Database Info

Can someone please post a working link for InlineFlashing?

I'm need to have the following, but cannot find a working link. Any ideas?
InlineFlashing_edison_5.5.175.16_cfc_p3_APBP_CID28 5.zip
Thank you.

just use this. you plug your phone into you computer and run the .bat file to return to stock. http://forum.xda-developers.com/showthread.php?t=1539167&page=2

rob219 said:
just use this. you plug your phone into you computer and run the .bat file to return to stock. http://forum.xda-developers.com/showthread.php?t=1539167&page=2
Click to expand...
Click to collapse
Will this work on widows vista? Rsd wont, so thats why I am asking.
Sent from my MB865 using xda premium

tmease1 said:
Will this work on widows vista? Rsd wont, so thats why I am asking.
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
yes, this is made for windows computers and will work. uzip it and run the returntostoxk.bat file it will confirm your phone is connected (you have to be in fastboot mode) and after that just press enter and let it run and complete and youll be back to stock. you have to reroot your phone too, so id just update to the ota 2.6 and then root that, then intall your atrix bootstrap and then the bionic recovery from rom manager. then your ready to flash some roms again.

rob219 said:
yes, this is made for windows computers and will work. uzip it and run the returntostoxk.bat file it will confirm your phone is connected (you have to be in fastboot mode) and after that just press enter and let it run and complete and youll be back to stock. you have to reroot your phone too, so id just update to the ota 2.6 and then root that, then intall your atrix bootstrap and then the bionic recovery from rom manager. then your ready to flash some roms again.
Click to expand...
Click to collapse
I use rsd on my wifes computer because she has windows 7. My computer has vista so try this out next time i go back to stock.
Sent from my MB865 using xda premium

Thanks for the link. I just acquired an ATRIX 2 and cannot upgrade to 2.3.6. It says update failed and read returning to factory helps. Crossing my fingers.

iFalcon said:
Thanks for the link. I just acquired an ATRIX 2 and cannot upgrade to 2.3.6. It says update failed and read returning to factory helps. Crossing my fingers.
Click to expand...
Click to collapse
Dont delete any bloatware and you should be fine with updating to 2.3.6.
Sent from my MB865 using xda premium

tmease1 said:
Dont delete any bloatware and you should be fine with updating to 2.3.6.
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
That was my only guess. I bought it mint from ebay. I'm hoping that is the issue with a bloatwsre getting removed.

Well...so good news and bad news.
This was phone I had purchased from Ebay. I works great. The problem I started with it receiving an update for 2.3.6, but it failed when attempting to update. From what I have read, this could be related bloated getting deleted.
I first attempted to find InlineFlashing_edison_5.5.175.16_cfc_p3_APBP_CID28 5.zip, but wasn't able to find a working link.
I was pointed to using a .bat file by Rob in this thread. Thanks a bunch Rob. All went well; however, when attempting to perfrom the update to 2.3.6 it now gives me an out of system memory error. It doesn't even start to download the update...odd. It then ask me to factory reset. however, the factory reset then takes me back into a fastboot mode.
Any ideas of next steps? Do I need to attempt finding the original InlineFlashing file? If so, any idea where to find it?
Thanks everyone! I appreciate the help.

here you go.
this is one i posted last week. here is the link to the thread. http://forum.xda-developers.com/showthread.php?t=1608879
here is a direct link to the file i uploaded, if it does not work let me know and i will re-upload it.
keep in mind that this is what you need to come FROM 2.3.6 back to stock 2.3.5
http://dl.dropbox.com/u/57012903/Inl...PBP_CID285.zip
Matt

matt99017d said:
here you go.
this is one i posted last week. here is the link to the thread. http://forum.xda-developers.com/showthread.php?t=1608879
here is a direct link to the file i uploaded, if it does not work let me know and i will re-upload it.
keep in mind that this is what you need to come FROM 2.3.6 back to stock 2.3.5
http://dl.dropbox.com/u/57012903/Inl...PBP_CID285.zip
Matt
Click to expand...
Click to collapse
Hi Matt -
Would this work if I'm already on 2.3.5 and need to restore back to default or MUST I be on 2.3.6 first? I can't get to 2.3.6 right now due to a failed update.

for that, im not sure. im under the impression that it's fine.
at this point its better that what you got. {i think}
let me search around a little bit and see if i can get a better answer

matt99017d said:
for that, im not sure. im under the impression that it's fine.
at this point its better that what you got. {i think}
let me search around a little bit and see if i can get a better answer
Click to expand...
Click to collapse
Thanks so much. This is a great community and appreciate everyones input!

