Database Info

I think my lg g2x is bricked (im kind of a noob)

What i did before this problem
1.used the lg support tool to go from froyo to gingerbead (worked great)
2. attempted to use clockwork rom to install icecream sandwhich based rom (it failed)
What i get now
1.If i turn my phone on like i always would i would get the lg logo, and it would stay like that forever
2. if i try to boot into recovery i get "s/w upgrading"
I contacted lg and they said to send it in and wait 2 WEEKS to get it back and there may be an additional charge
Can someone please help me fix this without going to lg. I just want to be able to use my phone again :'(

run this:
http://forum.xda-developers.com/showthread.php?t=1590523
I did the exact same thing to my phone the other day. Then install the new rom via clockworld after its done.

But if you installed the 2.3.4 then don't update to any rom besides the kwes 2.3.4 because anything else you won't have audio or anything while in call there is no fix for it yet besides using kdz to downgrade.
Sent from my LG-P999 using xda premium

bj83gc said:
run this:
http://forum.xda-developers.com/showthread.php?t=1590523
I did the exact same thing to my phone the other day. Then install the new rom via clockworld after its done.
Click to expand...
Click to collapse
I tried it and it didnt help.
if i do a normal boot i get the lg logo wiht a loading bar that eventual stops and does nothing
if i boot into recovery i get "s/w upgrading" again

you have to use nvflash to snap it out of that... I remember i had it stuck on that for awhile until i flashed the stock recovery/bootloader stuff and then reflashed cwm and then it finally came to

NVflash CWM from http://forum.xda-developers.com/showthread.php?t=1566681
if you're unsure of the APX drivers set-up you have a more basic guide here:
http://forum.xda-developers.com/showthread.php?t=1056847
Remove the battery.
Plug in your USB cable to your PC.
Hold Volume Up and Volume Down at the same time keeping them held down.
Plug in the USB cable to your phone. (Keep the buttons held until Windows detects a new APX device.)
Open Device Manager in Windows and you should see "APX Device" listed with an error icon.
Right click on the APX device.
Select 'Update driver software'.
Select 'Browse my computer...'.
Select 'Let me pick...'.
Select 'Have disk'.
Browse to directory you extracted the *driver* software to: One-Click-G2x-recovery-flasher-09-23\APX.
Accept any warnings, including the big red alert (you may need to disable UAC).
Now in Device Manager under 'USB Controllers' you should have an 'NVIDIA USB Boot-recovery driver for mobile devices'.
If not, uninstall the driver, reboot, rinse and repeat.
Click to expand...
Click to collapse

Волк said:
NVflash CWM from http://forum.xda-developers.com/showthread.php?t=1566681
if you're unsure of the APX drivers set-up you have a more basic guide here:
http://forum.xda-developers.com/showthread.php?t=1056847
Click to expand...
Click to collapse
No change, thanks for trying :'(

just keep dicking around with NVflash... its the only way you can wake it up from a soft brick of that form

JHaste said:
just keep dicking around with NVflash... its the only way you can wake it up from a soft brick of that form
Click to expand...
Click to collapse
like what, what do i do. i am a total noob.

johnlicoski1204 said:
like what, what do i do. i am a total noob.
Click to expand...
Click to collapse
I don't think you're booting the phone up into cwm the right way.
Lol do this:
Make sure phone is off. While the phone is off hold down the volume down button.
While still holding volume down, hold the power button.
Continue to hold BOTH the volume down and power buttons. When the SECOND LG logo appears, let go of both of the buttons.
And no offense, but if you're not comfortable with modding your phone... you really shouldn't do it or ask someone else who knows what they're doing to do it.

buru898 said:
I don't think you're booting the phone up into cwm the right way.
Lol do this:
Make sure phone is off. While the phone is off hold down the volume down button.
While still holding volume down, hold the power button.
Continue to hold BOTH the volume down and power buttons. When the SECOND LG logo appears, let go of both of the buttons.
And no offense, but if you're not comfortable with modding your phone... you really shouldn't do it or ask someone else who knows what they're doing to do it.
Click to expand...
Click to collapse
Agree modification to a cellphone can be risky.
Sent from my LG-P999 using xda premium

