Hi can anyone help me in installing cwm recovery in c2104 without flashing thunderzap, phantom or any other kernel?
My device is entirely rooted with an unlocked bootloader _
I don't know if this will work, but search xparts in the play store, it is an app for flashing xperia recoveries. Idk if it supports L though. But worth a try. Or just download a recovery from ROM manager. Also found in the play store.
Sent from my ST18i
Nothing different between flashing kernels or installing recovery. Flashing kernel is way easier and faster so I would just flash this instead going around and bothering with recovery instalation.
http://forum.xda-developers.com/showthread.php?t=2321550
flameonfzn said:
Hi can anyone help me in installing cwm recovery in c2104 without flashing thunderzap, phantom or any other kernel?
My device is entirely rooted with an unlocked bootloader _
Click to expand...
Click to collapse
Recovery is intergrated in the kernel (boot.img) on Xperia devices.
Joery360 said:
Recovery is intergrated in the kernel (boot.img) on Xperia devices.
Click to expand...
Click to collapse
Thank you replying, actually i wanted to flash a couple of tweaks by using cwm_but it looks like now i really have to install a kernel_i have tried both phantom and thunderzap kernels before, phantom was laggy, and games were taking a lot of time in loading on the other hand thunderzap was pretty good but it consumed a lot of battery even when i was using the max frquency at 1ghz only_can you suggest me which kernel to install then, and if it is thunderzap what should be the cpu configuration?
flameonfzn said:
Thank you replying, actually i wanted to flash a couple of tweaks by using cwm_but it looks like now i really have to install a kernel_i have tried both phantom and thunderzap kernels before, phantom was laggy, and games were taking a lot of time in loading on the other hand thunderzap was pretty good but it consumed a lot of battery even when i was using the max frquency at 1ghz only_can you suggest me which kernel to install then, and if it is thunderzap what should be the cpu configuration?
Click to expand...
Click to collapse
I'm using Extended Stock kernel by @Rachit Rawat
It's pretty solid, games like GTA SA & Minecraft run smooth.
I didn't overclock my phone, only debloated & rooted
Recovery without custom kernel
flameonfzn said:
Hi can anyone help me in installing cwm recovery in c2104 without flashing thunderzap, phantom or any other kernel?
My device is entirely rooted with an unlocked bootloader _
Click to expand...
Click to collapse
Here you go
http://forum.xda-developers.com/showthread.php?t=2589320
The correct answer for your question
Enjoy
Hit Thanks if it helped you :good:
Joery360 said:
I'm using Extended Stock kernel by @Rachit Rawat
It's pretty solid, games like GTA SA & Minecraft run smooth.
I didn't overclock my phone, only debloated & rooted
Click to expand...
Click to collapse
Thank you so much man, this is just what i was looking for_
Redzo said:
Nothing different between flashing kernels or installing recovery. Flashing kernel is way easier and faster so I would just flash this instead going around and bothering with recovery instalation.
http://forum.xda-developers.com/showthread.php?t=2321550
Click to expand...
Click to collapse
There are HUGE differences between flashing custom Kernels and installing Recoveries Do make some research before giving others a false info :victory:
Bhupi7411 said:
Here you go
http://forum.xda-developers.com/showthread.php?t=2589320
The correct answer for your question
Enjoy
Hit Thanks if it helped you :good:
Click to expand...
Click to collapse
How to connect phone to use this installer? I've searched forum and G. I'm stuck at "Step 1: Waiting for Device..."
Related
I have search in this forum and googling it about my problem [ not big problem actually ], but not yet found proper thread or answer.
After flashing ROM version V5.2 and try to boot from recovery, i got my button key now blinking while booting.
But after booting complete is normal.
Currently use V5.2 with baseband 18A, and it works normal in my O3D device.
Button is also working normal, except search and back button is mixed function.
Do you guys ever has similar blinking led? is it absolutelly normal,
or just i have not yet found some issues in my device...
thank you for any feedback ( if there is any link for fixing search/back button improvement, it'll be better )..
mine is blinking too while booting, think it is normal.
if you want normal buttons, you should install a kernel with 4 button support. then back and search isn't switched.
blinking = normal
4 keys fix: flash this Kernel but read the Instructions carefully!!
ps you dont have to use exactly that kernel but its the one i use/like
Sent from my LG-SU760 using xda premium
thanks to both of you guys...
if blinking is normal then i'll not mind about it..
and for link about kernel, i'll go and start to read it..
thanks for link..
