I'm need to have the following, but cannot find a working link. Any ideas?
InlineFlashing_edison_5.5.175.16_cfc_p3_APBP_CID28 5.zip
Thank you.
just use this. you plug your phone into you computer and run the .bat file to return to stock. http://forum.xda-developers.com/showthread.php?t=1539167&page=2
rob219 said:
just use this. you plug your phone into you computer and run the .bat file to return to stock. http://forum.xda-developers.com/showthread.php?t=1539167&page=2
Click to expand...
Click to collapse
Will this work on widows vista? Rsd wont, so thats why I am asking.
Sent from my MB865 using xda premium
tmease1 said:
Will this work on widows vista? Rsd wont, so thats why I am asking.
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
yes, this is made for windows computers and will work. uzip it and run the returntostoxk.bat file it will confirm your phone is connected (you have to be in fastboot mode) and after that just press enter and let it run and complete and youll be back to stock. you have to reroot your phone too, so id just update to the ota 2.6 and then root that, then intall your atrix bootstrap and then the bionic recovery from rom manager. then your ready to flash some roms again.
rob219 said:
yes, this is made for windows computers and will work. uzip it and run the returntostoxk.bat file it will confirm your phone is connected (you have to be in fastboot mode) and after that just press enter and let it run and complete and youll be back to stock. you have to reroot your phone too, so id just update to the ota 2.6 and then root that, then intall your atrix bootstrap and then the bionic recovery from rom manager. then your ready to flash some roms again.
Click to expand...
Click to collapse
I use rsd on my wifes computer because she has windows 7. My computer has vista so try this out next time i go back to stock.
Sent from my MB865 using xda premium
Thanks for the link. I just acquired an ATRIX 2 and cannot upgrade to 2.3.6. It says update failed and read returning to factory helps. Crossing my fingers.
iFalcon said:
Thanks for the link. I just acquired an ATRIX 2 and cannot upgrade to 2.3.6. It says update failed and read returning to factory helps. Crossing my fingers.
Click to expand...
Click to collapse
Dont delete any bloatware and you should be fine with updating to 2.3.6.
Sent from my MB865 using xda premium
tmease1 said:
Dont delete any bloatware and you should be fine with updating to 2.3.6.
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
That was my only guess. I bought it mint from ebay. I'm hoping that is the issue with a bloatwsre getting removed.
Well...so good news and bad news.
This was phone I had purchased from Ebay. I works great. The problem I started with it receiving an update for 2.3.6, but it failed when attempting to update. From what I have read, this could be related bloated getting deleted.
I first attempted to find InlineFlashing_edison_5.5.175.16_cfc_p3_APBP_CID28 5.zip, but wasn't able to find a working link.
I was pointed to using a .bat file by Rob in this thread. Thanks a bunch Rob. All went well; however, when attempting to perfrom the update to 2.3.6 it now gives me an out of system memory error. It doesn't even start to download the update...odd. It then ask me to factory reset. however, the factory reset then takes me back into a fastboot mode.
Any ideas of next steps? Do I need to attempt finding the original InlineFlashing file? If so, any idea where to find it?
Thanks everyone! I appreciate the help.
here you go.
this is one i posted last week. here is the link to the thread. http://forum.xda-developers.com/showthread.php?t=1608879
here is a direct link to the file i uploaded, if it does not work let me know and i will re-upload it.
keep in mind that this is what you need to come FROM 2.3.6 back to stock 2.3.5
http://dl.dropbox.com/u/57012903/Inl...PBP_CID285.zip
Matt
matt99017d said:
here you go.
this is one i posted last week. here is the link to the thread. http://forum.xda-developers.com/showthread.php?t=1608879
here is a direct link to the file i uploaded, if it does not work let me know and i will re-upload it.
keep in mind that this is what you need to come FROM 2.3.6 back to stock 2.3.5
http://dl.dropbox.com/u/57012903/Inl...PBP_CID285.zip
Matt
Click to expand...
Click to collapse
Hi Matt -
Would this work if I'm already on 2.3.5 and need to restore back to default or MUST I be on 2.3.6 first? I can't get to 2.3.6 right now due to a failed update.
for that, im not sure. im under the impression that it's fine.
at this point its better that what you got. {i think}
let me search around a little bit and see if i can get a better answer
matt99017d said:
for that, im not sure. im under the impression that it's fine.
at this point its better that what you got. {i think}
let me search around a little bit and see if i can get a better answer
Click to expand...
