i have rooted my infuse 4g using odin using this thread http://forum.xda-developers.com/showthread.php?t=1613523. but after installing this my phone was okay, then after i took backup thru cwm, after that i installed rom of jellybean and after installing it my phone cant start, so i took battery out and again go to recovery mod and try to restore it but i m facing same problem, my phone not starting, even usb mount also not working,
i have format my infuse again and try to do it with odin again but it shows that
E: failed to mount/dbdata(file exist)
E: copy_dbdate_media:cant mount /dbdate
your storage not prepared yet, please use UI menu for format and reboot action.
media files copy failed.
please help me. i m worried about it coz just yesterday i bought it new. so please please help me.
i dont know what is UI menu also.
If you had read the OP, you can't go directly to JB, you have to be on ICS, then flash JB.
Which option did you use from that page? I've used "I997UCLB3-root.rar" many times. But sometimes it gets stuck and I have to pull the usb cable and start over.
So, use I997UCLB3-root.rar, to go back to stock GB. Then flash an ICS rom, reboot. Then flash a JB rom.
Truckerglenn said:
If you had read the OP, you can't go directly to JB, you have to be on ICS, then flash JB.
Which option did you use from that page? I've used "I997UCLB3-root.rar" many times. But sometimes it gets stuck and I have to pull the usb cable and start over.
So, use I997UCLB3-root.rar, to go back to stock GB. Then flash an ICS rom, reboot. Then flash a JB rom.
Click to expand...
Click to collapse
Thank you for your reply but i have tried directly to go to jellybean from GB 2.3.6 and i also tried now to root again using I997UCLB3-root.rat but then also my phone giving same error that E: cant mount and samsung logo come only
huseniezzaz said:
Thank you for your reply but i have tried directly to go to jellybean from GB 2.3.6 and i also tried now to root again using I997UCLB3-root.rat but then also my phone giving same error that E: cant mount and samsung logo come only
Click to expand...
Click to collapse
Flashing JB is a big leap. Some reading, specially when you are new, could have saved you the trouble. But well, now is time to learn the hard way.
Download any uclb3 back to stock pack, either Odin or heimdall. Put your phone in download mode:
1) take out battery and place it back.
2) while holding vol + & - , connect your phone with a usb cable already inserted into the Pc.
Once in download mode, see if your phone is detected by odin or heimdall. If not you may need to install the drivers.
When all is ready, hit start.
*you probably don't have GB bootloaders. That will cause rainbows in your recovery when flashing ics and jb. If you feel you cant live with them, you will need to flash them.*
To flash jellybean, 1st flash any ics rom following directions coming from GB in the OP. Once you have blue recovery, flash JB with the directions in the rom OP.
Sent from my sweet & buttery Infuse
huseniezzaz said:
Thank you for your reply but i have tried directly to go to jellybean from GB 2.3.6 and i also tried now to root again using I997UCLB3-root.rat but then also my phone giving same error that E: cant mount and samsung logo come only
Click to expand...
Click to collapse
read this, should help
http://forum.xda-developers.com/showthread.php?t=1776129
This too
http://forum.xda-developers.com/showthread.php?t=1437548
Thank you thank you thank you
andros11 said:
Flashing JB is a big leap. Some reading, specially when you are new, could have saved you the trouble. But well, now is time to learn the hard way.
Download any uclb3 back to stock pack, either Odin or heimdall. Put your phone in download mode:
1) take out battery and place it back.
2) while holding vol + & - , connect your phone with a usb cable already inserted into the Pc.
Once in download mode, see if your phone is detected by odin or heimdall. If not you may need to install the drivers.
When all is ready, hit start.
*you probably don't have GB bootloaders. That will cause rainbows in your recovery when flashing ics and jb. If you feel you cant live with them, you will need to flash them.*
To flash jellybean, 1st flash any ics rom following directions coming from GB in the OP. Once you have blue recovery, flash JB with the directions in the rom OP.
Sent from my sweet & buttery Infuse
Click to expand...
Click to collapse
I got my phone back. its working in 2.3.6 very nicely once again. thank you so much for response. i am very happy to see my phone start and i am smiling after 3 hours. huh. now i rooted it with odin I997UCLB3-CWM-root-deodex-extras.rar. now can you please tell me how can i install JB? i m curiously waiting to JB in my infuse. please make it JB.
huseniezzaz said:
I got my phone back. its working in 2.3.6 very nicely once again. thank you so much for response. i am very happy to see my phone start and i am smiling after 3 hours. huh. now i rooted it with odin I997UCLB3-CWM-root-deodex-extras.rar. now can you please tell me how can i install JB? i m curiously waiting to JB in my infuse. please make it JB.
Click to expand...
Click to collapse
The first link I posted for you will walk you through it. Read all the instructions, re-read, look up anything you don't understand, and then follow the directions.
huseniezzaz said:
I got my phone back. its working in 2.3.6 very nicely once again. thank you so much for response. i am very happy to see my phone start and i am smiling after 3 hours. huh. now i rooted it with odin I997UCLB3-CWM-root-deodex-extras.rar. now can you please tell me how can i install JB? i m curiously waiting to JB in my infuse. please make it JB.
Click to expand...
Click to collapse
As others mentioned, you first need to install an ICS ROM, like CM9 or Uniporn. The first time you flash you will prob get stuck in a boot loop and will need to use the three finger method to get back to recovery. In case you don't know what that means, you hold the volume keys and power button to turn phone on and then release only the power button when the Samsung logo shows. When u get back to recovery, flash the same ROM a second time and then it will boot.
You will now have blue recovery so you can flash the jb ROM of choice by following the method in the OP for that ROM. Remember to pull out the external sdcard if you have one.
Also, as others have mentioned, you may not have GB bootloaders. To get them, go to the "ISET infuse everything thread" which is stickied in the dev section. You will find Odin and Heimdall packages which have the bootloaders there. Be very careful when installing bootloaders (test usb with a kernel or something less dangerous first) bc if it fails while trying to flash the bootloaders, it can hard brick your phone. And then thank bigjoe for putting together the ISET thread so all infuse users can find everything we need in one place.
