Database Info

Proscan PLT 7035B - connect to PC, upgrade to JB and rooting with Play Store

Details of how to connect to PC, upgrade to JB and rooting with Play Store in posts #3 and #4.
I came across this tablet during the holiday season sale at P C Richard and Son (don't see them carrying it anymore). Found it to be a great deal for 59.99 USD (+tax) since it looks like it has a lot of potential for so cheap a tablet.
The one I am currently playing around with is the last of the 5 that I had picked up as gifts for others (and this one will be reaching the recipient soon).
When searching the web for more info, could practically find none. Most of the stuff I saw online was desperate queries of folks struggling with this model - Proscan PLT7035-B from Curtis Intl..
I love the Jelly Bean on my Nexus 7 and the Note II - and so was just trying to put together a sort of guide of the great work you folks have been doing here at XDA that will immensely help those who seek them for this particular make/model.
Product details:
Model #: PLT7035-B
Processor: Rockchip 2906
1.2 GHz processor
7" capacitative touch screen
ICS 4.0.4
4GB flash memory (expandable up to 32 GB with micro SD card)
512 MB ddr3 RAM
Front facing camera
800 x 480 resolution
Wifi 802.11 B/G/N
Pre-loaded GetJar app
Kernel version
3.0.8+
[email protected] #260
Build number
rockchip
rk29sdk-eng 4.0.4_20121114
Click to expand...
Click to collapse
In the next couple of posts, will try my best to explain in detail the steps that I took to upgrade my tablet from ICS 4.0.4 to JB 4.1.1 and successfully root as well as have CWM installed along with Google Play store.
Cheers

Now before we get into details about flashing etc. link below is a nice "guide" article about the various terminologies like what is a Bootloader, custom ROM, Kernel, CWM, Firmware, Flashing, ADB, Root etc.
http://androidforums.com/4657640-post1.html
Click on the above link - a must read for newbies.
Now the Statutory warning: Follow all the remaining steps in this thread at your own risk. It worked fine for me - so neither the forum or me are liable in any sort of way for any damages whatsoever that you may bring upon yourself.

Jelly Bean 4.1.1 Update:
Proscan Model Number PLT7035-B has it on their official site:
http://proscanvideo.com/item.asp?itemnmbr=PLT7035-B
Firmware:
-------------
4.0
http://www.curtisint.com/html/custservice/manuals/PRO_PLT7035-B_FIRMWARE_4.0.ZIP
4.1
http://www.curtisint.com/html/custservice/manuals/PRO_PLT7035-B_FIRMWARE_4.1.ZIP
Manual
http://www.curtisint.com/html/custservice/manuals/PRO_PLT7035-B_ENFR.PDF
As always - statutory warning - neither me nor the forum are liable for any damages to your tablet - do it at your own risk - no one other than you alone is liable for any damages arising from the usage of this guide.
How to upgrade the firmware after downloading it from above link:
Get the RKBatchTool
First of all - ensure that your tablet is FULLY charged.
Unzip the RKBatchTool v1.5 to your desktop
Turn off the tablet and disconnect from the PC.
Now press the Volume Up (+) button and keep holding it down.
Here comes the slightly tricky maneuver - you have to keep pressing the volume UP (+) button and connect at the USB at same time in to the PC. The tablet will power up on it's own but the screen will remain blank
Once the PC starts searching for the driver, you can release the volume button.
Windows will prompt you for drivers for "RK29 device".
Use appropriate drivers from the driver folder.
Have attached some pictures collected from the web (it is just to give a visual idea as an aid to the walk through and may not be detailed nor accurate in every aspect since some of them are from instructions for other devices).
Run the RKBatchTool v1.5.
Click on first button at the left bottom end of the tool screen - this is a toggle for Chinese/English versions.
In the "FW Path" load the update.img file by clicking on the top right side button with the three ... dots
The following will appear in the status box after the "connected devices" box turns green.
Loading firmware...
Loading firmware Finished.
I clicked "Upgrade" (even though the picture says restore).
Your previously green colored box of "connected devices" will now keep flashing in yellow.
Sit back and have fun watching the status box - will probably take a couple of minutes for the whole process and verification.
When it is all done with - the tablet will reboot.
Remember that the first boot would take a longer time than usual powering up time - so just be patient.
All the best.
Image credits : Dave S:
Attached below are the pics from Proscan site Powerpoint.

I have successfully rooted it twice and installed Play Store (once with ICS and now with JB)
First time it was with help of amjtech thread [Tutorial] Proscan PLT-7035-PL Root and install GAPPS
Now I tried the [RK29][TOOL] Root RK29 Tab Toolkit since the sdk was already installed.
Very simple and super effective rooting process.:good:
The first time when I ran in to driver installation issues it was pertaining to permissions.
Found work-arounds elsewhere and also had issues with the installing google playstore.
Hence used the Vending 3.9.16.apk from thread [Share] Google Play 3.10.10 [Updated 14.12.12] to resolve it.
Installing CWM was also a breeze - thanks to the great work of fun_ . It is a simple process if you follow his guidelines :good:
He has been very kind to upload an exclusive CWM-based Recovery image for ProScan PLT7035-B (ext4)
Click above link to d/l it and follow installation instructions
--------------------------------------
Precautionary measure - the following is just in case something goes wrong and you want to revert back (and also to have a copy of original images) :
I used the romdump technique and following Oma's suggestion have created the kernel, boot, recovery and system images in SD card for ICS 4.0.4 of Proscan PLT7035-B
http://www.4shared.com/zip/UtCs-yCE/Proscan_PLT7035-B.html
Above link upload to 4share is exclusively for the Proscan PLT7035-B (ICS 4.0.4) and hopefully has not been corrupted because my internet connection has been flubbing for past few days.
Have fun and remember to use caution because you alone are responsible if you brick your device.
Cheers

