Hi,
I was looking for developer who can make kernel (would be awesome also a rom) for MTK6592 especially for Doogee DG550. If you don't have DG550 never mind. Owners can buy you one. We will be so grateful.
Here is kernel source:
https://github.com/tpruvot/MT6592-KK-KERNEL
Thank you very much.
Mattthev said:
Hi,
I was looking for developer who can make kernel (would be awesome also a rom) for MTK6592 especially for Doogee DG550. If you don't have DG550 never mind. Owners can buy you one. We will be so grateful.
Here is kernel source:
https://github.com/tpruvot/MT6592-KK-KERNEL
Thank you very much.
Click to expand...
Click to collapse
i can build bt is abv kernel source nd drivers for dg550 ??
[email protected] said:
i can build bt is abv kernel source nd drivers for dg550 ??
Click to expand...
Click to collapse
Hi man, would be awesome. Are system img and boot img enough for you?
I posted it here:
http://www.needrom.com/download/dg550-kitkat-02112015-blackview-dm550/
It's just rebranded DG550 and it's better than original rom by Doogee (causes battery draining) and they also fix time from internet and other stuff...
Well, all MT6592 are "ALPS". AFAIK
Please provide proper LCM Driver, etc.
As i have the same device i'm very interested.
Files u provided are way not enough for a "simple" build
Currently i'm running this Phone at stock kernel with DarkL privat port. It gives me up to 5days battery on moderated use. So the stock dg550 Kernel is fine already, at least on the battery side ofc
However in my opinion there is no reason why somebody would donate a developer this phone. It cost around 135€. People would have more benefits if they just buy a new, cheaper and more powerful phone while dumping this one.
If u like a good Rom, u can still try port cm12.1 from mt6592 plattform. We might just miss steps in ramdisk
Traace said:
Well, all MT6592 are "ALPS". AFAIK
Please provide proper LCM Driver, etc.
As i have the same device i'm very interested.
Files u provided are way not enough for a "simple" build
Currently i'm running this Phone at stock kernel with DarkL privat port. It gives me up to 5days battery on moderated use. So the stock dg550 Kernel is fine already, at least on the battery side ofc
However in my opinion there is no reason why somebody would donate a developer this phone. It cost around 135€. People would have more benefits if they just buy a new, cheaper and more powerful phone while dumping this one.
If u like a good Rom, u can still try port cm12.1 from mt6592 plattform. We might just miss steps in ramdisk
Click to expand...
Click to collapse
I've contacted Doogee on some e-mails so be in touch. They post on FB post about developing roms for their phones. Does anybody know if they truly pick someone from XDA or 4pda?
Could some one please compile TWRP 2.8.7 or 2.8.6 for DG550? I tried but no success only boot loop
They dont share source. U can use stock Kernel and build cm around. Like few guys here.
Please just read the forum
don't worry dude....backup rom via mtk droid tool
den use my guide for port...nd for recovery check last post of @Traace
http://forum.xda-developers.com/android/development/guideport-cm-12-1-mtk6592-cm-12-1-t3142499
[email protected] said:
don't worry dude....backup rom via mtk droid tool
den use my guide for port...nd for recovery check last post of @Traace
http://forum.xda-developers.com/android/development/guideport-cm-12-1-mtk6592-cm-12-1-t3142499
Click to expand...
Click to collapse
When u plan to renew the tutorial? as it's still broken for us dg550 users
Current tutorial state is useless for us.
Traace said:
When u plan to renew the tutorial? as it's still broken for us dg550 users
Current tutorial state is useless for us.
Click to expand...
Click to collapse
can u share me info..what r u facing ??....though it's working grt for other devices....i'll share another guide
[email protected] said:
can u share me info..what r u facing ??....though it's working grt for other devices....i'll share another guide
Click to expand...
Click to collapse
Wonderful, thx.
Well it ain't boot(didnt pass vendor bootloader logo) on our Devices Doogee DG550. More than me already tried
Port from mt6582 to mt6592 works fine on first run
Yeah, it doesn't work at all. It was working on previous updates. They changed /data to 3GB that could be the problem, isn't it? I was working on flashable rom but it didn't boot. Even I use files from backup in TWRP, it must be problem with META-INF files.
Yeah other recoveries may work, but TWRP is best now like CWM few years ago. I can't even port 2.8.1 with that MTK tool on the newest rom from Blackview.
