Hi,
I was flashing XXKPE and everything goes well. I goes in recovery mode and find the following message :
_ can't access to '/system/csc/SER/system/'
I don't see it at the first so I tried to wipe data/factory reset and it show these messages :
_ Formating /dbdata
_ E:format_volume: rfs format failed on /dev/block/stl10/
With this error the smartphone go in "boot loop". I've search about these messages in google and i've found a topic for I9000 where they say that it can be fixed flashing dbdata.rfs. I've tried some stock rom (XXKPE/XXKQ/XXKB1/XXKB3/XXJL9) and none of them has this file. someone can help me? Or saying in which stock rom I can find it or taking it from your smartphone and put in fileserver/hotfile or megaupload. Thank you.
Which steps did you follow? Try doing everything: do a re-partition first (PIT, probably you need to remove the battery to shut the phone down and put it again in download mode) and then flash the other three files (PDA,PHONE,CSC).
I do like always using heimdall and the same procedure that works everytime. Go in download mode, flash the files about XXKPE and everygo without any problem. Ok go in recovery mode to make the changes and do the wipe but I've found that problems that i've spoke before.
Ok I flashed XXKPE and XXKPQ ignoring the error and I've installed Skin1980's CWM . Now when I do wipe data he say : "Error mounting /datadata !" and skip his format. The cellphone go in loop at the boot like before.
Did you check re-partition? I've never tried heimdall, but I think this problem should be solved with a proper flash (with a re-partition).
I don't know any other way to solve this problem.
==
edit:
By the way I don't think skin1980's CWM is compatible with KPQ. Try this
I assumed you saw this thread in the i9000 forum? forum.xda-developers.com/showthread.php?t=751827
Try to flash a stock ROM again to see if this happens.
Yes I've checked the repartition. Thank you anyway
Well, I've installed amit.bagaria's CWM and using it seems that i can perform wipe operation but he spoke about /datadata/ formating and didn't spoke about dbdata. Everything goes well so i thought to install vurrutRom (it's for XXKPQ) and the installation procedure goes well not even a problem. Perfect!!! No it seems to go in loop again (I've waited about 10 minutes). Mhhh ok he format everything and go to loop.. try to install XXKPE. I do it and it show up the first message
"can't access to '/system/csc/SER/system/'"
etc...
Ok using amit.bagaria's CWM taking root permission etc it seems to format /datadata but he can't mount it and even /sdcard...have anyone some suggestions ?
@!n0x : in that link they speak about mount a file .rfs that you've in your PC on your PC and not how to mount in your phone. Thank you anyway
Have you tried manually mounting it via CWM? Try the CWM from the Universal CF-Root by ganesh (if I'm not wrong)
[SOLVED] I've installed XXKB3 and every goes well . Thank you for help/suggestion etc.
Cereal, where did you find this rom?
I'm facing the very same soft-brick problem on the I9003. I've downloaded more than 5 different roms, but none of them have the dbdata.rfs...
Thanks in advance!
- Fabrício
fabricioferreira said:
Cereal, where did you find this rom?
I'm facing the very same soft-brick problem on the I9003. I've downloaded more than 5 different roms, but none of them have the dbdata.rfs...
Thanks in advance!
- Fabrício
Click to expand...
Click to collapse
here is if you didn't found it and if you still need it.
Cereal_84 said:
@!n0x : in that link they speak about mount a file .rfs that you've in your PC on your PC and not how to mount in your phone. Thank you anyway
Click to expand...
Click to collapse
Search for latona_20110114.pit, download and flash I9003XXKB3
Hi,
My SGT 7.7 seems brick after I took it out of my bag. It gets stuck and stays on the boot screen where says "Samsung Galaxy Tab 7.7" for a few seconds, and then just keep rebooting.
It is able to go into the Download Mode when I press "Power+Vol-", but no response when I press "Power+Vol+". I tried to flash all kinds of firmware with Odin, but nothing work.
