Hi,
I was flashing XXKPE and everything goes well. I goes in recovery mode and find the following message :
_ can't access to '/system/csc/SER/system/'
I don't see it at the first so I tried to wipe data/factory reset and it show these messages :
_ Formating /dbdata
_ E:format_volume: rfs format failed on /dev/block/stl10/
With this error the smartphone go in "boot loop". I've search about these messages in google and i've found a topic for I9000 where they say that it can be fixed flashing dbdata.rfs. I've tried some stock rom (XXKPE/XXKQ/XXKB1/XXKB3/XXJL9) and none of them has this file. someone can help me? Or saying in which stock rom I can find it or taking it from your smartphone and put in fileserver/hotfile or megaupload. Thank you.
Which steps did you follow? Try doing everything: do a re-partition first (PIT, probably you need to remove the battery to shut the phone down and put it again in download mode) and then flash the other three files (PDA,PHONE,CSC).
I do like always using heimdall and the same procedure that works everytime. Go in download mode, flash the files about XXKPE and everygo without any problem. Ok go in recovery mode to make the changes and do the wipe but I've found that problems that i've spoke before.
Ok I flashed XXKPE and XXKPQ ignoring the error and I've installed Skin1980's CWM . Now when I do wipe data he say : "Error mounting /datadata !" and skip his format. The cellphone go in loop at the boot like before.
Did you check re-partition? I've never tried heimdall, but I think this problem should be solved with a proper flash (with a re-partition).
I don't know any other way to solve this problem.
==
edit:
By the way I don't think skin1980's CWM is compatible with KPQ. Try this
I assumed you saw this thread in the i9000 forum? forum.xda-developers.com/showthread.php?t=751827
Try to flash a stock ROM again to see if this happens.
Yes I've checked the repartition. Thank you anyway
Well, I've installed amit.bagaria's CWM and using it seems that i can perform wipe operation but he spoke about /datadata/ formating and didn't spoke about dbdata. Everything goes well so i thought to install vurrutRom (it's for XXKPQ) and the installation procedure goes well not even a problem. Perfect!!! No it seems to go in loop again (I've waited about 10 minutes). Mhhh ok he format everything and go to loop.. try to install XXKPE. I do it and it show up the first message
"can't access to '/system/csc/SER/system/'"
etc...
Ok using amit.bagaria's CWM taking root permission etc it seems to format /datadata but he can't mount it and even /sdcard...have anyone some suggestions ?
@!n0x : in that link they speak about mount a file .rfs that you've in your PC on your PC and not how to mount in your phone. Thank you anyway
Have you tried manually mounting it via CWM? Try the CWM from the Universal CF-Root by ganesh (if I'm not wrong)
[SOLVED] I've installed XXKB3 and every goes well . Thank you for help/suggestion etc.
Cereal, where did you find this rom?
I'm facing the very same soft-brick problem on the I9003. I've downloaded more than 5 different roms, but none of them have the dbdata.rfs...
Thanks in advance!
- Fabrício
fabricioferreira said:
Cereal, where did you find this rom?
I'm facing the very same soft-brick problem on the I9003. I've downloaded more than 5 different roms, but none of them have the dbdata.rfs...
Thanks in advance!
- Fabrício
Click to expand...
Click to collapse
here is if you didn't found it and if you still need it.
Cereal_84 said:
@!n0x : in that link they speak about mount a file .rfs that you've in your PC on your PC and not how to mount in your phone. Thank you anyway
Click to expand...
Click to collapse
Search for latona_20110114.pit, download and flash I9003XXKB3
Related
My phone is bricked...please help to restore
E:failed to mount /data (No such file or directory)
I was reflashing XXKPE(with pit) after flashing on reboot, it stuck. On power reboot, it shown the below log
----Copying media files------
E:failed to mount /sdcard (File exists)
E:copy_cache_media:Can't mount /sdcard
your storage not prepared yet, please use UI menu for format and reboot actions.
