
[email protected]

rajeshvarma999 said:
my samsung infuse 4g rogers version rooted with odin and with cynogen mod os running phone got strucked when changing the os to Infuse_4G_Remics-UX_v1.3.1.zip .it's showing only samsung logo and not booting to recovery screen when trying to get recovery ......anyone please help me regarding this problem.....it will be great help to me and most loving [email protected]
Click to expand...
Click to collapse
Go here: http://forum.xda-developers.com/showthread.php?t=1326143
The few last posts have mirrors. You are gonna need the odin pack to flash back to stock and then work your way up.
You need to flash ICS before flashing JB.

Infuse 4G wont boot - no root, CWM, Passcode locked
Hi guys
I dont know where to start from. This Infuse 4G was dropped by the owner and we happened to come across it.
Checked the SIM card but that was already deactivated and there were no contacts on it.
Then we wanted to check the phonebook and find someone to contact, but the phone was passcode locked.
Then i went and flashed Odin_Community_Kernel_v8.zip since it was on GB, but it doesnt seem to be booting. I was planning on adb-ing into it when it was in recovery (CWM) so that i could delete the passcode and find a way to get in touch with the owner.
Now am stuck at the Samsung logo...:crying:

Stuck in Update boot loop Please Help!!!

I was rooted with CWM recovery. I odin flashed stock with root injected and then flashed via odin stock kernel and recovery. At this time I was able to pull the update and the device restarted to install. Upon 100% completion the device rebooted as I woudl expect but upon reboot it goes right back into the install, hits 100% and does the same thing. It appears Im stuck in a update boot loop. Has anyone else experienced this?
I did a odin restore with Stock 8013.tar with root injected but upon reboot once odin completes it goes right back into this update loop. Someone please help!!!!

ej_424 said:
I was rooted with CWM recovery. I odin flashed stock with root injected and then flashed via odin stock kernel and recovery. At this time I was able to pull the update and the device restarted to install. Upon 100% completion the device rebooted as I woudl expect but upon reboot it goes right back into the install, hits 100% and does the same thing. It appears Im stuck in a update boot loop. Has anyone else experienced this?
I did a odin restore with Stock 8013.tar with root injected but upon reboot once odin completes it goes right back into this update loop. Someone please help!!!!
Click to expand...
Click to collapse
Just flashed stock kernel and recovery via odin and same thing happens. Just after samsung logo on splash screen it goes into the android character with a percentage for an update being applied. It hits 100% and sits there for a couple minutes, reboots and does the same thing all over.
I"m desperate and need this to get fixed!!

ej_424 said:
Just flashed stock kernel and recovery via odin and same thing happens. Just after samsung logo on splash screen it goes into the android character with a percentage for an update being applied. It hits 100% and sits there for a couple minutes, reboots and does the same thing all over.
I"m desperate and need this to get fixed!!
Click to expand...
Click to collapse
I flashed the stock n8000 recovery file via odin and it booted me out of the update loop. I had to do it twice tho. I rooted via odin so our fixes may be different.
I used file posted here http://forum.xda-developers.com/showthread.php?p=30450339#post30450339 post 45
Hope this helps a little

ej_424 said:
I was rooted with CWM recovery. I odin flashed stock with root injected and then flashed via odin stock kernel and recovery. At this time I was able to pull the update and the device restarted to install. Upon 100% completion the device rebooted as I woudl expect but upon reboot it goes right back into the install, hits 100% and does the same thing. It appears Im stuck in a update boot loop. Has anyone else experienced this?
I did a odin restore with Stock 8013.tar with root injected but upon reboot once odin completes it goes right back into this update loop. Someone please help!!!!
Click to expand...
Click to collapse
ej_424 said:
Just flashed stock kernel and recovery via odin and same thing happens. Just after samsung logo on splash screen it goes into the android character with a percentage for an update being applied. It hits 100% and sits there for a couple minutes, reboots and does the same thing all over.
I"m desperate and need this to get fixed!!
Click to expand...
Click to collapse
Ok I'm backup and running. I had to flash "HighonAndroidCWMRecovery" via odin to get past the update loop. Any ideas why this woudl be? I'm running stock with root and custom recovery. If I flash stock recvoery again and attempt the update do you think the same thing will occur?

ej_424 said:
Ok I'm backup and running. I had to flash "HighonAndroidCWMRecovery" via odin to get past the update loop. Any ideas why this woudl be? I'm running stock with root and custom recovery. If I flash stock recvoery again and attempt the update do you think the same thing will occur?
Click to expand...
Click to collapse
This need not be so complicated follow directions here http://forum.xda-developers.com/showthread.php?t=1847054&page=6 see post 58 and 39

