Database Info

Flaw in flashing FXZ from 2.3.6 to 2.3.5!!!

OK guys we have a serious flaw in the directions of flashing the FXZ after aplying the OTA 2.3.6. This evening I was coming off of a test build and went to apply the final version and got stuck at the red M. I thought no big deal I'll just follow the instructions listed in the noob thread! So I followed these to a T.
How to flash the FXZ once applying the OTA update and get back to 2.3.5, ONCE YOU UPDATE TO THE OTS 2.3.6 YOU WILL NOT BE ABLE TO FLASH THE 2.3.5 FXZ WITHOUT FOLLOWING THESE STEPS BELOW!!
NOTE: Download this file HERE -
Unzip it and move all the the items in it to the stock fxz. You might get a warning about replacing files, just click OK. NOTE that Windows might not be able to handle the size of the fxz. I have 6 GB RAM but Windows still wasn't able to perform a drag-and-drop through the fxz's zip. I recommend that you just unzip the fxz and then put the files in. (You don't have to rezip it either, RSD Lite will still recognize it and will flash faster).
Click to expand...
Click to collapse
Eveything was going great got to 18/18 and then got this
Invailid CG OTV (CG: cdrom): Invalid SP Data
Invailid CG OTV (CG: webtop): Invalid SP Data
Invailid CG Version (CG: boot):
Invailid CG Version (CG: recovery):
Click to expand...
Click to collapse
I'm like OH $hit!!! my battery is about dead and I'm getting a lil tense and then I remembered reading this thread H2.3.6 FlashBoot Project: and "Invalid CG Version" SOLUTION
Followed the directions and got the phone rebooted! Hopefully some of the developers will take another look at our method and get it corrected so we dont have others going through this and I apologize to all that have already went through this before me and hopefully your phone is working again.
Big thanks to Shaliuno and ri4naire
Guys I know ya'll are swamped but if you find some time could you please take a minute to see where we can correct this isssue and I will get it to the beginners thread once done until then you will have to use this work around to get the phone functional again.
Thanks JRW28

Wait so does that mean we have to flash the edited 2.3.5 fkz and THEN apply Shaliuno's mod?
So the boot.img gets corrupted by the fkz flash?

That is really strange . I will try to do everything as well and see what happens for me.
EDIT- I can't understand why this would happen. I haven't flashed yet but I have checked all the md5sums in the replace.zip with the md5sums of the fxz I've used about 20 times now and they're the same. I'm going to flash it in just a second. Also I'll upload the fxz that I've used all the time but depending on my network (which is usually slow) it could be a while.

cogeary said:
That is really strange . I will try to do everything as well and see what happens for me.
EDIT- I can't understand why this would happen. I haven't flashed yet but I have checked all the md5sums in the replace.zip with the md5sums of the fxz I've used about 20 times now and they're the same. I'm going to flash it in just a second. Also I'll upload the fxz that I've used all the time but depending on my network (which is usually slow) it could be a while.
Click to expand...
Click to collapse
I'm in no way pointing any fingers here just wanted to give a heads up. Cogeary I wouldn't think it would be the FXZ as I flashed mine twice to make sure there wasn't any problems with mine and it is directly from the fastboot files

Yes I completely understand. Some reasons why this is happening are
1- The original files uploaded in the replace.zip may not be the right files
2- The replace.zip is either incomplete or incorrect
3- RSD Lite is playing tricks because it doesn't like us
Out of those, 1 isn't possible because I've used those files many times in flashing 2.3.5 from a 2.3.6 A2. 3 is possible but improbable if you've successfully used RSD Lite before with an A2. 2 is the most plausible.
However I don't believe that any of those options are correct. I just used replace.zip to modify the original fxz and flashed it to my 2.3.6 A2. It just finished booting up.

cogeary said:
Yes I completely understand. Some reasons why this is happening are
1- The original files uploaded in the replace.zip may not be the right files
2- The replace.zip is either incomplete or incorrect
3- RSD Lite is playing tricks because it doesn't like us
Out of those, 1 isn't possible because I've used those files many times in flashing 2.3.5 from a 2.3.6 A2. 3 is possible but improbable if you've successfully used RSD Lite before with an A2. 2 is the most plausible.
However I don't believe that any of those options are correct. I just used replace.zip to modify the original fxz and flashed it to my 2.3.6 A2. It just finished booting up.
Click to expand...
Click to collapse
Wait... Is this problem intermittent? @cogeary How did you get the fkz to work?