Here you are. Just EXTRACT and point RSD LITE to the XML file inside the extracted folder. Happy flashing
MD5 = 2c25abaee9342f37e91d3318d64e2557
http://jumbofiles.com/az0dpni27pfi
http://netload.in/datei9n4tMznje4/InlineFlashing_edison_5.5.175.16_cfc_p3_APBP_CID285.xml.zip.htm
http://depositfiles.com/files/gu6lqptbd

i am new here and i am in big problem for my infuse 4g after install custom rom

i have rooted my infuse 4g using odin using this thread http://forum.xda-developers.com/showthread.php?t=1613523. but after installing this my phone was okay, then after i took backup thru cwm, after that i installed rom of jellybean and after installing it my phone cant start, so i took battery out and again go to recovery mod and try to restore it but i m facing same problem, my phone not starting, even usb mount also not working,
i have format my infuse again and try to do it with odin again but it shows that
E: failed to mount/dbdata(file exist)
E: copy_dbdate_media:cant mount /dbdate
your storage not prepared yet, please use UI menu for format and reboot action.
media files copy failed.
please help me. i m worried about it coz just yesterday i bought it new. so please please help me.
i dont know what is UI menu also.

If you had read the OP, you can't go directly to JB, you have to be on ICS, then flash JB.
Which option did you use from that page? I've used "I997UCLB3-root.rar" many times. But sometimes it gets stuck and I have to pull the usb cable and start over.
So, use I997UCLB3-root.rar, to go back to stock GB. Then flash an ICS rom, reboot. Then flash a JB rom.

Truckerglenn said:
If you had read the OP, you can't go directly to JB, you have to be on ICS, then flash JB.
Which option did you use from that page? I've used "I997UCLB3-root.rar" many times. But sometimes it gets stuck and I have to pull the usb cable and start over.
So, use I997UCLB3-root.rar, to go back to stock GB. Then flash an ICS rom, reboot. Then flash a JB rom.
Click to expand...
Click to collapse
Thank you for your reply but i have tried directly to go to jellybean from GB 2.3.6 and i also tried now to root again using I997UCLB3-root.rat but then also my phone giving same error that E: cant mount and samsung logo come only

huseniezzaz said:
Thank you for your reply but i have tried directly to go to jellybean from GB 2.3.6 and i also tried now to root again using I997UCLB3-root.rat but then also my phone giving same error that E: cant mount and samsung logo come only
Click to expand...
Click to collapse
Flashing JB is a big leap. Some reading, specially when you are new, could have saved you the trouble. But well, now is time to learn the hard way.
Download any uclb3 back to stock pack, either Odin or heimdall. Put your phone in download mode:
1) take out battery and place it back.
2) while holding vol + & - , connect your phone with a usb cable already inserted into the Pc.
Once in download mode, see if your phone is detected by odin or heimdall. If not you may need to install the drivers.
When all is ready, hit start.
*you probably don't have GB bootloaders. That will cause rainbows in your recovery when flashing ics and jb. If you feel you cant live with them, you will need to flash them.*
To flash jellybean, 1st flash any ics rom following directions coming from GB in the OP. Once you have blue recovery, flash JB with the directions in the rom OP.
Sent from my sweet & buttery Infuse

huseniezzaz said:
Thank you for your reply but i have tried directly to go to jellybean from GB 2.3.6 and i also tried now to root again using I997UCLB3-root.rat but then also my phone giving same error that E: cant mount and samsung logo come only
Click to expand...
Click to collapse
read this, should help
http://forum.xda-developers.com/showthread.php?t=1776129
This too
http://forum.xda-developers.com/showthread.php?t=1437548

Thank you thank you thank you
andros11 said:
Flashing JB is a big leap. Some reading, specially when you are new, could have saved you the trouble. But well, now is time to learn the hard way.
Download any uclb3 back to stock pack, either Odin or heimdall. Put your phone in download mode:
1) take out battery and place it back.
2) while holding vol + & - , connect your phone with a usb cable already inserted into the Pc.
Once in download mode, see if your phone is detected by odin or heimdall. If not you may need to install the drivers.
When all is ready, hit start.
*you probably don't have GB bootloaders. That will cause rainbows in your recovery when flashing ics and jb. If you feel you cant live with them, you will need to flash them.*
To flash jellybean, 1st flash any ics rom following directions coming from GB in the OP. Once you have blue recovery, flash JB with the directions in the rom OP.
Sent from my sweet & buttery Infuse
Click to expand...
Click to collapse
I got my phone back. its working in 2.3.6 very nicely once again. thank you so much for response. i am very happy to see my phone start and i am smiling after 3 hours. huh. now i rooted it with odin I997UCLB3-CWM-root-deodex-extras.rar. now can you please tell me how can i install JB? i m curiously waiting to JB in my infuse. please make it JB.

