Hello, I am a long-time viewer of xda but a new member, this is my first post.
(and yes, i looked for a similar theard. i could not find one.)
So, onto the problem.
I flashed Infinitum 1.1.1 to my Infuse using cwm recovery. I noticed problems right off the bat when after i had installed the zip, i rebooted into recovery then it got stuck on the samsung logo and i had to pull the battery (a normal event when flashing this rom) So when i pulled the battery and booted into recovery to try again, the cwm recovery was terribly screwed up. The top half of the screen was pixelated, and the navigation menu was off center. I was still able to use cwm to flash the rom successfully, But cwm remains srewed up.
So i tried to reflash cwm recovery using rom manager. but when i rebooted i was stuck in a recovery boot-loop that i had to get out of using odin.
I then flashed the rom again using the same procedure suggested by its developer, and it worked, but cwm is still acting as it was before. (the pixelated top half of the screen and the off center navigation menu. )
So can i get some help? i thought about removing cwm the using some other recovery. I also heard that cwm wont work on ics, but im unsure what it is.
Thanks in advance.
You don't have Gingerbread bootloaders. That's why recovery looks the way it does.
You need to Odin or Heimdall back to Gingerbread stock (I find Heimdall much easier for this) and then flash Entropy's DD kernel to get back into red recovery to flash Infinitum.
Posts 1 and 2 in this thread are what you need: http://forum.xda-developers.com/showthread.php?t=1524081
lukas_s said:
You don't have Gingerbread bootloaders. That's why recovery looks the way it does.
You need to Odin or Heimdall back to Gingerbread stock (I find Heimdall much easier for this) and then flash Entropy's DD kernel to get back into red recovery to flash Infinitum.
Posts 1 and 2 in this thread are what you need: http://forum.xda-developers.com/showthread.php?t=1524081
Click to expand...
Click to collapse
I i came from froyo, and is there a way to get the bootloaders without reverting to gingerbread stock?
Hard2thexcore said:
I i came from froyo, and is there a way to get the bootloaders without reverting to gingerbread stock?
Click to expand...
Click to collapse
Yeah, ICS recovery doesn't play nice with Froyo bootloaders.
AFAIK, there is no way to get Gingerbread bootloaders without reverting to stock. With Heimdall it's an incredibly simple, and quick process. I just had to do it myself a couple nights ago
lukas_s said:
Yeah, ICS recovery doesn't play nice with Froyo bootloaders.
AFAIK, there is no way to get Gingerbread bootloaders without reverting to stock. With Heimdall it's an incredibly simple, and quick process. I just had to do it myself a couple nights ago
Click to expand...
Click to collapse
Thank man, one more thing, will going back to gingerbread stock work if the only time i have ever used gingerbread was when i used the Zeus rom. The only other thing i have had besides zeus and this ics rom was froyo.
Hard2thexcore said:
Thank man, one more thing, will going back to gingerbread stock work if the only time i have ever used gingerbread was when i used the Zeus rom. The only other thing i have had besides zeus and this ics rom was froyo.
Click to expand...
Click to collapse
Yup, it'll work just fine
Just follow all the instructions for Heimdall to a T (there aren't many) and everything will be fine
Yeah...heimdal is the best way to get bootloaders...odin doesnt always do it and no custom rom includes them that i am aware of...
I had written detailed instructions for another person...ill try and find them and paste it here...
Also-dont use rom manager, that thing is known to cause bricks/bootloops so using it is asking for bad ju-ju lol
Sent from my SAMSUNG-SGH-I997 using XDA
mg2195 said:
Have you tried flashing boot loaders?
Here is how to do it...
1) Download uclb3 heimdal by qckster
2) open the program
3) put phone in download mode
4) click flash (leave program open when finished DO NOT CLOSE)
5) after it finishes and your phone reboots, put the phone back in download mode and reconnect to PC
6) click flash bootloader on the heimdal program you left running
7) flash, let reboot and your problems should be gone
Download mode instructions
1) pull battery
2) put battery back in
3) hold volume up + down
4) connect phone to PC with USB cable *don't let go of volume*
Just because you were on gingerbread previously does nit mean you have ginger bread boot loaders...I had ginger bread since the first leaks and did not have boot loaders until a month or two ago when I flashed them using those steps above...
Good luck!
Sent from my SGH-I997 using XDA
Click to expand...
Click to collapse
There you go...follow those instructions and your cwm will be fixed!!!
Also just added it to my op of infinitum...