Sent from my SGH-I997 using xda app-developers app
Thank you thank you thank you
benbos_06 said:
As others mentioned, you first need to install an ICS ROM, like CM9 or Uniporn. The first time you flash you will prob get stuck in a boot loop and will need to use the three finger method to get back to recovery. In case you don't know what that means, you hold the volume keys and power button to turn phone on and then release only the power button when the Samsung logo shows. When u get back to recovery, flash the same ROM a second time and then it will boot.
You will now have blue recovery so you can flash the jb ROM of choice by following the method in the OP for that ROM. Remember to pull out the external sdcard if you have one.
Also, as others have mentioned, you may not have GB bootloaders. To get them, go to the "ISET infuse everything thread" which is stickied in the dev section. You will find Odin and Heimdall packages which have the bootloaders there. Be very careful when installing bootloaders (test usb with a kernel or something less dangerous first) bc if it fails while trying to flash the bootloaders, it can hard brick your phone. And then thank bigjoe for putting together the ISET thread so all infuse users can find everything we need in one place.
Sent from my SGH-I997 using xda app-developers app
Click to expand...
Click to collapse
Thank you so much, i have flashed JB successfully and GAPPs also. thank you once again. i followed your method and its very easy. first CWM was red i flash JB and after that i pull battery and start CWM at that time it was Blue and i flashed, now its installed.
One more HAPPY INFUSE OWNER.
Is this forum group great, or what!!!!!!
benbos_06 said:
As others mentioned, you first need to install an ICS ROM, like CM9 or Uniporn. The first time you flash you will prob get stuck in a boot loop and will need to use the three finger method to get back to recovery. In case you don't know what that means, you ...
Click to expand...
Click to collapse
I think if you don't know what "that" means...it means you have not read anything you probably need to read on this forum. and probably should not even be thinking about JB let alone trying to flash it.
No slight on you benbos_06, I thought it was funny reading uninformed posts about "rainbow colors" in their their recovery a few months ago...now it's almost kind of sad to see the uninformed trying to go JB...and needing double flash and 3 finger to recovery detailed in step by step instructions. Jeeze!!! That's a little scary.
Sent from a de-FUNKt Infuse
Smokestack360 said:
I think if you don't know what "that" means...it means you have not read anything you probably need to read on this forum. and probably should not even be thinking about JB let alone trying to flash it.
No slight on you benbos_06, I thought it was funny reading uninformed posts about "rainbow colors" in their their recovery a few months ago...now it's almost kind of sad to see the uninformed trying to go JB...and needing double flash and 3 finger to recovery detailed in step by step instructions. Jeeze!!! That's a little scary.
Sent from a de-FUNKt Infuse
Click to expand...
Click to collapse
+ 100... right on, Smoke !!
Related
Hello, I am a long-time viewer of xda but a new member, this is my first post.
(and yes, i looked for a similar theard. i could not find one.)
So, onto the problem.
I flashed Infinitum 1.1.1 to my Infuse using cwm recovery. I noticed problems right off the bat when after i had installed the zip, i rebooted into recovery then it got stuck on the samsung logo and i had to pull the battery (a normal event when flashing this rom) So when i pulled the battery and booted into recovery to try again, the cwm recovery was terribly screwed up. The top half of the screen was pixelated, and the navigation menu was off center. I was still able to use cwm to flash the rom successfully, But cwm remains srewed up.
So i tried to reflash cwm recovery using rom manager. but when i rebooted i was stuck in a recovery boot-loop that i had to get out of using odin.
I then flashed the rom again using the same procedure suggested by its developer, and it worked, but cwm is still acting as it was before. (the pixelated top half of the screen and the off center navigation menu. )
So can i get some help? i thought about removing cwm the using some other recovery. I also heard that cwm wont work on ics, but im unsure what it is.
Thanks in advance.
You don't have Gingerbread bootloaders. That's why recovery looks the way it does.
You need to Odin or Heimdall back to Gingerbread stock (I find Heimdall much easier for this) and then flash Entropy's DD kernel to get back into red recovery to flash Infinitum.
Posts 1 and 2 in this thread are what you need: http://forum.xda-developers.com/showthread.php?t=1524081
lukas_s said:
You don't have Gingerbread bootloaders. That's why recovery looks the way it does.
You need to Odin or Heimdall back to Gingerbread stock (I find Heimdall much easier for this) and then flash Entropy's DD kernel to get back into red recovery to flash Infinitum.
Posts 1 and 2 in this thread are what you need: http://forum.xda-developers.com/showthread.php?t=1524081
Click to expand...
Click to collapse
I i came from froyo, and is there a way to get the bootloaders without reverting to gingerbread stock?
Hard2thexcore said:
I i came from froyo, and is there a way to get the bootloaders without reverting to gingerbread stock?
Click to expand...
Click to collapse
Yeah, ICS recovery doesn't play nice with Froyo bootloaders.
AFAIK, there is no way to get Gingerbread bootloaders without reverting to stock. With Heimdall it's an incredibly simple, and quick process. I just had to do it myself a couple nights ago
lukas_s said:
Yeah, ICS recovery doesn't play nice with Froyo bootloaders.
AFAIK, there is no way to get Gingerbread bootloaders without reverting to stock. With Heimdall it's an incredibly simple, and quick process. I just had to do it myself a couple nights ago
Click to expand...
Click to collapse
Thank man, one more thing, will going back to gingerbread stock work if the only time i have ever used gingerbread was when i used the Zeus rom. The only other thing i have had besides zeus and this ics rom was froyo.
Hard2thexcore said:
Thank man, one more thing, will going back to gingerbread stock work if the only time i have ever used gingerbread was when i used the Zeus rom. The only other thing i have had besides zeus and this ics rom was froyo.
Click to expand...
Click to collapse
Yup, it'll work just fine
Just follow all the instructions for Heimdall to a T (there aren't many) and everything will be fine
Yeah...heimdal is the best way to get bootloaders...odin doesnt always do it and no custom rom includes them that i am aware of...
I had written detailed instructions for another person...ill try and find them and paste it here...
Also-dont use rom manager, that thing is known to cause bricks/bootloops so using it is asking for bad ju-ju lol
Sent from my SAMSUNG-SGH-I997 using XDA
mg2195 said:
Have you tried flashing boot loaders?
Here is how to do it...