Media files copy failed.
something about successful multi-csc
E:can't mount /data
Options available in recovery mode:
reboot
factory reset
wipe cache partition
For i9000 I found this, but it is not applicable for our device, i suppose.
Thanks in advance...
ezeeyahoo said:
My phone is bricked...please help to restore
E:failed to mount /data (No such file or directory)
----Copying media files------
E:failed to mount /sdcard (File exists)
E:copy_cache_media:Can't mount /sdcard
your storage not prepared yet, please use UI menu for format and reboot actions.
Media files copy failed.
something about successful multi-csc
E:can't mount /data
Options available in recovery mode:
reboot
factory reset
wipe cache partition
For i9000 I found this, but it is not applicable for our device, i suppose.
Thanks in advance...
Click to expand...
Click to collapse
what have you done to land up in this flight?
we cannot help if you provide no background. perhaps you can drop by samsung care centre to repair it if you cannot provide details.
Please post every detail so that you will be easier to help (Firmware, CF-ROOT version, all mods/roms/customization) and exactly why you are restoring. What happened?
Also, all else fails, go into download mode and flash a firmware with .pit and start from scratch (i suggest XXKPE). This should make your phone bootable again.
Your phone is never dead unless you cannot go into download mode anymore. And even then, there are ways around it
Please post in the appropriate section, this belongs in General.
I thought, this is not general issue. Updated first post
Try this:
1. Re-Download XXKPE and make sure the download is good. A bad FW is un-flashable.
2. flash the .pit file, take out battery, go into download mode and flash the pit file again (do 3X). This is to make sure partitions are good.
3. Then flash everything else for XXKPE (4 files), don't select the pit file at this step.
Tell us if it boots.
If you cant go into download mode, read this thread.
maybe you just could try to apply the rom that you was using before flashing KPE, that helps me sometimes when i has bootloops and that stuff.
hope it helps
I am sorry, but that didn't work. I have this phone only, no other option
http://forum.xda-developers.com/archive/index.php/t-788850.html
is there any odin which can help as it did for user on this thread
I dont know if anyone has made a custom .PIT file for our device like the thread you posted. I dont think we have that for our device yet.
Try this:
1. Flash .PIT then KPE (ignore error after reboot)
2. Flash KPQ (ignore any errors)
3. Flash uc kernel (ignore any errors)
4. Try to go into CWM and format all partitions (mounts and storage)
5. Factory reset
6. Flash .PIT and KPE again (see if error is gone)
Also this:
1. Flash .PIT then KPE (ignore error after reboot)
2. Try to go to Recovery
3. Factory Reset
4. Flash .PIT then KPE (see if error is gone)
post result of all steps
If still no fix, flash .pit (dont do anything else) then go to samsung service center. Just act stupid, dont say you were flashing anything. Just say you were using normally then the phone stopped working
inciongd said:
I dont know if anyone has made a custom .PIT file for our device like the thread you posted. I dont think we have that for our device yet.
Try this:
1. Flash .PIT then KPE (ignore error after reboot)
2. Flash KPQ (ignore any errors)
3. Flash uc kernel (ignore any errors) # I tried this way, in CWN rec. mode, it stuck at "formatting /data...".
4. Try to go into CWM and format all partitions (mounts and storage) ]
5. Factory reset
6. Flash .PIT and KPE again (see if error is gone)
Also this:
1. Flash .PIT then KPE (ignore error after reboot)
2. Try to go to Recovery # I have already tried this. Didn't worked
3. Factory Reset
4. Flash .PIT then KPE (see if error is gone)
post result of all steps
If still no fix, flash .pit (dont do anything else) then go to samsung service center. Just act stupid, dont say you were flashing anything. Just say you were using normally then the phone stopped working
Click to expand...
Click to collapse
Please find the comments in the quote.
just a guess, but try flashing cwm just after pit to enable recovery in the second set of steps. once again, just a guess, never tried it myself...
my reasoning is that after flashing pit, nothing works except download mode since the partitions have been reset and some (or all) data has been wiped as part of the process, hence the reason it doesn't even reset after odin reboots the phone and just goes to a black, backlit screen
inciongd said:
If still no fix, flash .pit (dont do anything else) then go to samsung service center. Just act stupid, dont say you were flashing anything. Just say you were using normally then the phone stopped working
Click to expand...
