Database Info

[GUIDE] Huawei IDEOS X3 (U8510) | Root | CWM | CyanogenMod 7.2

This thread is about the Huawei IDEOS X3 (U8510) mobile phone.
Some apparent facts:
We need a dedicated X3 forum or at least a generic Huawei forum where all the numerous Huawei owners can get together.
Huawei U8650 ROM's are compatible with the X3's with some minor configuration differences. The U8650 port of CM7 is claimed to work well with the X3 and is faster than the stock ROM.
Much of X3 development activity have been on German and Spanish forums. Maybe because the English-speaking world got their X3's much later than continental Europe?
XDA sources:
Long X3 Q&A thread
External sources:
Android Hilfe X3 Forum (German)
Modaco Wiki X3 ROM's (though seems outdated)
HTC Mania U8650 Forum (Spanish)
Rooting Instructions
This was taken from lowskill's Automatic Root Enabler thread in Android Hilfe forums. Many thanks to him for this.
The Automatic Root Enabler for the X3 v1.0 should install:
ClockworkMod Recovery v4.0.1.5
Superuser v3.0.6
Su binary v3.0.3
Install BusyBox from the Market through one of the installers.
Step by step
Download the Automatic Root Enabler for the X3. For more recent versions I suggest checking his thread and the forum it's in as I may not be able to update this thread all the time.
Install the latest USB drivers for the X3. Search for the latest version of "HUAWEI Android Phones USB Driver" from the Huawei Downloads site.
Turn on USB Debugging from Settings -> Application -> Development on the X3.
Connect the X3 to your PC via microUSB.
Run the Automatic Root Enabler and it should start rooting your phone automatically.
It should finish off with something like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
There ya go! Your X3 should be happily rooted with CWM installed

CyanogenMod 7.2 (Unofficial)
There are a few things you have to know before installing CyanogenMod:
There is no official CM port for the X3.
This CM port came from the developers in the Spanish forum HTC Mania. It was originally built for the Huawei U8650 phone which, if you've read the first post in this thread, have got near identical ROM's to the X3. The guys from the German forum Android Hilfe have taken this port, tweaked and modified it to suit the X3. I don't have a comprehensive list of U8650 and X3 differences but suffice it to say the Android Hilfe folks are happy with the stability of this particular version.
As you can see it took me a while to crawl through Spanish and German pages, but with the help of Google Chrome's automatic translation I was able to make of what was going on. I will occasionally try and update this thread based on updates from the said external forums but I'd like to apologise in advance that I will probably not be able to do this quick enough after new releases come out.
External sources:
Original U8650 ROM from HTC Mania (Spanish)
Modified U8650 ROM for X3 from Android Hilfe (German)
CM7.2 Installation Instructions
The version in this tutorial is cyanogen_u8650-benru89-neu-samia99-2-mit-Wallpaper. the "Wallpaper" bit only means that this is the version with no wallpapers included. It's a lightweight version and contains no bloat.
Note: Please backup your stock ROM with CWM Recovery before installing CyanogenMod. I haven't found an updated version of the stock ROM elsewhere. Mine came with 2.3.4 (Vodafone branded) but the flashable ROM's I could find on the web were all 2.3.3 generic.
Make sure you root your phone as per the instructions in the previous post. You will need to use CWM Recovery.
Download samia99's cyanogen_u8650-benru89-neu-samia99-2-mit-Wallpaper.zip ROM and save it in the X3's SD card.
Reboot your phone into recovery. I use the Quick Boot app from the Market to do this.
Do a factory wipe, cache wipe and Dalvik cache wipe (from Advanced menu).
Select Install zip from SD card and select the ZIP file you've just copied.
Reboot after installation has completed.
For CyanogenMod configuration questions please see CM docs or CM-specific threads.
That's it! Enjoy!

good job!!! but is this version of cyan sluggish like the resT?

ziggyboy said:
This thread is about the Huawei IDEOS X3 (U8510) mobile phone.
Some apparent facts:
We need a dedicated X3 forum or at least a generic Huawei forum where all the numerous Huawei owners can get together.
Huawei U8650 ROM's are compatible with the X3's with some minor configuration differences. The U8650 port of CM7 is claimed to work well with the X3 and is faster than the stock ROM.
Much of X3 development activity have been on German and Spanish forums. Maybe because the English-speaking world got their X3's much later than continental Europe?
XDA sources:
Long X3 Q&A thread
External sources:
Android Hilfe X3 Forum (German)
Modaco Wiki X3 ROM's (though seems outdated)
HTC Mania U8650 Forum (Spanish)
Rooting Instructions
This was taken from lowskill's Automatic Root Enabler thread in Android Hilfe forums. Many thanks to him for this.
The Automatic Root Enabler for the X3 v1.0 should install:
ClockworkMod Recovery v4.0.1.5
Superuser v3.0.6
Su binary v3.0.3
Install BusyBox from the Market through one of the installers.
Step by step
Download the Automatic Root Enabler for the X3. For more recent versions I suggest checking his thread and the forum it's in as I may not be able to update this thread all the time.
Install the latest USB drivers for the X3. Search for the latest version of "HUAWEI Android Phones USB Driver" from the Huawei Downloads site.
Turn on USB Debugging from Settings -> Application -> Development on the X3.
Connect the X3 to your PC via microUSB.
Run the Automatic Root Enabler and it should start rooting your phone automatically.
It should finish off with something like this:
There ya go! Your X3 should be happily rooted with CWM installed. Should be easier to flash other ROM's at this point. Have yet to try CM7 though. Let me know how you all go from here and I'll update this thread.
Click to expand...
Click to collapse
thenks very mats just root my x3 its verry good ( bill from greece )

squidbutt said:
good job!!! but is this version of cyan sluggish like the resT?
Click to expand...
Click to collapse
Sluggish in comparison to the X3 stock or other CM versions?
I find this version more responsive than the X3 stock (which lagged quite a bit for me) but got no point of comparison with other CM versions/builds. Only thing I noticed is this CM build seems to eat more battery than my rooted stock. On both I had the same SetCPU and JuiceDefender settings.

