Database Info

##UDATED 10MAR12## [TWEAK] Lightning Zap

READ ENTIRE OP!!!!!!!!!!!!!!!!!!!!
I took ASXIX, ASv15, added parts from Thunderbolt and a few tweaks from a Cappy ROM (Fasty III), edited a few things here and there, combined them together and flashed them. I got INSANE battery life, super fast performance, shorter boot times, smooth transitions, faster sdcard read/write speed, and higher quad scores (I know most people say those don't matter, but it does account for something).
DO NOT USE THIS WITH RAVERX3X'S OCTANE 3.0
ONLY USE v5 Upgrade if you are currently using any other version of Lightning Zap
Made 3 version
v5 for all ROMs
v5 Upgrade if you are currently on an older version of Lightning Zap
v5 MIUI is for MIUI ONLY
v5
Now adjusts filesystem with tune2fs (still ext4fs) to disable journaling, improve responsiveness, smoothness, and overall performance
Contains newest build.prop tweaks from dsexton702
Now uses Aroma installer by FBis251
Removed duplicate scripts
Added newest FUGU (Actually did that on v3, but failed to mention it)
Reformatted governor tweak a bit (easier to follow instructions to change values)
Decided NOT to add the journaling script and data2ext... for now
Quads hit 2432 on first run and averaged 2696 out of 3 runs, Not OC'd
v5 takes quite a while to install (about 20 to 30 minutes...maybe longer). If you experience FC's, fix permissions and reboot. As we all know, or should know, backups don't always like to play right when restored.
On v5 quads are hitting 3100+ average...
Must be rooted, on Gingerbread build that supports init.d, and have a kernel with voodoo. this has been tested on SG4G and Captivate but it may work on other devices (if you have flashing issues push manually or PM me for help)
DISCLAIMER
I am not responsible for any damage this may cause to your device.
Don't forget to make a backup! Just in case...
INSTRUCTIONS
Download zip and place on sdcard, reboot to recovery, install zip, follow prompts in Aroma installer (No options to change in custom install so use Quick Install), reboot phone, let sit for at least 10 minutes, REBOOT, enjoy!
This can be flashed directly over older versions of Lightning Zap.
Want to get more out of Lightning Zap?
Refer here:
More Tweaking
If you are not getting the battery life/performance others are getting, refer here:
Gremlin Remover
To see what tune2fs does (and verify journaling is disabled) type:
Code:
tune2fs -l /dev/block/stl9
tune2fs -l /dev/block/stl10
tune2fs -l /dev/block/stl11
For an example of results refer to this post:
tune2fs results on /system partition
Special Thanks to
GreyDark
dsexton702
LOSTLOGIC89
pikachu01
tehgyb
FBis251 for the awesome installer
And all the super awesome DEVs that help us!
Download links just below here

Nice...... Will have to take a look at this

Will check it out... Is the attached Quad Score Stock or OC'd ??

Racing19969 said:
Will check it out... Is the attached Quad Score Stock or OC'd ??
Click to expand...
Click to collapse
OC'd. The original score was 1301. Mind you, for battery life purposes, the tweak I added LIGHTLY overclocks the phone. If you want to increase the oc, use tegrak overclock (preferably paid so changes will stay after boot). I just tried the free version, and it shot my quad score to 2604.

Well, the tweaks definately work... I ran stock on aosp kj1 kernel and scored 1718.
Then installed and ran again, scored 1943 stock. Then Installed new kj6 kernel and ran again and scored 2149 stock no oc. Rebooted phone a couple of times and played around with some programs to let sink in. Now I ran quadrant again stock and got my highest score yet for a stock rom 2408.. added image

Should we delete the init.d scripts that are on the phone before flashing?
Sent from my SGH-T959V using xda premium

steeleain said:
Should we delete the init.d scripts that are on the phone before flashing?
Sent from my SGH-T959V using xda premium
Click to expand...
Click to collapse
No, thanks to dsexton's script, we don't have to do that... Just flash and enjoy.