1) Download uclb3 heimdal by qckster
2) open the program
3) put phone in download mode
4) click flash (leave program open when finished DO NOT CLOSE)
5) after it finishes and your phone reboots, put the phone back in download mode and reconnect to PC
6) click flash bootloader on the heimdal program you left running
7) flash, let reboot and your problems should be gone
Download mode instructions
1) pull battery
2) put battery back in
3) hold volume up + down
4) connect phone to PC with USB cable *don't let go of volume*
Just because you were on gingerbread previously does nit mean you have ginger bread boot loaders...I had ginger bread since the first leaks and did not have boot loaders until a month or two ago when I flashed them using those steps above...
Good luck!
Sent from my SGH-I997 using XDA
Click to expand...
Click to collapse
There you go...follow those instructions and your cwm will be fixed!!!
Also just added it to my op of infinitum...
Sent from my SAMSUNG-SGH-I997 using XDA
Thank you for posting the guide. I literally just got done flashing GB bootloaders to my Infuse because of the rainbow Recovery when I'm on ICS. I used Odin though and used GB loader that a member posted in the AOKP Uniporn thread. I was scared but there really isn't anything to be afraid of. I tried using Heimdall but dang that was nerve racking because I was trying to use it on Mac and it wouldn't let me do the flash.
Jammol said:
Thank you for posting the guide. I literally just got done flashing GB bootloaders to my Infuse because of the rainbow Recovery when I'm on ICS. I used Odin though and used GB loader that a member posted in the AOKP Uniporn thread. I was scared but there really isn't anything to be afraid of. I tried using Heimdall but dang that was nerve racking because I was trying to use it on Mac and it wouldn't let me do the flash.
Click to expand...
Click to collapse
Good deal, glad you got it sorted out. And to clear up some confusion that is in this thread: you don't have to flash an entire Gingerbread rom to get the bootloaders. We all have our preferred ways of doing it, but you CAN flash just the bootloaders.
Here is both a Heimdall and an Odin way to get JUST the bootloaders. That's all that is necessary for someone who has rainbow distortion issues on an ICS or Gingerbread rom.:
See the third post (HERE) in Entropy512's Unofficial CM9 thread for instructions on how to flash just the bootloaders using the Heimdall command line. Or, see the answer to question 1.) in the FAQ of the rooted UCLB3 Odin thread which is HERE.
mg2195 said:
Yeah...heimdal is the best way to get bootloaders...odin doesnt always do it
Click to expand...
Click to collapse
Heimdall is one way to get the bootloaders, and here's how I did it.:
heimdall flash --primary-boot boot.bin --secondary-boot Sbl.bin
The second part of your statement isn't true. Odin doesn't do it only when the user can't figure out how to use Odin.
thank you everyone.
Being a creature of habit i ended up flashing to rom and bootloaders using odin. that did indeed fix CWM right up.
GB loader
Jammol said:
Thank you for posting the guide. I literally just got done flashing GB bootloaders to my Infuse because of the rainbow Recovery when I'm on ICS. I used Odin though and used GB loader that a member posted in the AOKP Uniporn thread. I was scared but there really isn't anything to be afraid of. I tried using Heimdall but dang that was nerve racking because I was trying to use it on Mac and it wouldn't let me do the flash.
Click to expand...
Click to collapse
I am trying to get those GB Bootloaders. Would you be able to provide them ? or to provide the AOKP Uniport thread ?
RemiChartier said:
I am trying to get those GB Bootloaders. Would you be able to provide them ? or to provide the AOKP Uniport thread ?
Click to expand...
Click to collapse
Unfortunately I haven't had this device for over 3 years now. You'll have to do some searching for that.
Jammol said:
Unfortunately I haven't had this device for over 3 years now. You'll have to do some searching for that.
Click to expand...
Click to collapse
Thanks, I have found the GG boot.bin and sbl.bin in another thread, I will update later on this thread.
RemiChartier said:
Thanks, I have found the GG boot.bin and sbl.bin in another thread, I will update later on this thread.
Click to expand...
Click to collapse
Where did you find them? Please share...
Im trying to figure all this out and do it safely. I guess I bricked my 1st phone blue light only no power? I'm hoping to NOT do it again :good: ... Not very easy to get help around these forums since most ppl think you should already know. Im on ff18 and root per Qbkings vid, agat 0.2.1. Im timid on flashing now due to the brick. I have flshed about 10 roms when i was on el29 and never had any problems until i tried to flash an ICS rom.
So if im on ff18 root agat can I just use the format all and flash safely. And also how do you know when your going between roms that you are doing it safe? I want to try a few out?
Gtalk or emial [email protected] for any help offered.
Thank you in advance
Even though there is custom recoveries for ics. Many of us still use the tried and true method by using the el26 kernel.
Also format all does not play well with ics. Just wipe caches and do a factory wipe.
Sent from my SPH-D710 using xda premium
gilbydakid said:
Even though there is custom recoveries for ics. Many of us still use the tried and true method by using the el26 kernel.
Also format all does not play well with ics. Just wipe caches and do a factory wipe.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Cool so stay away from the caulk format all?
I flashed gingerbread roms over and over, after a bit my restores wouldn't work , then went for the milestone rom and bricked... I was supposed to use el26 according to vid and I think I tried to do it using clockwork instead of Odin(was I supposed to use Odin)? The only time I've used Odin was to root when I was on el29 and to root after i got ff18 ota. So do you use Odin each time and install the 26 kernel each time I want to install a new rom to be safe? ( if so then cool but I want to make sure I understand ) do I also have to are install cwm each time ( like meaning a safe version of it )
Right now the few rooms I'm seeing that I would like to try is cm9, the universe rom, and I hear about the " goodness rom"?
OK, so heres situation I'm on agat 2.1 and ff18 . Out of those three can I just download the rom and flash one or do I need to go to the 26 kernel and then do it EVERYTIME to be safe? I was sent a link for a safe kernel and said to " use and flash "? That just doesnt make complete sense to me yet?
Any and all is soooooo appreciated! I'm going to get this figured out so I can be comfortable and pros like some of you! I m really looking forward to it and if anybody wants to help a bit you can hit my email and I will not try to just waste ur time lol...
Thank you
A guy who doesn't wanna be a noob 4ever
I used this
http://forum.xda-developers.com/showthread.php?t=1525495
jpeclf said:
Cool so stay away from the caulk format all?
