Hi Guys
as per silkworms post I have seen this screeen available but i fears it going to be the same crappy plastic affair thats easily scratched that the phone is shipped with.
Does anyone know where I can get a tempered glass/hard as nails replacement please? It would be ideal if they can fit it as well. Or maybe you have experience with the screen linked above, is it any good?
Monty Burns said:
Hi Guys
as per silkworms post I have seen this screeen available but i fears it going to be the same crappy plastic affair thats easily scratched that the phone is shipped with.
Does anyone know where I can get a tempered glass/hard as nails replacement please? It would be ideal if they can fit it as well. Or maybe you have experience with the screen linked above, is it any good?
Click to expand...
Click to collapse
hmmm, a hard screen would prohibit you from applying pressure to the digitiser yes!
so that no touch screen can work for you.
Iphone has tempered glass but uses capacative screen, so need need for pressure to be applied through the glass i think.
But the diamond is resistive screen and required physically to push on the digitiser (screen under the top screen) to detect input
aww crap..... problem is this screen is soooo soft, its getting scratched so easily and I didn't want another layer of plastic protector on the top.
This to me is the one major problem with this phone that I cannot seem to find a suitable answer for.
Thanks for your reply and what you say makes sense....
maybe a screen protector?
is not as good and makes the phone not look as nice but stops scratches ok.
or maybe sell your house and car so you have no keys in your pockets
I make sure I don't have keys or money in the same pocket. I think this gets scratched when I put it on my desk - which it should be able to handle!
Diamond screen
just keep mine in the leather pouch it came with never had a problem.
Phone: Orange HTC Touch Diamond
Rom: 1.93.405.1_WWE
Rom Date : 08/09/08.
Radio: 1.00.25.07
Protocol : 52.29.25.12H
Ext Rom : SwiftBL.Diamond V6.2
HSPL : 1.24
Monty Burns said:
I make sure I don't have keys or money in the same pocket. I think this gets scratched when I put it on my desk - which it should be able to handle!
Click to expand...
Click to collapse
you put your diamond.....face down......on a desk.....! your nuts!
why? Its not bothered any other phone I've had ..... then again, I've never had such a soft, easily pushed in screen before either.
And yes I do, that's what the "turn it over to silence it" functions for.
I also was hesitant to put a screen protector on it. But I eventually did it (the one that came with the Diamond) - if you put it on neatly, it is virtually invisible, the screen is shiny, and I do not find any difference in sensitivity. Try it, if you do not like it you can always remove it. I am fine with this solution, and feel much easier about the danger of scratches. it not only protects the screen from scratches, but also from the danger of braking it by being hit, because the impact of an accidental hit on the screen gets physically distributed over a wider surface by the protector. Before applying it, I cleaned the screen with Displex display polish, so it would stick very evenly over the surface and the edges - which it did. I can only recommend it (before the first scratch appears....)
the screen of the diamond is supposed to be tempered glass!!
and on my diamond i can press the screen, but it does not feel soft at all.
sandervanzijl said:
the screen of the diamond is supposed to be tempered glass!!
and on my diamond i can press the screen, but it does not feel soft at all.
Click to expand...
Click to collapse
Really? Touch your mates I-Phone screen and then yours ......
get the pouch PO S390 from HTC, it is toooo cool
PS. I am using it
sandervanzijl said:
the screen of the diamond is supposed to be tempered glass!!
and on my diamond i can press the screen, but it does not feel soft at all.
Click to expand...
Click to collapse
No it's not. Underneath the top layer (which is the soft plastic that can scratch) it is tempered glass. HTC made this decision to protect the diamond screen from cracking. When pressure is applied to the casing that would otherwise cause the diamond to break in a bad way.
Without a capacitive screen (such as the iphone) you could not have glass as the top layer or else it could not recognise the stylus or your fingers.
It's better this way, as it means you have the option of a stylus. The iphone could never use a stylus for this reason.
Related
Despite being careful, my screen is increasingly getting scratched. The scratches are only noticeable when the device is off (thank goodness).
If there are any other persons with the same problem, please post here.
I guess that you did not use a screen protector, right?
Correct. I also own a TyTn II and have no issues with the screen whatsoever. Of all the devices I have owned over the years, only this TC has been an issue.
I was noticing the same so applied the included screen protector... I usually don't bother as I don't like them and the device is a throwaway after a year anyway so it's not a big deal. But in this case I figured if it was like that after a few weeks then after 6 months I'd probably not be able to see the screen!