Working really well
Sent from my SGH-T959V using XDA App

Hi Thomas
I'm currently testing it.
Are you sure there are no duplications? I see 2 SDCard speedfixes in init.d...
Sent from me

itzik2sh said:
Hi Thomas
I'm currently testing it.
Are you sure there are no duplications? I see 2 SDCard speedfixes in init.d...
Sent from me
Click to expand...
Click to collapse
The S77-sdcard-speedfix raises the read ahead from 3072 to 4096. I tried running it without it (just raised the threshold in 02speedcardfix) and the performance was good (17.28 mb/s), but I got much higher readings (22.13 mb/s) when I changed the 02sdcardspeedfix back to 3072 and added the S77-sdcard-speedfix back into it. (These numbers are referenced from DeviceMark app).

Thanks
this is super fast thanks what a brilliant mind for tweaking this everything is 10x faster

bd1692 said:
this is super fast thanks what a brilliant mind for tweaking this everything is 10x faster
Click to expand...
Click to collapse
You are welcome and thank you. But keep in mind, I got these tweaks from dsexton702 and LOSTLOGIC89, made a few minor adjustments, and just combined them together. But the really great thing about it, the more you play with your phone and the more they soak in, the better things get.

I've modified as myself with different tweaks and noticed the ones I, modified happen to be the ones you didn't and I get the same quad either way... I'm thinking if I add mine to yours there may be a little boost. I'll have to try it out tonight. it pertains to system_server, app_process and the sqlite libraries
Sent from my SGH-T959V

tehgyb said:
I've modified as myself with different tweaks and noticed the ones I, modified happen to be the ones you didn't and I get the same quad either way... I'm thinking if I add mine to yours there may be a little boost. I'll have to try it out tonight. it pertains to system_server, app_process and the sqlite libraries
Sent from my SGH-T959V
Click to expand...
Click to collapse
Awesome. Let me know how it works out, and if you want, we can add your tweaks as well.

thomas.raines said:
Awesome. Let me know how it works out, and if you want, we can add your tweaks as well.
Click to expand...
Click to collapse
Word, will do bud
Sent from my SGH-T959V

Do you think this will work with the SGS2?

kaizasoshi said:
Do you think this will work with the SGS2?
Click to expand...
Click to collapse
I would say yes as most of these tweaks have been used on many other devices and incorporated into various ROMs. But don't hold me to it. All I can say is make a backup, flash, and see. Report back to me with your findings please?

Ravers 3.0 version says removed ind.t, can i still flash this or could that cause complications?

thomas.raines said:
I would say yes as most of these tweaks have been used on many other devices and incorporated into various ROMs. But don't hold me to it. All I can say is make a backup, flash, and see. Report back to me with your findings please?
Click to expand...
Click to collapse
Got the " installation aborted " error message, will push it manually through Root Explorer. Will report back later today to let you know what the results are

mikhail777 said:
Ravers 3.0 version says removed ind.t, can i still flash this or could that cause complications?
Click to expand...
Click to collapse
IDK, I haven't tried yet. I am about to start working on that and try to add lockscreens. I will also try flashing this and we will see...

