Hi, anyone scratch their phone with their keys / key-chain?
i had mine scratched but not to deep, it's visible if only i stand under the sun, or staring at my DVP diagonally,
are there any accesory to replace only the glass screen? or are there any kind of 'filler' which could 'hide' them..
It would be very cool if there is some kind of a filler :good:
Related
Okay guys first of all i know all the benefits to a screen protector, but on my old iPhone that didnt have a screen protector and the screen was fine, no scratches etc etc.... I was wondering do we really, really need a protector on the diamond? As im sure that without it it would be much smoother to use?
I applied my screen protector as soon as I unboxed my phone however was wondering of the opinions of people that a) didnt and b) took their protectors off and used the device.
Does the screen 'feel' any different without it?
Please post in the right section (Diamond accessories).
Screen protectors are advised, 'cause you reduce the risk of damage to the screen itself (which will be expensive to replace). It will dull the sensitivity slightly (although less than on the iPhone screens as they use different technology.)
HI
the diamond really need a screen protector
the glass is very fragile!
personnaly i ve made a little scratch
when i remove my old screen protector
with a knife!!!
the iphone as a really good screen
very hard to scratch....
anyone know whats the difference in screen tech between the iPhone and the Diamond?
irdawood said:
anyone know whats the difference in screen tech between the iPhone and the Diamond?
Click to expand...
Click to collapse
Diamond has resistive touch screen, iPhone has capacitive.
That means the iPhone can have a solid (glass) front to the screen.
xboxmod said:
HI
the diamond really need a screen protector
the glass is very fragile!
personnaly i ve made a little scratch
when i remove my old screen protector
with a knife!!!
the iphone as a really good screen
very hard to scratch....
Click to expand...
Click to collapse
Use the sticky side of a piece of tape to remove the old screenprotector.
That's the way the pro's are doing it. Use the same sticky tape to pick up small residue on screen before applying the new one.
I have PDA's more 10 years not the first but i still keep my old casio e-105 and since that a lot of them ...
For me it was all a big worry the screen scratches and so every pda had screen protector kit and i tried allot of them different brands different textures, glued , fitted etc...
Right now i look back on my desk and see a bunch of PDA all of them with beautiful screens none with scratches.. BUT.... BUT... I'm more happy to have 9 year old pda without scratches ??? don't think so....
I don't think i will be worst if one them had a screen scratch vs the issues a screen protector have, less sensitive worst view of screen etc...
In diamond is even worst because the screen don't have borders to fit the protection, so will add one more layer on top.......
Even if i have mixed feelings about it i will keep my diamond without screen protector...
maybe next year when i buy the new "whatsoever model" and put this on the shelf i will say damn scratch on the screen but so what.... its on shelf and the time i had keep it, i use that screen at full no lame plastics on top...
just a thought....
But the iPhones isn´t usable with a stylus only with fingers due to the influence in the static field of the capacitive touchscreen.
Well actually the Diamond got TWO touchscreens, it also have a capacitive touchscreen under the normal screen and under the touchpad (buttons) beside the resistive touchscreen on the surface of the screen. (sushilange fond that).
it is a must
you are mad if you don't
fcaeiro said:
I have PDA's more 10 years not the first but i still keep my old casio e-105 and since that a lot of them ...
For me it was all a big worry the screen scratches and so every pda had screen protector kit and i tried allot of them different brands different textures, glued , fitted etc...
Right now i look back on my desk and see a bunch of PDA all of them with beautiful screens none with scratches.. BUT.... BUT... I'm more happy to have 9 year old pda without scratches ??? don't think so....
I don't think i will be worst if one them had a screen scratch vs the issues a screen protector have, less sensitive worst view of screen etc...
In diamond is even worst because the screen don't have borders to fit the protection, so will add one more layer on top.......
Even if i have mixed feelings about it i will keep my diamond without screen protector...
maybe next year when i buy the new "whatsoever model" and put this on the shelf i will say damn scratch on the screen but so what.... its on shelf and the time i had keep it, i use that screen at full no lame plastics on top...
just a thought....
Click to expand...
Click to collapse
But still love the Love and passion you speak of.
Something that looks this nice Should look as nice ass possible.
Maybe some company is smart enough to make a full body screen protector. (maybe it allready exist heavn't looked)
I have double feelings about this.
My Touch Screen wothout protections is starting to lose the top layer on the right side of screen (i never really got the hang of using that unnatural touch scrolling and kept using the scrollbar)
Try to teach an old dog new tricks
It's expensive, but this seems to be a good full-protection:
http://www.zagg.com/invisibleshield...es-screen-protectors-covers-skins-shields.php
We will see this shamefull Spam through the fingers this time
The video sells let's be honoust.
But a video of how to strap on these Protective Phone Kevlar Condom Vests would be usefull.