huseniezzaz said:
I got my phone back. its working in 2.3.6 very nicely once again. thank you so much for response. i am very happy to see my phone start and i am smiling after 3 hours. huh. now i rooted it with odin I997UCLB3-CWM-root-deodex-extras.rar. now can you please tell me how can i install JB? i m curiously waiting to JB in my infuse. please make it JB.
Click to expand...
Click to collapse
The first link I posted for you will walk you through it. Read all the instructions, re-read, look up anything you don't understand, and then follow the directions.

huseniezzaz said:
I got my phone back. its working in 2.3.6 very nicely once again. thank you so much for response. i am very happy to see my phone start and i am smiling after 3 hours. huh. now i rooted it with odin I997UCLB3-CWM-root-deodex-extras.rar. now can you please tell me how can i install JB? i m curiously waiting to JB in my infuse. please make it JB.
Click to expand...
Click to collapse
As others mentioned, you first need to install an ICS ROM, like CM9 or Uniporn. The first time you flash you will prob get stuck in a boot loop and will need to use the three finger method to get back to recovery. In case you don't know what that means, you hold the volume keys and power button to turn phone on and then release only the power button when the Samsung logo shows. When u get back to recovery, flash the same ROM a second time and then it will boot.
You will now have blue recovery so you can flash the jb ROM of choice by following the method in the OP for that ROM. Remember to pull out the external sdcard if you have one.
Also, as others have mentioned, you may not have GB bootloaders. To get them, go to the "ISET infuse everything thread" which is stickied in the dev section. You will find Odin and Heimdall packages which have the bootloaders there. Be very careful when installing bootloaders (test usb with a kernel or something less dangerous first) bc if it fails while trying to flash the bootloaders, it can hard brick your phone. And then thank bigjoe for putting together the ISET thread so all infuse users can find everything we need in one place.
Sent from my SGH-I997 using xda app-developers app

Thank you thank you thank you
benbos_06 said:
As others mentioned, you first need to install an ICS ROM, like CM9 or Uniporn. The first time you flash you will prob get stuck in a boot loop and will need to use the three finger method to get back to recovery. In case you don't know what that means, you hold the volume keys and power button to turn phone on and then release only the power button when the Samsung logo shows. When u get back to recovery, flash the same ROM a second time and then it will boot.
You will now have blue recovery so you can flash the jb ROM of choice by following the method in the OP for that ROM. Remember to pull out the external sdcard if you have one.
Also, as others have mentioned, you may not have GB bootloaders. To get them, go to the "ISET infuse everything thread" which is stickied in the dev section. You will find Odin and Heimdall packages which have the bootloaders there. Be very careful when installing bootloaders (test usb with a kernel or something less dangerous first) bc if it fails while trying to flash the bootloaders, it can hard brick your phone. And then thank bigjoe for putting together the ISET thread so all infuse users can find everything we need in one place.
Sent from my SGH-I997 using xda app-developers app
Click to expand...
Click to collapse
Thank you so much, i have flashed JB successfully and GAPPs also. thank you once again. i followed your method and its very easy. first CWM was red i flash JB and after that i pull battery and start CWM at that time it was Blue and i flashed, now its installed.

One more HAPPY INFUSE OWNER.

Is this forum group great, or what!!!!!!

benbos_06 said:
As others mentioned, you first need to install an ICS ROM, like CM9 or Uniporn. The first time you flash you will prob get stuck in a boot loop and will need to use the three finger method to get back to recovery. In case you don't know what that means, you ...
Click to expand...
Click to collapse
I think if you don't know what "that" means...it means you have not read anything you probably need to read on this forum. and probably should not even be thinking about JB let alone trying to flash it.
No slight on you benbos_06, I thought it was funny reading uninformed posts about "rainbow colors" in their their recovery a few months ago...now it's almost kind of sad to see the uninformed trying to go JB...and needing double flash and 3 finger to recovery detailed in step by step instructions. Jeeze!!! That's a little scary.
Sent from a de-FUNKt Infuse

Smokestack360 said:
I think if you don't know what "that" means...it means you have not read anything you probably need to read on this forum. and probably should not even be thinking about JB let alone trying to flash it.
No slight on you benbos_06, I thought it was funny reading uninformed posts about "rainbow colors" in their their recovery a few months ago...now it's almost kind of sad to see the uninformed trying to go JB...and needing double flash and 3 finger to recovery detailed in step by step instructions. Jeeze!!! That's a little scary.
Sent from a de-FUNKt Infuse
Click to expand...
Click to collapse
+ 100... right on, Smoke !!

