I am using Galaxy Y S5360 and also my phone is rooted. After some fooling around in the new rooted device i guess i bricked it.
I had installed supersu and also different kernel version and also the creed custom rom. After some unknown things i landed up booting my phone where the screen just shows the Samsung galaxy y young written and nothing. I tried getting into recovery mode but with no success. I tried flashing a stock rom via odin but its also says failed.
Here is the code
Code:
<ID:0/019> Added!!
<ID:0/019> Odin v.3 engine (ID:19)..
<ID:0/019> File analysis..
<ID:0/019> SetupConnection..
<ID:0/019> Initialzation..
<ID:0/019> Get PIT for mapping..
<ID:0/019> Firmware update start..
<ID:0/019> boot.img
<ID:0/019> NAND Write Start!!
<ID:0/019>
<ID:0/019> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i am using firmware provided here. S5360_DDLA3_ODDLA2_DDLA2 (revision 1)
I am unable to get into the recovery mode. Holding the power up key and the home button key with power key just brings the galaxy y written in black screen and nothing else. In download mode previously it was Current Bin: Custom rom but now its Samsung official. And the custom bin down : yes(1 counts) is showing.
Please help me. How to get my phone back?
or which pit or csc or other files to be used with the pda?
or what shall i do to make my phone work again.
please help me.
Related
Hi,
I have bought new phone galaxy s2 GT-I9100G and broken it
I have been trying for 2 days now to fix it, read more than 100 articles/forums but still can't do ....
What I have now is:
1. when powering on, can't go to recovery mode, also download is not there (just a picture of computer and phone with cable)
2. With ODIN I can repartition (get ok)
3. I can download with ODIN Kernels
4. But when I update firmware from SamMobile it is doing all the way and then always FAIL (tried more than 5 versions of firmwares)
I get this on ODIN:
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> cache.img
<ID:0/011> NAND Write Start!!
<ID:0/011> factoryfs.img
<ID:0/011> MLO
<ID:0/011>
<ID:0/011> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1
Can someone please help?
Thanks,
Roee
Search for someone with JTAG. I think is the best solution for you now.
roeebloch said:
Hi,
I have bought new phone galaxy s2 GT-I9100G and broken it
I have been trying for 2 days now to fix it, read more than 100 articles/forums but still can't do ....
What I have now is:
1. when powering on, can't go to recovery mode, also download is not there (just a picture of computer and phone with cable)
2. With ODIN I can repartition (get ok)
3. I can download with ODIN Kernels
4. But when I update firmware from SamMobile it is doing all the way and then always FAIL (tried more than 5 versions of firmwares)
I get this on ODIN:
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> cache.img
<ID:0/011> NAND Write Start!!
<ID:0/011> factoryfs.img
<ID:0/011> MLO
<ID:0/011>
<ID:0/011> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1
Can someone please help?
Thanks,
Roee
Click to expand...
Click to collapse
Try this >>http://forum.xda-developers.com/showthread.php?t=1448765<<, works for me...
I9100G
hi
get an I9100g PID
check repartition
choose your PDA .tar file
flash your phone
you need a good PID for i9100g
The i9100G is NOT the same GSII as the i9100. It has a different processor and CPU (TI-OMAP). Therefore, most of the ROMs won't be compatible.
Hi,
This morning I tried to install the ICS on my Samsung Galaxy S2, model GT-I9100G bought in Germany SIM lock free, but the phone is not working any longer. I follow the instructions published on cnet.co.uk. I cannot type links here since I am new, but if you type in Google the following:
How to install ice cream sandwich on samsung galaxy s2, you will find them in the first link.
I used Odin and the "SetupConnection.." got stuck in the same status for 10 min. Therefore, I decided based on some information on the web to pull the usb cable, pull the battery off and try one more time.
I tried to put the phone into download mode one more time, but it was not possible. The phone was just showing something like the following:
Phone icon ... Warning sign (the yellow triangle with the ! inside) ... Computer
Anyhow, I try to install once again the ICS with Odin, but this is what I got:
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
Suggestions or is the phone brick? Thank you
Trukero
Hi,
An update of the issue with my phone.