Stuck, can't restore factory settings
I tried to unroot my Galaxy note 10.1 wi-fi and have caused such damage that it won't boot up. I have tried to press the power and down volume and I either get the Black welcome screen stuck, requesting I download the md5 file (which I have tried and doesn't work) or asks to use Kies to boot, but my laptops won't even pick up the device, they recognizes that there is a new device connected but it can't read it!
In the top left hand corner it reads
ODIN MODE (in red letters)
Product name: GT-N8010
Customer binary: yes (20 counts)
Current Binary: Custom
System status: Custom
PLEASE HELP!!!!
Thanks in advance

bee_rob said:
I tried to unroot my Galaxy note 10.1 wi-fi and have caused such damage that it won't boot up. I have tried to press the power and down volume and I either get the Black welcome screen stuck, requesting I download the md5 file (which I have tried and doesn't work) or asks to use Kies to boot, but my laptops won't even pick up the device, they recognizes that there is a new device connected but it can't read it!
In the top left hand corner it reads
ODIN MODE (in red letters)
Product name: GT-N8010
Customer binary: yes (20 counts)
Current Binary: Custom
System status: Custom
PLEASE HELP!!!!
Thanks in advance
Click to expand...
Click to collapse
I have same Problem

My only response would be to go to sammobile and download as close to shipped rom as you can (must be for your region and carrier, if from carrier), updated rom is fine. Make sure the download ISN'T corrupted by doing an MD5 check.. Also before f;lashing, make sure you exit KIES as this can screw up the connection in ODIN.
Put in Download mode, hold down volume and power until it says a scary warning, ignore the warning and press up volume.
Flash with ODIN making sure re-partition ISN'T ticked, when it finishes flashing turn off power.
Go to recovery by holding up volume and power button until it goes into recovery.
Wipe data/cache and then wipe dalvik cache.
Reboot and see what happens.
Good luck.

ultramag69 said:
My only response would be to go to sammobile and download as close to shipped rom as you can (must be for your region and carrier, if from carrier), updated rom is fine. Make sure the download ISN'T corrupted by doing an MD5 check.. Also before f;lashing, make sure you exit KIES as this can screw up the connection in ODIN.
Put in Download mode, hold down volume and power until it says a scary warning, ignore the warning and press up volume.
Flash with ODIN making sure re-partition ISN'T ticked, when it finishes flashing turn off power.
Go to recovery by holding up volume and power button until it goes into recovery.
Wipe data/cache and then wipe dalvik cache.
Reboot and see what happens.
Good luck.
Click to expand...
Click to collapse
Not working, not go the Recovery Mode, Only Samsung Logo.

I'm having similar issue as Odin keeps failing when trying to flash ROM.
Does anyone know the commands to do it through ADB? I've done it before on my nexus7 but don't know the commands to exactly use for the note. I still can't get into recovery. Only can get into that ODIN mode. I have all drivers and Android ADB installed on PC.
It seems like nothing will write to the NAND. Although my flash count changes now showing my attempts. I might have no choice but to call Samsung and file a warranty claim. I just don't want to lose all the pictures and info that's in my tablet.

Well I got my tablet back yesterday from Samsung. They fixed it. The report showed they replaced some piece that burned out. I forgot the name of it. Unfortunately all my info and stuff was erased. So I had to reinstall everything manually. At least my tablet working like new again. So glad to have it back. Been like a month or so since I've been able to use it. My nexus 7 and galaxy s3 was holding me down in the meanwhile.
This note is a great device. IM seeing again why I've missed it so much. Works flawlessly on stock Tom.

[Q] HELP! lg g2 stuck in boot loop

I have an at&t LG G2 D800 the android version is 4.2.2. my phone is ROOTED and I do have PHILZ Recovery. I was trying to do a hard reset or factory reset not sure what the difference is. what seemed to happen in the process is my phone was almost completely formatted and now i have access to only download mode and I can get into Philz Recover still. other then that when i boot my phone up it just gets stuck on LG boot up screen and my LED notification light blinks. need help please. cant seem to find solution or I just haven't looked in the right place yet. if anyone knows how to help or at least point me in the right direction. I give huge thanks in advance.