Quick question: Rooting will delete my data?
Root removes the SIM LOCK?
Thank you.

cyborg007 said:
Quick question: Rooting will delete my data?
Root removes the SIM LOCK?
Thank you.
Click to expand...
Click to collapse
Rooting will not wipe your data, and will not remove your SIM lock. You will need to ask your carrier for an unlock code.

ziggyboy said:
Rooting will not wipe your data, and will not remove your SIM lock. You will need to ask your carrier for an unlock code.
Click to expand...
Click to collapse
Mine just gets stuck @ waiting for device after fastboot.
EDITED: Finally made it. using windows 7.. With XP I got stuck

Windows XP Driver Issue in Fastboot Mode
It's a driver issue. The entry for the bootloader interface in Windows XP is missing in the official Huawei USB driver package.
I've made a driver installer, which is based on the current Google USB driver. I only added the missing interface entries. It's tested and working in Windows 7 (64bit & 32bit) and Windows XP. Unfortunately I can't post the download link -.-
To prevent spam to the forums, ALL new users are not permitted to post outside links in their messages. After approximately eight posts, you will be able to post outside links. Thanks for understanding!
Click to expand...
Click to collapse

Thanks for the great work gathering useful info and make them in English.
I bought my U8510 in Taiwan and this CM7.2 mostly works with it, except the back camera freezes and FC after a few seconds or as soon as I take a photo.
The front camera is working perfectly though.
Other then that everything seems OK.
The bad thing is I didn't make a original ROM backup and I don't know to restore through the downloaded update.app file, as CM7 doesn't have that "upgrade from SD" option in settings.
Any insight is appreciated.

Managed to flash back to stock ROM by pressing Vol+ Vol- and Power Button with the update.app copied to SD card (/dload/)
Also I just found the latest official 2.3.5 ROM if anyone's interested:
(oops, unable to post link as I am a new comer, it's from huawei's office site).

Found it incorrectly sets the MAC address for the wifi device...
or its just different from the stock rom i had, had to reset the mac filter on my wifi to accept the new rom

Help
Can anyone upload the rom to MF since it will take me ages to download from rapidshare.. thank you.. btw..has anyone try the versions of this rom (there are 4 version on android-hilfe[dot]de..

Fantastic....just installed it with your instructions....no problem at all.
It's different language...how to change it???
How do I get google market on board now?
Thanks once again.
---------- Post added at 09:26 PM ---------- Previous post was at 08:52 PM ----------
Never mind.....market is already there. Just changed the language and its working flawlessly.

Thanks so much for this post man. I'm looking to buy an X3 to use as a spare mobile and it looks like it has awesome bang for buck ($89 here in Australia).

i´ve a Huwaei X3(U8510) and i put this ROM,works very nice! But i can´t send or recive MMS,i´m from Portugal and i Have Vodafone network.Can someone help me please...

i read this rom had problems with mms. Have you tried apnportugal

The rom that you're using has a different apn setting.
If you can find someone on your network using the same phone you can ask them to backup their apn settings and then restore the apn backup to your phone. There are many apn settings backup programs in the Market. If you cannot find the same phone on the same network then you can try apn settings from another android phone on the same network. But it has to be the same network.
If you know the mmsc that your provider (vodaphone in this case) uses then you can go into apn settings and edit it yourself. I'm sorry this part is going to be a bit jumbled since I do not have a x3 and cannot test if it works... but it should work. Open "voice dialing" or something similar and say "Open APN". It will open the settings you might have to enter your MSL to get into edit mode then change the mmsc portion. Once changed try sending a picture message.
For example my rom is for Sprint so my mmsc was
mms.sprintpcs.com
I had to change it to
mm.myboostmoblie.com
Hopefully this information gets you looking in the right direction. Good luck.

ziggyboy said:
Rooting will not wipe your data, and will not remove your SIM lock. You will need to ask your carrier for an unlock code.
Click to expand...
Click to collapse
If you replace the ROM with CM will the phone still be locked to Vodafone?
Losing the warranty of course

Hi Guys,
Trying to download the " cyanogen_u8650-benru89-neu-samia99-2-mit-Wallpaper.zip " but it's not available from the link on page one.
Can someone provide another download of this Rom, please?
Thanks

[Recovery] Micxon SX5 (MT6575) - CWM 5.0.2.6 mod recovery - 100% fully working

Hi all,
A friend of mine sent me his 'Made in China' phone branded as Micxon SX5 (I believe it is a brand name sold in Indonesia). It has 512mb RAM/512mb ROM with GB 2.3.6. I managed to pull the boot.img including other parts of the rom. With it, I managed to rebuild its scatter file, root and mod a CWM 5.2.0.6 tested 100% fully working (able to backup/restore/write new zip/factory reset)
Since there's nothing about this model here yet, I decided to share my work so that others with same model can continue to work on modding/remove bloatware/etc. Do take note that this model only has 512mb NAND and no EMMC (normally 4GB) versus other mt6575 models so, upgrading will be limited (unless someone can come out with slim rom) but you can always come out with custom rom
Please find below files useful for your flashing/rooting/mod purposes:
1) SX5 Micxon scatter
2) CWM 5.2.0.6 for SX5 only (credit to CWM team for the source)
3) Root - use the official Superuser-3.1.3-arm-signed-bin from here : http://androidsu.com/superuser/ - flash via CWM recovery
4) Original boot.img
5) Original recovery.img
To flash the recovery.img or boot.img, use SP Flash v 3.1206.01 minimum. Refer to Bruno's blog : http://bm-smartphone-reviews.blogspot.co.uk/2012/05/mt6575-flashing-tutorial.html (credit to Bruno) for the guide.
To make a full rom backup (need root), please refer to this post (credit to rua1 for the guide) - it's in Russian - need to use translator.
above files are based on rom :
Model number - SX5
Android version - 2.3.6
Baseband version - MAUI.11AMD.W11.50.SP.V13,2012/04/10 18:13
Kernel versioin - 2.6.35.7 [email protected] #1
Build number - G502H_TYIN_A_MICXON_ALPSGB2MPV2_V6S20120724
Custom build version - 1343125947
bug : auto-start not working. Any program with auto-start feature will need to be manually run after reboot. Still find a way to fix it (the reason why I root this phone)
Disclaimer : While these have been fully tested to work on my friend's devices (2 units), I do not guarantee it will work on yours. I do not take any responsibilities if your bricked your device/void your warranty by using any of these files. Rooting a device normally will void the warranty. Please check with your seller/shop regarding warranty.

