any one have the schematic? - T-Mobile myTouch 4G Slide

so i recently purchased a used doubleshot to give to my fiance, her biggest deal about a phone seems to be the camera and her g2 just isnt cutting it. well im cheap and handy so i buy all my phones broken and just fix them.
i found this almost mint doubleshot for about $50 with the only problem being the internal speaker is shot. so this is should be a hardware fault most likely but to be safe i rooted it and gained radio s-off and flashed a few roms. definitely hardware. so i bought a speaker for $7 (should be here by weeks end) and looking around i see the main flex being sold with the internal speaker attached. this got me wondering if the speaker simply sits against the contact points (my experience on well every phone ive disassembled) or is it soldered or what?
i dont mind doing the extra effort but google has not explained to me what i should expect. i even called htc and of course got the id love to help but i just cant response. so if anyone has experience with this or can point me to a full breakdown (not just digitizer replacement as it skips this) i would be forever grateful. thanks!

Here is a guide to help aid you in the taking apart of a doubleshot.. I'm not sure what help it is, but this is all I can personally help you with as I haven't any experience with this. http://forum.xda-developers.com/showthread.php?t=1586028
::Respect::

demkantor said:
so i recently purchased a used doubleshot to give to my fiance, her biggest deal about a phone seems to be the camera and her g2 just isnt cutting it. well im cheap and handy so i buy all my phones broken and just fix them.
i found this almost mint doubleshot for about $50 with the only problem being the internal speaker is shot. so this is should be a hardware fault most likely but to be safe i rooted it and gained radio s-off and flashed a few roms. definitely hardware. so i bought a speaker for $7 (should be here by weeks end) and looking around i see the main flex being sold with the internal speaker attached. this got me wondering if the speaker simply sits against the contact points (my experience on well every phone ive disassembled) or is it soldered or what?
i dont mind doing the extra effort but google has not explained to me what i should expect. i even called htc and of course got the id love to help but i just cant response. so if anyone has experience with this or can point me to a full breakdown (not just digitizer replacement as it skips this) i would be forever grateful. thanks!
Click to expand...
Click to collapse
Send a message to jjbz. I traded my bricked DS for a working one with him and he said he's going to use my old one for parts.
Sent from Spaceball One.

The internal speaker is soldered down to the ribbon cable. If you are going to attempt to replace it yourself be vary careful of the light and proximity sensors. I fried the proximity sensor when I attempted to solder in a new speaker. After a month of dealing with the missing proximity sensor, I went with a new ribbon cable.

Related

[Q] Nexus One main microphone repair/replacement?

Hi all,
I've recently had a crash - my N1 fell out from my pocket while climbing (stupid, I know..) - cracked screen, all that.. I've managed to replace the digitizer without big problems, but I have a more serious issue: the main (built-in) microphone stopped working and now I have to use the headset for every call
I've sent it to HTC service and they said the motherboard needs replacing and wanted me to pay 300$ for it..
Since it's quite a lot for a microphone, before buying the new one (at least 200$ for tho mobo alone) or sending it again to the HTC guys for repair, I'd like to ask you if there is anybody who had anything to do with those microphones or issues similar to mine.
The microphone itself is a small gold rectangle-shaped thing glued to the motherboard, but I cannot make out any markings on it (there seems to be something written on it, it's just not readable any more). It seems to be exactly the same as the noise-cancelling one near in the upper part of the phone. Of course, before cutting or soldering anything I'd like to know as much as I can..
So.. the questions are:
Has anyone repaired a thing like that or managed to replace a microphone on Nexus One motherboard? How could this be done?
Does anybody know where I could buy a microphone that would match?
I know it's a long shot (and a long post ), but I figured it's worth a try to look for somebody who might have some insight.
Thanks in advance,
Kuba
P.S. Could anyone move this question to Q&A, please?..first post gone wrong..
you could just buy a new one for under 300$ on ebay or a used one for less than 220 for everything new If something like that is messed up its not worth fixing, too much work
hitmanre,
thanks for the reply, but...
As I said, I figured the part on buying another mobo (or a broken N1 for parts) on my own.
I was just curious - from a DYI perspective - what's going on on the board and what's actually broken around the microphone.. If it was only the microphone then it should be easy enough to replace - but if it's a crack somewhere in the inner layers of the board, then bummer..
In fact, I opened my N1 again yesterday and cut the mic out...curious thing is that there seem to be only one connected soldered part between mobo ant the mic.. Could anyone explain how a microphone could work with a single connector? there doesn't seem to be any ground connection anywhere..
If I have some time, I'll post photos - but no sooner than in a week - going on vacation
See you,
Kuba
I have the same problem, and I live outside the service coverage area. I've had my Nexus One since May 2010, so it was more than one year old. It's really sad to quit such a really nice phone just because it can't make phone calls. It seems that nobody here in Lima know how to repair a N1. And I'm so afraid to open it...
I have seen 2 of these phones with the same issue. one mine and second a customers. and I have tried replacing the mic headset jack (headset jack can short out audio) and still nothing. mic works with loudspeaker but not in normal mode with earspeaker.
ok today I was able to get my hands on a working nexus. and swapped the upper flex and that fixed it.
the only thing is that we ordered this part from one of our sources to fix a power button (which is on the same part) and it had this issue. so I had to replace it again
blevinski said:
ok today I was able to get my hands on a working nexus. and swapped the upper flex and that fixed it.
the only thing is that we ordered this part from one of our sources to fix a power button (which is on the same part) and it had this issue. so I had to replace it again
Click to expand...
Click to collapse
I also have a problem with the mic suddenly not working and working again suddenly. So it must be a damaged flex since the phone has a dent on the upper left part of it.