[Kernel] ardatdat kernel v1.8.3 [CWM] (2012-07-22) ** NEW RELEASE **

Dear all,
The v1.8.3 kernel is ready!
Special thanks to Adi_Pat for the ram hack coding!
So, if you are worry that this kernel will brick your machine or not stable, you are suggested not to flash this kernel. And if you have flashed it, you can always go back to previous kernel.
v1.8.2 is a private beta, in order to avoid confusion, I mark up the public release version to v1.8.3.
The major updates are listed below:
v1.8.3 (based on newest ZSLE6 kernel source)
==================================
- Support for all ROMs (including ZSKK5, ZSLE6, etc...)
- Available RAM increases to 853MB (increased by 129MB when comparing with stock)
- This kernel can support OC to 1320Mhz. By default, it is not OC, you need to OC using software like SetCPU
- Touch panel revert back to 5 points multi-touch as it is more stable
- Support EFS auto backup! EFS is auto backup to /data/.ardatdat/
- TCP/IP & SD Card tweaks are applied
- All features of v1.8.1 are kept, including Voodoo sound enhancements, auto-brightness control and etc
Please kindly download the kernel below and flash through CWM recovery:
File: ardatdat-9103-kernel-v1.8.3-1.32G(136-8-8).zip
Link: http://www.mediafire.com/?1iq7x046yxno24x
Mirror: http://115.com/file/e75txw3m#ardatdat-9103-kernel-v1.8.3-1.32G(136-8-8).zip
MD5: 00361D7AD9548ED3CFD0D6E03C22D537
v1.7 could be found there:
http://forum.xda-developers.com/showthread.php?t=1633345
v1.8.1 could be found there:
http://forum.xda-developers.com/showthread.php?t=1736389
Finally, flash at your own risk! Please feed back how you feel and don't hesitate to give me a 'thank' & donations if the kernel works great for you
Best Regards,
ardatdat

reserved...

I hit the first thank
Thanks a lot buddy for all ur efforts. Now as the cm devlopment already started for our device. Y don't u join epsy, adam77 and work for making cm better. u r one of the best devs for sgr and currently our one and only kernel expert ur help is appreciated to make cm better.
| Galaxy R | CM7 Nightlie 18 July | XWLA4 |
This was sent from Tapatalk 2.

Thanks for the new version, but please consider adding HOTPLUG to the next one so that the battery will last even longer.

Thanks alot..
Downloading ASAP..
If you can, please help Epsy,Adam to port CM Dude. You are one of the finest devs here.

dragosh01x said:
Thanks for the new version, but please consider adding HOTPLUG to the next one so that the battery will last even longer.
Click to expand...
Click to collapse
Any source codes for reference? Thanks.

For HOTPLUG, check TITANIUM kernel.
If you're also interested in GPU OC check CRANIUM kernel.
And I was just wondering; there is a guy on Antutu Benchmark that has Android 2.3.7 - 1920 MHz - 4841 (score). How's that possible ?

downloading!! huhuh..
yeah very much appreciate if CM release for this device. and your help would be greater in the development.

Thank man.... Great job...
You are truly awesome.....
The other features that can be from CRANIUM kernel.... Can u kindly add a moderate cpu clock like 1200 or 1150....
downloaded... And, will see.... How greatly it performs like all your other older kernels.....
Sent from my GT-I9103

Wuhuuu flashed right now
Sent from my Big R 6363Antutu

If I flash this, my ram increases. Now if I go back to 1.8.1, I get the same 724 mb ram and rest again gets allocated to graphics, right?
Btw thanks for your work
ICS = I SEE ASS Lol
Sent from my GALAXY R using XDA

Been awesome. Battery life is great for past 8 hrs.
Just one suggestion dude, Please add an intermediate freq between 1000 and 1320. Like 1160/1200 So that we can get best of both Worlds(Improved Battery life + OC)

F3niX said:
Been awesome. Battery life is great for past 8 hrs.
Just one suggestion dude, Please add an intermediate freq between 1000 and 1320. Like 1160/1200 So that we can get best of both Worlds(Improved Battery life + OC)
Click to expand...
Click to collapse
Agreed.......
Sent from my GT-I9103 using xda premium

Switched from CM to Neo ROM just for this....
Big games (like GTA 3 & 9 MM) are working fine, brightness is much better compared to your V 1.7 .....
Thank you Ardatdat for making such a good kernel :good:...

