Database Info

[Q] G2x stuck at LG logo/cannot access recovery

Hey all
Before anyone mentions that i should be searching around more, i would like to say that i've been on multiple threads and they all state the same thing (use NVflash to flash CWM and then boot into CWM but the solution did not work for me past flashing CWM and then trying to access recovery after) and i wasn't able to find one that had a similar problem as mine.
I have CWM flashed through NVflash and was running CM7.1 RC1. I took a screenshot with the 'shootme' app and proceeded to look at the gallery to make sure it came out okay. The gallery crashed and i was sent to the home screen. I swiped to a different homescreen when my phone froze halfway through the transition to the next screen. No combination of buttons/long presses were able to get me out of it so i went ahead and did a battery pull. So my dilemma is that now i'm stuck at the LG boot logo with no blue status bar under it. It freezes there and will not do anything every time i boot up. volume down+power does not give me access to recovery nor does any other button combo get me past the LG boot logo.
Are there any other methods i might be able to use like ADB or what not to get myself out of this situation? or at least into recovery? Any comments or suggestions would be greatly appreciated as i've been searching for hours with little help and my eyes are starting to get strained.

hmmm.. I know it's a simple question, but I gotta ask.. are you holding the pwr and volume down button long enough? you have to keep holding it even after you see the LG screen.. Keep holding until you see the 2nd screen?
If so.. do the nvflash again? Edit: Not sure if I would do this without getting further guidance tho..

schmit said:
hmmm.. I know it's a simple question, but I gotta ask.. are you holding the pwr and volume down button long enough? you have to keep holding it even after you see the LG screen.. Keep holding until you see the 2nd screen?
Click to expand...
Click to collapse
This. I remember when I boot looped my phone I had the problem of letting go of the volume key too early, you need to hold down volume and power from a totally powered off phone until recovery actually starts and you see the green "android" logo of CWM.
Try re-flashing CWM, NVFlash CAN fail. There is literally nothing you can do within the OS that will prevent recovery from working. Either you did something wrong somewhere along the recovery process or you discovered an entirely new problem with the phone. I'm going to hazard a guess and say it's the former.

Thanks for the response guys. I wish that it was the case of not holding the buttons long enough. I have tried numerous times with the buttons held down for a long period of time. I even held the combo down for almost 5 minutes a few times.
Every time i try to boot up, it won't go past the LG boot screen so i would pull the battery out and go through flashing CWM through NVflash again. I'm sure I'm not missing anything because everything goes through and gets sent to the phone successfully.
I did happen to run into a thread that was closely similar to mine but his method was to just keep reflashing CWM and the stock recovery back and forth every time it failed until it turned on. I might have to try that if i cannot figure out this problem out soon. Not being able to use this phone is killing me! heh.

I just joined your club. Wow this sucks.

So apparently this is a whole new problem that's been found? Every other help thread seems to point to using NVflash or remaking the partitions due to a bad flash using an O2x based file instead of G2x.
But none of those solutions come close to doing anything. There has been some people with the same problem as me but aren't proactive at all enough to get someone's attention, so i'm guessing this problem is getting pushed to the side with people just going about getting their phones replaces/buying new ones.
I did happen to run into a thread on paulobrien/modaco's forum that had people using NVflash to get out of any sticky situation like this. It just reverts everything back to the stock factory settings but with root. We cannot use this though because he hasn't built it to be compatible with our LGP999's because everything was built for their UK LGP990's. Maybe that's a start to getting this solution fixed?

I hate to say this, bit you might have to call t mobile and get a replacement. Flash back to stock recovery and they won't know you messed with anything.
Sent from my Nexus 5g using XDA Ultimate App

Don't send back....you'll get same defacement a battery pull go into nvflah and go back stock then flash nv flash fix pArtitions

As I have mentioned before, NVflash does NOT give me access to my recovery let alone solve anything else. NVflash DOES work and does sucessfully send both CWM and the stock recovery but when I try to boot into either of them, let alone just power on normally, it simply DOES NOT go past the LG boot screen. it just hangs there doing nothing at all until I pull the battery out and do the same process over until it just hangs again.
while it is on/stuck at the LG screen, my computer does not recognize it so i cannot even try and run ADB commands. It does however, recognize it when I plug it in using the volume buttons held down when I use NVflash but there's nothing else I can do besides use NVflash obviously.