farshad525hou said:
Wait... Is this problem intermittent? @cogeary How did you get the fkz to work?
Click to expand...
Click to collapse
I did exactly what the noob thread said to do and it works for me :\

cogeary said:
I did exactly what the noob thread said to do and it works for me :\
Click to expand...
Click to collapse
Huh.. I thought JRW was saying that after following the noob instructions he had the problem flashing.

Yes I did have problems and we've had a few others as well. So why is this intermittent?
I've just verified that my FXZ is working again so I know thy is not the problem? Idk???

I would recommend to anyone looking to update and retain root to do a factory reset and flash the
2.3.5 Edison_etc.zip to get a clean stock phone first. Then root from there and follow the instructions to upgrade. Also, use adb to alter you're mount_ext3.sh or whatever, DON'T USE A ROOT EXPLORER ON THE PHONE, this is what I'm deciding to blame my fate on (I gotta direct my ire somewhere).
Good luck!
Sent from my MB865 using Tapatalk

ri4naire said:
I would recommend to anyone looking to update and retain root to do a factory reset and flash the
2.3.5 Edison_etc.zip to get a clean stock phone first. Then root from there and follow the instructions to upgrade. Also, use adb to alter you're mount_ext3.sh or whatever, DON'T USE A ROOT EXPLORER ON THE PHONE, this is what I'm deciding to blame my fate on (I gotta direct my ire somewhere).
Good luck!
Sent from my MB865 using Tapatalk
Click to expand...
Click to collapse
This problem has nothing to do with root as th one-click works well with 2.3.5 and the new exploit works well on 2.3.6 .
We need to figure whats happening on part 18/18 that is leaving us with the errors

I've flashed back to 2.3.5 and re-updated to 2.3.6 a few times. I haven't had any problems. I used the original FXZ and followed Jim's original instructions to make it work. Perhaps the problem is in the updated FXZ?

SeekerLoki said:
I've flashed back to 2.3.5 and re-updated to 2.3.6 a few times. I haven't had any problems. I used the original FXZ and followed Jim's original instructions to make it work. Perhaps the problem is in the updated FXZ?
Click to expand...
Click to collapse
My FXZ is from the original file and has saved my butt too many times to count and I tried it 3 times last night just to verify that I hadn't somehow corrupted it. Which instructions of Jim's are you referring to. I run out of time last night and 3 hrs sleep is working on me but I'm gonna try some different options after work today as I have a few things I've thought of this morning.

I'm either wrong about who posted it, or I can't find it through all of Jim's post. The steps have been posted and reposted several times. These are the steps I used: http://forum.xda-developers.com/showpost.php?p=22123805&postcount=73 I downloaded the replace.zip and didn't see anything that would cause a problem. I'm no expert by any means. The point of my post was to say that I've flashed back to 2.3.5 several times without a problem.

Could some hardware\software\firmware specific. Or whatever it is.
I followed that guide too, and ended at black screen. So it can work for some phones or for most, but for some not.

SeekerLoki said:
I'm either wrong about who posted it, or I can't find it through all of Jim's post. The steps have been posted and reposted several times. These are the steps I used: http://forum.xda-developers.com/showpost.php?p=22123805&postcount=73 I downloaded the replace.zip and didn't see anything that would cause a problem. I'm no expert by any means. The point of my post was to say that I've flashed back to 2.3.5 several times without a problem.
Click to expand...
Click to collapse
Thanks, as soon as I get a chance this evening I will take a look at the MD5's and compare them to make sure they are correct to what I had used with the replace zip in the nOOb thread just to make sure one isnt off somewhere.