Sent from my SAMSUNG-SGH-I997 using XDA
Thank you for posting the guide. I literally just got done flashing GB bootloaders to my Infuse because of the rainbow Recovery when I'm on ICS. I used Odin though and used GB loader that a member posted in the AOKP Uniporn thread. I was scared but there really isn't anything to be afraid of. I tried using Heimdall but dang that was nerve racking because I was trying to use it on Mac and it wouldn't let me do the flash.
Jammol said:
Thank you for posting the guide. I literally just got done flashing GB bootloaders to my Infuse because of the rainbow Recovery when I'm on ICS. I used Odin though and used GB loader that a member posted in the AOKP Uniporn thread. I was scared but there really isn't anything to be afraid of. I tried using Heimdall but dang that was nerve racking because I was trying to use it on Mac and it wouldn't let me do the flash.
Click to expand...
Click to collapse
Good deal, glad you got it sorted out. And to clear up some confusion that is in this thread: you don't have to flash an entire Gingerbread rom to get the bootloaders. We all have our preferred ways of doing it, but you CAN flash just the bootloaders.
Here is both a Heimdall and an Odin way to get JUST the bootloaders. That's all that is necessary for someone who has rainbow distortion issues on an ICS or Gingerbread rom.:
See the third post (HERE) in Entropy512's Unofficial CM9 thread for instructions on how to flash just the bootloaders using the Heimdall command line. Or, see the answer to question 1.) in the FAQ of the rooted UCLB3 Odin thread which is HERE.
mg2195 said:
Yeah...heimdal is the best way to get bootloaders...odin doesnt always do it
Click to expand...
Click to collapse
Heimdall is one way to get the bootloaders, and here's how I did it.:
heimdall flash --primary-boot boot.bin --secondary-boot Sbl.bin
The second part of your statement isn't true. Odin doesn't do it only when the user can't figure out how to use Odin.
thank you everyone.
Being a creature of habit i ended up flashing to rom and bootloaders using odin. that did indeed fix CWM right up.
GB loader
Jammol said:
Thank you for posting the guide. I literally just got done flashing GB bootloaders to my Infuse because of the rainbow Recovery when I'm on ICS. I used Odin though and used GB loader that a member posted in the AOKP Uniporn thread. I was scared but there really isn't anything to be afraid of. I tried using Heimdall but dang that was nerve racking because I was trying to use it on Mac and it wouldn't let me do the flash.
Click to expand...
Click to collapse
I am trying to get those GB Bootloaders. Would you be able to provide them ? or to provide the AOKP Uniport thread ?
RemiChartier said:
I am trying to get those GB Bootloaders. Would you be able to provide them ? or to provide the AOKP Uniport thread ?
Click to expand...
Click to collapse
Unfortunately I haven't had this device for over 3 years now. You'll have to do some searching for that.
Jammol said:
Unfortunately I haven't had this device for over 3 years now. You'll have to do some searching for that.
Click to expand...
Click to collapse
Thanks, I have found the GG boot.bin and sbl.bin in another thread, I will update later on this thread.
RemiChartier said:
Thanks, I have found the GG boot.bin and sbl.bin in another thread, I will update later on this thread.
Click to expand...
Click to collapse
Where did you find them? Please share...
Related
Well everyone here is the moment we have all been waiting for a little GB love for our SGS4G http://hotfile.com/dl/121009639/fc3e54d/T595VUVKF1.rar.html down load file run through odin Gingerbread Goodness credit to birgertime for the find.
Password For the file is samfirmware.com
This Rom is not Rooted
Currently no way to get back to our own roms right now with that GB rom! I cannot for the life of me restore my backups.
Eric-1987 said:
Currently no way to get back to our own roms right now with that GB rom! I cannot for the life of me restore my backups.
Click to expand...
Click to collapse
Sorry for your woes. Hope u get things worked out. If you do get things worked out wait until one of the devs fixes this issue. I'm sure well see a deodexed version soon, I hope.
Sent from my SGH-T959V using XDA Premium App
I love it, downloading right now. Lets see how our phone files
This is huge. Has anyone rooted this yet? That's the question. Superoneclick doesn't seem to do the trick.
Sent from my SGH-T959V using XDA Premium App
Eric-1987 said:
Currently no way to get back to our own roms right now with that GB rom! I cannot for the life of me restore my backups.
Click to expand...
Click to collapse
pretty sure you need a root before you can do that buddy
Eric-1987 said:
Currently no way to get back to our own roms right now with that GB rom! I cannot for the life of me restore my backups.
