Related
Just got the battery warning so I plugged it in and to my surprise nothing happened ... checked the plug, restarted.. it just won't charge . When I turn screen off and plug it in the screen turns on but it doesn't charge .. is it busted?
Sent from my Nexus S using XDA App
Are you plugged into a wall socket? If you are trying to charge through USB from a computer, it won't charge unless in sleep mode. Even then it will charge slowly.
Plugged into a wall socket atm.. iv tried from a computer I don't get a charging icon like I used 2
Sent from my Nexus S using XDA App
My was doing the same,I have try different wall sockets in the house and one work ,so keep trying.
Sent from my HERO200 using XDA App
One works? What how's that lol
Sent from my Nexus S using XDA App
this will sounds bad but.... check the usb connection to the plug, as the way its made you can actully push the usb into the plug the wrong way around....
Tried all plugs don't work and yes its the right way round
Sent from my Nexus S using XDA App
when I plug it into a comp it comes up with the USB stuff like Asus sync .. just not charge..
Sent from my Nexus S using XDA App
Anyone else had this issue
Sent from my Nexus S using XDA App
Just got it from Amazon and I have the same issue and still not able to figure out how to fix it. My Transformer is lying there without charging. Planning to return it to Amazon.
Right I just got mine working... try this pull the plug apart and put it back together now squueze them together as tight as you can and try that. Its working for me now ..
Sent from my Nexus S using XDA App
It just doesn't work. How is the usb cable connected to your adapter? It just gets in both ways.
Can you send me a picture of how the three parts are fit into each other?
its only suppose to go in one way, just like conncting any USB devices. But tried that, dissemble the adaptor and put them together, it actually happened to me once too, did exactly that and everything fixed. Remember you gotta squeeze pretty hard to put the two pieces together.
Thanks guys, its working. But this is ridiculous, you have to do a dumbbell roll to fix battery plug
i cant get it too charge and i just got it in the mail. why the hell it even come with this wack ass plug in the first place. what a horrible first impression!
I suggest you dont even use it, its dangerous. Mine melted the first day I got it. I went to bestbuy and got a replacement that works great. It charges at 11 volts/1.5 amps
http://www.bestbuy.com/site/Dynex&#...d=9462949&st=dynex ultimate charger&cp=1&lp=1
italia0101 said:
Right I just got mine working... try this pull the plug apart and put it back together now squueze them together as tight as you can and try that. Its working for me now ..
Sent from my Nexus S using XDA App
Click to expand...
Click to collapse
Yes, I had this problem with mine too.
It seems to be a common issue:
http://forum.xda-developers.com/showthread.php?t=1075475
D_Czap said:
I suggest you dont even use it, its dangerous. Mine melted the first day I got it. I went to bestbuy and got a replacement that works great. It charges at 11 volts/1.5 amps
http://www.bestbuy.com/site/Dynex&#...d=9462949&st=dynex ultimate charger&cp=1&lp=1
Click to expand...
Click to collapse
This seriously works?
I just hope the voltage is right... I've tried different adapters for my phone and then my phone started acting weird (like it didn't take calls and would freeze at times). Replaced the adapter and it returned to normal again.
My TF adapter also gets really hot when charging.
Thanks for the recommendation.
I put some petroleum jelly on the metal prongs and smashed it on the counter a few times AFTER snapping it in.
Unfortunately I did them at the same time and didn't test in between so i don't know which if either or possibly both fixed it but mine is finally ****ing charging.
What a headache. I'm really bothered by ASUS for issuing such a faulty component.
I'm probably going to pick up that dynex tomorrow, because I just KNOW this will break again and mysteriously lodge itself into my drywall.
I just had the problem and discovered that the 5 forward pins on the power adapter are apparently quite easily deformed.
The charger is dual output, 5v and 15v.They use a USB3 connector, with the 15v quick charge output on those pins. I expect that they use the old USB 2 pins behind them to supply 5v for a slow charge, and PC data/charge connection.
Just prior to this, I had tried using an extension USB3 cable on it, so that I could use it while charging, and I suspect that was just enough to deform a couple of the 5 pins in the charger, and I got no charge at all from it, even after putting it back to normal. After an hour, the charger was still cold, and no indication of charging on either the tablet or with the table and keyboard attached.
With a good light and strong magnifier, I could see that a couple of the pins (of the 5 in the front) looked a bit recessed compared to the others, and carefully used the tip of a very fine needle to lift all of them just slightly. Having done that, the charger came to life when I plugged it back in, and the TF is indicating that it is charging.