yes ok
vulcanize said:
I came across this tablet during the holiday season sale at P C Richard and Son (don't see them carrying it anymore). Found it to be a great deal for 59.99 USD (+tax) since it looks like it has a lot of potential for so cheap a tablet.
The one I am currently playing around with is the last of the 5 that I had picked up as gifts for others (and this one will be reaching the recipient soon).
When searching the web for more info, could practically find none. Most of the stuff I saw online was desperate queries of folks struggling with this model - Proscan PLT7035-B from Curtis Intl..
I love the Jelly Bean on my Nexus 7 and the Note II - and so was just trying to put together a sort of guide of the great work you folks have been doing here at XDA that will immensely help those who seek them for this particular make/model.
Product details:
Now before we get into details about flashing etc. link below is a nice "guide" article about the various terminologies like what is a Bootloader, custom ROM, Kernel, CWM, Firmware, Flashing, ADB, Root etc.
http://androidforums.com/sony-erics...om-kernel-cwm-firmware-flashing-adb-root.html
Click on the above link - a must read for newbies.
Now the Statutory warning: Follow all the steps at your own risk. It worked fine for me - so neither the forum or me are liable in any sort of way for any damages whatsoever that you may bring upon yourself.
-----------------------------
I have successfully rooted it and installed Play Store with help of amjtech thread [Tutorial] Proscan PLT-7035-PL Root and install GAPPS
Ran in to driver installation issues and found work-arounds elsewhere and also with the google playstore from above link.
Used the Vending 3.9.16.apk from thread [Share] Google Play 3.10.10 [Updated 14.12.12] to resolve it.
Installed CWM using steps from thread [CWM] CWM-based Recovery for RK3066/RK2918 devices with the help of fun_
----
I would love to have a suitable kernel on this Rockchip based model to flash Oma's JB.
Any ideas/suggestions????
Thanks in advance.
Cheers
Click to expand...
Click to collapse

Rooted stock Jelly Bean 4.1.1 with Play store screen shot from the Proscan PLT7035-B with RK2906
Details of how-to in the third and fourth post from top.

A BIG THANK YOU TO Oma7144 :good:
RK2906 Tab Proscan PLT7035-B now joins his list and rocks with Jelly Bean Custom Rom! Click here if you want to try it out.
Am loving it.
Thanks to him the Kernel for the PLT7035-B can be found here
Or click here for direct download.
Looking foward to the stable CM10 version.
Cheers.

This is an update from my end with regards to the JB 4.2.2 Multi-Window by Oma on the RK29
http://crewrktablets.arctablet.com/?p=1661
Check it out
------------------------------
There is also a Second Test Build CM10.1 (Thanks Oma) on Proscan PLT7035-B
Tried the CrewRKTablets_RK29_Loox_CM10.1_4.2.1_20130113.7z along with CrewRKTablets_Format NAND.zip with the custom kernel made by him on his ICS thread.
Am very happy to say it is working great so far except for the spotty wi-fi at times and also screen rotation (needs sensor/rotation calibration).
Please remember that it is still a test build.
Cheers.

pondering
Before I try something dumb was pondering if the update will work on 7035 pl. would love to have jb on it, and maybe get a little better battery life. There is so little info out for the pl. thanks for any help you can give.

crhm said:
Before I try something dumb was pondering if the update will work on 7035 pl. would love to have jb on it, and maybe get a little better battery life. There is so little info out for the pl. thanks for any help you can give.
Click to expand...
Click to collapse
NO!!!!
It is meant for the 7035-B. Someone else flashed the wrong ROM and the message is quote below.
capfl2k5 said:
Proscan/Curtis PLT7035-PL
Sooo I had a moment of derrrr and flashed the jellybean upgrade for the PLT7035-B to my 7035-pl. Boots up (quickly I might add) and goes to the lock screen but I have no touch control over the screen. Does anyone have an image of the original firmware for this tablet? Or any Idea on how I can regain control of the touch screen?
Source: http://androidforums.com/general-tablet-talk/682172-proscan-curtis-plt7035-pl.html
Click to expand...
Click to collapse
But you can do all the rooting and install CWM along with playstore as mentioned in post 4 since fun_ has a generic CWM on his site.
http://forum.xda-developers.com/showpost.php?p=37221496&postcount=4
Would also appreciate it if you could kindly do a romdump of your 7035-PL and host the Boot, Recovery And System Partition Images to help people like capfl2k5 whose post from another forum is quote above.
Also try requesting Oma for a suitable kernel in his JB custom rom thread http://forum.xda-developers.com/showthread.php?t=1903745 and you will be all set. I really like that rom he has built.:good:
And then you could also try the CM 10.1 with that same kernel

I will see what I can do . I have su already but did not have any luck with with Google play I will try again later
Sent from my PG06100 using Tapatalk 2

crhm said:
I will see what I can do . I have su already but did not have any luck with with Google play I will try again later
Sent from my PG06100 using Tapatalk 2
Click to expand...
Click to collapse
As mentioned in post # 4 in previous page
Download the Play store apk
How to install:
Rename it to Vending.apk
Paste it in system/app
Change permissions to rw-r--r--
Reboot if needed
http://forum.xda-developers.com/showpost.php?p=32731467&postcount=1
Courtesy: Kakashi Hatake