Jduhb said:
As I have mentioned before, NVflash does NOT give me access to my recovery let alone solve anything else. NVflash DOES work and does sucessfully send both CWM and the stock recovery but when I try to boot into either of them, let alone just power on normally, it simply DOES NOT go past the LG boot screen. it just hangs there doing nothing at all until I pull the battery out and do the same process over until it just hangs again.
while it is on/stuck at the LG screen, my computer does not recognize it so i cannot even try and run ADB commands. It does however, recognize it when I plug it in using the volume buttons held down when I use NVflash but there's nothing else I can do besides use NVflash obviously.
Click to expand...
Click to collapse
Did you ever find a solution to this issue? Because my phone is doing this...
I attempted to restore my phone back to the wrong backup that was from a galaxy sII (2.3.4 i think); needless to say, the restore failed. I then restarted my phone from CWM and it gets stuck at LG screen.
I have tried to NVflash back to stock; nothing. same thing reflashing back to CWM.
ideas?

have you tried this link out yet?
http://forum.xda-developers.com/showthread.php?t=1180331

same problem..... anybody find something to fix this yet?

From what I heard is that you need to remove the battery, then boot into recovery or something.
Sent from my G2X

Use smartflash for the p990 but only use the p999 ap.bin file which will put the rom and kernel back to stock p999.

Rom for recovery always fixes any soft brick back to stock 2.3.3 OTA. It's saved my phone multiple times from stuck on S/W screen to being stuck on lg logo or even the dreaded can't mount sdcard-cache errors in cwm.
Sent from my LG-P999 using xda premium

I used the following method when Clockworkmod became corrupted and was unable to mount my sd card. I had just wiped everything on my phone intending to install a new rom when the issue happened. I could not even get to the S/W upgrade screen. It saved my phone. Hope it works for you.
http://forum.xda-developers.com/showthread.php?p=17258229

jcbofkc said:
I used the following method when Clockworkmod became corrupted and was unable to mount my sd card. I had just wiped everything on my phone intending to install a new rom when the issue happened. I could not even get to the S/W upgrade screen. It saved my phone. Hope it works for you.
http://forum.xda-developers.com/showthread.php?p=17258229
Click to expand...
Click to collapse
omg thank you so much! It worked! Not only that but i was stuck on frodo 2.2.2 before which is why i was messing with my phone in the first place and now its on gingerbread. Awesome! thank you!!!!

sabotage99 said:
omg thank you so much! It worked! Not only that but i was stuck on frodo 2.2.2 before which is why i was messing with my phone in the first place and now its on gingerbread. Awesome! thank you!!!!
Click to expand...
Click to collapse
Glad for you that it worked.
Kwes1020 pointed me in the right direction last week. Be sure to give a thanks to ILUHA_89 who came up with the fix.

Amazing how people are soo lost without providing them link after link to other threads. They are soo lazy and can't follow simple directions, each time i get a new phone i go to that section on xda and soak up all the information as it usually is already there. It's just funny is all i guess.

d12unk13astard said:
Amazing how people are soo lost without providing them link after link to other threads. They are soo lazy and can't follow simple directions, each time i get a new phone i go to that section on xda and soak up all the information as it usually is already there. It's just funny is all i guess.
Click to expand...
Click to collapse
It's really not that big a deal. I was brand new to android once and asked all sorts of things.
I, like you, happen to read everything I can get my hands on. Some struggle going through all the info. I was here the day the forum opened, so I kind of remember where everything is.
Some are lazy and others just have no idea what the heck is going on and are intimidated by certain processes. I would rather help someone instead of listening to them ***** about their broken phone.

[Q] completely dead ns last resort please help

i flashed ics ota update along with superuser zip and all was fine, ics was running perfectly along with root access. google wallet kept forceclosing so i uninstalled it. then i decided i wanted it back to see if i could fix it. without thinking i rebooted to recovery and reflashed the update and su. when i rebooted the phone shut down and wont restart, its completey dead. it wont charge or boot at all. after thinking about it i realize i shouldnt have flashed it since i was already on 4.0 and the update was from 2.3.6 to 4.0. can anyone help me or am i screwed. please help!

