I was on CM10 initially, and flashed Galaxy Rom HD over it, hoping it would flash over it, but it froze during the flash, so I rebooted into download mode, and flashed the stock ICS thru Odin and Odin says it was success. now im currently stuck in the glowing "Samsung" logo... SOMEONE PLEASE HELP :C
Flash clockwork recovery and do a factory reset, then reflash
Sent from my myTouch 4g via Tapatalk
Odin is doing factory reset + complete format of internal card before flashing stock roms. I had that to, i was waiting 15 mins at boot logo, i just restarted into 3e recovery did some wipes (not sure which one) and i just rebooted, was working after that
Sent from my GT-P6200 using xda app-developers app
Related
hey guys I tried looking into the forums and tried to google but I'm having a hard time entering CWM. I rooted my phone today successfully right away I installed cwm recovery and did a nandroid. I tried to install beastmode 4.0 and I flashed the .zip file for the conversion. I rebooted my phone and now im stuck in a blue samsung screen. it's been like this for an hour. I came from an evo 4g and I cant seem to get into recovery. Ive tried pressing up and down volume key and power at the same time and letting go of the power switch when the screen flickered but no go. Is there something i'm doing wrong?
p.s Im really sorry to be asking this but I just bought the phone and I hope I didnt brick my phone
There is always the watt to flash back to stock using Odin Samsung phones are very hard to brick
Sent from my SGH-I727 using XDA Premium App
Go here do this http://forum.xda-developers.com/showthread.php?t=1342348. Complete guide to use odin for flashig the stock tar. And then re root and boot into cwm recovery and flash data, and cache 3 times each before flashing your rom....
I tried to install a new kernel on my phone, but it went south and started bootlooping. I flashed to stock with Odin, but it still bootlooped. I flashed the stock kernel, and guess what? Still bootlooping.
What can I do? I don't think it's bricked, since I can still access recovery, but I can't think of where to go from here.
Wipe cache, wipe dalvik cache, flash kernel. What kernel is it?
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
No recovery mode
Hey,
I tried upgrading to ICS (4.0.4- official Rogers) using Kies. that went poorly, and I soft bricked (bootloop). I tried putting the stock ROM back on and I still have the bootloop.
things to know:
No recovery mode - phone vibrates and reboots when you hold down power and vol up and down
When using odin phone screen stays on download mode screen until it reboots.
Would I need to use commands to factory reset the phone?
I had a problem as I was on REMICS 1.4 and then decided to try "aokp_galaxysl_milestone-6" so I put it on my Sdcard and make a reboot to recovery then wiped factory reset and then installed the new flash and at rebooting to install the second part "gapps-ics-20120429-signed", I got stuck there and had soft brick.
I want to know why this happened coz am planning also to try "InDROID EVOLUTION RC1" ROM, so what is am doing wrong when changing from one ROM to another,
and why I got this soft brick ?
Plus I can't find a file for CWM, to rebot at recovery and then chose it like I do in my s6102? OR I do this by odin or what ?
I used odin to flash I9003DDLF2_I9003ODDLF2_INU but didn't loops the loading at the logo samsung, also tried to get to a backup of remics and stuck at the start and never loads ....
Thanks a lot in advance
RemICS 1.4 is fine but...
same problem here, more or less. I can't install any other package on the gt-i9003 including stock like ddkp3. tried restocking from xxkpe but the boot logo looping is all i get. we need an intervention.
Use vol up+home+power button to boot to recovery. Then wipe data. Yes there is stock recovery.
Sent from my GT-I9003 using xda app-developers app
My 7.0 tablet (GT-P3113) rooted at CM10.2 turned off one day and booted in recovery. I tried system reboot but it went back into recovery. Wipe of Davilk Cache and Data caused a recovery reboot. I did a system wipe and a cache wipe and reinstalled CM10.2. I got to the boot animation and "Android Upgrading Apps"... but then I got a black screen and it rebooted and got stuck at the Samsung Galaxy Tab logo and recovery stopped working. Nand Full Wipe and a reparation with the P3110 pit file fails but flashing stock firmware from SamMobile passes but it's still stuck at the logo. I tried Heimdall but I get a "Claiming Interface Failed!" error. Please, I need help! :crying:
Use odin and flash rom and kernel
rod555 said:
Use odin and flash rom and kernel
Click to expand...