I also tried to flash it with .pit, PDA, PHONE and CSC. I got this screen and then stopped and Odin says "Now Writing, Please wait about 2 minutes."
I appreciate your help!
same problem here, but caused from rom-manager! did nothing more than using the "reboot into recovery" option, i did NOT flash anything with rom-manager before!
download mode works, recovery works, but i can flash what i want, after turning the device on the "samsung 7.7" stays for about 30sec, then it reboots ad infinitum!
any ideas?
i'm within the one week were i can exchange the device without any problems, but i want to fix it myself if possible!
thx in advance!
TML1504 said:
same problem here, but caused from rom-manager! did nothing more than using the "reboot into recovery" option, i did NOT flash anything with rom-manager before!
download mode works, recovery works, but i can flash what i want, after turning the device on the "samsung 7.7" stays for about 30sec, then it reboots ad infinitum!
any ideas?
i'm within the one week were i can exchange the device without any problems, but i want to fix it myself if possible!
thx in advance!
Click to expand...
Click to collapse
I have seen similar symptoms on mine. it turned out to be corrupt /data filesystem. I had to use the sammy 3e recovery wipe data/factory reset option. And then reflash with odin.
(CWM could not fix this filesystem problem.)
(areyou sure rom manager is compatible with the different partitions on the 7.7)
Remember you will loose all user data !!!!!
davp said:
I have seen similar symptoms on mine. it turned out to be corrupt /data filesystem. I had to use the sammy 3e recovery wipe data/factory reset option. And then reflash with odin.
(CWM could not fix this filesystem problem.)
(areyou sure rom manager is compatible with the different partitions on the 7.7)
Remember you will loose all user data !!!!!
Click to expand...
Click to collapse
again thx,
but the problem is seems to be "deeper" than only a corrupt /data!
The tab doesnt boot further then "samsung 7.7", if data is corrupt then
at least android will load (bootanimation) and go into a bootloop in some stage!
Also, I didn't change or install or flash anything in rom-manager, I "only" used the reboot function!
After reflashing the device with repartition and HongKong.pit I think I messed up the partitions totally, so I would really need the PIT for 6810 (6800 has different partition layout) to repair this!
But as it seems no one has this PIT or is willing to provide it,
so I ordered an new tab which will arrive in the next hours, and return this one within the next days!
Where did you find the PIT file ? You may just destoried the partition. God bless you!
matth3w said:
Hi,
My SGT 7.7 seems brick after I took it out of my bag. It gets stuck and stays on the boot screen where says "Samsung Galaxy Tab 7.7" for a few seconds, and then just keep rebooting.
It is able to go into the Download Mode when I press "Power+Vol-", but no response when I press "Power+Vol+". I tried to flash all kinds of firmware with Odin, but nothing work.
Click to expand...
Click to collapse
I have a familiar problem....
I have not flashed or rooted my device - it is exactly how it came out of the box...
One morning while using it it froze - I did are reset by holding the power button down and then let it reboot but when it did it can not get past the "Samsung Galaxy Tab 7.7" screen.
Can get it into download mode, but if I go to recovery mode then all I get it a headline saying "Manual Mode" which grabs some manual .apk files and then just goes back into the boot mode with the "Samsung Galaxy Tab 7.7" screen.
Any ideas?
Had a Galaxy Tab Original and got the Galaxy SII and have mod them to death - just though for this one I would leave it original and enjoy the OTA updates as the were delievered - especially considering ICS in a matter of days
If you can boot into download mode you can call this a soft brick..
dont use ROM manager and install clockworkmod from that, incompatibility of cwm recovery will brick your phone..
Use odin only on PDA slots, you dont need repartition or pit files..it seems you got a corrupt recovery..
suwandiapr said:
Use odin only on PDA slots, you dont need repartition or pit files..it seems you got a corrupt recovery..
Click to expand...
Click to collapse
Suwandiapr - Thank you for this. When you say "Use odin only on PDA slots" you are suggesting that I will have to download and install a stock ROM aren't you?
Cheers (and again thank you)....