From my personal experiance with the G2x (i thought i had bricked my phone), i have discovered that it is nearly impossible to brick this phone. I had ran the g2x nullifier and fully wiped my phone clean. When I power up the phone, all i get is the initial white LG logo. Luckely, i discovered the following thread that got my phone functional again:
http://forum.xda-developers.com/showthread.php?t=1248644
Try the above thread and see if your phone gets recovered to a functional state.

dot64 said:
From my personal experiance with the G2x (i thought i had bricked my phone), i have discovered that it is nearly impossible to brick this phone. I had ran the g2x nullifier and fully wiped my phone clean. When I power up the phone, all i get is the initial white LG logo. Luckely, i discovered the following thread that got my phone functional again:
http://forum.xda-developers.com/showthread.php?t=1248644
Try the above thread and see if your phone gets recovered to a functional state.
Click to expand...
Click to collapse
That script is perfectly fine and didn't hurt your phone at all. It states that it will wipe everything out even the rom you were previously on. So when the phone rebooted it stayed on that LG logo because it didn't have a rom to bootup.
At that point a quick battery pull and reboot into recovery was all you needed to do.
Sent from my LG-P999 using xda premium

Try flashing the stock recovery thru the one click nvflash utility and leave it off for a few min. Then run the g2x batch cleanup tool and see if it then let's u boot into the recovery. (By holding down volume - when hitting power on)
Sent from my LG-P999 using XDA

johnlicoski1204 said:
What i did before this problem
1.used the lg support tool to go from froyo to gingerbead (worked great)
2. attempted to use clockwork rom to install icecream sandwhich based rom (it failed)
What i get now
1.If i turn my phone on like i always would i would get the lg logo, and it would stay like that forever
2. if i try to boot into recovery i get "s/w upgrading"
I contacted lg and they said to send it in and wait 2 WEEKS to get it back and there may be an additional charge
Can someone please help me fix this without going to lg. I just want to be able to use my phone again :'(
Click to expand...
Click to collapse
Ok, so then its safe to assume that you rooted your phone first? Then you set up your phone by using nvflash so you can use ClockWorkMod (CWM)? Then booted your phone into recovery and tried to install ICS? If not done in this order then thats your fault. If you did it in this order then you missed something.
A common mistake is trying to install a ROM via CWM while the phone is running. When you do this the phone restarts and gives you the error triangle with android underneath it.
http://forum.xda-developers.com/showthread.php?t=1039985 Tells you how to do as well as provides links to everything it doesn't.
As for recovery they provisded the right link. Follow it to the "T" and you'll be ok.

Try the link below
johnlicoski1204 said:
What i did before this problem
1.used the lg support tool to go from froyo to gingerbead (worked great)
2. attempted to use clockwork rom to install icecream sandwhich based rom (it failed)
What i get now
1.If i turn my phone on like i always would i would get the lg logo, and it would stay like that forever
2. if i try to boot into recovery i get "s/w upgrading"
I contacted lg and they said to send it in and wait 2 WEEKS to get it back and there may be an additional charge
Can someone please help me fix this without going to lg. I just want to be able to use my phone again :'(
Click to expand...
Click to collapse
Hope fully this fix your issue: http://www.youtube.com/watch?feature=player_embedded&v=TozZKt7_JD8

d12unk13astard said:
That script is perfectly fine and didn't hurt your phone at all. It states that it will wipe everything out even the rom you were previously on. So when the phone rebooted it stayed on that LG logo because it didn't have a rom to bootup.
At that point a quick battery pull and reboot into recovery was all you needed to do.
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
But the key issue was that CWM recovery was destroyed as well after nullifing thus leaving me in a stand still to do something. nvflash was the only thing left to recover the phone at that point which worked very well.