Click to collapse
Thanks so much. This is a great community and appreciate everyones input!
Here you are. Just EXTRACT and point RSD LITE to the XML file inside the extracted folder. Happy flashing
MD5 = 2c25abaee9342f37e91d3318d64e2557
http://jumbofiles.com/az0dpni27pfi
http://netload.in/datei9n4tMznje4/InlineFlashing_edison_5.5.175.16_cfc_p3_APBP_CID285.xml.zip.htm
http://depositfiles.com/files/gu6lqptbd
Related
Looking for the stock AT&T update.zip file. I did search, but now luck. Thanks.
http://forum.xda-developers.com/showthread.php?t=731989
I just need the update.zip file. Thanks anyway.
No problem. That was the closest thing I could find. Best of luck with whatever you are doing.
Are you talking about the update.zip file to root your device? I have that.
No, the stock update.zip file. I am running stock and tried to run the restore and it said the file is missing. I was going to put it back on and try and run it again. I've been having trouble powering on. I can only power on if I have it plugged up.
AT&T is sending me a new phone, but I just wanted to try and restore it for giggles and also to make sure my data is gone.
??
there isnt a stock update.zip........
The phone says that update.zip cannot be found on the sd card when I try to restore. I'm running stock on it. It may be that its just fried. Once it boots up it seems to run ok. I just got the new one from AT&T and going to send the old one in in the morn. Just wanted to try one last fix because everything worked great the past few days, even the gps was working better. I guess I will see how the new one does.
sclRanger said:
The phone says that update.zip cannot be found on the sd card when I try to restore. I'm running stock on it. It may be that its just fried. Once it boots up it seems to run ok. I just got the new one from AT&T and going to send the old one in in the morn. Just wanted to try one last fix because everything worked great the past few days, even the gps was working better. I guess I will see how the new one does.
Click to expand...
Click to collapse
i dont think anyone here has any idea what you are talking about.
the stock phone doesnt have an update.zip on it. reinstall packages in system recovery doesnt mean it reinstalls stuff you removed from the OS. it allows you to flash zip files created for things like clockwork mod recovery and rooting on the 2.1....
sclRanger said:
The phone says that update.zip cannot be found on the sd card when I try to restore. I'm running stock on it. It may be that its just fried. Once it boots up it seems to run ok. I just got the new one from AT&T and going to send the old one in in the morn. Just wanted to try one last fix because everything worked great the past few days, even the gps was working better. I guess I will see how the new one does.
Click to expand...
Click to collapse
There is no update.zip for stock firmware. Reinstall package in recovery mode is for flashing ROM updates and other stuff. If you delete something from stock ROM or messed up, there is no way to get it back or restore other than flash the stock ROM via ODIN3 and load stock firmware file.
Actuallu dg posted one... Unfort I dont have the link
Sent from my SAMSUNG-SGH-I897 using XDA App
avgjoegeek said:
Actuallu dg posted one... Unfort I dont have the link
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
DG posted OneClick ODIN flash to stock. It is not an update.zip OP would like to have.
foxbat121 said:
DG posted OneClick ODIN flash to stock. It is not an update.zip OP would like to have.
Click to expand...
Click to collapse
....... No the .zip like the OP was requesting... If my sig shows up you can find it in the link
Sent from my SAMSUNG-SGH-I897 using XDA App
avgjoegeek said:
....... No the .zip like the OP was requesting... If my sig shows up you can find it in the link
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
I think you're confused with the JH7 update.zip that DG releases. It is not a recovery package zip OP like to have. You have to install CWM in order to flash this zip file.
What the OP doesn't exist. For the Captivate there are two options unless a developer creates another one:
1)Odin One click to I897UCJF6
2)ZIP of th I897UCJH7 firmware
/thread
I would advise you use the ODIN 1 Click to resolve any issue your having. I made a video on how to do this in my video archive thread...
http://forum.xda-developers.com/showthread.php?t=877652
I am trying to root my samsung infuse 4g and it is not allowing me to. I downloaded the superoneclick 1.9.1 shortfuse, turned usb debugging on, plugged the device in but everytime when i press root it goes to the waiting for device and then it says program not responding. I need to know if i have all the files and or programs to get this done. Its supposed to be easy, but its not working out for me. HELP HELP HELP ME PLEASE!!