Shaliuno said:
Could some hardware\software\firmware specific. Or whatever it is.
I followed that guide too, and ended at black screen. So it can work for some phones or for most, but for some not.
Click to expand...
Click to collapse
Possibility or it could be that a extra step needs to be included in the replace.zip. that we need to make it work

JRW 28 said:
Thanks, as soon as I get a chance this evening I will take a look at the MD5's and compare them to make sure they are correct to what I had used with the replace zip in the nOOb thread just to make sure one isnt off somewhere.
Click to expand...
Click to collapse
I checked the MD5 sums against the files I have from the update, and they match.

I don't know if this will help or not, im just putting it out there. When i went back to 2.3.5, i replaced the files as it was stated to do. I could not get rsd to work on vista. It would fail every time. I had to use another computer running windows 7. It worked perfectly then.
Sent from my MB865 using xda premium

tmease1 said:
I don't know if this will help or not, im just putting it out there. When i went back to 2.3.5, i replaced the files as it was stated to do. I could not get rsd to work on vista. It would fail every time. I had to use another computer running windows 7. It worked perfectly then.
Click to expand...
Click to collapse
For the record, I too am using windows 7 when I flashed the FXZ.

[Q] Return AT&T Atrix 2 to Stock (2.3.6)?

I am having the same problem with Contacts and with process com.motorola.contacts force closing that many others are having. I had rooted as well as uninstalled bloatware (instead of freezing, yes, I know!). Tried unrooting, reinstalling Yahoo and AT&T apps as suggested, factory resets, everything. Contacts still acts the same; that is, I can get to it but can't edit individual contacts nor get to Contacts Storage. I think it must have something to do with AT&T Address Book, which won't reinstall (says not supported but was there before).
At this point I just want to return Atrix 2 to its stock, 2.3.6 configuration and start all over. Can anyone help me, or is that not "out" yet?

Follow the instructions on flashing the 2.3.5 FXZ listed here (the beginner's guide) and then use the OTA update to get to 2.3.6. Next time make a CWM backup before you try any ROMs! It is inevitable that you'll eventually get stuck in some sort of boot loop.

bmbanker said:
Follow the instructions on flashing the 2.3.5 FXZ listed here (the beginner's guide) and then use the OTA update to get to 2.3.6. Next time make a CWM backup before you try any ROMs! It is inevitable that you'll eventually get stuck in some sort of boot loop.
Click to expand...
Click to collapse
I will try that. It looks pretty complicated...I'll be studying for awhile!

It's not hard at all! Just follow the instructions listed EXACTLY and make sure that your battery is well charged before you do this -- if it dies during the middle of something like this, you could run into a tricky problem.

motocyndi said:
I will try that. It looks pretty complicated...I'll be studying for awhile!
Click to expand...
Click to collapse
It's alot easier than it sounds....and im no pro. I was able to successfully flash 2.3.5 to mine that way the first time around following the instructions in the noob thread.
Atrix 2//RebelROM//Tapatalk 2

so let me get this straight....
I had 2.3.5 rooted. I accepted the OTA update to 2.3.6, so naturally, it un-rooted me, although the superuser is still there. I tried the one click method for 2.3.6 after it came out, as I am a total NOOB and was afraid to try it and screw things up. That doesn't work. I tried to unroot it using the same method. Also didn't work. The superuser is still there and denying permissions.
Soooooooo, I have decided to do the FXZ method in the in the noob/general forum. I'm still unclear and afraid about how to do it. Am I supposed to go through the first 11 steps, then do the "replace" step that is added as a note? Speaking of the added note. It says to "move all the the items in it to the stock fxz". The "stock FXZ" is what i downloaded and did in step 1-11, right? I have searched the forums and this was the best place I could see to ask. Sorry for my extreme NOOBness.
Thanks in advance for helping, or just taking the timpe to read my post!

psdroid said:
I had 2.3.5 rooted. I accepted the OTA update to 2.3.6, so naturally, it un-rooted me, although the superuser is still there. I tried the one click method for 2.3.6 after it came out, as I am a total NOOB and was afraid to try it and screw things up. That doesn't work. I tried to unroot it using the same method. Also didn't work. The superuser is still there and denying permissions.
Soooooooo, I have decided to do the FXZ method in the in the noob/general forum. I'm still unclear and afraid about how to do it. Am I supposed to go through the first 11 steps, then do the "replace" step that is added as a note? Speaking of the added note. It says to "move all the the items in it to the stock fxz". The "stock FXZ" is what i downloaded and did in step 1-11, right? I have searched the forums and this was the best place I could see to ask. Sorry for my extreme NOOBness.
Thanks in advance for helping, or just taking the timpe to read my post!
Click to expand...
Click to collapse
Unzip the stock fxz and copy the extra files into it. Accept any error it may give you. The open rsd and click the "..." Button and find the fxc that you modified and then hook your phone up in Detroit and hit the start button. Should be golden after
Running AtrixBlaze 3 on my Atrix 2.

