I'm a noob and I tried to install 3e recovery using the instructions and video supplied in this post http://forum.xda-developers.com/showthread.php?t=1105413
Everything seemed to work fine until I went into ROM manager and tried to backup current ROM (stock, rooted). I selected backup ROM and now my phone is sitting with the SAMSUNG logo and it hasn't moved from that in almost an hour. I'm not sure what to do to get the phone to boot up normally. I have done a battery pull but that didn't work. When I plug the phone into my computer, XP does recognize that is plugged in because it shows the internal and external sd cards in the My Computer window. I can't open either on by double clicking on the icon for each drive. I'm getting pretty desperate because I can't seem to figure out how to get the phone to boot normally. Any help and/or suggestions would be most helpful. Thanks!!!
Odin flash to stock in dev section
try a hard reset. you shouldnt pull batteries unless it is the last resort, linux needs to unmount the file system.
a hard reset(different from a factory reset) is accomplished by holding the vol up +vol dn + power at the same time untill the phone reboots. if you wait till the samsung screen pops up again and immediately release you may also enter 3e recovery mode.
try to just boot the phone into the ui first. if it is still ok, go into rom manager and "flash cwm recovery" choose captivate or i9000. reboot into 3e recovery(blue text), (select reboot recovery not backup) reinstall packages twice! you should now be at a green text cwm recovery. once you get it setup the backup link in rom manager should work.
if the phone fails to boot up after a hard reset, you can attemp to clear user data in 3e recovery. you can get to 3e with phone off(you may pull battery now if you need to) hold vol up+ vol dn + pwr and hold untill you see the "samsung" screen. then you can clear data/factory reset
if that doesn't help you can still use odin/heimdall to restore the phone with one of the roms that may already have modded 3e recovery and other nice features.
Thanks for all your help! I managed to get it back working using Odin. Now I'm on the Infused ROM and loving life. I'm going to save this post just in case I get into trouble again down the road.
Sent from my SAMSUNG-SGH-I997 using XDA App
Dani897 said:
try a hard reset. you shouldnt pull batteries unless it is the last resort, linux needs to unmount the file system.
a hard reset(different from a factory reset) is accomplished by holding the vol up +vol dn + power at the same time untill the phone reboots. if you wait till the samsung screen pops up again and immediately release you may also enter 3e recovery mode.
try to just boot the phone into the ui first. if it is still ok, go into rom manager and "flash cwm recovery" choose captivate or i9000. reboot into 3e recovery(blue text), (select reboot recovery not backup) reinstall packages twice! you should now be at a green text cwm recovery. once you get it setup the backup link in rom manager should work.
if the phone fails to boot up after a hard reset, you can attemp to clear user data in 3e recovery. you can get to 3e with phone off(you may pull battery now if you need to) hold vol up+ vol dn + pwr and hold untill you see the "samsung" screen. then you can clear data/factory reset
if that doesn't help you can still use odin/heimdall to restore the phone with one of the roms that may already have modded 3e recovery and other nice features.
Click to expand...
Click to collapse
hi dani, i got the same case. but mine cannot boot into CMW. my PC does not detect. any idea??
did you get this fix, I am having the same issue.
So u should use gtgs ultimate unbrick then follow this.
1: Root using super one click
2: Download 3e recovery save it to your SD card
3: Use root explorer to move the 3e recovery file to systim bin overwrite recovery file
4: Reboot phone
5: Download Rom manager and click flash clock work mod pic i9000 not the (mtd)
6: Once its done select reboot in recovery
7: In recovery click RE-INSTALL it should load then click re-install again and u should get green cwm then reboot and flash away
Sent from my SGH-I997 using XDA Premium App
LG_iiNsTiiNcT said:
So u should use gtgs ultimate unbrick then follow this.
1: Root using super one click
2: Download 3e recovery save it to your SD card
3: Use root explorer to move the 3e recovery file to systim bin overwrite recovery file
4: Reboot phone
5: Download Rom manager and click flash clock work mod pic i9000 not the (mtd)
6: Once its done select reboot in recovery
7: In recovery click RE-INSTALL it should load then click re-install again and u should get green cwm then reboot and flash away
Sent from my SGH-I997 using XDA Premium App
Click to expand...