I found the [GUIDE] Fix an unflashable or soft bricked GSII on:
http://forum.xda-developers.com/showthread.php?t=1457458
I follow step 5 for "NAND rw coruption", I follow step 5 because I was not able to get to Download Mode. I used Odin to flash the kernel proposed by Phistachio, I9100XXKI3. It seems that it works.
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> zImage
<ID:0/007> RQT_CLOSE !!
<ID:0/007> RES OK !!
<ID:0/007> Removed!!
<ID:0/007> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
After this, it shows a the following: Samsung Galaxy SII GT-I9100G with the yellow warning warning. After this procedure I was able to get into Download Mode. So I proceeded with the thread instructions from steps 1 to 4, using the Recovery Package/ROM proposed Phistachio, I9100XXKI3. However, this time the process did not work.
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> boot.bin
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
What could be the next step?
Thank you,
Trukero
there are a different between GT-I9100G and GT-I9100
so be sure bro ..
yeh maybe rom not for your model i9100g
There isn't any ics ROM for the i9100G so you flashed a i9100 which bricked your phone.you should read in the gs2 section, there's a thread what to do know, just search for it
Jahai said:
There isn't any ics ROM for the i9100G so you flashed a i9100 which bricked your phone.you should read in the gs2 section, there's a thread what to do know, just search for it
Click to expand...
Click to collapse
You can't flash roms from the i9100 because of different chipsets.
Sent from my GT-I9100G using xda premium
Hi everybody.
Thank you for Jahai advice on this thread. I looked deeper into the GS2 forum and I found what he has mentioned and I SOLVED the PROBLEM. My phone is fully operative once again.
Summary:
1.- I Bricked the GT-I9100G since I used a ICS not suitable for my phone. I got the same picture as the website below:
Look in Google under : Repair your bricked Samsung Galaxy S2...
Therefore I was not able to Go in Download Mode.
2.- I used the step 5 from, "NAND rw coruption", proposed by Phistachio, under the following thread:
http://forum.xda-developers.com/show....php?t=1457458
I used the kernel he offered I9100XXKI3. With this procedure, I was able to y get the Download mode again after taking the battery off, and put it back and immediately Volume Down, Home and Power. Only step 5 nothing else.
3.- Then I followed the procedure defined by ToMmY_hun under the thread:
http://forum.xda-developers.com/showthread.php?t=1448765&highlight=9100g
I have used the pit file as well. I tried without it, and I was not able to flash the firmware successfully. For more information about this step look at the thread:
http://forum.xda-developers.com/showthread.php?t=1568756&highlight=9100g
By catanzaro27 at 28th March 2012, 10:54 AM.
4.- The phone is working again.
Hope this help.
FIX FOUND!
I had the SAME PROBLEM ! i also tried ics rom ,btw the pit file was for china model got it fixed by getting correct pit file, i can give the lnk for pit file
,and that warning sign - pc was fixed EASILy by flashing kernel through odin without going to download mode ! its fixed just flash a kernel and its fixed
Hi Friends
I was trying to Root my Samsung GT I9003(Gingerbread v2.3.6) using Odin3 v1.85 (Did all the Download Mode Process, Vol Down + Middle Key + Power Button) and it failed with the below Messages;
<ID:0/008> Removed!!
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> zImage
<ID:0/008> NAND Write Start!!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
When I Removed and Restarted the Phone neither booting nor Entering into Download mode, it is displaying a small icon with a mobile - PC and a Warning symbol in between them (As in the Attached Image), Please suggest how to make it work.
yenkaykiran said:
Hi Friends
I was trying to Root my Samsung GT I9003(Gingerbread v2.3.6) using Odin3 v1.85 (Did all the Download Mode Process, Vol Down + Middle Key + Power Button) and it failed with the below Messages;
<ID:0/008> Removed!!
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> zImage
<ID:0/008> NAND Write Start!!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
When I Removed and Restarted the Phone neither booting nor Entering into Download mode, it is displaying a small icon with a mobile - PC and a Warning symbol in between them (As in the Attached Image), Please suggest how to make it work.
Click to expand...