Dont know if it is bricked or what, but this may help you:
http://forum.xda-developers.com/showthread.php?t=1397393
but yeah that sucks, good luck

swamp goblin said:
Dont know if it is bricked or what, but this may help you:
http://forum.xda-developers.com/showthread.php?t=1397393
but yeah that sucks, good luck
Click to expand...
Click to collapse
tried that but i get some theme error

Can you get to the bootloader?
From off, Power + VOL-UP. If you get the bootloader screen w/4 options, youre phone is not bricked.

nickmv said:
Can you get to the bootloader?
From off, Power + VOL-UP. If you get the bootloader screen w/4 options, youre phone is not bricked.
Click to expand...
Click to collapse
no does not power on at all and will not charge

OK got it to boot using unbrickable resurrector everything works great but if I power off or reboot its unresponsive again. Anyone know how to make it stick from terminal emulator. Haven't had any luck with adb or fastboot from my computer and would like to use terminal. Please help, soon close!
Sent from my Nexus S

Try flash a stock full ROM.

Si_NZ said:
Try flash a stock full ROM.
Click to expand...
Click to collapse
how? Can I do it through terminal, because I cant power off or reboot to recovery.
Sent from my Nexus S

Pm sent...

Everything fixed......thanks
Sent from my Nexus S

Please explain how you did it. I bought my phone outright and am scared to brick it.. can be us s be bricked. Can I use a Samsung jig to put in download mode since it is a Samsung Google phone??
Sent from MY Google Nexus S

navykid0211 said:
Please explain how you did it. I bought my phone outright and am scared to brick it.. can be us s be bricked. Can I use a Samsung jig to put in download mode since it is a Samsung Google phone??
Sent from MY Google Nexus S
Click to expand...
Click to collapse
The nexus s is pretty hard to permanently brick, but can be a pain depending how bad it is. This time was bad for me. I had already flashed the ics update and flashed superuser zip and all was fine except Google wallet. I uninstalled it with titanium but had second thoughts , so I decided to flash the update again. I know better but just wasn't thinking. The update was from 2.3.6 to 4.0 and since I was already on 4.0 it really screwed it up. It wouldn't do anything absolutely nothing. Apparently the bootloader , boot, and recovery images were completely gone. I did some searching and found unbrickable resurrector. Only problem was it only worked on Linux. So I had to make my laptop duel boot Ubuntu and windows. Ubuntu for unbrickable resurrector and windows for adb/fastboot. Although it sounds rather easy it took about 2 days till I finally figured it all out. I could probably do it now in 30 minutes. And a jig would most likely work but I wouldn't know where to get one. Anyway the resurrector allowed me to boot into fastboot mode and adb/fastboot allowed me to reflash the lost images. Thank God that's over!
Sent from my Nexus S

LG Optimus 2x HELP!!

Hi all,
Long time reader, first time poster.
I have a rooted LG 2x. I installed Clockworkmod from the market and installed it.
Following some guides - to boot into recover(I wanted to backup my system) I pushed Vol Down + Power, and it didnt boot into recovery.. INSTEAD.. it seems to have booted as if its factory new..!? WTF.
I checked the internal/ext SD card and the memory usage is the same.
What do I do??? I just want my old stuff back

To add to it,
I can see the folders/data in the folders through a file explorer, but for some reason it doesnt have the apps and settings?! Anyone help please?? Not sure what to do.
EDIT - Im missing all my messages as well from the inbox.. All I see are the OLD ones from the simcard..
Hopefully you guru's can help.. cos im going nuts!!!

You say you installed Clockworkmod from market and just rooted the device... You seem to have missed to install recovery and what you installed is the ROM manager and not the ROM itself, hence pressing the recovery button combo, resets the device...
Sent from my LG-P350 using Tapatalk 2

Can u boot to recovery from rom manager ?
I have a g2x btw n to flash a permanent recovery u need to use nvflash ..
sent from my g2x running hfs

Thanks guys for your replies.
my phone was already rooted.. super1click, ages ago.
I just downloaded clockwork through google market on my phone.
I read that pushing the vol down + power brings up a menu, where you can CHOOSE to have your handset wiped etc, but i didnt get it. I'm in New zealand.
Anyway, I have lost all my messages.. Im just going to flash it with CM7. Im using clockworkmod to download 7.1.0RC1 right now. I have backed up my data(or whats left of it through clockworkmod.
I will give it a go soon I guess.

So i installed cm7, and im getting the boot loop thing.
Trying to work that out. Tips?

Got CWM to recover. back to square one I guess.
I have read so many guides on how to install CM7 that im so confused now.
Can I use CWM to install CM7??

[Q] No longer able to get into recovery mode.