I don't know how solid or permanent the fix will be, but it is working for me now.
wtf...
tablet wasnt charging. The charger was plugged into the outlet with the usb cable connected.
i noticed my tablet was dead and when i go to charge it, i feel the cable is hot..
then notice rubber/plastic casing that covers the pin connection, is melted.
(the part with ASUS name)
not sure where to see the model number. i just smelled it and its not good... fawk
I wonder if they got the same company as apple to make the proprietry cables lmao
But seriously thats not cool send the pics to asus they will probably send you a new one and a cover or something to keep you happy
Sent from my tf101 using xda premium 1.59Ghz
Why is the wires exposed? Modified connector?
34Ford said:
Why is the wires exposed? Modified connector?
Click to expand...
Click to collapse
Look at the insulation around the wire it is also burnt not modified
Sent from my tf101 using xda premium 1.59Ghz
wow , mine become very hot too , i always disconnect the wall charger because of this
Contact ASUS, send them pics. Do Not send them the unit yet. If they don't replace it immediately, send it to UL Labs.
Asus tech support have the tendency to not think at all and just declare your warranty voided because the outside is melted or whatever. They always claim it's a sign you tamper with it.
i9apps said:
wow , mine become very hot too , i always disconnect the wall charger because of this
Click to expand...
Click to collapse
i have to do so as well
With the history ASUS has with AC power adapters we all need to keep a watchful eye on our adapters. It appears they maybe under built. Meaning the components used in their construction are not big enough to handle the load.
Maybe we need to follow DEVCAKE's thread and build an AC adapter?
hshoem1
By the way my adapter died yesterday.
I've never noticed anything with my TF's charger (I just worry about the cable getting damaged at the docking connector), but now that you metion that...did notice that my Eee PC's charger always did get awefully hot at the brick :-S
So i called yesterday after i got lost in that crap website. most links would end up dead.
The rep gave me an RMA number and emailed me instructions.
I sent them an email with the pic. THanks for the suggestion. Hopefully i can get something resolved.
For now...i cant even charge the damn thing.
I know this is almost a month old since the last post, but curious to know, did they give you any push back or require the old 1 back?
Same here. My Asus charger is very very hot. I need to emphasize the very because its really very hot.
These chargers are very cheap. Running hot is a known issue and if it quits working put it in a ziplock bag and put it in the freezer for 30 minutes. Sounds stupid but it will reset the overload switch in the charger. I've done it. I also don't keep my tab on the charger all the time.
Sent from my Transformer TF101 using xda premium
Ever since I got my first asus product, (eee pc 2Gig surf) I have had charger issues. They always make them very flimsy. My transformers charger gets extremely hot as well. My grandpa owns a viewsonic gTab and the charger for that doesn't burst into flames like mine when he charges it. Thanks for the pictures, I won't leave it plugged in when its not charging anymore.
Sent from my HERO200 using XDA App
thebadfrog said:
These chargers are very cheap. Running hot is a known issue and if it quits working put it in a ziplock bag and put it in the freezer for 30 minutes. Sounds stupid but it will reset the overload switch in the charger. I've done it. I also don't keep my tab on the charger all the time.
Sent from my Transformer TF101 using xda premium
Click to expand...
Click to collapse
I had to do something like this with my ASUS netbook. It had an indicator light on it that would randomly stop working because it got too hot. Had to unplug it for up to an hour to get it to work again. On that note anyone know of any third party transformer chargers that work better/less hot?
gdeeble said:
I know this is almost a month old since the last post, but curious to know, did they give you any push back or require the old 1 back?
Click to expand...
Click to collapse
I sent them the damages unit and they sent me a new one. Rep didn't ask any questions after I explained why I needed an RMA number
turbulent28 said:
I sent them the damages unit and they sent me a new one. Rep didn't ask any questions after I explained why I needed an RMA number
Click to expand...
Click to collapse
Did you include the socket adapter (UK/usa/europe plugs)? Or just the bare adapter...
Have to send it in as well (getting it picked up tomorrow) and wondering whether or not to include the plugs/adapter.
i love how asus charges $50 for this overheqting piece of **** charger. if they are going to pull an Apple on pricing then the quality better be top notch
Mine died to (I don't really know from what but i'm guessing from overheating or some low quality issue), and I found a perfectly fine 12v output AC adaptater with USB port for 10$ in a supermarket. It's a little heavier but have a much longer cable and doesn't threaten to burn my house during the night.
But loosing the USB cable itself must be anoying.