[Q] maybe i brick my phone

i have a motorola atrix 2 at&t(MB865).my phone was 2.3.6
1. I try to flash this firmware 5.5.1-EDEM-28-37-MEARET_cfc.xml.zip from this site http://sbf.droid-developers.org/edison/list.php with rsd.at 7/20 rsd was writting fail.i tried again with same result.after this my phone had problem with boot.the only method for boot was "vol down"+"vol up"+"power" and after i was pressing "Normal powerup".after all these my phone booted normal and worked normal.
2.after i flashed the Blur_Version.55.13.25.MB865.ATT.en.US.zip (ics) from this http://forum.xda-developers.com/showthread.php?t=1779968 and my phone was working normal but with the same problem with the boot.
3.after i tried to use this utillity http://forum.xda-developers.com/showthread.php?t=1805975 .this process had some failure and after this my phone is unable to boot.
with "vol down"+"vol up"+"power" i can choose normal power up, but phone stucks at boot image.in addition i can choose recovery and phone boots at recovery mode.i choose to update from sd with this file Blur_Version.55.13.25.MB865.ATT.en.US.zip but my phone writes that its unable to flash this.
4.after i try to flash InlineFlashing_edison_5.5.175.16_cfc_p3_APBP_CID28 5.zip with rsd.the rsd wrote fail at 3/20 in addition i use the replace.zip with the same result.
5.after i try again the 3rd step with same results.
can anyone help me?

This whole mess started when you tried to flash MEARET firmware on your AT&T phone. NEVER mix firmware!
And trying recovery at this point is not going to work, as the ICS zip is just a large patch file for 2.3.6. And since it failed on the fxz, a portion of your system is missing so ICS won't install. You need to fxz back.
What step is the script falling at? A screenshot would be helpful.
And for the future, please post questions in the Q&A form.
Sent from my SAMSUNG-SGH-I727 using xda premium

you mean at 3rd step?
sorry.please move this thread at q&a

Yes the script from step three is what's going to save you here.
But we need to know where it's failing at.
Sent from my SAMSUNG-SGH-I727 using xda premium

i can see that problem is with cbt, recovey and cdrom partition.

Uh oh.
Which ICS version did you install? Please show need the thread.
I need to know which leak it was.
Sent from my SAMSUNG-SGH-I727 using xda premium

Blur_Version.55.13.25.MB865.ATT.en.US.zip

Well I hate to tell you man. But you are soft bricked until we find an fxz for ICS.
Recovery and cdrom are failing because cdt.bin isn't flashing. And we haven't found a fix for this yet.
Although the strange thing is that this shouldn't be happening on the first leak... but it is...
So you're bricked mate.
Sent from my SAMSUNG-SGH-I727 using xda premium

ok, i will wait.
thanks.
but please explain to me.i had a motorola a1200 and a siemens sx1.when i flashed a firmware, all the flash memory erased and new data wrote at flash.if i had bootloader, all was fine.the only method to brick a phone was to replace the battery when flash the bootloader(or flash false bootloader).
at A2, why when i write a new bootloader and new mbr(and partition table?) is necessary to flash the same or newer edition of firmware?this is because bootloader is locked?
i thought when i flash a new firmware, all the flash memory erased and writes new data(at the begining the bootloader, after mbr with partition table, after the image(i think this is the kernel of linux) and all other the data)

macnick said:
i have a motorola atrix 2 at&t(MB865).my phone was 2.3.6
1. I try to flash this firmware 5.5.1-EDEM-28-37-MEARET_cfc.xml.zip from this site http://sbf.droid-developers.org/edison/list.php with rsd.at 7/20 rsd was writting fail.i tried again with same result.after this my phone had problem with boot.the only method for boot was "vol down"+"vol up"+"power" and after i was pressing "Normal powerup".after all these my phone booted normal and worked normal.
2.after i flashed the Blur_Version.55.13.25.MB865.ATT.en.US.zip (ics) from this http://forum.xda-developers.com/showthread.php?t=1779968 and my phone was working normal but with the same problem with the boot.
3.after i tried to use this utillity http://forum.xda-developers.com/showthread.php?t=1805975 .this process had some failure and after this my phone is unable to boot.
with "vol down"+"vol up"+"power" i can choose normal power up, but phone stucks at boot image.in addition i can choose recovery and phone boots at recovery mode.i choose to update from sd with this file Blur_Version.55.13.25.MB865.ATT.en.US.zip but my phone writes that its unable to flash this.
4.after i try to flash InlineFlashing_edison_5.5.175.16_cfc_p3_APBP_CID28 5.zip with rsd.the rsd wrote fail at 3/20 in addition i use the replace.zip with the same result.
5.after i try again the 3rd step with same results.
can anyone help me?
Click to expand...
Click to collapse
Use rsdlite and flash the Asian or Chinese stock firmware worked for me when I had this issue now I'm running 4.1.1 cm10 jb and its awesome!
If this works for you hit my thanks button
P.s phone must be in fast boot mode
Sent from my MB865 using XDA Premium HD app

