Database Info

[HOWTO] Manually Flash Koush's ClockworkMod Recovery (If You Are Already Rooted)

1. Find the recovery image you want and MAKE SURE IT IS FOR YOUR PHONE (should say in where you download it what phone it is for).
2. Write down the filename of the recovery image EXACTLY as it is written (i.e. recovery-clockwork-2.5.0.1-heroc.img).
3. Put the recovery image file on the SD card (not in any folders).
4. Download Terminal from the Market if you don't already have it and install it (there are a few different terminals in the Market some have an onscreen keyboard and some don't experiment till you get one, also hold down Menu in some of them to bring up the onscreen keyboard if you don't see it).
5. Open the Terminal program and type the following (with hitting enter at the end of each line).
su
flash_image recovery /sdcard/name-of-recovery.img
6. In the above text, replace name-of-recovery.img with the name of your recovery image (make sure the .img is on the end).
7. Phone should pause for a second and then show you a new blank line. Turn it off and back on by holding down Home and Power to ensure it flashed correctly. Done.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ROM Manager and Clockwork Recovery Image
Superuser Black Screen, Lockup Solution's
Code:
[B][COLOR="Red"]Enable USB Debugging:[/COLOR][/B]
Press the Home button.
Press the Menu button.
Select Settings > Applications > Development.
Make sure that USB Debugging is checked. If not, check it.
[B][COLOR="red"]Clear Superuser data:[/COLOR][/B]
Press the Home button.
Press the Menu button.
Select Settings > Applications > Manage applications.
Find Superuser Permissions on the list. Tap it.
Tap “Clear data” and “Clear cache” if they’re enabled.

Thanks for that!!

forget what i said....found it lol

silverxj said:
Thanks for that!!
Click to expand...
Click to collapse
your welcome i know that not everyone is gonna have access to adb or want's to play with command prompt's
this method is a really simple quick way around using adb that get's the job done

first post updated with link's

ARoiD said:
your welcome i know that not everyone is gonna have access to adb or want's to play with command prompt's
this method is a really simple quick way around using adb that get's the job done
Click to expand...
Click to collapse
is there anyway to do this not using the command prompt? my SU request does not work anymore apparently...

DrededStar87 said:
is there anyway to do this not using the command prompt? my SU request does not work anymore apparently...
Click to expand...
Click to collapse
your phone is not rooted are you running the stock os or a custom rom?

ARoiD said:
your phone is not rooted are you running the stock os or a custom rom?
Click to expand...
Click to collapse
im running fresh 2.0d

DrededStar87 said:
im running fresh 2.0d
Click to expand...
Click to collapse
did you get prompted by Superuser after you entered su?

ARoiD said:
did you get prompted by Superuser after you entered su?
Click to expand...
Click to collapse
my screen just goes black, not the full thing, but i get an error message that says it stopped unexpectedly and must force close

DrededStar87 said:
my screen just goes black, not the full thing, but i get an error message that says it stopped unexpectedly and must force close
Click to expand...
Click to collapse
restart your phone and try again when you get prompted select always allow

ARoiD said:
restart your phone and try again when you get prompted select always allow
Click to expand...
Click to collapse
i still get the black screen after restarting

DrededStar87 said:
i still get the black screen after restarting
Click to expand...
Click to collapse
go into manage applications and clear the cache of Superuser then try again

Superuser solution's added to first post

Re: How To: Flash a New Recovery Image (If You Are Already Rooted) | The Unlockr
thanks for all the help guys, I have the green recovery screen now
Sent from my HERO200 using the XDA mobile application powered by Tapatalk

DrededStar87 said:
thanks for all the help guys, I have the green recovery screen now
Sent from my HERO200 using the XDA mobile application powered by Tapatalk
Click to expand...
Click to collapse
glad it worked out for ya

YES it worked(yay) i have super fast 728 one btw can i delete the recovery img off sd card now that it worked?

rulyskull said:
YES it worked(yay) i have super fast 728 one btw can i delete the recovery img off sd card now that it worked?
Click to expand...
Click to collapse
it's safe to remove the recovery image from your sdcard after you know it successfully flashed

I'm getting a huge number of read/write errors on this via Terminal - Attempting to flash Amon_RA 1.7 over CM 1.4 on Cyanogen 5.0.7...

kidblue said:
I'm getting a huge number of read/write errors on this via Terminal - Attempting to flash Amon_RA 1.7 over CM 1.4 on Cyanogen 5.0.7...
Click to expand...
Click to collapse
This is for the Sprint CDMA Hero only.

