Related
Please help me. My Infuse 4G doesn't boot. All I see was light on the button. This what happened. I want to go back to stock and use [ODIN][UCKE3] Return to stock (Updated 06/08/11) by gtg465x . I right click on Odin and run as Admin. Odin see my phone on a download mode. I select infuse.pit on PIT, PDA in Pda, and Phone in Phone. then click Start. It got stuck at factory.fs (don't remember the name actual name). It stuck there for so long, maybe like an hour. Then I decide to unplug and pull battery out. close the Odin and redo the step again. This time the status bar went half way and then got stuck again. I left it overnight just to see if it's actually finish and it never did. Just stuck there. Turn the phone on and i only see light on the button. Is my phone dead? I can still able to get to download mode but the phone won't boot.
I done return to stock so many times and was successful. This was the first encounter I had where Odin stuck and never complete it flashing.
Try things like reinstalling the drivers, another pc, another usb cable etc.
Thanks. Will try that and also i will try this [ODIN][UCKD5] Odin - Stock (100% or Root+3e) - (Update 06/05/11) since on FAQ #4 seem to be in my case. But if members had other recommendation, please post. thx in advance
cat2115 said:
Thanks. Will try that and also i will try this [ODIN][UCKD5] Odin - Stock (100% or Root+3e) - (Update 06/05/11) since on FAQ #4 seem to be in my case. But if members had other recommendation, please post. thx in advance
Click to expand...
Click to collapse
Getting stuck on the factory.fs is pretty common here. You might try charging for a bit to see if you can get it to show signs of life. And that link up there^^^(UCKD5 Stock+Root+3e) has worked for me when gtg's didn't. Read the instructions for it carefully as you don't have to check as many boxes. You only need to load the file into the PDA slot. Also if you didn't have the drivers installed your phone wouldn't show up, so that's not your problem (although you could try re-installing them for **** and giggles)...
If THAT doesn't work try Adam's Heimdall one click HERE
If all else fails try a different PC. I had to and it worked like a charm.
Good Luck
Just my 2ยข
Sent from my SAMSUNG-SGH-I997 using XDA App
I had a similar problem last week I tried on my dads computer, nothing, then went to my computer since my computer had the drivers already on it cuz I used it to put music on my sd card it read it fine and they process went smoothly, so try on a computer that had had it
plugged it in before the problem and if it doesn't find threw phone restart they computer and re put the phone in download mode and try again and keep doing that till it recognizes the phone and it should work then
Sent from my SAMSUNG-SGH-I997 using xda premium
Some times just trying a different USB port on the same computer will help to. Not sure why but on my laptop the USB port on the right my Captivate did not like for flashing but the one on the left side always worked right.
Thank you all for helping me out. My infuse is now back in business. I use [ODIN][UCKD5] Odin - Stock (100% or Root+3e) - (Update 06/05/11) but this one got my phone to always boot in recovery mode no matter what i did. So i decide to try Heimdall One-Click Back-To-Stock UCKJ4 + Easy CWM install [2.3.6] (FOR AT&T USERS) and then flash LinuxBozo's Defuse 1.5 kernel. Successfully flash it . However after using Heimdall One-Click, ODIN did not see my phone when it's in download mode. Besides that, everything went well.
cat2115 said:
Please help me. My Infuse 4G doesn't boot. All I see was light on the button. This what happened. I want to go back to stock and use [ODIN][UCKE3] Return to stock (Updated 06/08/11) by gtg465x . I right click on Odin and run as Admin. Odin see my phone on a download mode. I select infuse.pit on PIT, PDA in Pda, and Phone in Phone. then click Start. It got stuck at factory.fs (don't remember the name actual name). It stuck there for so long, maybe like an hour. Then I decide to unplug and pull battery out. close the Odin and redo the step again. This time the status bar went half way and then got stuck again. I left it overnight just to see if it's actually finish and it never did. Just stuck there. Turn the phone on and i only see light on the button. Is my phone dead? I can still able to get to download mode but the phone won't boot.
I done return to stock so many times and was successful. This was the first encounter I had where Odin stuck and never complete it flashing.
Click to expand...