Aspi914 said:
Suwandiapr - Thank you for this. When you say "Use odin only on PDA slots" you are suggesting that I will have to download and install a stock ROM aren't you?
Cheers (and again thank you)....
Click to expand...
Click to collapse
yes, that is what he means.
Also, if you still have trouble after the first flash, you may need to go into samsung 3e recovery and do a data wipe/factory reset. Then flash again. Since these are non-wipe firmwares, simple flashing may not clear a corrupt filesystem.
Obviously you will lose all user data!
suwandiapr said:
If you can boot into download mode you can call this a soft brick..
dont use ROM manager and install clockworkmod from that, incompatibility of cwm recovery will brick your phone..
Use odin only on PDA slots, you dont need repartition or pit files..it seems you got a corrupt recovery..
Click to expand...
Click to collapse
thx, but as i said i DID NOT FLASH OR INSTALL ANYTHING with rom-manager, i only used the option "reboot into recovery"!
and i used odin to try to unbrick my device (i flashed a dozen roms as well as the sbl etc.), without any success. also, till now nobody has provided a 16GB PIT for 6810, therefore i returned the tab and grabbed a new one!
davp said:
Also, if you still have trouble after the first flash, you may need to go into samsung 3e recovery and do a data wipe/factory reset. Then flash again. Since these are non-wipe firmwares, simple flashing may not clear a corrupt filesystem!
Click to expand...
Click to collapse
Thank you Davp...
Ok...got the P6800ZSLA2 stock ROM and have managed to get it back...while I don't want to have to re-do all the data, I think I will take your advise and do a data wipe/reset.
Aspi914 said:
Suwandiapr - Thank you for this. When you say "Use odin only on PDA slots" you are suggesting that I will have to download and install a stock ROM aren't you?
Cheers (and again thank you)....
Click to expand...
Click to collapse
Yes you right, thats what i mean..
TML1504 said:
thx, but as i said i DID NOT FLASH OR INSTALL ANYTHING with rom-manager, i only used the option "reboot into recovery"!
and i used odin to try to unbrick my device (i flashed a dozen roms as well as the sbl etc.), without any success. also, till now nobody has provided a 16GB PIT for 6810, therefore i returned the tab and grabbed a new one!
Click to expand...
Click to collapse
Im sorry , my answer cannot solve your problem.. You say your device "stuck on Samsung logo" right? your recovery and download mode seem ok, from my experience its because /data corrupt or something crash on your filesystem..
If you can go to recovery menu, do factory reset,..
I cannot help you with pit.file coz i actually dont have the device right now..
Aspi914 said:
Thank you Davp...
Ok...got the P6800ZSLA2 stock ROM and have managed to get it back...while I don't want to have to re-do all the data, I think I will take your advise and do a data wipe/reset.
Click to expand...
Click to collapse
Good luck..
davp said:
I have seen similar symptoms on mine. it turned out to be corrupt /data filesystem. I had to use the sammy 3e recovery wipe data/factory reset option. And then reflash with odin.
Click to expand...
Click to collapse
I've experienced a similar problem with corrupt /data and couldn't overcome it.
How did you use Samsung recovery when you had CWM recovery flashed?
白い熊 said:
I've experienced a similar problem with corrupt /data and couldn't overcome it.
How did you use Samsung recovery when you had CWM recovery flashed?
Click to expand...
Click to collapse
You either get it from a full flash of stock firmware, or make your own tar with just recovery.img in it (extracted from stock). And flash with odin in the pda.
It is handy to be able to switch recoveries. CWM doesn't seem to match the 3e data wipe/factory reset.
The problem was:
I was playing a game, in the middle of it the Tab reset, I've never had it reset. Then it rebooted to the Samsung Tab 7.7 logo.
I thought, I'm lucky, made a CWM backup. So tried to restore the CWM backup. When the restore got to /data the tab rebooted again, i.e. something was messed with it.
So got stock firmware, flashed it from PC odin, flashed with success. But rebooted to the logo again.
