Hi,
I have bought new phone galaxy s2 GT-I9100G and broken it
I have been trying for 2 days now to fix it, read more than 100 articles/forums but still can't do ....
What I have now is:
1. when powering on, can't go to recovery mode, also download is not there (just a picture of computer and phone with cable)
2. With ODIN I can repartition (get ok)
3. I can download with ODIN Kernels
4. But when I update firmware from SamMobile it is doing all the way and then always FAIL (tried more than 5 versions of firmwares)
I get this on ODIN:
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> cache.img
<ID:0/011> NAND Write Start!!
<ID:0/011> factoryfs.img
<ID:0/011> MLO
<ID:0/011>
<ID:0/011> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1
Can someone please help?
Thanks,
Roee
Search for someone with JTAG. I think is the best solution for you now.
roeebloch said:
Hi,
I have bought new phone galaxy s2 GT-I9100G and broken it
I have been trying for 2 days now to fix it, read more than 100 articles/forums but still can't do ....
What I have now is:
1. when powering on, can't go to recovery mode, also download is not there (just a picture of computer and phone with cable)
2. With ODIN I can repartition (get ok)
3. I can download with ODIN Kernels
4. But when I update firmware from SamMobile it is doing all the way and then always FAIL (tried more than 5 versions of firmwares)
I get this on ODIN:
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> cache.img
<ID:0/011> NAND Write Start!!
<ID:0/011> factoryfs.img
<ID:0/011> MLO
<ID:0/011>
<ID:0/011> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1
Can someone please help?
Thanks,
Roee
Click to expand...
Click to collapse
Try this >>http://forum.xda-developers.com/showthread.php?t=1448765<<, works for me...
I9100G
hi
get an I9100g PID
check repartition
choose your PDA .tar file
flash your phone
you need a good PID for i9100g
The i9100G is NOT the same GSII as the i9100. It has a different processor and CPU (TI-OMAP). Therefore, most of the ROMs won't be compatible.
Related
Hi,
This morning I tried to install the ICS on my Samsung Galaxy S2, model GT-I9100G bought in Germany SIM lock free, but the phone is not working any longer. I follow the instructions published on cnet.co.uk. I cannot type links here since I am new, but if you type in Google the following:
How to install ice cream sandwich on samsung galaxy s2, you will find them in the first link.
I used Odin and the "SetupConnection.." got stuck in the same status for 10 min. Therefore, I decided based on some information on the web to pull the usb cable, pull the battery off and try one more time.
I tried to put the phone into download mode one more time, but it was not possible. The phone was just showing something like the following:
Phone icon ... Warning sign (the yellow triangle with the ! inside) ... Computer
Anyhow, I try to install once again the ICS with Odin, but this is what I got:
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
Suggestions or is the phone brick? Thank you
Trukero
Hi,
An update of the issue with my phone.
I found the [GUIDE] Fix an unflashable or soft bricked GSII on:
http://forum.xda-developers.com/showthread.php?t=1457458
I follow step 5 for "NAND rw coruption", I follow step 5 because I was not able to get to Download Mode. I used Odin to flash the kernel proposed by Phistachio, I9100XXKI3. It seems that it works.
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> zImage
<ID:0/007> RQT_CLOSE !!
<ID:0/007> RES OK !!
<ID:0/007> Removed!!
<ID:0/007> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
After this, it shows a the following: Samsung Galaxy SII GT-I9100G with the yellow warning warning. After this procedure I was able to get into Download Mode. So I proceeded with the thread instructions from steps 1 to 4, using the Recovery Package/ROM proposed Phistachio, I9100XXKI3. However, this time the process did not work.
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> boot.bin
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
What could be the next step?
Thank you,
Trukero
there are a different between GT-I9100G and GT-I9100
so be sure bro ..
yeh maybe rom not for your model i9100g
There isn't any ics ROM for the i9100G so you flashed a i9100 which bricked your phone.you should read in the gs2 section, there's a thread what to do know, just search for it
Jahai said:
There isn't any ics ROM for the i9100G so you flashed a i9100 which bricked your phone.you should read in the gs2 section, there's a thread what to do know, just search for it
Click to expand...
Click to collapse
You can't flash roms from the i9100 because of different chipsets.
Sent from my GT-I9100G using xda premium
Hi everybody.
Thank you for Jahai advice on this thread. I looked deeper into the GS2 forum and I found what he has mentioned and I SOLVED the PROBLEM. My phone is fully operative once again.
Summary:
1.- I Bricked the GT-I9100G since I used a ICS not suitable for my phone. I got the same picture as the website below:
Look in Google under : Repair your bricked Samsung Galaxy S2...
Therefore I was not able to Go in Download Mode.