Click to expand...
Click to collapse
You can odin a ROM that's gotten rooted so you can use quickreboot or adb to get into recovery mode, then you can use CWM from there if you had it installed already. I just had to flash an old rooted ROM to be able to get to recover my CWM backup.
EDIT:
OP, by the way the password for the file at that link is
samfirmware.com
FBis251 said:
You can odin a ROM that's gotten rooted so you can use quickreboot or adb to get into recovery mode, then you can use CWM from there if you had it installed already. I just had to flash an old rooted ROM to be able to get to recover my CWM backup.
EDIT:
OP, by the way the password for the file at that link is
samfirmware.com
Click to expand...
Click to collapse
Thanks will update original post
Ah man I just got my phone to my liking lol.
I think I'll wait a bit though as this is almost like a KC1 for froyo. Leaked build, so there will probably be a final build avail via OTA and Kies.
nothing better to do might as well flash and play lol worse comes to worse can always odin back and recover with clockwork
super!
flashing rite now. let you guys know how it goes later.
Just curious ....Anyone else not able to get into download mode or stock recovery via ANY METHOD ?
Bl4ckpheniX said:
Just curious ....Anyone else not able to get into download mode or stock recovery via ANY METHOD ?
Click to expand...
Click to collapse
That would be no bueno. Definitely interested to hear if you can get into Download mode, recovery not as much. DL at least you have ODIN.
^^uh oh
10chara
I tried to flash without the bootloader using Heimdall so I can flash back. it finished flashing but wont boot to the OS. so I Odined back to KD1.
try the home button should allow u to flash back via odin
fknfocused said:
^^uh oh
10chara
Click to expand...
Click to collapse
I think on the galaxy s phones they couldn't get into recovery or dl mode unless they flashed the gingerbread boot loader
Sent from my HTC Glacier using XDA Premium App
Just flashed with no problem. Everything seems to work fine. I dont see much changes just some of the menu settings. Phone seems to run smooth. Gonna use it for a bit and let you guys know.
Thanksssssssssssssssss!!!
To going to download mode first you must open ODIN. Assume your phone is off. Then press and hold the volume + and - then plug the USB to your PC. You should see a BIG yellow triangle on the phone said Download mode. Hope this helps.
Keymapping is changed in GB. Not familiar with your phone nut on the original Vibrant GB bootloaders now require one volume key instead of two.
I have rooted my phone, and am trying to put miui on it. I have a Samsung Galaxy S Infuse 4G Rogers. I have looked for instructions on how to do the 3e recovery mod so I can put miui on my phone, but I can't get it to work. I am not even 100% sure I'm on the right track. All the instructions I find are confusing as they ask to put files on but don't have links to download the files, or they just assume I know how to do something, or know what they are referencing. I have rooted my phone, now I want to put miui on. I would be greatly appreciative if someone could give me a hand. Thank you.
Danthetemp said:
I have rooted my phone, and am trying to put miui on it. I have a Samsung Galaxy S Infuse 4G Rogers. I have looked for instructions on how to do the 3e recovery mod so I can put miui on my phone, but I can't get it to work. I am not even 100% sure I'm on the right track. All the instructions I find are confusing as they ask to put files on but don't have links to download the files, or they just assume I know how to do something, or know what they are referencing. I have rooted my phone, now I want to put miui on. I would be greatly appreciative if someone could give me a hand. Thank you.
Click to expand...
Click to collapse
Start here:
http://www.youtube.com/watch?v=Y09p-J_g_Rg
http://www.youtube.com/watch?v=mT8AGePdm9I
http://forum.xda-developers.com/showthread.php?t=1293751
qkster said:
Start here:
http://www.youtube.com/watch?v=Y09p-J_g_Rg
http://www.youtube.com/watch?v=mT8AGePdm9I
http://forum.xda-developers.com/showthread.php?t=1293751
Click to expand...
Click to collapse
The first link is for at&t not rogers. Just looking for a guide to put miui on my already rooted Samsung infuse with rogers .
It should also work on rogers
Sent from my SAMSUNG-SGH-I997 using xda premium
dman3285 said:
It should also work on rogers
Sent from my SAMSUNG-SGH-I997 using xda premium
Click to expand...
Click to collapse
It doesn't as the recovery file is in a different folder, and every time you replace with the modded file, after reboot, the old one is replaced back where it was. The AT&T method does not work for rogers. I understand that at least now haha.
Just looking for someone to give me step by step on how to put miui on rogers samsung infuse.