TMProduct1onZ said:
blinking = normal
4 keys fix: flash this Kernel but read the Instructions carefully!!
ps you dont have to use exactly that kernel but its the one i use/like
Sent from my LG-SU760 using xda premium
Click to expand...
Click to collapse
Sorry to bump up on little bit dumb question i am about to ask but, Whats the Kernel do to your phone? what is it? why i need it?
maybe need for unlock (flash) the bootloader...
bensmokie said:
Sorry to bump up on little bit dumb question i am about to ask but, Whats the Kernel do to your phone? what is it? why i need it?
Click to expand...
Click to collapse
“… the kernel is the main component of most computer operating systems; it is a bridge between applications and the actual data processing done at the hardware level.”
Read more about it Here
Sent from my P920 using XBSA ICS V5
TMProduct1onZ said:
“… the kernel is the main component of most computer operating systems; it is a bridge between applications and the actual data processing done at the hardware level.”
Read more about it Here
Sent from my P920 using XBSA ICS V5
Click to expand...
Click to collapse
Thanks a lot mate.as i as i understood i can flash only the kernel right? or it does have to be with the ICS. i mean like the ICS V5 of Xbsall has kernel 3.0.1 on it, isn't it? but i think it doesn't the over clock ....
bensmokie said:
Thanks a lot mate.as i as i understood i can flash only the kernel right? or it does have to be with the ICS. i mean like the ICS V5 of Xbsall has kernel 3.0.1 on it, isn't it? but i think it doesn't the over clock ....
Click to expand...
Click to collapse
You are already on ICS, so you can flash only the kernel.
schubeir
schubeir said:
You are already on ICS, so you can flash only the kernel.
schubeir
Click to expand...
Click to collapse
Thanks , Can you please advise me for a great kernel....
bensmokie said:
Thanks , Can you please advise me for a great kernel....
Click to expand...
Click to collapse
My favorite: Kernel
or this one: Kernel
Sent from my P920 using XBSA ICS V5
TMProduct1onZ said:
My favorite: Kernel
or this one: Kernel
Sent from my P920 using XBSA ICS V5
Click to expand...
Click to collapse
It says here that i have to flash wkparks Modified Bootloaders From Here > http://forum.xda-developers.com/show....php?t=1971014
Flashed Dexter_nlb's Recovery, Either TWRP Or CWM (I Use CWM) From Here > http://forum.xda-developers.com/show....php?t=1978543
as far as understand we already those done steps in order to get rooted , because without them my Ics will not rooted correct me if i am wrong but in order to get your device rooted you have to flash them both ain't that right? i mean you have flash Dexter_nlb's Recovery and wkparks Modified Bootloaders to root your ics right?
bensmokie said:
It says here that i have to flash wkparks Modified Bootloaders From Here > http://forum.xda-developers.com/show....php?t=1971014
Flashed Dexter_nlb's Recovery, Either TWRP Or CWM (I Use CWM) From Here > http://forum.xda-developers.com/show....php?t=1978543
as far as understand we already those done steps in order to get rooted , because without them my Ics will not rooted correct me if i am wrong but in order to get your device rooted you have to flash them both ain't that right? i mean you have flash Dexter_nlb's Recovery and wkparks Modified Bootloaders to root your ics right?
Click to expand...
Click to collapse
i didnt flash dexters recovery to root my phone :/
however, if you flashed dexters recovery then you have everything you need and you can flash a custom kernel
Sent from my P920 using XBSA ICS V5
TMProduct1onZ said:
i didnt flash dexters recovery to root my phone :/
however, if you flashed dexters recovery then you have everything you need and you can flash a custom kernel
Sent from my P920 using XBSA ICS V5
Click to expand...
Click to collapse
Well i flashed it but nothing change my Kernel still the same 3.0.21 as it was.maybe i didn't wipe cashe or something.
I flashed Dexters recovery in order to get TWRP work on my phone.
bensmokie said:
Well i flashed it but nothing change my Kernel still the same 3.0.21 as it was.maybe i didn't wipe cashe or something.
I flashed Dexters recovery in order to get TWRP work on my phone.
Click to expand...
Click to collapse
If the flash process had no errors then you successfully flashed a custom kernel all custom kernels for ics are 3.0.21 but with some tweaks and mods
Sometimes devs change kernel version to say something else, but not always...