DaYoung1 said:
I am trying to root my samsung infuse 4g and it is not allowing me to. I downloaded the superoneclick 1.9.1 shortfuse, turned usb debugging on, plugged the device in but everytime when i press root it goes to the waiting for device and then it says program not responding. I need to know if i have all the files and or programs to get this done. Its supposed to be easy, but its not working out for me. HELP HELP HELP ME PLEASE!!
Click to expand...
Click to collapse
Did you install the drivers?
DaYoung1 said:
I am trying to root my samsung infuse 4g and it is not allowing me to. I downloaded the superoneclick 1.9.1 shortfuse, turned usb debugging on, plugged the device in but everytime when i press root it goes to the waiting for device and then it says program not responding. I need to know if i have all the files and or programs to get this done. Its supposed to be easy, but its not working out for me. HELP HELP HELP ME PLEASE!!
Click to expand...
Click to collapse
You probably dont have drivers installed. They are included with samsungs media companion- kies. Search "kies" on google. Shouldnt be hard to find.
When I plug in my usb cable I see a kies upgrade for my firmware. Should I upgrade to that and will that fix the problem maybe
Sent from my PC36100 using XDA App
Samsung drivers
It's a update nada upgrade sorry for typo
Sent from my PC36100 using XDA App
Can I download this directly to my phone or does it have to be from my laptop
Sent from my PC36100 using XDA App
DaYoung1 said:
Can I download this directly to my phone or does it have to be from my laptop
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
download the drivers to your computer and install them
Ok I'm away from it now but I will. But what is the kies firmware update when you plug it up to the computer? Its on the top.
Sent from my PC36100 using XDA App
DaYoung1 said:
Ok I'm away from it now but I will. But what is the kies firmware update when you plug it up to the computer? Its on the top.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
kill kies, you dont want it running. having kies install the drivers. kies is a firmware update tool for updates att wont push over the air
Late to the party. Root 'stalls' @ Step 7
Hey,
So I installed the drivers, disable virus scan & run Superoneclick2.2 and it Goes through several steps Killing..Starting...Waiting...etc... through Step 7, then it goes non-responsive.
I have done this dance three times with superoneclick & twice with InfuseRootUnlock_v4. Can anyone point me in the right direction?
So I am un-rooted. Stock Froyo. - Thanks!
Why dont you save the headache and Odin flash a pre rooted stock rom?? theres gtgx thread and h8rift among more many options....
Sent from my SAMSUNG-SGH-I997 using XDA App
koriotto said:
Why dont you save the headache and Odin flash a pre rooted stock rom?? theres gtgx thread and h8rift among more many options....
Sent from my SAMSUNG-SGH-I997 using XDA App
Click to expand...
Click to collapse
I basically want to root just to open the possibility of flashing a GB Rom, but just wanted to perform this step prior to flashing anything.
This is my first Android. Was on EnergyROMs in the WM 6.5 arena.
KevinAlbrecht said:
Hey,
So I installed the drivers, disable virus scan & run Superoneclick2.2 and it Goes through several steps Killing..Starting...Waiting...etc... through Step 7, then it goes non-responsive.
I have done this dance three times with superoneclick & twice with InfuseRootUnlock_v4. Can anyone point me in the right direction?
So I am un-rooted. Stock Froyo. - Thanks!
Click to expand...
Click to collapse
I had the same issue, i tried with older version superoneclick1.X, it worked fine.
so use the older version.
KevinAlbrecht said:
I basically want to root just to open the possibility of flashing a GB Rom, but just wanted to perform this step prior to flashing anything.
This is my first Android. Was on EnergyROMs in the WM 6.5 arena.
Click to expand...
Click to collapse
Hahaa nice i was same place as you where... I had Fuze and then Touch pro2 running energy roms... Well man you could try an older version of super obe click but.. The new one never gave me trouble.
And if as you say, you want to root to possibly flash a GB ron later the possibukity of Odin flashing a pre rooted Rom its still a good choice if super one click keeps giving you trouble, it will basicly leave your stuff like pics music etc intact and flash a rom with root included ill add you a few thread links when i get to my pc.
Sent from my SAMSUNG-SGH-I997 using XDA App
koriotto said:
Hahaa nice ....
And if as you say, you want to root to possibly flash a GB ron later the possibukity of Odin flashing a pre rooted Rom its still a good choice if super one click keeps giving you trouble, it will basicly leave your stuff like pics music etc intact and flash a rom with root included ill add you a few thread links when i get to my pc....