How did you pull the boot and recovery img from the phone?

there are 2 methods :
1) read back via SP flash or;
2) use custom recovery with adb root
If using SP flash read back method, get a compatible scatter with same cpu/spec and readback from 0 - 1FFFFFFF (512mb) - this will give a full copy of rom, need to use hex editor to grab specific area eg preloader, dsp_bl, uboot, boot, recovery, etc. OR read only particular area for specific image. Some device may have to testpoint to get it loaded.
If using adb root method:
nand device image can be pull from /dev/block/mtdblockX
emmc device image can be pull from /dev/block/mmcblk0pX
this will give specific image for particular area.

it works with any 6575 ?
i have Micromax A90 with this configuration
MICROMAX A90
CPU ; MTK6575
GPU; POWERVR GX531
RAM; 512 MB
OP SYSTEM ; ANDROID 4.0.3 ( ICS)
KERNEL VERSION : 3.0.13
BUILD NUMBER :
SW VERSION : A90_0301_V1128
HW VERSION : A90_MAINBOARD_P3
BASEBAND VERSION : MAUI.11AMD.W11.50.SP.V13.92.
2012/05/02 17:43

BHARDIK said:
it works with any 6575 ?
i have Micromax A90 with this configuration
MICROMAX A90
CPU ; MTK6575
GPU; POWERVR GX531
RAM; 512 MB
OP SYSTEM ; ANDROID 4.0.3 ( ICS)
KERNEL VERSION : 3.0.13
BUILD NUMBER :
SW VERSION : A90_0301_V1128
HW VERSION : A90_MAINBOARD_P3
BASEBAND VERSION : MAUI.11AMD.W11.50.SP.V13.92.
2012/05/02 17:43
Click to expand...
Click to collapse
I'm afraid no.. It will not work on other model ... GB 2.3.6 uses yaffs2 format while ICS uses ext4 format so it will brick the phone if you try.
Please do not try to use on other model. Thanks.

Great...I am downloading the files now...will report later
Sent from my GT-I9070

mazlum78 said:
Great...I am downloading the files now...will report later
Sent from my GT-I9070
Click to expand...
Click to collapse
Oh no...I tried to flash CM recovery using SP but i am stuck. My laptop cannot identify the phone....after click DOWNLOAD...the SP searching my phone....cannot enter DOWNLOAD MODE
Sent from my GT-I9070 using xda premium

Help
i have micxon sx5
i follow the tutorial but can not instaled the driver
any solution for this?
thx

How o format Samsung Galaxy 2.

mazlum78 said:
Oh no...I tried to flash CM recovery using SP but i am stuck. My laptop cannot identify the phone....after click DOWNLOAD...the SP searching my phone....cannot enter DOWNLOAD MODE
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
pull out battery and usb, click download, put back battery then plug usb. Computer should find new device.
webi03 said:
i have micxon sx5
i follow the tutorial but can not instaled the driver
any solution for this?
thx
Click to expand...
Click to collapse
Already answered in PM.
turnerlaura05 said:
How o format Samsung Galaxy 2.
Click to expand...
Click to collapse
Sorry, don't you read the topic title? please go to SGS2 thread and ask there.

how to upgrade to ICS or JB? like cyanogenMod cusrom, MIUI cusrom or etc,,, can I?

sottaquadrat said:
how to upgrade to ICS or JB? like cyanogenMod cusrom, MIUI cusrom or etc,,, can I?
Click to expand...
Click to collapse
Need to port or compile slim version. Due to the limitation of system partition size on Micxon SX5 (256mb), ICS/JB is nearly impossible.

micxon sx5
thanks to person who initiated this thread on micxon sx5
i have an issue...hope someone has solution...i ve bought this handset sx5 in bali...
now am in india, issue is that phone doesnt work here...is it due to lock of phone or network or due unregistered imei number
someone please guide
thanks

can I have the kernel source of micxon sx5 please.....it'll help a lot in porting cyanogenmod for this and many other phones.

I have a phone that similarly with this mixcon sx5. It's a Cross A20, and now it can't boot up because I do a factory reset before.
Would you help me to share the complete rom back up for me?
Sent from my AD683G using xda app-developers app

To make a full rom backup (need root), please refer to this post (credit to rua1 for the guide)
Did you follow the above link to root them or there's flashable rooting zip?
Sent from my GT-S5830i using xda app-developers app

bayukra said:
I have a phone that similarly with this mixcon sx5. It's a Cross A20, and now it can't boot up because I do a factory reset before.
Would you help me to share the complete rom back up for me?
Sent from my AD683G using xda app-developers app
Click to expand...
Click to collapse
Looks the same .. rom version the same .. processor the same .. but IT IS NOT! Therefore sorry for unable to help you because Cross A20 is not SX5. Ask your seller if it's still under warranty.
jasliau said:
To make a full rom backup (need root), please refer to this post (credit to rua1 for the guide)
Did you follow the above link to root them or there's flashable rooting zip?
Sent from my GT-S5830i using xda app-developers app
Click to expand...
Click to collapse
Sorry but if you *really* read and *understand* what I've posted in the 1st post, I used the official superuser zip with custom recovery to root. Custom recovery is a powerful tool if you know how to use it.
The attached CWM was specifically built with SX5 kernel extracted from the original rom itself. It WILL not be compatible to other 5" whatever brand/model. Please stop asking question here if your device is not SX5. Flashing the attached CWM into other model may result blank/corrupted screen in recovery.

dpkdroid said:
thanks to person who initiated this thread on micxon sx5
i have an issue...hope someone has solution...i ve bought this handset sx5 in bali...
now am in india, issue is that phone doesnt work here...is it due to lock of phone or network or due unregistered imei number
someone please guide
thanks
Click to expand...
Click to collapse
Sorry as I understand SX5 units are all unlocked. Maybe you didn't activate international roaming? (assuming you're still using the same sim card?)
psychopac said:
can I have the kernel source of micxon sx5 please.....it'll help a lot in porting cyanogenmod for this and many other phones.
Click to expand...
Click to collapse
I would love to share if I ever found one but unfortunately there's no to avail.

aze2learn said:
Looks the same .. rom version the same .. processor the same .. but IT IS NOT! Therefore sorry for unable to help you because Cross A20 is not SX5. Ask your seller if it's still under warranty.
Sorry but if you *really* read and *understand* what I've posted in the 1st post, I used the official superuser zip with custom recovery to root. Custom recovery is a powerful tool if you know how to use it.
The attached CWM was specifically built with SX5 kernel extracted from the original rom itself. It WILL not be compatible to other 5" whatever brand/model. Please stop asking question here if your device is not SX5. Flashing the attached CWM into other model may result blank/corrupted screen in recovery.
Click to expand...
Click to collapse
Thanks, and I asked on behalf for my friend... I will try that method to help him.
Sent from my GT-S5830i using xda app-developers app

can i use this on other MT6575 based phone?