I will look for a place to put those files, boot ,recovery, and system. Got a chance to to do a romdump. Now to move on to a recovery for cwm. I am getting to old for this stuff fingers dont work like they used to.lol
Sent from my PG06100 using Tapatalk 2

crhm said:
I will look for a place to put those files, boot ,recovery, and system. Got a chance to to do a romdump. Now to move on to a recovery for cwm. I am getting to old for this stuff fingers dont work like they used to.lol
Sent from my PG06100 using Tapatalk 2
Click to expand...
Click to collapse
Great.
Hope you followed Oma's advice for the romdump images.
http://forum.xda-developers.com/showpost.php?p=35298423&postcount=462
As for CWM - it is very simple and straightforward thanks to the great work by fun_
http://forum.xda-developers.com/showthread.php?t=2102679
Clicking the link at the top of his post will take you to his site where there is a nice walkthrough.
Now the proscan PLT7035-B that I have currently is running on the custom rom - Oma Odys Loox JB 4.1.1 V1.2.3a and I might have just enough time with the tablet to make it to 4.2.2 version.
Cheers

Have been using Orange Backup (by snoopy33) on the proscan and loving it.:good:
Playstore:
https://play.google.com/store/apps/details?id=com.pommedeterresautee.twoborange3
xda:
http://forum.xda-developers.com/showthread.php?t=2040507
Suits the need of lazy folks like me

crhm said:
I will look for a place to put those files, boot ,recovery, and system. Got a chance to to do a romdump. Now to move on to a recovery for cwm. I am getting to old for this stuff fingers dont work like they used to.lol
Sent from my PG06100 using Tapatalk 2
Click to expand...
Click to collapse
I see that you have posted the image dump on mediafire
http://forum.xda-developers.com/showpost.php?p=38400364&postcount=53
Am just putting it up here in case anyone with the PROSCAN PLT7035-PL stumbles across this thread in search of the stock recovery, kernel etc.
crhm said:
I put the plt 7035-pl files on mediafire. I hope it helps. Iam trying to build a recovery file for cwm. I hope to make a little progres there soon.
I will try and help when I can. I just have to quit thinking webos and maybe it will go faster.:good:
Recovery.img
http://www.mediafire.com/view/?5v04gu0c2ow8cx1
Kernel.img
http://www.mediafire.com/view/?6ztdrpr217h1dos
Boot .img
http://www.mediafire.com/view/?tt9fdttjxankm1i
Click to expand...
Click to collapse
Cheers.

Ubuntu Installer for Android
Was wondering if this cheap dual core tab could handle Ubuntu and used the app from following link to install an older version of Ubuntu
http://www.mediafire.com/?5ru3tzddteciahd
Process is very simple and the app gives a detailed walk through. Am in the process of upgrading the versions now
Kudos and all credits to the original devs because I saw it on a site that did not name them.
For newer version of the install app visit the linux on android website:
http://linuxonandroid.org/downloads/
Cheers.

vulcanize said:
I see that you have posted the image dump on mediafire
http://forum.xda-developers.com/showpost.php?p=38400364&postcount=53
Am just putting it up here in case anyone with the PROSCAN PLT7035-PL stumbles across this thread in search of the stock recovery, kernel etc.
Cheers.
Click to expand...
Click to collapse
Just a mirror created for the PLT7035-PL kernel, boot and recovery images (originally posted by crhm)
https://www.dropbox.com/sh/hxky38cnck1m0oq/GXvk4Onc9F

JB 4.2.2 on the Proscan PLT7035-B
Unofficial AOSP 4.2.2 on rk29board ! thanks to Oma
http://forum.xda-developers.com/showthread.php?t=2162760
:good:

As soon as I get my recovery fixed I was thinking of using a copy of recovery and port it to mine fix it where it could be flashed with rktool if need be
Sent from my Galaxy Mini (SGH-T499) using Tapatalk 2

One Click Root Method for Jelly Bean 4.1.2 Leak 1,2 & 3

What - This is a "One Click Root" Method instead of Swapper Method and works for Official Stock Jelly Bean leak 1,2 & 3
Where - See these two links :
Info link - http://bbs.angeeks.com/forum.php?mod=viewthread&tid=2509099&highlight=%D2%BB%BC%FCROOT
Download link - [http://pan.baidu.com/share/link?shareid=210536&uk=3926112336
How - Just double click the 双击我RunRoot+SUPERSU.bat file and wait for things to happen. (双击我 - translates as double click me) Make sure to have adequate battery level before executing.
WARNING & DISCLAIMER - This is just a information post, I have tried this myself and has worked for me and please flash this entirely at your own risk. I assume no responsibility of any nature of damage to your phone if any after flashing this.
Credits - User with whom I interacted for this info, Wanngjghost for JB 4.1.2 leak, Atrix 2 community developers & contributors for everything in general, Motorola for Atrix 2
Mirror @ post # 21
Specifically regarding Leak 3 (contribution by user _ghiottone as below to this root process)
Quote
For Leak 3 it's work, but the boot.img need to change, because, the kernel not the same version (the build number 3.0.8 too, but the additional data/name aren't equal) .
This .zip contains the leak 3 boot.img:
https://docs.google.com/file/d/0Byxxmki63A2zWVp4SlNpMUxoVjQ/edit?pli=1
All credits goes to RAD7, i change only the boot.img files.
Please click Thanks if you found this helpful.