Tried to get into the stock recovery, but it would only show "Updating..." something, I don't remember anymore, but the stock recovery wouldn't boot. Flashed it a couple of times, same result. Had to take the Tab back to the store...
Am kinda afraid to mess with it now, since I don't want it to happen.
So am wondering what to do if the same happens, or just forget CWM and flash stock recovery.img just to be safe?
I had similar issues after hard power-off [long hold power button]. Confirmed with adb into insecure cwm recovery that /data was corrupt. It explained why my restores stopped at /data.
Cwm data wipe, or format data did not help.
I flashed the stock 3e recovery.img in a tar with odin.
3e data wipe/factory reset. Reflash whole stock firmware with odin.
Check system boots ok.
Reflash cwm, then do restore ok.
I have seen stock 3e recovery fail to start properly. It seemed to be related to files/directories on the external sd card. It came up and said something like 'manual mode', 'updating'.
I tried clearing cache and hidden.
I know I deleted at least tmp_sec_fota directory off the external sd card, maybe someting to do with fota is upsetting our tabs from time to time.
Yep, exactly, that's it, it was "Manual mode" and "Updating", same symptoms, I couldn't get past it.
So what you're saying, I had a MicroSD in it, and that's why it was stuck at this? Not sure if I had an SD in it, but I flashed stock like three times, and then still couldn't enter 3e recovery, all the time had this "manual mode" come up...
Thanks for the guide of what you did.
Am downloading the latest Thai firmware now, to extract the stock recovery, so that I'm ready just in case.
Do you just tar the recovery.img and use that for flashing if necessary? No special permissions, nothing?
Sorry, not as clear cut as that... I did three things, cleared cache, cleared hidden, and
then started deleting files on sd. It is possible the problems are in multiple locations,
It is also possible that multiple attempts have an effect.
I personally feel I need both stock 3e and insecure cwm [and odin and adb] to be able to recover this tab. The broken 3e/reboot was my worst experience on this so far.
Use linux tar or the tab's busybox tar, to create an uncompressed tar with recovery.img as the only file. Do not use 7zip to create the tar, it didn't work for me (although it works fine to extract from the stock).
davp said:
Sorry, not as clear cut as that... I did three things, cleared cache, cleared hidden, and
then started deleting files on sd.
Click to expand...
Click to collapse
You mean you did this in CWM recovery? Because I hastily flashed the stock ROM when it wouldn't boot, and then I couldn't get into the recovery anymore and there was no way to flash CWM recovery from PC Odin, or is there?
SD you mean internal? Since with external you just pull it out...
This was my worst experience as well, and want to be ready if it ever happens again.
So to sum it up. If the /data is messed up, should we do the following?
1. In CWM recovery clear cache, clear hidden.
2. Flash stock e3 recovery.
3. In stock recovery wipe everything.
4. Flash stock ROM.
5. Boot.
6. Flash CWM recovery.
7. Restore backup.
please i have the same problem,where i find the stock e3 recovery?
thanks Davp!
---------- Post added at 03:29 PM ---------- Previous post was at 02:53 PM ----------
please,post a link for download the recovery.img tar for to flash with odin.this is my last hope!
I have flashed my GT-i9003 back to Ginger bread from Jelly bean. and after flashing it successfully i get into a boot loop, and after that i get into the recovery mode and try to wipe data/factory reset my phone i get this error. i dont know what to do next. ive instaling the cfroot kernel and tried restoring my backups but im still stuck at boot loop and i cant do the wipe data or factory rest and still it shows the error.
need some help and its very urgent...
rfs format failed on /dev/block/stl10
fixed
renycyril said:
I have flashed my GT-i9003 back to Ginger bread from Jelly bean. and after flashing it successfully i get into a boot loop, and after that i get into the recovery mode and try to wipe data/factory reset my phone i get this error. i dont know what to do next. ive instaling the cfroot kernel and tried restoring my backups but im still stuck at boot loop and i cant do the wipe data or factory rest and still it shows the error.
need some help and its very urgent...
rfs format failed on /dev/block/stl10
Click to expand...