Click to collapse
Can I say that, after full charge in off mode, phone didn't turned on...
supergaijin said:
just a guess, but try flashing cwm just after pit to enable recovery in the second set of steps. once again, just a guess, never tried it myself...
my reasoning is that after flashing pit, nothing works except download mode since the partitions have been reset and some (or all) data has been wiped as part of the process, hence the reason it doesn't even reset after odin reboots the phone and just goes to a black, backlit screen
Click to expand...
Click to collapse
Still same, freeze at "formatting /data..."
i agree with supergaijin.
Try:
1. Falsh .PIT
2. Flash CWM
3. Try to go to CWM
4. Format all partitions
5. Then try KPE
Another:
Find the original Froyo ROM of your phone and flash it. (should have .pit as well)
Also, try to be more descriptive of what step you are in. Tell us how you try it.. then describe what happens at the state of the error. Its hard to imagine what is happening with your phone with 1 sentence descriptions.
ezeeyahoo said:
Can I say that, after full charge in off mode, phone didn't turned on...
Click to expand...
Click to collapse
Yes you can.
friend i already have the same problem, no fw solve this issue, i think it is hardware related prob...better go to service center... before ensure that ur current fw is same as original fw.. and say after switched on my phone not responding it restarting again and again...ok.....they will help u...
when i have the issue i tried lots of fw to flash every time it shows the same problem "E can't mound"...lots of probs.....then i given to service center and said to tech..after updation completes my phone not working good...they said, it is software issue it doesn,t cover warrenty.. i said ok after some time tech call me and told me it is not working they going to order new board for my phone waite for 7 days under warrenty now i am happy.......just do it
How can I go back to DDKB2 Froyo from GB?
ezeeyahoo said:
How can I go back to DDKB2 Froyo from GB?
Click to expand...
Click to collapse
Flash XXKB3 with pit...flash XXKB3 again with pit...followed by flashing DDKB2 twice...remeber between each flash perform factory reset
I have got my phone from service center but http://forum.xda-developers.com/showthread.php?t=1473418
Hi!!! I m having bootloop problem been trying to flash through odin but not successful getting all kinds of errors or unable to mount, in the 3e recovery. I have manage to install CWM recovery so now I wanna try to use CWM to update or install zip through sdcard, the problem is I m unable to locate stock 2.2 in zip format.
Would appreciate if anyone can give me a link.... Thanks
Been trying for 2 days to get this damn phone to function, probably have to sit in the drawer with my hard bricked SGS. After this I hope my Skyrocket won't join them
ndmuni said:
Hi!!! I m having bootloop problem been trying to flash through odin but not successful getting all kinds of errors or unable to mount, in the 3e recovery. I have manage to install CWM recovery so now I wanna try to use CWM to update or install zip through sdcard, the problem is I m unable to locate stock 2.2 in zip format.
Would appreciate if anyone can give me a link.... Thanks
Been trying for 2 days to get this damn phone to function, probably have to sit in the drawer with my hard bricked SGS. After this I hope my Skyrocket won't join them
Click to expand...
Click to collapse
You cannot flash stock firmware through odin.Neither Froyo nor Gingerbread.
Sent from my GT-I9003 using XDA
If you have correct single file rom like .tar file for this phone go to download mode and flash the from with odin in PDA only.
I have been using odin to flash DXKF1, XXKPE and i can't remember whatelse over the last 36hrs. The trouble is, after odin passes the phone does not load, it shows a whole lot of red line errors and it boots into bootloop. I think its a problem with the internal memory chip cos CWM can install Posiedon rom but i get the same bootup problem.
ndmuni said:
I have been using odin to flash DXKF1, XXKPE and i can't remember whatelse over the last 36hrs. The trouble is, after odin passes the phone does not load, it shows a whole lot of red line errors and it boots into bootloop. I think its a problem with the internal memory chip cos CWM can install Posiedon rom but i get the same bootup problem.