Click to collapse
This is an old useless method... just Odin flash the community kernel v8... done..
Sent from my SGH-I997 using XDA App
I have had that same boot screen problem too, buy a jig and u can put it into download mode that way then when you use odin3 to restore stock, u can get the stock rom with the recovery in it for u and u just need to download the update.zip on rom manager and then go into recovery and run the update zip twice. http://forum.xda-developers.com/showthread.php?t=1092021
You should get a jig (http://www.ebay.com/sch/i.html?_nkw...dkw=jig&_osacat=0&_trksid=p3286.c0.m270.l1313) its a life saver in my opinion. because u can restore ur phone if u ever mess up.
I too am stuck at the Samsung logo. I've used Odin to revert to stock but I think the Stock I reverted to was AT&T rather than Rogers? I can't seem to find the Rogers stock. I've tried to get it into recovery mode, taking out the battery booting with power up and down, releasing power when the Samsung logo came up - no good, the logo stays. I'm at a loss? Any advice? Is the a full raft of pit / pda etc files for Odin that I can make the Rogers Infuse as it was day one?
Thanks for any help
I'm in the same boat... maybe it's because the rogers infuse comes as android 2.3? I hope a solution comes out soon!
Same here, Rogers Infuse. Stuck at Samsung logo. Tried infuse odin recovery, and community. Still no go. I tried flashing all the different stock/unbrick roms but nothing.
However, if I install Infused kernel/recovery, i can access the recovery and do a wipe/lagfix.
I was trying to flash to Infused and when I got to the step where the phone rebooted to CWM recovery it hang on the Samsung logo. After about 3 hours of trying various button resets the phone booted normally (ie not to CWM). They say the definition of insanity is trying the same thing over and over and expecting different results, well I went back through the same steps to flash to infused and again it froze on the Samsung logo, only I have no idea what I did last time to get it to boot normal, not to CWM. Since it did it before, there must be a combination...anybody know what it might be. I've read and tried everything on the forums. Thought I'd post here prior to using Odin. I am able to get to downloading screen by doing the button/USB cable combo.
I'm headed out of town and won't check this right away, but thanks for any posts with ideas.
xoltrix2000 said:
Same here, Rogers Infuse. Stuck at Samsung logo. Tried infuse odin recovery, and community. Still no go. I tried flashing all the different stock/unbrick roms but nothing.
However, if I install Infused kernel/recovery, i can access the recovery and do a wipe/lagfix.
Click to expand...
Click to collapse
Rogers Infuse users need to use the UXKG3 unbrick, not the UCKD5 or E3 unbricks.
The UXKG3 variant tends to fall to the second or third pages of the dev forum since it's far less commonly used.
Holy Crap - im hooped without my phone for work...!
reposting in new thread
Hi guys,
Here is the solution for this issue.
Just flash with this package that will totally reset your Infuse 4G to UCKJ4, do it with linux that worked for me.
Thanks to AdamOutler
Here is the post:
http://forum.xda-developers.com/showthread.php?t=1331381
After that just root, flash a new kernel and your Recovery Mode will resturs.
samsung infuse 4g rogers version stucked on samsung logo(rooted)
my samsung infuse 4g rogers version rooted with odin and with cynogen mod os running phone got strucked when changing the os to Infuse_4G_Remics-UX_v1.3.1.zip .it's showing only samsung logo and not booting to recovery screen when trying to get recovery ......anyone please help me regarding this problem.....it will be great help to me and most loving [email protected]
samsung infuse 4g (I997R) rogers version got stuck samsung logo
my samsung infuse 4g (I997R) got stuck samsung logo since 4 days...my phone was rooted by use of odin later i changed my os from 2.3.3 to cynogen os.later my baboon brain provoked me to change to Infuse_4G_Remics-UX_v1.3.1.zip .i was my mistake -my phone got stuck with samsung logo and not booting its my favorite phone ever i had...please let me know anyone how to solve the problem in this regard......it will be big big help to me....and i will thankful to them,,,,,,,,,,,,,my email id
[email protected]
rajeshvarma999 said:
my samsung infuse 4g rogers version rooted with odin and with cynogen mod os running phone got strucked when changing the os to Infuse_4G_Remics-UX_v1.3.1.zip .it's showing only samsung logo and not booting to recovery screen when trying to get recovery ......anyone please help me regarding this problem.....it will be great help to me and most loving [email protected]
Click to expand...