Danthetemp said:
It doesn't as the recovery file is in a different folder, and every time you replace with the modded file, after reboot, the old one is replaced back where it was. The AT&T method does not work for rogers. I understand that at least now haha.
Just looking for someone to give me step by step on how to put miui on rogers samsung infuse.
Click to expand...
Click to collapse
MIUI is tricky. I think to get the latest galnet running, you have to mod and flash the older MIUI first. Jump thru a bunch of pull battery trick before boot up then flash the newer version.
there was some source code issue with xda and muiu link was removed. idk if it was reposted or not.
You may have better luck going back to the muiu dev thread.
otoh, if you wanted Zeus, Bionix, Numas, Victory, you can start with the above.
I don't think rogers or att makes a big different. Same hardware.
as for modded recovery, are you sure are using root explorer correctly?
The simpler method i had luck with is to use adam's heimall oneclick uckj4. then flash a second time with boot loader box checked if you don't already have BL.
then flash the defuse kernel in the second post to give you red recovery. then flash away with rom of choice
edit: if you are already rooted, couldn't you just DL sgskernel flasher from market, and flash gtg's kernel to give you red cwm/voodoo lag fix and then flash the rom of choice? - check out gtg's original post on the pin up.
http://forum.xda-developers.com/showthread.php?t=1220090
Yeah, the first YOUTUBE link bricked my Infuse.
Thanks
bulltproof said:
Yeah, the first YOUTUBE link bricked my Infuse.
Thanks
Click to expand...
Click to collapse
The YT vids sets the background.
I'm sorry to hear you softbricked your phone..usually from not following or incorrectly applying the methods...
Look at my later post,
I prefer method is to use adam's heimdall uckj4 one click and follow through all the way until after flashing the defuse kernel to get cwm
if you're soft brick, that will also restore your phone with gb bl.
softbrick is part of learning too...check out my funny read post for s&g
qkster said:
The YT vids sets the background.
I'm sorry to hear you softbricked your phone..usually from not following or incorrectly applying the methods...
Look at my later post,
I prefer method is to use adam's heimdall uckj4 one click and follow through all the way until after flashing the defuse kernel to get cwm
if you're soft brick, that will also restore your phone with gb bl.
softbrick is part of learning too...check out my funny read post for s&g
Click to expand...
Click to collapse
I got it up and going again. I used GTG Unbrick guide.
I tried using Heimdall after that. It came back with an error on the kernel.
I almost hate android devices. There's such a learning curve for rooting/romming every device.
Now I am back to stock after using GTG Unbrick again.
This is a fairly new phone...
SGH-I997 SW VER I997UCKH1 <<-- what it says on the phone box.
What it says in "About Phone"
Model Number
Samsung SGH-I997
Firmware Version
2.2.1
Baseband Version
I997UCKD5
Kernel Version
2.632.9
Build Number
FROYO.UCKD5
Any advice?
bulltproof said:
I got it up and going again. I used GTG Unbrick guide.
I tried using Heimdall after that. It came back with an error on the kernel.
I almost hate android devices. There's such a learning curve for rooting/romming every device.
Now I am back to stock after using GTG Unbrick again.
This is a fairly new phone...
SGH-I997 SW VER I997UCKH1 <<-- what it says on the phone box.
What it says in "About Phone"
Model Number
Samsung SGH-I997
Firmware Version
2.2.1
Baseband Version
I997UCKD5
Kernel Version
2.632.9
Build Number
FROYO.UCKD5
Any advice?
Click to expand...
Click to collapse
Looks like you're back to stock. I like heimdall but it looks like Odin is what you're comfortable with.
In this qa section, gtg has a thread up for infused v2 rom. You can start there. Go with cwm installation.
Just make sure you have the roms of your choice already downloaded. Instead of using the infused rom, just flash the one of your choice.
Gl
Remember to wipe cache and dalvik cache in the advance setting s of cwm
I'm lost! I've rooted my At&t Samsung Infuse. I'm still stock. I've read a few threads I've downloaded 3e Recovery it shows up as NewStock.tar.md5 every video or post I can find demonstrates or goes through steps saying recovery. I tried following along with videos I get stuck in the root explorer because I can't find the recovery to paste the NewStock.tar.md5 file to all I come across is reboot. Can anyone help?