I flashed gingerbread roms over and over, after a bit my restores wouldn't work , then went for the milestone rom and bricked... I was supposed to use el26 according to vid and I think I tried to do it using clockwork instead of Odin(was I supposed to use Odin)? The only time I've used Odin was to root when I was on el29 and to root after i got ff18 ota. So do you use Odin each time and install the 26 kernel each time I want to install a new rom to be safe? ( if so then cool but I want to make sure I understand ) do I also have to are install cwm each time ( like meaning a safe version of it )
Right now the few rooms I'm seeing that I would like to try is cm9, the universe rom, and I hear about the " goodness rom"?
OK, so heres situation I'm on agat 2.1 and ff18 . Out of those three can I just download the rom and flash one or do I need to go to the 26 kernel and then do it EVERYTIME to be safe? I was sent a link for a safe kernel and said to " use and flash "? That just doesnt make complete sense to me yet?
Any and all is soooooo appreciated! I'm going to get this figured out so I can be comfortable and pros like some of you! I m really looking forward to it and if anybody wants to help a bit you can hit my email and I will not try to just waste ur time lol...
Thank you
A guy who doesn't wanna be a noob 4ever
Click to expand...
Click to collapse
Sorry it took so long to get back, it got kind of hectic at work.
Here is my formula of flashing.
Odin el26- make sure it is in the pda slot.
Go into recovery. From there I wipe dalvik, cache, factory 3 times apiece. You don't have to do it that much, it just gives me piece of mind.
Flash rom from zip. Reboot. Then I flash my modem through Odin- make sure the modem bin file is in the phone slot.
Hit run wait for it to reboot and enjoy.
Also don't worry about asking me any questions unlike most of the xda members I'm not a prick that will tell you search and read.
I can read a calculus book until I'm blue in the face. Doesn't mean I'm going to know how to do calculus after unless I'm given some guidance.
My current setup is -
Cm9- 6/21 build from Chris g
Kernel- ff11
Modem- el29
Sent from my SPH-D710 using xda premium
Odin v1.81 will not see phone in download mode
Hi,
my Epic4gTouch is currently on IMM761.FH13 and I want to go back to prerooted EL29.
I follow the instructions from this link by sfhub
http://forum.xda-developers.com/showthread.php?t=1409634
I downloaded and loaded Odin3Excution v1.81
a) Put my phone into download mode with power and volume up.
1) The software never recognized my phone and I get no yellow com port. My window 7 PC does recognize my phone even in download mode.
2) If I do the same thing for my wife's phone which is still on GB then it sees the com port, but not on the phone with ICS installed already.
I tried to search and see if people have the same issue and did not find anything. For those who have already downgraded from ICS to EL29
can you please tell me which software you use and how you did it.
Thank you,
-Doan
gilbydakid said:
Sorry it took so long to get back, it got kind of hectic at work.
Here is my formula of flashing.
Odin el26- make sure it is in the pda slot.
Go into recovery. From there I wipe dalvik, cache, factory 3 times apiece. You don't have to do it that much, it just gives me piece of mind.
Flash rom from zip. Reboot. Then I flash my modem through Odin- make sure the modem bin file is in the phone slot.
Hit run wait for it to reboot and enjoy.
Also don't worry about asking me any questions unlike most of the xda members I'm not a prick that will tell you search and read.
I can read a calculus book until I'm blue in the face. Doesn't mean I'm going to know how to do calculus after unless I'm given some guidance.
My current setup is -
Cm9- 6/21 build from Chris g
Kernel- ff11
Modem- el29
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
doan_group said:
Hi,
my Epic4gTouch is currently on IMM761.FH13 and I want to go back to prerooted EL29.
I follow the instructions from this link by sfhub
http://forum.xda-developers.com/showthread.php?t=1409634
I downloaded and loaded Odin3Excution v1.81
a) Put my phone into download mode with power and volume up.
1) The software never recognized my phone and I get no yellow com port. My window 7 PC does recognize my phone even in download mode.
2) If I do the same thing for my wife's phone which is still on GB then it sees the com port, but not on the phone with ICS installed already.
I tried to search and see if people have the same issue and did not find anything. For those who have already downgraded from ICS to EL29
can you please tell me which software you use and how you did it.
Thank you,
-Doan
Click to expand...
Click to collapse
http://hotfile.com/dl/145140482/1e58...Stock.zip.html el29 file
http://forums.acsyndicate.net/showthread.php? 2685-Odin-1-85-download-for-the-Epic-Touch-4G odin 1.85
http://www.youtube.com/watch? v=_vmEmheJnyg
Btw download mode is power and volume DOWN then once your there you press the up button you get into download mode before plugging in.
If odin doesnt recognize phone with yellow com ..try a different cable
hope it helps
Sent from my SPH-D710 using Tapatalk 2
doan_group said:
Hi,
my Epic4gTouch is currently on IMM761.FH13 and I want to go back to prerooted EL29.
I follow the instructions from this link by sfhub
http://forum.xda-developers.com/showthread.php?t=1409634
I downloaded and loaded Odin3Excution v1.81
a) Put my phone into download mode with power and volume up.
1) The software never recognized my phone and I get no yellow com port. My window 7 PC does recognize my phone even in download mode.
2) If I do the same thing for my wife's phone which is still on GB then it sees the com port, but not on the phone with ICS installed already.
I tried to search and see if people have the same issue and did not find anything. For those who have already downgraded from ICS to EL29
can you please tell me which software you use and how you did it.
Thank you,
-Doan[/QUOTE
Glad you got it fixed ... when you roll back you will probably start getting an OTA update that will annoy the S--T out of you as it did me! Use this method it easy and make sure to hit thanks for him ...this was a life saver!!!! http://forum.xda-developers.com/showthread.php?t=
Sent from my SPH-D710 using Tapatalk 2
Click to expand...
Click to collapse
Hi, I've searched and can't find an answer. I've managed to root my Infuse and got Infinitum rom installed. It was working great until just this evening when Clockworkmod updated (sorry, I can't find the version number). It went into a boot loop. It took me a bit, but I managed to get it out of the boot loop and back to stock, now it's rooted again with Infinitum running again.