Click to collapse
I was stuck in Samsung logo. And cannot get into the Download mode. Could you help me with that? Or anyone?
pkayrat said:
I was stuck in Samsung logo. And cannot get into the Download mode. Could you help me with that? Or anyone?
Click to expand...
Click to collapse
What have you tried so far to get in to Download mode?
Sent from my SAMSUNG-SGH-I997 using XDA App
Hey community.
Long time lurker, first time poster.
Anyhow, my brother bricked his infuse last night. Apparently he tried to flash an incompatible cwm fw (Nexus S) and rebooted it, and now its stuck at the samsung logo. Secondly, i tried to push it into download mode and it continues to loop. I tried to connect it to Odin and it does not recongize the phone, however it freezes at a picture of a wheel (similar to windows hourglass) and doesnt move from there.
i'm assuming its perm bricked at this point, unless you have suggestions.
Others have mentioned "jig" and "unbrickable mod" although I could not find any details further than the terms.
Any help would be appreciated.
Just checking, have you tried this?:
Remove the battery, and disconnect USB.
Hold, and continue to hold both volume keys.
Continue to hold vol. keys, connect USB.
Insert battery and continue to hold vol. keys for awhile.
That should put you in download mode.
Sent from my SGH-I997 using Tapatalk 2
After retrying with 4 different cables, 3 different machines, and 2 different O.S. I finally got the infuse to be found by odin.
Thanks for all the help
BaconTelevision said:
After retrying with 4 different cables, 3 different machines, and 2 different O.S. I finally got the infuse to be found by odin.
Thanks for all the help
Click to expand...
Click to collapse
Lol next time try heimdale. It for me anyways works first try all the time. I only use Odin when i have to, other then that i always use heimdale. Make sure when you use heimdale plug your phone into another port. Ive figured out that a usb port only recognizes the phone a certain way, as heimdale uses different drivers that you install. On my laptop i have two ports that i do not usually use (one is dedicated to a bluetooth dongle/mouse) so one is set up for odin, the other for heimdale.
Yeah heimdall is the way to go...don't even need drivers...it uses its own special drivers that it will download for you if you don't already have them
Heimdall never fails me...but Odin...well Odin is kinda iffy
Sent from my SGH-I997 using XDA
Heimdall unbricked me twice
Sent from my SAMSUNG-SGH-I997 using XDA
How ?
10 Ch.
rkkaranrk said:
How ?
10 Ch.
Click to expand...
Click to collapse
How....what do you mean how?
rkkaranrk said:
How ?
10 Ch.
Click to expand...
Click to collapse
You talking to me?
Sent from my SAMSUNG-SGH-I997 using XDA
Oppps i am sorry guys i was posting this somewhere else.
rkkaranrk said:
Oppps i am sorry guys i was posting this somewhere else.
Click to expand...
Click to collapse
Lol that's alright.
Sent from my SAMSUNG-SGH-I997 using XDA
This is how i used the hemidall one click to stock here is what I do, below are how i perform using qkster's method...
The USB + Volume Down + Volume Up Method: Download mode (Noticeable by an Android robot digging with a shovel) is reached by taking everything out (Battery, SIM, MicroSD). plug in the USB cable to your computer and phone then putting in battery at the same time Holding the volume buttons both up and down, (Don't press the power button at all in this method).
How to INSTALL:
1. Put your phone into Download Mode.
2. If you have not used Heimdall, you will need to set up the driver for device recognition.
3. Once your device is connected, the DEVICE STATUS should show: CONNECTED. The long FLASH bar will also turn on for flashing.