2.- I used the step 5 from, "NAND rw coruption", proposed by Phistachio, under the following thread:
http://forum.xda-developers.com/show....php?t=1457458
I used the kernel he offered I9100XXKI3. With this procedure, I was able to y get the Download mode again after taking the battery off, and put it back and immediately Volume Down, Home and Power. Only step 5 nothing else.
3.- Then I followed the procedure defined by ToMmY_hun under the thread:
http://forum.xda-developers.com/showthread.php?t=1448765&highlight=9100g
I have used the pit file as well. I tried without it, and I was not able to flash the firmware successfully. For more information about this step look at the thread:
http://forum.xda-developers.com/showthread.php?t=1568756&highlight=9100g
By catanzaro27 at 28th March 2012, 10:54 AM.
4.- The phone is working again.
Hope this help.
FIX FOUND!
I had the SAME PROBLEM ! i also tried ics rom ,btw the pit file was for china model got it fixed by getting correct pit file, i can give the lnk for pit file
,and that warning sign - pc was fixed EASILy by flashing kernel through odin without going to download mode ! its fixed just flash a kernel and its fixed
I've soft bricked my Galaxy Note I717 3 times in the last week while trying to update to the Jellybean firmware. Samsung Kies does not work. It says that there was a communication error during the upgrade process, whatever that means. I took it to the ATT store and they revived it within a few minutes with no data loss. This happened twice. I just tried to manually flash the update using odin, but I get this message:
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> amss.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> boot.img
<ID:0/003> cache.img.ext4
<ID:0/003> mdm.bin
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Now I'm stuck in download mode. I tried to flash the Jellybean ROM again, but it stops right there. I'm currently runnin the stock ICS firmware. Any suggestions?
Beastmutt said:
I've soft bricked my Galaxy Note I717 3 times in the last week while trying to update to the Jellybean firmware. Samsung Kies does not work. It says that there was a communication error during the upgrade process, whatever that means. I took it to the ATT store and they revived it within a few minutes with no data loss. This happened twice. I just tried to manually flash the update using odin, but I get this message:
Initialzation..
Get PIT for mapping..
Firmware update start..
amss.bin
NAND Write Start!!
boot.img
cache.img.ext4
mdm.bin
recovery.img
system.img.ext4
Complete(Write) operation failed.
All threads completed. (succeed 0 / failed 1)
Now I'm stuck in download mode. I tried to flash the Jellybean ROM again, but it stops right there. I'm currently runnin the stock ICS firmware. Any suggestions?
Click to expand...
Click to collapse
So what are you flashing exactly and what slot are you placing it in?
Sent from my CLEAN Note ll
MY galaxy note 10.1(gt-n8000) is bricked.so i tried to recover it with odin using firmware,twrp recovery,cwm recovery.
but showing the same problem for all.
it shows fails and done up to NAND WRITE START!!
but i didnt tried with bootlader for my tab version.
i cant find bootloader for galaxy note10.1(gt-n8000) any where.
->can anyone plz try to fix the problem and help me to find bootloader for galaxy note 10.1(gt-n8000).
some are saying that my mother board is crashed..is that real:crying:crying:
Flash stock rom via Odin first .
Post fail message .
I have the same problem.
Might be Nand memory fail, quite a common issue with these 1st. generation GT-N8000's
I have tried several different recovery's and Odin's. Can't figure out the fix.
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> recovery.img
<ID:0/008> NAND Write Start!!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Hi everyone,
This morning i clicked on an app "torque pro" and my phone immediately rebooted itself and got stuck in a constant reboot loop. I couldnt get into stock recovery either. I decided that the only way to bring it back to life would be to flash the stock firmware again via odin.
I have tried for the last 2 hours using different versions of ODIN and Different stock firmwares but i end up getting a write failure everytime around 70% of the way. The log is below:
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1207)..
<ID:0/005> File analysis..
<ID:0/005> Removed!!
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> __XmitData_Write
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
My phone is technically an ATT S8+ but i had flashed the Canadian Bloatfree firmware before. Does anyone have any suggestions how i can fix this. Smart Switch doesnt even have the option to initialize so i cant force it to flash stock back on the phone.
use a official cable(usb) maybe that will work.
Tried a couple of cables as well as the one that came in the box with the phone... same result unfortunately.
saadi107 said:
Hi everyone,
This morning i clicked on an app "torque pro" and my phone immediately rebooted itself and got stuck in a constant reboot loop. I couldnt get into stock recovery either. I decided that the only way to bring it back to life would be to flash the stock firmware again via odin.
I have tried for the last 2 hours using different versions of ODIN and Different stock firmwares but i end up getting a write failure everytime around 70% of the way. The log is below:
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1207)..