bmbanker said:
It's not hard at all! Just follow the instructions listed EXACTLY and make sure that your battery is well charged before you do this -- if it dies during the middle of something like this, you could run into a tricky problem.
Click to expand...
Click to collapse
Everything did work like a charm finally; thank you so much for being so helpful, everyone! I feel a little less nooby now.

Thanks!!!
DarkJatrix said:
Unzip the stock fxz and copy the extra files into it. Accept any error it may give you. The open rsd and click the "..." Button and find the fxc that you modified and then hook your phone up in Detroit and hit the start button. Should be golden after
Running AtrixBlaze 3 on my Atrix 2.
Click to expand...
Click to collapse
Downloading FXZ as we speak. i will give an update as soon as I try it out! Thanks again.

IT WORKED!!!!
As the title states, it worked. I downloaded the fxz, replaced the files, ran it, the re-rooted after everything came back up. Then I did the OTA rootkeeper procedure and now I am about to takt the ota. Will let you know if anything goes wrong after that. Thanks again for all the help and encouragement.

psdroid said:
As the title states, it worked. I downloaded the fxz, replaced the files, ran it, the re-rooted after everything came back up. Then I did the OTA rootkeeper procedure and now I am about to takt the ota. Will let you know if anything goes wrong after that. Thanks again for all the help and encouragement.
Click to expand...
Click to collapse
Why not just take the ota then root it with motto fail one click?
Sent from my MB865 using Tapatalk 2 Beta-4

DarkJatrix said:
Why not just take the ota then root it with motto fail one click?
Sent from my MB865 using Tapatalk 2 Beta-4
Click to expand...
Click to collapse
I just wanted to be sure that I wouldn't lose root again if I ever get another ota. If the motto fail incorporates that, I wasn't aware.

Can someone please post a working link for InlineFlashing?

I'm need to have the following, but cannot find a working link. Any ideas?
InlineFlashing_edison_5.5.175.16_cfc_p3_APBP_CID28 5.zip
Thank you.

just use this. you plug your phone into you computer and run the .bat file to return to stock. http://forum.xda-developers.com/showthread.php?t=1539167&page=2

rob219 said:
just use this. you plug your phone into you computer and run the .bat file to return to stock. http://forum.xda-developers.com/showthread.php?t=1539167&page=2
Click to expand...
Click to collapse
Will this work on widows vista? Rsd wont, so thats why I am asking.
Sent from my MB865 using xda premium

tmease1 said:
Will this work on widows vista? Rsd wont, so thats why I am asking.
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
yes, this is made for windows computers and will work. uzip it and run the returntostoxk.bat file it will confirm your phone is connected (you have to be in fastboot mode) and after that just press enter and let it run and complete and youll be back to stock. you have to reroot your phone too, so id just update to the ota 2.6 and then root that, then intall your atrix bootstrap and then the bionic recovery from rom manager. then your ready to flash some roms again.

rob219 said:
yes, this is made for windows computers and will work. uzip it and run the returntostoxk.bat file it will confirm your phone is connected (you have to be in fastboot mode) and after that just press enter and let it run and complete and youll be back to stock. you have to reroot your phone too, so id just update to the ota 2.6 and then root that, then intall your atrix bootstrap and then the bionic recovery from rom manager. then your ready to flash some roms again.
Click to expand...
Click to collapse
I use rsd on my wifes computer because she has windows 7. My computer has vista so try this out next time i go back to stock.
Sent from my MB865 using xda premium

Thanks for the link. I just acquired an ATRIX 2 and cannot upgrade to 2.3.6. It says update failed and read returning to factory helps. Crossing my fingers.

iFalcon said:
Thanks for the link. I just acquired an ATRIX 2 and cannot upgrade to 2.3.6. It says update failed and read returning to factory helps. Crossing my fingers.
Click to expand...
Click to collapse
Dont delete any bloatware and you should be fine with updating to 2.3.6.
Sent from my MB865 using xda premium

tmease1 said:
Dont delete any bloatware and you should be fine with updating to 2.3.6.
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
That was my only guess. I bought it mint from ebay. I'm hoping that is the issue with a bloatwsre getting removed.