[1.6 ONLY]How to install a theme using Chewitt's Installer.

Zm4's Guide on "How to Install a theme using Chewitt's Installer​
Well, I am not so sure if other themes use the same installer but I am just making a guide for this installer because I have seen people are to confused to understand.
Now I am using DarkSensous for 026. DO NOT TRY IF UNDER 026 UNLESS YOUR PREPARED TO REFLASH AND REROOT.
*NOTE* Make sure you extract the folder and do not do the installation from the .rar file.
Go to the bottom first and read all of that or you will be stuck in one step.
First you go into the the contents folder and click the installation which I show in the picture underneath.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
You will see this.
Now you need to see if you have -rwsr- if you don't have -rwsr- then you need to do step 7 first.
Mines is already done when I first tried installing.
Alright now you will see this when you type 7 and enter in the CMD Prompt.
Mines is # but it is supposed to be $ since I have already done this step.
You need to copy each step one by one.
*DO NOT COPY THE $ SIGN* Just the text like it will show $ already and you just type in su and so on.
Once done you need to type in 2 for the application backup.
Just wait till its done.
Continue with typing 3.
After typing 3 and pressing enter this will show.
Just wait patiently.
Now type in 4 and press enter.
Wait patiently for it to finish.
Type in 5 and wait.
THE LAST STEP 6! :') I am so proud of you guys.
Just wait patiently now once your done you need to.
Now type in 9 and press enter.
Look at your phone it may restart on its own or you may need to restart it.
Enjoy your new theme.
Things to do before installing theme:
Root your phone.
When doing Step 7 if you are told to.
Make sure you have your phone with you to give permission to the su command.
I am not responsible for anything going wrong with your phone because I was doing the methods and installing a new theme just now.
_calum_ said:
You might want to include a link to the X10 drivers on the first page. I've seen a lot of people have problems with a 'device not found' error (myself included) even though SEUS is installed. I think it's mainly Windows 7 machines where the problem arises, but downloading and installing these drivers (using the device manager) seems to sort everything out.
Drivers:
http://developer.sonyericsson.com/wp...rs?cc=gb&lc=en
Click to expand...
Click to collapse
Credits:
Chewitt for the damn awesome themes he has made and for the installer.
xda-developers for being there.
Me- For making this guide.
You- For reading this and thanking us.
Calum- The link for the drivers.
Fun fact:
I uploaded all the pictures on a site which was dutch as it's default language well for me it was like that.
What my phone looks like after installing my theme:
*GUIDE FOR 2.1 IS OUT CLICK ME!*​

Bump...
I am bumping this because people need to see this.

during this whole process... are we supposed to connect the usb/phone to pc before hand... or we need to connect or transfer the theme to phone after a specific step???
how to root the phone?? how does it help??

Try the one click root method...
You can search the forums for the one click root method.
I used the universal androot to root my Xperia x10i.
Also you need to have your phone connected to the PC but it needs to be on debugging.
You go to:
Settings > Application > Development > USB DEBUGGING and Tap usb debugging...
Then you follow my steps.

It worked but....
It looks nothing like yours at all?? lol
Hasnt got the battery life or even the Black wallpaper etc
Only thing that has really changed is the scroll up menu background is black and the bar going across the top which shows battery life etc is black...
How did you get all that cool stuff? XD

It worked but....
It looks nothing like yours at all?? lol
Hasnt got the battery life or even the Black wallpaper etc
Only thing that has really changed is the scroll up menu background is black and the bar going across the top which shows battery life etc is black...
How did you get all that cool stuff? XD

Hi.. i'm new for this fourm . I own a x10i also .. so i want to change my original theme .... pls show me the way to download that needed files to do the step that shown on above. Thanks ya'll .

B1AcK kN1GhT said:
It worked but....
It looks nothing like yours at all?? lol
Hasnt got the battery life or even the Black wallpaper etc
Only thing that has really changed is the scroll up menu background is black and the bar going across the top which shows battery life etc is black...
How did you get all that cool stuff? XD
Click to expand...
Click to collapse
That's because those are widgets that he downloaded.

