I've soft bricked my Galaxy Note I717 3 times in the last week while trying to update to the Jellybean firmware. Samsung Kies does not work. It says that there was a communication error during the upgrade process, whatever that means. I took it to the ATT store and they revived it within a few minutes with no data loss. This happened twice. I just tried to manually flash the update using odin, but I get this message:
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> amss.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> boot.img
<ID:0/003> cache.img.ext4
<ID:0/003> mdm.bin
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Now I'm stuck in download mode. I tried to flash the Jellybean ROM again, but it stops right there. I'm currently runnin the stock ICS firmware. Any suggestions?
Beastmutt said:
I've soft bricked my Galaxy Note I717 3 times in the last week while trying to update to the Jellybean firmware. Samsung Kies does not work. It says that there was a communication error during the upgrade process, whatever that means. I took it to the ATT store and they revived it within a few minutes with no data loss. This happened twice. I just tried to manually flash the update using odin, but I get this message:
Initialzation..
Get PIT for mapping..
Firmware update start..
amss.bin
NAND Write Start!!
boot.img
cache.img.ext4
mdm.bin
recovery.img
system.img.ext4
Complete(Write) operation failed.
All threads completed. (succeed 0 / failed 1)
Now I'm stuck in download mode. I tried to flash the Jellybean ROM again, but it stops right there. I'm currently runnin the stock ICS firmware. Any suggestions?
Click to expand...
Click to collapse
So what are you flashing exactly and what slot are you placing it in?
Sent from my CLEAN Note ll
Related
I am trying to download the Clockworkmod Recovery via Odin and it consistently fails. I have check many threads and cannot find a solution!
-Phone: Samsung Galaxy SIII SCH-1535
-Carrier: Verizon
-Odin: Tried using 3.07 and 3.04
-Clockworkmod: At first I was using a .tar file or version 5.0.2.8, then I tried using a .tar.md5 version of the same. Then I tried using a .tar.md5 version of 6.0.1.0.
-I am running Windows 7
The results in Odin are as follows:
-PDA checked and file loaded
-Options: Auto Reboot and F. Reset Time
Odin 3.07:
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005> All threads completed. (succeed 0 / failed 1)
Odin 3.04:
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Completed(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
On my phone, it reads: SECURE CHECK FAIL: recovery
Edit:
History...I had Clockworkmod installed previously.
I was downloading CyanogenMod from Rom Manager and it bricked. I unbricked it with
VRALEC.bootchain.tar.md5
BOOTLOADER_I535VRALF2_618049_REV09_user_low_ship.tar.md5
stock.vzw_root66.7z.torrent
Updated to Jellybean 4.04
Stumped.
After unbricking your phone, did you unlock the bootloader again? It needs to be unlocked to flash custom recovery.
dustin_b said:
After unbricking your phone, did you unlock the bootloader again? It needs to be unlocked to flash custom recovery.
Click to expand...
Click to collapse
-_-
Thanks...
Thanks to Atntpt that opened my mind. I've unpacked .Tar odin package of 5.1.1 and flashed something like modem,boot and recovery (adding .tar in the file names before flash them) one per time, then a custom kernel and last twrp, and the phone stops to reboot. Samsung Switch done the rest of the work. Hi guys, please help me, i'm working no stop on my phone from yesterday without a solution. Yesterday i've tryed to flash mm(Coming from noblerom installed without tripping knox with modified bootloader of 5.0) from the post in general. Flash of mm has fail with an error of a bootloader. then i've tryed to flash latest stock rom(not of my country), and gave me an error in flashing hidden.img, i've tryed to flash in odin, seems fine and phone boots but have no charge. attacched to charger the phone boots and shut down after 5 seconds.
Both recovery and download mode, works
in official recovery and twrp can't mount system
in official says
failed to mount '/system (invalid argument
If you know something about, please help me.
Log of odin flash
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cm.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
after hidden fails flash custom kernel via odin.. i should boot normaly..(will tip KNOX!!) that was the reason i tiped knok was unable to bypass that situation
Atntpt said:
after hidden fails flash custom kernel via odin.. i should boot normaly..(will tip KNOX!!) that was the reason i tiped knok was unable to bypass that situation
Click to expand...
Click to collapse
can you send me a link?
I'm glad I could help
I have successfully installed TWRP without a hitch, and I can roll that back to stock recovery if I need to. Now, I have tried every available Sprint friendly rom I can find including stock ROMs. MOAR, etc. Every time I try to install a zip I encounter the same error:
Could not find 'META-INF/com/google/android/update-binary' in the zip file.