Click to expand...
Click to collapse
You need to post the whole lot of red lines.No one can debug it without knowing the error.if it happens too fast just click a pic with a camera
Sent from my GT-I9003 using XDA
devilhell007 said:
You need to post the whole lot of red lines.No one can debug it without knowing the error.if it happens too fast just click a pic with a camera
Sent from my GT-I9003 using XDA
Click to expand...
Click to collapse
Here's what happen when i use odin to flash DXKF1, after PASS when the phone reboots:
Movi_check start..!!
movinand read fail
movinand checksum confirmation fail
Ifs pass open fail
--movi_checking undone...
update media please wait
E: Can't mount/dev/block/mmcblk0pl
(no such file or directory)
E:copy_dbdata_media_can't mount SDCARD
Your storage not prepared yet Please use UI menu
for format and reboot action
Copy default media content failed..
If i use CWM to install zip, it will start installing and upon reboot i get the "can't
mount system sdcard and data" and phone boots into CWM recovery
I have flashed my GT-i9003 back to Ginger bread from Jelly bean. and after flashing it successfully i get into a boot loop, and after that i get into the recovery mode and try to wipe data/factory reset my phone i get this error. i dont know what to do next. ive instaling the cfroot kernel and tried restoring my backups but im still stuck at boot loop and i cant do the wipe data or factory rest and still it shows the error.
need some help and its very urgent...
rfs format failed on /dev/block/stl10
fixed
renycyril said:
I have flashed my GT-i9003 back to Ginger bread from Jelly bean. and after flashing it successfully i get into a boot loop, and after that i get into the recovery mode and try to wipe data/factory reset my phone i get this error. i dont know what to do next. ive instaling the cfroot kernel and tried restoring my backups but im still stuck at boot loop and i cant do the wipe data or factory rest and still it shows the error.
need some help and its very urgent...
rfs format failed on /dev/block/stl10
Click to expand...
Click to collapse
Fixed it, thanks to shriomman who had advised me on what to do.
downloaded XXKPE rom from sammobile.com and flased it. then i flashed DDLF2 and that seemed to work for me.. now i successfully flashed back to GB from JB
it worked !!!
renycyril said:
Fixed it, thanks to shriomman who had advised me on what to do.
downloaded XXKPE rom from sammobile.com and flased it. then i flashed DDLF2 and that seemed to work for me.. now i successfully flashed back to GB from JB
Click to expand...
Click to collapse
Thanks a lot, it worked for me as well
Same problem here!!
GUYS I have the same problem here
what did you do exactly to solve it?
Sweet !!!!!!!!!!
renycyril said:
Fixed it, thanks to shriomman who had advised me on what to do.
downloaded XXKPE rom from sammobile.com and flased it. then i flashed DDLF2 and that seemed to work for me.. now i successfully flashed back to GB from JB
Click to expand...
Click to collapse
Had the exact same problem... Worked perfectly, and I had no faith in it working. Very useful to read this post.
I'm going to summarize my experience:
1. Repartition with PIT file (take out battery, put it back in, and again to downloading mode with combination buttons)
2. Flash XXKPE
3. Then flash the gingerbread firmware you desire. DONE !!!!
rfs format failed on /dev/block/stl10
gidiem said:
Had the exact same problem... Worked perfectly, and I had no faith in it working. Very useful to read this post.
I'm going to summarize my experience:
1. Repartition with PIT file (take out battery, put it back in, and again to downloading mode with combination buttons)
2. Flash XXKPE
3. Then flash the gingerbread firmware you desire. DONE !!!!
Click to expand...
Click to collapse
i got the same situation i flashed cyanogenmod 9 and after that returnrd to stock rom with ddlf2 but my phone undergoes bootloop and not starting somebody please help me with links....
rfs format failed on /dev/block/stl10
Hi Guys,
I tried to flash my Stock Firmware (JPJV6 ) recovery 3e , Gingerbread 2.3.3 in GT-i9000 using odin 3 v 3.07 . I downloaded 'one file' firmware for my device from samsung-updates website.