There is pretty much no way that after running either the One-Click or Cleanup Batch that he can't get the phone into CWM unless there is a hardware problem. This most likely means that the problem isn't with the scripts or phone, but with the procedure he is attempting.
Even if nullifier (which I don't think is of much use here) had wiped all partitions, the NVFlash will still pop you out of it and leave you with a working CWM.
So keep reading and keep watching videos of how to do it and make sure your drivers are correct. READ a bunch first.
And remember that he got here due to an LG software problem or issue with operation, not from trying to flash as a noob, so he knows he's in over his head right now.
Remember, we all had to start swimming somewhere and it usually wasn't pretty at first. Mine was a corrupted Motorola RAZR.

It appears that this is an older post, but if you are still having this issue, then maybe I can help. If anyone else finds this later, hopefully it helps them as well. I just did something similar and I thought I was screwed. I rooted my phone, installed a ROM (Hellfire... nice ROM BTW), then I got the nullifier. I installed the ROM before I ran the nullifier because I wanted to make sure the ROM worked. However, after running the nullifier, the ROM didn't work.
The only thing that I could get to show was the LG logo at the startup... no second logo (Blue LG), no SW upgrade... NOTHING. The phone wouldn't do anything else. Luckily, I wasn't the first to have this issue and they found the solution...
forum.xda-developers.com/showthread.php?t=1566681
Since you have already done other steps, I am assuming that you already have the drivers installed. So, the only thing you should need to do is download the ROM then install it by clicking flash.bat. The instructions on the page are pretty easy to follow.
No need to deal with the NvFlash until AFTER you do the above procedure. You will need to run it again after the above procedure because it puts it back in the original state (pretty much). The NvFlash will give you the superuser and Clockmod back. You should be good to go after that.

There is no way u can brick the g2x......even if u wanted to.........keep messing around
Sent from my cm_tenderloin using xda app-developers app

Not sure if its bricked...

Hello everybody. Bought slider101 us... 8.6.5.18 Successfully rooted with Razorclaw. Superuser installed.
Didnt have a chance to flash CWR.
Tried to update through asus notification that i got on my tablet. At the end of update it said something like "failure to update",but it changed to 8.6.5.21 on my tablet. After that tried to install recovery through" recovery installer", couldnt do it. I guess I lost my root on my tablet because of that update and Razorclaw doesnt work with .21 I did try to fix it through ADB commands which led my tablet to non stop rebooting. Cant load a screen after ASUS logo. It keeps rebooting.
The last try was this Nvflash "Unbricking and forever root" but when I hit download batch file it disconnects me from computer and looks like APX is disapearing on Device Manager place.
Cant load to recovery cause didnt install it. Tried to find sollution ,no luck so far. im not sure if its bricked. Thanks for any help in advance.
Update: problem fixed-- somehow could get into the screen where i could wipe data, I think it was system kind of recovery. And then installed nachoroot, cwm recovery, android revolution super wipe and ROM. Works perfect!

I belive you're not supposed to update when rooted.
Sent from my PG86100 using xda app-developers app

There are a few NVflash methods to unbrick devices here. You should read them all in general thread and development thread and see which one suit your slider101. And when you find one, please try different PC to do it. Some PC just act strange but some would give you profit..

farsight73 said:
There are a few NVflash methods to unbrick devices here. You should read them all in general thread and development thread and see which one suit your slider101. And when you find one, please try different PC to do it. Some PC just act strange but some would give you profit..
Click to expand...
Click to collapse
Thank u! Problem fixed. Somehow could get into wipe.data screen and that fixed the problem. Could load to normal screen.

root0660 said:
Thank u! Problem fixed. Somehow could get into wipe.data screen and that fixed the problem. Could load to normal screen.
Click to expand...
Click to collapse
Just for future reference, what steps did you take to fix it? It was my understanding that nvflash does not work for the Slider at all.