Click to expand...
Click to collapse
Thanks koriotto. Very much appreceated. Not sure why I am having the issues. As I said, it is not just superoneclick giving me grief, but I tried a root & unlock_v4 as well.
ok as i said here are some threads for Stock PRE-rooted using odin, install drivers simply by installing samsung kies
http://forum.xda-developers.com/showthread.php?t=1116251&highlight=stock
or
http://forum.xda-developers.com/showthread.php?t=1092021&highlight=stock
If you are on Rogers:
http://forum.xda-developers.com/showthread.php?t=1326143&highlight=stock
atrix4nag said:
I had the same issue, i tried with older version superoneclick1.X, it worked fine.
so use the older version.
Click to expand...
Click to collapse
1.9x worked for me also, but there were allot of errors, that I had to click through. Donation made!
---------- Post added at 07:20 PM ---------- Previous post was at 07:15 PM ----------
koriotto said:
...ill add you a few thread links when i get to my pc.
Click to expand...
Click to collapse
Thanks for the links koriotto. I went with an earlier 1.9x superoneclick for now, but I will get thos links bookmarked!
I do have a question tho. Your links are for ultimate unbrick, right? So basically that is a staock rom for users to flash back to if they go too far down the rabbit hole?
- Thanks, Kevin
It works fine if you don't use zergrush as the exploit.
Zergrush kept hanging for me with latest superoneclick version.
Switched exploit to psneuter and it worked fine
I have a Samsung S2 Galaxy Skyrocket (SGH-I727) on the AT&T network. I set my phone into download mode, opened Odin3 v.1.85 and selected the .tar file I downloaded off this forum to root the device. Well after about 30 mins of Odin being stuck with the "<ID:0/009> SetupConnection.." prompt I figured it froze up or something. Well I restarted everything and and now my phone just goes straight into Odin mode with the error "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." I'm trying to reload the .tar and it is still doing the same thing...
I'm a complete noob at this! Will someone please help me out with really simple detailed instructions on how I can get my phone working again? I will do anything in return!!!!
1st poster in distress! Shoot me an message with your email and I'll walk you through what to do or if you have ever used Skype on your pc I can assist.
Sent from my SAMSUNG-SGH-I727 using xda premium
androidsc said:
1st poster in distress! Shoot me an message with your email and I'll walk you through what to do or if you have ever used Skype on your pc I can assist.
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
SENT! Thank you!!!!!!!!!!!
Samthereptileguy said:
I have a Samsung S2 Galaxy Skyrocket (SGH-I727) on the AT&T network. I set my phone into download mode, opened Odin3 v.1.85 and selected the .tar file I downloaded off this forum to root the device. Well after about 30 mins of Odin being stuck with the "<ID:0/009> SetupConnection.." prompt I figured it froze up or something. Well I restarted everything and and now my phone just goes straight into Odin mode with the error "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." I'm trying to reload the .tar and it is still doing the same thing...
I'm a complete noob at this! Will someone please help me out with really simple detailed instructions on how I can get my phone working again? I will do anything in return!!!!
Click to expand...
Click to collapse
Anything? Lol
xcrazydx said:
Anything? Lol
Click to expand...
Click to collapse
My entire life is on this phone... I will give anything (almost...) for help in getting it working today.
Lol, don't worry, i've got a nice long guide coming to help ya. LOL. Ok i think that's as far as i'm going with that joke
androidsc said:
Lol, don't worry, i've got a nice long guide coming to help ya. LOL. Ok i think that's as far as i'm going with that joke
Click to expand...
Click to collapse
LoL
Samthereptileguy said:
My entire life is on this phone... I will give anything (almost...) for help in getting it working today.
Click to expand...
Click to collapse
Ok, if he can't get it going for ya, I'll help.
Remember, make sure repartition IS NOT checked!!!!!!
xcrazydx said:
Ok, if he can't get it going for ya, I'll help.
Remember, make sure repartition IS NOT checked!!!!!!
Click to expand...
Click to collapse
Thank you xcrazydx, I can use all the help I can get right now!
Samthereptileguy said:
Thank you xcrazydx, I can use all the help I can get right now!
Click to expand...
Click to collapse
Just so you know, reflashing it will work. Sometimes it takes a few tries. Just make sure repartition is not checked, only reboot. click pda and select the CWM tar. Just make sure the device is recognized in the com port before you push start.
xcrazydx said:
Ok, if he can't get it going for ya, I'll help.
