Related
i am now using creed's rom 1.5 and running in cmw based recovery v5.0.2.7
what rom can i use? i not familiar with flashing roms that have compatibility issues with other roms. please help me.
kinsenas said:
i am now using creed's rom 1.5 and running in cmw based recovery v5.0.2.7
what rom can i use? i not familiar with flashing roms that have compatibility issues with other roms. please help me.
Click to expand...
Click to collapse
try Razodroid, its soooo good, fast and smooth, or Creeds 1.7
sir what do i need to do for razoroid??? do i need to re flash my cwm????
kinsenas said:
sir what do i need to do for razoroid??? do i need to re flash my cwm????
Click to expand...
Click to collapse
no, just go to cwm -> wipe your data and cache, put razodroid.zip on sd and flash it via cwm(using the first option from zip from sd or something like that), once its installed i reccomend to wipe cache and data again ... its not hard, check the oficial post from razodroid, or wait Rishee its going to release the new version soon ... i hope
thank you so much sir!! btw, if i would like to flash creed's rom 1.7? i will do the same proceedure???
kinsenas said:
thank you so much sir!! btw, if i would like to flash creed's rom 1.7? i will do the same proceedure???
Click to expand...
Click to collapse
yes, almost all the new roms had the same proceedure thx to cwm
thanks for the help sir! i will try the razodroid now.
IMO, RazoDroid is the best
hey
yes lomash....thats right
razodroid is the best....V1 runs very fast and stable...
we are waiting for V2.2
thanx raj
cheers
Deshabilitado said:
try Razodroid, its soooo good, fast and smooth, or Creeds 1.7
Click to expand...
Click to collapse
the Razodroid is a OC rom??
ya if you flash the OC kernel
I've been searching here for a long time and looking at different custom ROMs but cannot find an answer. (so please be gentle on me if I missed the obvious...)
Is there a custom ROM for the TF101 which is not affected by the RR, SOD, bootloop, and all the other issues introduced in stock ICS?
Will appreciate the advice.
yud said:
I've been searching here for a long time and looking at different custom ROMs but cannot find an answer. (so please be gentle on me if I missed the obvious...)
Is there a custom ROM for the TF101 which is not affected by the RR, SOD, bootloop, and all the other issues introduced in stock ICS?
Will appreciate the advice.
Click to expand...
Click to collapse
I have used android revolution hd since it updated to ICS and not since the first ICS ota version have I seen a random reboot and I have never had a SOD
Get a new kernel
Your solution to SODs and ROR is getting a new kernel, the best one is to my point of view GUEVOR works, the last ones are great with stock rom.
werewolferx said:
Your solution to SODs and ROR is getting a new kernel, the best one is to my point of view GUEVOR works, the last ones are great with stock rom.
Click to expand...
Click to collapse
This is what you need to do. But, I would recommend either the 17c or 16b. I had a lot of SOD with the latest 19.2 kernel.
Thank you all!
I'm currently on stock .21
So confirming that what I need to do is:
Revert to an older, rootable stock ROM
Root
Then either:
Install Guevor kernel (with stock rom?)
or
Install Revoultion HD
Is this correct?
Yes, Guevor 17c is rock stable, so is the TestyMehIcs kernel. Both should do you good
ARHD on it's own (as mike tweaks the kernel) or with Guevor/testymeh is good too.
Thing O Doom said:
Yes, Guevor 17c is rock stable, so is the TestyMehIcs kernel. Both should do you good
ARHD on it's own (as mike tweaks the kernel) or with Guevor/testymeh is good too.
Click to expand...
Click to collapse
Thanks @Thing O Doom.
And is the procedure above correct?
Yes, between steps 2 and 3 though you need to make sure to install CWM recovery (I recommend Rouge XM version, as it reads internal and external SD card) this is what you will use to flash the kernel and a ROM
Thing O Doom said:
Yes, between steps 2 and 3 though you need to make sure to install CWM recovery (I recommend Rouge XM version, as it reads internal and external SD card) this is what you will use to flash the kernel and a ROM
Click to expand...