Can any one tell me what r tcp/ip tweaks, that ardat mention in op......???????
Sent from my GT-I9103 using xda premium

hey buddy, can we flash 1.8.3 kernels with XWLA4 2.3.6 version..??

kataria.vikesh said:
hey buddy, can we flash 1.8.3 kernels with XWLA4 2.3.6 version..??
Click to expand...
Click to collapse
Yup ardat clearly state that this in op kernel will work with all rom
Sent from my GT-I9103 using xda premium

gitanshu said:
If I flash this, my ram increases. Now if I go back to 1.8.1, I get the same 724 mb ram and rest again gets allocated to graphics, right?
Click to expand...
Click to collapse
ICS = I SEE ASS Lol
Sent from my GALAXY R using XDA

how to download mediafire things on smartphone?
Sent from my GT-I9103 using xda premium

gitanshu said:
If I flash this, my ram increases. Now if I go back to 1.8.1, I get the same 724 mb ram and rest again gets allocated to graphics, right?
Btw thanks for your work
ICS = I SEE ASS Lol
Sent from my GALAXY R using XDA
Click to expand...
Click to collapse
Yes RAM gets allocated according to the kernel version you flash. So if 1.8.1 did not have RAM hack GPU would get the default allocation and you'll get 724MB free RAM.
After flashing 1.8.1 check the Task Man what you see there is what you get.
Hope this helps.
Birki96 said:
how to download mediafire things on smartphone?
Sent from my GT-I9103 using xda premium
Click to expand...
Click to collapse
Set the user agent of your mobile's browser as 'Desktop' then you can download data from mediafire.
Here's how to do it:
Change stock browser's user agent:
Type 'about:useragent' in the stock browser to select 'Desktop' from a list of user agents available.
You can find the other tricks here: http://forum.xda-developers.com/showthread.php?t=1583928
Hope this helps.

[KERNEL][ICS] MaZel Kernel v1.0 [BETA-2]

Hi Friends,
Was Roaming around all over Tamil nadu and with my Nikon taking precedence over mobile, was away from laptop for few weeks. Now am Back with a kernel. With JB development going in photon speed, it may luk odd with a development work in ICS. But for those who are still persisting in ICS, it may matter. It is still a beta version. It has only the features that are listed below. Planning to add more features soon.Test and let me know on Battery drain, Performance and Deep sleep.
Features:
Based on Samsung ICS Update 2 Source
eMMC brick bug disabled
Pre-rooted
Overclocked - Currently added 1.2 Ghz alone
RAM Hack - Thanks to Adi_Pat
Governors - Conservative, Interactive and Performance
Schedulers - Noop, Deadline and CFQ
BLN Support with liblights - Thanks to Adam77Root
Custom Boot Animation Supported
Few Ramdisk tweaks
Auto-brightness fix - Thanks to Ardatdat
Voodoo sound patch
Download - Dropbox
Features working on:
Intermediate frequencies for OC
Custom Voltage
Memory Management and Misc tweaks
Kernel Source - Github

reserved

Is this exclusive for mazel rom?
Or can we use this in stock ics?

Just flashed the kernel. For some reason unable to use WiFi. Not being detected. Initial reactions: pretty smooth. I'm on bb rom. Will test for a while and update.
Sent from my GT-I9103 using xda app-developers app

drarunmmc said:
Is this exclusive for mazel rom?
Or can we use this in stock ics?
Click to expand...
Click to collapse
it can be used on any ice based rom:screwy:
HIt tHnX iF i hElP u
Sent from my GALAXY RoYaL
---------- Post added at 07:40 AM ---------- Previous post was at 07:33 AM ----------
buddy I used ur kernel , but the battery life is terrible,
I think it is because of oc , I set it to 1ghz but for some reason it stays in 1.2ghz, I checked in CPU spy...
so my suggestion is to delete the oc because no one is using it
although with this kernel the phone runs very smooth and snappy
HIt tHnX iF i hElP u
Sent from my GALAXY RoYaL

Thank you selva for the effort buddy:beer: so
used the kernel for a while.
Pros
1. Deep sleep perfect
2. Zero game lag. Tried with Subway surfers
3. Silky smooth
Cons
1. WiFi not working/connecting even after wiping cache/dalvik.
As I don't have much 2g data left for this month reverting back to ardatdat beta 6.
Sent from my GT-I9103 using xda app-developers app