Remember, make sure repartition IS NOT checked!!!!!!
Click to expand...
Click to collapse
Just sent a nice long guide, and yes I included those words although not as red and large.
androidsc said:
Just sent a nice long guide, and yes I included those words although not as red and large.
Click to expand...
Click to collapse
Cool, thanks for helping!
Use odin and flash the sammobile image it will wipe everything but should fix the issue
CM9 Skyrocket
Sometimes its as simple as rebooting your computer, open Odin as admin, select your tar under PDA, connect your phone, make sure com is lit up and flash. My windows machine gets freaky like that sometimes and just fails or sits there doing nothing. Driver issue I assume even though they are there. I've encountered that error a few times trying to flash in Odin. No worries. These guys will get you back up. Good luck!
Sent from my SAMSUNG-SGH-I727 using xda premium
androidsc said:
Just sent a nice long guide, and yes I included those words although not as red and large.
Click to expand...
Click to collapse
Got it! Working on downloading the .tar file from sammobile right now.
You mentioned different versions of the OS like ICS and 4.0... Which one do I want? LOL and where do I get it? I'm assuming its different than the firmware correct?
Samthereptileguy said:
Got it! Working on downloading the .tar file from sammobile right now.
You mentioned different versions of the OS like ICS and 4.0... Which one do I want? LOL and where do I get it? I'm assuming its different than the firmware correct?
Click to expand...
Click to collapse
Thats a personal choice. Currently there are many different roms floating around but it depends on what you want.
Deciding on which to get is a matter of 2 simple questions for me: Do you want to be up to date, since ICS is the new hottest, thing (sexier UI IMO, some app issues, but overall feel wise. it makes the phone feel so much better, and fits the sleek profile, but lets not have me go on about aesthetics lol.
Or do you want functionatilty, extra options, overclocking (changing clock speeds) and things like that, currently we can only do that on 2.3.5/6 (Gingerbread, also known as GB)
I personally like ICS. Sometimes the Skyrocket just has to be sexy than the powerhouse e-beast that it is. That will happen whenever the Official ICS comes out
Samthereptileguy said:
Got it! Working on downloading the .tar file from sammobile right now.
You mentioned different versions of the OS like ICS and 4.0... Which one do I want? LOL and where do I get it? I'm assuming its different than the firmware correct?
Click to expand...
Click to collapse
You don't need the sammobile tar unless you're returning to stock. If you wanna just be stock rooted, flash CWM in odin. Make a nandroid backup. Then put the superuser zip on the sd card and flash it in CWM.
If you wanna run a custom rom from our dev section, just flash CWM, make a backup and then flash the rom which will already be rooted
xcrazydx said:
You don't need the sammobile tar unless you're returning to stock. If you wanna just be stock rooted, flash CWM in odin. Make a nandroid backup. Then put the superuser zip on the sd card and flash it in CWM.
If you wanna run a custom rom from our dev section, just flash CWM, make a backup and then flash the rom which will already be rooted
Click to expand...
Click to collapse
I just wanted to make sure that I got him back on the upgrade path to ics if he wants and the tar file saved me so I can verify it personally. Don't want to trip his counter.
Sent from my SAMSUNG-SGH-I727 using xda premium
androidsc said:
I just wanted to make sure that I got him back on the upgrade path to ics if he wants and the tar file saved me so I can verify it personally. Don't want to trip his counter.
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
Yeah I know the sammobile tar works, I found it a while ago and have been telling people to use it.
If your entire life is on it, I'd take the time to backup your important files, so you don't lose them!
Sent from my SAMSUNG-SGH-I727 using XDA
Ok everyone the leak is here!
I have tested it all day and it works very well, very smooth.
Don't post here if you are having issues with this leak itself. If you have issues with the process then by all means post in here with the issue.
So this is a how to with all the files needed being posted in here as well.
1) FXZ back to full 100% stock 2.3.6, ONLY if you were ON GB to begin with!!! If you started on the ICS OTA, then do not attempt this, you will Brick!!!
2) Download the file below called Blur_Version.55.13.25.MB865.ATT.en.US.zip and copy it to the root of your SDcard (it does not matter how it gets there)
3) Boot into stock recovery (power off, then while the phone is off hold both the Vol up and Vol down button, right in the middle, then hold the power button until you see the boot menu, then highlight recovery with the Vol down button, and select with the Vol up button).
