Database Info

DBDATA.RFS "problem"

Hi,
I was flashing XXKPE and everything goes well. I goes in recovery mode and find the following message :
_ can't access to '/system/csc/SER/system/'
I don't see it at the first so I tried to wipe data/factory reset and it show these messages :
_ Formating /dbdata
_ E:format_volume: rfs format failed on /dev/block/stl10/
With this error the smartphone go in "boot loop". I've search about these messages in google and i've found a topic for I9000 where they say that it can be fixed flashing dbdata.rfs. I've tried some stock rom (XXKPE/XXKQ/XXKB1/XXKB3/XXJL9) and none of them has this file. someone can help me? Or saying in which stock rom I can find it or taking it from your smartphone and put in fileserver/hotfile or megaupload. Thank you.

Which steps did you follow? Try doing everything: do a re-partition first (PIT, probably you need to remove the battery to shut the phone down and put it again in download mode) and then flash the other three files (PDA,PHONE,CSC).

I do like always using heimdall and the same procedure that works everytime. Go in download mode, flash the files about XXKPE and everygo without any problem. Ok go in recovery mode to make the changes and do the wipe but I've found that problems that i've spoke before.

Ok I flashed XXKPE and XXKPQ ignoring the error and I've installed Skin1980's CWM . Now when I do wipe data he say : "Error mounting /datadata !" and skip his format. The cellphone go in loop at the boot like before.

Did you check re-partition? I've never tried heimdall, but I think this problem should be solved with a proper flash (with a re-partition).
I don't know any other way to solve this problem.
==
edit:
By the way I don't think skin1980's CWM is compatible with KPQ. Try this

I assumed you saw this thread in the i9000 forum? forum.xda-developers.com/showthread.php?t=751827
Try to flash a stock ROM again to see if this happens.

Yes I've checked the repartition. Thank you anyway

Well, I've installed amit.bagaria's CWM and using it seems that i can perform wipe operation but he spoke about /datadata/ formating and didn't spoke about dbdata. Everything goes well so i thought to install vurrutRom (it's for XXKPQ) and the installation procedure goes well not even a problem. Perfect!!! No it seems to go in loop again (I've waited about 10 minutes). Mhhh ok he format everything and go to loop.. try to install XXKPE. I do it and it show up the first message
"can't access to '/system/csc/SER/system/'"
etc...

Ok using amit.bagaria's CWM taking root permission etc it seems to format /datadata but he can't mount it and even /sdcard...have anyone some suggestions ?

@!n0x : in that link they speak about mount a file .rfs that you've in your PC on your PC and not how to mount in your phone. Thank you anyway

Have you tried manually mounting it via CWM? Try the CWM from the Universal CF-Root by ganesh (if I'm not wrong)

[SOLVED] I've installed XXKB3 and every goes well . Thank you for help/suggestion etc.

Cereal, where did you find this rom?
I'm facing the very same soft-brick problem on the I9003. I've downloaded more than 5 different roms, but none of them have the dbdata.rfs...
Thanks in advance!
- Fabrício

fabricioferreira said:
Cereal, where did you find this rom?
I'm facing the very same soft-brick problem on the I9003. I've downloaded more than 5 different roms, but none of them have the dbdata.rfs...
Thanks in advance!
- Fabrício
Click to expand...
Click to collapse
here is if you didn't found it and if you still need it.

Cereal_84 said:
@!n0x : in that link they speak about mount a file .rfs that you've in your PC on your PC and not how to mount in your phone. Thank you anyway
Click to expand...
Click to collapse
Search for latona_20110114.pit, download and flash I9003XXKB3

stock zip

Hi!!! I m having bootloop problem been trying to flash through odin but not successful getting all kinds of errors or unable to mount, in the 3e recovery. I have manage to install CWM recovery so now I wanna try to use CWM to update or install zip through sdcard, the problem is I m unable to locate stock 2.2 in zip format.
Would appreciate if anyone can give me a link.... Thanks
Been trying for 2 days to get this damn phone to function, probably have to sit in the drawer with my hard bricked SGS. After this I hope my Skyrocket won't join them

ndmuni said:
Hi!!! I m having bootloop problem been trying to flash through odin but not successful getting all kinds of errors or unable to mount, in the 3e recovery. I have manage to install CWM recovery so now I wanna try to use CWM to update or install zip through sdcard, the problem is I m unable to locate stock 2.2 in zip format.
Would appreciate if anyone can give me a link.... Thanks
Been trying for 2 days to get this damn phone to function, probably have to sit in the drawer with my hard bricked SGS. After this I hope my Skyrocket won't join them
Click to expand...
Click to collapse
You cannot flash stock firmware through odin.Neither Froyo nor Gingerbread.
Sent from my GT-I9003 using XDA

If you have correct single file rom like .tar file for this phone go to download mode and flash the from with odin in PDA only.