Thanks for sharing.
Works :good::good:

nishant203 said:
Thanks for sharing.
Works :good::good:
Click to expand...
Click to collapse
So Nishant as confirmed by you it works. I believe you used this on leak 1, correct?
I mean the swapper root method was something else (pulling out battery et al) What was that thing about script runs fully in Chinese (as long as it works, no complaints though)
Today has been a great day for Atrix 2 - One click root method, 3 (T.H.R.E.E) ROM's based on JB 4.1.2, WOW, YAY..Loving it
I just wish Whirleyes gifts us BMM latest version having full support for Edison (I recall him mentioning Edison is not fully supported as the code of BMM is based off Spyder {hope i mentioned that right}) then we are set to rock with having JB 4.1.2 leak 1 as main system & three JB based roms simulataneous install option using BMM

All the text written in batch files is in Chinese so..... I'll say just blindly press any key when asked and you are rooted
Ya used it on leak 1..

Rooting on JB just easier
I have tried this out it is just so EASY to root our JB phone. Thanks to everyone who wrote the script and shared it. Thanks a ton...
I would say it has reduced the HASSLE of starting the phone in AP Fast boot mode rebooting it and then using all the commands. (No issues for the earlier method as it was really great)

Mods - Sticky please?
Mods - Sticky please? :fingers-crossed:

ravvio said:
I have tried this out it is just so EASY to root our JB phone. Thanks to everyone who wrote the script and shared it. Thanks a ton...
I would say it has reduced the HASSLE of starting the phone in AP Fast boot mode rebooting it and then using all the commands. (No issues for the earlier method as it was really great)
Click to expand...
Click to collapse
Glad
Guys please someone also confirm if rooting with one click is ok for leak 2 as well, just for everyone's clarification. Cheers!

I'll use this the next time

Busy Box part of root install??
Deleted

RAD7 said:
Does this root method work for each of the three custom ROM's??
Besides above, also can anyone confirm if this method installs Busy Box as part of the root?? If yes then version & author please.
Click to expand...
Click to collapse
You need not to root custom rom. You are installing them on phone which is already rooted
No it does not install busybox.
---------- Post added at 02:08 PM ---------- Previous post was at 01:20 PM ----------
RAD7 said:
Glad
Guys please someone also confirm if rooting with one click is ok for leak 2 as well, just for everyone's clarification. Cheers!
Click to expand...
Click to collapse
Also Works on leak 2

Do I need to install anything else for rooting thru one click? I double clicked the file but the mobile entered into flashboot mode and I had to reflash the rom to restart it.

Mode of connection
Can anyone please specify in what mode shall I connect the phone? MTP/ mass storage/ Fastboot??

[email protected] said:
Can anyone please specify in what mode shall I connect the phone? MTP/ mass storage/ Fastboot??
Click to expand...
Click to collapse
Connected MTP wth usb debugging on.. SU indtalled.. works perfectly. Thanks to the OP

Hope it works for me also after upgrading to jellybean

SuperSu update is possible
FYI - After rooting if you get update for SuperSU in Playstore go ahead & do it as it updates successfully without any issues.

RAD7 said:
What - This is a "One Click Root" Method instead of Swapper Method which is in the Stickied in particular for Leak 1 of JB 4.1.2 by Wangg (don't know if it works for leak 2)
Where - See these two links :
Info link - http://bbs.angeeks.com/forum.php?mod=viewthread&tid=2509099&highlight=%D2%BB%BC%FCROOT
Download link - [http://pan.baidu.com/share/link?shareid=210536&uk=3926112336
How - Just double click the 双击我RunRoot+SUPERSU.bat file and wait for things to happen. (双击我 - translates as double click me) Make sure to have adequate battery level before executing.
WARNING & DISCLAIMER - This is just a information post, I have tried this myself and has worked for me and please flash this entirely at your own risk. I assume no responsibility of any nature of damage to your phone if any after flashing this.
Credits - User with whom I interacted for this info, Wanngjghost for JB 4.1.2 leak, answersamir for the swapper root method, Atrix 2 community developers & contributors for everything in general, Motorola for Atrix 2
Please click Thanks if you found this helpful.
Click to expand...
Click to collapse
Hye how you oc 1.2 ghz? can u tellme? i try all method but no success.

afeeq said:
Hye how you oc 1.2 ghz? can u tellme? i try all method but no success.
Click to expand...
Click to collapse
Offtopic for this thread, many threads for OC in A2 forums, try detailing steps what you have done for OC which did not work & can revert accordingly in Troubleshooting & Q&A section. Not being rude but just sticking to thread topic.Cheers!

RAD7 said:
Offtopic for this thread, many threads for OC in A2 forums, try detailing steps what you have done for OC which did not work & can revert accordingly in Troubleshooting & Q&A section. Not being rude but just sticking to thread topic.Cheers!
Click to expand...
Click to collapse
I ask in the right forum but no answer. So, i saw your tag using 1.2 ghz. I want to ask your help. I using this http://forum.xda-developers.com/showthread.php?t=1988411 but still no luck. So, if you have other method please tell me the step. I search all forum but still did get any luck. Please help me..

afeeq said:
I ask in the right forum but no answer. So, i saw your tag using 1.2 ghz. I want to ask your help. I using this http://forum.xda-developers.com/showthread.php?t=1988411 but still no luck. So, if you have other method please tell me the step. I search all forum but still did get any luck. Please help me..
Click to expand...
Click to collapse
I meant this thread is only about One click root, you could have posted your query in the link what you sent me as below. See post # 137 in that same thread where I myself had asked question about how to overclock but now I OC on the fly to my choice ranging from 1 ghz to have gone max up to 1.4 ghz. Will post you the details in new thread in General forum for you & all our buddies who would like to read & try but out right now, check later. Cheers!