@amar I set the set cpu to 1ghz only and rebooted buddy. It did not go to 1.2
Sent from my GT-I9103 using xda app-developers app

I used rom toolbox before and now I use set CPU everything is fine now and I also try temple run no glitches whatsoever
btw Selva buddy can u release two kernels one with oc and the other without oc......
HIt tHnX iF i hElP u
Sent from my GALAXY RoYaL

amar1548 said:
buddy I used ur kernel , but the battery life is terrible,
I think it is because of oc , I set it to 1ghz but for some reason it stays in 1.2ghz, I checked in CPU spy...
so my suggestion is to delete the oc because no one is using it
although with this kernel the phone runs very smooth and snappy
Click to expand...
Click to collapse
amar1548 said:
I used rom toolbox before and now I use set CPU everything is fine now and I also try temple run no glitches whatsoever
btw Selva buddy can u release two kernels one with oc and the other without oc......
Click to expand...
Click to collapse
Battery Life, yes it may be terrible as its only beta version. Its not because of OC. Its because i have not included all the tweaks needed for battery life. Still its in testing stage. Reason for including OC and having only 1.2 ghz is to test whether its preventing the game lag. Generally when i OC with limits and intermediate ranges as 1.1, 1.2 and 1.3, mostly the mobile clock in 1.1 ghz and very rarely going to 1.2 ghz. So i skipped 1.1 and included only 1.2 ghz.. Just a testing.

Will you add BFQ scheduler at a later stage? I have good experience with that and have been using it since I moved permanently to CM.
Sent from my CM10-powered GT-I9103

Adam77Root said:
Will you add BFQ scheduler at a later stage? I have good experience with that and have been using it since I moved permanently to CM.
Sent from my CM10-powered GT-I9103
Click to expand...
Click to collapse
Have not thought about it. Will check on it once im done with other basic stuffs. Surely will get in touch with u when including the scheduler.

MaZel Kernel v1.0 Beta-2
MaZel Kernel Beta-2 has been uploaded in dropbox.
Features added:
Auto Brightness fix
Voodoo Sound patch
Few tweaks
Please test and let me know guys.

Regarding the annoying lags and freezes in ICS, could this kernel for the Galaxy Tab 2 10.1 be of any help : http://forum.xda-developers.com/show....php?t=1950052 ?

dragosh01x said:
Regarding the annoying lags and freezes in ICS, could this kernel for the Galaxy Tab 2 10.1 be of any help : http://forum.xda-developers.com/show....php?t=1950052 ?
Click to expand...
Click to collapse
Problem with the link u provided buddy...Returns 404....few users reported that with this kernel, they didn't get lags...You can try and let us know..

selva.simple said:
Problem with the link u provided buddy...Returns 404....few users reported that with this kernel, they didn't get lags...You can try and let us know..
Click to expand...
Click to collapse
Let's try again : http://forum.xda-developers.com/showthread.php?t=1950052 - it's a "fixed" kernel by codeworkx for the Galaxy Tab 2 10.1, my other device, which also had serious lags and freezes in ICS as our Galaxy R. Hope there is magic you can add from that to your kernel.

Ok now..included intermediate freq of 1100 and then the BFQ scheduler as suggested by Adam. Getting few compiler errors for BFQ. Will check it tomorrow.
And finally setup the environment for AOSP build. As Ubuntu 12.04 was not supporting all the branches to do AOSP build (though its gud for kernels), now setup a diff environment using 10.04. Will Start init/sync tomorrow.

Nice work buddy! You can spare a lot of upload bandwidth by adding a '.gitignore' file. It tells git to ignore the specified files so they will not be pushed. Get one (specified for kernels) here: https://github.com/Adam77Root/android_kernel_samsung_i9103/blob/jellybean/.gitignore

Adam77Root said:
Nice work buddy! You can spare a lot of upload bandwidth by adding a '.gitignore' file. It tells git to ignore the specified files so they will not be pushed. Get one (specified for kernels) here: https://github.com/Adam77Root/android_kernel_samsung_i9103/blob/jellybean/.gitignore
Click to expand...
Click to collapse
Thanks a lot buddy. I surely need tat because of my poor data bandwidth.

