MY galaxy note 10.1(gt-n8000) is bricked.so i tried to recover it with odin using firmware,twrp recovery,cwm recovery.
but showing the same problem for all.
it shows fails and done up to NAND WRITE START!!
but i didnt tried with bootlader for my tab version.
i cant find bootloader for galaxy note10.1(gt-n8000) any where.
->can anyone plz try to fix the problem and help me to find bootloader for galaxy note 10.1(gt-n8000).
some are saying that my mother board is crashed..is that real:crying:crying:
Flash stock rom via Odin first .
Post fail message .
I have the same problem.
Might be Nand memory fail, quite a common issue with these 1st. generation GT-N8000's
I have tried several different recovery's and Odin's. Can't figure out the fix.
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> recovery.img
<ID:0/008> NAND Write Start!!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Related
Hi Friends
I was trying to Root my Samsung GT I9003(Gingerbread v2.3.6) using Odin3 v1.85 (Did all the Download Mode Process, Vol Down + Middle Key + Power Button) and it failed with the below Messages;
<ID:0/008> Removed!!
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> zImage
<ID:0/008> NAND Write Start!!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
When I Removed and Restarted the Phone , it is displaying a small icon with a mobile - PC and a Warning symbol in between them (As in the Attached Image), Please suggest how to make it work. i restarted in download mode and thats it the screen keep in the download mode please help me.
mehdilio said:
Hi Friends
I was trying to Root my Samsung GT I9003(Gingerbread v2.3.6) using Odin3 v1.85 (Did all the Download Mode Process, Vol Down + Middle Key + Power Button) and it failed with the below Messages;
<ID:0/008> Removed!!
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> zImage
<ID:0/008> NAND Write Start!!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
When I Removed and Restarted the Phone , it is displaying a small icon with a mobile - PC and a Warning symbol in between them (As in the Attached Image), Please suggest how to make it work. i restarted in download mode and thats it the screen keep in the download mode please help me.
Click to expand...
Click to collapse
We dont flash zimage from odin. We flash normalboot.img
Sent from my GT-I9003 using Tapatalk 2
thanks for the answer.but waht sould i do now?is my phone broken? please can you be mor explicit. thanks
Flash only pit file while you are in that mode, odin must detect the device.
When flashing is done Remove batery and enter download mode.
Flash pda/phone /modem/modem.
Your device revives.
well i have tried to flash about 5 times now and odin just keeps failing
now i am soft bricked
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> recovery.img
<ID:0/008> NAND Write Start!!
<ID:0/008> cache.img
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I used the file CF-Auto-Root-ha3g-ha3gxx-smn900.tar.md5
and ran Odin in admin everytime but it will not flash
also tried 3 differant usb ports
anyideas
same things happen to me. when i first get the n900 i was able to flash cf root. after that whenever i flash the stock rom and then trying to root, the cf root flashing will failed. anyone could help?
i solved it. use odin v3 1.85.
I recently tried to unroot my Galaxy Note 10.1 SCH-I925. When I tried to flash the stock firmware on it I get the following:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I tired almost every piece of firmware I could find but I have no success . I am still kinda new to flashing firmware but this is my only failure so this has got me stuck. Is there anyone out there with a solution or should sent it to a professional
i have the same problem if you find solution please advice
I rooted my Samsung Galaxy Tab 4 then factory reset, skrewing it up. I went to flash the stock ROM using Odin3 and i receive SetupConnection.. or NAND Write Start FAIL!. My version of Odin is v3.10.7 i'v tried different USB ports, different cables, plugging in tablet first & after Odin,taking out the micro USB card , different Odin versions, plugging it in then going into download mode, and running as administrator. What do i do
<ID:0/008> Added!!
<ID:0/008> Odin engine (ID:3. 1100)
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initalzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> SingleDownload.
<ID:0/008> aboot.mbn
<ID:0/008> NAND Write Start!!
<ID:0/008> FAIL!
<ID:0/008>
<ID:0/008> Compplete(Write) operation failed
<OSM> All threads competed. (succeed 0 / failed 1)
OR
<ID:0/005> Added!!
<ID:0/005> Odin engine (ID:3. 1100)
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
Hello, I would need some assistance with my phone.
I've wanted to upgrade to 8.0.1 to test it's capabilities, but it bricks everytime I try to install TWRP or IMEI doesn't work after removing dm-verity and rooting with CF Autoroot.
The Log that Odin Gives me:
<ID:0/008> Added!!
<ID:0/008> Odin engine v(ID:3.1401)..
<ID:0/008> File analysis..
<ID:0/008> Total Binary size: 2752 M
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> NAND Write Start!!
<ID:0/008> SingleDownload.
<ID:0/008> sboot.bin
<ID:0/008> cm.bin
<ID:0/008> FAIL!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've tried:
Running Odin as admin.
Changing USB port.
Restarting Computer.
Downloading Different ROM. (Installation Fails with everyother except Current)