Hi,
This is awesome...
Can someone please post a mirror...??
Its downloading at 0.5 kbps...
--
Thanks in advancce,
Karthik

[Q] [help] i want to flash gapps

hello i have problem in my device google play services same user id
and i searched about this problem in this site i found you must flash gapps
but the problem is my mobile not have recovery mode so
can i flash gapps normal with sp flash and how to make it ?

Some more details would be helpful: Brand, Model, ROM?

hello man
sandm4n said:
Some more details would be helpful: Brand, Model, ROM?
Click to expand...
Click to collapse
rom : magcomm77_cu_ics2
model : i9500
alps
ram 500
4.2.2 but i think is fake
kernel version 3.4.5-i9500zskj6-cl679970
i flashed this rom and its worked for my phone ( attached link )

up

up

up

I don't want to be a prick, but you should only up a post once per 24 hours as in forum rules.

[Q] MP 809t

I bought a MP 809t Smartphone. Are there any CWM and ROM for this phone? It runs android 4.3.0 from fabric, maybe AOSP, In "about phone" update is not listed.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Android 4.4.2
I have stock Android 4.4.2 KitKat

4.4.2 ROM
Can you please upload the ROM, so that we shall benefit. I have a problem. I bought MP809T in Abu Dhabi, UAE. There it used to recognize the SIM and was working. But now I am in India and no SIM working. I am not sure whether the current ROM 4.3 does not support this region or so. Please help.
Also if someone can guide on how to install this stock ROM 4.4.2, it would be of gr8 help.
Thanks,
Joe
reshi5531 said:
I have stock Android 4.4.2 KitKat
Click to expand...
Click to collapse

Installing ROM MP809T
spljoe said:
Can you please upload the ROM, so that we shall benefit. I have a problem. I bought MP809T in Abu Dhabi, UAE. There it used to recognize the SIM and was working. But now I am in India and no SIM working. I am not sure whether the current ROM 4.3 does not support this region or so. Please help.
Also if someone can guide on how to install this stock ROM 4.4.2, it would be of gr8 help.
Thanks,
Joe
Click to expand...
Click to collapse
Hello spljoe,
I will write you how to install ROM to your phone. First download links to ROMs:
1. Stock pre-rooted ROM Android 4.3.0 - needrom.com/download/official-factory-rooted-rom-android-4-3-0-mtk6582-for-mpai-809t/
2. Stock non rooted ROM Android 4.4.2 - needrom.com/download/official-factory-rom-android-4-4-2-kitkat-mtk6582-for-mpai-809t/
I prefer personally 4.3.0 because is pre-rooted and rooted apps works perfectly!
Now you need to download this files: mediafire.com/folder/w0dh4b4h854mqq6,e22d2b5foep12ty,em36kke7pwkwphf/shared
1. Install PDA drivers from file;
2. Now open MP809T mobile phone flash steps Android 4.4.2.doc and follow instructions;
First you have to know that there is 2 different LCD screens for MPai 809T. You have to choose witch driver to install for your LCD. For 4.3.0 ROM you have only 1 option for LCD! If after flashing you start the phone, but can not see the logo, that's means wrong LCD driver.
If you need more help you can ask. If you are success with flashing you can buy me a beer - PayPal - [email protected] :good:

LCD Version Checking?
Hi Dani,
Thanks for prompt response. It seems u r having Quad-Core phone (MTK6582), but mine is 6592 chipset, octacore one. Anyways, thanks a lot for sharing. I got the links for 6592 from needrom; BUT having the doubt about LCD version...how to check the LCD version before flashing any ROM?
If you can clarify, it will be gr8.
Thanks,
Joe
reshi5531 said:
Hello spljoe,
I will write you how to install ROM to your phone. First download links to ROMs:
1. Stock pre-rooted ROM Android 4.3.0 - needrom.com/download/official-factory-rooted-rom-android-4-3-0-mtk6582-for-mpai-809t/
2. Stock non rooted ROM Android 4.4.2 - needrom.com/download/official-factory-rom-android-4-4-2-kitkat-mtk6582-for-mpai-809t/
I prefer personally 4.3.0 because is pre-rooted and rooted apps works perfectly!
Now you need to download this files: mediafire.com/folder/w0dh4b4h854mqq6,e22d2b5foep12ty,em36kke7pwkwphf/shared
1. Install PDA drivers from file;
2. Now open MP809T mobile phone flash steps Android 4.4.2.doc and follow instructions;
First you have to know that there is 2 different LCD screens for MPai 809T. You have to choose witch driver to install for your LCD. For 4.3.0 ROM you have only 1 option for LCD! If after flashing you start the phone, but can not see the logo, that's means wrong LCD driver.
If you need more help you can ask. If you are success with flashing you can buy me a beer - PayPal - [email protected] :good:
Click to expand...
Click to collapse

