Database Info

Heimdall cwm bad flash?

Last night i decided to flash a Rom. When i used qkster's cwm obey click it never left the Samsung screen. I flashed back to stock after 15 minutes. Did i do something wrong or why did it not boot. When i tried to enter recovery after i flashed to stock the Samsung screen. Popped up 2 times before it went to recovery. Anybody know why?
Thanks in advance.
Sent from my SAMSUNG-SGH-I997 using XDA

isaiahe97 said:
Last night i decided to flash a Rom. When i used qkster's cwm obey click it never left the Samsung screen. I flashed back to stock after 15 minutes. Did i do something wrong or why did it not boot. When i tried to enter recovery after i flashed to stock the Samsung screen. Popped up 2 times before it went to recovery. Anybody know why?Thanks in advance.
Sent from my SAMSUNG-SGH-I997 using XDA
Click to expand...
Click to collapse
Not sure what you did...not saying you did something wrong but 15min, that is a long time to do the one click method, below are how i perform using qkster's method...is it working your phone good now?
The USB + Volume Down + Volume Up Method: Download mode (Noticeable by an Android robot digging with a shovel) is reached by taking everything out (Battery, SIM, MicroSD). plug in the USB cable to your computer and phone then putting in battery at the same time Holding the volume buttons both up and down, (Don't press the power button at all in this method).
How to INSTALL:
1. Put your phone into Download Mode.
2. If you have not used Heimdall, you will need to set up the driver for device recognition.
3. Once your device is connected, the DEVICE STATUS should show: CONNECTED. The long FLASH bar will also turn on for flashing.
4. Click on the FLASH button. (In my opinion: I recommend that you do this in a safe environment. Do not disturb your phone will flashing this firmware. Turn off Antivirus. Do not run any other programs, upload/download/youtube/burning DVD etc)
5. Once it has completed, your phone will reboot. You will hopefully see the ATT logo and reboot into STOCK UCLB3.
6. If it did not work, you will have to put it back into DOWNLOAD mode and reflash a second time, with the FLASH BOOTLOADER box checked. This is more likely if you never had proper Gingerbread bootloaders on your phone, if you are coming from FROYO or if you never had Odin a Gingerbread leak to get your bootloaders.
download this file for your one click to stock...and using above directions...
once that is done and you want to put CWM mod on for flashing a custom ROM, same directions to get in to download mod...
download this file to use the one click to put CWM mod on your phone
here is the link where i took all this...
http://forum.xda-developers.com/showthread.php?t=1524081

isaiahe97;
how we doing did you get it going...status check?

Haven't tried it yet I will tomorrow...hopefully it works this time around
Sent from my SAMSUNG-SGH-I997 using XDA

[Q] Help: BRICK'd. can't boot into anything (recovery, download, etc)

background: rooted and was running 4.1 stock and CWM 10.0 on verizon gs3. i wanted to bump up to jelly bean 4.2 with CWM 10.1.
first i tried using Rom Manager and Rom Toolkit to flash a new rom. from Rom Manager, i rebooted into recovery and got stuck on the CWM boot screen.
After 30 minutes or so i pulled the battery and tried flashing the stock .tar.md5 using Odin and ended up with this:
"System software not authorized by verizon wireless has been found on your phone. Please turn off your phone and go to the nearest verizon wireless store for help."
now i can't boot into download or recovery. i just have this screen with the yellow exclamation point and the above message.
how screwed am i? i've tried reading everywhere and from what i can gather i didn't wipe my cache sufficiently, but all the other threads just say 'use Odin to get back to stock', but i can't get into download mode so i can't use odin.
please help.