Download No-Frills CPU to see what your min/max frequencies are
Sent from my P920 using XBSA ICS V5
TMProduct1onZ said:
If the flash process had no errors then you successfully flashed a custom kernel all custom kernels for ics are 3.0.21 but with some tweaks and mods
Sometimes devs change kernel version to say something else, but not always...
Download No-Frills CPU to see what your min/max frequencies are
Sent from my P920 using XBSA ICS V5
Click to expand...
Click to collapse
Here is mine,
mine gives me possibility to 1.3GHz on Max and Min clock Freq, will it harm my device if i move to 1.3GHz all of it? because i changed it to 1.3 GHz to both of them at Max and min...
bensmokie said:
Here is mine,
mine gives me possibility to 1.3GHz on Max and Min clock Freq, will it harm my device if i move to 1.3GHz all of it? because i changed it to 1.3 GHz to both of them at Max and min...
Click to expand...
Click to collapse
i guess you flashed iodaks kernel..
No it wont really harm your phone but it will drain more battery.
And its not really smart to keep the min @1,3ghz.. make it min 300mhz and max 1,3ghz iodak made his kernel so, that it raise to max freq. every time you touch the display, so theres no need to make min freq 1,3ghz.
Edit: oh and choose for governor Hotplug and for i/o sheduler sio (best combination if you ask me..)
Sent from my P920 using XBSA ICS V5
Thanks a lot mate you been help full I can feel my phone really speeding up now.
Once again thank u
Sent from my LG-SU760 using xda app-developers app
bensmokie said:
Thanks a lot mate you been help full I can feel my phone really speeding up now.
Once again thank u
Sent from my LG-SU760 using xda app-developers app
Click to expand...
Click to collapse
Glad i could help :good:
have fun!
Sent from my P920 using XBSA ICS V5
hi bensmokie , TMProduct1onZ..
as in my 1st post, i've xbsall ICS now..
and read many post for fixing 4-keys (changing kernel )..
by yesterday, i found this tools... here
my question is :
1. can i use it directly to flash kernel to fix 4 keys? the kernel is based on iodak's kernel.
2. i've read iodaks kernel zipped format. but it should need to install wkpark bootloader
3. i can boot into recovery mode, could i install iodak zipped kernel directly from recovery mode, without doing #2 step?
thanks..
I'm planning to buy Xperia L sometime later, I was just wondering some ROMs here do not require CWM to install? Like Clean and Tweaked
Oh and will Vengeance Kernel work with clean and tweaked ROM thanks alot!
Guys please help
Racer X said:
I'm planning to buy Xperia L sometime later, I was just wondering some ROMs here do not require CWM to install? Like Clean and Tweaked
Oh and will Vengeance Kernel work with clean and tweaked ROM thanks alot!
Click to expand...
Click to collapse
As of now Rom's need to be installed via PC and not ClockWorkMod ...
And Yes, the Vengeance Kernel should work on both Rom's since currently all the Kernels as well as Roms are completely based on STOCK .
Hope that clears your doubts .
Hello,
What is the currently (max) overclock speed for our device?
Also, which ROM do you recommend for high performance? (visible difference in a benchmark test).
sunniebeta said:
Hello,
What is the currently (max) overclock speed for our device?
Also, which ROM do you recommend for high performance? (visible difference in a benchmark test).
Click to expand...
Click to collapse
It's 1.4 GHz but I think that won't be good for the processor.
Sent from my GT-N7100 using XDA Premium 4 mobile app
I think there is(Or used to be) kernel, wich supports oc up to 1,5ghz, but i am not sure.
i9105p
I think its 1.3 GHz. My i9105p works fast.
Its 1568Mhz with k2wl's kernel
rs tony said:
Its 1568Mhz with k2wl's kernel
Click to expand...
Click to collapse
Which firmware do you use?
rs tony said:
Its 1568Mhz with k2wl's kernel
Click to expand...
Click to collapse
I tried that kernel now with the stockrom, 4.2.2.
But my phone got in a bootloop.
Do you have this too?
sunniebeta said:
I tried that kernel now with the stockrom, 4.2.2.
But my phone got in a bootloop.
Do you have this too?
Click to expand...
Click to collapse
Yep :good: that's why i'm asking @rs tony which firmwares is he using....
If you don't know how to fix your phone:
1.flash stock rom
2.factory reset and wipe cache partitition(stock recovery)
Yes because it's for 4.1.2 ...
DenisRonaldo798 said:
Yep :good: that's why i'm asking @rs tony which firmwares is he using....
If you don't know how to fix your phone:
1.flash stock rom
2.factory reset and wipe cache partitition(stock recovery)
Click to expand...