Click to collapse
Fixed it, thanks to shriomman who had advised me on what to do.
downloaded XXKPE rom from sammobile.com and flased it. then i flashed DDLF2 and that seemed to work for me.. now i successfully flashed back to GB from JB
it worked !!!
renycyril said:
Fixed it, thanks to shriomman who had advised me on what to do.
downloaded XXKPE rom from sammobile.com and flased it. then i flashed DDLF2 and that seemed to work for me.. now i successfully flashed back to GB from JB
Click to expand...
Click to collapse
Thanks a lot, it worked for me as well
Same problem here!!
GUYS I have the same problem here
what did you do exactly to solve it?
Sweet !!!!!!!!!!
renycyril said:
Fixed it, thanks to shriomman who had advised me on what to do.
downloaded XXKPE rom from sammobile.com and flased it. then i flashed DDLF2 and that seemed to work for me.. now i successfully flashed back to GB from JB
Click to expand...
Click to collapse
Had the exact same problem... Worked perfectly, and I had no faith in it working. Very useful to read this post.
I'm going to summarize my experience:
1. Repartition with PIT file (take out battery, put it back in, and again to downloading mode with combination buttons)
2. Flash XXKPE
3. Then flash the gingerbread firmware you desire. DONE !!!!
rfs format failed on /dev/block/stl10
gidiem said:
Had the exact same problem... Worked perfectly, and I had no faith in it working. Very useful to read this post.
I'm going to summarize my experience:
1. Repartition with PIT file (take out battery, put it back in, and again to downloading mode with combination buttons)
2. Flash XXKPE
3. Then flash the gingerbread firmware you desire. DONE !!!!
Click to expand...
Click to collapse
i got the same situation i flashed cyanogenmod 9 and after that returnrd to stock rom with ddlf2 but my phone undergoes bootloop and not starting somebody please help me with links....
rfs format failed on /dev/block/stl10
Hi Guys,
I tried to flash my Stock Firmware (JPJV6 ) recovery 3e , Gingerbread 2.3.3 in GT-i9000 using odin 3 v 3.07 . I downloaded 'one file' firmware for my device from samsung-updates website.
Then i flashed the 'one file' keeping it in PDA with NO PIT & Repartition-Unchecked...Successfully it flashed and rebooted .
Now it stopped in recovery mode with this E:failed to mount /dbdata....& E: rfs format failed on /dev/block/stl10
So when i reboot the device it everytime goes to Samsumg S Logo and reboots again (BOOTLOOP).
Please provide me solution to get back my stock firmware.
Thanks,
Mohammed Shahid
shahid_s said:
Hi Guys,
I tried to flash my Stock Firmware (JPJV6 ) recovery 3e , Gingerbread 2.3.3 in GT-i9000 using odin 3 v 3.07 . I downloaded 'one file' firmware for my device from samsung-updates website.
Then i flashed the 'one file' keeping it in PDA with NO PIT & Repartition-Unchecked...Successfully it flashed and rebooted .
Now it stopped in recovery mode with this E:failed to mount /dbdata....& E: rfs format failed on /dev/block/stl10
So when i reboot the device it everytime goes to Samsumg S Logo and reboots again (BOOTLOOP).
Please provide me solution to get back my stock firmware.
Thanks,
Mohammed Shahid
Click to expand...
Click to collapse
some please help. same problem
Follow these steps: (for Samsung Galaxy S1 i9000)
Download 3 file firmware I9000XXJVU_I9000OXAJVU_OXA.zip
Extract the firmware
Download Odin 1.83
Open Odin
Put your device into Download MODE (Home + Volume Down + Power)
Download Galaxy S PIT File s1_odin_20100512.pit
Click PIT and select s1_odin_20100512.pit
Click PDA and select CODE_I9000XXJVU_CL851880_REV03_user_low_ship.tar.m d5
Click PHONE and select MODEM_I9000XXJVU_REV_00_CL1092175.tar.md5
Click CSC and select GT-I9000-CSC-MULTI-OXAJVU.tar.md5
Then finally click START!