Sent from my SAMSUNG-SGH-I997 using XDA App
SuperReal87 said:
I'm lost! I've rooted my At&t Samsung Infuse. I'm still stock. I've read a few threads I've downloaded 3e Recovery it shows up as NewStock.tar.md5 every video or post I can find demonstrates or goes through steps saying recovery. I tried following along with videos I get stuck in the root explorer because I can't find the recovery to paste the NewStock.tar.md5 file to all I come across is reboot. Can anyone help?
Sent from my SAMSUNG-SGH-I997 using XDA App
Click to expand...
Click to collapse
Is this the video that you meant?
http://www.youtube.com/watch?v=PkMo8rBehHg
is this where you got the file?
http://forum.xda-developers.com/showthread.php?t=1091465
edit: this may be a better way:
http://forum.xda-developers.com/showthread.php?t=1220090
follow the cwm installation method
OK I'm in front of the weirdest thing I've ever seen in my Android life. Turns out I got my Infuse 4G and turn it back to stock AT&T Gingerbread 2.3.6 using Heimdall One-click Back-To-Stock UCLB3, and in the middle of process it seems my USB port disconnected my phone and I though I would see a brick, but thank God it was not that bad (I thought). I change the USB port and put my Infuse in download mode again, passed the tool again and everything went like heaven (again: I thought). I got my stock AT&T Gingerbread 2.3.6, but I never seen CWM anymore, I just can't because the weirdest screen I've ever seen (you'll see).
I thought my phone was unrooted, so I maded my way straight to SuperOneClick v2.3.3 and begin the simplest process. Well... it was unable to root my phone and believe me, it's not ADB problems, I know it because I can install apps through Android Commander without any problem... so that's the first weird thing I have here.
Until that moment I thought my phone was bad-flashed or something, so I tried with another tool, the mythic Odin with h8rift's [UCKD5] Odin - Stock (Root+3e) and with my device in download mode it never shown itself as COM## on Odin (required to start the process), however I clicked on PDA button, selected the .tar.md5 file and start the process that never started (logically).
So right now I have no idea what to do or where to go.
I'm apologize if I explain every little detail, the thing is that most of the time one get answers starting with "You did this?" "Have you tried that?" I all I want is to avoid that. For example, I have USB debugging, ok? Another thing someone could ask.
Please help me guys. I madded a video so you can see what happens when I try to enter CWM. Even when my phone starts, during AT&T logo screen flashes with a strange distortion. I madded this video and post it to YouTube so you can see what is hard for me to explain.
Please HELP!
I need anything that from scratch clean everything and put my phone shiny.
Best regards.
You have "rainbows" because you don't have Gingerbread bootloaders.
You need to use odin a GB leak or Heimdall a GB leak to correct the problem.
Your initial failed flash on heimdall was due to a bad connection -usb data cord or computer usb port.
qkster said:
You have "rainbows" because you don't have Gingerbread bootloaders.
You need to use odin a GB leak or Heimdall a GB leak to correct the problem.
Your initial failed flash on heimdall was due to a bad connection -usb data cord or computer usb port.
Click to expand...
Click to collapse
Man I thank you with all my heart... can you give me some resource? Sorry to bother you with that, the problem is I've been reading since yesterday and my head is about to explode.
Please I'll appreciate it.
Best regards.
Stickied "Super Thread" in Development.
Sent from my SAMSUNG-SGH-I997 using xda premium
Radiotsar said:
Stickied "Super Thread" in Development.
Sent from my SAMSUNG-SGH-I997 using xda premium
Click to expand...
Click to collapse
Thanks, I'll check it right now
alainalemany said:
Man I thank you with all my heart... can you give me some resource? Sorry to bother you with that, the problem is I've been reading since yesterday and my head is about to explode.
Please I'll appreciate it.
Best regards.
Click to expand...
Click to collapse
There are some links on my signature line, including the superthread.
If reading right, you are on uclb3 now. Soc can't root that. I don't think anything can. You have to load another kernel. Like qkster said see his sig. I used both uclb3 packages two night ago. Both work.
(thanks qk)
Sent from my SAMSUNG-SGH-I997 using Tapatalk
Well that is really a super thread... right now I have no idea what to do, where to go. Please can anyone tell me which option take in order to disappear this "rainbows", root my Infuse and finally can install whatever ROM I want?
Best regards.
EDIT: OK I've installed (again) Heimdall UCLB3 2.3.6 but with the Flash Bootloader box checked and everything goes like heaven, NO MORE RAINBOWS However I can't root it with SuperOneClick v2.3.3, why is that? How can I root it?
Best regards.