I've had a few Palm devices before i switched to WM and i noticed this scratching as well......Luckily i'm using the included protector.
I have to say on my previous Palms i didn't have this problem, also while using a protector, which makes me suspect that the stylus is the real problem here.
Any thoughts on this?
I use the screen protector, and also got some spares. I also cover the whoel device with a liquid "screen" protector to helpthe faces from getting ruined. So far so good
Problem with the Touch Cruise (Polaris...) is, that the screen is - unlike the Kaiser's - flat and not indent. This means, its exposed to EVERYTHING it touches. Thus chances are higher you'll get one or two scratches once in a while.
Second thing which I can only cite other ppl on other forums: those Polaris allegedly have a softer top layer to be able to operate the unit using only your finger. This would support catching scratches as well...
I'd use the protector. It's a shame having scratches on that mirrored surface.
Schaggo, can you indicate what other forums people are commenting about the screen?
I am interested in your view that the top layer is softer than most others.
i agree that the stylus is the problem ... to much thin... , i tried one from nintendo ds , it's much more rounded and it slide better ( sorry for my english...)
vdavide said:
i agree that the stylus is the problem ...
Click to expand...
Click to collapse
Yeah, I'm using one from my old IPAQ !
ou guys use other styluses? I use my finger, thats what the Touch series should be made for I know it doesnt really work, the fonts are way too small...
Hicksville, I cannot judge what the other ppl say because I used the protector right away. Nothing ever touched my screen without the protector applied. But as I got it, the top film seems to be made of a softer material than the one of other WM devices. Reason for that is the reason for the "Touch" in the devices name: to make the touch layer register the actual point, where the finger tries to point at. If the top layer would be harder/stiffer it allegedly cant tell where exactly the finger tried to hit the screen because the area involved ('touched' eg. pressed down) would be bigger than with a soft top layer. Thats what I got and which makes some sense.
And logically a soft surface is more prone to be 'hurt' than a surface made of hard material. So I guess this might be connected. But I have to repeat, these are all assumptions by users and in no way official statements.
I've been using my phone w/o a screen protector, and I haven't gotten any scratches. Like schaggo I mainly use my finger. I did however test the screen by applying a lot of pressure with the stylus in a sweeping motion, and I didn't get any scratches (don't ask me what possessed me to try this). I later tried a much more conclusive scratch test on a CDMA Touch unit in a store on both the screen and the body and got no scratches! Yes, I applied a lot of pressure, (However, someone else had managed to put a scratch on the CDMA Touch's screen, but that scratch was really deep and probably done with a really sharp object; on the other hand, I did my testing with my TC stylus). I coudln't scratch both the body or the screen using a lot of pressure from my stylus and my nails. Maybe some of you exposed the TC to coins or keys inadvertantly?
That's pretty gutsy to test it on your own device. I am using the screen protector and I have a few scratches on that which is fine. When the time comes, I'll replace it with a new protector. As far as the rest of the case, I have been very careful so far with my device and haven't gotten any scratches anywhere on it. I think that suede/rubber whatever feel of the device is nice but I think it will scratch.
hambola said:
That's pretty gutsy to test it on your own device. I am using the screen protector and I have a few scratches on that which is fine. When the time comes, I'll replace it with a new protector. As far as the rest of the case, I have been very careful so far with my device and haven't gotten any scratches anywhere on it. I think that suede/rubber whatever feel of the device is nice but I think it will scratch.
Click to expand...
Click to collapse
Yes, very gutsy, I pushed hard enough to watch the screen sink it and rise back up very slowly...I don't know what I was thinking, but hey it turned out well w/o any scratches. The plastic on the screen is a lot stronger than your typical screen protector, so that fact along with my tests pretty much confirmed it for me. Furthermore, I don't like the look of screen protectors and I'm worried that they'll hinder touch flow.
As far as the casing, it seems bulletproof. But I'm like you, I keep it in the oem suede/microfiber case whenever its not being held to my ear for a phone call, and I've never put it in a pocket with anything else.
Actually with the suede comment I was talking about the body of the actual device. I'm not sure what that is but it has a nice texture to it. I haven't used that pouch that came in the package. Not a big fan of it. Head on over to the acc forum to see which cases people like. As far as the screen protector goes the original one does not hinder touch capabilities. Also in the acc forum they discuss different screen protectors, you might wanna check out one of those as well.
