Hi all,
I am new towards rooting phones and installing Roms. I bought a used Motorola XT910 today and it seemed to have a Korean version of gingerbread installed on it. As soon as I got home I downloaded the first stock Rom I could find on the internet for Asia and installed it on the phone. I followed the instructions in the below mentioned video and the phone is now completely bricked.
I just Googled " how to unbrick motorola xt910" and followed the instructions in the 6:09 video that comes up by RAZRGUY.
I've spent hours and hours on the internet looking for a solution but cannot find any. please help me. I'm getting the message now that I cannot install cos the battery is low. it won't charge and keeps booting up even when I try to shut it down.
Please help!!
raza.javaid said:
Hi all,
I am new towards rooting phones and installing Roms. I bought a used Motorola XT910 today and it seemed to have a Korean version of gingerbread installed on it. As soon as I got home I downloaded the first stock Rom I could find on the internet for Asia and installed it on the phone. I followed the instructions in the below mentioned video and the phone is now completely bricked.
I just Googled " how to unbrick motorola xt910" and followed the instructions in the 6:09 video that comes up by RAZRGUY.
I've spent hours and hours on the internet looking for a solution but cannot find any. please help me. I'm getting the message now that I cannot install cos the battery is low. it won't charge and keeps booting up even when I try to shut it down.
Please help!!
Click to expand...
Click to collapse
I can try to help you as I have an xt912, very similar but there is some difference. My Razr is CDMA/Verizon yours is GSM international.
First of all, when you turn on your phone, how far does it get? Red Moto M, then the bootanimation loops? or does it go from red moto m to black screen?
Hey,
The usual procedure is just to Hard Reset.
To do this, try
Step 1) With the phone off, Press & Hold the VOL UP+ & VOL DOWN- buttons simultaneously then while continuing to hold the VOL UP+ & VOL DOWN- buttons Press and Hold the POWER button till a menu appears.
Step 2) Use the VOL DOWN- button to navigate the menu & the VOL UP+ to select the RECOVERY option.
Step 3) When presented with a logo with an exclamation mark! Press & Hold the VOL UP+ & VOL DOWN- buttons simultaneously to bring up the next menu of options.
Step 4) Use the VOL DOWN- button to navigate the menu & the POWER button to select the Wipe data / Factory reset option.
Step 5) Use the VOL DOWN- button to navigate the menu to confirm this selection. Press the POWER button to begin the Factory Reset. (This may take a few minutes just be patient and wait.
Step 6) Once the task has completed press the POWER button to restart the device.
Source: Hard Reset Site
Or you may want to try manually flashing the original software to reset it back. You could try using flashtool.
Or You could contact the RC Help Chat 24/7
http://forum.xda-developers.com/showthread.php?t=1878241
Tell them what I said so they know where to go.
Thread Type: Can I haz Brick?
Hit Thanks if you found this useful
Silverlink34 said:
I can try to help you as I have an xt912, very similar but there is some difference. My Razr is CDMA/Verizon yours is GSM international.
First of all, when you turn on your phone, how far does it get? Red Moto M, then the bootanimation loops? or does it go from red moto m to black screen?
Click to expand...
Click to collapse
Yes it takes me to the black boot up screen. I've tried charging and the phone charges up as well! That's a good sign!