4. Click on the FLASH button. (In my opinion: I recommend that you do this in a safe environment. Do not disturb your phone will flashing this firmware. Turn off Antivirus. Do not run any other programs, upload/download/youtube/burning DVD etc)
5. Once it has completed, your phone will reboot. You will hopefully see the ATT logo and reboot into STOCK UCLB3.
6. If it did not work, you will have to put it back into DOWNLOAD mode and reflash a second time, with the FLASH BOOTLOADER box checked. This is more likely if you never had proper Gingerbread bootloaders on your phone, if you are coming from FROYO or if you never had Odin a Gingerbread leak to get your bootloaders.
download this file for your one click to stock...and using above directions...
once that is done and you want to put CWM mod on for flashing a custom ROM, same directions to get in to download mod...
download this file to use the one click to put CWM mod on your phone
here is the link where i took all this...
http://forum.xda-developers.com/showthread.php?t=1524081
Then I flash the dark night ICS rom like the op says and it run nice and smooth no lagg so far or any fc really other than when I put S voice onto my phone.. and like I said that Bluetooth, torch, HD video record is choppy, and no hdmi but I really like I just hope they get the flash light sorted out soon I use it all the time!!! Ya that's how
Sent from my SGH-I997 using xda premium powered by Dark Knight
Kdog71588 said:
This is how i used the hemidall one click to stock here is what I do, below are how i perform using qkster's method...
The USB + Volume Down + Volume Up Method: Download mode (Noticeable by an Android robot digging with a shovel) is reached by taking everything out (Battery, SIM, MicroSD). plug in the USB cable to your computer and phone then putting in battery at the same time Holding the volume buttons both up and down, (Don't press the power button at all in this method).
How to INSTALL:
1. Put your phone into Download Mode.
2. If you have not used Heimdall, you will need to set up the driver for device recognition.
3. Once your device is connected, the DEVICE STATUS should show: CONNECTED. The long FLASH bar will also turn on for flashing.
4. Click on the FLASH button. (In my opinion: I recommend that you do this in a safe environment. Do not disturb your phone will flashing this firmware. Turn off Antivirus. Do not run any other programs, upload/download/youtube/burning DVD etc)
5. Once it has completed, your phone will reboot. You will hopefully see the ATT logo and reboot into STOCK UCLB3.
6. If it did not work, you will have to put it back into DOWNLOAD mode and reflash a second time, with the FLASH BOOTLOADER box checked. This is more likely if you never had proper Gingerbread bootloaders on your phone, if you are coming from FROYO or if you never had Odin a Gingerbread leak to get your bootloaders.
download this file for your one click to stock...and using above directions...
once that is done and you want to put CWM mod on for flashing a custom ROM, same directions to get in to download mod...
download this file to use the one click to put CWM mod on your phone
here is the link where i took all this...
http://forum.xda-developers.com/showthread.php?t=1524081
Then I flash the dark night ICS rom like the op says and it run nice and smooth no lagg so far or any fc really other than when I put S voice onto my phone.. and like I said that Bluetooth, torch, HD video record is choppy, and no hdmi but I really like I just hope they get the flash light sorted out soon I use it all the time!!! Ya that's how
Sent from my SGH-I997 using xda premium powered by Dark Knight
Click to expand...
Click to collapse
That's the method I used too.
Sent from my SAMSUNG-SGH-I997 using XDA
BaconTelevision said:
Hey community.
Long time lurker, first time poster. Anyhow, my brother bricked his infuse last night. Apparently he tried to flash an incompatible cwm fw (Nexus S) and rebooted it, and now its stuck at the samsung logo. Secondly, i tried to push it into download mode and it continues to loop. I tried to connect it to Odin and it does not recongize the phone, however it freezes at a picture of a wheel (similar to windows hourglass) and doesnt move from there. i'm assuming its perm bricked at this point, unless you have suggestions. Others have mentioned "jig" and "unbrickable mod" although I could not find any details further than the terms. Any help would be appreciated.
Click to expand...
Click to collapse
ok I lost my self here...Bacon...did you resolve your issues...??
bigjoe2675 said:
ok I lost my self here...Bacon...did you resolve your issues...??
Click to expand...
Click to collapse
I don't think he did
Sent from my SAMSUNG-SGH-I997 using XDA
samsung i997 bootloop no bootloader solution
Dear guys i'm not saying this will be everybody's case but in my shop we got two of this phones with the issue mentioned above, in the two cases the issue was caused by faulty power button, so before you format or flash your samsung i997 i'll advice to go to youtube search for a diassemble video for your phone take out the main board and with your tester verify that your power button is working properly. If not try to replace the power button. i have soved the two cases that way.