Thank you very much!!! Works like a charm!

B1AcK kN1GhT said:
It worked but....
It looks nothing like yours at all?? lol
Hasnt got the battery life or even the Black wallpaper etc
Only thing that has really changed is the scroll up menu background is black and the bar going across the top which shows battery life etc is black...
How did you get all that cool stuff? XD
Click to expand...
Click to collapse
I can try and find out the widget I have...
If you would like?
ookiller said:
Thank you very much!!! Works like a charm!
Click to expand...
Click to collapse
Your welcome.

man i have dowloaded the darksensous and i have enabeld usb debbuging when i start the cmd all the steps dosent work what should i do ?
best regards
pierre x10
i have a 026 rooted

pierrex10 said:
man i have dowloaded the darksensous and i have enabeld usb debbuging when i start the cmd all the steps dosent work what should i do ?
best regards
pierre x10
i have a 026 rooted
Click to expand...
Click to collapse
Did you do STEP 7 first?
I mean 7...
CHMD or something it is called...
But before that you need to press 1 and if you don't find a s in the beginning you need to start with step 7...
You also need your device with you...
And you need to extract the rar file somewhere...
And I am 026 rooted as well.

i did step 1 then step 7 it isin't working!...someone told that i have 2 install android sdk and drivers or something i didin't understand...so what i have to do ?

do step 7. i was having trouble too until i done this. copy the code given and allow superuser access for it on the device

watever said:
do step 7. i was having trouble too until i done this. copy the code given and allow superuser access for it on the device
Click to expand...
Click to collapse
Yes thats why I mentioned to read the bottom of the post.
Thanks, Zm4.

Thanks for doing this.

Chewitt said:
Thanks for doing this.
Click to expand...
Click to collapse
No Problem
I had trouble with this and I had gone through all the comments in your themes thread and I noticed people had trouble with this so I made a guide for this.

watever said:
do step 7. i was having trouble too until i done this. copy the code given and allow superuser access for it on the device
Click to expand...
Click to collapse
sorry to bother u with the same question...
whn i did the step 1 it said error device not found.... debugging is on and mass storage is off. pc companion is also installed... i hav rooted through 1 click method.. cant u plz tell me how to copy the code given and allow superuser access...
or m i doing something wrong???

Try running the CMD as administrator...
And did you use anything else for root?
If you used another application then install
UniversalAndroot...
And root your phone with it.

zm4 said:
Try running the CMD as administrator...
And did you use anything else for root?
If you used another application then install
UniversalAndroot...
And root your phone with it.
Click to expand...
Click to collapse
out of nowhere it worked 2day..... thnks for the help

[TOOL] schlexedeeler Tool V2 [ONLY ICS!] * ROOT Acer Iconia A210 [NOT USE ON JB!!]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
lieckedeeler & schlex2010
aka SCHLEXEDEELER
ONLY USE THIS TOOL IF YOU HAVE AN ICS VERSION (4.0.4)
WE ARE NOT RESPONSIBLE FOR BRICK OR ANY OTHER ERRORS ON YOUR TABLET
WE ARE NOT RESPONSIBLE FOR BRICK OR ANY OTHER ERRORS ON YOUR TABLET
ONLY USE THIS TOOL IF YOU HAVE AN ICS VERSION (4.0.4)
- Root incl. su & busybox binary (install Superuser from Play Store)
- permanent RW on system folder
- adb root shell
- DVB-T USB support (schlexedeeler Kernel 1.1+)
- CWM Recovery with touch
Click to expand...
Click to collapse
DOWNLOAD SCHLEXEDEELER TOOL V2
=============================================================================================================================
If you want flash back stock kernel or/and stock recovery and stock bootanimation.zip
First step: Copy stcok bootanimation.zip to /system/media
Second step: Flash stock kernel & recovery
It is stock recovery and kernel out of ICS 4.0.4​​​
Download stock bootanimation.zip
Click to expand...
Click to collapse
Download Tool to flash stock kernel & stock recovery
Click to expand...
Click to collapse
Password for the 7zip files:
iknowtherisk!​
Click to expand...
Click to collapse

Thank you! Going to try this as soon as i get to my a210.