Solar.Plexus said:
Just for future reference, what steps did you take to fix it? It was my understanding that nvflash does not work for the Slider at all.
Click to expand...
Click to collapse
I think it wasnt really bricked, it just couldnt load main desktop screen. Its stucked on ASUS logo.I managed to get into system recovery screen where u can see "wipe data" and i think an image of droid man. So by pushing volume down and turning it on u can see that screen, and u need to point onto "wipe data" little green square by pushing volume up right after Ive read something like "cold boot" written with small white letters. And then it started to wipe all data. After that it could boot to the main desktop screen. From there I rooted with nachoroot since I have 8.65.21. Razorclaw can root up to I think .19.

[Q] What did I do...

Ok... I bought my Transformer about a year ago, rooted it and everything... was doing great, but decided to go back to stock rom, but still wanted to be rooted... ok I had TWRP Recovery on it... I downloaded the newest stock off ASUS site... US_epad_user-9.2.1.27.zip... and put on my SD card... I wiped everything and flashed it like a normal rom... now here is the crap part... I can boot into the rom, and everything is great, but I cant seem to be able to root or anything, when I try Power/VOL Down/VOL UP... I get a standing android for a few seconds then the dead one with a red ! point... I can still use the device, but would really like to get rooted again... HELP... have tried EasyFlasher now, and Brks_rootkit_v8... But doesnt seem to find the device with the dead android.
Thanks for any help

lexknight said:
Ok... I bought my Transformer about a year ago, rooted it and everything... was doing great, but decided to go back to stock rom, but still wanted to be rooted... ok I had TWRP Recovery on it... I downloaded the newest stock off ASUS site... US_epad_user-9.2.1.27.zip... and put on my SD card... I wiped everything and flashed it like a normal rom... now here is the crap part... I can boot into the rom, and everything is great, but I cant seem to be able to root or anything, when I try Power/VOL Down/VOL UP... I get a standing android for a few seconds then the dead one with a red ! point... I can still use the device, but would really like to get rooted again... HELP... have tried EasyFlasher now, and Brks_rootkit_v8... But doesnt seem to find the device with the dead android.
Thanks for any help
Click to expand...
Click to collapse
Go to development thread and look at easyflash, download easyflash and restore your tablet... read the instructions properly...
Sent from my Transformer using xda app-developers app

easyflasher requires APX mode, doesn't matter if it's "a dead droid". Just put it in APX, install the drivers (instructions are in the post) and flash a new firmware, then follow instructions for root (just hit the button in easyflasher). As long as your device is detected in APX, then it'll work.

Stupid me !!!
I was holding Power/Down Vol.... needed to be holding Power/UP Vol... to inter into APX... what a Dummy I feel like... ok... I am back to happy...

[Q] stuck on lg screen on my lg g2x

i recently got into rooting and setting up my phone for new roms but im still new at it. i ended up bricking my phone to the lg screen with the blue swipe across the screen. my computer will not register the driver to use recovery flasher. i need help. anyone wanna help out a noob?

Try using nvflash to revert back to 2.3.4 I can't give you a link but it's easy to find in the development section

jj_z1 said:
Try using nvflash to revert back to 2.3.4 I can't give you a link but it's easy to find in the development section
Click to expand...
Click to collapse
i tried to use nv flash but no matter what i do i cant seem to make my phone register in the usb driver. if i could make it register i would be able to flash it then.

Did you try using the kdz updater? it's a tricky method, but if you follow the guide properly you should be able to get it going

jj_z1 said:
Did you try using the kdz updater? it's a tricky method, but if you follow the guide properly you should be able to get it going
Click to expand...
Click to collapse
i dont know how to go about it.