So i did my best to do my own research and downloaded all the files listed in [HOW-TO] Unbrick your soft bricked Galaxy S III on this forum and i haven't gotten very far. The phone will only get up to the splash screen and goes nowhere from there. I plug it in and it recognizes the phone and loads drivers and when i open ODIN 3 it detects it under the ID:COM port. But when i try and flash the "VARALEC.bootchain.tar.MD5" file it goes from "file analysis " to "setup connection" then stops. Any advice or help please?
boot screen, sorry.
Judging from your post, you're not in download mode. Anytime you use Odin, your phone must be in download mode:
1) Turn your phone off completely
2) Hold Power button, Volume Down, and Home until the phone boots on and vibrates
3) Now you're in Download mode
Sent from my SCH-I535 using xda app-developers app
SlimSnoopOS said:
Judging from your post, you're not in download mode. Anytime you use Odin, your phone must be in download mode:
1) Turn your phone off completely
2) Hold Power button, Volume Down, and Home until the phone boots on and vibrates
3) Now you're in Download mode
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
So got past that part and got to the flashing. Flashed the bootloader first which passed then i tried to flash the unzipped Stock.vzw_root66.tar. twice so far it's given me a fail. I downloaded the torrent from scratch each time. Thoughts? Thanks for your help with that first step.
killerbunbun22 said:
So got past that part and got to the flashing. Flashed the bootloader first which passed then i tried to flash the unzipped Stock.vzw_root66.tar. twice so far it's given me a fail. I downloaded the torrent from scratch each time. Thoughts? Thanks for your help with that first step.
Click to expand...
Click to collapse
MD5 sum matches too...
first off why are you flashing a bootchain? that should only be used if your device is truly softbricked...meaning, it will not boot even after flashing back to stock with odin. also try the links in my guide(section 6). flashing the bootchain should only be a last resort because if something goes wrong during flashing, your device could hard brick.
droidstyle said:
first off why are you flashing a bootchain? that should only be used if your device is truly softbricked...meaning, it will not boot even after flashing back to stock with odin. also try the links in my guide(section 6). flashing the bootchain should only be a last resort because if something goes wrong during flashing, your device could hard brick.
Click to expand...
Click to collapse
+1
Sent from my SCH-I535 using xda app-developers app
Thank you for your help and the guide. Made it back to stock safely ... now to wait for the OTA jelly bean update
killerbunbun22 said:
Thank you for your help and the guide. Made it back to stock safely ... now to wait for the OTA jelly bean update
Click to expand...
Click to collapse
See you in February.
Hi there. I had a stock S4g, had froyo 2.2.1. I Rooted the phone. That went fine. I went to install a new kernel (baliSGS4G) The instal got interrupted, second reboot had the android logo flashing while the normal galaxy s logo was on, so I knew from there it was screwed up...
It booted up fine actually, and i was able to operate around in on the phone, altho the home button didnt work... I went ahead and tried a restart to see what it would do and it would stick at the galaxy s boot screen and the voice would say "restore operation" and just reboot and be stuck on a boot loop...
I CANNOT get into recovery mode UNLESS I remove my sdcard... if I do I CAN... BUT it seems as tho the cwm recover is somewhat useless to me now that the sdcard isnt in.... If I boot into recovery and THEN put the card in, it saws E: Can't mount /sdcard..
Ive tried wipe cache partition, wipe data/factory reset... nothing..
Any suggestions? THankyou!
use any one of the "one clicks".
p.s. gb is a better os
Sent from my Nexus 4 using xda premium
sorry, i've very novice, what do you mean by the one clicks? Like a one click flash program or something?
And yeah, I actually have a galaxy SIII.....the reason i grabbed this one out is i have a little go pro style project im going to do with it and dont want to risk breaking my new phone.
I will try the newer os If i can get this fixed.. Hopefully!
Superbeeblaze said:
sorry, i've very novice, what do you mean by the one clicks? Like a one click flash program or something?
And yeah, I actually have a galaxy SIII.....the reason i grabbed this one out is i have a little go pro style project im going to do with it and dont want to risk breaking my new phone.