Then i flashed the 'one file' keeping it in PDA with NO PIT & Repartition-Unchecked...Successfully it flashed and rebooted .
Now it stopped in recovery mode with this E:failed to mount /dbdata....& E: rfs format failed on /dev/block/stl10
So when i reboot the device it everytime goes to Samsumg S Logo and reboots again (BOOTLOOP).
Please provide me solution to get back my stock firmware.
Thanks,
Mohammed Shahid
shahid_s said:
Hi Guys,
I tried to flash my Stock Firmware (JPJV6 ) recovery 3e , Gingerbread 2.3.3 in GT-i9000 using odin 3 v 3.07 . I downloaded 'one file' firmware for my device from samsung-updates website.
Then i flashed the 'one file' keeping it in PDA with NO PIT & Repartition-Unchecked...Successfully it flashed and rebooted .
Now it stopped in recovery mode with this E:failed to mount /dbdata....& E: rfs format failed on /dev/block/stl10
So when i reboot the device it everytime goes to Samsumg S Logo and reboots again (BOOTLOOP).
Please provide me solution to get back my stock firmware.
Thanks,
Mohammed Shahid
Click to expand...
Click to collapse
some please help. same problem
Follow these steps: (for Samsung Galaxy S1 i9000)
Download 3 file firmware I9000XXJVU_I9000OXAJVU_OXA.zip
Extract the firmware
Download Odin 1.83
Open Odin
Put your device into Download MODE (Home + Volume Down + Power)
Download Galaxy S PIT File s1_odin_20100512.pit
Click PIT and select s1_odin_20100512.pit
Click PDA and select CODE_I9000XXJVU_CL851880_REV03_user_low_ship.tar.m d5
Click PHONE and select MODEM_I9000XXJVU_REV_00_CL1092175.tar.md5
Click CSC and select GT-I9000-CSC-MULTI-OXAJVU.tar.md5
Then finally click START!
(Re-partition should be thicked)
Everything can be found on google for free
via SamMobile
(For the ones who will ask, yes i have read a lot of threads with this problem and tryed almos all of them, and i even read about other phones with this problem so the point is fix this.)
Hi,
I write cuz i got this problem in mi sisters galaxy i9003 SL.
Shi is a basic user, just use the phone for calls and whatsapp. It had Pou and go Locker installed and nothing else.
The phone got slow so we decided to do "factory reset", but it doesnt formated and keep the user information even programs, so decided to flash the phone so it would be forced to wipe the data, i'vr got the same phone and flashed it a lot of times.
Flashed with odin 1.85 the PIT (latona) and no problem
Then XXKPE 4 Files, and it seems no problem, but it didnt restart so got into bootloop.
So re flashed XXKPE.
Here is when the problem starts, the phone got into a strange mode, at last i never saw it before, i ve got the android robot saying something about kernel with a loading bar, i let the phone work til it got discarged, but when i turned it on again i ve got the problem(E:format_volume: rfs format failed). Then the phone stopped charging. i manage to enter recovery mode but for my surprise it was the normal recovery from samsung and i flashed clockworkmod and even tested it. So i re flashed clockworkmod and it works, but if i flash anything it comes back to samsung recovery mode. i still can get to download mode.
I have tryed the following:
Re flash room stock entel chile ------> problem
Re flash XXKPE 4 archivos---------> problem
Re Flash clockworkmod-------> works but if i flash anithing it comes to samsung recovery again.
Re flash Kernel-------> problem
I have read about the dead memory of the phone an take it back with a SD card, i dont want to sorry. Here the SD card costs more than the phone.
So i want to try tosolve this. not a very advanced user, but i can learn quickly.
I'm open to ideas.
Thanks.
yvel21 said:
(For the ones who will ask, yes i have read a lot of threads with this problem and tryed almos all of them, and i even read about other phones with this problem so the point is fix this.)