You're bootloader wasn't unlocked. Pull the battery then hold power, volume down, and home for fifteen or twenty seconds until it boots into download mode. Odin flash a stock rom then root AND ALSO unlock your bootloader.
Sent from my SCH-I535 using xda app-developers app

SlimSnoopOS said:
You're bootloader wasn't unlocked. Pull the battery then hold power, volume down, and home for fifteen or twenty seconds until it boots into download mode. Odin flash a stock rom then root AND ALSO unlock your bootloader.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
I have noticed that a lot of people have not unlocked the bootloader are posting on here that they have "bricked" their phones.

jmxc23 said:
I have noticed that a lot of people have not unlocked the bootloader posted on here that they have "bricked" their phones.
Click to expand...
Click to collapse
Ha, I agree although I think its occurred in decreasing fashion since August. Being "bricked" is used overeagerly by folks not wholly understanding their situation. You really have to try to brick this device before that word can be used correctly.

Your phone has not been bricked. You will know that you have bricked your phone when you can't turn on your phone at all. No download mode and no recovery mode also no pulling of the battery just a dead phone.

ClockworkMod
When you fix your phone, root then unlock the bootloader... You can try RM again but I believe that it is best to use ClockworkMod (or the Touch version) for flashing instead of ROM Manager - old fashion, maybe, but it works!
NOTE: Once you start flashing it becomes addictive - you have been warned

thanks for the comments. my apologies for using the term Brick incorrectly as it seems to really chap the cheeks of some people on this board (http://forum.xda-developers.com/showthread.php?t=2149210)
no luck with holding down buttons with the battery pulled. i ordered a USB Jig to try and force it back into download mode.
From there, what should my first step be? return to stock?

jondotwoz said:
thanks for the comments. my apologies for using the term Brick incorrectly as it seems to really chap the cheeks of some people on this board (http://forum.xda-developers.com/showthread.php?t=2149210)
no luck with holding down buttons with the battery pulled. i ordered a USB Jig to try and force it back into download mode.
From there, what should my first step be? return to stock?
Click to expand...
Click to collapse
youll need to put the battery back in......lol

ddurandSGS3 said:
youll need to put the battery back in......lol
Click to expand...
Click to collapse
obviously. i've tried this a million times. It shows the download screen green android robot and the text in the top left for about 4 seconds. then it goes black and the yellow triangle comes back telling me unauthorized software is on there.

check here. particularly post 2. i think thats what you want.
http://forum.xda-developers.com/showthread.php?t=1840030&highlight=odin

ddurandSGS3 said:
check here. particularly post 2. i think thats what you want.
http://forum.xda-developers.com/showthread.php?t=1840030&highlight=odin
Click to expand...
Click to collapse
thanks that's a very helpful thread. However, i still can't get into download/Odin mode. i'm guessing if/once the USB jig can force the phone into download mode, this is where i'll start.
thanks for everyone's help and patience.

[Q] Galaxy Blaze stuck at boot screen after odin Root

I havend a stock galaxy blaze running Jelly bean I just attempted to root it using odin followed instructions to perfect odin tells me success phone reboots and gets stuck at boot screen any ideas? Thx

Lostmymind904 said:
I havend a stock galaxy blaze running Jelly bean I just attempted to root it using odin followed instructions to perfect odin tells me success phone reboots and gets stuck at boot screen any ideas? Thx
Click to expand...
Click to collapse
You attempted to root using Odin when your already on a JellyBean ROM?? The Blaze doesn't have Official JB.. We have rooted JB ROMS like Cyanogenmod..

xWolf13 said:
You attempted to root using Odin when your already on a JellyBean ROM?? The Blaze doesn't have Official JB.. We have rooted JB ROMS like Cyanogenmod..
Click to expand...
Click to collapse
The phone was running stock ics then my mistake believe the problem is becuase i used the gingerbread.odin root method can you help me get back to Ics stock please? ..om getting really fustrated

Lostmymind904 said:
The phone was running stock ics then my mistake believe the problem is becuase i used the gingerbread.odin root method can you help me get back to Ics stock please? ..om getting really fustrated
Click to expand...
Click to collapse
Search and you shall find
Sent from my SGH-T769 using xda app-developers app