For Mtk 6592 - OctaCore
Dear Dani,
Thanks for uploading all these files. It looks like u r using Quad Core 6582 chipset phone 809T. But I am having MTK6592 Octa-Core Phone. If you can, please assist me installing this 4.4.2 firmware. My phone is not detecting India network providers. I set the phone region to UAE and it was working when I was in Abu Dhabi, UAE. But now I am in India and I want to reinstall the ROM and check. My phone is just a electronic gadget now, without phone funtionality. Please help.
I am following this link below and I am getting an error message unable to continue with flashing. Anybody please help.
View attachment 2958354
View attachment 2958355
http://www.needrom.com/download/official-mpai-809t-mtk6592/
Thanks,
Joe
reshi5531 said:
Hello spljoe,
I will write you how to install ROM to your phone. First download links to ROMs:
1. Stock pre-rooted ROM Android 4.3.0 - needrom.com/download/official-factory-rooted-rom-android-4-3-0-mtk6582-for-mpai-809t/
2. Stock non rooted ROM Android 4.4.2 - needrom.com/download/official-factory-rom-android-4-4-2-kitkat-mtk6582-for-mpai-809t/
I prefer personally 4.3.0 because is pre-rooted and rooted apps works perfectly!
Now you need to download this files: mediafire.com/folder/w0dh4b4h854mqq6,e22d2b5foep12ty,em36kke7pwkwphf/shared
1. Install PDA drivers from file;
2. Now open MP809T mobile phone flash steps Android 4.4.2.doc and follow instructions;
First you have to know that there is 2 different LCD screens for MPai 809T. You have to choose witch driver to install for your LCD. For 4.3.0 ROM you have only 1 option for LCD! If after flashing you start the phone, but can not see the logo, that's means wrong LCD driver.
If you need more help you can ask. If you are success with flashing you can buy me a beer - PayPal - [email protected] :good:
Click to expand...
Click to collapse

Solution
Just download software from link that I give you from mediafire.com. There is a different flash software that can choose lcd version I can flash. Guide is also included.

MTK6592 Chipset, Oct-core 809T
reshi5531 said:
Just download software from link that I give you from mediafire.com. There is a different flash software that can choose lcd version I can flash. Guide is also included.
Click to expand...
Click to collapse
But my chipset is MTK6592 not what is mentioned in the document. I doubt it will work for me. I am confused and don't know how to proceed.
Please confirm this will work for MTK6592 chipset as well. Because mine is Octa-core phone.
I am just looking for step-by-step procedure to follow.
Thanks,
Joe

Answer
You can download ROM for MTK 6592 octacore where you find from needrom. After that you can follow the steps in my Guide from mediafire. Just use other ROM for MTK 6592 octacore.

reshi5531 said:
You can download ROM for MTK 6592 octacore where you find from needrom. After that you can follow the steps in my Guide from mediafire. Just use other ROM for MTK 6592 octacore.
Click to expand...
Click to collapse
Dear Dani,
I was able to upgrade the firmware from 4.3 to 4.4.2 by following your instructions. I installed from needrom download. But It's not complete format and reinstall. Upgrade didn't give me option to select/re-select the region to India. My India SIM cards are still not working. Can you please help me to format the phone completely and reinstall the 4.4.2 ROM ??? I have taken NVRAM backup using custom recovery.
If you can provide step-by-step procedure for that, it will be of gr8 help to me.
Thanks for the guide you have provided.
Thanks,
Joe

Answer
Hello,
I am sorry, but I have no idea what can you do more. You can ask someone else for help.

IMEI Issue
Incorrect IMEI # was causing the issue. After writing new IMEI # using Droid tool resolved my issue. Thanks for all your guidance. With your help I could upgrade my phone to 4.4.2. Thanks Dani, though no beer!
---------- Post added at 04:27 PM ---------- Previous post was at 04:24 PM ----------
reshi5531 said:
Hello spljoe,
I will write you how to install ROM to your phone. First download links to ROMs:
1. Stock pre-rooted ROM Android 4.3.0 - needrom.com/download/official-factory-rooted-rom-android-4-3-0-mtk6582-for-mpai-809t/
2. Stock non rooted ROM Android 4.4.2 - needrom.com/download/official-factory-rom-android-4-4-2-kitkat-mtk6582-for-mpai-809t/
I prefer personally 4.3.0 because is pre-rooted and rooted apps works perfectly!
Now you need to download this files: mediafire.com/folder/w0dh4b4h854mqq6,e22d2b5foep12ty,em36kke7pwkwphf/shared
1. Install PDA drivers from file;
2. Now open MP809T mobile phone flash steps Android 4.4.2.doc and follow instructions;
First you have to know that there is 2 different LCD screens for MPai 809T. You have to choose witch driver to install for your LCD. For 4.3.0 ROM you have only 1 option for LCD! If after flashing you start the phone, but can not see the logo, that's means wrong LCD driver.
If you need more help you can ask. If you are success with flashing you can buy me a beer - PayPal - [email protected] :good:
Click to expand...
Click to collapse
These drivers helped me to connect to PC successfully for data transfer through USB.
Thanks,
Joe
---------- Post added at 04:29 PM ---------- Previous post was at 04:27 PM ----------
reshi5531 said:
Hello spljoe,
I will write you how to install ROM to your phone. First download links to ROMs:
1. Stock pre-rooted ROM Android 4.3.0 - needrom.com/download/official-factory-rooted-rom-android-4-3-0-mtk6582-for-mpai-809t/
2. Stock non rooted ROM Android 4.4.2 - needrom.com/download/official-factory-rom-android-4-4-2-kitkat-mtk6582-for-mpai-809t/
I prefer personally 4.3.0 because is pre-rooted and rooted apps works perfectly!
Now you need to download this files: mediafire.com/folder/w0dh4b4h854mqq6,e22d2b5foep12ty,em36kke7pwkwphf/shared
1. Install PDA drivers from file;
2. Now open MP809T mobile phone flash steps Android 4.4.2.doc and follow instructions;
First you have to know that there is 2 different LCD screens for MPai 809T. You have to choose witch driver to install for your LCD. For 4.3.0 ROM you have only 1 option for LCD! If after flashing you start the phone, but can not see the logo, that's means wrong LCD driver.
If you need more help you can ask. If you are success with flashing you can buy me a beer - PayPal - [email protected] :good:
Click to expand...
Click to collapse
4.4.2 also can be rooted easily after flashing using it vroot method. It's worth I guess. People always prefer latest version