[Q] Anyone else with a buzzing earpiece?

I bet I'm not the only person with this problem, but I have a brand new Sensation with a buzzing speaker. I've taken the cover off and looked for hairs in the grille and whatnot, to no avail. I even took off the protective sticker to see if that helped anything... nope.
The problem gets worse as the volume goes up.
I bought this from of someone on Craigslist who was selling a couple of them, new in box (he had bought them at Wal-Mart). Should I contact HTC?
zakool21 said:
I bet I'm not the only person with this problem, but I have a brand new Sensation with a buzzing speaker. I've taken the cover off and looked for hairs in the grille and whatnot, to no avail. I even took off the protective sticker to see if that helped anything... nope.
The problem gets worse as the volume goes up.
I bought this from of someone on Craigslist who was selling a couple of them, new in box (he had bought them at Wal-Mart). Should I contact HTC?
Click to expand...
Click to collapse
Yes. It should be coveted under warranty irregardless of where you bought it from as the device itself is only a month old. They do not need proof of purchase
Swyped from my HTC Sensation Pyramid using my thumb and eyes
Thanks -- Talked to both HTC and T-Mobile.
HTC said they would repair it if I sent it in. T-Mobile said that I needed the phone to show up on my account (I only bought it last night) before they could determine warranty info, and that I'd be better of getting the receipt (which I don't have) and taking it back to the store it was purchased from.
However, I took the liberty of taking the back casing off, taking the speaker protective sticker off, and blowing some air into the speaker area. That seems to have fixed the problem and it looks like I won't have to send them the phone after all.
I also have a buzzing noise. A first device I had was producing such a strong buzzing that I asked for an exchange. The second one is only producing this noise on certain calls and gets worse when increasing the volume. I an also wiling to try to clean buy I fear to void warranty by removing the sticker.
The sticker comes off very easily with a razor blade and is very easily replaceable. Remember, you're only removing a grille speaker, not the "void" sticker. Nobody could possibly be any the wiser.
zakool21 said:
However, I took the liberty of taking the back casing off, taking the speaker protective sticker off, and blowing some air into the speaker area. That seems to have fixed the problem and it looks like I won't have to send them the phone after all.
Click to expand...
Click to collapse
Have not solved the issue for me.
Takeshi_Kintaro said:
Have not solved the issue for me.
Click to expand...
Click to collapse
That is very bad news. I was hoping that was the solution.
Crap, I swapped a pretty good working sensation having dust for a sensation having no dust but with a massive buzzing noise when having a conversation. Right now, I hate htc.
eadred said:
Crap, I swapped a pretty good working sensation having dust for a sensation having no dust but with a massive buzzing noise when having a conversation. Right now, I hate htc.
Click to expand...
Click to collapse
+1 1234567890
So, I will return my third sensation because of the buzzing problem. My shop is going to hate me so bad. On the other hand, no really my fault, is it?
But I will certainly not take another sensation for now. I will check back in a few months if htc has fixed the issues. I have no use for a phone that cannot make phone calls properly!
Can't believe htc is making such sophisticated devices, but is unable to make the mere phone function work properly.
I noticed my earpiece makes a light crackling noise when in phone calls. It does get worse with increased volume. I am going to deal with it for now and see if for some reason it gets better. I REALLY dont want to have to try and return my phone because I just returned another one and I dont want to be one of those people that abuses the warranty system.
Getting a buzzing on my new Sensation earpiece when on the phone, gutted right now. Just contacted HTC.
Sending my phone back, after 5 days, i can't stand it any longer!
Also have this problem... I'm going to try and replace it tomorrow
I hope they won't give me a refurbished one... I just bought mine on Saturday...
I noticed the buzzing yesterday. I have only had the phone for 3 days. I imagined I would be the only one having this problem. I don't have any problems returning the phone. I haven't returned one before, but I don't think I should have to settle for a brand new phone that can't perform its most simple function.
have the same problem ....
I replaced the phone today, after A TON of arguing with the store clerk... They were trying to make me send the phone to HTC warranty service, but in the end they gave in.
The new one only exhibits this problem moderately at the loudest speaker setting. Below or at medium it is not noticeable.
Overall I'm pleased with the outcome
so if this is a common issue
if I send my phone to the repair center how are they gonna repair it ...
Also the spare parts must be broken...
Not all of them are like that...Odds are you'd get a "better" device
Just got my Sensation today and am having the same issue: distortion at all volume levels - it sounds almost like a blown earpiece. I will probably end up exchanging it soon as I cannot stand the noise during calls.