<ID:0/005> File analysis..
<ID:0/005> Removed!!
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> __XmitData_Write
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
My phone is technically an ATT S8+ but i had flashed the Canadian Bloatfree firmware before. Does anyone have any suggestions how i can fix this. Smart Switch doesnt even have the option to initialize so i cant force it to flash stock back on the phone.
Click to expand...
Click to collapse
Drivers maybe
Drivers are all good. Since I am in Canada and the phone is AT&T... Samsung Canada wouldn't even check what's wrong with it.
Samsung website showed Ubreakifix in Buffalo as an authorized repair facility and I took it there... Thru weren't able to do anything to the phone either.
Just a little bump...
Samsung Canada is being ridiculous and refusing to service a USA phone
Hey you! Here is your fix
1, load into download mode (bixby volume down, power button)
2, click cancel (volume down)
3, load into download mode again
4, click continue (volume up)
5, flash, no error now! No need to flash another bootloader or etc, just every time you want to flash anything use this trick.
Magnerion said:
Hey you! Here is your fix
1, load into download mode (bixby volume down, power button)
2, click cancel (volume down)
3, load into download mode again
4, click continue (volume up)
5, flash, no error now! No need to flash another bootloader or etc, just every time you want to flash anything use this trick.
Click to expand...
Click to collapse
I have the issue to and I tried this method for a few hours and nothing changed. Flash error in Odin is still there.
I saw this guy doing it in a YouTube video. . Looked like the timing of it was very tricky . . . . Did you see the video ?
hth.
I saw a couple of videos in which the guy goes into download mode again the moment he starts Odin.. I've tried that many times but I end up getting the same error. With that being said in my case the BL anf CS files flash without any problems.
The AP file though goes 70% all the time and then stops at "__XmitData_Write" portion. I wonder if there is anyway to find out what that is.
Try if you can flash TWRP with odin.
If successful, format data and wipe everything.
After that try flashing official firmware.
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1207)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> abl.elf
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
any solution???
Ok so ive been trying to flash twrp so i can flash cyanogen mod on my g930u. Its not rooted and ive used many diffirent cables, laptops, versions of odin to no avail. I downloaded the .tar version of the latest version of twrp for it. usb debugging and oem unlocking are on and frp lock is off. This is the error message i get when trying to flash twrp. Auto reboot is also off. Also tried diffirent pc usb ports. The phone is also in perfect condition and works fine. please help
<ID:0/012> Added!!
<ID:0/012> Removed!!
<ID:0/012> Added!!
<ID:0/012> Odin engine v(ID:3.1301)..
<ID:0/012> File analysis..
<ID:0/012> Total Binary size: 43 M
<ID:0/012> SetupConnection..
<ID:0/012> Initialzation..
<ID:0/012> Get PIT for mapping..
<ID:0/012> Firmware update start..
<ID:0/012> NAND Write Start!!
<ID:0/012> SingleDownload.
<ID:0/012> recovery.img
<ID:0/012> RQT_CLOSE !!
<ID:0/012>
<ID:0/012> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Please help
Varied Gamer said:
Ok so ive been trying to flash twrp so i can flash cyanogen mod on my g930u. Its not rooted and ive used many diffirent cables, laptops, versions of odin to no avail. I downloaded the .tar version of the latest version of twrp for it. usb debugging and oem unlocking are on and frp lock is off. This is the error message i get when trying to flash twrp. Auto reboot is also off. Also tried diffirent pc usb ports. The phone is also in perfect condition and works fine. please help
<ID:0/012> Added!!
<ID:0/012> Removed!!
<ID:0/012> Added!!
<ID:0/012> Odin engine v(ID:3.1301)..
<ID:0/012> File analysis..
<ID:0/012> Total Binary size: 43 M
<ID:0/012> SetupConnection..
<ID:0/012> Initialzation..
<ID:0/012> Get PIT for mapping..
<ID:0/012> Firmware update start..
<ID:0/012> NAND Write Start!!
<ID:0/012> SingleDownload.
<ID:0/012> recovery.img
<ID:0/012> RQT_CLOSE !!
<ID:0/012>
<ID:0/012> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Please help
Click to expand...
Click to collapse
You need to root it first, as in access to root directory. You can't do nothing until you've done that.
cooltt said:
You need to root it first, as in access to root directory. You can't do nothing until you've done that.
Click to expand...
Click to collapse
One of my friends has the same model unrooted and he was able to get it to flash first try and said I don't need root.
Varied Gamer said:
One of my friends has the same model unrooted and he was able to get it to flash first try and said I don't need root.
Click to expand...
Click to collapse
Well get your friend to do it, what do we know.