Well...so good news and bad news.
This was phone I had purchased from Ebay. I works great. The problem I started with it receiving an update for 2.3.6, but it failed when attempting to update. From what I have read, this could be related bloated getting deleted.
I first attempted to find InlineFlashing_edison_5.5.175.16_cfc_p3_APBP_CID28 5.zip, but wasn't able to find a working link.
I was pointed to using a .bat file by Rob in this thread. Thanks a bunch Rob. All went well; however, when attempting to perfrom the update to 2.3.6 it now gives me an out of system memory error. It doesn't even start to download the update...odd. It then ask me to factory reset. however, the factory reset then takes me back into a fastboot mode.
Any ideas of next steps? Do I need to attempt finding the original InlineFlashing file? If so, any idea where to find it?
Thanks everyone! I appreciate the help.

here you go.
this is one i posted last week. here is the link to the thread. http://forum.xda-developers.com/showthread.php?t=1608879
here is a direct link to the file i uploaded, if it does not work let me know and i will re-upload it.
keep in mind that this is what you need to come FROM 2.3.6 back to stock 2.3.5
http://dl.dropbox.com/u/57012903/Inl...PBP_CID285.zip
Matt

matt99017d said:
here you go.
this is one i posted last week. here is the link to the thread. http://forum.xda-developers.com/showthread.php?t=1608879
here is a direct link to the file i uploaded, if it does not work let me know and i will re-upload it.
keep in mind that this is what you need to come FROM 2.3.6 back to stock 2.3.5
http://dl.dropbox.com/u/57012903/Inl...PBP_CID285.zip
Matt
Click to expand...
Click to collapse
Hi Matt -
Would this work if I'm already on 2.3.5 and need to restore back to default or MUST I be on 2.3.6 first? I can't get to 2.3.6 right now due to a failed update.

for that, im not sure. im under the impression that it's fine.
at this point its better that what you got. {i think}
let me search around a little bit and see if i can get a better answer

matt99017d said:
for that, im not sure. im under the impression that it's fine.
at this point its better that what you got. {i think}
let me search around a little bit and see if i can get a better answer
Click to expand...
Click to collapse
Thanks so much. This is a great community and appreciate everyones input!

Here you are. Just EXTRACT and point RSD LITE to the XML file inside the extracted folder. Happy flashing
MD5 = 2c25abaee9342f37e91d3318d64e2557
http://jumbofiles.com/az0dpni27pfi
http://netload.in/datei9n4tMznje4/InlineFlashing_edison_5.5.175.16_cfc_p3_APBP_CID285.xml.zip.htm
http://depositfiles.com/files/gu6lqptbd