Chances that an LCD + digitizer will fix this?

A coworker I started working with a few months ago told me about the much-better Sensation he had before his MyTouch 3G. It seems that he still had it, but stopped using it "because the screen cracked." I correctly surmised that it was a simple and cheap to replace touch screen digitizer and described to him that it was "just the glass cover" and that it was "cheap to replace." I have done many such repairs on other phones and gadgets.
He then told me that he had continued to use it until the LCD went blank. There is no reason to think that the LCD inside suddenly cracked, but I can only assume that it also sustained some kind of damage and now also requires replacement. Knowing that the LCD isn't cracked, what are the chances that a replacement LCD + digitizer will restore the phone? I'm concerned because we've already purchased a kit for $65.
Nobody can tell you that off the internet. If we do, that would be pure guess, just as accurate as you would have guessed.
sawo said:
Nobody can tell you that off the internet. If we do, that would be pure guess, just as accurate as you would have guessed.
Click to expand...
Click to collapse
Well, someone could have had the exact same problem and already tried it. I ran into people with the same problem already. I'm just looking for more because some, no doubt, have tried it and others may have an alternate explanation. Reasonable.
there is a good chance that will fix the problem. but since the LCD was working for a while until it blank out, it is possible the problem might be with the circuit board. only way to know is to try it out.
CZroe said:
Well, someone could have had the exact same problem and already tried it. I ran into people with the same problem already. I'm just looking for more because some, no doubt, have tried it and others may have an alternate explanation. Reasonable.
Click to expand...
Click to collapse
The LCD could go blank for several reasons. Faulty LCD, loose cable, faulty board etc. etc. Even if someone had the same problem, the reason for it could be completely different, thefore this wont help you at all except for giving you hope. If this is what you need, then i would say "yes, the change of lcd & digitizer should fix the problem" but you never can be sure unless you try When you start the phone, do you hear the startup sound? This could at least indicate that the phone isnt completely faulty.
brabusamg55 said:
there is a good chance that will fix the problem. but since the LCD was working for a while until it blank out, it is possible the problem might be with the circuit board. only way to know is to try it out.
Click to expand...
Click to collapse
The plus side is that you can't make it worse. So you've got nothing to lose by trying to repair it, other than the few bucks for the parts.
Well, I took it apart to re-seat all the cables and it's still blank. Reading online, I see that a lot of dropped Sensations/Pyramids develop a loose/broken SMT capacitor component near the headphone jack, but I'm not registered on any of the forums I see it discussed on and I can't see the pics. They describe a slightly different problem anyway (screen goes blank after standby). I needed sleep, so I put it all back together and I'll check that out when the parts get here. My hunch is that the LCD panel is fine and that I'll have an extra, assuming the capacitor problem is fixable. I've done some delicate soldering work before but I can't really say that I'm good at it! I didn't see any loose SMT components rattling around so I hope it didn't fall completely out somewhere.
Skipjacks said:
The plus side is that you can't make it worse. So you've got nothing to lose by trying to repair it, other than the few bucks for the parts.
Click to expand...
Click to collapse
Thanks but it's almost $70 for the parts.
Works great! Well, it had the touchscreen sensitivity issue pretty badly but the T-Mobile OTA update fixed that. Transferring all the adhesive bits from one screen to another was down-right frustrating, but I pulled it off and I only see a single spec of dust inside. The dude will be thrilled. I broke the earhook on my Looxcie so I did not make a video but it was full of me tearing and ripping the things anyway and not a good example of how it should be done!
FWIW, there was no way to remove the old screen without denting up the backing plate and prying the heck out of it to free it from multiple adhesives and glues, so I would not have had two good LCDs after testing the replacement even if there was nothing wrong with the original. Good thing it was the LCD at fault! I didn't have to drill anything like the glass replacement video I watched instructed me to do. They didn't realize that the LCD removal allows the flex PCB through just fine. I forgot to thread it back through before seating the replacement LCD in the adhesives and tape left-overs but it flexed enough to allow it through without removing, which was quite a relief after seeing how the original fared after being removed.