.... Placeholder ....

And you can just press the 3 point?, Only root, the kernel does not need to unlock me ....

Probably not. It dumps a CWR image to /dev (overwriting the factory recovery?), which is boot, so you have to be unlocked.
CWR is used to mount /system (rw) so that adb can push Superuser and some other binaries.
I got stuck, after loading up CWR. My Windows 7 (x64) couldn't recognize my A210 while CWR was running. Downloaded USB drivers through the Android SDK, and the Acer USB drivers, but neither of them did any good i continued with the rooting process (so that it could clean up after itself) but nothing got pushed to /system (which is no surprise, seeing my tablet was unrecognized). So, now i have an unlocked bootloader, no root, and i'm unable to get into recovery... nothing happens, if i hold volume down, while powering on. I have to press the reset button, to restart it properly.
Could it be that there are no drivers for Windows 7 x64?
Edit: ok, i've read through the topic at android-hilfe.de, and got it working (had to manually install the driver). Now i have root! Thank you!

help for dummies
deleted

deleted

does it give a instruction for this tool, it would be great
Greets

Is anyone working on a ROM or MOD for the Iconia A210 ?
Sent from my A210 using xda app-developers app

Hey 4.1.1 To have?

Alexey71 said:
Hey 4.1.1 To have?
Click to expand...
Click to collapse
What exactly is your question?
I don't know if it will work with 4.1.1, because I do not have 4,1.1 on my tablet! You have?

I get everything back to its factory state, or even be the standard kernel?

Alexey71 said:
I get everything back to its factory state, or even be the standard kernel?
Click to expand...
Click to collapse
Sorry for OT:
Please learn english, or use a better translater tool for your questions!
You use this tool at your own risk, so please stop bugging me with private messages AND forum posts!

Hy everybody
I tried to root my A210 yesterday using your program. But I point out some difference between what happen and the "how to".
First, I didn't have 4 option when I start the tool. I just have the bootloader option and a root option.
Following the "how to", I first activated the open mode to boot.Then, I choose the second choice (root) and that's when it didn't follow the "how to" document. My A210 did restart and boot to a*SCHLEXEDEELER edition but it never ask me to restore my data. And when it get restarted, everything was as it were.I also didn't have all the part about installing the driver because my PC still detect the tab as "adb interface".
I aldo never had the section about mount and unmount system.
Then the*SCHLEXEDEELER tool ask me if I wanted to install the custom recovery. As I was pretty scared of what might happened, I answered "no". So the tool ended.
I cheched on my tab but I was still not root so I did all that stuff again but choose "yes" instead of "no" for the custom recovery.The*SCHLEXEDEELER tool printed out many lines but one caught my attention.
It was something like :"data\tmp\cwm[...].img : no such file or dir".there is a file called "cwm[...].img" (the [...] is because I don't recall the exact name) in the folder in wich there is the*SCHLEXEDEELER tool.
But I didn't suceed in making it finding this file.
And when I checked whether I'm root or not, it turns out that I wasn't.
Any ideas or suggestion?
Still, thanks a lot for your job.

Tab acer A210 user said:
Hy everybody
I tried to root my A210 yesterday using your program. But I point out some difference between what happen and the "how to".
First, I didn't have 4 option when I start the tool. I just have the bootloader option and a root option.
Following the "how to", I first activated the open mode to boot.Then, I choose the second choice (root) and that's when it didn't follow the "how to" document. My A210 did restart and boot to a*SCHLEXEDEELER edition but it never ask me to restore my data. And when it get restarted, everything was as it were.I also didn't have all the part about installing the driver because my PC still detect the tab as "adb interface".
I aldo never had the section about mount and unmount system.
Then the*SCHLEXEDEELER tool ask me if I wanted to install the custom recovery. As I was pretty scared of what might happened, I answered "no". So the tool ended.
I cheched on my tab but I was still not root so I did all that stuff again but choose "yes" instead of "no" for the custom recovery.The*SCHLEXEDEELER tool printed out many lines but one caught my attention.
It was something like :"data\tmp\cwm[...].img : no such file or dir".there is a file called "cwm[...].img" (the [...] is because I don't recall the exact name) in the folder in wich there is the*SCHLEXEDEELER tool.
But I didn't suceed in making it finding this file.
Click to expand...
Click to collapse
FIRST OF ALL you don't read the thread correctly:​
The "How to" of Heroturtle is NOT for V2.0 Final Edition!! Do not use that "how to" !!​
So here is what the tool do if you select root:
Start your device into bootloader (fastboot mode)
Flash boot.img to your device via fastboot
Pushing binary files like su and busybox to your tablet
READY!
It's important that you have install all drivers correctly!
The 4 points are from the Versions before and are not necessary anymore now.
If you have done the root process, you must install SuperUser from the PlayStore! After that you have root!
Use only schlexedeeler Tool V2... You are confusing something and write about things that no longer exist in the new version!!! No restore my data. etc...