Click to collapse
Thanks Thing O Doom.
Yes, I forgot to mention CWM...
Will try the stock .24 when it comes out (hopefully this weekend) and if RR continues I will go Revolution HD or guevor.
Hi,
I have installed Matr1x kernel. I am using Stock ICS Rom only. Will the New Jelly Bean Update.zip work.
Can i install using cwm.
Please advise me.
Regards,
asdf2020
It should flash through CWM, but keep in mind it'll overwrite your recovery and replace your kernel.
chronophase1 said:
It should flash through CWM, but keep in mind it'll overwrite your recovery and replace your kernel.
Click to expand...
Click to collapse
Thanks for reply.
Does it will wipe my data/apps as well?
No. Everything will be the same. I flashed over ICS and everything was kept the same for me
chronophase1 said:
No. Everything will be the same. I flashed over ICS and everything was kept the same for me
Click to expand...
Click to collapse
has your kernel been replaced??? or is it the same ??
For ****s-and-giggles, I threw the matr1x kernel on top of my 4.1.1 ota last night ... It didn't work.
asdf2020 said:
has your kernel been replaced??? or is it the same ??
Click to expand...
Click to collapse
Yea. My app settings stayed the same, but like I said, my kernel got replaced, which is expected. I don't use matrix though and seeing as the kernel sources vary, chances of it working are pretty slim, as seen above.
asdf2020 said:
Hi,
I have installed Matr1x kernel. I am using Stock ICS Rom only. Will the New Jelly Bean Update.zip work.
Can i install using cwm.
Please advise me.
Regards,
asdf2020
Click to expand...
Click to collapse
Your kernel will get replaced. I wouldn't recommend it because I've tried other kernels with the official OTA JB ROM and the experience wasn't as smooth. I have yet to try Matr1x kernel yet though.
No different versión of Ndroid not supported at least yet ;D
Lets just say hes workin on it i would expect
So......official JB 4.1 won't work on my Matr1x kernel
Hello xda forums, I've done a lot of research and I can't find anything conclusive about this issue...
How do I flash a new kernel on my asus tf300t with custom rom cm10.1 nightlies? I want to do this because I can't overclock over 1.3 ghz .
I'm really happy with this rom on performence mode , but in heavier games like gta vice city it still lags a lot, so I'm guessing higher freq > better gamming experience. Please help this poor child :'( . And if I'm reposting or something, u have my sincere apologies.
Thank u so much for the help and I hope this post can help as many as possible.
Are you able to reboot into recovery mode? (Hold power, press reboot and select recovery)
If you can, just download the custom kernel .zip file and go back to recovery. Select 'install zip from sdcard', browse to and select the downloaded kernel.. reboot and enjoy
Sent from my LT18i
I use Cyanogenmod 10.1, CM's kernel is so good. Problem is in I/O. If you don't want to your apps lagging, you will have to move your apps to MicroSD class 10
zaki0saad said:
Are you able to reboot into recovery mode? (Hold power, press reboot and select recovery)
If you can, just download the custom kernel .zip file and go back to recovery. Select 'install zip from sdcard', browse to and select the downloaded kernel.. reboott from my LT18i
Click to expand...
Click to collapse
Hey man, my tablet is rooted and I have cwm recovery installed, so i can boot up the tablet and acess the cwm menu via powerbtn+vol down.
So yes I can flash roms and kernels, but now I ask?? Can I install any kernel having already cm10.1 installed?? If not please give me a list of safe kernels i can install changing cm10.1 kernel on my tf300t.
If this method is to risky maybe I should install other rom with higher costumable overcklock? If yes please recommend roms with overclock ranges higher than 1.3 ghz.
Thank u for ur help
absinto10 said:
Hey man, my tablet is rooted and I have cwm recovery installed, so i can boot up the tablet and acess the cwm menu via powerbtn+vol down.