If you can get to download mode, you're fine. There's a thread in general on how to get our phone back to stock. Look through general and you'll find it!
Sent from a LiquidSmooth Blaze

njstein said:
If you can get to download mode, you're fine. There's a thread in general on how to get our phone back to stock. Look through general and you'll find it!
Sent from a LiquidSmooth Blaze
Click to expand...
Click to collapse
Thx Fixed it if anyone else is having this problem here.
http://forum.xda-developers.com/showthread.php?t=1591601

njstein said:
If you can get to download mode, you're fine. There's a thread in general on how to get our phone back to stock. Look through general and you'll find it!
Sent from a LiquidSmooth Blaze
Click to expand...
Click to collapse
What if I can't get to download mode? When I attempt to get there the phone just buzzes every couple seconds, but never goes into download mode. When I release, it goes to the battery charging icon. When I try to get to recovery mode, it vibrates and goes back to the Galaxy S splash screen and hangs. Thanks.

tdub97 said:
What if I can't get to download mode? When I attempt to get there the phone just buzzes every couple seconds, but never goes into download mode. When I release, it goes to the battery charging icon. When I try to get to recovery mode, it vibrates and goes back to the Galaxy S splash screen and hangs. Thanks.
Click to expand...
Click to collapse
If the screen is showing anything it should be able to get into download mode, but it can sometimes be difficult to get it to do it.
Here is a post that helped me and others to get into download mode.
http://forum.xda-developers.com/showpost.php?p=27360727&postcount=57

tdub97 said:
What if I can't get to download mode? When I attempt to get there the phone just buzzes every couple seconds, but never goes into download mode. When I release, it goes to the battery charging icon. When I try to get to recovery mode, it vibrates and goes back to the Galaxy S splash screen and hangs. Thanks.
Click to expand...
Click to collapse
Keep in mind, to get into download mode, you must have the phone disconnected from the computer! If it shows the charging battery icon, then your phone is plugged in. Unplug it and try again.
Sent from a Paranoid Blaze

7z file...
It could be that it's late and not thinking clearly but... I downloaded the "Stock Tar" and the problem I'm running into is that Odin won't recognize it because it's a 7z file. Could I get suggestions as to how to proceed?

rtcrane said:
It could be that it's late and not thinking clearly but... I downloaded the "Stock Tar" and the problem I'm running into is that Odin won't recognize it because it's a 7z file. Could I get suggestions as to how to proceed?
Click to expand...
Click to collapse
Extract it
Sent from my GT-N7100 using xda premium

ODIN not recognizing 7z file on Windows 7--HELP
rtcrane said:
It could be that it's late and not thinking clearly but... I downloaded the "Stock Tar" and the problem I'm running into is that Odin won't recognize it because it's a 7z file. Could I get suggestions as to how to proceed?
Click to expand...
Click to collapse
Did you get answer on how to fix this. Currently cant get ODIN to recognize the 7-zip extension so I can add it to the PDA field & get my Blaze back to stock. Thanks.

booyahb said:
Did you get answer on how to fix this. Currently cant get ODIN to recognize the 7-zip extension so I can add it to the PDA field & get my Blaze back to stock. Thanks.
Click to expand...
Click to collapse
Here's the answer:
Jserrano56 said:
Extract it
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
7z is a compression format. The files you want are in the compressed 7z file. Extract it using 7zip or WinRAR or any number of tools. Then ¡voila! you have what you need

[Q] Samsung Infuse 4g Stuck in Bootloop after Root

I updated the phones ROM and rooted it perfectly. In the process of the newest rom update, while in Clockword recovery mode - wipe data was accidentally selected, in the middle of the data wipe I tried to save the phone by removing battery. Now its stuck in bootloop, Recovery mode doesn't even come up, but I succeeded in getting the phone into Download Mode, but it has the Triangle up with CUSTOM BINARY DOWNLOAD: YES(2 COUNTS) and CURRENT BINARY :CUSTOM. I have used Odin to try to install the Stock Att version, still no luck. as of now the phone is bricked, and can only get it into download mode. Can somebody please help? Ill die if I can't fix this phone, and Just so you know, I don't have a USB jig to delete the custom binary files. Is that the only way I can get the phone to actually turn on and function? Help plz Im freakin here...