Hi All
I was given this MT4GS about three months ago by a friend. All of the sudden it stopped taking a charge. At first, if i held the charger the right way, it might get a little charge, but now I'm getting nothing. So, I'm alternating between a couple Anker batteries and one stock, hoping someone has had this repaired (and that it wont' cost me a ton of money). Did anyone else have this problem?
Thanks
that sounds more like a usb cable problem than charger port... have you tried other usb cables?
my chargers go bad in about 4 months...I noticed they get really loose in my device. I got this cable and it still works (its been around 6 months) http://www.amazon.com/gp/product/B004GF8TIK/ref=oh_details_o02_s00_i00 (this is just the cable, keep the power plug from your stock charger)
xmc wildchild22 said:
my chargers go bad in about 4 months...I noticed they get really loose in my device. I got this cable and it still works (its been around 6 months) http://www.amazon.com/gp/product/B004GF8TIK/ref=oh_details_o02_s00_i00 (this is just the cable, keep the power plug from your stock charger)
Click to expand...
Click to collapse
I thought i was the only one whos charger went dead like that, seems like the 2 hooks go flat after a while
Sent from my HTC MyTouch 4G Slide using Tapatalk 2
That's the one bad thing about micro usb. It's the standard port for all android phones now, but it's very small, and if you're not careful it can break easily
My MT4G Slide recently started to exhibit this problem. The original cable that came with the phone still works perfectly fine. Unfortunately all my other cables have stopped working. I'll order the cable in the thread and hopefully it will work fine.
Kinda annoying cause now my car and bedside chargers are useless.
Almost 99% of the time will be the cable. I had to replace mine 4 times in one year.
Sent from my myTouch_4G_Slide using xda app-developers app
h3ktyk said:
Almost 99% of the time will be the cable. I had to replace mine 4 times in one year.
Click to expand...
Click to collapse
you might check out this video:
http://www.youtube.com/watch?v=yjnXcFG3674
this guy shows how you can use a needle to 'clean out' the port, because sometimes lint gets wedged down in and prevents the cord from making good contact.
And after you've cleaned it out, I would get something like this to prevent it from happening again
http://www.topicovers.com/products/micro-usb-port-cover
Or clean all the lint out of your pockets!
Sent from my myTouch_4G_Slide using xda app-developers app
So yea that cable works okay. Still not perfect though but better than nothing.
I think one of the pins is just bent down and I don't have pliers so small that I could pull them back up. Plus it's hard to see.
Has nothing to do with the cable. All with the port. The cables all work perfectly fine on other devices.
I have an A100 that was given to me by a friend. It works fine when plugged into the charger. It says "battery status unknown" in system settings and when I unplug it it dies of course. My friend says that their dog chewed the charger cord so they put it away in the closet for about a hear and recently bought a new charger. This issue has been a problem ever sense. I'm thinking that the charging circuit may have been fried. I'm not sure however if the charging circuit is built into the battery or the main board. I can order a battery for around $50 but I don't want to spend it if it isn't going to fix the issue. I tried to OTA to ICS but it won't start the install without a battery charge at least 30%. I plan on breaking out my trusty multi-meter later today and testing some voltages at teatbpoints in the mainboard. Any other ideas? Has anyone else experienced this issue??
Sent from my XT907 using Tapatalk 2
tintguy said:
I have an A100 that was given to me by a friend. It works fine when plugged into the charger. It says "battery status unknown" in system settings and when I unplug it it dies of course. My friend says that their dog chewed the charger cord so they put it away in the closet for about a hear and recently bought a new charger. This issue has been a problem ever sense. I'm thinking that the charging circuit may have been fried. I'm not sure however if the charging circuit is built into the battery or the main board. I can order a battery for around $50 but I don't want to spend it if it isn't going to fix the issue. I tried to OTA to ICS but it won't start the install without a battery charge at least 30%. I plan on breaking out my trusty multi-meter later today and testing some voltages at teatbpoints in the mainboard. Any other ideas? Has anyone else experienced this issue??
Sent from my XT907 using Tapatalk 2
Click to expand...
Click to collapse
My A100 does the same thing. It started after I replaced the LCD. I replaced the battery with one from eBay, but it made no difference. The charge may have run down while I was waiting on the LCD, but I don't know for. As far the eBay battery, who knows about that. It could be charging circuit, since two batteries did the same thing. But, now that I think about it, the original showed 3% charge for a while which enabled me to move to another spot and plug it back in.
sham63 said:
My A100 does the same thing. It started after I replaced the LCD. I replaced the battery with one from eBay, but it made no difference. The charge may have run down while I was waiting on the LCD, but I don't know for. As far the eBay battery, who knows about that. It could be charging circuit, since two batteries did the same thing. But, now that I think about it, the original showed 3% charge for a while which enabled me to move to another spot and plug it back in.