[q] bedove x12

Hi, I have the China Phone BEDOVE X12 MTK6577 1GHz with Android 4.0.9 and rooted. Is there any way to overclock it or flash a custom ROM?

x12
roxanna118 said:
Hi, I have the China Phone BEDOVE X12 MTK6577 1GHz with Android 4.0.9 and rooted. Is there any way to overclock it or flash a custom ROM?
Click to expand...
Click to collapse
dear roxana i have the same phone and i cant root it pls tell me how you did it
***@gmail.com
thanks

2cool said:
dear roxana i have the same phone and i cant root it pls tell me how you did it
***@gmail.com
thanks
Click to expand...
Click to collapse
I've removed your e-mail address from your post since it's never a good idea to post in publicly on the internet. Have users contact you via PM instead.

Hello.
I'm very interested in a cyanogenmod for the Bedove X12 too. The stock rom (4.04) is very laggy. I guess is almost impossible to get one because is a chinese unkwnown brand, right? Do you know if there is any compatible out there?

You can root this phone with MTK droid tools, it is easy.

Hi.
Yes, you are right. I found a tool here that easely rooted the phone (compared to HTC Explorer, that it was a very tedious process for a noob like me). But what I would like is to improve the stock room. The thing is that I saw this phone with a custom rom (ICS 4.0.9 I think) in videos and even in the store I bought it (pandawill), but eventually it cames with the original chinese Bedove one, and as I said, it's laggy as hell. Do you know some compatible from other phones working in this one?
ostres said:
You can root this phone with MTK droid tools, it is easy.
Click to expand...
Click to collapse

Bedove X21
I saw this phone on deal extreme Bedove X21. It has a lot of good stuff, but want to know if anyone has any feedback. Anything I should look out for?

my bedove cam rooted
morinasan said:
Hi.
Yes, you are right. I found a tool here that easely rooted the phone (compared to HTC Explorer, that it was a very tedious process for a noob like me). But what I would like is to improve the stock room. The thing is that I saw this phone with a custom rom (ICS 4.0.9 I think) in videos and even in the store I bought it (pandawill), but eventually it cames with the original chinese Bedove one, and as I said, it's laggy as hell. Do you know some compatible from other phones working in this one?
Click to expand...
Click to collapse
Hi I just received my phone. It arrived rooted.
There seems to be a few things stuck in Spanish language though. I wish I could put a custom rom in it to make sure everything is English.
It is a nice phone for the money!

roxanna118 said:
Hi, I have the China Phone BEDOVE X12 MTK6577 1GHz with Android 4.0.9 and rooted. Is there any way to overclock it or flash a custom ROM?
Click to expand...
Click to collapse
can you please explain to us how you rooted it?

dalevirgo said:
can you please explain to us how you rooted it?
Click to expand...
Click to collapse
just google for mtk tools.
you also need the drivers.
i think tparkyroot will work as well.
just read stuff first.
i used mtktools and it made the phone slow and trashed camera review.
i then rebooted recovery and wiped.
then all was ok.
this phone rocks!

larrygregandroid said:
I saw this phone on deal extreme Bedove X21. It has a lot of good stuff, but want to know if anyone has any feedback. Anything I should look out for?
Click to expand...
Click to collapse
For me it is just great: it came with Android 4.0.9 'ICS', perfectly perfoming and I've got no complains but the short lasting of the battery (~6~7 h) althought it comes with two.
The only issue is that I haven't figured to root it yet or to find specificly working ROMs (maybe CM or so may do) and that's why I'm here, scrolling down.
Highly recommended, anyway.
I'll keep on it.
====================
Esperanto (International Language):
Por mi, ĝi estas simple bonega: ĝi venis kun Androido 4.0.9 'Glaciaĵa Sandviĉo', funkcianta perfekte kaj mi havas neniun plendon krom tiu, ke la baterio daŭras malmulte (~6~7 horoj) kvankam ĝi venis kun du.
La sola afero estas, ke mi ankoraŭ ne lernis kiel radikigi ĝin aŭ kiel trovi specife funkciantaj ROM-oj (eble CM aŭ iu tiel taŭgus) kaj tial mi estas ĉi tie, legante.
Tute rekomendinda, tamen.
Mi daŭre esploros.

Hi,
Have you a backup of the original ROM of Bedove x12?
Thanks, I´m in troubles

larrygregandroid said:
I saw this phone on deal extreme Bedove X21. It has a lot of good stuff, but want to know if anyone has any feedback. Anything I should look out for?
Click to expand...
Click to collapse
I have it for three weeks now and it's great. The sound using earphones headset isn't really good but nothing you can't solve with equalizers or other apps (I use Google Play Music to play music )
I haven't rooted it yet (I'll need to explore more about it) but I really recommend it.
---------- Post added at 06:18 PM ---------- Previous post was at 06:10 PM ----------
sugusgig said:
Hi,
Have you a backup of the original ROM of Bedove x12?
Thanks, I´m in troubles
Click to expand...
Click to collapse
What happened, man? I'm really sorry
=====Esperanto (Int'l Language)====
Kio okazis, ulo? Mi bedaŭras...

What has happened is that instead of reading more, I've gotten into the material and as the TV show "I have bundled brown". I put a rom that does not work well, at least the recovery is active.
If someone has the original rom and can do for me a backup to restore my device, I'll thanks very much.
Lesson one: more read, less do.:crying::crying:
ChuSGC said:
I have it for three weeks now and it's great. The sound using earphones headset isn't really good but nothing you can't solve with equalizers or other apps (I use Google Play Music to play music )
I haven't rooted it yet (I'll need to explore more about it) but I really recommend it.
---------- Post added at 06:18 PM ---------- Previous post was at 06:10 PM ----------
What happened, man? I'm really sorry
=====Esperanto (Int'l Language)====
Kio okazis, ulo? Mi bedaŭras...
Click to expand...
Click to collapse

sugusgig said:
What has happened is that instead of reading more, I've gotten into the material and as the TV show "I have bundled brown". I put a rom that does not work well, at least the recovery is active.
If someone has the original rom and can do for me a backup to restore my device, I'll thanks very much.
Lesson one: more read, less do.:crying::crying:
Click to expand...
Click to collapse
Oh, my... I'm sorry for you.
If you find it, tell us so as to do it well and tell us what not to do...
===Esperanto (Int'l Language)===
Ho, ve... mi bedaŭras.
Se vi malkovras ion, avertu nin. Ankaŭ avertu pri kion ni ne devas fari

morinasan said:
Hi.
Yes, you are right. I found a tool here that easely rooted the phone (compared to HTC Explorer, that it was a very tedious process for a noob like me). But what I would like is to improve the stock room. The thing is that I saw this phone with a custom rom (ICS 4.0.9 I think) in videos and even in the store I bought it (pandawill), but eventually it cames with the original chinese Bedove one, and as I said, it's laggy as hell. Do you know some compatible from other phones working in this one?
Click to expand...
Click to collapse
Try booting into your recovery mode and do data/factory reset.
This WILL wipe your contact on you phone and such, but for me it deleted all the chinaware and took litterally ALL the lag away!
hope this helps!!