Sassy.Rainbow.Bong said:
I updated the phones ROM and rooted it perfectly. In the process of the newest rom update, while in Clockword recovery mode - wipe data was accidentally selected, in the middle of the data wipe I tried to save the phone by removing battery. Now its stuck in bootloop, Recovery mode doesn't even come up, but I succeeded in getting the phone into Download Mode, but it has the Triangle up with CUSTOM BINARY DOWNLOAD: YES(2 COUNTS) and CURRENT BINARY :CUSTOM. I have used Odin to try to install the Stock Att version, still no luck. as of now the phone is bricked, and can only get it into download mode. Can somebody please help? Ill die if I can't fix this phone, and Just so you know, I don't have a USB jig to delete the custom binary files. Is that the only way I can get the phone to actually turn on and function? Help plz Im freakin here...
Click to expand...
Click to collapse
After flashing to factory rom I get this error message: E:failed to mount /dbdata (File exists)
E:copy_dbdata_media:Can't mount /dbdata your storage not prepared yet, please use UI menu for forma and reboot actions.

Try using heimdall, go to download mode with that triangle.
here is op:
http://forum.xda-developers.com/showthread.php?p=23118134
Here is my upload if u want them:
http://d-h.st/users/bradman117/?fld_id=17853#files
if u don't now what to download here's my 2 links, using heimdall flash stock then flash kernel.
The kernel will give u root and recovery (faster way of rooting )
Sent from my Galaxy Nexus using xda premium

bradman117 said:
Try using heimdall, go to download mode with that triangle.
here is op:
http://forum.xda-developers.com/showthread.php?p=23118134
Here is my upload if u want them:
http://d-h.st/users/bradman117/?fld_id=17853#files
if u don't now what to download here's my 2 links, using heimdall flash stock then flash kernel.
The kernel will give u root and recovery (faster way of rooting )
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Thank you so much, my phone is working now. I just have to find a way to reset the binary download count(get rid of the yellow triangle) without purchasing a USB jig. Any suggestions? Im trying to update firmware to ICS and then Jelly bean. I tried flashing it to a newer version(ics), but then the phone goes back into bootloop (i think bc of flashing it to ics, then jelly bean, and then back to a rooted stock verison), so I have to keep using the rooted stock firmware. Any suggestions? Thank you btw

Sassy.Rainbow.Bong said:
Thank you so much, my phone is working now. I just have to find a way to reset the binary download count(get rid of the yellow triangle) without purchasing a USB jig. Any suggestions? Im trying to update firmware to ICS and then Jelly bean. I tried flashing it to a newer version(ics), but then the phone goes back into bootloop (i think bc of flashing it to ics, then jelly bean, and then back to a rooted stock verison), so I have to keep using the rooted stock firmware. Any suggestions? Thank you btw
Click to expand...
Click to collapse
Getting to download mode is all the USB jig does. U can get it with out one. I believe if u hold down volume and plug in cable. Its something like that I forget. And a return to stock using heimdall or Odin should fix anything
Sent from my Galaxy Nexus using xda premium

im having troubles too!!
i have a similar problem myself. I rooted my infuse it has cwm9 and ics. but for some reason the phone cuts off and starts boot looping. i cant get it in download mode or recovery. took the battery out put it back in and its starts doing it without touching the power button. ive beat and banged on it still nothing but the loop. this is the longest it has done it, usually it would quit after a few minutes but its going on 24 hours now. any help would be awesome!!!