laroacha said:
i dont know how to go about it.
Click to expand...
Click to collapse
Never mind my last post, you need to be able to boot into a rom to use kdz updater, it's been a while since I had to do this kind of thing.
I'm pretty sure you only soft bricked your phone (i.e. it still turns on) and the only way, that I know of, is to use nvflash. I've had the same problem before, there could be many things that are causing the phone to not be recognized by your computer. Follow this guide http://forum.xda-developers.com/showthread.php?p=17258229
when you plug the usb into your phone make sure the audio on you computer is loud enough for you to hear that "usb recognized" sound. If you don't hear it, or it does not get recognized, try using a different usb port on your computer, believe me that actually worked for me a couple of times. Also, make sure you follow the steps very carefully because if you use the wrong button combination, or release the buttons too early, it won't work.
I wish I could help you more, but that's all i've got.
Good luck, and if by any chance you get it fixed, don't try to root your phone using any root tools, simply nvflash cwm recovery and flash your choice of a custom rom, that will automatically give you root privileges.

jj_z1 said:
Never mind my last post, you need to be able to boot into a rom to use kdz updater, it's been a while since I had to do this kind of thing.
I'm pretty sure you only soft bricked your phone (i.e. it still turns on) and the only way, that I know of, is to use nvflash. I've had the same problem before, there could be many things that are causing the phone to not be recognized by your computer. Follow this guide http://forum.xda-developers.com/showthread.php?p=17258229
when you plug the usb into your phone make sure the audio on you computer is loud enough for you to hear that "usb recognized" sound. If you don't hear it, or it does not get recognized, try using a different usb port on your computer, believe me that actually worked for me a couple of times. Also, make sure you follow the steps very carefully because if you use the wrong button combination, or release the buttons too early, it won't work.
I wish I could help you more, but that's all i've got.
Good luck, and if by any chance you get it fixed, don't try to root your phone using any root tools, simply nvflash cwm recovery and flash your choice of a custom rom, that will automatically give you root privileges.
Click to expand...
Click to collapse
every time i look at my apx driver it always tells me to troubleshoot but it always says driver not installed. ive downloaded the same driver in different posts just to make sure but nothing helps. Wireless shops are useless. I live in vegas and there isnt a single store with a person smart enough to figure it out.lol. ive given my phone up for days at a time to shops who brag about "WE CAN FIX ANYTHING" they lied. well i guess im going to search for a few more hours on here to get some kind of lead. thanks for the help. if you kknow anything else or figure something out i would appreciate the help.

Have you tried this stuff?
http://forum.xda-developers.com/showthread.php?t=1619932
It sounds to me like your pc's jacked up the driver somehow. Try plugging in the phone with the battery out and holding all 3 buttons, go into your device manager and uninstall all the USB drivers. Then reboot and try following the apx driver installation procedure again.
Sorry if you tried all this stuff a million times already.

I would say the two things that I would focus on would be to first fix the drivers on your computer. I downloaded mine from the LG website. Next is to flash CWM Recovery so you can flash a rooted ROM to your phone. I would go back to the thread where you got the instructions to start flashing and ask the same questions but only after reading the whole thread. There the orig. developer might chime in and you'll have more specific answers focused on your specific issue.
It's true your phone isn't bricked and have patience and you'll get it fixed.
Sent from my LG-P999 using xda premium

superhero7 said:
I would say the two things that I would focus on would be to first fix the drivers on your computer. I downloaded mine from the LG website. Next is to flash CWM Recovery so you can flash a rooted ROM to your phone. I would go back to the thread where you got the instructions to start flashing and ask the same questions but only after reading the whole thread. There the orig. developer might chime in and you'll have more specific answers focused on your specific issue.
It's true your phone isn't bricked and have patience and you'll get it fixed.
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
well i have all the drivers needed. and the computer is fine but the phone is not. i mean the pc doesnt quite read the phone right. with that being said i dont know how to flash cwm recovery to a phone my computer cant read. im running windows 7 64bit and all my usb drivers work fine.

CWM = Clockworkmod Recovery (everyone remember this is a newbie).
Important question: Did you do a backup before making any changes to your phone?
Also, try this: remove your phone's battery for 30 seconds. Put the battery back in. Press and hold the volume down button, then press and hold the power button. Hold both buttons. First you'll see the white LG screen, then wait, when you next see the blue LG screen wait ONE second (no longer) then release the buttons. Tell us what the phone does then and what the screen says.