I will try the newer os If i can get this fixed.. Hopefully!
Click to expand...
Click to collapse
Second link in signature will help.
Ok Lumin, I did what you said and I am getting to the command promt and it is not seeing my phone, It still shows the phone is disconnected... I have CWM recovery, is that an issue?? That opens when i hold the up,down,up button combo, not the stock download mode screen.
Very well written tutorial btw.
[/COLOR]
Superbeeblaze said:
Hi there. I had a stock S4g, had froyo 2.2.1. I Rooted the phone. That went fine. I went to install a new kernel (baliSGS4G) The instal got interrupted, second reboot had the android logo flashing while the normal galaxy s logo was on, so I knew from there it was screwed up...
It booted up fine actually, and i was able to operate around in on the phone, altho the home button didnt work... I went ahead and tried a restart to see what it would do and it would stick at the galaxy s boot screen and the voice would say "restore operation" and just reboot and be stuck on a boot loop...
I CANNOT get into recovery mode UNLESS I remove my sdcard... if I do I CAN... BUT it seems as tho the cwm recover is somewhat useless to me now that the sdcard isnt in.... If I boot into recovery and THEN put the card in, it saws E: Can't mount /sdcard..
Ive tried wipe cache partition, wipe data/factory reset... nothing..
Any suggestions? THankyou!
Click to expand...
Click to collapse
Try One-Click Gremlin Remover to flash and fix. Found this to be easier than Heimdall for the uninitiated: http://forum.xda-developers.com/showthread.php?t=1500427
1 Open Gremlin remover on PC
2. Remove battery from phone
3. Hold down both the Up and Down on the Volume Rocker
4. Plug Phone into USB (without battery)
5. Insert battery into phone and replace cover
The phone should automatically boot into Download mode, and Gremlin Remover should recognize the phone. This should wipe it back to stock but leave it rooted. Then you can start again. I recommend the SGS Kernel Flasher App to flash new kernels in the future. Much less prone to error.
OK its late, i wasnt reading close enough, I was holding the power button too like an idiot... Got it to work, now my phone boots up like new.
Thanks for the help guys.
I can sleep well tonight. :laugh::good:
ariesgodofwar said:
[/COLOR]Try One-Click Gremlin Remover to flash and fix. Found this to be easier than Heimdall for the uninitiated: http://forum.xda-developers.com/showthread.php?t=1500427
1 Open Gremlin remover on PC
2. Remove battery from phone
3. Hold down both the Up and Down on the Volume Rocker
4. Plug Phone into USB (without battery)
5. Insert battery into phone and replace cover
The phone should automatically boot into Download mode, and Gremlin Remover should recognize the phone. This should wipe it back to stock but leave it rooted. Then you can start again. I recommend the SGS Kernel Flasher App to flash new kernels in the future. Much less prone to error.
Click to expand...
Click to collapse
You might refrain from recommending a different flashing utility (ODIN) when somebody has already started using Heimdall and is just asking for help to finish the process. All you are doing is inviting more problems with driver and USB port issues by doing so. You gave him a simple set of instructions that mentioned nothing about drivers.
And SGS Kernel Flasher is great but it only works properly on our GB ROMs.
lumin30 said:
You might refrain from recommending a different flashing utility (ODIN) when somebody has already started using Heimdall and is just asking for help to finish the process. All you are doing is inviting more problems with driver and USB port issues by doing so. You gave him a simple set of instructions that mentioned nothing about drivers.
And SGS Kernel Flasher is great but it only works properly on our GB ROMs.
Click to expand...
Click to collapse
Oops! Wasn't me.
Sent from my SGH-T959V using xda premium
I updated the phones ROM and rooted it perfectly. In the process of the newest rom update, while in Clockword recovery mode - wipe data was accidentally selected, in the middle of the data wipe I tried to save the phone by removing battery. Now its stuck in bootloop, Recovery mode doesn't even come up, but I succeeded in getting the phone into Download Mode, but it has the Triangle up with CUSTOM BINARY DOWNLOAD: YES(2 COUNTS) and CURRENT BINARY :CUSTOM. I have used Odin to try to install the Stock Att version, still no luck. as of now the phone is bricked, and can only get it into download mode. Can somebody please help? Ill die if I can't fix this phone, and Just so you know, I don't have a USB jig to delete the custom binary files. Is that the only way I can get the phone to actually turn on and function? Help plz Im freakin here...