Okay guys first of all i know all the benefits to a screen protector, but on my old iPhone that didnt have a screen protector and the screen was fine, no scratches etc etc.... I was wondering do we really, really need a protector on the diamond? As im sure that without it it would be much smoother to use?
I applied my screen protector as soon as I unboxed my phone however was wondering of the opinions of people that a) didnt and b) took their protectors off and used the device.
Does the screen 'feel' any different without it?
Please post in the right section (Diamond accessories).
Screen protectors are advised, 'cause you reduce the risk of damage to the screen itself (which will be expensive to replace). It will dull the sensitivity slightly (although less than on the iPhone screens as they use different technology.)
HI
the diamond really need a screen protector
the glass is very fragile!
personnaly i ve made a little scratch
when i remove my old screen protector
with a knife!!!
the iphone as a really good screen
very hard to scratch....
anyone know whats the difference in screen tech between the iPhone and the Diamond?
irdawood said:
anyone know whats the difference in screen tech between the iPhone and the Diamond?
Click to expand...
Click to collapse
Diamond has resistive touch screen, iPhone has capacitive.
That means the iPhone can have a solid (glass) front to the screen.
xboxmod said:
HI
the diamond really need a screen protector
the glass is very fragile!
personnaly i ve made a little scratch
when i remove my old screen protector
with a knife!!!
the iphone as a really good screen
very hard to scratch....
Click to expand...
Click to collapse
Use the sticky side of a piece of tape to remove the old screenprotector.
That's the way the pro's are doing it. Use the same sticky tape to pick up small residue on screen before applying the new one.
I have PDA's more 10 years not the first but i still keep my old casio e-105 and since that a lot of them ...
For me it was all a big worry the screen scratches and so every pda had screen protector kit and i tried allot of them different brands different textures, glued , fitted etc...
Right now i look back on my desk and see a bunch of PDA all of them with beautiful screens none with scratches.. BUT.... BUT... I'm more happy to have 9 year old pda without scratches ??? don't think so....
I don't think i will be worst if one them had a screen scratch vs the issues a screen protector have, less sensitive worst view of screen etc...
In diamond is even worst because the screen don't have borders to fit the protection, so will add one more layer on top.......
Even if i have mixed feelings about it i will keep my diamond without screen protector...
maybe next year when i buy the new "whatsoever model" and put this on the shelf i will say damn scratch on the screen but so what.... its on shelf and the time i had keep it, i use that screen at full no lame plastics on top...
just a thought....
But the iPhones isn´t usable with a stylus only with fingers due to the influence in the static field of the capacitive touchscreen.
Well actually the Diamond got TWO touchscreens, it also have a capacitive touchscreen under the normal screen and under the touchpad (buttons) beside the resistive touchscreen on the surface of the screen. (sushilange fond that).
it is a must
you are mad if you don't
fcaeiro said:
I have PDA's more 10 years not the first but i still keep my old casio e-105 and since that a lot of them ...
For me it was all a big worry the screen scratches and so every pda had screen protector kit and i tried allot of them different brands different textures, glued , fitted etc...
Right now i look back on my desk and see a bunch of PDA all of them with beautiful screens none with scratches.. BUT.... BUT... I'm more happy to have 9 year old pda without scratches ??? don't think so....
I don't think i will be worst if one them had a screen scratch vs the issues a screen protector have, less sensitive worst view of screen etc...
In diamond is even worst because the screen don't have borders to fit the protection, so will add one more layer on top.......
Even if i have mixed feelings about it i will keep my diamond without screen protector...
maybe next year when i buy the new "whatsoever model" and put this on the shelf i will say damn scratch on the screen but so what.... its on shelf and the time i had keep it, i use that screen at full no lame plastics on top...
just a thought....
Click to expand...
Click to collapse
But still love the Love and passion you speak of.
Something that looks this nice Should look as nice ass possible.
Maybe some company is smart enough to make a full body screen protector. (maybe it allready exist heavn't looked)
I have double feelings about this.
My Touch Screen wothout protections is starting to lose the top layer on the right side of screen (i never really got the hang of using that unnatural touch scrolling and kept using the scrollbar)
Try to teach an old dog new tricks
It's expensive, but this seems to be a good full-protection:
http://www.zagg.com/invisibleshield...es-screen-protectors-covers-skins-shields.php
We will see this shamefull Spam through the fingers this time
The video sells let's be honoust.