Also do you know about more complex tool for root checker? I have still problem I was using Super Su 2.46 but can't install busybox, so I used KingoUser and it was working but sometimes it stop working and I have to update Su binaries manually. BTW I don't like KingoUser, the Super Su is much better but doesn't work as it should on this rom. On my P4 5.1.1 working just fine.
my data is 8gb// ebr1 ebr2 .
what u mean, that previous version of cm12 kingzone worked on dg550?
The update script itself works fine with philz
For busybox i used "smartinstall" on Dark L Rom with dg550"
Traace said:
Wonderful, thx.
Well it ain't boot(didnt pass vendor bootloader logo) on our Devices Doogee DG550. More than me already tried
Port from mt6582 to mt6592 works fine on first run
Click to expand...
Click to collapse
ahh......seems like storage ,surfaceflinger issue .................may be extras too.........if u able to take logcat.....it help me lot to tell u exactly what's happening
[email protected] said:
ahh......seems like storage ,surfaceflinger issue .................may be extras too.........if u able to take logcat.....it help me lot to tell u exactly what's happening
Click to expand...
Click to collapse
Sorry adb doesn't work, hang on vendor.
- waiting for device..
Could u do me a favor and check if my ramdisk is different from other mtk's?
Here is a link from both ramdisks only: http://d-h.st/1VOT
Proper drivers are in place
untouched ramdisk hang on vendor logo nothing happens, if i edit mail node in ueventd.rc(Line 152, thx to @chanaka89 ) the device reboots after a while. Never pass logo
thx for ur help
Related
Karbonn A11 Stock ROM is here
Now no worrying when your has stopped working and/or has any problem :crying: cause the stock rom is here. :victory:
No following the long procedure of flashing via Flash tool :victory:
Simple, Easy & Convineint.
EDIT:-
Modified A11 zip with working services [discontinued for another rom]
You can get it from HERE
This is the Stock Operating System (SOS):laugh:
*if you want blazing fast speed more than cyanogenmod in stock rom then format data, cache & system and then install
Uploaded Deodexed Operating System (DOS) now at HERE
*note that in this rom out takes aquite heck of a time to boot and is also laggy (as you should know that the odex file optimizes tyre ram usage)
If You also want to develop ROMs or use android kitchen then the template files are also here
Code:
[URL="http://www.mediafire.com/download/43677668vsox122/A11"]A11 Template[/URL]
this [URL="http://www.mediafire.com/download/sh1ae6zdhkuzi1u/_template"]_template file[/URL] if required
And Please thank if helped as thanks boosts my procedure speed:good:
show some mercy as I am just 16 and just passed 10th std.
it only takes a click on the thanks button to thank
Thank god koi toh aage aya development ke liye keep up da good work man koi help chahiye ho agar toh btana :silly:
vishal gi..have any custom rom for karbonn a11. actually i want cyanogen mod but couldn't find..so any custom rom if u know then tell me???
Sent from my A11 using xda app-developers app
first of all i want to mention there is no cyanogenmod for any mediatek device and Karbonn a11 is MT6575 or many call it as MTK6575 with a MT6620 communication chipset
other custom roms will be ported if someone tries or wants to
currently i am working on Lewa os and LG L5 L5 II's rom so have patience
Cyanogenmod for mediatek devices-http://forum.xda-developers.com/showthread.php?t=2274332
If helped then press thanks
pkdlca said:
vishal gi..have any custom rom for karbonn a11. actually i want cyanogen mod but couldn't find..so any custom rom if u know then tell me???
Sent from my A11 using xda app-developers app
Click to expand...
Click to collapse
hey brother i too m trying to port lewa os from some chinese phone.... i'll provide it asap..!!
bro..please suggest any custom rom...plz..
Sent from my A11 using xda app-developers app
None are currently available:banghead:
Porting ROM's for or device
If you want to see more development of MTK devices then subscribe to yueweng's MTK topics
And can anyone suggest how can I open/extract Lg's v30 .bin files
If helped then press thanks
arnabbiswasalsodeep said:
None are currently available:banghead:
Porting ROM's for or device
If you want to see more development of MTK devices then subscribe to yueweng's MTK topics
And can anyone suggest how can I open/extract Lg's v30 .bin files
If helped then press thanks
Click to expand...
Click to collapse
Have u tried HEX EDITOR??
But why hex?