I see you have not read either the original post
http://forum.xda-developers.com/showthread.php?t=1524081
there clearly says that the only way to root in 2.3.6 is by flashing DD Entropy512's kernel.
kalebdevil said:
I see you have not read either the original post
http://forum.xda-developers.com/showthread.php?t=1524081
there clearly says that the only way to root in 2.3.6 is by flashing DD Entropy512's kernel.
Click to expand...
Click to collapse
OK I flashed Entropy512's kernel correctly but the problem is now I see only Samsung logo, I'm stuck there. However I can see a red CWM.
qkster said:
You have "rainbows" because you don't have Gingerbread bootloaders.
You need to use odin a GB leak or Heimdall a GB leak to correct the problem.
Your initial failed flash on heimdall was due to a bad connection -usb data cord or computer usb port.
Click to expand...
Click to collapse
Why is it that you can go from froyo stock rooted with cwm recovery straight to flashing zeus for example? What step added the gingerbread bootloaders? Just trying to learn myself!
Sent from my SAMSUNG-SGH-I997 using XDA App
SnowBeer said:
Why is it that you can go from froyo stock rooted with cwm recovery straight to flashing zeus for example? What step added the gingerbread bootloaders? Just trying to learn myself!
Sent from my SAMSUNG-SGH-I997 using XDA App
Click to expand...
Click to collapse
from froyo with recovery, you can flash any rom. bypassing the bootloader.
a lot of people do this w/o prob until they run into recovery issue.
i'm not sure re: the exact architecture why this occurs.
the kernel gurus can tell you more.
if you use odin, and install one the gb leaks, you will have that BL, until you do a repartition with gtg's ultimate unbrick which brings you back to froyo. I think you will lose the bl's.
In good practice, I use the 1click heimdall w/ repartition - these are packaged with "official" GB leaks. imho, i believe they are better suited for a base to get to your custom GB rom.
if you're running infused 1.6, there is no needed 'cause it's froyo.
no rainbows there
edit: to each his/her own i guess. the reason why gtg's "unbrick" seems like a life saver is due to repartition with PIT files image.
the heimdall 1 click does the same thing but takes the guess work out from the inexperience user.
i have rooted my infuse 4g using odin using this thread http://forum.xda-developers.com/showthread.php?t=1613523. but after installing this my phone was okay, then after i took backup thru cwm, after that i installed rom of jellybean and after installing it my phone cant start, so i took battery out and again go to recovery mod and try to restore it but i m facing same problem, my phone not starting, even usb mount also not working,
i have format my infuse again and try to do it with odin again but it shows that
E: failed to mount/dbdata(file exist)
E: copy_dbdate_media:cant mount /dbdate
your storage not prepared yet, please use UI menu for format and reboot action.
media files copy failed.
please help me. i m worried about it coz just yesterday i bought it new. so please please help me.
i dont know what is UI menu also.
If you had read the OP, you can't go directly to JB, you have to be on ICS, then flash JB.
Which option did you use from that page? I've used "I997UCLB3-root.rar" many times. But sometimes it gets stuck and I have to pull the usb cable and start over.
So, use I997UCLB3-root.rar, to go back to stock GB. Then flash an ICS rom, reboot. Then flash a JB rom.
Truckerglenn said:
If you had read the OP, you can't go directly to JB, you have to be on ICS, then flash JB.
Which option did you use from that page? I've used "I997UCLB3-root.rar" many times. But sometimes it gets stuck and I have to pull the usb cable and start over.
So, use I997UCLB3-root.rar, to go back to stock GB. Then flash an ICS rom, reboot. Then flash a JB rom.
Click to expand...
Click to collapse
Thank you for your reply but i have tried directly to go to jellybean from GB 2.3.6 and i also tried now to root again using I997UCLB3-root.rat but then also my phone giving same error that E: cant mount and samsung logo come only
huseniezzaz said:
Thank you for your reply but i have tried directly to go to jellybean from GB 2.3.6 and i also tried now to root again using I997UCLB3-root.rat but then also my phone giving same error that E: cant mount and samsung logo come only
Click to expand...
Click to collapse
Flashing JB is a big leap. Some reading, specially when you are new, could have saved you the trouble. But well, now is time to learn the hard way.
Download any uclb3 back to stock pack, either Odin or heimdall. Put your phone in download mode:
1) take out battery and place it back.
2) while holding vol + & - , connect your phone with a usb cable already inserted into the Pc.
Once in download mode, see if your phone is detected by odin or heimdall. If not you may need to install the drivers.
When all is ready, hit start.