I'm trying to get back to a recovery point that I do have on the phone, but I can't get the phone to boot to recovery no matter what I do. When I try using the vol and power buttons combination or from ROM manager I get the same thing. It goes past the stock Samsung logo into the Galaxy S/Cyanogen(mod) logo, but freezes there.
I can, of course, take the loss of my setup and redo everything manually. I would really prefer to be able to get that backup back. I'm also concerned should I ever need to get into recovery mode for any other reason. My guess is that I need to downgrade the CWM version, but I haven't been able to find how to do it.
Can anyone give me any help? Please let me know if there's info that I can give that would be useful...I'm noobie, I know!
VyCariously said:
Hi, I've searched and can't find an answer. I've managed to root my Infuse and got Infinitum rom installed. It was working great until just this evening when Clockworkmod updated (sorry, I can't find the version number). It went into a boot loop. It took me a bit, but I managed to get it out of the boot loop and back to stock, now it's rooted again with Infinitum running again.
I'm trying to get back to a recovery point that I do have on the phone, but I can't get the phone to boot to recovery no matter what I do. When I try using the vol and power buttons combination or from ROM manager I get the same thing. It goes past the stock Samsung logo into the Galaxy S/Cyanogen(mod) logo, but freezes there.
I can, of course, take the loss of my setup and redo everything manually. I would really prefer to be able to get that backup back. I'm also concerned should I ever need to get into recovery mode for any other reason. My guess is that I need to downgrade the CWM version, but I haven't been able to find how to do it.
Can anyone give me any help? Please let me know if there's info that I can give that would be useful...I'm noobie, I know!
Click to expand...
Click to collapse
There are many layers to your questions.
You may need to read a bit more to get a better understanding.
Here is two points I can offer that may be helpful.
1. Don't use ROM Manager for the Infuse.
2. To downgrade a cwm version, you will need to flash a GB or FROYO kernel in download mode via heimdall or odin. You can also use any one of the return to stock that is flashed in download mode also.
If you think you lost recovery, try flashing the kernel for the rom you were running in cwm, if you can get back into cwm again.
qkster said:
There are many layers to your questions.
You may need to read a bit more to get a better understanding.
Here is two points I can offer that may be helpful.
1. Don't use ROM Manager for the Infuse.
2. To downgrade a cwm version, you will need to flash a GB or FROYO kernel in download mode via heimdall or odin. You can also use any one of the return to stock that is flashed in download mode also.
If you think you lost recovery, try flashing the kernel for the rom you were running in cwm, if you can get back into cwm again.
Click to expand...
Click to collapse
I believe you about the ROM Manager. Too late, unfortunately. I'll take it off.
I had the phone back to stock with Odin. I went through all of the steps that I went through to first root it and install Infinitum. I had red cwm at the time. I just can't seem to get into it now. I don't think I lost it, I'm just unsure of how to get to it, since it freezes at the cm startup. I can just power off from there after I give up waiting, and it will boot to ICS normally when I power it on normally. I have Titanium Backup Pro, and it can access the nandroid backup that I have to get the apps and data. I was just hoping to recover the whole setup. I had an issue last weekend (oops to me) when I tried to install a JB rom where it went into a boot loop. I recovered everything after backtracking like I did tonight, and was hoping to be able to do the same. Is there any hope, do you think, if I go back and return to stock and start over from the beginning again? If not, I'll just suffer and redo the whole thing.
By the way, I really appreciate you answering. I've been lurking for a few weeks, and realize that you know a LOT about these phones.
VyCariously said:
I believe you about the ROM Manager. Too late, unfortunately. I'll take it off.
I had the phone back to stock with Odin. I went through all of the steps that I went through to first root it and install Infinitum. I had red cwm at the time. I just can't seem to get into it now. I don't think I lost it, I'm just unsure of how to get to it, since it freezes at the cm startup. I can just power off from there after I give up waiting, and it will boot to ICS normally when I power it on normally. I have Titanium Backup Pro, and it can access the nandroid backup that I have to get the apps and data. I was just hoping to recover the whole setup. I had an issue last weekend (oops to me) when I tried to install a JB rom where it went into a boot loop. I recovered everything after backtracking like I did tonight, and was hoping to be able to do the same. Is there any hope, do you think, if I go back and return to stock and start over from the beginning again? If not, I'll just suffer and redo the whole thing.
By the way, I really appreciate you answering. I've been lurking for a few weeks, and realize that you know a LOT about these phones.
Click to expand...
Click to collapse
Okay, so next question. I've been reading and searching and reading some more. I can get the phone back to stock and work up again, but I still reach a point where it will freeze on the Samsung/CM startup screen. In reading the Infinitum Project thread, I found this (yes, it's pretty easy to find):
"Recovery/CWM messed up?
Here is how to fix it...
1) Download uclb3 heimdal by qkster
2) open the program
3) put phone in download mode
4) click flash (leave program open when finished DO NOT CLOSE)
5) after it finishes and your phone reboots, put the phone back in download mode and reconnect to PC
6) click flash bootloader on the heimdal program you left running
7) flash, let reboot and your recovery problems should be gone"
I used that to get back to stock before...doesn't that remove the root? Do I have to go through all that, then the bootloaders, and then go back and root all over again to get back to a working CWM? I'm sorry to ask so many questions, but it seems that I've done most of this already, though I admit to not doing the flash for the bootloader. I'm just unclear since it says "your recovery problems should be gone" at the end of that, like I have to do nothing more.
That does remove root access. However, root isn't really necessary, at least for the stock ROM, if you have no intentions of staying stock. The ROM .zips you'll subsequently flash are pre-rooted. After you Heimdall back to stock, and flash it again with "flash bootloaders" selected, then use Heimdall to flash this kernel:
http://d-h.st/6KA
That'll flash both a new kernel and CWM Red recovery. It'll take a few minutes to boot up the first time, as it's installing the lagfix. Once it boots up, just shut it down and boot back up in recovery. From there, you can do whatever you need to do.
VyCariously said:
Okay, so next question. I've been reading and searching and reading some more. I can get the phone back to stock and work up again, but I still reach a point where it will freeze on the Samsung/CM startup screen. In reading the Infinitum Project thread, I found this (yes, it's pretty easy to find):
"Recovery/CWM messed up?
Here is how to fix it...