Click to collapse
remove the battery for a minute then insert it back with holding download mod combo it should work
same problem was happened for me don't worry your phone didn't break!
sorry for my bad english
same topic
i have the same probleme and now i am on the dwonload mode screen; what should i do ? because if i reboot it(long push on the switch button) it gives me the first screen (the pc and the phone ) please help.
yenkaykiran said:
Hi Friends
I was trying to Root my Samsung GT I9003(Gingerbread v2.3.6) using Odin3 v1.85 (Did all the Download Mode Process, Vol Down + Middle Key + Power Button) and it failed with the below Messages;
When I Removed and Restarted the Phone neither booting nor Entering into Download mode, it is displaying a small icon with a mobile - PC and a Warning symbol in between them (As in the Attached Image), Please suggest how to make it work.
Click to expand...
Click to collapse
mehdilio said:
i have the same probleme and now i am on the dwonload mode screen; what should i do ? because if i reboot it(long push on the switch button) it gives me the first screen (the pc and the phone ) please help.
Click to expand...
Click to collapse
Here's how to unbrick it and get in onto the download mode.
After getting it into the download mode, flash KPE
[Q] Stuck in download mode or Samsung Logo
The note was working fine, the battery was empty... then I re-charged it and tried to open it again and it didn't open since! It stuck on Samsung Logo, I tried to get the recovery mode, but couldn't (stuck again on Samsung logo)... Then tried the Download mode and it worked... I got Heimdall and Odin and tried to restore the original stock firmware (4.4.2) or even TWRP for recovery and both didn't work.
Odin every time fail after as follow:
Code:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! All threads completed.
(succeed 0 / failed 1)
I've also tried initialization with keys, but got the following message:
Code:
'GT-N8000' does not support initializing
I used Odin 3.0.7 and Odin 3.10. I was on Stock Firmware (4.4.2) but rooted.
There is no way to fix it. NAND is dead
Only way is change its motherboard.
It happened with me 2 months ago.
I tried to repartition, install stock rom via Odin
It didn't work, I take my note 10.1 to service center
They said They need to change my motherboard
Then I buy a Nexus 9.
Good Experience bro!!!
Sorry for bad english
Hello all. . .
Longtime reader (learner), first time poster. Trying to bring son's GS5 back to life -- it's stuck in boot loop ("Samsung GALAXY S5" splash screen appears, reboots). Unknown cause, not due to any flashes, ROMs, ROOT, etc
All attempts to enter recovery mode (Vol up + PWR + Home) initially successful (get blue text: RECOVERY BOOTING. . . .) then display goes black, repeats. -- never see Recovery screen. Yes, I've cycled power, battery out, wait, etc, etc.
Can successfully enter Download mode, Odin v3.09 recognizes connection, but all attempts to write to memory fail.
GS5 displays:
ODIN MODE:
PRODUCT NAME: SM-G900P
CURRENT BINARY: Samsung Original
SYSTEM STATUS: Official
REACTIVATION LOCK(KK): OFF
KNOX WARRANTY VOID: 0x0
QUALCOMM SECUREBOOT: ENABLE (CSB)
AP SWREV: S1 T3 A1 A3 P1
SECURE DOWNLOAD: ENABLE
UDC START
<press Odin Start button>
Odin displays:
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> aboot.mbn
<ID:0/008> NAND Write Start!!
<ID:0/008> FAIL! (Auth)
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Device display adds line:
SW REV CHECK FAIL : [aboot]Fused 3 > Binary 1
____
Cannot determine build number and original box long gone. I've downloaded a couple firmware zips from sammobile (Sprint CDMA) using files nearest to best guess for purchase date. Is it necessary to match the exact files which originally came installed or should later firmware releases also normally load? In other words, is the fail due to trying a wrong firmware revision?
Any other info I need to include here? Thanx in advance!
flyyboyy
Hi !
I see that you have already posted here https://forum.xda-developers.com/galaxy-s5/help/bootloop-issue-t3563503/post71193444#post71193444 , that`s a better section
Please do mention the specific variant you own , there are some more , it is verry important to flash the exact firmware .
For A-T&T here https://forum.xda-developers.com/at...x-samsung-s5-att-sm-g900a-lollipop-5-t3305497
Good luck !
thread closed