Code:
whiteboi-hakz
can you tell to me which firmware you mean? and where i can find.
Code:
Fall of Enosis
i forget to tell you that i did the ics ota update from at&t.
so maybe i have the same problem with others...

macnick said:
Code:
whiteboi-hakz
can you tell to me which firmware you mean? and where i can find.
Code:
Fall of Enosis
i forget to tell you that i did the ics ota update from at&t.
so maybe i have the same problem with others...
Click to expand...
Click to collapse
http://sbf.droid-developers.org/edison/list.php
There is the firmware you wanted dude
Download retail Chinese
Sent from my MB865 using XDA Premium HD app

macnick said:
Code:
Fall of Enosis
i forget to tell you that i did the ics ota update from at&t.
so maybe i have the same problem with others...
Click to expand...
Click to collapse
If you did the OTA ICS update you WILL NOT be able to flash the FXZ back. We have no way out of this right now. And if you are bootlooping or stuck on the splash screen then you are bricked. Sorry mate.
Please read these threads:
http://forum.xda-developers.com/showthread.php?t=1897042
http://forum.xda-developers.com/showthread.php?t=1882335
whiteboi-hakz said:
http://sbf.droid-developers.org/edison/list.php
There is the firmware you wanted dude
Download retail Chinese
Sent from my MB865 using XDA Premium HD app
Click to expand...
Click to collapse
Whiteboi, thanks for your consideration of others but PLEASE, research before you try to help others. For one thing, he is on an MB865 AT&T phone and therefore MUST download the firmware for an AT&T phone. The international versions of the A2 are completely different, including radio, WiFi and the like. NEVER mix firmwares.
Also, he already flashed international firmware which is what got him into this predicament in the first place. He also installed the OTA update for ICS for which there is NO GOING BACK. Read the threads I gave him and educate yourself man.
I applaud you generosity, but if he wasn't already bricked, your advice would have surely/quite possibly bricked him. Be careful man.
Read, read, read!

Fall of Enosis said:
If you did the OTA ICS update you WILL NOT be able to flash the FXZ back. We have no way out of this right now. And if you are bootlooping or stuck on the splash screen then you are bricked. Sorry mate.
Please read these threads:
http://forum.xda-developers.com/showthread.php?t=1897042
http://forum.xda-developers.com/showthread.php?t=1882335
Whiteboi, thanks for your consideration of others but PLEASE, research before you try to help others. For one thing, he is on an MB865 AT&T phone and therefore MUST download the firmware for an AT&T phone. The international versions of the A2 are completely different, including radio, WiFi and the like. NEVER mix firmwares.
Also, he already flashed international firmware which is what got him into this predicament in the first place. He also installed the OTA update for ICS for which there is NO GOING BACK. Read the threads I gave him and educate yourself man.
I applaud you generosity, but if he wasn't already bricked, your advice would have surely/quite possibly bricked him. Be careful man.
Read, read, read!
Click to expand...
Click to collapse
Dude it works and he can then reflash his fw so what's the big deal the one I bricked was at&t non international and that method worked great but I'll take your advice man
Sent from my MB865 using XDA Premium HD app

i tried your method without any Success.
so "fall of enosis" is right.maybe the solve of the problem is to find an ics firmware(from at&t????)

macnick said:
i tried your method without any Success.
so "fall of enosis" is right.maybe the solve of the problem is to find an ics firmware(from at&t????)
Click to expand...
Click to collapse
OK well was worth a try I guess ay try his method and let's us know
Sent from my MB865 using XDA Premium HD app

macnick said:
i tried your method without any Success.
so "fall of enosis" is right.maybe the solve of the problem is to find an ics firmware(from at&t????)
Click to expand...
Click to collapse
Yeah man, if you OTA'd to ICS then I can almost guarantee it will fail at step 3 of the flash process which is the cdt.bin. If you are using the script it will also fail on the recovery portion and the cdrom portion. These are both because of the cdt.bin As of right now, we have no fix for this. Once again, this is the reason we are recommending people to ONLY use the first leak, and not OTA to ANYTHING unless it's 2.3.6 GB. Once again, reference the links I sent you.
You're bricked sir.
Until we find an ICS fxz. Which might be A LONG TIME.
Time to get a replacement/new phone.