X12 CWM
Dear Members,
there is a CWM recovery for this phone, which I prepared based on bgcngm thread.
You can find it in the following link: http :/ / data. hu/ get/ 6183784/ Bedove-X12-CWM-recovery.img
(please remove the unnecessary spaces from the link, due to the fact that I am new an cannot post direct link.)

cappa72 said:
Dear Members,
there is a CWM recovery for this phone, which I prepared based on bgcngm thread.
You can find it in the following link: http :/ / data. hu/ get/ 6183784/ Bedove-X12-CWM-recovery.img
(please remove the unnecessary spaces from the link, due to the fact that I am new an cannot post direct link.)
Click to expand...
Click to collapse
Can you please explain how it is possible to install this?
I have a stock 4.0.9 Bedove X12, I rooted it, I tried to install this recovery with SP Flash Tools, it prompted me "BROM ERROR : S_DL_GET_DRAM_SETTING_FAIL (5054)"
Now I have not access to the CWM recovery, neither to the original recovery. The phone is still working in normal mode.
Is it possible to download original 4.0.9 firmware anywhere?

dema86 said:
Can you please explain how it is possible to install this?
I have a stock 4.0.9 Bedove X12, I rooted it, I tried to install this recovery with SP Flash Tools, it prompted me "BROM ERROR : S_DL_GET_DRAM_SETTING_FAIL (5054)"
Now I have not access to the CWM recovery, neither to the original recovery. The phone is still working in normal mode.
Is it possible to download original 4.0.9 firmware anywhere?
Click to expand...
Click to collapse
I modified the the recovery. (modifications are in bold.
The modification was about
ro.secure=1 --> 0
ro.allow.mock.location=1
persist.mtk.aee.aed=on
ro.debuggable=0 --> 1
persist.sys.usb.config=mass_storage,adb
persist.service.acm.enable=0
persist.service.adb.enable=1
persist.service.adb.root=1
And now, the explanation of the CWM installation.
If your phone is rooted, then you can use Mobileuncletools (free of charge and can be downloaded from PlayStore).
And follow the instructions, described here.
You can also see the pictures, attached to the post I linked.
Good luck!
If your phone is not rooted, then you will need to do a more compicated way, via SP Flashtool.
Let's try the first option (Mobileuncletools)

cappa72 said:
I modified the the recovery. (modifications are in bold.
The modification was about
ro.secure=1 --> 0
ro.allow.mock.location=1
persist.mtk.aee.aed=on
ro.debuggable=0 --> 1
persist.sys.usb.config=mass_storage,adb
persist.service.acm.enable=0
persist.service.adb.enable=1
persist.service.adb.root=1
And now, the explanation of the CWM installation.
If your phone is rooted, then you can use Mobileuncletools (free of charge and can be downloaded from PlayStore).
And follow the instructions, described here.
You can also see the pictures, attached to the post I linked.
Good luck!
If your phone is not rooted, then you will need to do a more compicated way, via SP Flashtool.
Let's try the first option (Mobileuncletools)
Click to expand...
Click to collapse
Thanks a lot, I have this phone (rooted 4.0.9) and now I finally have access to a CWM recovery. I used MobileUncleTools as you suggested to install your recovery file, and it was simple and fast.

Lenovo Tab 2 A10-70 MM 6.0 Custom Roms and Ports

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have opened this thread for the discussion of and sharing of specific information regarding the Lenovo Tab 2 A10-70F/L running on Android 6.0 MM.
This is to reduce the need to post in the "main" thread for this device which is HERE
The thread is open to ALL so please do not direct all question or comments towards me but ask and comment generally.
The thread should be restricted to Customisation and Porting of the Stock ROM.
Hints Tips and Tweaks.
The thread should Not include anything related to xposed PLEASE as this has a dedicated forum thread.
WARNING SPFlashTool and the use of will NOT be discussed in this thread. You are expected to know the very basics already like using SPflashTool, ADB, Fastboot and TWRP.
Simple Google search's will reveal all the info you need about the aforementioned.
The #2 post below this one will contain the leaked MM link TWRP and official Kernel source code etc etc
This OP will be updated as time goes by so I am open to suggestions

Where is everything??
KEY: F= WiFi only version L= CELLULAR version (takes a SIM card) MM= Marshmallow (Android version 6.0) LP= Lollipop (Android version 5.0) KK= KitKat (Android version 4.4)
Kernel Source: HERE
FOR USE WITH RECOVERY OFFICIAL STOCK OTA's 6.0 MM ROM's L & F versions: HERE
FOR USE WITH SPFlashTool OFFICIAL STOCK 6.0 MM ROM's L & F versions: A10-70F_S000214_M_170207_ROW.7z (WiFi) and A10-70L_S000214_M_170606_ROW.7z (SIM) Passwords and credits located HERE
TWRP RECOVERY "L" and "F" 6.0 MM compatible: HERE
Thanks to @Tzul
Empty image used to Wipe/Format your Userdata Using SPFashTool: HERE
Thanks to bigrammy
The Modified Boot.img's "Systemless SuperSU Ready" L & F versions: for the above Firmware's are HERE
Thanks to @Tzul again.
LEAKED STOCK MM ROM: HERE I Recommend using the Official Stock MM ROM's above but will leave this here for reference.
Thanks to @zMILWAUKEE again.
Noob's guide to Flashing the OFFICIAL STOCK MM ROM's L & F versions above:
NOOB's Read this post before you ask anything!!
Add Modified SPFlashTool Version OFFICIAL STOCK MM ROM's L & F versions from above:
Read this post HERE for more info
Notes: Flashing this stock MM will automatically encrypt your data and "systemless" root will not work due to the old style Mediatek boot.img format (MTK Headers) these are not supported by SuperSU. See above for compatible version boot.img by Tzul.
Thanks to @Tzul for all the info TWRP's and OTA's Too many to link to. :good:
Thanks to @suhridkhan for the Main device thread HERE
There are so Many others who deserve Thanks concerning this device but listing everyone would be impossible for me to do.
Any help or advice from other Mediatek threads would be most welcome but especially from these guys @superdragonpt @DerTeufel1980 @fire855 and others working on the M.A.D project https://github.com/MediatekAndroidDevelopers
xda background info here
Help input or advice with regard to maybe building from source porting from source would be invaluable Thanks.
CPU is mt8165 > aka mt6752 build enviroment but is The Quad Core Version aka mt6732
Lenovo Tab 2 A10 specifications and features:
10.1-inch Full HD IPS LCD display with 1920×1200 resolution
Wifi model: 1.5GHz quad core 64-bit MediaTek MT8165 processor, LTE model: 1.5GHz quad core 64-bit MediaTek MT8732 processor
2GB of RAM
16GB of internal storage, MicroSD expansion up to 32GB
171 x 247 x 8.9mm, 509g
8MP rear-facing camera
5MP front-facing camera
Non-removable 7200mAh battery
Android 4.4 KitKat (Kernel Source) 4.4 5.1 and 6.0 official ROM's
Dolby ATMOS 3D Surrond Sound
Available in Pearl White and Midnight Blue