But a video of how to strap on these Protective Phone Kevlar Condom Vests would be usefull.
If anyone get's he's her hands one one of these i'd be interested on how it looks and let's itself be applied. It is pricey but for the Price i'll be paying for the Pro it might be a very good investment.
im going to give that invisible shield a try. sounds cool and i like my devices like from box :>
Ok, i've had a problem with it, first i removed the protector that was as large as the device and made the screen very ugly, then i got the one from the box and putted it on, every air-bulb was gone when i kept rubbing etc.
1 stayed, under that bulb there was something white, i found out it was a 'piece' of dust.
It was kind of annoying so i removed the screen-protector, now when im trying to put it on i get lots of 'dust-bubbles',
Anyone has an idea of how to do it or should i just leave my diamond without the screen protector?
Protection
Personally i prefer to have a screenprotecter on my device. I can recommend invisible shield. its very durable and will not be scratched. check it out on www.zagg.com
If you remove the protector, then there will alway be dust next time, because the dust get stuck to the protector glue. (I have also remove mine several times)
I have tried zagg, but I can't recommend it. It is a little sticky (which they also says on their homepage) and I don't like that. The floating feeling is gone. It is also not that invisible.
I have selected to buy a new original protector, and will use that.
The trick to get it on without bobbles is to start on the long edge and then slowly add it. (Keep the 'paper' on as long a possible).
(Michael
willyy1991 said:
Ok, i've had a problem with it, first i removed the protector that was as large as the device and made the screen very ugly, then i got the one from the box and putted it on, every air-bulb was gone when i kept rubbing etc.
1 stayed, under that bulb there was something white, i found out it was a 'piece' of dust.
It was kind of annoying so i removed the screen-protector, now when im trying to put it on i get lots of 'dust-bubbles',
Anyone has an idea of how to do it or should i just leave my diamond without the screen protector?
Click to expand...
Click to collapse
The original is washable. Wash it and dry it with a paper towel that sucks in the water bubbles, wipe dry and clean your screen and reapply it.
By the way, this goes to Accessories forum.
mhfalken said:
If you remove the protector, then there will alway be dust next time, because the dust get stuck to the protector glue. (I have also remove mine several times)
I have tried zagg, but I can't recommend it. It is a little sticky (which they also says on their homepage) and I don't like that. The floating feeling is gone. It is also not that invisible.
I have selected to buy a new original protector, and will use that.
The trick to get it on without bobbles is to start on the long edge and then slowly add it. (Keep the 'paper' on as long a possible).
(Michael
Click to expand...
Click to collapse
Where can you buy a new one, i need it really fast because my phone is without protection right now and no i am affraid of pressing it to hard to leave a permanent mark..
tnyynt said:
The original is washable. Wash it and dry it with a paper towel that sucks in the water bubbles, wipe dry and clean your screen and reapply it.
By the way, this goes to Accessories forum.
Click to expand...
Click to collapse
I did this and the dust keeps coming at the protector and my phone and there will be bubles because the dust gives it a 'height-problem'..
I bought invisible shield for mine, its pretty nice after say 4 days from install.
For first 2 days it might seem really bad but it gets much better.
I somehow scratched it without even noticing it, so I sent picture to zagg and they sent me new one. Even though scratch was very minor.
mhf
hi. this my first post on this web site
excuse me for my bad english
i have a diamond and i remove orginal screen protecter because i write sms with letter recorgnizer and the area that i write words on the screen become white and scratch. i remove orginal and buy a new one that for iphone. i cut it for my phone size and apply it. its sooo much stiky and i have a problem like orginal one.i wnat to remove it and when i do it a tiny layer of glue stand on my diamond screen. i can't clean it. and it give a bad scene to my diamond.
what's your idea. i give u a pichture from my diamond screen.
Perhaps you could use isopropyl alcohol, usually it will remove glue without damaging the plastics surface (in that case: your display). DON'T USE nail polish remover, acetone or even benzine, it will remove the glue too - but your display would look "milky". You can get isopropyl alcohol at the pharmacy.
Tell us if that helped you
mhf said:
hi. this my first post on this web site
excuse me for my bad english
i have a diamond and i remove orginal screen protecter because i write sms with letter recorgnizer and the area that i write words on the screen become white and scratch. i remove orginal and buy a new one that for iphone. i cut it for my phone size and apply it. its sooo much stiky and i have a problem like orginal one.i wnat to remove it and when i do it a tiny layer of glue stand on my diamond screen. i can't clean it. and it give a bad scene to my diamond.
what's your idea. i give u a pichture from my diamond screen.