Sorry for my bad English
schlexedeeler Kernel 1.1, Not mount USB - NTFS format....

ok, got it.
I will try to install super user tonight and see if it's good.
I'll write a message to keep you inform about that.
thank you for your quick and pertinent reply

Tab acer A210 user said:
ok, got it.
I will try to install super user tonight and see if it's good.
I'll write a message to keep you inform about that.
thank you for your quick and pertinent reply
Click to expand...
Click to collapse
If not, please let me know, then we will find a solution for you, but I think if you do only that, what the tool tell you, you're on the right way :good:

Alexey71 said:
Sorry for my bad English
schlexedeeler Kernel 1.1, Not mount USB - NTFS format....
Click to expand...
Click to collapse
I will talk to lieckedeeler... Maybe he have a solution for that.

Minor Update 2.01:
* correct some missspellings
* correct adb command for flashing CWM recovery

{GUIDE][20/01/2013] New Root method for Hero H2000+ Step by Step

HERO H2000+ Rooting
here is new safe solution on how to root the "unrootable" Hero H2000+
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
First things first make sure you download and install the MTK drivers from here https://dl.dropbox.com/u/76038325/MTK_Drive.zip and download and extract the SP Flash tool from here https://dl.dropbox.com/u/76038325/SP_Flash_Tool_v3.1220.01.zip​
Warning! This is at your own risk,i am not responsible for any damage this may do to your device and always backup before
1: Download Superuser-3.2-RC3-arm-signed.zip and put on the root of your sd card
2: Download CWM H2000+.zip and unzip it
3: go to where you unzipped SP Flash Tool,right click flash tool and run as Admin
4: once opened Click the “Scatter-loading” button
5: Go to where you unzipped CWM H2000+.zip and load the scatter file
6: Power off the phone completely
7: click Download in the SP Flash tool,Click yes and connect the phone to USB
8: Once flashed you should see the green circle,when you see this its safe to remove the device
9: Press the power on + volume up buttons to go into CWM recovery
10: when in CWM backup your rom making sure you have a min of 1gb free on the memory card
11: once finished go to install zip,select from sd card and go to Superuser-3.2-RC3-arm-signed.zip and install
12: once intalled go back to the main CWM,wipe cache and go advance and wipe dalvic cache
13: reboot the phone
14: You are now rooted
15: Enjoy!
*Please note this will not work if you are running windows 8

Help Please. Clould not Root it.
Step
8: Once flashed you should see the green circle,when you see this its safe to remove the device
Did not see the circle, Only to colored bars full at 100%.
Step
11: once finished go to install zip,select from sd card and go to Superuser-3.2-RC3-arm-signed.zip and install
The files is on sdcard but i can not find it. I can see only a list of directories.
What is going rong? How can i check if i have rooted my phone?
Thanks.:good:

make sure you have the drivers intalled correctly,when you open flash tool make sure you open as admin and put the superuser zip on the main bit of the sd card,not in any folders and should work,when you reboot to see if it has worked you will see the superuser app in the app draw.