If anyone get's he's her hands one one of these i'd be interested on how it looks and let's itself be applied. It is pricey but for the Price i'll be paying for the Pro it might be a very good investment.
im going to give that invisible shield a try. sounds cool and i like my devices like from box :>
Hi Guys
as per silkworms post I have seen this screeen available but i fears it going to be the same crappy plastic affair thats easily scratched that the phone is shipped with.
Does anyone know where I can get a tempered glass/hard as nails replacement please? It would be ideal if they can fit it as well. Or maybe you have experience with the screen linked above, is it any good?
Monty Burns said:
Hi Guys
as per silkworms post I have seen this screeen available but i fears it going to be the same crappy plastic affair thats easily scratched that the phone is shipped with.
Does anyone know where I can get a tempered glass/hard as nails replacement please? It would be ideal if they can fit it as well. Or maybe you have experience with the screen linked above, is it any good?
Click to expand...
Click to collapse
hmmm, a hard screen would prohibit you from applying pressure to the digitiser yes!
so that no touch screen can work for you.
Iphone has tempered glass but uses capacative screen, so need need for pressure to be applied through the glass i think.
But the diamond is resistive screen and required physically to push on the digitiser (screen under the top screen) to detect input
aww crap..... problem is this screen is soooo soft, its getting scratched so easily and I didn't want another layer of plastic protector on the top.
This to me is the one major problem with this phone that I cannot seem to find a suitable answer for.
Thanks for your reply and what you say makes sense....
maybe a screen protector?
is not as good and makes the phone not look as nice but stops scratches ok.
or maybe sell your house and car so you have no keys in your pockets
I make sure I don't have keys or money in the same pocket. I think this gets scratched when I put it on my desk - which it should be able to handle!
Diamond screen
just keep mine in the leather pouch it came with never had a problem.
Phone: Orange HTC Touch Diamond
Rom: 1.93.405.1_WWE
Rom Date : 08/09/08.
Radio: 1.00.25.07
Protocol : 52.29.25.12H
Ext Rom : SwiftBL.Diamond V6.2
HSPL : 1.24
Monty Burns said:
I make sure I don't have keys or money in the same pocket. I think this gets scratched when I put it on my desk - which it should be able to handle!
Click to expand...
Click to collapse
you put your diamond.....face down......on a desk.....! your nuts!
why? Its not bothered any other phone I've had ..... then again, I've never had such a soft, easily pushed in screen before either.
And yes I do, that's what the "turn it over to silence it" functions for.
I also was hesitant to put a screen protector on it. But I eventually did it (the one that came with the Diamond) - if you put it on neatly, it is virtually invisible, the screen is shiny, and I do not find any difference in sensitivity. Try it, if you do not like it you can always remove it. I am fine with this solution, and feel much easier about the danger of scratches. it not only protects the screen from scratches, but also from the danger of braking it by being hit, because the impact of an accidental hit on the screen gets physically distributed over a wider surface by the protector. Before applying it, I cleaned the screen with Displex display polish, so it would stick very evenly over the surface and the edges - which it did. I can only recommend it (before the first scratch appears....)
the screen of the diamond is supposed to be tempered glass!!
and on my diamond i can press the screen, but it does not feel soft at all.
sandervanzijl said:
the screen of the diamond is supposed to be tempered glass!!
and on my diamond i can press the screen, but it does not feel soft at all.
Click to expand...
Click to collapse
Really? Touch your mates I-Phone screen and then yours ......
get the pouch PO S390 from HTC, it is toooo cool
PS. I am using it
sandervanzijl said:
the screen of the diamond is supposed to be tempered glass!!
and on my diamond i can press the screen, but it does not feel soft at all.
Click to expand...
Click to collapse
No it's not. Underneath the top layer (which is the soft plastic that can scratch) it is tempered glass. HTC made this decision to protect the diamond screen from cracking. When pressure is applied to the casing that would otherwise cause the diamond to break in a bad way.
Without a capacitive screen (such as the iphone) you could not have glass as the top layer or else it could not recognise the stylus or your fingers.
It's better this way, as it means you have the option of a stylus. The iphone could never use a stylus for this reason.
Hi Guys and Girls,
Could any Aussies recommend me a polaris repairer in Australia need to get a new front face and glass, put a sheet of sandpaper in the same pocket as my polaris and well lets just say that im not going to get any splinters from my phone anytime soon
Cheers
How the hell did you sandpaper your screen?! (out of curiosity). I think you may need a new screen for it, depending on the damges!
picture of the screen would be interesting...
the screen feels very gentle interesting how it looks now
Good news is the part you need (it's actually the digitizer) is about $35AUD on ebay... bad news is you'll probably spend an hour changing it but if you take it slowly you should be ok
Thanks for the reply guys, so is the very outer glass the digitizer? I would have thought it was just a face plate guess i'm wrong. To answer some questions Bobby.pike - A long story - Heres a short version at work put my phone in left shirt pocket and small tools i am using in right shirt pocket, left shirt pocket got wet (phew!! that was close I said to myself) transfered phone to right pocket out of habbit continued putting tools and sandpaper in same pocket 12 hours later presto!!!!! sand papered screen bnm7bnm - screen looks kinda like the top of a finger nail you cant pick out the individual scratches its just not clear any more but it feels horrible sending a sms is kinda like the feeling some people get when they scratch their nails along a blackboard (no im not obsessed with my fingernails both examples just led that way somehow?)