Click to collapse
Go here: http://forum.xda-developers.com/showthread.php?t=1326143
The few last posts have mirrors. You are gonna need the odin pack to flash back to stock and then work your way up.
You need to flash ICS before flashing JB.
Infuse 4G wont boot - no root, CWM, Passcode locked
Hi guys
I dont know where to start from. This Infuse 4G was dropped by the owner and we happened to come across it.
Checked the SIM card but that was already deactivated and there were no contacts on it.
Then we wanted to check the phonebook and find someone to contact, but the phone was passcode locked.
Then i went and flashed Odin_Community_Kernel_v8.zip since it was on GB, but it doesnt seem to be booting. I was planning on adb-ing into it when it was in recovery (CWM) so that i could delete the passcode and find a way to get in touch with the owner.
Now am stuck at the Samsung logo...:crying:
hey guys I tried looking into the forums and tried to google but I'm having a hard time entering CWM. I rooted my phone today successfully right away I installed cwm recovery and did a nandroid. I tried to install beastmode 4.0 and I flashed the .zip file for the conversion. I rebooted my phone and now im stuck in a blue samsung screen. it's been like this for an hour. I came from an evo 4g and I cant seem to get into recovery. Ive tried pressing up and down volume key and power at the same time and letting go of the power switch when the screen flickered but no go. Is there something i'm doing wrong?
p.s Im really sorry to be asking this but I just bought the phone and I hope I didnt brick my phone
There is always the watt to flash back to stock using Odin Samsung phones are very hard to brick
Sent from my SGH-I727 using XDA Premium App
Go here do this http://forum.xda-developers.com/showthread.php?t=1342348. Complete guide to use odin for flashig the stock tar. And then re root and boot into cwm recovery and flash data, and cache 3 times each before flashing your rom....
I was on CM10 initially, and flashed Galaxy Rom HD over it, hoping it would flash over it, but it froze during the flash, so I rebooted into download mode, and flashed the stock ICS thru Odin and Odin says it was success. now im currently stuck in the glowing "Samsung" logo... SOMEONE PLEASE HELP :C
Flash clockwork recovery and do a factory reset, then reflash
Sent from my myTouch 4g via Tapatalk
Odin is doing factory reset + complete format of internal card before flashing stock roms. I had that to, i was waiting 15 mins at boot logo, i just restarted into 3e recovery did some wipes (not sure which one) and i just rebooted, was working after that
Sent from my GT-P6200 using xda app-developers app
My 7.0 tablet (GT-P3113) rooted at CM10.2 turned off one day and booted in recovery. I tried system reboot but it went back into recovery. Wipe of Davilk Cache and Data caused a recovery reboot. I did a system wipe and a cache wipe and reinstalled CM10.2. I got to the boot animation and "Android Upgrading Apps"... but then I got a black screen and it rebooted and got stuck at the Samsung Galaxy Tab logo and recovery stopped working. Nand Full Wipe and a reparation with the P3110 pit file fails but flashing stock firmware from SamMobile passes but it's still stuck at the logo. I tried Heimdall but I get a "Claiming Interface Failed!" error. Please, I need help! :crying:
Use odin and flash rom and kernel
rod555 said:
Use odin and flash rom and kernel
Click to expand...
Click to collapse
I tried flashing stock from SamMobile (August 2012) and it said "PASS" but it was still stuck. I thought about the kernel but I couldn't find odin flashable kernel or a odin flashable bootloader (I had flashed a p3110 JB Bootloader from http://forum.xda-developers.com/showthread.php?t=2052290). Plus all the download links / mirrors at http://forum.xda-developers.com/showthread.php?t=1645295 are dead. Doing more research...