Hi,
I write cuz i got this problem in mi sisters galaxy i9003 SL.
Shi is a basic user, just use the phone for calls and whatsapp. It had Pou and go Locker installed and nothing else.
The phone got slow so we decided to do "factory reset", but it doesnt formated and keep the user information even programs, so decided to flash the phone so it would be forced to wipe the data, i'vr got the same phone and flashed it a lot of times.
Flashed with odin 1.85 the PIT (latona) and no problem
Then XXKPE 4 Files, and it seems no problem, but it didnt restart so got into bootloop.
So re flashed XXKPE.
Here is when the problem starts, the phone got into a strange mode, at last i never saw it before, i ve got the android robot saying something about kernel with a loading bar, i let the phone work til it got discarged, but when i turned it on again i ve got the problem(E:format_volume: rfs format failed). Then the phone stopped charging. i manage to enter recovery mode but for my surprise it was the normal recovery from samsung and i flashed clockworkmod and even tested it. So i re flashed clockworkmod and it works, but if i flash anything it comes back to samsung recovery mode. i still can get to download mode.
I have tryed the following:
Re flash room stock entel chile ------> problem
Re flash XXKPE 4 archivos---------> problem
Re Flash clockworkmod-------> works but if i flash anithing it comes to samsung recovery again.
Re flash Kernel-------> problem
I have read about the dead memory of the phone an take it back with a SD card, i dont want to sorry. Here the SD card costs more than the phone.
So i want to try tosolve this. not a very advanced user, but i can learn quickly.
I'm open to ideas.
Thanks.
Click to expand...
Click to collapse
so what you are saying is every time you try to flash something... even your stock firmware via odin the phone just resets to its orignal state (i.e E:format_volume: rfs format failed).what I see from here is your device system data has been completely formatted but failed to flash any firmware.... try with memory card and sim card removed and flash KPE(all files)... there isn't any need to flash any kernel on stock so just avoid it...
follow these steps
*Get samsung USB drivers and install on the pc/laptop.
*Download ODIN and the KPE files.(for I9003 only)
*Connect your phone in Download mode.
*ODIN will detect the device and flash the stock.
*If your flash was successfull you will get your phone back in running condition.
GOODLUCK
mustafahussain said:
so what you are saying is every time you try to flash something... even your stock firmware via odin the phone just resets to its orignal state (i.e E:format_volume: rfs format failed).what I see from here is your device system data has been completely formatted but failed to flash any firmware.... try with memory card and sim card removed and flash KPE(all files)... there isn't any need to flash any kernel on stock so just avoid it...
follow these steps
*Get samsung USB drivers and install on the pc/laptop.
*Download ODIN and the KPE files.(for I9003 only)
*Connect your phone in Download mode.
*ODIN will detect the device and flash the stock.
*If your flash was successfull you will get your phone back in running condition.
GOODLUCK
Click to expand...
Click to collapse
Same thing happend to my SL and now its dead so good luck
Thanks,
Still trying to make it work, after a few tryes to flash xxKPE it stopped charging but some how re flashing xxkpe got it to work back again, but doesnt start the OS, still in bootloop.
yvel21 said:
Thanks,
Still trying to make it work, after a few tryes to flash xxKPE it stopped charging but some how re flashing xxkpe got it to work back again, but doesnt start the OS, still in bootloop.
Click to expand...
Click to collapse
The internal SD might be broken like mine.
Try boot into recovery, then adb shell, execute and paste output in this thread again:
Code:
ls -l /dev/block/mmcblk*
fdisk -l /dev/block/mmcblk0
fdisk -l /dev/block/mmcblk1
There are several ways it can get broken, and i know a few ways to customize firmwares to workaround them.
i faced this problem in I9000 & I9003 and solution is .....
get memory card and format it on yr pc
make file system is fat32
when done put sd card into phone
flash the phone with pit file
make sure to mark repartion
and when done
yr phone work just fine
P>>S
never get out this sd card from phone
or it will go to loop mode again
try and post result here
B.R
Can't mount datadata
Today afternoon i tried to flash CM9/10(before that my I9003 had Android 2.3.6 XXLE4)... i wasnt successfully... so I wanted to use my CWM Backup... first I flashed the Clockworkmod Recovery about Stock ROM + CF-ROOT and then I used the backup
And there was the problem... at the end of the restoring progress, I read 'Can´t mount datadata'.... the mobile couldnt reboot... it stayed on the Startupscreen. i couldnt find any helpful threads about searching in the web... Do anyone know what there happened and how I can solve this problem?