So yes I can flash roms and kernels, but now I ask?? Can I install any kernel having already cm10.1 installed?? If not please give me a list of safe kernels i can install changing cm10.1 kernel on my tf300t.
If this method is to risky maybe I should install other rom with higher costumable overcklock? If yes please recommend roms with overclock ranges higher than 1.3 ghz.
Thank u for ur help
Click to expand...
Click to collapse
I think there is only one kernel for CM10.1 that you can safely flash and that is Surdu's kernel, what you need to do is get your CM10 zip file and open it with 7zip and then replace the kernel .blob file inside with the one you want to flash, close the zip and reflash your ROM, only wipe cache/dalvik and you should have a new kernel.
Another option is to try Surdu's CM10.1 build with its own kernel, that what I have and it runs great.
hope that helps.
Erik
ricco333 said:
I think there is only one kernel for CM10.1 that you can safely flash and that is Surdu's kernel, what you need to do is get your CM10 zip file and open it with 7zip and then replace the kernel .blob file inside with the one you want to flash, close the zip and reflash your ROM, only wipe cache/dalvik and you should have a new kernel.
Another option is to try Surdu's CM10.1 build with its own kernel, that what I have and it runs great.
hope that helps.
Erik
Click to expand...
Click to collapse
Hey man thank u so much . Just to be sure, so i download the leatest cm10.1.zip extract, change the blob kernel of cm10.1 with surdu's kernel, zip again, flash > wipe cache and dalvik and it is done?
Is it really safe? And after this change can i go higher then 1.3 ghz?
Sorry for being annoying but I just want to be sure.
Thank u so much
absinto10 said:
Hey man thank u so much . Just to be sure, so i download the leatest cm10.1.zip extract, change the blob kernel of cm10.1 with surdu's kernel, zip again, flash > wipe cache and dalvik and it is done?
Is it really safe? And after this change can i go higher then 1.3 ghz?
Sorry for being annoying but I just want to be sure.
Thank u so much
Click to expand...
Click to collapse
Yep, just like that, all you are doing is replacing the CM10 kernel with a compatible one. and yes Surdu's CM10.1 kernel has GPU overclock and also CPU overclock to 1.7ghz.
Erik
ricco333 said:
Yep, just like that, all you are doing is replacing the CM10 kernel with a compatible one. and yes Surdu's CM10.1 kernel has GPU overclock and also CPU overclock to 1.7ghz.
Erik
Click to expand...
Click to collapse
Thank u so much man. So just replacing the blob didn't really work so I had to install Surdo's cm10.1 over my installed rom(cm10.1 too)>then wipe dalvik + cache and voila
Now I can overclock to 1.7 ghz
Source of Surdo's cm10.1 oc to 1.7 ghz for tf300t: http://forum.xda-developers.com/showthread.php?t=2112369
Thank u once again and hope this post can help others with the same issue
Perf Kernel in the dev setion works GREAT on CM10.1 4.2.2 builds. Tunable with franco.Kernel Updated app :good: GPU settings on the fly, mine's set @ 512. The tablet oozes butter, it's that smooth
Ti2 said:
Perf Kernel in the dev setion works GREAT on CM10.1 4.2.2 builds. Table with franco.Kernel Updated app :good: GPU settings on the fly, mine's set @ 512. The tabt oozes butter, it's that smooth
Click to expand...
Click to collapse
Hello man, so i finally figure it out, how to use perf kernel in cm10.1, and OMG it's so freaking amazing I've tunned up my cpu speed between 200 mhz and 1600 mhz in interactive mode, when gamming I use performance mode up 1.7ghz and 706 mhz gpu... Well I hope I'm not pushing to much of little tf300t xD
Thank u so much Ti2.
Ps. I use trickster insted of f.kernel app... Works really good too
You want to clock down good GPU a tad, I think 706 is really pushing it. Stock is ~440, standard Perf setting is 600.
Ti2 said:
You want to clock down good GPU a tad, I think 706 is really pushing it. Stock is ~440, standard Perf setting is 600.