Error installing zip file '/sdcard/customROMfile.zip'
Not sure if this helps but the only zip file it ever successfully installed was Galaxy Note 5 OGD/OI6/OK3 Stock Deodexed Roms (https://forum.xda-developers.com/sp...galaxy-note-5-ogd-deodexed-stock-rom-t3191065) That installed correctly but when rebooting the phone is exactly the same - hangs on boot flash SAMSUNG logo screen as soon as you turn it on.
I did try to roll back to the stock firmware using Odin but when I try to choose the file within Odin to push to the phone Odin freezes. I have spent 3 days on this now and I really don't know what to do. I hope I didn't brick this $400 phone. Any help is surely appreciated as I have already had to buy a cheap replacement for the time being.
These are the errors I receive when trying to flash a .tar (stock recovery, custom rom,) within Odin (every version I have tried...... so many different versions its crazy)
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response form LOKE
<ID:0/003> param.bin
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003>
<ID:0/003> Receive Response form LOKE
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Hi !
Try to use some different Odin versions and also be sure you flash the proper firmware file for your device
So I have the AT&T variant of the Samsung Galaxy S7 (SM-G930A). I had installed root using a tutorial I found on these forums and everything went great for months. I started getting some errors after automatic updates ran (the Play Store kept crashing) so I tried to flash back to the stock firmware. Doing this, I ended up at the "An error has occurred while updating the device software. Use the Emergency recovery function in the Smart Switch PC software" page.
I've tried using Smart Switch, but the application tells me that my device is unsupported and entering my model and serial numbers into the software just causes it (the smart switch app) to crash.
On the Android Recovery screen, I can see that I have the G930AUCS2APH1 firmware running Android 6.0.1. I believe I have found the original stock firmware for this version here: https://forum.xda-developers.com/at...rmware-stock-sm-g930a-ph1-odin-files-t3458890
But whenever I try to flash anything other than CP to my phone in Odin, I end up with a FAIL! (Auth) error.
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've tried using different USB ports and cables, as well as a few different firmwares (admittedly, even some that are not the PH1 update) but all end up with the same result.
Can anyone help me out? I believe I'm doing everything right but I cannot get my phone up and running again for the life of me.
OKAY so I believe I fixed the problem before anyone could get to this so this is for anyone that stumbles across this thread. I was able to successfully flash the PK1 update to my phone. I found the firmware here: https://drive.google.com/drive/folders/0B_lsL4sQwjajY2dxSkFjYmw4OGM
Just flashing the AP package seems to have worked fine.
So I'm trying to reset my phone(regular S8 but hoping if someone else had the same issue the fix might be the same) as a bad rom flash caused some sort of issue and couldn't get back into twrp "official binaries only"
Find latest firmware for my csc (which was july) doesnt work, I thought it might have been a BL issue as I had the august patch through a custom rom, found a different csc which was from august, and I get the same error
I also no longer get the official binaries only, just a bootloop of "An error has occurred while updating....use emergency recovery function in smart switch" which I also tried, no luck, but I can still get into download mode
Using most recent odin, official cable, updated usb firmware and such and am running as admin. Have tried different ports too, but it always fails at same step
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 5716 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> param.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Phone also says SW REV CHECK FAIL (Bootloader) Device 5, Binary: 4 after failed ODIN install
Any Ideas? Thanks
ACardAttack said:
So I'm trying to reset my phone(regular S8 but hoping if someone else had the same issue the fix might be the same) as a bad rom flash caused some sort of issue and couldn't get back into twrp "official binaries only"
Find latest firmware for my csc (which was july) doesnt work, I thought it might have been a BL issue as I had the august patch through a custom rom, found a different csc which was from august, and I get the same error
I also no longer get the official binaries only, just a bootloop of "An error has occurred while updating....use emergency recovery function in smart switch" which I also tried, no luck, but I can still get into download mode
Using most recent odin, official cable, updated usb firmware and such and am running as admin. Have tried different ports too, but it always fails at same step
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 5716 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> param.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Phone also says SW REV CHECK FAIL (Bootloader) Device 5, Binary: 4 after failed ODIN install
Any Ideas? Thanks
Click to expand...
Click to collapse
You are trying to downgrade from bootloader 5 to 4 (see here Device 5, Binary: 4 )which it wont let you. download firmware with bootloader 5