4) Get to the recovery menu (you should see an android with an exclamation point, at this point) by holding the Vol up and Vol down button, then the menu will pop up, select install from /sdcard, then select the Blur file from the root of your sdcard, and tell it to flash it. You will flash a new recovery and see a droid laying down with it's belly open and red exclamation point, this is normal, just hit both Vol up and Vol down again to get the menu and select to flash from sdcard again and choose the same Blur file as before.
5) Boot into ICS, and root using the zip below, you will connect the phone to your computer and use the root.bat (unzip this folder to your desktop) for windows and root.sh for linux/mac.
Files:
ICS OTA:
http://www.androidfilehost.com/main...man/Blur_Version.55.13.25.MB865.ATT.en.US.zip
MD5sum: 5bd615584406ba726ad7d49a225dd6f1
ICS root:
http://www.androidfilehost.com/main/Motorola_ATRIX_2_Developers/jimbridgman/A2_ICS_root.zip
MD5sum: 7cd5a0896a8be580b5a379dff408d0ad
Fxz back to 2.3.5 from ICS, ONLY USE THIS METOD:
http://forum.xda-developers.com/showthread.php?t=1805975
Please do not post anything in this thread but install issues. DO NOT ASK IF YOU SHOULD UN-ROOT OR IF YOU CAN STAY ROOTED, OR IF YOU DID THE FXZ YESTERDAY ARE YOU OK. Follow the instructions above, or don't if you don't you will NOT get support.
Note: I am not responsible if you bootloop. brick or wreck your phone, or if your girl leaves you cause you play with your phone too much because of this. You are doing this of your own free will!
You will most likely not be able to get the "real" OTA while on this leak, and since the BL is going to be the same, you may not be able to install the "real" OTA at all, so when it comes out you will need to give the devs time to make it work for anyone who installed this. Again no complaints about this either, your dev team will find a way to make it work. You just need to give us the time needed when it comes out if there are any issues.
Anyone have a link to the 2.3.5 fkz? All the links I've checked are down!
WOO! Awesome!
farshad525hou said:
Anyone have a link to the 2.3.5 fkz? All the links I've checked are down!
Click to expand...
Click to collapse
Here try this one:
http://sbf.droid-developers.org/edison/list.php
THANKS! Also should the OTA be bigger than 29mb? NEVER MIND
After install this ICS leak, can we come back to 2.3.6 using Atrix2Bootstrap?
Quick question.. If I fkz from 2.3.6 wont we get the "invalid CG version error"? There's a thread to fix that but it says it takes stock recovery away (which is needed to flash the OTA). How do i downgrade?
farshad525hou said:
Quick question.. If I fkz from 2.3.6 wont we get the "invalid CG version error"? There's a thread to fix that but it says it takes stock recovery away (which is needed to flash the OTA). How do i downgrade?
Click to expand...
Click to collapse
I FXZ'd from 2.3.6 to 2.3.5 so I don't know about such a problem.
Sent from my MB865 using xda app-developers app
@farshad525hou
This is what I used: http://forum.xda-developers.com/showpost.php?p=20389449&postcount=1
Towards the bottom of the post there is an addition step to those who are already on 2.3.6. Just copy the files over to the fkz file, then it should work.
sjc807 said:
@farshad525hou
This is what I used: http://forum.xda-developers.com/showpost.php?p=20389449&postcount=1
Towards the bottom of the post there is an addition step to those who are already on 2.3.6. Just copy the files over to the fkz file, then it should work.
Click to expand...
Click to collapse
THANK YOU!!!! Lo lI would thank you but, i've already hit my 8 thanks daily limit....
How do we get it on our phone if we are running stock 2.3.6? (Unrooted)
Sent from my MB865 using xda premium
question
Done:
Thank you so much Jim. You are the best.
Now if only I could get my Nexus 7 on Thursday , on my day off, I would have everything
Help me!
My MD5 is matched with 5bd615584406ba726ad7d49a225dd6f1
PhoenixNghi said:
Help me!
My MD5 is matched with 5bd615584406ba726ad7d49a225dd6f1
Click to expand...
Click to collapse
You are not 100% stock.... follow my directions, or it will not work... and don't install bootstrap, that is why your logwrap failed verification.
Sent from my SAMSUNG-SGH-I747 using xda premium
I can't wait till I get my phone back! ICS, FTW!!!!