I´m looking forward to try your rooting method since i only want to get rid of the three annoying buttons at the buttom, but is there anyone who could tell me how to do a BACKUP in case something goes wrong and i want to get my phone into its original form? there are a lot of threads about it, i know, but i didnt understand them. could one of you please tell me how to? THANKS :good:

Still can not root it.
My friend thanks for your time.
But i still can not root my phone. I had try deferent computers but nothing. Is it possible to find some other drivers? Because at the procedure i am hearing two times the connection and disconnection of the USB. (At Xp and Win 7). I made all the steps as you describe. I believe that is a driver problem but i do not know how to resolve it. Any suggestions? Thanks again for your time.:good:

bzanios said:
My friend thanks for your time.
But i still can not root my phone. I had try deferent computers but nothing. Is it possible to find some other drivers? Because at the procedure i am hearing two times the connection and disconnection of the USB. (At Xp and Win 7). I made all the steps as you describe. I believe that is a driver problem but i do not know how to resolve it. Any suggestions? Thanks again for your time.:good:
Click to expand...
Click to collapse
I got the exact same problem! good to know that there are others with this problem

Thank you, is a very useful guide ! :good:

ahnuc said:
Thank you, is a very useful guide ! :good:
Click to expand...
Click to collapse
does it work for you .
and for wich firmware version is this ?

AW: {GUIDE][20/01/2013] New Root method for Hero H2000+ Step by Step
Hi theiphonekiller
Will this work for my phone?
Sent from my H2000+ using xda premium

Get back camera back
Hi I rooted my h2000+ last year & lost access to the back camera
Will this bring the camera back???

joshr2d2 said:
Hi I rooted my h2000+ last year & lost access to the back camera
Will this bring the camera back???
Click to expand...
Click to collapse
No. Just flash a working rom (search for H2000+_121225_MT6628)

Improved guide here if you guys want to check it out
http://forum.xda-developers.com/showthread.php?t=2138585

Driver links
Dropbox links are dead can you reupload please then ill let you know how i get on thanks

Good night to all, sorry for opening this old thread but I'm in a biggest problem(not for you guys). Explain the problem:
I want to root my phone, a Hero H2000+, following this tutorial and others. When root is OK I try to backup the system with CWM Recovery but the backup doesn't make full. The backup always stop in the Backup system... and this doesn't continue. Because this doesn't continues I restore defaults in the Android system, but when the phone reboots it enter into recovery mode(CMW Recovery) and then "Formatting /data" and "Formatting /cache" and then??? It doesn't reboot, this stay here. On this stage I was bloked but following this tutorial my phone now reboots when enter to CWM Recovery and reboot and reboot. Fuc**** loops!!! What can I do to revive the phone???!!
The CWM Recovery I used is ClockworkMod 6.0.2.8 with Scatter and flashed with SPFlash Tool v3.1222.00.
Thanks a lot for the replies
Update: I flash again with another ROM I downloaded from a China page and the phone boots OK. If someone wants the ROM stock, please send me a MP and I will give you the download link.
Thanks and sorry for the post. I'm very preocupated!

Installing twrp and rooting the sm-t116 (tab 3 lite 7.0 3g)

IM NOT RESPONSIBLE IF YOU BRICK YOUR TAB OR DECIDE TO BE CARELESS OR CREATE A CYCLONE... you know the drill.
HOW TO ROOT SM-T116 TAB 3 LITE 7.0 3G VOYAGE-XX ( Galaxy Tab 3 Lite VE (3G) (SM-T116 ))
After searching for over a month on how to root/install twrp all i cound find were instructions for the SM-T110/1...
if thread already exists pls notify
N.B I TAKE NO CREDIT FOR THIS RECOVERY IN ANYWAY
I am writting to help fellow SM-T116 owners... Since ive been searching for a long time.... I believe there isnt a guide to root this Tab yet.
- N.B MAKE SURE you device's code name is goyave or goyave3g
1. Download the twrp recovery here
- download the recovery in .tar format...
- you will upgrade to v3 manually.
2. Download Odin v3.10.* here
-> copy them to a place you know on ur pc such as Desktop
3. Boot your Tab 3 lite to download mode by: pressing "power + home + vol down"
-> believing all your drivers are installed correctly
3.1 open Odin*.exe ,
3.2 connect your tab and press volume up...
-> at this stage Odin should recognise your device
on the ID:COM section like
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4. UNTICK AUTO REBOOT or you wont be able to enter recovery
5. Tap pn AP and go to the recovery you downloaded.
select it
6. Press on Start to begin the flashing process
-> After Odin flashes the recovery it will tell you PASS!
7
7.1. Preas and hold POWER + VOLUME DOWN
7.2. when the screen goes black change and hold HOME + VOLUME UP
Now you will enter TWRP... stage 1 done.
rooting on post #2:good:​