Click to expand...
Click to collapse
You might be interested in this thread: http://forum.xda-developers.com/showthread.php?t=421229
I didn't get a screen protector with mine... I mean, I had a shipment protector with a little tab for peeling off, but nothing came with it for long term use. It's a Sprint, did they just not include one?
the exim screen protector is very good and smooth
I always use the Brando screenprotectors. See their online shop. They ship worldwide for only $ 3,00 shippingcosts.
It is very easy to install, easy to clean, 100% garanteed scratch free and very durable.
iixnullxii said:
I didn't get a screen protector with mine... I mean, I had a shipment protector with a little tab for peeling off, but nothing came with it for long term use. It's a Sprint, did they just not include one?
Click to expand...
Click to collapse
I've got a Sprint Diamond too, and didn't think I got a protector either, but it was in the separate bag that has the manuals. It should have come with one...Wish it woulda come with an extra one too, oh well.
I had the same problem with misalignment and dust bubbles with the HTC protector on my first few tries...i did however fix the problem...
Take the protector off and clean off the phone...use a microfiber cloth to get all the dust and oil off...after its super clean...take the protector and wash it off with some mild soap...rub the soap in with your fingers and get it clean. Be sure to note which side is down. After its clean, hold it around the edges and let the water bead off...i blew on the protector to get residual water off...some water is ok...actually helps with the install...the basically carefully apply it still holding the sides making sure not to leave finger prints. Start from the top and work your way down... i used a credit card pushed against the microfiber cloth to squeegie the protector down...be carefull with the few drops of water. After you have it down...there might be little bubbles or what looks like water spots where water is trapped under the screen...dont worry...just use your phone and leave it alone. Once it heats up from the excessive phone use it will start to dry up and the protector will come out very nice and smooth. Mine is flawless and i did the wash with soap apply and remove at least 3 or 4 times to get it right...Just be patient
I use screen protector from martinfields, what do you say about, anyone have one??
I think the best in market
My HTC one got a nasty scratch in it last week, so I ordered a Martin Fields.
It arrived this morning and I've got it on without any problems. So far I've noticed:
- It's not a perfect fit like the HTC one was. The hole for the speaker at the top is larger than the hole in the phone. It's not bad though.
- The visibility of the screen does seem better than the HTC protector, but I don't know if it's just the placebo effect of having a more expensive protector.
- It was _easy_ to put on, no bubbles at all
- The protector for the bottom buttons is awful. The circle is just the right size to completely hinder using the touch wheel and it's obvious that you've got a piece of plastic on there.
- It seems smoother than the original HTC one when using the stylus.
So far I'm impressed with it. I didn't bother with the camera hole or bottom hard buttons. The in box HTC one was fine for me, but when I got a scratch on it (my stylus somehow developed a sharp edge), it annoyed me.
I'm using the one supplied as standard with a uk CompactIV and it's great- you can hardly tell it's thereand the sensitivity seems fine.
I have 24 diamond screen protectors. Because i bought 24 diamonds and sold them all without screen protectors so i am sorted untill i buy another phone.
After using the martin fields one for a couple of days, I think it's great.
The screen looks much brighter and clearer through it (I thought the HTC one was great, but I do notice the difference). Plus the smoothness is brilliant, theres pretty much no friction for the stylus or fingers
where can i purchase the htc screen protector? the original that comes in the box...
Hello,
Until this morning I was using the screen protector that came with my Pro. And I don't mean the bundled protector you can apply yourself, but the one that comes applied while shipping lol.
But I did that because I know protectors are very very hard to put on without bubbles and dust, and it was indeed hard, I spend around 40 minutes to apply it.
The protector I'm using now is a Brando one, which I think it's excellent, from all the people who saw my phone today there wasn't a single one who noticed the protector.
Anyway, what I wanted to ask is that this only protects the screen itself, so the bottom touch panel is unprotected. Should I leave it like this? If not, what are my options?
One thing I noticed is that when I removed the original protector from the panel, I can finally use camera focus, so even if I use some kind of protection, I will probably need a hole for the center button.
The main reason I'm asking is because I read here some people saying the home and back buttons are peeling off, and I definitely don't want that to happen.
Oh, and no, using cases or any kind of outer protection is not an option. Phones are made to be pocket devices.
Thanks.