[HOW TO] get your AT&T phone onto ICS Leak #1 - Process Updated 11/11/2012

Ok everyone the leak is here!
I have tested it all day and it works very well, very smooth.
Don't post here if you are having issues with this leak itself. If you have issues with the process then by all means post in here with the issue.
So this is a how to with all the files needed being posted in here as well.
1) FXZ back to full 100% stock 2.3.6, ONLY if you were ON GB to begin with!!! If you started on the ICS OTA, then do not attempt this, you will Brick!!!
2) Download the file below called Blur_Version.55.13.25.MB865.ATT.en.US.zip and copy it to the root of your SDcard (it does not matter how it gets there)
3) Boot into stock recovery (power off, then while the phone is off hold both the Vol up and Vol down button, right in the middle, then hold the power button until you see the boot menu, then highlight recovery with the Vol down button, and select with the Vol up button).
4) Get to the recovery menu (you should see an android with an exclamation point, at this point) by holding the Vol up and Vol down button, then the menu will pop up, select install from /sdcard, then select the Blur file from the root of your sdcard, and tell it to flash it. You will flash a new recovery and see a droid laying down with it's belly open and red exclamation point, this is normal, just hit both Vol up and Vol down again to get the menu and select to flash from sdcard again and choose the same Blur file as before.
5) Boot into ICS, and root using the zip below, you will connect the phone to your computer and use the root.bat (unzip this folder to your desktop) for windows and root.sh for linux/mac.
Files:
ICS OTA:
http://www.androidfilehost.com/main...man/Blur_Version.55.13.25.MB865.ATT.en.US.zip
MD5sum: 5bd615584406ba726ad7d49a225dd6f1
ICS root:
http://www.androidfilehost.com/main/Motorola_ATRIX_2_Developers/jimbridgman/A2_ICS_root.zip
MD5sum: 7cd5a0896a8be580b5a379dff408d0ad
Fxz back to 2.3.5 from ICS, ONLY USE THIS METOD:
http://forum.xda-developers.com/showthread.php?t=1805975
Please do not post anything in this thread but install issues. DO NOT ASK IF YOU SHOULD UN-ROOT OR IF YOU CAN STAY ROOTED, OR IF YOU DID THE FXZ YESTERDAY ARE YOU OK. Follow the instructions above, or don't if you don't you will NOT get support.
Note: I am not responsible if you bootloop. brick or wreck your phone, or if your girl leaves you cause you play with your phone too much because of this. You are doing this of your own free will!
You will most likely not be able to get the "real" OTA while on this leak, and since the BL is going to be the same, you may not be able to install the "real" OTA at all, so when it comes out you will need to give the devs time to make it work for anyone who installed this. Again no complaints about this either, your dev team will find a way to make it work. You just need to give us the time needed when it comes out if there are any issues.

Anyone have a link to the 2.3.5 fkz? All the links I've checked are down!

WOO! Awesome!

farshad525hou said:
Anyone have a link to the 2.3.5 fkz? All the links I've checked are down!
Click to expand...
Click to collapse
Here try this one:
http://sbf.droid-developers.org/edison/list.php

THANKS! Also should the OTA be bigger than 29mb? NEVER MIND

After install this ICS leak, can we come back to 2.3.6 using Atrix2Bootstrap?

Quick question.. If I fkz from 2.3.6 wont we get the "invalid CG version error"? There's a thread to fix that but it says it takes stock recovery away (which is needed to flash the OTA). How do i downgrade?

farshad525hou said:
Quick question.. If I fkz from 2.3.6 wont we get the "invalid CG version error"? There's a thread to fix that but it says it takes stock recovery away (which is needed to flash the OTA). How do i downgrade?
Click to expand...
Click to collapse
I FXZ'd from 2.3.6 to 2.3.5 so I don't know about such a problem.
Sent from my MB865 using xda app-developers app

@farshad525hou
This is what I used: http://forum.xda-developers.com/showpost.php?p=20389449&postcount=1
Towards the bottom of the post there is an addition step to those who are already on 2.3.6. Just copy the files over to the fkz file, then it should work.

sjc807 said:
@farshad525hou
This is what I used: http://forum.xda-developers.com/showpost.php?p=20389449&postcount=1
Towards the bottom of the post there is an addition step to those who are already on 2.3.6. Just copy the files over to the fkz file, then it should work.
Click to expand...
Click to collapse
THANK YOU!!!! Lo lI would thank you but, i've already hit my 8 thanks daily limit....

How do we get it on our phone if we are running stock 2.3.6? (Unrooted)
Sent from my MB865 using xda premium

question
Done:
Thank you so much Jim. You are the best.
Now if only I could get my Nexus 7 on Thursday , on my day off, I would have everything

Help me!
My MD5 is matched with 5bd615584406ba726ad7d49a225dd6f1

PhoenixNghi said:
Help me!
My MD5 is matched with 5bd615584406ba726ad7d49a225dd6f1
Click to expand...
Click to collapse
You are not 100% stock.... follow my directions, or it will not work... and don't install bootstrap, that is why your logwrap failed verification.
Sent from my SAMSUNG-SGH-I747 using xda premium

I can't wait till I get my phone back! ICS, FTW!!!!

