Database Info

[Q] ODIN: Flash Write Failure?

HELP! I soft bricked my GSIII (Verizon) and I attempted to flash VRALG1-Full.tar to unbrick it but then it failed with this on the phone:
Erasing USERDATA Partition..
ODIN: flash write failure
and this was the odin log on the pc:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Erase...
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> system.img.ext4
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Write)
<OSM> All threads completed. (succeed 0 / failed 1)
What can I possibly do to bring this phone back to life? I will do anything except change anything internally or send it to Verizon or Samsung.

Sm-n900 Odin keeps failing to flash

well i have tried to flash about 5 times now and odin just keeps failing
now i am soft bricked
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> recovery.img
<ID:0/008> NAND Write Start!!
<ID:0/008> cache.img
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I used the file CF-Auto-Root-ha3g-ha3gxx-smn900.tar.md5
and ran Odin in admin everytime but it will not flash
also tried 3 differant usb ports
anyideas

same things happen to me. when i first get the n900 i was able to flash cf root. after that whenever i flash the stock rom and then trying to root, the cf root flashing will failed. anyone could help?

i solved it. use odin v3 1.85.

[Q] My Samsung note 10.1 GT-n8010 is in a bootloop. Hardware buttons are not working.

My galaxy note 10.1 is in a bootloop. Hardware buttons are not working for factory setting.
I tried Odin3 v1.85 with N8010XXUDNE4_N8010PHNDNF1_HOME.tar.md5 but i get :
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> sboot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I have tried other USB-ports, no succes.
Can someone help me please?

G930F stuck in a bootloop

Hi all,
My S7 (rooted) appears to be stuck in a bootloop. Last night, I was using it as normal and set it down to charge overnight.
Woke up this morning, recurring bootloop. Tried to get into recovery, but just got a 'Downloading' screen. Tried to flash a stock firmware (vol down key etc) but got
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1101)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
For info, it's rooted, running a custom rom and until yesterday was working fine. No new software has been installed in the past couple of weeks, no settings have been changed.
Any ideas as to how I can get the phone working again?

The "Downloading..." screen is where you need to be to flash stock with ODIN
Make sure to use ODIN 3.12.3 minimum version

I'll give it a go when I get home from work and report back. Seems I was using an older version of Odin (3.11.1). I now have 3.12.3.
Thanks for the reply.

So I loaded a BL, AP, CP & CSC file into Odin (stock 7.0 firmware based on my phone carrier).
Clicked Start:
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> skip file list for home binary
<ID:0/003> param.bin
<ID:0/003> modem_debug.bin
<ID:0/003> Home Binary Download
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003>
<ID:0/003> FAIL! (DeviceInfo)
<OSM> All threads completed. (succeed 0 / failed 1)
Doesn't seem to like what i'm doing.

<ID:0/003> FAIL! (DeviceInfo)
Do you have a green/blue COM port lit up at the top of ODIN when you connect the phone?
Tried a different USB lead / port?

The Com port info shows in blue. Tried on two different PCs, 2 different official cables, 4 different USB ports.

Getting a bit further:
<ID:0/003> Odin engine v(ID:3.1207)..
<ID:0/003> File analysis..
<ID:0/003> skip file list for home binary
<ID:0/003> param.bin
<ID:0/003> modem_debug.bin
<ID:0/003> Home Binary Download
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> cm.bin
<ID:0/003> FAIL!
Any thoughts?

Samsung J7 SM-J710F Failure to downgrade from 8.0.1 to 7.0

Hello, I would need some assistance with my phone.
I've wanted to upgrade to 8.0.1 to test it's capabilities, but it bricks everytime I try to install TWRP or IMEI doesn't work after removing dm-verity and rooting with CF Autoroot.
The Log that Odin Gives me:
<ID:0/008> Added!!
<ID:0/008> Odin engine v(ID:3.1401)..
<ID:0/008> File analysis..
<ID:0/008> Total Binary size: 2752 M
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> NAND Write Start!!
<ID:0/008> SingleDownload.
<ID:0/008> sboot.bin
<ID:0/008> cm.bin
<ID:0/008> FAIL!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've tried:
Running Odin as admin.
Changing USB port.
Restarting Computer.
Downloading Different ROM. (Installation Fails with everyother except Current)