Yep the outermost glass is the digitizer
I was peeling off my bodyguardz screen protector to put on a new one, and the darn thing was so stuck to my screen it took a lot of force to peel it off. As I was pulling it away I noticed that my "screen" seemed to be lifted off my HTC fuze!! After I kept pealing I noticed from the side that there was a film that was peeling off that had adhesive to the screen with the body guardz. I'm too scared to proceed and have left my phone that way.. my question is there a protective film (not counting any sort of screen protector even the one that comes with the fuze) on top of the screen, and that was what was peeling off? Is that film important for the touch screen itself aside from protecting it (or does it keep some part of the screen in place etc etc).
Thanks in advance, the screen does turn on and is still touch sensitive but I'm too scared to peel off the rest of the body guardz that have that "film" come off with it.
Someone removed that and lost their touchscreen so be scared IMHO.
aaahhhhh can you link me to that post? I tried doing a search, I cant separate that film from the bodyguardz either... =(
I think it is the digitizer that is comming off, or part of it anyways... the only thing I could find online is this
http://forum.xda-developers.com/showthread.php?t=392301&page=3
Post#27
"--------------------------------------------------------------------------------
Hello again
So
After giving it a lot of thought, i decided to disasamble my phone to see if i can get rid of that stain. I have to say that it was a bit difficult to folow the guide but i finaly opened my cruise.
In the end i realised where was my problem.
The digitizer has 2 components:
A glass layer witch is on the bottom, and a plastic one (on top) witch are keppt together by twosided adhesive tape.
The "stain" was caused by the plastic layer, witch for some reason wasn't staying straight (it had a small bump...).
I figured this out when i pealed this layer from the glass one, witch i shouldn't have done because the layer has a connection with the glass and the small ribbon witch goes into the mb.
So for any of you, if you encounter my problem, better let it that way, cause the alternative will be a new digitizer.
I'll go to the htc service in romania to see how much will they charge me for a new one, and if the amount is to much, i'll try to order one from the web(altho not that many companies ship to my country )
Wish me luck.
LE: I have a question thow
How can you remove the digitizer from the casing ?
I tryed to pull it but i was afraid to damage something (else).
--------------------------------------------------------------"
http://forum.xda-developers.com/attachment.php?attachmentid=100767&d=1216648485
Heres a link to the picture the guy with the polaris took... the HTC black bordered part is still on the screen but there is a film sitting on top of it thats peeling off with the bodyguardz.
This is a cruise polaris and not a raphael but I think this post is referencing the same thing. Does anyone have any advice to give me? My phone is still sitting there with half of the "digitizer" peeled off stuck to the bodyguardz grrrrrrr
bump...........
tassadar898 said:
I was peeling off my bodyguardz screen protector to put on a new one, and the darn thing was so stuck to my screen it took a lot of force to peel it off. As I was pulling it away I noticed that my "screen" seemed to be lifted off my HTC fuze!! After I kept pealing I noticed from the side that there was a film that was peeling off that had adhesive to the screen with the body guardz. I'm too scared to proceed and have left my phone that way.. my question is there a protective film (not counting any sort of screen protector even the one that comes with the fuze) on top of the screen, and that was what was peeling off? Is that film important for the touch screen itself aside from protecting it (or does it keep some part of the screen in place etc etc).
Thanks in advance, the screen does turn on and is still touch sensitive but I'm too scared to peel off the rest of the body guardz that have that "film" come off with it.
Click to expand...
Click to collapse
That has happened to me as well. I'm afraid you'll just have to get another digitizer off ebay.
ughhh!! any help on the assembly?
Spray some of the liquid that came with it on the touchscreen (underneath the bodyguardz screen protector; spray little by little or use your finger) and it should come off with a little less effort without tearing out the screen. That's what I did. Btw, make sure you turn off your phone and dry it before you turn it back on if you do that
Hi,
I don´t know how but I broke my Polaris Screen (both LCD and Touch screen).
The touch screen is the glass on which you use your stylus, and has a thin transparent foil top layer. The touch screen is broken because I can see a few cracks beneath the foil but I can't feel the cracks!
The LCD is broken because I can see blue/black oily spots and stripes.
My Polaris is almost 3 years old, so I cannot spend almost $200 for this parts replacement.
Does anyone have a bricked (or boxed) Polaris, with a screen ok, for sell, so I can replace mine?
Any other suggestion is welcome.
Thanks