Fall of Enosis said:
Yeah man, if you OTA'd to ICS then I can almost guarantee it will fail at step 3 of the flash process which is the cdt.bin. If you are using the script it will also fail on the recovery portion and the cdrom portion. These are both because of the cdt.bin As of right now, we have no fix for this. Once again, this is the reason we are recommending people to ONLY use the first leak, and not OTA to ANYTHING unless it's 2.3.6 GB. Once again, reference the links I sent you.
You're bricked sir.
Until we find an ICS fxz. Which might be A LONG TIME.
Time to get a replacement/new phone.
Click to expand...
Click to collapse
Thanked you as earned it man
Sent from my MB865 using XDA Premium HD app

[MODS] Lock/Delete me [/MODS]

MODS: Please lock this thread. And delete it if I can keep the thanks stats, Thanks.
If your looking for an improved version, see here.
thanks!!!

tcf38012 said:
OK, so finally I recovered my phone from flashing an unsigned system.img on the 67.21.125 ICS (The second version).
I'll go into detail later but here is what I did:
First, I flashed everything included in my fxz minimal.fastboot files.
Second, I flashed the 2.3.6 boot, system, and webtop partition (DON'T FLASH ANY OTHERS RATHER THAN THE boot,system, and grfs img's or you will hard brick your device).
Third, I entered recovery and applyed the first ICS leak, then it went into fastboot and complained about recovery and cdt so I flashed it from the minimal fxz's. And then I re-applyed the ics leak and then Something unreal happened, it booted :laugh::laugh::laugh:.
Last, I OTA'ed to the .125 leak again and everything was back to %100 normal.
And thats the end of the story, someone can write a tutorial from there .
Cheers!!!
PS: I'm not responsible if you bricked your device for good becuase of this, SO DON'T BLAME ME!!!
PSS: If this helped, then please hit the THANKS button below.
Click to expand...
Click to collapse
Nice job!!!

So to make this clear, you found a way to go back to 2.3.6 from the second ics leak? Im not really understanding this.
Sent from my MB865 using xda premium

That is huge! Thank you..
Sent from my phone's mind

tmease1 said:
So to make this clear, you found a way to go back to 2.3.6 from the second ics leak? Im not really understanding this.
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
Accually, It is not downgrading to gb but getting ics working again. If you try to boot gb instead of going to recovery, then you would boot loop.
So if your bricked, then this is the solution to fix it.

tcf38012 said:
Accually, It is not downgrading to gb but getting ics working again. If you try to boot gb instead of going to recovery, then you would boot loop.
So if your bricked, then this is the solution to fix it.
Click to expand...
Click to collapse
Ya i got it after reading it again, thanks.
Sent from my MB865 using xda premium

Wow...this is EXACTLY what I need...I'm not sure as to how exactly you did this. The wording confuses me I guess...feel like a noob lately :/ But excellent work either, Hope I can get this down. I nees to get back to stock ICS but am only able to get into stock ICS recovery/fastboot. Awesome...I hear hope!
Sent from my MB870 using xda premium

DX2Trip said:
Wow...this is EXACTLY what I need...I'm not sure as to how exactly you did this. The wording confuses me I guess...feel like a noob lately :/ But excellent work either, Hope I can get this down. I nees to get back to stock ICS but am only able to get into stock ICS recovery/fastboot. Awesome...I hear hope!
Sent from my MB870 using xda premium
Click to expand...
Click to collapse
Yes his wording confused me a well, don't feel bad. I'm still not sure how he did this.
Sent from my MB865 using xda premium

DX2Trip said:
Wow...this is EXACTLY what I need...I'm not sure as to how exactly you did this. The wording confuses me I guess...feel like a noob lately :/ But excellent work either, Hope I can get this down. I nees to get back to stock ICS but am only able to get into stock ICS recovery/fastboot. Awesome...I hear hope!
Sent from my MB870 using xda premium
Click to expand...
Click to collapse
tmease1 said:
Yes his wording confused me a well, don't feel bad. I'm still not sure how he did this.
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
Well, a few things are not so clear yet - give us a little while to try and come up with a more direct way - or for tcf to put together a guide - but this is my understanding (please correct me or add if necessary, tcf):
He's talking about the minimal fxz package he put together from here: http://forum.xda-developers.com/showthread.php?t=1912035 (which only has a linux script I believe - but you could flash them one by one through the command prompt in windows - or, we could get a batch file made up also).
Then, the system.img, recovery.img, and grfs.img only from 2.3.6 (found in the 2.3.6 fxz from here or the same are in the leak#1 2.3.6 fxz).
Then he applied the leak#1 ota package.
Got thrown back into fastboot.
Flashed the cdt.bin again from the minimal fxz package (which is actually from ICS leak#2/soak package) -- but not sure if he flashed recovery.img from there again also..
Then he re-applied the leak (#1?) again - and it booted to ICS.
So, I am not sure about the timing of things or how it exactly worked out yet, but I notice the linux script for the minimal fxz package doesn't have a reboot-bootloader before the cdt.bin flash - also there should probably be a pause after the reboot-bootloader lines to allow it to reboot completely before attempting to flash the next file. That may be partial reason for the multiple flashings of the cdt.bin.. but, again, maybe not - maybe it's all in some magical order... though a few of us will be digging a bit deeper into this I'm sure.
Thanks again to tcf38012 for pushing this thought of upgrading back to the leak - we were on that path at one time, but the pieces of the puzzle weren't fitting together..