Try holding the volume up and the volume down (but not the power button) with the USB plug already in the phone and hooked up to the computer and then insert the battery. If you don't get into download then you either need a jig or have a power button problem.
Sent from my SGH-I997 using xda premium

psal217050 said:
Try holding the volume up and the volume down (but not the power button) with the USB plug already in the phone and hooked up to the computer and then insert the battery. If you don't get into download then you either need a jig or have a power button problem.
Sent from my SGH-I997 using xda premium
Click to expand...
Click to collapse
i tried the method you just described and its a no go. where do i get a jig? i didnt have this issue till after i rooted and updated so i wanna rule out power button at the moment and try the jig

Ebay is where I got one.
Sent from my SGH-I997 using xda premium

Can get into download mode,
I am able to get into download mode, Ive flashed the OS a number of times back to stalk, then tried ICS, and jelly bean, and I still get the same error message I got at the beginning of this post. But I was able to reset the Binary counter, if I could get my phone to work again I would literally pay somebody to help me....I know it is possible to get it back up and running, it's just a complicated process it seems. Help please!

Chainfire had a program called Triangle Away. Do a search but be careful, it might not work with Infuse and you could get a real brick.
Sent from my SGH-I997 using xda premium

i have bricked my infuse many times, and xda members always have been helpful to me
i am now that the point of believing that my infuse is un-brick-able, so I am writing down my instruction as a noob for you
A/ Preparation in your computer:
1. Install/Update Java (http://java.com/en/download/index.jsp) and Get the driver for the Samsung ready (download and install Kies software at http://www.samsung.com/us/support/owners/product/SGH-I997ZKAATT)
2. download Heimdall One-Click Back-To-Stock UCKJ4 + Easy CWM install at http://forum.xda-developers.com/showthread.php?t=1331381 (maybe put it right there in the desktop)
3. Download SGH_I997 Entropy 4_4_2012-One-Click-Heimdall.jar (maybe put it right there in the desktop)
4. Download: CM-9-20120620 from here http://forum.xda-developers.com/showthread.php?t=1601844
5. Download: CWM-community-kernel from here http://forum.xda-developers.com/showthread.php?t=1119598
6. Download a rom and gapps ( i use the AvatarROM and Gapps from here http://forum.xda-developers.com/showthread.php?t=2174227)
*connect your phone to the computer and copy and paste the 4, 5, 6 items into your sd card
* i am not so sure where you are at, but maybe you don't need flash the cm-9
what you need to do:
a. pull out the battery, put it back on, holding down both the volume buttons while plug in the use cord, the other end of the usb already plug in the computer, that would put you to the download mode
b. by now your computer would be noticing the phone is connected, you then click the Heimdall at 2 above to turn it on (read that thread so you can know what to expect) if you have the drive and the phone is really connected, then, you can click "flash" and the Heimdall will do it job - don't do anything the phone will be rebooting itself back to stock (in the thread, the dev. said you might need to flash two times, but in my case, I only did once and it worked right away)
c. be happy with result for a while, then you put the phone back to download mode and flash the Entropy Heimdall at 3 above, your phone will get the red recovery if things go the way it should
d. then you wipe everything (maybe no need but whatever... after bricking your phone, it doesn't hurt to spend a min. to do this), 2 wipes at the main red recovery and then go to advance and wipe advik catch and battery state .. i would do every wipe 2 times ... and also select the "fix permissions" in there too
e. then you flash the cwm community kernel at (5) assuming that you already put it in the sd card of your phone (if not, then you choose the option from the the red recovery "connect as usb drive, your computer wil read the phone and allow you to copy and paste - i must say here that I tried this step a few times in order to make it work, i even reboot my computer)
then you flash the ROM and Gapps that you want to (assuming that you already put them in the sd card of the phone)
if jellybean didn't go through then maybe you should try the cm-9 first ...
be patient, very patient if things to the way it should, your phone will reboot a few times and recovery will change its color ... and you will get to the ROM you want
while you are waiting for those reboots, take time to read at least the first 3 pages of the threads that I put the links above to learn about the problems and what to expect
don't panic very much it will led to bad decision
your phone will be fine as XDA dev. have spent a great deal of time, energy, thoughts on the infuse
once again, hope you understand my noob instruction and esl writing
you phone will be working again