283ish MB
Sent from my MB865 using xda app-developers app
Oooohhh....yeahhh baby,that's what I am talking about,got it :good::good: I wiped it and I did not come across any issues at all.
Thanks so much.
Wow...feel like a complete noob. I've used RSD Lite for my X2 plenty of times with SBF files. Don't know how to use this FXZ file though. Read other threads as well and dont know what to do with this 2.3.5 FXZ file? Been rooted on 2.3.6 for a month or so...still new to this device.
DX2Trip said:
Wow...feel like a complete noob. I've used RSD Lite for my X2 plenty of times with SBF files. Don't know how to use this FXZ file though. Read other threads as well and dont know what to do with this 2.3.5 FXZ file? Been rooted on 2.3.6 for a month or so...still new to this device.
Click to expand...
Click to collapse
Go here:
http://forum.xda-developers.com/showthread.php?t=1396650
There is a section on the fxz in the above noob thread, also look just a little lower there is also a patch zip file to apply to the fxz.
Sent from my SAMSUNG-SGH-I747 using xda premium
Dx, you can find very good instructions on how to flash the fxz in this thread: http://forum.xda-developers.com/showthread.php?t=1396650
Sent from my MB865 using xda premium
tried to root my Skyrocket, tried to put on latest cm10.1 nightly, got system 7 error, someone said to format. Did so, now it won't go past the samsung screen. Can someone help me fix my newb-ness?
Noobs have no business messing with nightlies.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
xcrazydx said:
Noobs have no business messing with nightlies.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
thanks for stoppin' by
lookslikescreech said:
thanks for stoppin' by
Click to expand...
Click to collapse
Np, enjoy the skyrocket!
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
lookslikescreech said:
tried to root my Skyrocket, tried to put on latest cm10.1 nightly, got system 7 error, someone said to format. Did so, now it won't go past the samsung screen. Can someone help me fix my newb-ness?
Click to expand...
Click to collapse
Start at the beginning. When you rooted your phone what ROM/build were you on? Stock? What Recovery are you running? Did you make a backup? In my experience, you usually get a system 7 error when the download is bad, (did you check the MD5?) or if you're trying to flash a ROM that doesn't match your current system (IE: trying to flash a JB ROM when you're currently on ICS.)
The more info we have, the better we can help you.
Fall of Enosis said:
Start at the beginning. When you rooted your phone what ROM/build were you on? Stock? What Recovery are you running? Did you make a backup? In my experience, you usually get a system 7 error when the download is bad, (did you check the MD5?) or if you're trying to flash a ROM that doesn't match your current system (IE: trying to flash a JB ROM when you're currently on ICS.)
The more info we have, the better we can help you.
Click to expand...
Click to collapse
Uh status 7 is assert protection so its a mismatch usually in device info typically model numbers, and has nothing to do with bad downloads.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Fall of Enosis said:
Start at the beginning. When you rooted your phone what ROM/build were you on? Stock? What Recovery are you running? Did you make a backup? In my experience, you usually get a system 7 error when the download is bad, (did you check the MD5?) or if you're trying to flash a ROM that doesn't match your current system (IE: trying to flash a JB ROM when you're currently on ICS.)
The more info we have, the better we can help you.
Click to expand...
Click to collapse
Thanks for helping
I had a stock rom on it and found a youtube video referencing the how to guide in this forum, walked everything through step by step but didn't do the twrp thing, only odin . Tried it, didn't work. Didn't checkthe MD5 as it wasnt referenced in the video (have since seen it in the thread).
I'm gonna try and flash a stock rom with odin if I can and start over and ignore the youtube video.
At the moment Odin is the only program on my computer that talks to my phone so I'm hoping that works, just gotta find how to do it...
lookslikescreech said:
Thanks for helping
I had a stock rom on it and found a youtube video referencing the how to guide in this forum, walked everything through step by step but didn't do the twrp thing, only odin . Tried it, didn't work. Didn't checkthe MD5 as it wasnt referenced in the video (have since seen it in the thread).
I'm gonna try and flash a stock rom with odin if I can and start over and ignore the youtube video.
At the moment Odin is the only program on my computer that talks to my phone so I'm hoping that works, just gotta find how to do it...
Click to expand...