User contributed Hints Tips and Fixes
These are placed here for convenience only and should by no means take the place of reading this thread thoroughly​
Custom Boot Animations HERE Posted by @chris5s
Enable Multi Window and Multi User Modes + SD_card Storage + Sound: HERE Posted by @coolbeans2016
SPFlashTool flashable Custom stock based ROM HERE Posted by @bigrammy
TWRP flashable Fix for Changing the Lockscreen Wallpaper on the above ROM HERE Posted by @bigrammy
Quick photo tut for newb's to remove the Sim icons etc on WiFi Only (F) models. HERE Posted by @bigrammy
Enable Double Tap to Wake "DTTW" HERE Posted by @chris5s

Custom Boot Animation
-Delete/rename/move original start.mp4 from system/media
-use a rooted file explorer to place new start.mp4 in the same folder
-Reboot and enjoy :good:
Download
Nice idea @bigrammy
Peace

chris5s said:
Custom Boot Animation
-Delete/rename/move original start.mp4 from system/media
-use a rooted file explorer to place new start.mp4 in the same folder
-Reboot and enjoy :good:
Download
Nice idea @bigrammy
Peace
Click to expand...
Click to collapse
First Poster :victory:
Thanks mate. :good:

Custom Stock ROM v1
Due to confusion and minor bugs that required some user input I have removed the TWRP version and replaced it with this SPFlashTool version.​
Before Flashing:
This ROM will wipe your internal sd_card including Pictures, Music, etc, etc on it. BACKUP First You have been warned!!!
This ROM is NOT a full Android upgrade so please make sure you are already on Android 6.0 (MM)
Whats Different bigrammy??
boot.logo Now Black instead of the White burning out your eyeballs one.
bootanimation. Now Black Pixel animation.
Default wallpapers Desktop and lockscreen Now Pixel Blue (no more boats)
Pixel Launcher
Assistant enabled
Sony id enabled (Allows you to install some Sony app's from the play store like keyboard)
Ported Sony Music Album and Video directly from my Sony C4 mt6752 device.
These are Just to name a few but has lots of other minor mods I have forgotten about.
Installing and things to Note:
MM TWRP is included in the ROM.
Please flash the entire ROM or I/we will not know whats causing the problems should there be any.
After the flash is complete boot to recovery ONLY and flash Magisk Latest Stable release HERE
First time boot takes 10 minutes so do not panic. As soon you see the boot animation go make a cup of coffee and wait.
It will boot guaranteed if you see the bootanimation. :fingers-crossed:
The reason it seems to take so long is that the boot animation continues until fully booted so you do not see the usual dialog box "updating app 1 of xxx" etc
Ensure you update Google Play Services via the playstore (Doing this First ensures smooth and uninterrupted updates of the other playstore apps)
Update all other app's listed in playstore/my apps
Note app's like trackid will only display in portrait as our device res is not officially supported.
Credit to HootanParsa for the Awesome file explorer his thread is HERE Please leave your thanks there too.
Ensure to check all app permission and choose the Pixel launcher as default.
See post #3 for instruction on hiding the SIM icon in the notifications bar.
Lastly But Most important please LEAVE SOME FEEDBACK
I know it will not be to everyone's tastes so feel free to mod add remove install what you like.
Download Link:
Download HERE from G-Drive
Screenshots:
Lockscreen:
Desktop:
App drawer:
Music Portrait:
Music Landscape:

@bigrammy I'm sure it's on your to-do list, but how about, in the first post or placeholder posts, links to
- TWRP
- Original MM ROM
- Individual mods and/or guides to customisations/tweaks
Otherwise i guess they run the risk of getting swallowed up in the thread...Not that that has ever happened
Cheers

chris5s said:
@bigrammy I'm sure it's on your to-do list, but how about, in the first post or placeholder posts, links to
- TWRP
- Original MM ROM
- Individual mods and/or guides to customisations/tweaks
Otherwise i guess they run the risk of getting swallowed up in the thread...Not that that has ever happened
Cheers
Click to expand...
Click to collapse
Hi chris5s,
Yes good point & I have been mulling this over since I started this dedicated MM 6.0 thread.
I really don't want to be dragged into the world of noobs and SPFlashtool, driver installation, flashing, etc as they will swear blacks white and whites black regardless of how well it's all explained. So I will put up the links along with a strong warning that I/we will not expand on SPflashTool drivers etc etc for installation of the Original MM ROM and TWRP recovery.
All the Best.
Edit: All Done anything I missed let me know.

@bigrammy Excellent work on the thread.
Since I don't have this tablet anymore, my information are probably not updated. This is an amazing device, and I enjoyed every bit of it. It's still running strong with my younger brother.
I shall put a link to this thread in mine so that people can come here for most current information.

Great job on the new thread, looks great and should streamline the process of the noobs and experienced alike find what they need and point them in the right direction. Great tutorial. The reason Android will keep growing is because of people like ones that have been involved with the dev work on this tablet, and all the projects here on XDA..

I was just comparing my A10-70F running 6.0.1 with my mother's which is on stock 5.0.1 and found that my screen was distinctly dull and grey in comparison. After removing f.lux and checking all the display and battery settings were the same I was stumped.
That was until I discovered that the brightness slider setting does absolutely nothing on mine!
Does it work for everyone else?

@mr-br working fine here :good:

@mr-br People with non-working brightness sliders on this tablet usually have enabled auto-brightness somehow, which does not work, as the tablet doesn't have an ambient light sensor. If you disable auto-brightness (for which you might need an app, as there are no controls for it in the standard settings app), then the brightness slider should work again.

Yes tx I found this seems to be a generic issue with this tablet. Found the app via a thread on the lenovo forum.
"I just installed the App "Best Display Brightness Level" from "Top10Labs" out of the GPlay-Store, then start it and uncheck the "Auto Brightness" tick Smiley Happy After that, i can use the built in brightness slider, even after uninstall the app Smiley Happy"
My screen still has rather a blue cast though ...