1) Download uclb3 heimdal by qkster
2) open the program
3) put phone in download mode
4) click flash (leave program open when finished DO NOT CLOSE)
5) after it finishes and your phone reboots, put the phone back in download mode and reconnect to PC
6) click flash bootloader on the heimdal program you left running
7) flash, let reboot and your recovery problems should be gone"
I used that to get back to stock before...doesn't that remove the root? Do I have to go through all that, then the bootloaders, and then go back and root all over again to get back to a working CWM? I'm sorry to ask so many questions, but it seems that I've done most of this already, though I admit to not doing the flash for the bootloader. I'm just unclear since it says "your recovery problems should be gone" at the end of that, like I have to do nothing more.
Click to expand...
Click to collapse
As Apex pointed out, each time we bring the phone back to stock, we lose root access and all the previous setup. It's a fact of flashing.
No big deal though, rooting is easy and is not really needed. What is needed is the insecure kernel with cwm. The link Apex gave you is the same as the posted kernel in post #2 of the thread. That kernel will give you the cwm. Review that thread if you haven't yet.
Flash the heimdall uclb3 repartition package. Immediately after it successfully boot your phone, don't close the program. check the bootloader box and put the phone back into dl mode and flash it again to get your gb bootloaders...
then flash the kernel.
review my how to thread if you need to.
Andros11 also made a how to for JB if you want to live vicariously.
gl
qkster said:
Andros11 also made a how to for JB if you want to live vicariously.
gl
Click to expand...
Click to collapse
Thanks guys
It's been a crazy busy week and I just didn't have time to deal with the phone. I've been dealing with stock gingerbread. It's getting kind of annoying, though, it seems less stable than the custom ICS that I had on it before. Not sure when I'm going to have time to play with it again and try to get it to where I want it. I think I'm going to try to totally wipe all of the old stuff out of the memory before I do it again, though. There's something that wasn't allowing me to do what you guys are telling me to do successfully. I'm also thinking of finding a GS2 and just selling the Infuse, not because of my confusion, but because the GS2 was what I was originally looking for anyway.
I'll try to get this one set up first, though, as it's just a matter of me being obsessive about it.
qkster, I'll look into the JB, too, lol.
qkster said:
As Apex pointed out, each time we bring the phone back to stock, we lose root access and all the previous setup. It's a fact of flashing.
No big deal though, rooting is easy and is not really needed. What is needed is the insecure kernel with cwm. The link Apex gave you is the same as the posted kernel in post #2 of the thread. That kernel will give you the cwm. Review that thread if you haven't yet.
Flash the heimdall uclb3 repartition package. Immediately after it successfully boot your phone, don't close the program. check the bootloader box and put the phone back into dl mode and flash it again to get your gb bootloaders...
then flash the kernel.
review my how to thread if you need to.
Andros11 also made a how to for JB if you want to live vicariously.
gl
Click to expand...
Click to collapse
Hey I am not the Infuse user... But I faced similar problem in my xperia some days back after updating the recovery.
I was also not able to enter recovery at boot time using my usual volume down way...
What the change was the new recovery checks for tap on the screen (repeatetive) instead of volume down button...
Not sure if it will work or not for you... But you can give a try...
Hit thanks if it works
Sent from my MT11i using xda app-developers app
XperiaNeoVNoob said:
Hey I am not the Infuse user... But I faced similar problem in my xperia some days back after updating the recovery.
I was also not able to enter recovery at boot time using my usual volume down way...
What the change was the new recovery checks for tap on the screen (repeatetive) instead of volume down button...
Not sure if it will work or not for you... But you can give a try...
Hit thanks if it works
Sent from my MT11i using xda app-developers app
Click to expand...
Click to collapse
I didn't get a chance to try it, sorry! I ended up wiping my phone totally back to stock Gingerbread with nothing on the sd card, either, and starting all over again. It seems to be working really well this time (fingers crossed). RemICS-UX is pretty much awesome
VyCariously said:
I didn't get a chance to try it, sorry! I ended up wiping my phone totally back to stock Gingerbread with nothing on the sd card, either, and starting all over again. It seems to be working really well this time (fingers crossed). RemICS-UX is pretty much awesome
Click to expand...
Click to collapse
No probs...
:thumbup:
Sent from my MT11i using xda app-developers app
Ok so I have a rooted infuse 4G and am a complete noob when it comes to flashin roms and mods... I am still on the froyo 2.2.1and hate it lol. Which brings me to my first query, I know its possible to upgrade my android version to the GB and JB with multiple methods but I'm extremely scared that I'm going to brick my phone. It was some forums on here that helped me decide to root my phone so now I'm hoping that you guys can help me take the next step. So whats the safest, easiest way to upgrade my os.. Odin didnt work and I no longer have a computer, so heimdall is out as well. Oh not sure if this is important but I'm not registered on any network nor have I unlocked my phone's sim. Well that's a start. I really hate froyo 2.2.1 so please if anyone can help I definitely could use it.
treyserits said:
Ok so I have a rooted infuse 4G and am a complete noob when it comes to flashin roms and mods... I am still on the froyo 2.2.1and hate it lol. Which brings me to my first query, I know its possible to upgrade my android version to the GB and JB with multiple methods but I'm extremely scared that I'm going to brick my phone. It was some forums on here that helped me decide to root my phone so now I'm hoping that you guys can help me take the next step. So whats the safest, easiest way to upgrade my os.. Odin didnt work and I no longer have a computer, so heimdall is out as well. Oh not sure if this is important but I'm not registered on any network nor have I unlocked my phone's sim. Well that's a start. I really hate froyo 2.2.1 so please if anyone can help I definitely could use it.
Click to expand...
Click to collapse
From Froyo 2.2.1, there is an official build GB 2.3.6 UCLB3 out for the Infuse.
You will need a computer though. Without a computer to restore your phone to stock from soft bricking, you should not be flashing anything. It may be possible for you to bring your phone to an AT&T store and have them update you if you don't have a PC. You will need a computer to root the GB UCLB3.
Where to start? Read the Q/A as much as you can. Then move into the Development section.
http://forum.xda-developers.com/showthread.php?t=1437548 - read it all
thanks
qkster said:
From Froyo 2.2.1, there is an official build GB 2.3.6 UCLB3 out for the Infuse.