Click to collapse
Sorry expectation of an answer to question. I'm at school
Yes, its for 4.1.2.
DenisRonaldo798 said:
Yep :good: that's why i'm asking @rs tony which firmwares is he using....
If you don't know how to fix your phone:
1.flash stock rom
2.factory reset and wipe cache partitition(stock recovery)
Click to expand...
Click to collapse
I was still able to reach CWM, so I just flashed a custom ROM.
Most of the times I flash at school, so I don't have access to ODIN there.
1400 is the best for me
the normal S2 has 1.8 GHz, i think the more safe overclock for our device is in CM11 with 1.3Ghz
kernel link
wott 1,5, could someone provide link to that kernel???would it wor on cm11 resurrection rom???thanks
SH1M4BD3 said:
wott 1,5, could someone provide link to that kernel???would it wor on cm11 resurrection rom???thanks
Click to expand...
Click to collapse
1,5 is only for 4.1.2 stock, so don't even try flash that ur custom rom
well our phone have dual core proccessor, so it can be overclocked to 1400 and more, but for me, there is no much difference btw mhzs..
Is he also got involved in our devices kernel project too??
Sent from my GT-I9105P
Hello. I'd like to install Faux123 kernel in my moto G but I don't have clear how I should install it . I have found the app on the play store Faux123 Kernel Enhancement Pro. Should I have to install it to get work it properly?
mazzy89 said:
Hello. I'd like to install Faux123 kernel in my moto G but I don't have clear how I should install it . I have found the app on the play store Faux123 Kernel Enhancement Pro. Should I have to install it to get work it properly?
Click to expand...
Click to collapse
You dont need the app to use the kernel, but you need to have an unlocked bootloader, a custom recovery (maybe also a rooted phone).
ItzzAce said:
You dont need the app to use the kernel, but you need to have an unlocked bootloader, a custom recovery (maybe also a rooted phone).
Click to expand...
Click to collapse
Ok I understood how to install correctly faux123 kernel. but what should I do if I want to come back to the original kernel?
mazzy89 said:
Ok I understood how to install correctly faux123 kernel. but what should I do if I want to come back to the original kernel?
Click to expand...
Click to collapse
Before installing faux kernel do a nandroid backup in recovery. If you're unsatisfied with faux kernel then restore your backup.
Sent from my XT1033 using Tapatalk
rajibie said:
Before installing faux kernel do a nandroid backup in recovery. If you're unsatisfied with faux kernel then restore your backup.
Sent from my XT1033 using Tapatalk
Click to expand...
Click to collapse
Thank you very much :laugh:
If you want the stock xt1032 kernel send me a pm and I'll send you a link
Sent from my XT1032 using XDA Free mobile app
rajibie said:
Before installing faux kernel do a nandroid backup in recovery. If you're unsatisfied with faux kernel then restore your backup.
Sent from my XT1033 using Tapatalk
Click to expand...
Click to collapse
do you loose data when installing a custom kernel? what are the advantages of this kernel? I am enjoying the stock rom and want to stick with it, but don't know what I'm missing if I switch the kernel to Faux123. Already UL and rooted
3RAN7ON said:
do you loose data when installing a custom kernel? what are the advantages of this kernel? I am enjoying the stock rom and want to stick with it, but don't know what I'm missing if I switch the kernel to Faux123. Already UL and rooted
Click to expand...
Click to collapse
No, you will not loose your data when flashing a new kernel.
Long story short, the advantages are a much more effecient and optimised kernel that will allow for better performance, battery life or a balance between the two depending on what your after and how you setup the kernel... Read, read and when you think you've read enough, read somemore!
giant22000 said:
No, you will not loose your data when flashing a new kernel.
Long story short, the advantages are a much more effecient and optimised kernel that will allow for better performance, battery life or a balance between the two depending on what your after and how you setup the kernel... Read, read and when you think you've read enough, read somemore!
Click to expand...
Click to collapse
Thank you for your reply,
I did read up on this kernel but the info I found wasn't for this device and I didn't know there was anything specific to the Moto G.
3RAN7ON said:
Thank you for your reply,
I did read up on this kernel but the info I found wasn't for this device and I didn't know there was anything specific to the Moto G.
Click to expand...
Click to collapse
Yup sure is, check out his Google+ page and there is plenty of good info there specific to the Moto G.