Click to collapse
Yeah, stay stock until you have a clue on what you're doing.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
lookslikescreech said:
Thanks for helping
I had a stock rom on it and found a youtube video referencing the how to guide in this forum, walked everything through step by step but didn't do the twrp thing, only odin . Tried it, didn't work. Didn't checkthe MD5 as it wasnt referenced in the video (have since seen it in the thread).
I'm gonna try and flash a stock rom with odin if I can and start over and ignore the youtube video.
At the moment Odin is the only program on my computer that talks to my phone so I'm hoping that works, just gotta find how to do it...
Click to expand...
Click to collapse
In this section (q&a), read through "the ultimate newb guide" by vincom.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
btm fdr said:
In this section (q&a), read through "the ultimate newb guide" by vincom.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
thanks, on it now. Just need to get it back to stock with Odin then I'll try again when I understand what I'm doing more.
Anyone feeling charitable and want to tell me how to flash the stock rom with Odin? I'd appreciate it.
lookslikescreech said:
thanks, on it now. Just need to get it back to stock with Odin then I'll try again when I understand what I'm doing more.
Anyone feeling charitable and want to tell me how to flash the stock rom with Odin? I'd appreciate it.
Click to expand...
Click to collapse
It's in the guide bro
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Best of luck mate, reply here if you have any issues. And for pete's sake, next time, instead of watching a YouTube video, read read read and re-read the forums. Once that's done, read them again. Only then, start flashing.
Fall of Enosis said:
Best of luck mate, reply here if you have any issues. And for pete's sake, next time, instead of watching a YouTube video, read read read and re-read the forums. Once that's done, read them again. Only then, start flashing.
Click to expand...
Click to collapse
hahaha thanks
Now it says "firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." Far out, I can't win tonight!
lookslikescreech said:
hahaha thanks
Now it says "firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." Far out, I can't win tonight!
Click to expand...
Click to collapse
Bro, you're going to end up with a paperweight. That guide is step by step. Read it, read it again.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
lookslikescreech said:
hahaha thanks
Now it says "firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." Far out, I can't win tonight!
Click to expand...
Click to collapse
That's an alternate form of DL mode. Odin a stock ROM from that screen. Read the Noobs Guide. Odin is finicky so pay attention to the guide. Then read it again. Once you've read and comprehend it all spin in a circle saying "I deserve this" three times and Odin will grant your wish. lol
hechoen said:
That's an alternate form of DL mode. Odin a stock ROM from that screen. Read the Noobs Guide. Odin is finicky so pay attention to the guide. Then read it again. Once you've read and comprehend it all spin in a circle saying "I deserve this" three times and Odin will grant your wish. lol
Click to expand...
Click to collapse
hahaha thanks
Got it working, used TWRP to flash the latest RC CM 10.1
Got it all going now after a minor heart attack and a few more grey hairs. Just gotta figure out why the wifi isn't working at all now. Can't get it to turn on.
Your original 'system error 7' problem was most likely caused by trying to flash a newer ROM with an older version of CWM or TWRP. Glad you got the phone up, can't help you with the wifi problem, sorry. Although, what modem did you flash, if any? System Settings -> About phone -> Baseband version?
Tom
rpr69 said:
Your original 'system error 7' problem was most likely caused by trying to flash a newer ROM with an older version of CWM or TWRP. Glad you got the phone up, can't help you with the wifi problem, sorry. Although, what modem did you flash, if any? System Settings -> About phone -> Baseband version?
Tom
Click to expand...
Click to collapse
I flashed the UXUMA7 radio, didnt really do much, it worked before.
Still can't figure out the Wifi though :-/ just straight up won't turn on.
If you are on a newer CM 10.1 , the only supported radio is UCMC1, UXUMA7 is really old. That may be why wifi is not working.
UXUMA7 and UCMC1 are very similar. First one is the Rogers and second is att's release which is usually late by a month or so after rogers. Bottom line both will work.
Have your radiofile.zip, cm10.1.zip, and gapps from 20130301 all on your SD card.
Do you have a back up, nandroid? If not do it now.
Go to recovery and Clean up well:
Go to mounts and format data, system, cach twice or three times. Go to advanced and clean dalvik cache. Don't reboot
Now installing in this order:
- radio
-cm10.1
-gapps
Now reboot your phone.
Wait until it is finished and leave it untouched for 10 minutes to settle down and do its thing.
Then turn it off back on and enjoy.
Your noob status will start to fade if you do a clean install :thumbup:
Sent from my SAMSUNG-SGH-I727 using xda app-developers app