You will need a computer though. Without a computer to restore your phone to stock from soft bricking, you should not be flashing anything. It may be possible for you to bring your phone to an AT&T store and have them update you if you don't have a PC. You will need a computer to root the GB UCLB3.
Where to start? Read the Q/A as much as you can. Then move into the Development section.
http://forum.xda-developers.com/showthread.php?t=1437548 - read it all
Click to expand...
Click to collapse
Thanks qkster.. I really appreciate your help. I follow alot of your threads and am so hapoy thst there are infuse users that actually are willing to take the device to the next lvl. Now for another question.
Will it be easier to flash the jellybean 4.1.1 from the froyo or the gb? Or would it be possible to just flash a higher kernel? I'm not syre if that would help me or not, I really want to speed up my infuse and stop it from rebooting so much.
treyserits said:
Thanks qkster.. I really appreciate your help. I follow alot of your threads and am so hapoy thst there are infuse users that actually are willing to take the device to the next lvl. Now for another question.
Will it be easier to flash the jellybean 4.1.1 from the froyo or the gb? Or would it be possible to just flash a higher kernel? I'm not syre if that would help me or not, I really want to speed up my infuse and stop it from rebooting so much.
Click to expand...
Click to collapse
You cannot flash JB from Froyo and need to go to Gingerbread, then ICS then JB.
http://forum.xda-developers.com/showthread.php?t=1878458
Kies?
psal217050 said:
You cannot flash JB from Froyo and need to go to Gingerbread, then ICS then JB.
http://forum.xda-developers.com/showthread.php?t=1878458
Click to expand...
Click to collapse
Would it be best to use kies to update to GB? I'm a little concerned as to what would happen to my Infuse all around.. What will need backed up?
I have titanium backup but if the app gets wiped wont i lose all my back-ups? For some reason it wont sync to my dropbox app force closes every time I try. Sorry about all the questions I'm just short on the amount of time I am able to browse threads at the moment but I do have use of a computer for awhile so that kinda helps.
I personally prefer using odin or heimdall. Don't quite trust kies and it often gives issues.
all mayor changes will occur on system partitions. Your internal sd will remain untouched, and there you will titanium backups. Just reinstall TB app later and restore apps, not data.
Sent from my SGH-I997 using xda app-developers app
Ok well here goes nothing.
andros11 said:
I personally prefer using odin or heimdall. Don't quite trust kies and it often gives issues.
all mayor changes will occur on system partitions. Your internal sd will remain untouched, and there you will titanium backups. Just reinstall TB app later and restore apps, not data.
Sent from my SGH-I997 using xda app-developers app
Click to expand...
Click to collapse
Well I'm going to install and give it a try with Heimdall. I'll let you know how it goes. Thanks everyone for all your help. I'm sure I'll have more questions before long. XD
andros11 said:
I personally prefer using odin or heimdall. Don't quite trust kies and it often gives issues.
all mayor changes will occur on system partitions. Your internal sd will remain untouched, and there you will titanium backups. Just reinstall TB app later and restore apps, not data.
Sent from my SGH-I997 using xda app-developers app
Click to expand...
Click to collapse
Will this even work if i'm not registered to a network with the phone still locked? And I see that it will also unroot my phone which isnt a problem I'm just curious whether or not I can still root with super one click or if i need a different root tool?
treyserits said:
Will this even work if i'm not registered to a network with the phone still locked? And I see that it will also unroot my phone which isnt a problem I'm just curious whether or not I can still root with super one click or if i need a different root tool?
Click to expand...
Click to collapse
It doesn't matter if your phone is unregistered and locked. You cannot use SuperOneClick on Gingerbread. What you should do is (this is the Heimdall version):
Flash this rooted version of stock GB:
http://forum.xda-developers.com/showpost.php?p=25526643&postcount=2
You do that and you already have root.
If you want to then graduate on to Jelly Bean you must:
Flash ICS (follow directions carefully!):
http://forum.xda-developers.com/showpost.php?p=24901014&postcount=1
Once you've done that, flash any of the JB ROMs you like, but make sure to read the directions carefully. I strongly recommend that you consult the Super Everything Thread for links to the ROMs and tweaks you need, particularly if you are interested in unlocking your phone.
http://forum.xda-developers.com/showthread.php?t=1610374
I'm feeling kinda stupid..
Can somebody give me the right link for downloading Heimdall One-click w/root? For some reason I'm not able to get any to work on this computer.. I downloaded the ink provided labeled UCLB3 -DEBLOATED-ODEX - ROOTED - BUSYBOX- STOCK KERNEL on
http://forum.xda-developers.com/showpost.php?p=25526643&postcount=2
but am unsure if that actually is the one containing Heimdall or just the rom i'm flashing or both.. I'm extremely sorry about my noobishness of just posting all these already answered questions. I've gone and confused myself and have like ten tabs with different threads open please don't hate me. I have a bad habit of asking questions..
Oh and what apps do i need on my phone in order to flash? And I mean absolutely need. I've also noticed that most threads say to format my mounted sd card But i really dont want to do that if i dont need to.
It should all be bundled together. Heimdall is a java based interface so it should just open up. Sorry, it's been a long time and I'm an Odin person!
You don't need any apps on your phone. When you flash, everything on the small partition will be wiped (apps, app data, etc). Flashing will not usually wipe your pictures, videos etc. but it's always a good idea to back up. For now, don't worry about formatting anything. When you get to ICS, you'll need to format as it says in the instructions. Otherwise, if it works, don't fix it!
When you flash ICS and JB, all you need to do is to put the zip files on to your internal SD card (not the one you can take out). You can then flash from CWM (which will already be on your phone - don't download Rom Manager).
Once again thank you all. I'm running GB and loving it. My fiance is shocked at how much help I needed though usually I'm the person everyone comes to with their tech issues LOL. But I absolutely did not want to mess my infuse up. I thought I did but the issue was such a noob mistake that I had to smack myself in the face at my stupidity. Forgot to unzip the cwm ect folder I downloaded. XD not sure I'm ready to try ICS or JB yet though.
Sent from my SAMSUNG-SGH-I997 using xda app-developers app
The odd thing is you could have updated to GB through AT&T and used mini kies. But at least you are now rooted and able to go to ICS and JB.
Read the instructions on the next step before moving on.