problem with speaker
hi guys i need ur help...i have chinese phone mp 809t octacore...is perfect !!!and i like so so much but now i have problem with the speaker(music ringtones etc)where can i find for this mobile replacement parts??thnx a lot for ur help

tosiro said:
hi guys i need ur help...i have chinese phone mp 809t octacore...is perfect !!!and i like so so much but now i have problem with the speaker(music ringtones etc)where can i find for this mobile replacement parts??thnx a lot for ur help
Click to expand...
Click to collapse
Even I have problem when I put my phone in loudspeaker mode while using Skype, so much noisy it is, almost not audible at all. Is there no voice reduction managed in this phone?
Is there anyway we can correct this?
Thanks,
Joe
---------- Post added at 12:28 PM ---------- Previous post was at 12:26 PM ----------
tosiro said:
hi guys i need ur help...i have chinese phone mp 809t octacore...is perfect !!!and i like so so much but now i have problem with the speaker(music ringtones etc)where can i find for this mobile replacement parts??thnx a lot for ur help
Click to expand...
Click to collapse
What part are you trying to replace? Are you sure this is the hardware problem? What exact issue are you facing? And when?

spljoe said:
Even I have problem when I put my phone in loudspeaker mode while using Skype, so much noisy it is, almost not audible at all. Is there no voice reduction managed in this phone?
Is there anyway we can correct this?
Thanks,
Joe
---------- Post added at 12:28 PM ---------- Previous post was at 12:26 PM ----------
What part are you trying to replace? Are you sure this is the hardware problem? What exact issue are you facing? And when?
Click to expand...
Click to collapse
thnx a lot for ur help and for ur time !!!yeah im sure is not hardware problem the phone speaker is broken...(i dont know if are the exactly words <<burned speaker>>

reshi5531 said:
Hello spljoe,
I will write you how to install ROM to your phone. First download links to ROMs:
1. Stock pre-rooted ROM Android 4.3.0 - needrom.com/download/official-factory-rooted-rom-android-4-3-0-mtk6582-for-mpai-809t/
2. Stock non rooted ROM Android 4.4.2 - needrom.com/download/official-factory-rom-android-4-4-2-kitkat-mtk6582-for-mpai-809t/
I prefer personally 4.3.0 because is pre-rooted and rooted apps works perfectly!
Now you need to download this files: mediafire.com/folder/w0dh4b4h854mqq6,e22d2b5foep12ty,em36kke7pwkwphf/shared
1. Install PDA drivers from file;
2. Now open MP809T mobile phone flash steps Android 4.4.2.doc and follow instructions;
First you have to know that there is 2 different LCD screens for MPai 809T. You have to choose witch driver to install for your LCD. For 4.3.0 ROM you have only 1 option for LCD! If after flashing you start the phone, but can not see the logo, that's means wrong LCD driver.
If you need more help you can ask. If you are success with flashing you can buy me a beer - PayPal - [email protected] :good:
Click to expand...
Click to collapse
Friend, I need your help. My 809T, with MTK6592, broke the screen. But I found one screen to buy, and I did this purchase, I already have the new screen. But when I plug the flat cable of the new screen in cell phone, the screen light up, but no image was shown. After that, I knew that 809T have two screen versions, and probally the screen that I bought have a different version that screen that came with cell phone.
I downloaded the ROM, but I need a help with intructions to install the ROM with driver for my new screen, because till now I couldn't install the screen with any program. I have the "SPMultiPortFlashDownloadProject", and "SP flash tool", but a several errors appear with these programs. Could you give the steps to configure these programs? My new screen is TD0-HD0499K70425.
I really need this cell phone, and think that I could lost it because I can't install the screen drives me crazy, because the cell phone is too good!

I have octa core model, with 4.4.2. i cant root it at all, any ideas?

Today I uploaded my modified KitKat ROM to needrom.com: Click.
Modifications:
- root access
- TWRP 2.7.1.0 included
- fixed external SD card limitations
- data partition resized to 2.0GB
- fake hardware specs and chinese crap removed
Please rate this ROM at needrom.com if you like it.

MKKLR21 said:
Today I uploaded my modified KitKat ROM to needrom.com: Click.
Modifications:
- root access
- TWRP 2.7.1.0 included
- fixed external SD card limitations
- data partition resized to 2.0GB
- fake hardware specs and chinese crap removed
Please rate this ROM at needrom.com if you like it.
Click to expand...
Click to collapse
How you resized the data partition? I have done it, and had problems, internal storage file system was damaged after reboots and at random times, and suddenly /data was wiped for no reason. I restored stock ebr1 and ebr2. This problem was happening only when i had many apps (when /data had more than 1GB data). Have you checked this?

Hi gerstavros, I manually edited EBR1 and EBR2.
I tried it out before with 2.5GB data partition and I had the same problem: damaged storage, phone doesn't boot, data gone...
I changed data partition size to 2.0GB and it works fine until now. Free space is about 650MB. Remaining internal storage is 444MB (I think this is sufficient for system apps that don't use external SD).

[KERNEL SOURCE] MT6592 (MTK6592) Kernel - Kernel, rom for DG550

Hi,
I was looking for developer who can make kernel (would be awesome also a rom) for MTK6592 especially for Doogee DG550. If you don't have DG550 never mind. Owners can buy you one. We will be so grateful.
Here is kernel source:
https://github.com/tpruvot/MT6592-KK-KERNEL
Thank you very much.