HTC Sensation Screen replacement

Hey guys, New to the HTC sensation threads (its my Girlfriends phone)
Got her this phone about 6 months ago - 1 week after having it she dropped it and broke the digitizer anyway i got that fixed at my local phone shop with aftermarket digitizer - it worked well but you could tell it was not genuine.
anyway the other week i dropped it and broke the lcd screen yet the digitizer is fine and the phone is still 100% useable - except the display looks awful.
Does anyone know if this is an easy fix, is it worth fixing myself or taking it to the phone shop - Im embarrassed to go back and explain how it has broke again lol.... But i need to get it fixed, Im so close to having my wang removed by my girlfriend.
I was wondering whether or not HTC themselves would repair it ? and maybe replace the digitizer too, I dont mind paying the extra £££ for genuine parts and to be fixed by genuine HTC repairmen..
Any ideas how i can get out this mess ??
sorry for the long post.
Thanks
Off course HTC will repair it, but it'll take longer and probably charge you a lot more than what you can it fixed for.
Out of curiosity do you/your girl not put the phone in a case or something?
nba1341 said:
Out of curiosity do you/your girl not put the phone in a case or something?
Click to expand...
Click to collapse
Haha, no i did not.. But as soon as i get it fixed im gunna invest in a bulletproof / bombproof carbon kevlar box and keep it locked inside it !!!
Was it bought through a carrier or sim free? Could always take it to your carrier and see what they suggest, although they're not normally the cheapest, but at least it should get done properly.
Yeah i got it through vodafone, I think i will give them a call and see what they say.
I was considering taking out insurance, then in a few days call them and tell them its broken, This is risky.... what do you think the odds are with me getting away with it ?
Do you think they would notice the aftermarket digitizer ? It is an exact replica with HTC on it....
these damn phones are so fragile.... I miss the old nokias
EDIT: Seen this and am tempted to get it and fix it myself..... http://www.lingosbox.com/product_info.php?language=en&currency=GBP&products_id=4769
opinions ??
No, you won't get away with it, and it's dishonest, anyway. Don't make yourself a criminal over a cell phone.
Now, that being said, check Ebay. There are lots of vendors in the UK and elsewhere (lots here in the US) that sell replacement screen kits, many of which include instructions and tools.
If you're handy with small tools and careful, you can do this yourself for a fraction of what it will cost you to have it done. I learned this when my kid's iPod battery died some years ago. They're not user replaceable, and Apple wanted some outrageous amount to do it, plus you had to send it away. I found a guy on line that sold batteries with tools and directions, and in 20 minutes, she was good as new.
Pays to do it yourself.
azzledazzle said:
Yeah i got it through vodafone, I think i will give them a call and see what they say.
I was considering taking out insurance, then in a few days call them and tell them its broken, This is risky.... what do you think the odds are with me getting away with it ?
Do you think they would notice the aftermarket digitizer ? It is an exact replica with HTC on it....
these damn phones are so fragile.... I miss the old nokias
EDIT: Seen this and am tempted to get it and fix it myself..... http://www.lingosbox.com/product_info.php?language=en&currency=GBP&products_id=4769
opinions ??
Click to expand...
Click to collapse
joe.attaboy said:
No, you won't get away with it, and it's dishonest, anyway. Don't make yourself a criminal over a cell phone.
Now, that being said, check Ebay. There are lots of vendors in the UK and elsewhere (lots here in the US) that sell replacement screen kits, many of which include instructions and tools.
If you're handy with small tools and careful, you can do this yourself for a fraction of what it will cost you to have it done. I learned this when my kid's iPod battery died some years ago. They're not user replaceable, and Apple wanted some outrageous amount to do it, plus you had to send it away. I found a guy on line that sold batteries with tools and directions, and in 20 minutes, she was good as new.
Pays to do it yourself.
Click to expand...
Click to collapse
I totally agree with you !! i do not want to result to fraudulent behaviour... BUT, i dont want to pay approx £80 for parts and make the whole situation worse by possibly making more damage.
BUT i also dont want to pay approx £150 - £200 thinking i could of fixed it for much less by doing it myself.
I am good with stuff like that and am very gentle and careful..... but i dont believe in myself lol
I recently replaced mine. Its not too terribly hard to do. But you have to get it just right. Currently the digitizer is a bit slow and unresponsive at time but I think i didnt get it in there completely right. So I'm going to dissaimble is again today and get it suck in better and see of that helps
Sent from my cm_tenderloin using Tapatalk
Since the Sensation screen is made by two different manufactures is it possible to mix and match them or do you have to replace the screen with the same one with phone came with? I have a Sensation that needs a LCD that I have not taken apart yet. Im wanting to get the better screen but im not sure if I can just put the better screen in it if thats not what it came with in the first place.
silentsnow31802 said:
Since the Sensation screen is made by two different manufactures is it possible to mix and match them or do you have to replace the screen with the same one with phone came with? I have a Sensation that needs a LCD that I have not taken apart yet. Im wanting to get the better screen but im not sure if I can just put the better screen in it if thats not what it came with in the first place.
Click to expand...
Click to collapse
Well it's much better to replace it with the same display just to be sure it's going to work. There's also a side by side comparison of the Sharp and Acer (AUO) displays
That said, you can check what panel you have using the instructions on this thread:
http://forum.xda-developers.com/showthread.php?t=1131592
dgenx210 said:
Well it's much better to replace it with the same display just to be sure it's going to work. There's also a side by side comparison of the Sharp and Acer (AUO) displays
That said, you can check what panel you have using the instructions on this thread:
http://forum.xda-developers.com/showthread.php?t=1131592
Click to expand...
Click to collapse
The display on my phone is completely destroyed so I cant use terminal emulator to look it up :-(
EDIT: I was doing some research on the part numbers on the back of my screen and I found this thread...
http://pdaclub.pl/forum/sensation/dziwny-kurz-pod-dotykiem/
Post #8 has my same part number as mine (74h02057-00M) listed and in the same sentence AUO. So I have to assume it had the AUO screen which kinda sucks.
silentsnow31802 said:
The display on my phone is completely destroyed so I cant use terminal emulator to look it up :-(
EDIT: I was doing some research on the part numbers on the back of my screen and I found this thread...
http://pdaclub.pl/forum/sensation/dziwny-kurz-pod-dotykiem/
Post #8 has my same part number as mine (74h02057-00M) listed and in the same sentence AUO. So I have to assume it had the AUO screen which kinda sucks.
Click to expand...
Click to collapse
If somehow you can get it to get recognized by adb, you can issue the dmesg from there by using 'adb shell dmesg'
Sent from my HTC Z715e
dgenx210 said:
If somehow you can get it to get recognized by adb, you can issue the dmesg from there by using 'adb shell dmesg'
Sent from my HTC Z715e
Click to expand...
Click to collapse
I dont even have a battery for it at the moment. When the battery arrives ill check it out. I have a feeling im not going to be able to get ADB working though.
I bought this!
http://www.ebay.com/itm/260959508044?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
Ill let you all know how it turns out....
Well I got the screen and digitizer from the link above today. Installed it and its perfectly fine. No lag anywhere, registers touch like the stock one did. The LCD panel seems to be the same quality as the AUO panel but thats fine with me since im pretty sure this phone came with the AUO from the factory. If you do decide to replace your screen and digitizer i suggest getting them as separate pieces. Having them attached to each other made it sorta difficult to get back together cleanly.
silentsnow31802 said:
Well I got the screen and digitizer from the link above today. Installed it and its perfectly fine. No lag anywhere, registers touch like the stock one did. The LCD panel seems to be the same quality as the AUO panel but thats fine with me since im pretty sure this phone came with the AUO from the factory. If you do decide to replace your screen and digitizer i suggest getting them as separate pieces. Having them attached to each other made it sorta difficult to get back together cleanly.
Click to expand...
Click to collapse
Glad you finally got it sorted. Welcome back to you then
azzledazzle said:
Hey guys, New to the HTC sensation threads (its my Girlfriends phone)
Got her this phone about 6 months ago - 1 week after having it she dropped it and broke the digitizer anyway i got that fixed at my local phone shop with aftermarket digitizer - it worked well but you could tell it was not genuine.
anyway the other week i dropped it and broke the lcd screen yet the digitizer is fine and the phone is still 100% useable - except the display looks awful.
Does anyone know if this is an easy fix, is it worth fixing myself or taking it to the phone shop - Im embarrassed to go back and explain how it has broke again lol.... But i need to get it fixed, Im so close to having my wang removed by my girlfriend.
I was wondering whether or not HTC themselves would repair it ? and maybe replace the digitizer too, I dont mind paying the extra £££ for genuine parts and to be fixed by genuine HTC repairmen..
Any ideas how i can get out this mess ??
sorry for the long post.
Thanks
Click to expand...
Click to collapse
You must of dropped that phone from ten stories lol.. I rarely seen any lcd screen break or crack on the sensation. Being its made from aluminum and the screen is Gorilla Glass.. its tough stuff.. but sorry to hear that
mckellick said:
You must of dropped that phone from ten stories lol.. I rarely seen any lcd screen break or crack on the sensation. Being its made from aluminum and the screen is Gorilla Glass.. its tough stuff.. but sorry to hear that
Click to expand...
Click to collapse
well the day after i got it fixed i knocked it off the side onto tiled flooring, it cracked the lcd but not the digitizer... so weird lol
anyway since then i have had some signal issues with my provider, they have established that the handset is faulty, they are collecting it to repair it.
I still havent had the screen fixed so im just going to see what happens when they go to repair it, Maybe they will think they broke the screen and fix it before returning it to me. Or maybe they wont.... if thats the case i will argue with them that it was fine before they took it away from me
after all, they must have 100's of these phones in boxes gathering dust in their warehouse(s) so a little arguing and im sure i will get it fixed / replaced.
Shhhhh Moms the word !!!
azzledazzle said:
well the day after i got it fixed i knocked it off the side onto tiled flooring, it cracked the lcd but not the digitizer... so weird lol
anyway since then i have had some signal issues with my provider, they have established that the handset is faulty, they are collecting it to repair it.
I still havent had the screen fixed so im just going to see what happens when they go to repair it, Maybe they will think they broke the screen and fix it before returning it to me. Or maybe they wont.... if thats the case i will argue with them that it was fine before they took it away from me
after all, they must have 100's of these phones in boxes gathering dust in their warehouse(s) so a little arguing and im sure i will get it fixed / replaced.
Shhhhh Moms the word !!!
Click to expand...
Click to collapse
Lol yeah I bet they do..but most of the insurance phones you get after your device breaks are refurbished. Cheap beat up and abused.. then recycled.. lol that sounded like a lifetime channel movie. Well I hope your back up and running again..and how'd that tile doing? Cheers mate
Sent from Xparent Cyan Tapatalk HTC Sensation 4G with Beats and a kickass Rom