Moto razr pricked and battry low
hi gays i thing this is my first time..i have Motorola razr xt 19 running ISC 4.0.4 I tried to flash cm 10 mod via recovery i do factory reset and i
formatting system when i reboot the phone it's stock on cm10 boot, more then an hour i have try to flash the oregnal fast-boot XML zip via RDS
but it's giving me that battery low fall, and i have try to charge the but its not charging???? please gays i need your help hot to charge the battery
sorry for my bad English
Related
Hi all,
I was trying to install a new Rom Dronix 0.4. Upon entering the bootloader I accidentaly somehow no idea how,deleted clockwork mod recovery that was on there and now just can't get into bootloader mode or even get my phone to start up past the 1st screen.I've tried volume up +green button and power button to try to get in,volume down + end call red button and power button no go.The only thing it goes into is if I hold the volume down button + call green button and power which takes me to the firmware update but just flashes and says unpack failed.The other thing is that if press the red and green buttons for calls and the power button it brings the screen to a purplish colour but does nothing as well.I've tried to get the computer to recognize the phone but it won't even after installing the usb drivers with windows xp and windows 7.Atm there is no ROM on the phone after deleting it,cache and dalvik cache. It's just empty with not even a bootloader to try and boot into, only hardware is available now.
I'm at a loss as to what and any help if trying to get it back and running would be appreciated.
Thanks,
Paul
Flash UltraJack recovery from the PC.
http://forum.xda-developers.com/showthread.php?t=908178
hello, i think you kinda deleted the boot!!
try following instructions on this
http://forum.xda-developers.com/showthread.php?t=1011527
ITS SAYS UPDATE FAILS CUASE YOU DONT HAVE THE FIRMWARE on YOUR SD CARD>>>DO YOU???? JUST GO TO THEAD AND FOLLOW INSTRUCTIONS AND LET ME KNW!
YOU SIR ARE A CHAMPION!!!!!!!! If ever you are in Sydney, Australia I'll be treating you a few beers if you do drink heh.
Again THANK YOU!!!!
Hi!
I have a big problem, hope that someone can help me, I have a motorola fire xt316 with android 2.3.4 installed on it, I succesfully rooted my device following this tutorial
HTML:
http://forum.xda-developers.com/showthread.php?t=1218506&page=2
.
After rooting my device I have install 'rom manager', an application on android market that lets you backup your rom, when I tried to backup it the phone shotdown.
Now my device won't start, I pulled out the battery and the sim card, even the SD card and tryed to start it again, no result, when I say no result I mean that the phone doesn't show the moto logo, nothing, just the standard soft buttons light up and the they turn off, I tried to press the POWER button while putting the battery on and the same thing, only this time it vibrates, I have tried the volum up and down, still nothing, just the vibrate and the lights of the buttons then nothing.
When I connect it to my computer, after pressing the power button, my windows 7 searches for a driver, the driver is called "Flash MSM7227" and didn't find it.
I don't know wath to do, pleas help me, I'm despret!
You bricked your phone, there is no way to help you. Sorry, I know it isn't good news.....
Hit that thank button if I helped!
and if I have the warranty, will they fix it, or figured it out that is my fault?
It is considered your fault, they wont replace sorry.
Hit that thank button if I helped!
You could try though.
Hit that thank button if I helped!
XandrUu said:
Hi!
I have a big problem, hope that someone can help me, I have a motorola fire xt316 with android 2.3.4 installed on it, I succesfully rooted my device following this tutorial
HTML:
http://forum.xda-developers.com/showthread.php?t=1218506&page=2
.
After rooting my device I have install 'rom manager', an application on android market that lets you backup your rom, when I tried to backup it the phone shotdown.
Now my device won't start, I pulled out the battery and the sim card, even the SD card and tryed to start it again, no result, when I say no result I mean that the phone doesn't show the moto logo, nothing, just the standard soft buttons light up and the they turn off, I tried to press the POWER button while putting the battery on and the same thing, only this time it vibrates, I have tried the volum up and down, still nothing, just the vibrate and the lights of the buttons then nothing.
When I connect it to my computer, after pressing the power button, my windows 7 searches for a driver, the driver is called "Flash MSM7227" and didn't find it.
I don't know wath to do, pleas help me, I'm despret!
Click to expand...
Click to collapse
Have you tried to load the bootloader?
Just press VOLUME +, VOLUME - and PWR at the same time and wait. (Until 'Enter recovery mode' message appears).