Sassy.Rainbow.Bong said:
I updated the phones ROM and rooted it perfectly. In the process of the newest rom update, while in Clockword recovery mode - wipe data was accidentally selected, in the middle of the data wipe I tried to save the phone by removing battery. Now its stuck in bootloop, Recovery mode doesn't even come up, but I succeeded in getting the phone into Download Mode, but it has the Triangle up with CUSTOM BINARY DOWNLOAD: YES(2 COUNTS) and CURRENT BINARY :CUSTOM. I have used Odin to try to install the Stock Att version, still no luck. as of now the phone is bricked, and can only get it into download mode. Can somebody please help? Ill die if I can't fix this phone, and Just so you know, I don't have a USB jig to delete the custom binary files. Is that the only way I can get the phone to actually turn on and function? Help plz Im freakin here...
Click to expand...
Click to collapse
After flashing to factory rom I get this error message: E:failed to mount /dbdata (File exists)
E:copy_dbdata_media:Can't mount /dbdata your storage not prepared yet, please use UI menu for forma and reboot actions.
Try using heimdall, go to download mode with that triangle.
here is op:
http://forum.xda-developers.com/showthread.php?p=23118134
Here is my upload if u want them:
http://d-h.st/users/bradman117/?fld_id=17853#files
if u don't now what to download here's my 2 links, using heimdall flash stock then flash kernel.
The kernel will give u root and recovery (faster way of rooting )
Sent from my Galaxy Nexus using xda premium
bradman117 said:
Try using heimdall, go to download mode with that triangle.
here is op:
http://forum.xda-developers.com/showthread.php?p=23118134
Here is my upload if u want them:
http://d-h.st/users/bradman117/?fld_id=17853#files
if u don't now what to download here's my 2 links, using heimdall flash stock then flash kernel.
The kernel will give u root and recovery (faster way of rooting )
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Thank you so much, my phone is working now. I just have to find a way to reset the binary download count(get rid of the yellow triangle) without purchasing a USB jig. Any suggestions? Im trying to update firmware to ICS and then Jelly bean. I tried flashing it to a newer version(ics), but then the phone goes back into bootloop (i think bc of flashing it to ics, then jelly bean, and then back to a rooted stock verison), so I have to keep using the rooted stock firmware. Any suggestions? Thank you btw
Sassy.Rainbow.Bong said:
Thank you so much, my phone is working now. I just have to find a way to reset the binary download count(get rid of the yellow triangle) without purchasing a USB jig. Any suggestions? Im trying to update firmware to ICS and then Jelly bean. I tried flashing it to a newer version(ics), but then the phone goes back into bootloop (i think bc of flashing it to ics, then jelly bean, and then back to a rooted stock verison), so I have to keep using the rooted stock firmware. Any suggestions? Thank you btw
Click to expand...
Click to collapse
Getting to download mode is all the USB jig does. U can get it with out one. I believe if u hold down volume and plug in cable. Its something like that I forget. And a return to stock using heimdall or Odin should fix anything
Sent from my Galaxy Nexus using xda premium
im having troubles too!!
i have a similar problem myself. I rooted my infuse it has cwm9 and ics. but for some reason the phone cuts off and starts boot looping. i cant get it in download mode or recovery. took the battery out put it back in and its starts doing it without touching the power button. ive beat and banged on it still nothing but the loop. this is the longest it has done it, usually it would quit after a few minutes but its going on 24 hours now. any help would be awesome!!!
Try holding the volume up and the volume down (but not the power button) with the USB plug already in the phone and hooked up to the computer and then insert the battery. If you don't get into download then you either need a jig or have a power button problem.
Sent from my SGH-I997 using xda premium
psal217050 said:
Try holding the volume up and the volume down (but not the power button) with the USB plug already in the phone and hooked up to the computer and then insert the battery. If you don't get into download then you either need a jig or have a power button problem.