Mattthev said:
Hi,
I was looking for developer who can make kernel (would be awesome also a rom) for MTK6592 especially for Doogee DG550. If you don't have DG550 never mind. Owners can buy you one. We will be so grateful.
Here is kernel source:
https://github.com/tpruvot/MT6592-KK-KERNEL
Thank you very much.
Click to expand...
Click to collapse
i can build bt is abv kernel source nd drivers for dg550 ??

[email protected] said:
i can build bt is abv kernel source nd drivers for dg550 ??
Click to expand...
Click to collapse
Hi man, would be awesome. Are system img and boot img enough for you?
I posted it here:
http://www.needrom.com/download/dg550-kitkat-02112015-blackview-dm550/
It's just rebranded DG550 and it's better than original rom by Doogee (causes battery draining) and they also fix time from internet and other stuff...

Well, all MT6592 are "ALPS". AFAIK
Please provide proper LCM Driver, etc.
As i have the same device i'm very interested.
Files u provided are way not enough for a "simple" build
Currently i'm running this Phone at stock kernel with DarkL privat port. It gives me up to 5days battery on moderated use. So the stock dg550 Kernel is fine already, at least on the battery side ofc
However in my opinion there is no reason why somebody would donate a developer this phone. It cost around 135€. People would have more benefits if they just buy a new, cheaper and more powerful phone while dumping this one.
If u like a good Rom, u can still try port cm12.1 from mt6592 plattform. We might just miss steps in ramdisk

Traace said:
Well, all MT6592 are "ALPS". AFAIK
Please provide proper LCM Driver, etc.
As i have the same device i'm very interested.
Files u provided are way not enough for a "simple" build
Currently i'm running this Phone at stock kernel with DarkL privat port. It gives me up to 5days battery on moderated use. So the stock dg550 Kernel is fine already, at least on the battery side ofc
However in my opinion there is no reason why somebody would donate a developer this phone. It cost around 135€. People would have more benefits if they just buy a new, cheaper and more powerful phone while dumping this one.
If u like a good Rom, u can still try port cm12.1 from mt6592 plattform. We might just miss steps in ramdisk
Click to expand...
Click to collapse
I've contacted Doogee on some e-mails so be in touch. They post on FB post about developing roms for their phones. Does anybody know if they truly pick someone from XDA or 4pda?
Could some one please compile TWRP 2.8.7 or 2.8.6 for DG550? I tried but no success only boot loop

They dont share source. U can use stock Kernel and build cm around. Like few guys here.
Please just read the forum

don't worry dude....backup rom via mtk droid tool
den use my guide for port...nd for recovery check last post of @Traace
http://forum.xda-developers.com/android/development/guideport-cm-12-1-mtk6592-cm-12-1-t3142499

[email protected] said:
don't worry dude....backup rom via mtk droid tool
den use my guide for port...nd for recovery check last post of @Traace
http://forum.xda-developers.com/android/development/guideport-cm-12-1-mtk6592-cm-12-1-t3142499
Click to expand...
Click to collapse
When u plan to renew the tutorial? as it's still broken for us dg550 users
Current tutorial state is useless for us.

Traace said:
When u plan to renew the tutorial? as it's still broken for us dg550 users
Current tutorial state is useless for us.
Click to expand...
Click to collapse
can u share me info..what r u facing ??....though it's working grt for other devices....i'll share another guide

[email protected] said:
can u share me info..what r u facing ??....though it's working grt for other devices....i'll share another guide
Click to expand...
Click to collapse
Wonderful, thx.
Well it ain't boot(didnt pass vendor bootloader logo) on our Devices Doogee DG550. More than me already tried
Port from mt6582 to mt6592 works fine on first run

Yeah, it doesn't work at all. It was working on previous updates. They changed /data to 3GB that could be the problem, isn't it? I was working on flashable rom but it didn't boot. Even I use files from backup in TWRP, it must be problem with META-INF files.
Yeah other recoveries may work, but TWRP is best now like CWM few years ago. I can't even port 2.8.1 with that MTK tool on the newest rom from Blackview.
Also do you know about more complex tool for root checker? I have still problem I was using Super Su 2.46 but can't install busybox, so I used KingoUser and it was working but sometimes it stop working and I have to update Su binaries manually. BTW I don't like KingoUser, the Super Su is much better but doesn't work as it should on this rom. On my P4 5.1.1 working just fine.

my data is 8gb// ebr1 ebr2 .
what u mean, that previous version of cm12 kingzone worked on dg550?
The update script itself works fine with philz
For busybox i used "smartinstall" on Dark L Rom with dg550"

Traace said:
Wonderful, thx.
Well it ain't boot(didnt pass vendor bootloader logo) on our Devices Doogee DG550. More than me already tried
Port from mt6582 to mt6592 works fine on first run
Click to expand...
Click to collapse
ahh......seems like storage ,surfaceflinger issue .................may be extras too.........if u able to take logcat.....it help me lot to tell u exactly what's happening

[email protected] said:
ahh......seems like storage ,surfaceflinger issue .................may be extras too.........if u able to take logcat.....it help me lot to tell u exactly what's happening
Click to expand...
Click to collapse
Sorry adb doesn't work, hang on vendor.
- waiting for device..
Could u do me a favor and check if my ramdisk is different from other mtk's?
Here is a link from both ramdisks only: http://d-h.st/1VOT
Proper drivers are in place
untouched ramdisk hang on vendor logo nothing happens, if i edit mail node in ueventd.rc(Line 152, thx to @chanaka89 ) the device reboots after a while. Never pass logo
thx for ur help