Hello guys,
I have Sony Xperia J and im looking for best/smoother ROM possible.I got in my phone now this ROM and i can say its okey but im looking something better if possible. My phone have unlocked bootloader and its rooted.
Thanks!
deanstreet said:
Hello guys,
I have Sony Xperia J and im looking for best/smoother ROM possible.I got in my phone now this ROM and i can say its okey but im looking something better if possible. My phone have unlocked bootloader and its rooted.
Thanks!
Click to expand...
Click to collapse
Doomsday is the best for me.
Sent from my ST26i
I'll try doomsday.Thanks! :fingers-crossed:
deanstreet said:
I'll try doomsday.Thanks! :fingers-crossed:
Click to expand...
Click to collapse
I have used AVD 1.6 for almost 1.5 year .. just bought Redmi for primary use..
tried many roms and kernel
Right now my XJ is on riches kernel .6.03 and Alien ROM 4.1 .
CPU overclocked to 1.5Gz .. and still battery goes for 4-5 days on moderate use. needless to say ROM is buttery smooth + no bloatware + both cwm and TWRP recoveries in kernel.
have 32G SD card, install onandroid backup and feel freedoms like never before.
daleksic8 said:
try doomsday.:
Click to expand...
Click to collapse
daleksic8
Going in that thread to check if it works with riches kernel , cause this is the only kernel on XJ that OCs atm..
its so awesome ... I would hv donated that developer if i was rich...instead I pressed 10 thanks for few days in his posts.
kapil.git said:
I have used AVD 1.6 for almost 1.5 year .. just bought Redmi for primary use..
tried many roms and kernel
Right now my XJ is on riches kernel .6.03 and Alien ROM 4.1 .
CPU overclocked to 1.5Gz .. and still battery goes for 4-5 days on moderate use. needless to say ROM is buttery smooth + no bloatware + both cwm and TWRP recoveries in kernel.
have 32G SD card, install onandroid backup and feel freedoms like never before.
daleksic8
Going in that thread to check if it works with riches kernel , cause this is the only kernel on XJ that OCs atm..
its so awesome ... I would hv donated that developer if i was rich...instead I pressed 10 thanks for few days in his posts.
Click to expand...
Click to collapse
I agree with you, i tried almost all roms on XJ. But I keep going back to alienrom.
But if looking for best UI, seraphic is the best.
There's Intuisy and Vengeance Kernel which both support OC for stock ROMs
Sent from my Xperia J
daleksic8 said:
There's Intuisy and Vengeance Kernel which both support OC for stock ROMs
Sent from my Xperia J
Click to expand...
Click to collapse
I havnt seen any OC statement in Changelog of Vengeance http://forum.xda-developers.com/xperia-j-e/orig-development/kernel-vengeance-t2134810
If you mean Vengeance reloaded .... that kernel doesn't work in XJ and thread is paused / abandoned.
I willl have to search for Intuisy though. .. never see people posting about it for XJ.. thanks ..
kapil.git said:
I havnt seen any OC statement in Changelog of Vengeance http://forum.xda-developers.com/xperia-j-e/orig-development/kernel-vengeance-t2134810
If you mean Vengeance reloaded .... that kernel doesn't work in XJ and thread is paused / abandoned.
I willl have to search for Intuisy though. .. never see people posting about it for XJ.. thanks ..
Click to expand...
Click to collapse
I have a bit older version of Vegeance kernel which supports OC up to 1,3GHz
Sent from my Xperia J
daleksic8 said:
There's Intuisy and Vengeance Kernel which both support OC for stock ROMs
Sent from my Xperia J
Click to expand...
Click to collapse
+ Simple kernel (1.7) support OC. I dont like vengeance because of microphone problem,while you listen to music and if somebody call,he cant hear you talking,until you reboot phone! Intuisy is great,but I dont like intuisy logo, i like Sony official. So "Simple kernel" is the best choose for me. It's fast,it has overclock + standard features
2010matej said:
+ Simple kernel (1.7) support OC. I dont like vengeance because of microphone problem,while you listen to music and if somebody call,he cant hear you talking,until you reboot phone! Intuisy is great,but I dont like intuisy logo, i like Sony official. So "Simple kernel" is the best choose for me. It's fast,it has overclock + standard features
Click to expand...
Click to collapse
I didnt encounter any microphone problem in vengeance kernel.
zephy09 said:
I didnt encounter any microphone problem in vengeance kernel.
Click to expand...
Click to collapse
I have the same problem on Intuisy kernel too,then I say this to Satrio,and he has fixed the bug!