My English isnt so good... I hope you can understand what i wrote....
EDIT: I can get into the Recovery and Download Mode
Snivy13 said:
Today afternoon i tried to flash CM9/10(before that my I9003 had Android 2.3.6 XXLE4)... i wasnt successfully... so I wanted to use my CWM Backup... first I flashed the Clockworkmod Recovery about Stock ROM + CF-ROOT and then I used the backup
And there was the problem... at the end of the restoring progress, I read 'Can´t mount datadata'.... the mobile couldnt reboot... it stayed on the Startupscreen. i couldnt find any helpful threads about searching in the web... Do anyone know what there happened and how I can solve this problem?
My English isnt so good... I hope you can understand what i wrote....
EDIT: I can get into the Recovery and Download Mode
Click to expand...
Click to collapse
EDIT: I can get into the Recovery and Download Mode: Solution Hard reset button
Re-flash and restore your backup
TTMaster said:
EDIT: I can get into the Recovery and Download Mode: Solution Hard reset button
Re-flash and restore your backup
Click to expand...
Click to collapse
Maybe I wrote it wrong again... I CAN get into Download Mode and Recovery Mode... I also tried to flash a Stock-ROM and then restore the backup... but the phone cant start after I flashed the Stock-ROM or after restoring the backup...
Maybe my way is wrong...
I do it like that:
1.Start Odin
2.Open PDA and choose the XXLE4 Stock ROM
3.Start
4.After this was done I try to restart...
I think there must be a wrong step...
Snivy13 said:
Maybe I wrote it wrong again... I CAN get into Download Mode and Recovery Mode... I also tried to flash a Stock-ROM and then restore the backup... but the phone cant start after I flashed the Stock-ROM or after restoring the backup...
Maybe my way is wrong...
I do it like that:
1.Start Odin
2.Open PDA and choose the XXLE4 Stock ROM
3.Start
4.After this was done I try to restart...
I think there must be a wrong step...
Click to expand...
Click to collapse
1.- Start Odin 1.85
2.- PIT Latona_20110114.pit (select Repartition + Auto Reboot + F. Reset Time)
3.- Remove battery + Download mode
4.- Odin - PDA XXLE4 Stock ROM
Good Luck
Error mounting /datadata
TTMaster said:
1.- Start Odin 1.85
2.- PIT Latona_20110114.pit (select Repartition + Auto Reboot + F. Reset Time)
3.- Remove battery + Download mode
4.- Odin - PDA XXLE4 Stock ROM
Good Luck
Click to expand...
Click to collapse
I tried it... I flashed Latona pit with those settings, and then, after I removed Battery one time, I flashed the Stock ROM, but there was a boot loop again.
After there was a boot loop, I also tried to flash CWM and then restore the backup, but at the end I saw again:
Restoring datadata...
Error mounting /datadata!
Skipping format...
Can't mount /datadata!
Snivy13 said:
I tried it... I flashed Latona pit with those settings, and then, after I removed Battery one time, I flashed the Stock ROM, but there was a boot loop again.
After there was a boot loop, I also tried to flash CWM and then restore the backup, but at the end I saw again:
Restoring datadata...
Error mounting /datadata!
Skipping format...
Can't mount /datadata!
Click to expand...
Click to collapse
Yesterday in the evening I successfully flashed a Stock ROM with 4 parts(Bootloader, PDA, Phone, CSC), then I flahsed a 1 part XXLE4 and the CF-ROOT and restored the backup over CWM Now my phone works normally
Thank you for all those who helped me there