I have the zagg shield on and it covers the entire bottom plate plus the center button. Feels great and dont even know its there, no problem with the capacitive touch. Only problem is its on the expensive side, and the screen protector part is useless
Boxwave.
I have used many protectors over many phones. The Boxwave (there are two, I prefer the non-Anti-Glare one) is the most scratch-resistant I have used. For the Fuze (Touch Pro) it comes with the piece for the bottom (with a hole). I notice no degradation in sensitivity of the scroll wheel to zoom in Opera or to actually scroll in other apps. I wish it came with a piece for over the camera port, but that may not work on the brushed aluminum trim that is there.
Boxwave.com
I was peeling off my bodyguardz screen protector to put on a new one, and the darn thing was so stuck to my screen it took a lot of force to peel it off. As I was pulling it away I noticed that my "screen" seemed to be lifted off my HTC fuze!! After I kept pealing I noticed from the side that there was a film that was peeling off that had adhesive to the screen with the body guardz. I'm too scared to proceed and have left my phone that way.. my question is there a protective film (not counting any sort of screen protector even the one that comes with the fuze) on top of the screen, and that was what was peeling off? Is that film important for the touch screen itself aside from protecting it (or does it keep some part of the screen in place etc etc).
Thanks in advance, the screen does turn on and is still touch sensitive but I'm too scared to peel off the rest of the body guardz that have that "film" come off with it.
Someone removed that and lost their touchscreen so be scared IMHO.
aaahhhhh can you link me to that post? I tried doing a search, I cant separate that film from the bodyguardz either... =(
I think it is the digitizer that is comming off, or part of it anyways... the only thing I could find online is this
http://forum.xda-developers.com/showthread.php?t=392301&page=3
Post#27
"--------------------------------------------------------------------------------
Hello again
So
After giving it a lot of thought, i decided to disasamble my phone to see if i can get rid of that stain. I have to say that it was a bit difficult to folow the guide but i finaly opened my cruise.
In the end i realised where was my problem.
The digitizer has 2 components:
A glass layer witch is on the bottom, and a plastic one (on top) witch are keppt together by twosided adhesive tape.
The "stain" was caused by the plastic layer, witch for some reason wasn't staying straight (it had a small bump...).
I figured this out when i pealed this layer from the glass one, witch i shouldn't have done because the layer has a connection with the glass and the small ribbon witch goes into the mb.
So for any of you, if you encounter my problem, better let it that way, cause the alternative will be a new digitizer.
I'll go to the htc service in romania to see how much will they charge me for a new one, and if the amount is to much, i'll try to order one from the web(altho not that many companies ship to my country )
Wish me luck.
LE: I have a question thow
How can you remove the digitizer from the casing ?
I tryed to pull it but i was afraid to damage something (else).
--------------------------------------------------------------"
http://forum.xda-developers.com/attachment.php?attachmentid=100767&d=1216648485
Heres a link to the picture the guy with the polaris took... the HTC black bordered part is still on the screen but there is a film sitting on top of it thats peeling off with the bodyguardz.
This is a cruise polaris and not a raphael but I think this post is referencing the same thing. Does anyone have any advice to give me? My phone is still sitting there with half of the "digitizer" peeled off stuck to the bodyguardz grrrrrrr
bump...........
tassadar898 said:
I was peeling off my bodyguardz screen protector to put on a new one, and the darn thing was so stuck to my screen it took a lot of force to peel it off. As I was pulling it away I noticed that my "screen" seemed to be lifted off my HTC fuze!! After I kept pealing I noticed from the side that there was a film that was peeling off that had adhesive to the screen with the body guardz. I'm too scared to proceed and have left my phone that way.. my question is there a protective film (not counting any sort of screen protector even the one that comes with the fuze) on top of the screen, and that was what was peeling off? Is that film important for the touch screen itself aside from protecting it (or does it keep some part of the screen in place etc etc).
Thanks in advance, the screen does turn on and is still touch sensitive but I'm too scared to peel off the rest of the body guardz that have that "film" come off with it.
Click to expand...
Click to collapse
That has happened to me as well. I'm afraid you'll just have to get another digitizer off ebay.
ughhh!! any help on the assembly?
Spray some of the liquid that came with it on the touchscreen (underneath the bodyguardz screen protector; spray little by little or use your finger) and it should come off with a little less effort without tearing out the screen. That's what I did. Btw, make sure you turn off your phone and dry it before you turn it back on if you do that