Phone dropped, screen dead... Options?

Hey guys, the GF left her phone up high and was knocked down and now the screen seems to be dead. Lights up for a moment when turning on then just goes dark. Pretty sure it's operating fine underneath (still need to plug in to computer to check for connectivity), but assuming just the screen needs to be replaced, what are my options?
Is that something I could possibly replace or perhaps send it off to somebody on this forum for repair? How much ($) are we looking to fix? Better to just sell on ebay?
Thanks!
I did a quick search on ebay concerning a new LCD for the Atrix 2 and they seem to cost around 80 bucks... I don't know if that would be a worthy investment since depending on your contract you can maybe get a new one for about that price...
What I can tell you from personal experience is that it is most likely to be a major pain in the ass to replace the screen on your own... I once changed the front frame of my HTC Desire and I basically had to disassemble EVERYTHING including unglue-ing the touchpanel from the frame taking out all sorts of boards and stuff, and I never got rid of the little dust that would get between digitizer and LCD..... (the memories )
But I'd say if you're confident in your technical skills and a new LCD would be worth your money then you might consider going for it...
I don't know but I'd estimate the cost of a professional repair around $150-$200...
One tip just in case: Make sure that no dust gets onto your screen/on the inside of your tuchpanel because once you start "cleaning" it off (with a towel) you'll never get it as clean as it was...

Categories

Resources