Click to expand...
Click to collapse
Wish I could get ahold of a circuit schematic for this thing.....I would construct another charging circuit.
Sent from my XT907 using Tapatalk 2
good luck
tintguy said:
Wish I could get ahold of a circuit schematic for this thing.....I would construct another charging circuit.
Sent from my XT907 using Tapatalk 2
Click to expand...
Click to collapse
good :good:
Mine did that a while ago, when still under warranty. Sent to Acer, they fixed that charging circuit. Apparently a common problem. I suspect a regulator chip, but it's a guess.
Sent from my SPH-L900 using XDA Premium 4 mobile app
gbarr119 said:
Mine did that a while ago, when still under warranty. Sent to Acer, they fixed that charging circuit. Apparently a common problem. I suspect a regulator chip, but it's a guess.
Sent from my SPH-L900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
You could honestly just charge the battery sepretly, and I bet it'd work. You could even, if you're talented enough, strap a bigger battery to it and be able to use it for days.
Sent from my SPH-L710 using XDA Premium 4 mobile app
With my A100 not even recognizing that the battery is plugged in, I doubt charging it separately would make a difference. I just want it to "think" the battery is there and charged to at least 30% so I can apply a few OTA updates and acquire root. I don't mind having to use it while on AC power only. I have a Galaxy Tab 2 that I can carry around.
Sent from my One X using Tapatalk
Hi,
I have had my phone since August 2012. Starting the other day my micro usb port on my S3 is starting to get really picky as to how it must be positioned to charge. I have tried atleast 4 different cables, all doing the same thing. I know its just a matter of time before it stops charging all together...
My question is
A)Is the micro USB replaceable (I have no soldering experience)
B)Should I replace the whole motherboard
C)Should I look for a new phone (I can use my brothers upgrade.... but only as last resort)
What are your thoughts?
Thanks!
You under warenty?
Sent from my SCH-I535 using Tapatalk
markdapimp said:
You under warenty?
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
No
My question is have you checked YouTube
Sent from my SCH-I535 using Tapatalk
markdapimp said:
My question is have you checked YouTube
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
I see videos for replacing just the usb part ON the motherboard, some people solder (like I said, I never soldered before)
AND there are some 'unprofessional' looking videos where people use a heat gun (which I have) to just replace it.
As for the motherboard replacement, there are good complete disassemblies of the S3, and some boards can be found on ebay
but for $130...
Well you should be careful charging your phone next time perhaps when you get a new device don't let the charger yank down on the port itself
Sent from my SCH-I535 using Tapatalk
you could always invest in wireless charging! Then you wouldnt have to deal with it! Could be a good alternative!
I found this:
http://www.amazon.com/SainSonic-Standard-Wireless-Charger-Receiver/dp/B00C3DKSRM?tag=notebookscom-20
and then you can just buy a wireless charger and boom no more worrying about the microusb port!
Labarr1532 said:
Hi,
I have had my phone since August 2012. Starting the other day my micro usb port on my S3 is starting to get really picky as to how it must be positioned to charge. I have tried atleast 4 different cables, all doing the same thing. I know its just a matter of time before it stops charging all together...
My question is
A)Is the micro USB replaceable (I have no soldering experience)
B)Should I replace the whole motherboard
C)Should I look for a new phone (I can use my brothers upgrade.... but only as last resort)
What are your thoughts?
Thanks!
Click to expand...
Click to collapse
You could also buy a spare battery and one if those wall charger that you put the battery in (like that come with the zero lemon 2300 slims). You essentially charge the battery outside the phone, then just pop the charged battery in (no touching charging port on your phone). I think they're like 20 something bucks on Amazon and come with that wall charger thing.
Sent from my SCH-I535 using xda app-developers app
replace the usb or the battery
DiSiD said:
You could also buy a spare battery and one if those wall charger that you put the battery in (like that come with the zero lemon 2300 slims). You essentially charge the battery outside the phone, then just pop the charged battery in (no touching charging port on your phone). I think they're like 20 something bucks on Amazon and come with that wall charger thing.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
I actually already had a external battery charger for my phone! I completely forgot I had it hahah!! I'll use this method until I can get an upgrade in August. Thanks everyone for your help