*you probably don't have GB bootloaders. That will cause rainbows in your recovery when flashing ics and jb. If you feel you cant live with them, you will need to flash them.*
To flash jellybean, 1st flash any ics rom following directions coming from GB in the OP. Once you have blue recovery, flash JB with the directions in the rom OP.
Sent from my sweet & buttery Infuse
huseniezzaz said:
Thank you for your reply but i have tried directly to go to jellybean from GB 2.3.6 and i also tried now to root again using I997UCLB3-root.rat but then also my phone giving same error that E: cant mount and samsung logo come only
Click to expand...
Click to collapse
read this, should help
http://forum.xda-developers.com/showthread.php?t=1776129
This too
http://forum.xda-developers.com/showthread.php?t=1437548
Thank you thank you thank you
andros11 said:
Flashing JB is a big leap. Some reading, specially when you are new, could have saved you the trouble. But well, now is time to learn the hard way.
Download any uclb3 back to stock pack, either Odin or heimdall. Put your phone in download mode:
1) take out battery and place it back.
2) while holding vol + & - , connect your phone with a usb cable already inserted into the Pc.
Once in download mode, see if your phone is detected by odin or heimdall. If not you may need to install the drivers.
When all is ready, hit start.
*you probably don't have GB bootloaders. That will cause rainbows in your recovery when flashing ics and jb. If you feel you cant live with them, you will need to flash them.*
To flash jellybean, 1st flash any ics rom following directions coming from GB in the OP. Once you have blue recovery, flash JB with the directions in the rom OP.
Sent from my sweet & buttery Infuse
Click to expand...
Click to collapse
I got my phone back. its working in 2.3.6 very nicely once again. thank you so much for response. i am very happy to see my phone start and i am smiling after 3 hours. huh. now i rooted it with odin I997UCLB3-CWM-root-deodex-extras.rar. now can you please tell me how can i install JB? i m curiously waiting to JB in my infuse. please make it JB.
huseniezzaz said:
I got my phone back. its working in 2.3.6 very nicely once again. thank you so much for response. i am very happy to see my phone start and i am smiling after 3 hours. huh. now i rooted it with odin I997UCLB3-CWM-root-deodex-extras.rar. now can you please tell me how can i install JB? i m curiously waiting to JB in my infuse. please make it JB.
Click to expand...
Click to collapse
The first link I posted for you will walk you through it. Read all the instructions, re-read, look up anything you don't understand, and then follow the directions.
huseniezzaz said:
I got my phone back. its working in 2.3.6 very nicely once again. thank you so much for response. i am very happy to see my phone start and i am smiling after 3 hours. huh. now i rooted it with odin I997UCLB3-CWM-root-deodex-extras.rar. now can you please tell me how can i install JB? i m curiously waiting to JB in my infuse. please make it JB.
Click to expand...
Click to collapse
As others mentioned, you first need to install an ICS ROM, like CM9 or Uniporn. The first time you flash you will prob get stuck in a boot loop and will need to use the three finger method to get back to recovery. In case you don't know what that means, you hold the volume keys and power button to turn phone on and then release only the power button when the Samsung logo shows. When u get back to recovery, flash the same ROM a second time and then it will boot.
You will now have blue recovery so you can flash the jb ROM of choice by following the method in the OP for that ROM. Remember to pull out the external sdcard if you have one.
Also, as others have mentioned, you may not have GB bootloaders. To get them, go to the "ISET infuse everything thread" which is stickied in the dev section. You will find Odin and Heimdall packages which have the bootloaders there. Be very careful when installing bootloaders (test usb with a kernel or something less dangerous first) bc if it fails while trying to flash the bootloaders, it can hard brick your phone. And then thank bigjoe for putting together the ISET thread so all infuse users can find everything we need in one place.
Sent from my SGH-I997 using xda app-developers app
Thank you thank you thank you
benbos_06 said:
As others mentioned, you first need to install an ICS ROM, like CM9 or Uniporn. The first time you flash you will prob get stuck in a boot loop and will need to use the three finger method to get back to recovery. In case you don't know what that means, you hold the volume keys and power button to turn phone on and then release only the power button when the Samsung logo shows. When u get back to recovery, flash the same ROM a second time and then it will boot.
You will now have blue recovery so you can flash the jb ROM of choice by following the method in the OP for that ROM. Remember to pull out the external sdcard if you have one.