Hi,
I have the Asus Eeepad transformer TF101, I've had it less then a year now, and when I got it, it had been refurbished. Today I had tried to root it, and that's where it all went wrong. The root managed to go through fine, but once I rebooted it, it would not get past the first screen "the eeepad" screen. So I managed to get into recovery mode and undo the root and get it back to factory settings. I once again rebooted and it worked fine...until I went to install the most recent firmware update... the installation fails, again booted it and its stuck at the first screen again. Did another system restore, and tried to upgrade it once more, just in case it hit a glitch or something. Same thing happens, error in the middle of installation and freezes at the screen. Again tried to restore... and this time I wasn't even able to get into the mode to restore... I get the android guy with the loading bar, then the next second I get the android guy with the warning sign with an "!" in the middle of it.... It won't even let me clear the data, it just sits there with the speaker popping every 5 seconds or so. I could really use some help.

constancebwn said:
Hi,
I have the Asus Eeepad transformer TF101, I've had it less then a year now, and when I got it, it had been refurbished. Today I had tried to root it, and that's where it all went wrong. The root managed to go through fine, but once I rebooted it, it would not get past the first screen "the eeepad" screen. So I managed to get into recovery mode and undo the root and get it back to factory settings. I once again rebooted and it worked fine...until I went to install the most recent firmware update... the installation fails, again booted it and its stuck at the first screen again. Did another system restore, and tried to upgrade it once more, just in case it hit a glitch or something. Same thing happens, error in the middle of installation and freezes at the screen. Again tried to restore... and this time I wasn't even able to get into the mode to restore... I get the android guy with the loading bar, then the next second I get the android guy with the warning sign with an "!" in the middle of it.... It won't even let me clear the data, it just sits there with the speaker popping every 5 seconds or so. I could really use some help.
Click to expand...
Click to collapse
Use easy flash and restore your tablet to stock... then if you want try rooting it using the same tool... while using easy flash, read the instruction carefully...go to android development and go to easy flash forum n download the latest software n use it... good luck, if u have nay doubt then ask after reading....
Sent from my Transformer using xda app-developers app

Thank you
udupa82 said:
Use easy flash and restore your tablet to stock... then if you want try rooting it using the same tool... while using easy flash, read the instruction carefully...go to android development and go to easy flash forum n download the latest software n use it... good luck, if u have nay doubt then ask after reading....
Sent from my Transformer using xda app-developers app
Click to expand...
Click to collapse
ok thanks for the help, i'm sure i will have questions after reading.

udupa82 said:
Use easy flash and restore your tablet to stock... then if you want try rooting it using the same tool... while using easy flash, read the instruction carefully...go to android development and go to easy flash forum n download the latest software n use it... good luck, if u have nay doubt then ask after reading....
Sent from my Transformer using xda app-developers app
Click to expand...
Click to collapse
I've tried running the flash but it keps telling me that its unable to find the device.

constancebwn said:
I've tried running the flash but it keps telling me that its unable to find the device.
Click to expand...
Click to collapse
Remove all installed drivers(including Asus sync and any other Asus software) and then download and install naked driver(link is available in easy flash thread).. now plug your tablet and when it asks for driver install naked driver... if it doesn't then go to device manager on your laptop and install from there... once this is done, press power button and volume up buttons together for 5 secs and that will take your tablet into APX mode... plug the tablet back, your laptop will install APX drivers then go back to device manager and right click on the unknown device and update/install driver( same naked driver).. once you have installed required drivers its just a matter of running easy flasher...
Sent from my Transformer using xda app-developers app

PLEASE HELP! Tablet shows black screen at startup and then hangs, no boot BRICKED

Hi thanks for reading, I will tell you as quick as I can
Basically I got this Allwinner A31 Tablet Q102 and wanted to root it and flash it when I got it, so I got it only a week ago, week ago from tommorow.
I managed to root it with VRoot and then attempted to install CWM because ROM Manager would say that it isnt supported. So after tons of research I took the method of rooting an Onda tablet which was to use the ADB. I got the Recovery.tar extracted the files inside it and then did the
adb push /data/recovery.img
And stuff like that
After I did all that it told me to hold the VOL+/POWER to enter CWM, I held it for like 1 minute until CWM showed and it was working. CWM version was 6.0.2.7 I think. So I was like oh ok its working now. So then I rebooted the system using the first option CWM gave me. After it turned off it didnt turn back on. So I turned it on manually and all I see is a blank BLACK screen. Thats it. It hangs and does nothing. Cant enter Recovery, safe mode, the USB is not recognized. Infact it doesnt even connect anymore.
If I hold the power button, it turns off then once I let go it turns back on doing the same thing.
Please help me as I only just got the Tablet and can't afford to lose it. Theres too many files I need to keep, only some were moved to the SD card.
4.4.2 KitKat