So you have a custom recovery installed. Good! Head over to your phones forum section and look for a stock ROM if you can find it.
If not then find an aftermarket one. Once you have found one. Download the needed files. Some included Google apps and some don't. It'll state it. Download the two zips or one if everything's together. Boot into recovery mode on your phone, and select storage and mounts.
From there go to the bottom or look for mount internal SD card or external SD card. Mount it. Then transfer the files you had downloaded to the root of your phone. Once done. Un mount it and remove the cable. Go to the menu of the recovery, select factory reset option. Then install the .zips.
Your phone should then boot up. Something must have gone wrong when you had done a hard reset.
Reply back when you've done the above. And tell me how it went.
Sent from my Nexus 5 using Tapatalk

Thank you for your help. my download speed is horrible so i'm in the process of downloading the two zip files for going back to stock. ill let you know when i get them downloaded and if it works.

Okay, good luck!
Sent from my Nexus 5 using Tapatalk

I have the same problem. I was running 4.2.2 rom under twrp recovery. Then I flasher Philz and flashed 4.4.2 rom. I was unsatisfied with it so I flashed back the old recovery so I could restore the backup. I booted twrp, recovered the backup and reeboted the system. After booting it was saying some crap like this and that procces stopped. Now Im flashing the .zip (just downloaded rom, no data), and after that its there just the boot loop (lg picture and blinking LED). Please help what to do :good:

you should flash via download mode with kdz file to go back to stock

I don't know if it's better etiquette to semi-hijack this thread or post a new thread, but I've created the same problem for myself today. I instaled TWRP recovery successfully and downloaded a CM11 nightly along with gapps for CM11. Today I installed the zips but when my phone rebooted it started the endless LG logo loop thing, which sounds the same as he describes.
I can't seem to boot into my recovery with any key combination. Volume up and power, volume down and power, they all lead to a "Hardware Key Control Mode" menu. At this point my goal is a factory reset. Maybe the same solution that helps him will help me? I need to get the phone into either download mode or to the TWRP menu.

InlineFourPower said:
I don't know if it's better etiquette to semi-hijack this thread or post a new thread, but I've created the same problem for myself today. I instaled TWRP recovery successfully and downloaded a CM11 nightly along with gapps for CM11. Today I installed the zips but when my phone rebooted it started the endless LG logo loop thing, which sounds the same as he describes.
I can't seem to boot into my recovery with any key combination. Volume up and power, volume down and power, they all lead to a "Hardware Key Control Mode" menu. At this point my goal is a factory reset. Maybe the same solution that helps him will help me? I need to get the phone into either download mode or to the TWRP menu.
Click to expand...
Click to collapse
Im also trying to get into download mode. But it wont let me Im following this thread.
http://forum.xda-developers.com/showthread.php?t=2432476&highlight=download+mode

ace plus only the boot and is just entering recovery mode

installed a rom on my phone everything worked out more he was unable to boot from, and shall not enter into recovery mode and not switch the phone on. Once this happened, installed the boot root file by odin it restarted my phone more now spoiled the usb input. I wonder if it is to boot from the sd card or create this file and try to install the original rom just not going to skin recovery mode bad file. I thank you.

No boot phone
leougosc said:
installed a rom on my phone everything worked out more he was unable to boot from, and shall not enter into recovery mode and not switch the phone on. Once this happened, installed the boot root file by odin it restarted my phone more now spoiled the usb input. I wonder if it is to boot from the sd card or create this file and try to install the original rom just not going to skin recovery mode bad file. I thank you.
Click to expand...
Click to collapse
I installed this rom CyanogenMOd 10.1 Jelly Beam of Ace Plus s7500L everything worked out over time to reset the phone back to the recovery mode and does not start the phone only opens in the recovery mode screen, not the boot. someone help me?

Sounds like a recovery boot loop.Try to flash the recovery again through odin.

TWRP Problem

Long story short, I tried to install TWRP with odin and my phone keeps restarting after I did the reboot from the recovery.
This is roughly what I did:
Installed the adb stuff and android studio(because I don't know if the adb stuff was installed correctly)
Do the volume button stuff for download mode
Connect cable
Open odin
Add the latest twrp file in the AP space and start
The phone booted up regularly ... I can't remember which thread it was but it said to remove battery then boot to recovery so I did it.
The instruction I followed said to advance wipe something but I accidentally swiped to factory reset then it booted back to recovery I think then I went back to wipe what I missed earlier then I tapped reboot and system and it keeps restarting all the time.
I can still enter the twrp recovery mode and the downloading mode.
I think it's a boot loop and I read threads where the simple instruction doesn't work and I haven't tried the command stuff.
Hope someone can help me.