Now TWRP is functional... Time to root.
1. Download Chainfire's SuperSu flashable zip here
-> and thanking is not a crime.
2. Reboot to recovery...
ALLOW TWRP TO MODIFY THE SYSTEM PARTITION
3.1. Select install
3.2. navigate to your supersu zip
/sdcard/* or /extsdcard/*
-> when you are at the folder where your zip is it will be on the dialog on the right.
4.1. select it
4.2. swipe to confirm
4.3. select wipe cache/dalvik and reboot...
Now you have a Custom Recovery and you are rooted... Doors open.
Becarefull to not to open the wrong doors ​
THE PEOPLE WHO MADE THIS POSSIBLE
CREDIT GOES TO:
BIG THANKS TO TeamWin - TWRP FOR THE AWESOME RECOVERY AND
CHAINFIRE for the awesome supersu
SAMSUNG FOR Odin and Demostration Image
THATS IT...!!!!!!!!!!!!!!!!!!!!!!!!!!
will upload deodexed and zipalign rom soon.

Very nice !
:laugh::laugh::laugh:

This works for 116NY too xD

hello I cannot get this to work on my SM-t116 I must be doing something wrong
Can you please give a more detailed process on the procedure?

I am new with Android. Please, can you describe step by step process

peter6206 said:
hello I cannot get this to work on my SM-t116 I must be doing something wrong
Can you please give a more detailed process on the procedure?
Click to expand...
Click to collapse
Which part fails bro cause a more detailed procedure is a video right

diana-TF said:
I am new with Android. Please, can you describe step by step process
Click to expand...
Click to collapse
Ill add numbering then...
I wrote every step 1 by 1.
U r probably comfused cause there aren't any numbering as to what to do first.

hi...Replies to Android 4.4.4؟؟؟؟؟

h.azara said:
hi...Replies to Android 4.4.4؟؟؟؟؟
Click to expand...
Click to collapse
Whatsup

Can you please post a link for custom rom

Ponie123 said:
Can you please post a link for custom rom
Click to expand...
Click to collapse
Custom Rom like??

nhlalukoG said:
Custom Rom like??
Click to expand...
Click to collapse
Like CYANOGEN or Pac man

Lol they r built bro...
N i guess no one has built it...

peter6206 said:
hello I cannot get this to work on my SM-t116 I must be doing something wrong
Can you please give a more detailed process on the procedure?
Click to expand...
Click to collapse
i will help you,
1: install kingoroot on your pc
2:Enable USB debugging
3:connect your phone to pc wait for processing
4:when 99% your phone automatically restarted, do not put off the usb cable when it complete
5:hope your phone will b e rooted

I have this tab as above, it is locked(programmed) using an administrative app named Cellwe EMM. Basically i cannot download anything on this tab with neither usb nor sdcard including the internet. All i have to do to get rid of this security is wipe using custom recovery. When i get the tab in download mode it has this MDM DOWNLOAD BLOCK which block me from flashing and installing custom recovery in this tab. My only hope is if i can create an update.zip for twrp or cwm to be installed in this tab using stock recovery. This is where i need help,can someone create this for me or help me with a guide to do this

Adebayo0437 said:
I have this tab as above, it is locked(programmed) using an administrative app named Cellwe EMM. Basically i cannot download anything on this tab with neither usb nor sdcard including the internet. All i have to do to get rid of this security is wipe using custom recovery. When i get the tab in download mode it has this MDM DOWNLOAD BLOCK which block me from flashing and installing custom recovery in this tab. My only hope is if i can create an update.zip for twrp or cwm to be installed in this tab using stock recovery. This is where i need help,can someone create this for me or help me with a guide to do this
Click to expand...
Click to collapse
Hahaha not possible... the update.zip need to be signed by Samsung specifically...
Unless you get a modified stock recovery which needs to be flashed via Odin...

Ok

Rushaan n said:
Ok
Click to expand...
Click to collapse
Does it have "oem unlock" on developer settings??

nhlalukoG said:
Does it have "oem unlock" on developer settings??
Click to expand...
Click to collapse
Deleted