alteredlikeness said:
Well, a few things are not so clear yet - give us a little while to try and come up with a more direct way - or for tcf to put together a guide - but this is my understanding (please correct me or add if necessary, tcf):
He's talking about the minimal fxz package he put together from here: http://forum.xda-developers.com/showthread.php?t=1912035 (which only has a linux script I believe - but you could flash them one by one through the command prompt in windows - or, we could get a batch file made up also).
Then, the system.img, recovery.img, and grfs.img only from 2.3.6 (found in the 2.3.6 fxz from here or the same are in the leak#1 2.3.6 fxz).
Then he applied the leak#1 ota package.
Got thrown back into fastboot.
Flashed the cdt.bin again from the minimal fxz package (which is actually from ICS leak#2/soak package) -- but not sure if he flashed recovery.img from there again also..
Then he re-applied the leak (#1?) again - and it booted to ICS.
So, I am not sure about the timing of things or how it exactly worked out yet, but I notice the linux script for the minimal fxz package doesn't have a reboot-bootloader before the cdt.bin flash - also there should probably be a pause after the reboot-bootloader lines to allow it to reboot completely before attempting to flash the next file. That may be partial reason for the multiple flashings of the cdt.bin.. but, again, maybe not - maybe it's all in some magical order... though a few of us will be digging a bit deeper into this I'm sure.
Thanks again to tcf38012 for pushing this thought of upgrading back to the leak - we were on that path at one time, but the pieces of the puzzle weren't fitting together..
Click to expand...
Click to collapse
Thanks for trying to clarify this. It seems like it would be time consuming for me to try since I'm a windows user. I am glad that he did find a way to get some of our soft bricked users back on track.
Sent from my SAMSUNG-SGH-I997 using xda premium

thanks for good job, waiting your instructions....

Yeah, this great man! I got an A2 that is stuck at the boot logo from a screw up on the second leak. I have a Samsung skyrocket now, so I'm the perfect guinea pig to try out what you need! Eagerly awaiting further instructions!
Sent from my SAMSUNG-SGH-I727 using xda premium

Did Anyone tested this?

I'll write a tutorial after school which I'm about to go to (High School). I get home at 3:45 - 4:30 and I get done my homework at 5:00 - 5:30 so I'll try to write it at 5:45.
Just hang in there!
Cheers!!!

[Q] A2 - To Upgrade or ROM (I'm on 2.3.6)

I have a rooted A2 (AT&T Branded RUNNING on Straight Talk)
Baseband Version LUD_EDISON_R1D7_PATCH_36_111116_2336
Webtop Version WT-1.3.0-176
Kernel Version 2.6.35.7-g98a0a06 [email protected]#1
Build Number 5.5.1-175_EDMR1.25
So, I got this phone a long time ago after breaking (physical damage) my old Samsung Infuse. I had the Infuse (and a Captivate before that) on custom ROMs and enjoyed it.
This phone is only rooted and I deleted some of the bloat-ware from ATT and Moto.
I got a pop-up yesterday to update (67.21.125.en.US - 299MB). However when I downloaded it, and tried to install, it just rebooted, and said install failed. I wen't on Moto's website and downloaded a "fix" (55.13.26.en.US - 57MB) and put it on the SD card. It also failed. From the reading I've been doing, i've found its probably because of deleting the Moto/ATT bloat-ware.
I want ICS (Or Jelly Bean if its available?) but I've read some threads here that it can be a bad idea... I have been looking at some ROMs but I'm still a little nervous because of the locked bootloader.
Should I reflash stock GB and upgrade to OTA ICS or should I just bite the bullet and ROM it with an ICS ROM? (If ICS ROM, which one do you recommend?)