If helped then press thanks
arnabbiswasalsodeep said:
But why hex?
If helped then press thanks
Click to expand...
Click to collapse
I used to edit .bin files using hex editor
I don't want to edit the bin file
I want to extract img files from it
Sorry as I am unresponsive these days cause I have exams
If helped then press thanks
arnabbiswasalsodeep said:
I don't want to edit the bin file
I want to extract img files from it
Sorry as I am unresponsive these days cause I have exams
If helped then press thanks
Click to expand...
Click to collapse
got working lewa os gonna post the link soon..
Hit thanks....:angel:
vishal2218 said:
got working lewa os gonna post the link soon..
Hit thanks....:angel:
Click to expand...
Click to collapse
I also have lewa but it's on my Ubuntu drive and also not tested and thanks but is everything working or there are some little bugs (i could help to debug)
I majorly wanted to do work on Lg rom then lewa but the misfortune is that my computer is working very slow (Pentium D 805, Gigabyte GA G41M-Combo, 250 watt generic power supply, etc.) as it is an obsolete computer and i am very bored to do work and want to upgrade to the upcoming AMD's Kaveri APU as i want to play games and do some work
Till then I am staying quiet silent and still
last but could give me all the info about what you used and what were the major issues
CRONOS has been stopped or postponed as i am now less interested.
arnabbiswasalsodeep said:
I also have lewa but it's on my Ubuntu drive and also not tested and thanks but is everything working or there are some little bugs (i could help to debug)
I majorly wanted to do work on Lg rom then lewa but the misfortune is that my computer is working very slow (Pentium D 805, Gigabyte GA G41M-Combo, 250 watt generic power supply, etc.) as it is an obsolete computer and i am very bored to do work and want to upgrade to the upcoming AMD's Kaveri APU as i want to play games and do some work
Till then I am staying quiet silent and still
last but could give me all the info about what you used and what were the major issues
CRONOS has been stopped or postponed as i am now less interested.
Click to expand...
Click to collapse
Well there is a bug in music player.. It fc's when we increase or decrease the volume. Actually i am quite busy these days.. Will provide you the link of it later..:silly:
https://disk.yandex.com/public/?hash=vpSdbjtf4z90xfkI3UMZLLzy9utl1vzUS/96p0HNoFA%3D&locale=ru
hERE'S the link bro...
Press thanks......:silly:
lol. found an amazing link, should worth a visit
http://pune.olx.in/karbonn-a11-with-custom-rom-rooted-iid-543590238
lets ask him how??
Hello.
I 'm trying to port MIUI V7 from XIAOMI MI4I to our Idol3 (6045Y).
I take miuiv7 from xiaomi, i take boot.img from stock 6045, i edit updater-script (remove flash modem and other things)
It boot, after a long time, touchscreen work.
I have to mix firmware (lib, hw and other)
I'm noob on this kind of work, but i think it could work
qlll, waiting to test it
2nd try: bootloop.
It's very hard, i don't know how to resolve.
There is no help on web to do that with lollipop x64 roms
I think that a dev can do this, Idol3 (6045) and MI4I are very close.
I believe on it
OMG I can't wait to test MIUI on the idol 3 *_*
Sorry, can't continue. It's my daily use phone.
I test new cook when it is possible ....
murigny64 said:
Sorry, can't continue. It's my daily use phone.
Click to expand...
Click to collapse
Wait,you are actually serious? xD
"Its my daily phone."
And our phones aren't? LOL
Sent from my 6045X using Tapatalk
So quick to get our hopes up, then just drop us like a hot potato. ?
Hello, it was just a try. Don't be angry.
I take miui from tcl mg3, xiaomi mi4i.: no success
Mix with stock rom and cm12.1.:no success
odexed, deodex: no success
Sorry, i try ....
I've bricked my last phone (moto g). And now, i very careful.
I use this guides :
http://www.osbusters.net/2015/11/how-to-port-miui-7-rom-to-qualcomm-smartphones.html
http://forum.xda-developers.com/android/software/guide-build-port-miui-rom-to-device-t3250984
And i send a PM to a man on Needrom who have made a port to TCL MG3 from MI4I MIUIV7.
Wait and see
murigny64 said:
Hello, it was just a try. Don't be angry.
I take miui from tcl mg3, xiaomi mi4i.: no success
Mix with stock rom and cm12.1.:no success
odexed, deodex: no success
Sorry, i try ....