Click to expand...
Click to collapse
Yeah you are probably right. Gpu with 706 oc it's to much and very unstable. When I play heavy games like Vice city and nova 3, the best settings I've found were 1.7ghz performance mode and gpu with standart perf settings(600mhz). So if u want a stable gamming experience on the tf300t, I would recommend this settings.
help?
Hello. I've flashed CM 10.1 and perf kernel and it oc my cpu to 1.7, which is good' but I can't find where to oc my gpu, can you help me?
Hi can anyone help me in installing cwm recovery in c2104 without flashing thunderzap, phantom or any other kernel?
My device is entirely rooted with an unlocked bootloader _
I don't know if this will work, but search xparts in the play store, it is an app for flashing xperia recoveries. Idk if it supports L though. But worth a try. Or just download a recovery from ROM manager. Also found in the play store.
Sent from my ST18i
Nothing different between flashing kernels or installing recovery. Flashing kernel is way easier and faster so I would just flash this instead going around and bothering with recovery instalation.
http://forum.xda-developers.com/showthread.php?t=2321550
flameonfzn said:
Hi can anyone help me in installing cwm recovery in c2104 without flashing thunderzap, phantom or any other kernel?
My device is entirely rooted with an unlocked bootloader _
Click to expand...
Click to collapse
Recovery is intergrated in the kernel (boot.img) on Xperia devices.
Joery360 said:
Recovery is intergrated in the kernel (boot.img) on Xperia devices.
Click to expand...
Click to collapse
Thank you replying, actually i wanted to flash a couple of tweaks by using cwm_but it looks like now i really have to install a kernel_i have tried both phantom and thunderzap kernels before, phantom was laggy, and games were taking a lot of time in loading on the other hand thunderzap was pretty good but it consumed a lot of battery even when i was using the max frquency at 1ghz only_can you suggest me which kernel to install then, and if it is thunderzap what should be the cpu configuration?
flameonfzn said:
Thank you replying, actually i wanted to flash a couple of tweaks by using cwm_but it looks like now i really have to install a kernel_i have tried both phantom and thunderzap kernels before, phantom was laggy, and games were taking a lot of time in loading on the other hand thunderzap was pretty good but it consumed a lot of battery even when i was using the max frquency at 1ghz only_can you suggest me which kernel to install then, and if it is thunderzap what should be the cpu configuration?
Click to expand...
Click to collapse
I'm using Extended Stock kernel by @Rachit Rawat
It's pretty solid, games like GTA SA & Minecraft run smooth.
I didn't overclock my phone, only debloated & rooted
Recovery without custom kernel
flameonfzn said:
Hi can anyone help me in installing cwm recovery in c2104 without flashing thunderzap, phantom or any other kernel?
My device is entirely rooted with an unlocked bootloader _
Click to expand...
Click to collapse
Here you go
http://forum.xda-developers.com/showthread.php?t=2589320
The correct answer for your question
Enjoy
Hit Thanks if it helped you :good:
Joery360 said:
I'm using Extended Stock kernel by @Rachit Rawat
It's pretty solid, games like GTA SA & Minecraft run smooth.
I didn't overclock my phone, only debloated & rooted
Click to expand...
Click to collapse
Thank you so much man, this is just what i was looking for_
Redzo said:
Nothing different between flashing kernels or installing recovery. Flashing kernel is way easier and faster so I would just flash this instead going around and bothering with recovery instalation.
http://forum.xda-developers.com/showthread.php?t=2321550
Click to expand...
Click to collapse
There are HUGE differences between flashing custom Kernels and installing Recoveries Do make some research before giving others a false info :victory:
Bhupi7411 said:
Here you go
http://forum.xda-developers.com/showthread.php?t=2589320
The correct answer for your question
Enjoy
Hit Thanks if it helped you :good:
Click to expand...
Click to collapse
How to connect phone to use this installer? I've searched forum and G. I'm stuck at "Step 1: Waiting for Device..."