Have you tried taking out your SIM card and micro SD card?
Usually right after I take them out and plug in my phone while holding volume up and volume down... it usually works after that.
Yup, that's my problem. No matter how many USB ports I tried it still wouldn't read it until I took out the SIM card and micro SD ;p.

Try this on for size...
laroacha said:
well i have all the drivers needed. and the computer is fine but the phone is not. i mean the pc doesnt quite read the phone right. with that being said i dont know how to flash cwm recovery to a phone my computer cant read. im running windows 7 64bit and all my usb drivers work fine.
Click to expand...
Click to collapse
Sounds like you are having the same the issues i was having with my phone why dont you try this..... First you have to flash a custom recovery image for your phone, follow all the procedures exactly then once you have flashed your CWM Recovery ( i. e. Clockworkmod recovery) Once you have installed that properly, you can now flash your new custom ROM and that should help to fully reboot your phone back to recovery for you to start using again....... hope that works for you.......just as it did for me have a good one!!... :fingers-crossed:

RVD1 said:
Sounds like you are having the same the issues i was having with my phone why dont you try this..... First you have to flash a custom recovery image for your phone, follow all the procedures exactly then once you have flashed your CWM Recovery ( i. e. Clockworkmod recovery) Once you have installed that properly, you can now flash your new custom ROM and that should help to fully reboot your phone back to recovery for you to start using again....... hope that works for you.......just as it did for me have a good one!!... :fingers-crossed:
Click to expand...
Click to collapse
He can't flash anything to his phone -__- that's the problem we are all trying to solve.

May sound stupid, but have you tried different cords? Maybe your USB cord is bad. Just a thought.
Sent from my LG-P999 using xda premium

@op can you give us screenshots of:
A: what your device manager looks like when you plug your phone in not in apx mode.
And
B: When it is in apx mode.
To do this: right click on my computer>properties>on left hand side, click on device manager. Hit print screen, open paint and tell it to paste. Save and upload here.
Sent from my LG-P999 using xda premium

EEngineer said:
CWM = Clockworkmod Recovery (everyone remember this is a newbie).
Important question: Did you do a backup before making any changes to your phone?
Also, try this: remove your phone's battery for 30 seconds. Put the battery back in. Press and hold the volume down button, then press and hold the power button. Hold both buttons. First you'll see the white LG screen, then wait, when you next see the blue LG screen wait ONE second (no longer) then release the buttons. Tell us what the phone does then and what the screen says.
Click to expand...
Click to collapse
well i brought it to two shops and were both unsuccessful. wireless toyz and smart fix. i have it back and it goes to the lg screen. and instead of the second it flashes from black to a very dim gray back and forth. when i hold the power button along with the volume down it does a master reset and i can press the home button then it takes me to a screen to delete cache partition and what not and you move up and down with the volume keys but i cannot select anything. i think i really messed my phone up.

Somehow you got stock recovery. Google for howbto do a master reset, on devices like the nexus tablet at my work there's a series of steps needed to do a full reset/restore. Just booting into stock recovery may not give you the option. As well, please post those screen shots as I said earlier, this way the issue with the USB can be troubleshot and maybe we can get you a fully working phone with CWM.
Sent from my LG-P999 using xda premium

Волк said:
Somehow you got stock recovery. Google for howbto do a master reset, on devices like the nexus tablet at my work there's a series of steps needed to do a full reset/restore. Just booting into stock recovery may not give you the option. As well, please post those screen shots as I said earlier, this way the issue with the USB can be troubleshot and maybe we can get you a fully working phone with CWM.
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
idk how to post screenshots of my phone without a camera.lol. im about ready to give up. its been way too long with not having a phone.

You hit the print screen button, open paint, and tell it to paste/paste from clipboard.
Sent from my LG-P999 using xda premium

Please help..newbie to g2x...