Has anyone installed this ROM coming from (rooted) stock 5.0.1 yet?

gtallmadge said:
Has anyone installed this ROM coming from (rooted) stock 5.0.1 yet?
Click to expand...
Click to collapse
To which ROM do you refer??
If you mean the Stock then pretty much everyone I guess.
If you mean my custom stock then nobody has even bothered to report anything back at all.
I am pretty sure it would be just fine but until a few report back to it's OK I cant offer any Guarantees.
If your use to SPFlashTool then restoring the tablet would not be an issue anyway.

Yes, I do mean the stock Lenovo 5.0.1. Another question would be on your custom ROM 6.0, are there any issues for Tab2 A10-70F? As I have observed, you and others in Europe have the L version, which is not available to us in the US. Also, thank you for your hard work and guidance for the device, it is appreciated.

gtallmadge said:
Yes, I do mean the stock Lenovo 5.0.1. Another question would be on your custom ROM 6.0, are there any issues for Tab2 A10-70F? As I have observed, you and others in Europe have the L version, which is not available to us in the US. Also, thank you for your hard work and guidance for the device, it is appreciated.
Click to expand...
Click to collapse
Most of us and me included are on the "F" version I think..
It is just that the L firmware also works on our F versions.
Maybe I should make it clear that my ROM is the WiFi version only as I stripped some of the RIL parts out of the ROM

Good news! I look forward to flashing your ROM and getting 6.0 on my tablet. Thank you for your patience in addressing my concerns and questions.

gtallmadge said:
Good news! I look forward to flashing your ROM and getting 6.0 on my tablet. Thank you for your patience in addressing my concerns and questions.
Click to expand...
Click to collapse
No problem
Be sure to let us know how it all goes. :fingers-crossed:
PS: Is that the Fire Phone you have?? I have just bricked my second Fire Phone trying unlock that darn bootloader again. I maybe able to recover this one though as there are still some signs of life unlike the last one

[Cross Porting] Spreadtrum SC7731g | SC7731c | SC9830 | SC8830 Cross Porting

Hello everybody. This is Yeasir Arafat. In this video I am going to show you how to cross port on Spreadtrum SC7731g | SC7731c | SC9830 | SC8830.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
You can port :
Spreadtrum SC7731c to SC7731g
Spreadtrum SC7731g to SC7731c
Spreadtrum SC8830 to SC7731c/SC7731g
Spreadtrum SC7731 to sC8830
Reduired Files:
1.Zarchiver
2. Root Explorer
Download these apps from google.
Now watch this : Click Here
For some roms you need to port boot.img.
Boot.img Porting : Click Here
This tutorial is tested on IDOS rom. [ SC7731c to SC7731g]
To join us on facebook : SU Droid Tech
Credits :
Yeasir Arafat
SU Droid Tech
If you have any question about this topic, please comment below.

I need Help
Hi Sir, i need your help to port SOME rom to my device sc7731 marshmallow based, i have ported a twrp 3.0.2 working perfectly but now i want to create a custom rom like cm13 or RR for my device, i have tried your porting method, anothers posts, but, nothing working for me,when i use the ported boot.img, not working, it stuck at bootlogo.
I tried porting RR-M rom using my stock boot.img, it passes the bootlogo screen but it stuck on the bootanimation, i have read many posts and i have ported the rom replacing libs,bin,......etc..... i'm sure that the problem is on the Boot.img

Filarhq said:
Hi Sir, i need your help to port SOME rom to my device sc7731 marshmallow based, i have ported a twrp 3.0.2 working perfectly but now i want to create a custom rom like cm13 or RR for my device, i have tried your porting method, anothers posts, but, nothing working for me,when i use the ported boot.img, not working, it stuck at bootlogo.
I tried porting RR-M rom using my stock boot.img, it passes the bootlogo screen but it stuck on the bootanimation, i have read many posts and i have ported the rom replacing libs,bin,......etc..... i'm sure that the problem is on the Boot.img
Click to expand...
Click to collapse
there is a nice guide on Advan S4p official Group on FB download the ROMs from there only if you download ROMs from somewhere else you need to do do lot of changes to make it compatible to your device. As you you think the problem is in the boot.img yes there might ba a lot chances. Have you replaced the modules in ramdisk/lib while porting boot.img and make sure that you replaced the mali.ko also grab it from System/lib/modules of stock ROM.

Jitheshwar said:
there is a nice guide on Advan S4p official Group on FB download the ROMs from there only if you download ROMs from somewhere else you need to do do lot of changes to make it compatible to your device. As you you think the problem is in the boot.img yes there might ba a lot chances. Have you replaced the modules in ramdisk/lib while porting boot.img and make sure that you replaced the mali.ko also grab it from System/lib/modules of stock ROM.
Click to expand...
Click to collapse
Should I seriously replace ramdisk/lib/modules/mali.ko with system/lib/mali.ko? I mean ... the mali.ko of my system weighs 57 bytes while that of my stock boot.img weighs 4mb (sorry for my bad english, i'm from Ecuator)

Filarhq said:
Should I seriously replace ramdisk/lib/modules/mali.ko with system/lib/mali.ko? I mean ... the mali.ko of my system weighs 57 bytes while that of my stock boot.img weighs 4mb (sorry for my bad english, i'm from Ecuator)
Click to expand...
Click to collapse
Is there a mali.ko in your stock boot.img then use it to port don't replace with the one in system/lib/modules. In my case I don't have mali.ko in my boot.IMG then I had to use the one from system.
have you read the guide in Advan Group? If not then go through it once you'll get some clarity. Don't fear about size the mali.ko file will be that size only it is the module which handle GPU. And for the language don't bother because what knowledge you have does matters it doesn't matter that how you share it. Never feel sorry for little things like this you can manage to speak and understand more than one language it's great.