I've bricked my last phone (moto g). And now, i very careful.
I use this guides :
http://www.osbusters.net/2015/11/how-to-port-miui-7-rom-to-qualcomm-smartphones.html
http://forum.xda-developers.com/android/software/guide-build-port-miui-rom-to-device-t3250984
And i send a PM to a man on Needrom who have made a port to TCL MG3 from MI4I MIUIV7.
Wait and see
Click to expand...
Click to collapse
Well,Yu Yureka is a much better choice to port MIUI from.
I did think about porting it myself,but I gave up as soon as I realised that the stock rom had to be adb-pulled,and that the PORT rom was in .img files(system.img,boot.img-and the guides were for normal roms,not ones in .img files)
Yukera MIUI is a port too.
Trying:
From Yukera: app,priv-app,framework,media, font
From Stock: all other folders
I use stock 10.07 boot.img with modified ramdisk (miui stuff)
It boot but stuck on bootanim, no adb so no logcat.
I was also wondering if we could get FlymeOS ported,but I do not know where to even begin.
There is a msm8916(snapdragon 615) variant of the Meizu M1 Note,and Flyme supossedly isnt as troublesome as MIUI.
New step :
Using Boot.img from CM12.1 and modify ramdisk according to MIUI
Flashing Yukera MIUIV7 with no mods and then flashing my modified boot.img
Very long boot (15mins) and i've the setting screen but it's soft reboot and go to next setting screen, and soft reboot, next screen, etc ... and hura ! the launcher with continuous fc.
No wifi, no sim
go to next step, change dpi to 480, add soft key.
murigny64 said:
New step :
Using Boot.img from CM12.1 and modify ramdisk according to MIUI
Flashing Yukera MIUIV7 with no mods and then flashing my modified boot.img
Very long boot (15mins) and i've the setting screen but it's soft reboot and go to next setting screen, and soft reboot, next screen, etc ... and hura ! the launcher with continuous fc.
No wifi, no sim
go to next step, change dpi to 480, add soft key.
Click to expand...
Click to collapse
You can insert a stock CM launcher,you know,it shouldnt FC
EDIT
Wait,you took the unedited zip of Yu Yureka and flashed it?
Put the libs of our device,cause Yu Yureka only has same CPU,not the speakers,"deeper" hardware/software links,etc.
Ok Marionnette, but witch libs ? from stock or CM ? because boot.img is CM 5.1.1
I PM a link to the current build
murigny64 said:
Ok Marionnette, but witch libs ? from stock or CM ? because boot.img is CM 5.1.1
I PM a link to the current build
Click to expand...
Click to collapse
https://www.androidfilehost.com/?fid=24269982087008743
ARDE kernel is good,but I sugges tthat you first try with a pure CM boot.img,not a modified one.
Well,if the CM based build is booting,then take the libs and other things from it(like the guide you mentioned says when porting from one device to to other).
I will try to mix something up fast,and after tomorrow last school day,I will have more than 2 weeks t have fun with this.
Hello
After lot of try, I have no good result.
Sorry, I stop testing.
Is there somebody who want to try?
Hello
I want to resume your work you could upload
For me avoid rebuild everything coordialement
Excuse me for m'y very bad english
Any solutions for port from TCL 3S M3G's rom ?
http://www.devicespecifications.com/fr/comparison/751d59366
http://www.needrom.com/category/tcl/m3g/
Hello,
M3G MIUI is still on 5.0.2, porting this rom is very hard without CM12 (5.0.2) base
Miui ports from m3g on russian 4pda.ru many ports
AOSP stands for “Android Open Source Project”. Basically, AOSP refers to Google’s Android operating system.
AOSP ROMs keep the “open source” concept whereas TouchWiz/Sense/MotoBlur ROMs are highly modified versions of AOSP by companies like Samsung, HTC, and Motorola.
What's Working
Almost everything
Audio
HOTSPOT
WIFI
CAMERA -8Mp & 5MP
Bluetooth
Multiwindow
GPS
VOLTE
BUGS:--
phonography app which is due to dolby atom you can download any music player to use
Source device : Coolpad note 3 lite (mt6735)
NOTE: DONT USE Xposed Its making System laggy.