Sent from my SGH-I997 using xda premium
Kinda wish I would have done it that way... I wanted to get some practice flashing roms tho. And now my phone is bootlooping, computer says the device is incompatible I can only get into the samsung recovery even tho the rom i flashed had cwm packaged in. I tried to change my boot animation following the steps provided in my boot animation thread then again with the steps in tsqers rom thread I apologise if thats mispelled. I tried updating from sd but get a sign error Can get into download mode but same issue with it being incompatible usb device. I tried holding down the power button for 1 minute and then rebooting no luck there. I tried wiping data/fact. reset,... nothing. I tried wipe cache partition,...still looping.
The loop samsung screen two seconds, black screen 1 1/2 seconds,... over and over and over...
My battery is full. Any advice???
treyserits said:
Kinda wish I would have done it that way... I wanted to get some practice flashing roms tho. And now my phone is bootlooping, computer says the device is incompatible I can only get into the samsung recovery even tho the rom i flashed had cwm packaged in. I tried to change my boot animation following the steps provided in my boot animation thread then again with the steps in tsqers rom thread I apologise if thats mispelled. I tried updating from sd but get a sign error Can get into download mode but same issue with it being incompatible usb device. I tried holding down the power button for 1 minute and then rebooting no luck there. I tried wiping data/fact. reset,... nothing. I tried wipe cache partition,...still looping.
The loop samsung screen two seconds, black screen 1 1/2 seconds,... over and over and over...
My battery is full. Any advice???
Click to expand...
Click to collapse
Which ROM did you flash and which CWM recovery can you see (which version)?
I used the http://forum.xda-developers.com/show...43&postcount=2 thread to get the rooted rom UCLB3 -DEBLOATED-ODEX - ROOTED - BUSYBOX- STOCK KERNEL.
Saved I think.
So I finally Got it to connect to my comp and re-flashed the rom can i get a link to an ICS heimdall one click package to flash before restoring anything and this happening again?
You should be able to find it on the ISET page.
http://forum.xda-developers.com/showthread.php?p=32876425
Sent from my SGH-I997 using xda premium
Hi,
I am new to this, my infuse is running stock everything. Firmware 2.3.6, build number: Gingerbread UCKL2.
I would like to upgrade to the latest Jellybean version. I tried to read all tutorials but cant make heads or tails. I was hoping someone could walk me through it all step by step. maybe by messenger or email?
any help would be greatly appreciated.
Okay, first you need to get yourself a cwm recovery.
To do that, flash Entropy's dd kernel.
Qkster has a heimdall one-click which you can use to flash it in download mode.
You will probably also need the GB bootloaders. Qkster also has one for that.
Now you just flash ICS, then a JB rom and you should be done.
There's a guide on my signature which explains all this step by step, with links and everything. I suggest you take a look at it.
andros11 said:
Okay, first you need to get yourself a cwm recovery.
To do that, flash Entropy's dd kernel.
Qkster has a heimdall one-click which you can use to flash it in download mode.
You will probably also need the GB bootloaders. Qkster also has one for that.
Now you just flash ICS, then a JB rom and you should be done.
There's a guide on my signature which explains all this step by step, with links and everything. I suggest you take a look at it.
Click to expand...
Click to collapse
After doing all this, are there any apps that wont work??
mrekimf said:
After doing all this, are there any apps that wont work??
Click to expand...
Click to collapse
OK, after following the "[GUIDE] How to flash JB " on andros11 signature, on the install I) GB to ICS, I used method B. After step 2 in method B, when do I do step 3? It is sitting at title screen that shows, "Galaxy S cyanogen(mod). I did the step 3 then and selected boot recovery, and it just stays on the "Galaxy S cyanogen(mod)" screen. Is it frozen? What did I do wrong?
PLEASE HELP
Yea, it is supposed to hang at that screen.
Take out the battery and boot into recovery with the 3 finger combo (hold both volume buttons and the power button, and let go of power once the samsung logo pops up
andros11 said:
Yea, it is supposed to hang at that screen.
Take out the battery and boot into recovery with the 3 finger combo (hold both volume buttons and the power button, and let go of power once the samsung logo pops up
Click to expand...
Click to collapse
So how long is it suppose to hang like that? Minutes, hour?
Also when in recovery it say on bottom of screen(log I guess) cache couldn't mount?
It hangs because you now have an ICS kernel with a GB system, so it won't boot.
If you do the 3-finger combo correctly it should boot to the recovery. Now you just need to flash a JB Rom and the corresponding gapps
Hi all,
I had a rooted GB 2.3.6 done with the Odin method here and I just upgraded to ICS and CM9 via the Entropy and everything worked ok, including making phone calls.
Then I went ahead and installed SlimBean 3.0/SlimGapps and I seem to be unable to make phone calls because it says Broadband version: Unknown. I'm now on JB 4.2.2 on SGH-1997
I am on Samsung Infuse 4G with ATT and I am not sure how to restore my mobile radio network. Can someone help me how to restore my phone calling feature and HSPA+ data network? Do I need to flash something?
Thanks,
Fanirama, try flashing cm10. That usually restores the IMEI.
Then flash back to slim and hopefully you'll be good
andros11 said:
Fanirama, try flashing cm10. That usually restores the IMEI.
Then flash back to slim and hopefully you'll be good
Click to expand...
Click to collapse
Great! That did the trick... I flashed CM10.1 and IMEI is back along with everything else.
Maybe I'll stick with CM10 for sometime and see how it goes. I kinda preferred Slimrom from what I saw of it - it was very zippy, very polished with very few bugs from limited testing I did on main features.
Sadly in all this fiasco, I lost all my contacts which is a major bummer. Hopefully Titanium Backup which I did kept my contacts.
Thank you very much for your help. I was planning on flashing Carbon next but I think CM was a better suggestion.
Can I upgrade my wifes Samsung i897(captivate) with the same stuff as I did with Infuse. Is it upgradable to JB?
Nope.. You'll want to visit the captivate forums to see what is available. Many good devs over there.
Sent from my SAMSUNG-SGH-I997 using xda premium
Zen Arcade said:
Nope.. You'll want to visit the captivate forums to see what is available. Many good devs over there.
Sent from my SAMSUNG-SGH-I997 using xda premium
Click to expand...
Click to collapse
thank you , heading that way now!