Sent from my SGH-I997 using xda premium
Click to expand...
Click to collapse
i tried the method you just described and its a no go. where do i get a jig? i didnt have this issue till after i rooted and updated so i wanna rule out power button at the moment and try the jig
Ebay is where I got one.
Sent from my SGH-I997 using xda premium
Can get into download mode,
I am able to get into download mode, Ive flashed the OS a number of times back to stalk, then tried ICS, and jelly bean, and I still get the same error message I got at the beginning of this post. But I was able to reset the Binary counter, if I could get my phone to work again I would literally pay somebody to help me....I know it is possible to get it back up and running, it's just a complicated process it seems. Help please!
Chainfire had a program called Triangle Away. Do a search but be careful, it might not work with Infuse and you could get a real brick.
Sent from my SGH-I997 using xda premium
i have bricked my infuse many times, and xda members always have been helpful to me
i am now that the point of believing that my infuse is un-brick-able, so I am writing down my instruction as a noob for you
A/ Preparation in your computer:
1. Install/Update Java (http://java.com/en/download/index.jsp) and Get the driver for the Samsung ready (download and install Kies software at http://www.samsung.com/us/support/owners/product/SGH-I997ZKAATT)
2. download Heimdall One-Click Back-To-Stock UCKJ4 + Easy CWM install at http://forum.xda-developers.com/showthread.php?t=1331381 (maybe put it right there in the desktop)
3. Download SGH_I997 Entropy 4_4_2012-One-Click-Heimdall.jar (maybe put it right there in the desktop)
4. Download: CM-9-20120620 from here http://forum.xda-developers.com/showthread.php?t=1601844
5. Download: CWM-community-kernel from here http://forum.xda-developers.com/showthread.php?t=1119598
6. Download a rom and gapps ( i use the AvatarROM and Gapps from here http://forum.xda-developers.com/showthread.php?t=2174227)
*connect your phone to the computer and copy and paste the 4, 5, 6 items into your sd card
* i am not so sure where you are at, but maybe you don't need flash the cm-9
what you need to do:
a. pull out the battery, put it back on, holding down both the volume buttons while plug in the use cord, the other end of the usb already plug in the computer, that would put you to the download mode
b. by now your computer would be noticing the phone is connected, you then click the Heimdall at 2 above to turn it on (read that thread so you can know what to expect) if you have the drive and the phone is really connected, then, you can click "flash" and the Heimdall will do it job - don't do anything the phone will be rebooting itself back to stock (in the thread, the dev. said you might need to flash two times, but in my case, I only did once and it worked right away)
c. be happy with result for a while, then you put the phone back to download mode and flash the Entropy Heimdall at 3 above, your phone will get the red recovery if things go the way it should
d. then you wipe everything (maybe no need but whatever... after bricking your phone, it doesn't hurt to spend a min. to do this), 2 wipes at the main red recovery and then go to advance and wipe advik catch and battery state .. i would do every wipe 2 times ... and also select the "fix permissions" in there too
e. then you flash the cwm community kernel at (5) assuming that you already put it in the sd card of your phone (if not, then you choose the option from the the red recovery "connect as usb drive, your computer wil read the phone and allow you to copy and paste - i must say here that I tried this step a few times in order to make it work, i even reboot my computer)
then you flash the ROM and Gapps that you want to (assuming that you already put them in the sd card of the phone)
if jellybean didn't go through then maybe you should try the cm-9 first ...
be patient, very patient if things to the way it should, your phone will reboot a few times and recovery will change its color ... and you will get to the ROM you want
while you are waiting for those reboots, take time to read at least the first 3 pages of the threads that I put the links above to learn about the problems and what to expect
don't panic very much it will led to bad decision
your phone will be fine as XDA dev. have spent a great deal of time, energy, thoughts on the infuse
once again, hope you understand my noob instruction and esl writing
you phone will be working again
Thanks but I didn't needed these. I may not be a pro but definitely not a noob. I was only responding to the previous comment.
Sent from my SGH-I997 using xda premium
opps, i didn't see that I accidentally quoted you
sorry
NP.
Sent from my SGH-I997 using xda premium