Also, as others have mentioned, you may not have GB bootloaders. To get them, go to the "ISET infuse everything thread" which is stickied in the dev section. You will find Odin and Heimdall packages which have the bootloaders there. Be very careful when installing bootloaders (test usb with a kernel or something less dangerous first) bc if it fails while trying to flash the bootloaders, it can hard brick your phone. And then thank bigjoe for putting together the ISET thread so all infuse users can find everything we need in one place.
Sent from my SGH-I997 using xda app-developers app
Click to expand...
Click to collapse
Thank you so much, i have flashed JB successfully and GAPPs also. thank you once again. i followed your method and its very easy. first CWM was red i flash JB and after that i pull battery and start CWM at that time it was Blue and i flashed, now its installed.
One more HAPPY INFUSE OWNER.
Is this forum group great, or what!!!!!!
benbos_06 said:
As others mentioned, you first need to install an ICS ROM, like CM9 or Uniporn. The first time you flash you will prob get stuck in a boot loop and will need to use the three finger method to get back to recovery. In case you don't know what that means, you ...
Click to expand...
Click to collapse
I think if you don't know what "that" means...it means you have not read anything you probably need to read on this forum. and probably should not even be thinking about JB let alone trying to flash it.
No slight on you benbos_06, I thought it was funny reading uninformed posts about "rainbow colors" in their their recovery a few months ago...now it's almost kind of sad to see the uninformed trying to go JB...and needing double flash and 3 finger to recovery detailed in step by step instructions. Jeeze!!! That's a little scary.
Sent from a de-FUNKt Infuse
Smokestack360 said:
I think if you don't know what "that" means...it means you have not read anything you probably need to read on this forum. and probably should not even be thinking about JB let alone trying to flash it.
No slight on you benbos_06, I thought it was funny reading uninformed posts about "rainbow colors" in their their recovery a few months ago...now it's almost kind of sad to see the uninformed trying to go JB...and needing double flash and 3 finger to recovery detailed in step by step instructions. Jeeze!!! That's a little scary.
Sent from a de-FUNKt Infuse
Click to expand...
Click to collapse
+ 100... right on, Smoke !!
Hello everyone,
It's my first time witnessing this issue, I do have a Samsung Galaxy S 4G. So I decided to upgraded Eclairs to Gingerbread. Which I did.
Somehow I downloaded the CM7 ROM in the SGS 4G section, I have flashed it and now everytime I click "reboot system now", it's just putting me back to CWM Recovery over and over again. Now I got tired of it, so I tried flashing the SlimBean in hopes of making my device work the way they should, but it's the same result. When I cleared data, flashed the ROM and Gapps and when I click "reboot system now", It shows the boot screen but then it transferred me back to recovery. I don't really know what to do.
Urgent help needed. Thank you all.
can you acess into download mode?
PuNeTZzZ said:
can you acess into download mode?
Click to expand...
Click to collapse
Yes I can, also tried it with CM9, same results it shows recovery everytime. I need some help. :crying:
You say you went from Eclair (Did this phone even come with that? I thought it started with Froyo. Huh. At least, mine did.) to Gingerbread. Is the Gingerbread you started with CM7, or did you start with one that actually has normal GB bootloaders first? Because if you haven't yet, as with any major bootlooping issue, you'll want to use a proper GB one-click. If you failed to double-flash one of those to get the GB bootloaders earlier, do that ASAP. And hope hard that they come.
You are missing the boot loader if you went straight to Gingerbread. Use Heimdall One Click to flash to Gingerbread. Also click on the bootloader option as well when you flash.
Sent from my SGH-T959V using xda premium
Theraze said:
You say you went from Eclair (Did this phone even come with that? I thought it started with Froyo. Huh. At least, mine did.) to Gingerbread. Is the Gingerbread you started with CM7, or did you start with one that actually has normal GB bootloaders first? Because if you haven't yet, as with any major bootlooping issue, you'll want to use a proper GB one-click. If you failed to double-flash one of those to get the GB bootloaders earlier, do that ASAP. And hope hard that they come.
Click to expand...
Click to collapse
Can you give me the names of the GB one-click?
Search for lumin30. He has an awesome guide and links to what you are looking for. It's in his signature.
I'll add, back up your .efs folder. Put copy on your computer.
champ1919 said:
Search for lumin30. He has an awesome guide and links to what you are looking for. It's in his signature.
I'll add, back up your .efs folder. Put copy on your computer.
Click to expand...
Click to collapse
Can anyone tell me this guide works on starting from a CM7 Rom. I don't get it at all. Since it started from Stock Froyo.