If don't appears, i think you bricked your phone, because you tried to do something very wrong. If this method don't work, send your phone to MOTOROLA and wait. There's the only thing to do.
So have you already revived the phone?
If not, do the following:
Press and hold CAMERA and VOL- buttons simultaneously
Connect USB cable
Phone will be detected as Motorola Flash Interface. And you will get the ability to flash it. It was tested by me.
mcandre said:
So have you already revived the phone?
If not, do the following:
Press and hold CAMERA and VOL- buttons simultaneously
Connect USB cable
Phone will be detected as Motorola Flash Interface. And you will get the ability to flash it. It was tested by me.
Click to expand...
Click to collapse
i have same problem (Flash MSM7227B driver not installed)
but ''mcandre'' say true
it's really working, very very thanks ''mcandre''
Hi
After being on numerous custom Roms for the xoom I decided to return to stock and was succesful in return to the 3.01 stock image for the wifi MZ604 model
I was also successful in relocking the xoom.
I then began to receive the offical updates though everytime the were applied I had to go into recovery and wipe the device as otherwise it would bootloop on the dual core screen.
On the last update that it received and that was installed , on rebooting nothing happend and the screen just went blank
No combination of volume up + power would show any sign of doing anything.
After leaving the tablet to the side for awhile I noticed it came up with the following
model mz604 : Revision0 (0x8000) modem none
InitBl Info function failed with codes 299/3
failed to boot 0x0001
starting RSD mode 3
one wire : charger is not connected or battery is not being charged
battery charge level : 56%
I tried fastbooting and adb at this point but no devices are found. However when plugging in the xoom my laptop recognises something is attached.
After some searching I found out about RSd lite and SBF files.
When opening rsdlite v5.6 (running as admin) the tablet is recognised and I have now attempted to use two sbf files
HUBWF_W5.H.6.4-20_SIGNED_UCAHUBLWFRTCOREEU_P010_A010_M004_HWwifi_hubble_AP1FF.sb f
and
HUBWF_W5.H.6.2-24_SIGNED_UCAHUBLWFRTCOREEU_P006_A006_M003_HWwifi_hubble_Service1 FF.sbf
however both fail when it attempts re numeration.
I would greatly appreciate any help that anyone could give on this
Thanks
Try this.
My mom's Xoom had a similar problem. Reboot the tablet by pressing Volume Up and Power.
Then quickly turn on the xoom and press the down button as fast as possible, and continue pressing until you see "Recovery Mode" (or something similar) on the top left of the screen.
Once you see that, press the volume up button. Quickly, when you see the Android guy with the exclamation mark tap the power button and the up button.
This will take you to recovery mode. In there use the up and down volume keys to navigate and the power button to confirm things.
Go down to restore/delete data (may vary) and press power. use the volume down key to scroll to Yes.
This will restore your tablet back to factory settings. If you're trying to backup your data, don't try... No such luck and you won't be able to without the tablet booted.
thanks for the reply but this didnt work. Tried quite a few times. The screen just goes blank and again after a long while the error shown in the op appears. Should add there is no Motorola logo showing.
I have also tried forcing fastboot by the instructions found in other similar threads but again this does not work.
I think my best bet is the SBF files , but need to understand why this is failing on re-numeration
Hey guys, I used FlashTool and something went wrong. Ever since, My phone will only be a black screen when its turned on and I can't go into recovery mode. I can't work out how to restore it without. Please Please Help!?!?!?
Flas again with flashtool.
Before flashing press and hold power and volume up buttons together and hold about 10 seconds untill phone vibrate three times.Than star flashtool,hit flash and when you pop up windows show press and hold volume down button and connect phone to cable and flashing will succed.
Allek84 said:
Flas again with flashtool.
Before flashing press and hold power and volume up buttons together and hold about 10 seconds untill phone vibrate three times.Than star flashtool,hit flash and when you pop up windows show press and hold volume down button and connect phone to cable and flashing will succed.
Click to expand...