Just bought this fone. I hv the following problems: shut off, slow boot, freezes, slow, sometimes cannot make call and hs to reboot.
Reboot must remove battery....frustrated...
I attached a pic of fone version of sw, and fw. The fone is rooted by seller. (Ebay and long gone).
The fone has ROM manager app. Can someonerecommend what ican do from here? Is there a good working rom, i can download and install using rom manager? Thank you very much for reading.
MN.
Sent from my Transformer Prime TF201 using xda app-developers app

The sofware version is LG p999-V20c. THANK YOU.
Sent from my Transformer Prime TF201 using xda app-developers app

First off your going to need to update your baseband. The instructions are in the stickies get the march 2012 baseband and a lot of your problems will disappear
Sent from my SGH-T999 using xda premium

Hello, i think i did something wrong....
I download the basebandupdate.zip file, i used rom manager to flash. Flash process was sucessful. But then, i reboot the fone. Fone shown LG logo, but then blank on off with black screen....just stuck there.
I then remove the battery, try todo ahard reboot, power and down button, the mailbox and arrow comes up, then LG but then goes in the black screen onoff mode again.
I then remove the battery, repeat the same procedure, but then i hold the up button, the sw update logo display, with indication of "pleasewait for sw update".
From my understanding, i dont think the fone can do any update, the screen displayed the message ,but it just sit there.
Please i need help. Did i bricked my fone? Is there a solution to this? Thank you in advance.
Sent from my Transformer Prime TF201 using xda app-developers app

nguyenmd said:
Hello, i think i did something wrong....
I download the basebandupdate.zip file, i used rom manager to flash. Flash process was sucessful. But then, i reboot the fone. Fone shown LG logo, but then blank on off with black screen....just stuck there.
I then remove the battery, try todo ahard reboot, power and down button, the mailbox and arrow comes up, then LG but then goes in the black screen onoff mode again.
I then remove the battery, repeat the same procedure, but then i hold the up button, the sw update logo display, with indication of "pleasewait for sw update".
From my understanding, i dont think the fone can do any update, the screen displayed the message ,but it just sit there.
Please i need help. Did i bricked my fone? Is there a solution to this? Thank you in advance.
Sent from my Transformer Prime TF201 using xda app-developers app
Click to expand...
Click to collapse
since you mentioned you flashed it via rom manager, i assume you simply download the file and install rom manager.
basically thats a fake recovery, it is not permanent in other words. If you wish to get a permanent recovery system installed, just use the NVflasher, find it on xda or google, i am pretty sure the sticky has ALL the info you need, literally.
After you have flashed the CWM or TWRP via NVflasher, its time to follow the sticky
download the windows usb drivers, download the lg updater, download the new baseband and flash it with the emulated server (unless you are living in korea i dont think there is any updates via the official updater).
Like the other poster said, the newer baseband fixed a lot of the issues.
once again, read the stickies, it is a freaking gold mine.

nguyenmd said:
Hello, i think i did something wrong....
I download the basebandupdate.zip file, i used rom manager to flash. Flash process was sucessful. But then, i reboot the fone. Fone shown LG logo, but then blank on off with black screen....just stuck there.
I then remove the battery, try todo ahard reboot, power and down button, the mailbox and arrow comes up, then LG but then goes in the black screen onoff mode again.
I then remove the battery, repeat the same procedure, but then i hold the up button, the sw update logo display, with indication of "pleasewait for sw update".
From my understanding, i dont think the fone can do any update, the screen displayed the message ,but it just sit there.
Please i need help. Did i bricked my fone? Is there a solution to this? Thank you in advance.
Sent from my Transformer Prime TF201 using xda app-developers app
Click to expand...
Click to collapse
Also for future reference.... DO NOT FLASH ANYTHING WITH ROM MANAGER ON YOUR G2X. ALWAYS flash from cwm or twrp. Rom manager doesnt play well with our phone. Ive gotten to the point where i dont even use rom manager. I download my roms straight from xda, back up, and restore or flash any zip file from cwm. Again do NOT use rom manager to flash anything, Or you will get the problem you just described.
Sent from my Hellbound oreo cookie.