I just downloaded and flashed P3113UEBLG2_P3113XARBLG2_XAR from SamMobile and P3113UEBLG2-kernel.tar.md5 that I found and no luck. It still hangs on Samsung Galaxy Tab 2 7.0 logo.
Bump, does anyone have any suggestions? Should I replace the internal SD Card?
I would try reflashing in odin after it passes hold the power button for ten seconds then when the screen flickers unpress the power then hold the vol up and the power at the same time. If it goes to the stock recovery do a factory reset then reboot. It worked for me when I had to flash the original odin 4.0.3 when comming from 4.1.1
Sent from my SPH-D710VMUB using Tapatalk 4
sickysticky said:
I would try reflashing in odin after it passes hold the power button for ten seconds then when the screen flickers unpress the power then hold the vol up and the power at the same time. If it goes to the stock recovery do a factory reset then reboot. It worked for me when I had to flash the original odin 4.0.3 when comming from 4.1.1
Sent from my SPH-D710VMUB using Tapatalk 4
Click to expand...
Click to collapse
I've tried this. It stays at a black screen.
Dimensions said:
My 7.0 tablet (GT-P3113) rooted at CM10.2 turned off one day and booted in recovery. I tried system reboot but it went back into recovery. Wipe of Davilk Cache and Data caused a recovery reboot. I did a system wipe and a cache wipe and reinstalled CM10.2. I got to the boot animation and "Android Upgrading Apps"... but then I got a black screen and it rebooted and got stuck at the Samsung Galaxy Tab logo and recovery stopped working. Nand Full Wipe and a reparation with the P3110 pit file fails but flashing stock firmware from SamMobile passes but it's still stuck at the logo. I tried Heimdall but I get a "Claiming Interface Failed!" error. Please, I need help! :crying:
Click to expand...
Click to collapse
reflash the rom...
here's the link : http://samsung-updates.com/device/?id=GT-P3113
each version has the link to the whole odin flashable rom and the kernel for it, just select the version ur on and flash it then the kernel hope i help
taha_elfeituri said:
reflash the rom...
here's the link : http://samsung-updates.com/device/?id=GT-P3113
each version has the link to the whole odin flashable rom and the kernel for it, just select the version ur on and flash it then the kernel hope i help
Click to expand...
Click to collapse
Thank You, but I had this piece of information already. It came to no help, I was still having the same problem. I sent it back to Samsung.
Dimensions said:
Thank You, but I had this piece of information already. It came to no help, I was still having the same problem. I sent it back to Samsung.
Click to expand...
Click to collapse
did you flash the kernel??
After I installed any custom I reseted my phone from Setting>Privacy, but it restarted and didn't reset
So I put my phone to recovery mode and did wipe data/cache
After this my phone stuck on LG logo. I tried the bootloop breaker, but I don't want to use it everytime I reset my phone.
Is there any sollutions to this problems?
(sorry for my bad grammar :|
nmka0601 said:
After I installed any custom I reseted my phone from Setting>Privacy, but it restarted and didn't reset
So I put my phone to recovery mode and did wipe data/cache
After this my phone stuck on LG logo. I tried the bootloop breaker, but I don't want to use it everytime I reset my phone.
Is there any sollutions to this problems?
(sorry for my bad grammar :|
Click to expand...
Click to collapse
Install Last Wpark Bootloader 1.25a And Recovery Here Is A Simple Tool v2.0 To Flash Them Easily Download http://d-h.st/1Ir
AHHHH
ok, so I back to stock ROM and rooted. Installed wpark bootloader then tmwp recovery
After that Installed jellycream v3
so i hit on settings>reset phone, and it stuck on recovery mode AGAIN. Yeah I used that universal_recoveryloop_breaker.zip, but it have the bug too. Everytime I use it it kind a deletes my recovery. Why I'm thinking this is because after I starts up my phone using that loop breacker I can't even reset my phone. It just restarts and thats all....
AAAAAHHHH, This is making me MAD. IS ANY OTHER SOLLUTIONS....
Go to the page with the boot breaker and read the full first post. There you will find what to do after the flash of the boot breaker zip file.
Good luck
Sent from my LG-P920 using xda app-developers app