Thanks but I didn't needed these. I may not be a pro but definitely not a noob. I was only responding to the previous comment.
Sent from my SGH-I997 using xda premium

opps, i didn't see that I accidentally quoted you
sorry

NP.
Sent from my SGH-I997 using xda premium

[Q] lost recovery screen

Basically, i was in the process of rooting the device. I have 4.0.4. So, I am able to run Odin, with it showing "success" on the screen. I unchecked auto reboot. So, I unplugged the USB, and when I try to reboot into recovery, I get nothing, just a black screen. The samsung logo screen will come on and then go away. I hold volume down and power button, and then let go of power button. Prior to running Odin, I was able to see the stock recovery screen. But now, I can't get to any recovery screen. But the phone will boot up no problem, and I can get to the download screen no problem as well. I am not sure what to do next. Can anyone help me or does anyone have any ideas what I may be doing wrong? Thank you.

rosebud1 said:
Basically, i was in the process of rooting the device. I have 4.0.4. So, I am able to run Odin, with it showing "success" on the screen. I unchecked auto reboot. So, I unplugged the USB, and when I try to reboot into recovery, I get nothing, just a black screen. The samsung logo screen will come on and then go away. I hold volume down and power button, and then let go of power button. Prior to running Odin, I was able to see the stock recovery screen. But now, I can't get to any recovery screen. But the phone will boot up no problem, and I can get to the download screen no problem as well. I am not sure what to do next. Can anyone help me or does anyone have any ideas what I may be doing wrong? Thank you.
Click to expand...
Click to collapse
brother try flashing cwm again
also there are many other recoveries you can try them if available
also there are many backup apps [although i cant remember} which have feature of booting into recovery so find and try them
good luck:good::good:

I tried flashing through Odin about 5 times. It says 5. For custom binary downloads... but when I reboot, I just cant get it into recovery. After flashing through odin, and odin says complete, I unplug tablet and try to reboot into recovery, and I get nothing. It almost seems like its going to work but it doesnt. Also, I cant even update the system upgrade.... im guessing since I cant get to recovery screen, neither can the devixe when it tried to update. I'm lost at what to tey next....

Are you positive you flashed a recovery that is designed for your Tab?

Oh nice idea... I used the files in the how to post in the dev section. But I couldnt. Find the 4.93 tar file so I downloaded it somewhere else. It may have been bad I guess? Like I said, everything worked until I had to reboot to recovery. Does anybody have the. Philz touch4.93 tar file? Thank youguys for your help. I appreciate it so much. None of my friends are into this stuff, so you guys are all I got. Lol.

I tried starting over from the beginning of the steps but nothing works. I just get the same result. Does anybody have any ideas of what I am doing wrong or any suggestions? Thank you for your help in advance.

rosebud1 said:
I tried starting over from the beginning of the steps but nothing works. I just get the same result. Does anybody have any ideas of what I am doing wrong or any suggestions? Thank you for your help in advance.
Click to expand...
Click to collapse
Witch tutorial and sources did you use ?

http://forum.xda-developers.com/showthread.php?t=1657056
I used the tutorial here in this forum, but the sources of the files I downloaded from were wherever I could find them as and of the links in this thread no longer contained the files. Do you have a different tutorial to follow? Thank you for your response and help.
Sent from my LG-E980 using xda app-developers app

rosebud1 said:
http://forum.xda-developers.com/showthread.php?t=1657056
I used the tutorial here in this forum, but the sources of the files I downloaded from were wherever I could find them as and of the links in this thread no longer contained the files. Do you have a different tutorial to follow? Thank you for your response and help.
Sent from my LG-E980 using xda app-developers app
Click to expand...
Click to collapse
So you got two problems.
One is the los of your recovery en two is the root.
I alway's use the cwm recovery.
and for root is use CF-Auto-Root-espresso
Btw what tab are you on, P5100 P5110 or ??????
That could make a diverance.
Link to Cwm
http://forum.xda-developers.com/showthread.php?t=2268785
For the root
http://forum.xda-developers.com/showthread.php?t=1980683
http://autoroot.chainfire.eu/