283ish MB
Sent from my MB865 using xda app-developers app

Oooohhh....yeahhh baby,that's what I am talking about,got it :good::good: I wiped it and I did not come across any issues at all.
Thanks so much.

Wow...feel like a complete noob. I've used RSD Lite for my X2 plenty of times with SBF files. Don't know how to use this FXZ file though. Read other threads as well and dont know what to do with this 2.3.5 FXZ file? Been rooted on 2.3.6 for a month or so...still new to this device.

DX2Trip said:
Wow...feel like a complete noob. I've used RSD Lite for my X2 plenty of times with SBF files. Don't know how to use this FXZ file though. Read other threads as well and dont know what to do with this 2.3.5 FXZ file? Been rooted on 2.3.6 for a month or so...still new to this device.
Click to expand...
Click to collapse
Go here:
http://forum.xda-developers.com/showthread.php?t=1396650
There is a section on the fxz in the above noob thread, also look just a little lower there is also a patch zip file to apply to the fxz.
Sent from my SAMSUNG-SGH-I747 using xda premium

Dx, you can find very good instructions on how to flash the fxz in this thread: http://forum.xda-developers.com/showthread.php?t=1396650
Sent from my MB865 using xda premium

Atrix 2 ics leak #2 stuck on cm10 boot!

Okay, so here's a long story short. I flashed AT&T ICS leak #2 when I first got my replacement due to a brick. I ran SCV7 for a week or so and decided to try out CM10. I restored my backup of stock/rooted backup. Uninstalled highjacks, packages and app (bootmenu) itself. I then installed our OG A2 bootstrap, installed fine, installed CM10, played around with it for awhile. Realized I didnt reinstall the OG A2 Bootstrap so went ahead and did that. (without booting into recovery yet) I then later in the day decided to REBOOT my phone to only find me stuck on the CM10 boot animation. I battery pulled, plugged in to see if any recovery would show, none, just the battery charge percentage. I then battery pulled again, got into stock recovery, tried a data and cache wipe to no effect. My problem is, there is NO FXZ for the AT&T leak #2, I have no recovery besides stock and the only thing I can do is take my 32GB SD card out and add/delete files/everything. I saddly did not make a copy of the system.img but was wondering if anyone else possibly did? This would be greatly appreciated as I am stuck with a soft brick until then or a new FXZ to work with AT&T leak #2. Any suggestions or help is very much appreciated. Thanks all for reading and I'm praying for a miracle in my phone right about now lol!

DX2Trip said:
Okay, so here's a long story short. I flashed AT&T ICS leak #2 when I first got my replacement due to a brick. I ran SCV7 for a week or so and decided to try out CM10. I restored my backup of stock/rooted backup. Uninstalled highjacks, packages and app (bootmenu) itself. I then installed our OG A2 bootstrap, installed fine, installed CM10, played around with it for awhile. Realized I didnt reinstall the OG A2 Bootstrap so went ahead and did that. (without booting into recovery yet) I then later in the day decided to REBOOT my phone to only find me stuck on the CM10 boot animation. I battery pulled, plugged in to see if any recovery would show, none, just the battery charge percentage. I then battery pulled again, got into stock recovery, tried a data and cache wipe to no effect. My problem is, there is NO FXZ for the AT&T leak #2, I have no recovery besides stock and the only thing I can do is take my 32GB SD card out and add/delete files/everything. I saddly did not make a copy of the system.img but was wondering if anyone else possibly did? This would be greatly appreciated as I am stuck with a soft brick until then or a new FXZ to work with AT&T leak #2. Any suggestions or help is very much appreciated. Thanks all for reading and I'm praying for a miracle in my phone right about now lol!
Click to expand...
Click to collapse
Hey, and sort of welcome back...
But I hate to be the bearer of bad, bad news... you have a softbrick, and there is NOTHING you can do.
Next time, read everything in an OP... LOL, look who I am telling this to....
The CM10 installs come with their own CWM built in, and flashing bootstrap is what bootlooped you, so after you get another warranty replacement (yes, you HAVE to do this), I would install leak #1 ONLY, then flash cm10 with bootstrap, then do not reinstall any boot hijacks or CWM "like" recovery (bootmenu), because all you have to do it hit the vol down button right as you see the blue led flash during the M dual core logo.