Testers needed for CM10 kernel
Friends,
Need some testers for a new CM10 kernel. I have not even tried it as im doing some testing with ICS kernel in my device. So those who are about to test, have a back-up and then test this kernel. No special features added yet. Just wanna check whether its boots-up in cm10.
Link - MaZel CM10 Kernel

Sooo...did you find anything useful in that blamesamsung kernel : http://forum.xda-developers.com/showthread.php?t=1950052 ?

CM10 small tweaks and RAM. Post your setups!

Hello!
Are you on cm10 or any cm10 based ROMs? Is your phone rather fast? I am on Jellybam v 4.1 and i've used it for some days now. (it's the longer I ever stayed with it) and I am planning to use it as my daily driver but after installing a few apps and so the phone gets very slow.
What performance improvents and configs that works are you guys using and does it speed it up? Maybe I am the only one feeling this though :angel: .
This can also be a thread with tweaks, improvements, benchmark posts etc.
Also, how can I increase my RAM with Swap? I know how to partition but not how to activate it.
Btw I can not flash another kernel as I am on wkparks v25a and if I do that I will end up in a recovery loop!
Thank You!

Well I myself am using the lagfix app from the play store on the latest cm 10 nightly. The app works and it's not placebo. The speed increase is most noticable in launching apps.
If anyone else tested the app please share your experience.
Sent from my LG-P920 using xda app-developers app

Here's a few of my settings:
On performance settings I changed CPU governor to hotplug, then I/O scheduler to CFQ then zRam to 26% and finally enabled kernel samepage merging.
All this on performance settings from CM10 I also can't flash other kernels because I'm using bernis dual-boot... anyway seems better on performance no freezes only battery drains a bit faster but I guess that's a cm problem.
Sent from my LG-P920 using xda app-developers app

Sv: CM10 small tweaks and RAM. Post your setups!
Well there is the problem with the fps locking at a point on cm10 based ROMs. Iblueminds 4.2 doesnt have that so I am going to flash that tonight
Sent from my 3D phone.

Guys if you want to flash another kernel or ROM on wkparks 1.25a you have to
1. Downgrade to a u-boot lower than 1.24 with fastboot
2. Go into recovery and flash your ROM/kernel
3. Flah the 1.25a with fastboot and it should boot up fine.
This way you won't end up in recovery loop
:good:

cK3n said:
Here's a few of my settings:
On performance settings I changed CPU governor to hotplug, then I/O scheduler to CFQ then zRam to 26% and finally enabled kernel samepage merging.
All this on performance settings from CM10 I also can't flash other kernels because I'm using bernis dual-boot... anyway seems better on performance no freezes only battery drains a bit faster but I guess that's a cm problem.
Sent from my LG-P920 using xda app-developers app
Click to expand...
Click to collapse
I use the same settings. As well i use the Bluekernel II from iBluemind and i downclocked the maximum frequency to 800mhz and the minimun to 196mhz for a better battery life. It's enough for my daily use without any lags and freezes, but i don't play games on the phone

Sv: CM10 small tweaks and RAM. Post your setups!
This is the best combination I think so far:
Odex system and framework. Create a 64mb swapfile on either the system or data partition and set swappiness to 85. This makes all my cm10 and cm10.1 roms smooth and fast. On stock cm kernel too.
Sent from my 3D phone.

| SCRIPT | Blazing Thunder[Jb/Ics/Gb] [ More Speed|| Much Less Lag]