I have been using odin to flash DXKF1, XXKPE and i can't remember whatelse over the last 36hrs. The trouble is, after odin passes the phone does not load, it shows a whole lot of red line errors and it boots into bootloop. I think its a problem with the internal memory chip cos CWM can install Posiedon rom but i get the same bootup problem.

ndmuni said:
I have been using odin to flash DXKF1, XXKPE and i can't remember whatelse over the last 36hrs. The trouble is, after odin passes the phone does not load, it shows a whole lot of red line errors and it boots into bootloop. I think its a problem with the internal memory chip cos CWM can install Posiedon rom but i get the same bootup problem.
Click to expand...
Click to collapse
You need to post the whole lot of red lines.No one can debug it without knowing the error.if it happens too fast just click a pic with a camera
Sent from my GT-I9003 using XDA

devilhell007 said:
You need to post the whole lot of red lines.No one can debug it without knowing the error.if it happens too fast just click a pic with a camera
Sent from my GT-I9003 using XDA
Click to expand...
Click to collapse
Here's what happen when i use odin to flash DXKF1, after PASS when the phone reboots:
Movi_check start..!!
movinand read fail
movinand checksum confirmation fail
Ifs pass open fail
--movi_checking undone...
update media please wait
E: Can't mount/dev/block/mmcblk0pl
(no such file or directory)
E:copy_dbdata_media_can't mount SDCARD
Your storage not prepared yet Please use UI menu
for format and reboot action
Copy default media content failed..
If i use CWM to install zip, it will start installing and upon reboot i get the "can't
mount system sdcard and data" and phone boots into CWM recovery

[Q] Please HELP ME

Hi Guys
I have an samsung galaxy sl gt-i9003 it had stock rom 2.3.6 ddlf2 ,after i tried to root it with CF-Root for most I9003 firmwares DDLF2_CFROOT-05-07-2012.tar (CWM 5.0.2.8) it flashed succesfully and my phone booted then i copied the RemICS-JB v3.1 File to memory card after i tried to flash the rom according to the instructions it went to an boot loop
then when i factory reseted many times no use the i tried to come back to stock rom ddlf2 after it completed it showed this error
E:format_volume:rfs format failed on /dev/block/stl10
somekind of that error

try to flash with odin 1.83

it's using MTD partition layout, first flash will format your phone partition and reboot itself.(based on CM10A4 instruction)
After that flash again with the same file, then flash gapps.

alex88510 said:
it's using MTD partition layout, first flash will format your phone partition and reboot itself.(based on CM10A4 instruction)
After that flash again with the same file, then flash gapps.
Click to expand...
Click to collapse
hi alex
to move to stock rom should i flash any latona.pit with firmware files in odin

karthik gowtham said:
hi alex
to move to stock rom should i flash any latona.pit with firmware files in odin
Click to expand...
Click to collapse
Flash pit file then the firmware files WITHOUT bootloader file.
Sent from my GT-I9003 using xda app-developers app

oh man i searched all the post about the above error and downloaded many file but the good thing is my phone boots up but the bad thing is it STUCK in a boot loop

karthik gowtham said:
oh man i searched all the post about the above error and downloaded many file but the good thing is my phone boots up but the bad thing is it STUCK in a boot loop
Click to expand...
Click to collapse
This could solve your problems
Go to Download Mode
Flash xxkpe leaving the boot loader blank through odin form pc
fill the rest
wait for complete installation
reboot in recovery
wipe everything
reboot in download mode
again flash xxkpe now with bootloader
after flashing completed wait for reboot
now reboot in download mode
flash ddlf2 via pda
wait for completion of flashing
reflash bam 15 cr 7 kernel
http://forum.xda-developers.com/showthread.php?t=1355675
let it reboot.
follow the instructions given below
http://forum.xda-developers.com/showthread.php?t=1869820&page=44
thats it.
if your internel memory is corrupted then you can try this as a last chance
because it is very precise
http://forum.xda-developers.com/showthread.php?t=1651619
I recommend you to visit the samsung service centre if your internel memory is corrupt
its in egmore
very near the railway station
or else pm me

[Q] Problem about /datadata

Can't mount datadata
Today afternoon i tried to flash CM9/10(before that my I9003 had Android 2.3.6 XXLE4)... i wasnt successfully... so I wanted to use my CWM Backup... first I flashed the Clockworkmod Recovery about Stock ROM + CF-ROOT and then I used the backup
And there was the problem... at the end of the restoring progress, I read 'Can´t mount datadata'.... the mobile couldnt reboot... it stayed on the Startupscreen. i couldnt find any helpful threads about searching in the web... Do anyone know what there happened and how I can solve this problem?
My English isnt so good... I hope you can understand what i wrote....
EDIT: I can get into the Recovery and Download Mode