Installation
BACKUP - SYSTEM , BOOT & DATA (NVDATA & NVRAM IF YOU WANT)
WIPE - System , Data , Dalvik and Cache
INSTALL -- ROM.zip and Gapps
Reboot to System
I am not responsible for any brick of your device try at your own risk
Download Link :
Mega : https://mega.nz/#!7xomWIbC!crV-OmPJGXwnVA57p3YJbOnUr4kUIlEfaKiToFFvk4U
Google drive : https://drive.google.com/file/d/0ByQrpKnEgF8VMUYxWlRBSDctQVE/view?usp=drivesdk
Thank you very much and Happy diwali stay blessed
XDA:DevDB Information
AOSP VOLTE_P1m BY SANDEEP, ROM for all devices (see above for details)
Contributors
sandeep.k, CRT Team
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.x
ROM Firmware Required: mt6735m (64bit)
Based On: AOSP
Version Information
Status: Stable
Stable Release Date: 2017-10-19
Created 2017-10-19
Last Updated 2017-10-19
DONT FORGOT TO HIT THANKS BUTTON IF YOU LIKE MY WORK:silly:
Bro your rom is awesome, Thanks for porting rom
everything is working fine. Please help me choose which gapps should i install 'cause i tried stock 6.0 it is not working.?
Gapps for volte
sdhan9879 said:
Bro your rom is awesome, Thanks for porting rom
everything is working fine. Please help me choose which gapps should i install 'cause i tried stock 6.0 it is not working.
Click to expand...
Click to collapse
Use gapps arm64 6.0 pico
Bro, ROM is boot loop errer.how to solve Lenovo Vibe p1m
I had updated to but after restart touch is not working in my p1m. Let me know the fix. the screen shows dropdown for language and arrow below it.
good.. bro
Touch is not working
I flashed the rom with proper caution step by step. After successfully installed voLTE flag showed up in Jio Number. But the issue is touch is not working hence phone stucked at phone set up stage. I called that Jio Number from another phone it was ringing but I can’t accept the call due to non functioning touch. I send a text massage which was received and showed on screen too. I back to recovery touch is working again there so I reset the phone and reboot again to system. Touch was not working again. Then I go to recovery again wipe cache and dalvik and flash the rom again after rebooting touchscreen did not responding. Then I flash back to stock rom the touch issue was resolved. Again I rooted the phone, install twrp and wipe data and flash the Volte rom again. Again all is working except Touch.
Sandeep or any other experts, plz help me to fix the issue.
Waiting for your reply
about charging
I have been using u r ROM 10 day.my mobile is always in charging only till I did not get 100% charge. plz kelp me to get quick charge in u r ROM and the battery saver key lenovo vibe p1m is also not workin. So plzz help me bro and thank you for giving volte support in my phone. Thank you a lot
http://opengapps.org/ download from here arm64> 6.0> pico
sdhan9879 said:
Bro your rom is awesome, Thanks for porting rom
everything is working fine. Please help me choose which gapps should i install 'cause i tried stock 6.0 it is not working.
Click to expand...
Click to collapse
http://opengapps.org/ download from here arm64> 6.0> pico
M.karthick said:
Bro, ROM is boot loop errer.how to solve Lenovo Vibe p1m
Click to expand...
Click to collapse
Connect charger while booting rom
Dilkhush Divan said:
I had updated to but after restart touch is not working in my p1m. Let me know the fix. the screen shows dropdown for language and arrow below it.
Click to expand...
Click to collapse
its not problem with the rom problem with touch screen flash another rom and check
There are bugs like storage read write , charging issue, system launcher crash, Google service stopped working notification and over all VoLTE issue. By inserting/patching a VoLTE logo in the device doesn't make this or other VoLTE Logo ROM a VoLTE enabled device. The ROM should add all the volte features e.i call conference, video call etc.
Vibe P1M users are attracted to such ROM only to get volte so do not mislead your rom users with a false promise that "Everything works".
Fix all the above issues to make it a good and workable rom.
Its not any false promise and did you give me something for this i have done it on my own hardwork and there is bugs which i also knew later charging bug is due to kernel and try on your own risk ok if you dont like the rom just leave it and first learn to appericiate works of others then do anything your using a device with 1ghz specification and which doesnot support volte at all its stock not even cross lollipop but hardwork of developers take this to nougat and till volte so learn to be polite first i am not forcing anyone to use it as daily driver it is request from people that they want volte so volte is there you are assuming that you will get all feature of smartphone with higher range then go and buy new device and sorry for my language
sandeep.k said:
Its not any false promise and did you give me something for this
Click to expand...