I noticed that there are a lot of great tweaks out there for android phones, but most users cant find them because they're distributed all over XDA. So here i am, with a collection of those tweaks, in an All in one flashable zip. Merged some, modified some, add a lot. Its pretty much a universal tweak, it will work on every device.
And if your going to add this to your ROm, please let me know and add me to the credits!
How to's-
Install:
1. Boot into CWM
2. Wipe dalvik cache
3. Flash zip
4. Reboot
Do note that the ROM will take time to boot up, so don't go on doing something crazy like removing the battery.
Thunder Features:
-Cleaned up
-MUCH better Ram usage
-Cache Cleared at every boot
-SD speed tweak
-Logger removed
-Better browser performance
-Sysctl tweaks
-Added modified Zram script
-Better battery life
-Lag? GONE
-Faster GUI
-Loopy smoothness tweak
-Apps zipaligned at every boot
-Faster Networking
-Smoother LWP animation
-Adrenaline boost
-Kernel Tweaks
-Better gaming
Supported:-
All devices with init.d support
-All GB ROMs
-All ICS ROMs
-All JB ROMs
links-
script- www.4shared.com/zip/Tq_u3WXC/thunder_script.html
mediafire link- www.mediafire.com/?bbbokdpmozzpgms
Don't forget to press thanks.

Credits - Imbawind - Adrenaline
Emwno - Supremacy
Kurotsugi - Guidance
Me
Xda && You All !!

Has this been tested
linaro cm10.1
uber 1.1
like a rokc :thumbs up:

On Disaster ROM 11 (S2 sammy stock) doesn't work. Script doesn't install file. Need to copy them manully

You dont list a required things.
Does it required custom kernel etc?
This one seems similar to the theunderbolt tweaks. Whats the difference
Sent from my HTC Desire X using xda app-developers app

Sorry
Apolo kernel 4.6.
I tried others mod and they correct install files. This one no

w1040 said:
You dont list a required things.
Does it required custom kernel etc?
This one seems similar to the theunderbolt tweaks. Whats the difference
Sent from my HTC Desire X using xda app-developers app
Click to expand...
Click to collapse
Supports all roms gb/ics/jb with init.d support, you can read this in op.

Another "great" script which collected all kind of tweaks found somewhere in the web...

jader13254 said:
Another "great" script which collected all kind of tweaks found somewhere in the web...
Click to expand...
Click to collapse
Lmao your funny
linaro cm10.1
uber 1.1
like a rokc :thumbs up:

Diego910 said:
Supports all roms gb/ics/jb with init.d support, you can read this in op.
Click to expand...
Click to collapse
How to know if your rom supports init.d or not?
Im on stock ics rom and stock kernel rooted
Sent from my HTC Desire X using xda app-developers app

I flashed it, but there were no extra scripts in init.d folder afterwards is this correct?
Sent from my GT-I9070 using xda app-developers app

w1040 said:
How to know if your rom supports init.d or not?
Im on stock ics rom and stock kernel rooted
Sent from my HTC Desire X using xda app-developers app
Click to expand...
Click to collapse
All custom kernels have init.d. For stock kernels you can use pimp my rom, is the easiest way. Then you will have a folder called init.d in system/etc
Enviado desde mi ST25i usando Tapatalk 2

If I open downloaded zip it's impossible to open any file with text editor... I mean there is something wrong...

Wiped dalvik cache, flash aaaaaaannndd bootloop! Im waiting around 1hrs.
Sent from my HTC Explorer A310e using xda app-developers app

so far so good on captivate glide

how to uninstall this? Plz provide an uninstaller

Reflash your rom if you do not have the patience to wait for dev to provide an uninstaller script.
Sent from my GT-I9070 using xda app-developers app

jader13254 said:
Another "great" script which collected all kind of tweaks found somewhere in the web...
Click to expand...
Click to collapse
For me it's so far great.
Well thank you for your irrelevent comment. Did expected some frustations from people..
Lol

Can somebody provide a list of devices it was found working on ??

Works awesomely perfect on my LG Optimus V
Sent from my ZombieBean 4.2-VM670 using Xparent Holo Tapatalk 2