Snivy13 said:
Today afternoon i tried to flash CM9/10(before that my I9003 had Android 2.3.6 XXLE4)... i wasnt successfully... so I wanted to use my CWM Backup... first I flashed the Clockworkmod Recovery about Stock ROM + CF-ROOT and then I used the backup
And there was the problem... at the end of the restoring progress, I read 'Can´t mount datadata'.... the mobile couldnt reboot... it stayed on the Startupscreen. i couldnt find any helpful threads about searching in the web... Do anyone know what there happened and how I can solve this problem?
My English isnt so good... I hope you can understand what i wrote....
EDIT: I can get into the Recovery and Download Mode
Click to expand...
Click to collapse
EDIT: I can get into the Recovery and Download Mode: Solution Hard reset button
Re-flash and restore your backup

TTMaster said:
EDIT: I can get into the Recovery and Download Mode: Solution Hard reset button
Re-flash and restore your backup
Click to expand...
Click to collapse
Maybe I wrote it wrong again... I CAN get into Download Mode and Recovery Mode... I also tried to flash a Stock-ROM and then restore the backup... but the phone cant start after I flashed the Stock-ROM or after restoring the backup...
Maybe my way is wrong...
I do it like that:
1.Start Odin
2.Open PDA and choose the XXLE4 Stock ROM
3.Start
4.After this was done I try to restart...
I think there must be a wrong step...

Snivy13 said:
Maybe I wrote it wrong again... I CAN get into Download Mode and Recovery Mode... I also tried to flash a Stock-ROM and then restore the backup... but the phone cant start after I flashed the Stock-ROM or after restoring the backup...
Maybe my way is wrong...
I do it like that:
1.Start Odin
2.Open PDA and choose the XXLE4 Stock ROM
3.Start
4.After this was done I try to restart...
I think there must be a wrong step...
Click to expand...
Click to collapse
1.- Start Odin 1.85
2.- PIT Latona_20110114.pit (select Repartition + Auto Reboot + F. Reset Time)
3.- Remove battery + Download mode
4.- Odin - PDA XXLE4 Stock ROM
Good Luck

Error mounting /datadata
TTMaster said:
1.- Start Odin 1.85
2.- PIT Latona_20110114.pit (select Repartition + Auto Reboot + F. Reset Time)
3.- Remove battery + Download mode
4.- Odin - PDA XXLE4 Stock ROM
Good Luck
Click to expand...
Click to collapse
I tried it... I flashed Latona pit with those settings, and then, after I removed Battery one time, I flashed the Stock ROM, but there was a boot loop again.
After there was a boot loop, I also tried to flash CWM and then restore the backup, but at the end I saw again:
Restoring datadata...
Error mounting /datadata!
Skipping format...
Can't mount /datadata!

Snivy13 said:
I tried it... I flashed Latona pit with those settings, and then, after I removed Battery one time, I flashed the Stock ROM, but there was a boot loop again.
After there was a boot loop, I also tried to flash CWM and then restore the backup, but at the end I saw again:
Restoring datadata...
Error mounting /datadata!
Skipping format...
Can't mount /datadata!
Click to expand...
Click to collapse
Yesterday in the evening I successfully flashed a Stock ROM with 4 parts(Bootloader, PDA, Phone, CSC), then I flahsed a 1 part XXLE4 and the CF-ROOT and restored the backup over CWM Now my phone works normally
Thank you for all those who helped me there

[HELP] galaxy ace plus soft-unbrick

i've tried this guide and some others on the net, downloading files over files, tried with odin3 v1.85 and v3.09.
putting every time the phone in download mode and flashing the .tar.md5 file when doing it without the pit file it says "use the default pit", attaching the pit it gives a "secure check fail: id 0x95" and one time it displays "partition table doesen't exist".
It would be nice if anyone could help me as soon as possible!!:good:

I think ur partition memory currepted .....
Hit thanks if i helped

i thought it too couse it can't be that it says "partition table doesen't exist", if you know how to fix it, it would be great

ok
did you downloaded the correct firmware from sammobile.com ???
What were you doing when you bricked your phone??​

yes, i did, but it also didn't work i tried different versions but niether that worked.
I bricked my phone flashing through cwm the same rom (cm10.2 by vickig coolest) in order to reinstall the gapps which weren't working before.
Now i tried flashing cm10.2 by dirty developer and it says "e: can't open /sdcard/cm-10.2-20131216-DirtyDev-trebon.zip" if someone could give me a working backup (cwm 6.0.3.3) i could try to restore it.

Dude
While flashing stock firmware open odin and click on nandroid erase all
And then flash firmware
After reboot do a hard reset
Hope it works
Sent from my GT-S5282 using Tapatalk