addy187a said:
Hi thanks for reading, I will tell you as quick as I can
Basically I got this Allwinner A31 Tablet Q102 and wanted to root it and flash it when I got it, so I got it only a week ago, week ago from tommorow.
I managed to root it with VRoot and then attempted to install CWM because ROM Manager would say that it isnt supported. So after tons of research I took the method of rooting an Onda tablet which was to use the ADB. I got the Recovery.tar extracted the files inside it and then did the
adb push /data/recovery.img
And stuff like that
After I did all that it told me to hold the VOL+/POWER to enter CWM, I held it for like 1 minute until CWM showed and it was working. CWM version was 6.0.2.7 I think. So I was like oh ok its working now. So then I rebooted the system using the first option CWM gave me. After it turned off it didnt turn back on. So I turned it on manually and all I see is a blank BLACK screen. Thats it. It hangs and does nothing. Cant enter Recovery, safe mode, the USB is not recognized. Infact it doesnt even connect anymore.
If I hold the power button, it turns off then once I let go it turns back on doing the same thing.
Please help me as I only just got the Tablet and can't afford to lose it. Theres too many files I need to keep, only some were moved to the SD card.
4.4.2 KitKat
Click to expand...
Click to collapse
So,Wrong discussion area...Anyway
You're still under warranty,why dont you just RMA it?
just dont tell them you're rooted or anything mess with softwares.

androidvillage said:
So,Wrong discussion area...Anyway
You're still under warranty,why dont you just RMA it?
just dont tell them you're rooted or anything mess with softwares.
Click to expand...
Click to collapse
Hi, thanks for the replay, the business wouldnt replace it but they offered to have a look, I know its bricked so there is no point sending it there. I hear you can fix it in Phoenix Suite but I cant find the firmware for it.
Btw what should it be in, I had trouble sorting it lol

addy187a said:
Hi, thanks for the replay, the business wouldnt replace it but they offered to have a look, I know its bricked so there is no point sending it there. I hear you can fix it in Phoenix Suite but I cant find the firmware for it.
Btw what should it be in, I had trouble sorting it lol
Click to expand...
Click to collapse
Ok but....what is the actual model of this thing?

androidvillage said:
Ok but....what is the actual model of this thing?
Click to expand...
Click to collapse
Took ages to find out, but its called an Allwinner Q102 something with YBC, Ive heard of a similar one called Allwinner A31s Yonestoptech and was also a Q102

Hey,
What's up with your tablet? I own the same model and was thinking about installing cyanogenmod, but I have no idea yet. Have you managed to figure something out, or found any way to repair it?
Cheers!

flash ??
Try to flash the stock ROM.......

Nah man, I can't do anything with it. Turn it on just a black screen. Holding the volume down button then pressing Tue power button a couple of times makes my computer detect the tablet. But nothing else.
I cannot enter CWM, after I flashed CWM it said Can't mount boot.IMG can't Mount this and that and then I restarted it and it happened.
SO DONT FLASH ANY CWM OR ROMS ON IT.
I really want the tablet fixed man. What the hell do I do?
Sent from my HTC One using XDA Free mobile app

Try this mate
slatedroid.com/topic/40623-aml-flash-tool-aka-imageburntool/
Sent from my GT-P5210 using XDA Free mobile app

@addy187a - Did you get it done?
I have the same problem.... - I installed successfully twrp, did a backup, wiped and tried to install another rom - failed. Now I am not able to boot into recovery - it is black, not recognized by the system (so I can't use imageburntool).
It starts, is black illuminated, nothing happens, only power is possible
my device: Fusion5 F5CS 32GB, Q102, 32GB
..no idea what to do...

Hey, I know I'm 1 year late to reply but I only just logged in to XDA since ages! I know right? Anyway, the way I fixed it was to download the firmware for the tablet which I found out by keeping a note about tablet model number (Settings> About device> Model) and spent a couple minutes searching for the firmware for it. Then I used Phoenix suite or just Phoenix can't remember what it was called to flash the tablet. There are plenty of YouTube videos and instructions on the web of how to use it, I can't remember how I did it as this was over a year and a half ago! It's as simple as that and words cannot describe how relieved I felt after reviving it. If an admin sees this, please close the thread. I'm still finding out how to use this site.