Click to collapse
I tried flashing stock from SamMobile (August 2012) and it said "PASS" but it was still stuck. I thought about the kernel but I couldn't find odin flashable kernel or a odin flashable bootloader (I had flashed a p3110 JB Bootloader from http://forum.xda-developers.com/showthread.php?t=2052290). Plus all the download links / mirrors at http://forum.xda-developers.com/showthread.php?t=1645295 are dead. Doing more research...
I just downloaded and flashed P3113UEBLG2_P3113XARBLG2_XAR from SamMobile and P3113UEBLG2-kernel.tar.md5 that I found and no luck. It still hangs on Samsung Galaxy Tab 2 7.0 logo.
Bump, does anyone have any suggestions? Should I replace the internal SD Card?
I would try reflashing in odin after it passes hold the power button for ten seconds then when the screen flickers unpress the power then hold the vol up and the power at the same time. If it goes to the stock recovery do a factory reset then reboot. It worked for me when I had to flash the original odin 4.0.3 when comming from 4.1.1
Sent from my SPH-D710VMUB using Tapatalk 4
sickysticky said:
I would try reflashing in odin after it passes hold the power button for ten seconds then when the screen flickers unpress the power then hold the vol up and the power at the same time. If it goes to the stock recovery do a factory reset then reboot. It worked for me when I had to flash the original odin 4.0.3 when comming from 4.1.1
Sent from my SPH-D710VMUB using Tapatalk 4
Click to expand...
Click to collapse
I've tried this. It stays at a black screen.
Dimensions said:
My 7.0 tablet (GT-P3113) rooted at CM10.2 turned off one day and booted in recovery. I tried system reboot but it went back into recovery. Wipe of Davilk Cache and Data caused a recovery reboot. I did a system wipe and a cache wipe and reinstalled CM10.2. I got to the boot animation and "Android Upgrading Apps"... but then I got a black screen and it rebooted and got stuck at the Samsung Galaxy Tab logo and recovery stopped working. Nand Full Wipe and a reparation with the P3110 pit file fails but flashing stock firmware from SamMobile passes but it's still stuck at the logo. I tried Heimdall but I get a "Claiming Interface Failed!" error. Please, I need help! :crying:
Click to expand...
Click to collapse
reflash the rom...
here's the link : http://samsung-updates.com/device/?id=GT-P3113
each version has the link to the whole odin flashable rom and the kernel for it, just select the version ur on and flash it then the kernel hope i help
taha_elfeituri said:
reflash the rom...
here's the link : http://samsung-updates.com/device/?id=GT-P3113
each version has the link to the whole odin flashable rom and the kernel for it, just select the version ur on and flash it then the kernel hope i help
Click to expand...
Click to collapse
Thank You, but I had this piece of information already. It came to no help, I was still having the same problem. I sent it back to Samsung.
Dimensions said:
Thank You, but I had this piece of information already. It came to no help, I was still having the same problem. I sent it back to Samsung.
Click to expand...
Click to collapse
did you flash the kernel??
Hey guys,
I recently rooted my Galaxy Tab 2 P3110 , then installed CWM, and then went on to install the Cyanogen Mod 10.1.3. Installation was succesful .I then used the tablet for about 5-6 hrs before i restarted it. Now the tablet is stuck showing the Cyanogen logo. I have waited for an hour and still nothing happened.
When i tried to enter the CWM recovery mode, i end up getting the ODIN screen or the stock recovery mode.
Any ideas as to how i can resolve this issue.
Thanks in advance
Does it bootloop or just stick at boot animation?
If it's stuck at animation you may be able to adb push recovery.
sent using logic and reason from a device forged of witchcraft.
tokenpoke said:
Does it bootloop or just stick at boot animation?
If it's stuck at animation you may be able to adb push recovery.
sent using logic and reason from a device forged of witchcraft.
Click to expand...
Click to collapse
It just stuck at animation.
I don't know the Windows process of an adb flash of recovery.
You can also try to flash it with odin
sent using logic and reason from a device forged of witchcraft.
tokenpoke said:
I don't know the Windows process of an adb flash of recovery.
You can also try to flash it with odin
sent using logic and reason from a device forged of witchcraft.
Click to expand...
Click to collapse
I tried the ODIN method. I first downloaded the stock rom and then used ODIN to flash it. It says Pass in the ODIN App but when the device reboots, i still get the cyanogen logo which goes on forever..!!
I had the same issue with being stuck at the cyanogenmod boot animation. I went back into recovery, did a wipe data/factory reset. Once I did that, I flashed the .zip file from my sdcard and it worked fine. As far as your installation of CWM, you must have not installed it correctly. I use Philz Touch Recovery for my P5113.