Did you check the MD5 hash for your CWM zip? If it is incomplete it doesn't stand much of a chance at working. On Windows I use winmd5free, and on the tablet I use MD5 Hash (Free, No Ads) from the Google Playstore to verify the MD5 of anything I download before flashing it.
Personally I've used the unofficial TeamWin Recovery 2.6.3.0 zip (TWRP) on my P5113 to install CM 10.2 from the Nightly builds.
Also, verify your device is really rooted. I used RootValidator, again from the Google Playstore, to check after rooting my Tab the first time.

Okay I will try checking md5. Thank you so much. Also, I have sgh i497.... how do I know 5110 vs 5100?
Sent from my SAMSUNG-SGH-I497 using xda app-developers app

rosebud1 said:
Okay I will try checking md5. Thank you so much. Also, I have sgh i497.... how do I know 5110 vs 5100?
Sent from my SAMSUNG-SGH-I497 using xda app-developers app
Click to expand...
Click to collapse
Goto Settings, About tablet (scroll down to the bottom of the settings to find it).
Check out focussoft's directions on how he rooted his sgh-i497. Note he refers to an older version of TWRP Recovery in his instructions.
I used this to root my P5113.
It is easy to confuse the volume rocker switch directions. Remember that the side next to the power button is Volume Down!

P5100 is the one with a simcard ( 3g/phone )
P5110 is the wifi only tablet
P5113 is wifi and Infrared

Okay, I have 3g and wifi on here so I have 5100.
Sent from my SAMSUNG-SGH-I497 using xda app-developers app

Then you got the same as i have, makes it a bit easyer. Any progress by now ?
Sent from my GT-P5100 using Tapatalk

I tried to update my device with the of a, but I think it won't work because I can't access my recovery screen.

And the cwm i tipt you earlyer ?
Sent from my GT-P5100 using Tapatalk

Make sure you have root.
Look up mobile Odin. The lite version is free but make sure you grab the correct kernel flash file for your tablet.
Download the latest cwm/philz/twrp of your choice for your device and use mobile Odin app to flash recovery.
I've occasionally had issues getting into recovery on my 3113 and found that powering off, plugging it in until the battery icon shows then holding power and volume up and quickly unplugging the cable seems to help. Continue holding volume up for about 5 seconds after the black screen shows and it goes into recovery 99% of the time.
I should note that I only have that issue if I flash incompatible rom and kernel combos or wipe my system and accidentally turn the tab off in recovery mode.
Sent from my LGMS500 using XDA Premium 4 mobile app

tokenpoke said:
make sure you grab the correct kernel flash file for your tablet.
Click to expand...
Click to collapse
I got a funny feeling that it wasn't......

Amadeus01 said:
I got a funny feeling that it wasn't......
Click to expand...
Click to collapse
I should have been clearer. The file I specified is for Mobile Odin.
Mobil Odin: http://forum.xda-developers.com/showthread.php?t=1347899
Here's the thread. I'll edit this post in a second with the right recovery.
If you flashed a bad kernel you wouldn't be able to boot past the Samsung screen at all, except to get into download mode. If you can boot to the rom, it's not the wrong kernel. Likely just the wrong recovery or a corrupted recovery download.
Brb, hold tight.
Oh boy... we have a big problem...
I just rececked your model number from your signature....
YOU DO NOT HAVE A 51XX TABLET. DO NOT FLASH 51XX FILES.
What you have is the AT&T 4g model.
Flashing files for any other model can potentially permanent brick your device as all the hardware is completely different.
Let me get back to you again and see if I can find a real recovery option for you.
Ok, here is a good recovery for you. Try this and get back to me.
http://forum.xda-developers.com/showthread.php?t=2228332
Please follow thread directions.
Sent from my LGMS500 using XDA Premium 4 mobile app