Click to collapse
Have you asked for it?
i have done it on my own hardwork and there is bugs which i also knew later
Click to expand...
Click to collapse
A good developer/programmer tests his/her works thoroughly before making it available for public use.
charging bug is due to kernel and try on your own risk
Click to expand...
Click to collapse
In youtube video you didn't mention about it, did you? when people started complaining about it then you realise it
ok if you dont like the rom just leave it and first learn to appericiate works of others
Click to expand...
Click to collapse
As stated in your youtube channel I appreciate your work and encourage you to improve it. Moreover I've linked you the screenshot of different device that lenvo made after vibe p1m that is running on same hardware structure that vibe p1m was made but you deliberately ignored my comment.
then do anything your using a device with 1ghz specification and which doesnot support volte at all its stock not even cross lollipop but hardwork of developers take this to nougat and till volte so learn to be polite first
Click to expand...
Click to collapse
Refer to my above post. link to the screenshot for the same processor that is running VoLTE- https://imgur.com/3ooVLyJ
I've never shown my impoliteness to you or anybody.
i am not forcing anyone to use it as daily driver it is request from people that they want volte so volte is there you are assuming that you will get all feature of smartphone with higher range then go and buy new device and sorry for my language
Click to expand...
Click to collapse
DO you think you deserve a polite word? Do you think I only own vibe p1m not other device that run VoLTE?
anyway to stop mdlogger and Also to make rom smooth, it lags a lot
sandeep.k said:
Connect charger while booting rom
Click to expand...
Click to collapse
This solution saved me ! But can you explain to us, why we have always to plug the charger at rebooting ?
Me.azerty said:
This solution saved me ! But can you explain to us, why we have always to plug the charger at rebooting ?
Click to expand...
Click to collapse
yes because you got newer model of p1m that have different driver with old one and it caan be bypass by connecting charger
sandeep.k said:
yes because you got newer model of p1m that have different driver with old one and it caan be bypass by connecting charger
Click to expand...
Click to collapse
I think that it is related to my kernel version which is 3.10.* vs 3.18.* on the new models. Can I upgrade my kernel ?
can i flash this rom in s040 build version??
sandeep.k said:
its not problem with the rom problem with touch screen flash another rom and check
Click to expand...
Click to collapse
Hi, Dilkhush Divan.
I am having exactly same problem like you. I hv tried other rom but in all same touch issue. Did you found any solution for this.
Following the news of the Android Go release, I wondered if it would be possible for someone to port it to this old device:
https://www.xda-developers.com/android-go-news/
I think it would be awesome. Would it be possible or are we still missing something important?
The s2 plus community has died. I can do a port when it comes around, but without support i can't do anything.
A Bad Guy said:
This device has lack of support
See s dous 2 forum , the same chip device with this phone
8.0 : Yes
Miui 8 : Yes
This device is quite good , but real fact there is less real dev for this phone since ghsr
Click to expand...
Click to collapse
OT:
In that case, will porting a s duos 2 rom for s2+ work?
A Bad Guy said:
Maybe . My friend have tried to port s2 plus to s dous 2 and it works so i thought you can try
About 8.0 , I'm not sure . This dev didnt have an available oreo kernel that can booted oreo rom ( I saw @matteo0026 just managed to made it bootloop )
Click to expand...
Click to collapse
What about miui8? Will it worth a try?
Android oreo (8.0) of s dous 2 is highly unstable (just booted that's all) . Any way, it will be good, if someone could upstream kernel of s2+ (unfortunately no active expert developers fr s2+ , who could easily fix the rejects during upstreaming (or upgradeing))
A Bad Guy said:
This device has lack of support
See s dous 2 forum , the same chip device with this phone
8.0 : Yes
Miui 8 : Yes
This device is quite good , but real fact there is less real dev for this phone since ghsr
Click to expand...
Click to collapse
Just checked s dous 2 forum & I can say that u r 100% correct. They got really good developers & good support
They even fixed screenshot & recent thumbnail issues of nougat rom (which is also a common bug for s2+)
Hats off
Johnny TDN said:
The s2 plus community has died. I can do a port when it comes around, but without support i can't do anything.
Click to expand...
Click to collapse
I think andoid go sources are out
https://forum.xda-developers.com/2015-moto-g/development/rom-pixel-experience-edition-t3717869
Moto G has AOSP based android go (8.1) nw.