(Re-partition should be thicked)
Everything can be found on google for free
via SamMobile
Hi Guys
I have an samsung galaxy sl gt-i9003 it had stock rom 2.3.6 ddlf2 ,after i tried to root it with CF-Root for most I9003 firmwares DDLF2_CFROOT-05-07-2012.tar (CWM 5.0.2.8) it flashed succesfully and my phone booted then i copied the RemICS-JB v3.1 File to memory card after i tried to flash the rom according to the instructions it went to an boot loop
then when i factory reseted many times no use the i tried to come back to stock rom ddlf2 after it completed it showed this error
E:format_volume:rfs format failed on /dev/block/stl10
somekind of that error
try to flash with odin 1.83
it's using MTD partition layout, first flash will format your phone partition and reboot itself.(based on CM10A4 instruction)
After that flash again with the same file, then flash gapps.
alex88510 said:
it's using MTD partition layout, first flash will format your phone partition and reboot itself.(based on CM10A4 instruction)
After that flash again with the same file, then flash gapps.
Click to expand...
Click to collapse
hi alex
to move to stock rom should i flash any latona.pit with firmware files in odin
karthik gowtham said:
hi alex
to move to stock rom should i flash any latona.pit with firmware files in odin
Click to expand...
Click to collapse
Flash pit file then the firmware files WITHOUT bootloader file.
Sent from my GT-I9003 using xda app-developers app
oh man i searched all the post about the above error and downloaded many file but the good thing is my phone boots up but the bad thing is it STUCK in a boot loop
karthik gowtham said:
oh man i searched all the post about the above error and downloaded many file but the good thing is my phone boots up but the bad thing is it STUCK in a boot loop
Click to expand...
Click to collapse
This could solve your problems
Go to Download Mode
Flash xxkpe leaving the boot loader blank through odin form pc
fill the rest
wait for complete installation
reboot in recovery
wipe everything
reboot in download mode
again flash xxkpe now with bootloader
after flashing completed wait for reboot
now reboot in download mode
flash ddlf2 via pda
wait for completion of flashing
reflash bam 15 cr 7 kernel
http://forum.xda-developers.com/showthread.php?t=1355675
let it reboot.
follow the instructions given below
http://forum.xda-developers.com/showthread.php?t=1869820&page=44
thats it.
if your internel memory is corrupted then you can try this as a last chance
because it is very precise
http://forum.xda-developers.com/showthread.php?t=1651619
I recommend you to visit the samsung service centre if your internel memory is corrupt
its in egmore
very near the railway station
or else pm me
i've tried this guide and some others on the net, downloading files over files, tried with odin3 v1.85 and v3.09.
putting every time the phone in download mode and flashing the .tar.md5 file when doing it without the pit file it says "use the default pit", attaching the pit it gives a "secure check fail: id 0x95" and one time it displays "partition table doesen't exist".
It would be nice if anyone could help me as soon as possible!!:good:
I think ur partition memory currepted .....
Hit thanks if i helped
i thought it too couse it can't be that it says "partition table doesen't exist", if you know how to fix it, it would be great
ok
did you downloaded the correct firmware from sammobile.com ???
What were you doing when you bricked your phone??
yes, i did, but it also didn't work i tried different versions but niether that worked.
I bricked my phone flashing through cwm the same rom (cm10.2 by vickig coolest) in order to reinstall the gapps which weren't working before.
Now i tried flashing cm10.2 by dirty developer and it says "e: can't open /sdcard/cm-10.2-20131216-DirtyDev-trebon.zip" if someone could give me a working backup (cwm 6.0.3.3) i could try to restore it.
Dude
While flashing stock firmware open odin and click on nandroid erase all
And then flash firmware
After reboot do a hard reset
Hope it works
Sent from my GT-S5282 using Tapatalk