Click to collapse
Just did another one, Now the on button does nothing. My phone just won't turn on...
A couple of things that may help here
What model is your phone and what did you flash?
Please try and help us help you and let us know what you did
gregbradley said:
A couple of things that may help here
What model is your phone and what did you flash?
Please try and help us help you and let us know what you did
Click to expand...
Click to collapse
Its the D6603, I flashed a Marshmallow firmware, Then tried the stock firmware in order to fix it.
This morning all its doing is showing battery dead symbol despite being charged all night.
Jolbol1 said:
Hey guys, I used FlashTool and something went wrong. Ever since, My phone will only be a black screen when its turned on and I can't go into recovery mode. I can't work out how to restore it without. Please Please Help!?!?!?
Click to expand...
Click to collapse
Great New, I got it working again, Seems like battery life may have been a key issue here. Its loaded up, but got stuck on the blue musical bit and made some horrific beeping noise and keeps rebooting. Any help? I can't seem to get into recovery mode, Maybe thats just my method.
I have a boost mobile LG Stylo that I rooted last November using 6th_Hokage's custom room method provided here http://forum.xda-developers.com/lg-g-stylo/development/boost-stylo-5-1-1-zv5-custom-rom-v1-t3216307 on this forum. I used the rooted-zv5-system.img file. All has been well for 7 moths until last night when I was using Google Chrome and the app hung (which happens occasionally, not frequently). Had to pull and reinstert battery and upon booting, I am getting in this weird loop of Setup/Activation Wizard - Wifi Connect - and TalkBack Activation that I cannot get out of. HOME and RECENT SCREENS buttons are disabled, BACK button is enabled. I am assuming some corruption took place.
Can anyone point me in the direction of steps to take on resolving this? I am good either going back to factory or root, I just need my phone working. I have reviewed this forum, and am confused on best option on how to proceed, or do I have a permanent brick.
Thanks so much in advance for the assistance!
I'd reset it from recovery mode. I reset my phone whenever it acts wonky. When you do reset it in recovery do it like 3 times like you are clearing it out to put in a rom. If all else fails you can at least flash the rooted rom or original rom again, Good Luck! At least you have root, I'm on 6.0 and no root sux big time!
jmacie said:
I'd reset it from recovery mode. I reset my phone whenever it acts wonky. When you do reset it in recovery do it like 3 times like you are clearing it out to put in a rom. If all else fails you can at least flash the rooted rom or original rom again, Good Luck! At least you have root, I'm on 6.0 and no root sux big time!
Click to expand...
Click to collapse
Thanks so much. Cool, I hope it is an easy fix. Because I am pretty much a noob with this stuff, I have never "cleared it out" to put in a rom. I might have done it, but do not recall. I will have to review my process steps again to make sure. Any chance you can provide some step by step instruction that I can follow with regard to resetting and clearing out from recovery mode?.
Here are the steps I found online, does this look correct to you...a hard factory reset? Is this ok even with rooted phone?
Hard reset LG G Stylo
Turn off the device
Press and hold Volume Down key + Power Key about 6-7 seconds
Release Power key when LG logo appear
When still pressing Volume Down key, press Power key one more
Release Volume down key when Factory Data Reset menu appears
Use Volume key to select “Yes”
Pres Power key to confirm.
I do still have the rooted rom I originally used and instructions from 6th_Hockage...are you saying that if I just flash that again following the steps I used to originally root the phone that this will work even though the phone is already rooted?
Thanks!
Turn off the device
Press and hold Volume Down key + Power Key about 6-7 seconds
Release Power key when LG logo appear AND it says "Recovery Mode"
You'll get a recovery menu and you use the volume up and down keys to highlight the "factory reset" after highlighting "factory reset" press the power key to activate selection. Do that three times and you will have a clean slate of your rooted rom.
You don't have to re-flash the reset will be the rooted rom
Did it work???
Sent from my N9521 using Tapatalk