But we lack dev's & support. So andoid go may end up in our dreams
A Bad Guy said:
There is one dev still working , i think so
Click to expand...
Click to collapse
Yes true.
We can't force anyone to work on a rom. Its all up to them.
So lets hope for better
Also Upgradeing kernal to 3.4.xx or 3.10.xx from 3.0.101 is necessary for android go or miui 8.
If anyone of u guys have a knowledge or experinece about kernal porting (or kernal upgrade) , pls try to port a kernal (can take committs from s duos 2) to our device
A Bad Guy said:
No no no
I think you are wrong
3.0.101 is enough for both , but it will takes a lot of cherry pick commit to boot up oreo or go ( more than 100 commits i thought ) . 3.4 and 3.10 just make the way to oreo and go easier ( maybe less than 50 commits )
3.0.101 is also enough for miui 8 , but i think the way this phone dev's port it is completely WRONG , that's why it cant able to booted up
Click to expand...
Click to collapse
If u have enough knowledge about these stuff's (port &upgrade),why don't you try upgradeing or port
A Bad Guy said:
Be smart , I not good at cherry pick
About miui , i not sure it will have bugs fixed . Problem not caused by kernel , it is caused by libs
But if you wanna try , i give you suggest : unpack boot of both rom ( cm13 s2 plus , miui 8 trend plus ) replace zimage of cm 13 ( s2 plus ) with miui 8 ( trend plus ) , repack boot ( miui 8 ) , flash and let c if it will it boot .
Click to expand...
Click to collapse
I already tried miui8 porting. But end up in bootloop.
When I took logcat, I saw a error of something like "bradcom tv error" .
A Bad Guy said:
Replace lib android runtime.so , android server.so , media_jni.so
Works ?
Click to expand...
Click to collapse
I already tried that. Not working.
I think a expert porter / developer is required
I quit working on it due to so many rejects
A Bad Guy said:
Try to port from s3
Just edit boot
Let c will it booted
Click to expand...
Click to collapse
In-case of s3, many changes are needed (I am not a good developer ).
Since community is dead, there is no use in porting any rom to these device. Even if I try that, I will not get any support from s2+ community to fix the bugs. (I know that ever since I tried to fix screenshot bug of nougat rom. Only I got support from ghsr & satcom886)
Ribin Manuel said:
What about miui8? Will it worth a try?
Android oreo (8.0) of s dous 2 is highly unstable (just booted that's all) . Any way, it will be good, if someone could upstream kernel of s2+ (unfortunately no active expert developers fr s2+ , who could easily fix the rejects during upstreaming (or upgradeing))
Click to expand...
Click to collapse
i really liked the MIUI 7 but it's a old android version.
MIUI 8 is a great alternative
Hope
Ribin Manuel said:
In-case of s3, many changes are needed (I am not a good developer ).
Since community is dead, there is no use in porting any rom to these device. Even if I try that, I will not get any support from s2+ community to fix the bugs. (I know that ever since I tried to fix screenshot bug of nougat rom. Only I got support from ghsr & satcom886)
Click to expand...
Click to collapse
I hope the s2 community does't die completely, do you know where i can download the 3.4.xx kernel for the S2?
Moderator note:
This is a test build. Flash at your own risk! Many things may not be working and you may encounter bootloop. Please do not flash if you don't know whast you're doing!
This is my first porting of a rom...be understanding
Requirements
- Bootloader Unlocked
- Recovery TWRP
Do a full wipe (data, system, dalvik and cache), flash MIUI 9 (Global Rom porting from Note 4 MTK) and enjoy it!
LINK
Anyone tried this ROM. Any bugs. Screenshots please.
I can t try because dont have this phone
fosseperme said:
This is my first porting of a rom...be understanding
Requirements
- Bootloader Unlocked
- Recovery TWRP
Do a full wipe (data, system, dalvik and cache), flash MIUI 9 (Global Rom porting from Note 4 MTK) and enjoy it!
LINK
Click to expand...
Click to collapse
Keep up tge good work. Im surprised this even happened.
fosseperme said:
This is my first porting of a rom...be understanding
Requirements
- Bootloader Unlocked
- Recovery TWRP
Do a full wipe (data, system, dalvik and cache), flash MIUI 9 (Global Rom porting from Note 4 MTK) and enjoy it!
LINK
Click to expand...