Jitheshwar said:
Is there a mali.ko in your stock boot.img then use it to port don't replace with the one in system/lib/modules. In my case I don't have mali.ko in my boot.IMG then I had to use the one from system.
have you read the guide in Advan Group? If not then go through it once you'll get some clarity. Don't fear about size the mali.ko file will be that size only it is the module which handle GPU. And for the language don't bother because what knowledge you have does matters it doesn't matter that how you share it. Never feel sorry for little things like this you can manage to speak and understand more than one language it's great.
Click to expand...
Click to collapse
thanks i had successful ported a PAC-MAN rom to my device, but now..... i need some help to fix wifi, camera, bluethoot bugs ;-; but... i think is great, it boot up :"v, and have a question, i have storage bug, gallery, music, and a lot of apps can't access to my storage but "diskinfo" app can read the partitions

Filarhq said:
thanks i had successful ported a PAC-MAN rom to my device, but now..... i need some help to fix wifi, camera, bluethoot bugs ;-; but... i think is great, it boot up :"v, and have a question, i have storage bug, gallery, music, and a lot of apps can't access to my storage but "diskinfo" app can read the partitions
Click to expand...
Click to collapse
it's because of boot.img you need to compare the following files of port files with stock files and modify them accordingly
fstab.sc8830
init.sc8830_ss.rc (the related lines may be found in stock init.storage.rc).
There are some guides in Advan Group for fixing bugs like Wi-Fi and camera see in the files section you'll find solutions/guides and also search in the group if you have any doubt which may be already asked by someone else by this way you'll find answers quickly use the logcat extreme app for seeing logs which will help you too see what causing the issue them you can easily resolve the bug.

Jitheshwar said:
it's because of boot.img you need to compare the following files of port files with stock files and modify them accordingly
fstab.sc8830
init.sc8830_ss.rc (the related lines may be found in stock init.storage.rc).
There are some guides in Advan Group for fixing bugs like Wi-Fi and camera see in the files section you'll find solutions/guides and also search in the group if you have any doubt which may be already asked by someone else by this way you'll find answers quickly use the logcat extreme app for seeing logs which will help you too see what causing the issue them you can easily resolve the bug.
Click to expand...
Click to collapse
thanks a lot, it was exactly what i was suspecting of the storage bug, i can understand what you say, but a little bit, i need to compare it, yes, luckily i have an init.storage.rc file located on my stock boot, what i don't understand is comparing and changing the lines, and.... please help me to solve the wifi & bluethoot issue ;-;

Filarhq said:
thanks a lot, it was exactly what i was suspecting of the storage bug, i can understand what you say, but a little bit, i need to compare it, yes, luckily i have an init.storage.rc file located on my stock boot, what i don't understand is comparing and changing the lines, and.... please help me to solve the wifi & bluethoot issue ;-;
Click to expand...
Click to collapse
Next time PM me don't reply here.
Compare the following lines with the fstab.sc8830 of your stock file
Code:
# /devices/sdio_sd/mmc_host/mmc1/mmc1:*/block/mmcblk1 auto auto defaults voldmanaged=extSdCard:auto,encryptable=userdata
# /devices/20200000.usb/usb auto auto defaults voldmanaged=usbdisk:auto
/dev/block/zram0 auto swap defaults zramstreams=4,notrim
and in init.sc8830_ss.rc see if there any lines that match with the lines of init.stotage.rc it may look like lot of mess but you have to go by trail and error the difference is because of different Mounting structure of SD card from marshmallow you can mount external SD card as either internal (you install apps on external) or as portable used for storing files only can't be used for installing apps. even apps can't store the data on SD card.
hey there is another way of fixing storage bug that is with the help of SU.D script (you can see it in system partition after flashing the ROM) the script is IntextSDcard or something but I don't have that script few months back while porting CM13.1 I have read in Advan S4p official group about that but unable to fix but I think at that time I don't have sufficient knowledge anyway I just left porting because there are some bugs that can't be fixed in my device because my device is shipped with KitKat. I think,but not sure, this was already included in the ROM by the one who made it compatible with our device.

Screen goes black.......
sudroidtech said:
Hello everybody. This is Yeasir Arafat. In this video I am going to show you how to cross port on Spreadtrum SC7731g | SC7731c | SC9830 | SC8830.
You can port :
Spreadtrum SC7731c to SC7731g
Spreadtrum SC7731g to SC7731c
Spreadtrum SC8830 to SC7731c/SC7731g
Spreadtrum SC7731 to sC8830
Reduired Files:
1.Zarchiver
2. Root Explorer
Download these apps from google.
Now watch this : Click Here
For some roms you need to port boot.img.
Boot.img Porting : Click Here
This tutorial is tested on IDOS rom. [ SC7731c to SC7731g]
To join us on facebook : SU Droid Tech
Credits :
Yeasir Arafat
SU Droid Tech
If you have any question about this topic, please comment below.
Click to expand...
Click to collapse
Sir,
Everything working in my phone but screen goes black imean to say phone is running but not give display output plz help
---------- Post added at 02:50 PM ---------- Previous post was at 02:49 PM ----------
Sir,
Everything working in my phone but screen goes black imean to say phone is running but not give display output plz help

Hrishabh Sharma said:
Sir,
Everything working in my phone but screen goes black imean to say phone is running but not give display output plz help
---------- Post added at 02:50 PM ---------- Previous post was at 02:49 PM ----------
Sir,
Everything working in my phone but screen goes black imean to say phone is running but not give display output plz help
Click to expand...
Click to collapse
Have you ported the boot.img and make sure the split_img is your stock's

Jitheshwar said:
Have you ported the boot.img and make sure the split_img is your stock's
Click to expand...
Click to collapse
I'm using stock boot.IMG everything working but blackscreen

Hrishabh Sharma said:
I'm using stock boot.IMG everything working but blackscreen
Click to expand...
Click to collapse
let me know your chipset, kernel, and based system, are you triying to port different API?
whatever, if you want a rom you have to port the boot.img, if the system boot up with your stock boot.img, you need to port the rom's boot.img to fix bugs

Jitheshwar said:
Have you ported the boot.img and make sure the split_img is your stock's
Click to expand...
Click to collapse
Filarhq said:
let me know your chipset, kernel, and based system, are you triying to port different API?
whatever, if you want a rom you have to port the boot.img, if the system boot up with your stock boot.img, you need to port the rom's boot.img to fix bugs
Click to expand...
Click to collapse
Sc7731 chipset micromax cancas spark 3:
I'm porting cm based RR ROM......
And also plz tell me how fix rotation, camera not connect,no sound in loud speaker,and ROM speed slow how fix all bugs

Hrishabh Sharma said:
Sc7731 chipset micromax cancas spark 3:
I'm porting cm based RR ROM......
And also plz tell me how fix rotation, camera not connect,no sound in loud speaker,and ROM speed slow how fix all bugs
Click to expand...
Click to collapse
Follow the guide of KitKat for fixing bugs some of the bugs can't be fixed easily for ex: rotation (don't know why fix provided by dev isn't working it's may be a problem in boot.img) for more help look in Advan group there are posts and docs for fixing bugs and porting the ROM properly.

sir my recovery image is recovery-sign img, I can't install with spd flash tool if I change its stock recovery with twrp, and even fastboot. not any error message appear but it like stuck loading. is it still possible to my phone can have root access here
thanks in advance

video down.