Or enter the CM10 recovery menu and so on and so forth.
This is how I got out of a cm10 boot-loop.
I just restored from bootmenu backup via adb.

tcf38012 said:
Or enter the CM10 recovery menu and so on and so forth.
This is how I got out of a cm10 boot-loop.
I just restored from bootmenu backup via adb.
Click to expand...
Click to collapse
he can't, he installed bootstrap while on cm10m, so he can't get to cwm anymore.

Scratch that ----- Deleted

Well, thanks everyone. Specially you jim. Anyone wanna throw me an fxz they think MIGHT work for the second ICS leak? I'm willing to take the risk since I have nothing else to lose. Ill be most likely calling AT&T tomorrow and give some excuse. Soft brick or hard brick...Ill get a replacement...
Sent From My Eclipsed DROID X2!

DX2Trip said:
Well, thanks everyone. Specially you jim. Anyone wanna throw me an fxz they think MIGHT work for the second ICS leak? I'm willing to take the risk since I have nothing else to lose. Ill be most likely calling AT&T tomorrow and give some excuse. Soft brick or hard brick...Ill get a replacement...
Sent From My Eclipsed DROID X2!
Click to expand...
Click to collapse
I will get with alteredlikeness and see if we can possibly think of something together on this one. The first thought would be to try an mearet/searet fxz for 2.3.6 since they can fxz back with out any mods to thier 2.3.6 or 2.3.5 fxz from thier ICS leaks, but I am thinking that will still brick you, but interested to see anyhow.
So I will see if alteredlikeness and I can think of some other way to try. He or I will PM you either way.

jimbridgman said:
I will get with alteredlikeness and see if we can possibly think of something together on this one. The first thought would be to try an mearet/searet fxz for 2.3.6 since they can fxz back with out any mods to thier 2.3.6 or 2.3.5 fxz from thier ICS leaks, but I am thinking that will still brick you, but interested to see anyhow.
So I will see if alteredlikeness and I can think of some other way to try. He or I will PM you either way.
Click to expand...
Click to collapse
he can flash just a system. img from ics though, And that should recover it
Sent from my MB865 using xda premium

lkrasner said:
he can flash just a system. img from ics though, And that should recover it
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
You know, I was seeing in recovery how youbcan flash an update through sd AND system which has a lost and found folder and recovery folder. Dont know if this is of any info but either way because I wouldnt know how to put anything in system since I cant seem to get adb to recognize or moto-fastboot...I'm in a very confused state of mind and almost came to the point of hard brick but I refuse. I'll leave it up to ya devs. Thanks againg everyone.
Sent from my MB870 using xda premium

i have same issue , any way to flash system img, and where whould i get system img from? i have preiviously backed up thru cwm

justdrew said:
i have same issue , any way to flash system img, and where whould i get system img from? i have preiviously backed up thru cwm
Click to expand...
Click to collapse
Try following this:
http://forum.xda-developers.com/showthread.php?t=1926873

First Softbrick it seems In Trouble
jimbridgman said:
Try following this:
http://forum.xda-developers.com/showthread.php?t=1926873
Click to expand...
Click to collapse
Guys need your urgent help i am into a trouble what is it called technically may be a Soft brick but this is what has happened.
I was trying the Magic mod the installation went superb booted the phone it worked properly and then i used the bootstrap :silly: and tried starting the phone in recovery after which my phone is now stuck at magic mod boot animation. PLEASE HELP.
I am upto a point where have installed drivers latest rsd lite 6.0 ready with the extracted fxz 6.7.2_EDEM-18-SEARET_cfc.xml but phone is not showing up in rsd lite so that i can flash my phone. Phone says USB connected in AP Fastboot mode have a look at the attachment of my desktop. Please HELP guys....
Thanks & Regards,
Beginner Android (Ravi D)

havent you just posted this in the any question answered here thread and getting help there ??

Wow, almost forgot I made this thread lol. But sounds like your drivers need a good updating. Reboot PC after updating and try again is all I can say. Hope this helps.
Sent from my MB865 using xda premium