Click to collapse
Nice, i will try it
SkaboXD said:
Nice, i will try it
Click to expand...
Click to collapse
Have you tried it how's it?
Wilson Shrestha said:
Have you tried it how's it?
Click to expand...
Click to collapse
i Just downloaded it in night, didn't tried it yet
IT'S FAKE, GUYS!! He tried some random guide on the internet! He doesn't know what he's doing. He posted the same exact ROM for the Mi A1 and he bricked other people's devices. Please don't try this!
SkaboXD said:
i Just downloaded it in night, didn't tried it yet
Click to expand...
Click to collapse
I thought so since Nokia hasn't released its source codes yet.
I'm looking at the specs of the note4 mtk, and I see that the chipset is Mediatek MT6797 Helio X20.
I'm not sure that would work with the nokia 3
nicolasmart said:
IT'S FAKE, GUYS!! He tried some random guide on the internet! He doesn't know what he's doing. He posted the same exact ROM for the Mi A1 and he bricked other people's devices. Please don't try this!
Click to expand...
Click to collapse
Mi A1 has different partition scheme. The rom should work for Nokia and Mediatek.
Well, we will know is it real rom if someone flash it
SkaboXD said:
Well, we will know is it real rom if someone flash it
Click to expand...
Click to collapse
Someone crazy enough to flash this I'm not. And who cares about MIUI 9 when sweet Oreo is on the way.
fosseperme said:
Mi A1 has different partition scheme. The rom should work for Nokia and Mediatek.
Click to expand...
Click to collapse
Which method you used for porting this ROM?
SkaboXD said:
Which method you used for porting this ROM?
Click to expand...
Click to collapse
https://forum.xda-developers.com/android/development/guide-android-6-0-x-marshmallow-rom-t3373520
fosseperme said:
https://forum.xda-developers.com/android/development/guide-android-6-0-x-marshmallow-rom-t3373520
Click to expand...
Click to collapse
This is for 6.0, Nokia 3 have Android 7.0 and Androis 7.1.1. I think that it won't work. And also it is for MT65xx chipsets
fosseperme said:
https://forum.xda-developers.com/android/development/guide-android-6-0-x-marshmallow-rom-t3373520
Click to expand...
Click to collapse
Guys, I just got my hands on NK3(Nokia 3) today, hoping I will be able to do something for it soon.
AND regrading the quoted reply to link(guide) , I wrote that simple guide and it's not and never meant for porting Miui Roms.
FOR now, I have not tested the acclaimed Miui for NK3 , and as some says it's fake it might be true but to clear all doubts, someone should take the risk and try.
If I get free time too, I will try it personally to see.
iykeDROID™ said:
Guys, I just got my hands on NK3(Nokia 3) today, hoping I will be able to do something for it soon.
AND regrading the quoted reply to link(guide) , I wrote that simple guide and it's not and never meant for porting Miui Roms.
FOR now, I have not tested the acclaimed Miui for NK3 , and as some says it's fake it might be true but to clear all doubts, someone should take the risk and try.
If I get free time too, I will try it personally to see.
Click to expand...
Click to collapse
first of all thanks for the guide. I want to clarify that I drew inspiration not only from yours, but also from this http://www.osbusters.net/2015/11/how-to-port-miui-7-rom-to-qualcomm-smartphones.html, which is designed for processors qualcomm but that is fine in general and is based on a comparison of fstab files of the boot.img through the meld software.
fosseperme said:
first of all thanks for the guide. I want to clarify that I drew inspiration not only from yours, but also from this http://www.osbusters.net/2015/11/how-to-port-miui-7-rom-to-qualcomm-smartphones.html, which is designed for processors qualcomm but that is fine in general and is based on a comparison of fstab files of the boot.img through the meld software.
Click to expand...
Click to collapse
Please no matter what you do or can do, its not recommended to do use a number of peoples' device to test a project it your ain't certain.
in the previous replies, someone mentioned that you did same to Mi A1 which you got those devices bricked, please and please , its better you get a tester to test your stuffs for you than to push to publicc for all dudes to bricked thier device.
Remember, they used money to purchase the NK3.
Thanks.
Yeah completely hard bricked my phone I think, have to wait until I can be back with it to see if it is possible to unbrick it.
Seems like when I tried it earlier, it didn't even boot into the preloader....
Can anyone here see if https://forum.hovatek.com/thread-11836.html is possible?