S2005x said:
I have a rooted A2 (AT&T Branded RUNNING on Straight Talk)
Baseband Version LUD_EDISON_R1D7_PATCH_36_111116_2336
Webtop Version WT-1.3.0-176
Kernel Version 2.6.35.7-g98a0a06 [email protected]#1
Build Number 5.5.1-175_EDMR1.25
So, I got this phone a long time ago after breaking (physical damage) my old Samsung Infuse. I had the Infuse (and a Captivate before that) on custom ROMs and enjoyed it.
This phone is only rooted and I deleted some of the bloat-ware from ATT and Moto.
I got a pop-up yesterday to update (299MB). However when I downloaded it, and tried to install, it just rebooted, and said install failed. I wen't on Moto's website and downloaded a "fix" (55.13.26.en.US - 57MB) and put it on the SD card. It also failed. From the reading I've been doing, i've found its probably because of deleting the Moto/ATT bloat-ware.
I want ICS (Or Jelly Bean if its available?) but I've read some threads here that it can be a bad idea... I have been looking at some ROMs but I'm still a little nervous because of the locked bootloader.
Should I reflash stock GB and upgrade to OTA ICS or should I just bite the bullet and ROM it with an ICS ROM? (If ICS ROM, which one do you recommend?)
Click to expand...
Click to collapse
You have to be on ICS to flash ICS or Jelly Bean ROMs. You either have the option of flashing back to stock gingerbread and applying the leak if you want to return to gingerbread at some point, or you can ota and be stuck on ICS permanently.
Sent from my MB865 using xda premium

Scottyfer said:
You have to be on ICS to flash ICS or Jelly Bean ROMs. You either have the option of flashing back to stock gingerbread and applying the leak if you want to return to gingerbread at some point, or you can ota and be stuck on ICS permanently.
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
Thank you very much for the reply!
So no matter what, I have to reflash back to GB. I gotta go find out how to do that now... : \
Is this the HOW TO guild for the leak you'd recommend I use to get to ICS?

Found this in the Noob Thread. However, the 2 links to the FXZ files are no longer available/broken links...
*Ninja Edit* Found this thread, downloading now to try it out.
STEPS:
1) Have the correct Motorola drivers installed for your PC (i.e. x32-bit or x64-bit).
Here is the Motorola Driver site
http://www.motorola.com/consumers/v/...D&pubid=987654
2) Download RSD Lite & install on your PC.
Here is the latest version to download (RSD Lite 5.6)
http://forum.xda-developers.com/atta...7&d=1321414457
3) Choose the FXZ file to download
Android 2.3.5 ---- Blur_Version.55.11.16.MB865.ATT.en.US
InlineFlashing_edison_5.5.175.16_cfc_p3_APBP_CID28 5.zip
4) Make sure you alternatively boot into AP Fastboot mode by powering down (or pulling battery), then press and hold the volume up and down button while powering on.
5) Plug your phone into a back USB port on your computer.
Front USB ports are often unreliable when it comes to power levels. They should not be used for flashing.
6)Run “RSD Lite” on your computer
7)Press the “. . .” button next to the box labeled “Filename”
8)Browse and open the FXZ file or just just drag the FXZ file onto the file path bar in RSD Lite
9)Wait for the program to read the file, then choose “START”
10) Now, the device will slowly flash the FXZ file. BE PATIENT AS THIS MAY TAKE A WHILE!
11) Congratulations! You’ve restored your ATRIX 2!!

S2005x said:
Thank you very much for the reply!
So no matter what, I have to reflash back to GB. I gotta go find out how to do that now... : \
Is this the HOW TO guild for the leak you'd recommend I use to get to ICS?
Click to expand...
Click to collapse
That's the correct ICS leak.
The fxz script is much easier to use, just don't use it after you've upgraded. You WILL end up with a hard brick. There's a different fxz here: http://forum.xda-developers.com/showthread.php?t=1805975
Sent from my MB865 using xda premium

Scottyfer said:
That's the correct ICS leak.
The fxz script is much easier to use, just don't use it after you've upgraded. You WILL end up with a hard brick. There's a different fxz here: http://forum.xda-developers.com/showthread.php?t=1805975
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
Cool. Downloading now. Thanks again for your help Scott!

Scottyfer said:
That's the correct ICS leak.
The fxz script is much easier to use, just don't use it after you've upgraded. You WILL end up with a hard brick. There's a different fxz here: http://forum.xda-developers.com/showthread.php?t=1805975
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
That FXZ script is from ICS back to 2.3.5... I'm not on ICS yet...
I need one that gets me from 2.3.6 to 2.3.5...

Updating to ICS now
Already picked a ROM, and as soon as this finishes, gonna install that too

S2005x said:
That FXZ script is from ICS back to 2.3.5... I'm not on ICS yet...
I need one that gets me from 2.3.6 to 2.3.5...
Click to expand...
Click to collapse
Here you can grab the GB to GB 2.3.6 fxz.
Sent from my MB865 running a beastly CM10

Awesome.
Thanks guys!!! Got it working.
Running this ROM because its really close to stock, and it reminds me of my Nexus 7. Now I just gotta play with it, and set up my apps/widgets etc.
I really appreciate the help directing me to threads etc