Database Info

Galaxy Tab 2 7.0 restart problem after update to JB

I updated my galaxy tab 2 7.0 p3100 to JB using this steps:
Pre-requisites
1. Install USB Drivers for Samsung Galaxy Tab 2 7.0 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy Tab 2 7.0 should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 per cent.
6. The Android 4.2.2 XXDMG6 Jelly Bean firmware is compatible only with Samsung Galaxy Tab 2 7.0 P3100. Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy Tab 2 7.0 by navigating to Settings >> About Phone.
File Required
1. Android 4.2.2 XXDMG6 Jelly Bean Firmware (Mirror) for Galaxy Tab 2 7.0 P3100
2. Odin 3.07
Steps to Update Galaxy Tab 2 7.0 P3100 with Android 4.2.2 XXDMG6 Jelly Bean Firmware
Step 1: Extract Firmware zip file that you downloaded already from above link using winrar/7zip/winzip or any other extracting tool, you will get a .tar.md5 file and some other files.
Step 2: Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
Step 3: Power off your phone.
Step 4: Boot the device into Download Mode by pressing and holding Volume Down and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 5: Run Odin on the computer as an Administrator.
Step 6: Connect the Galaxy Tab 2 7.0 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.
Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.
Step 7: Choose the following files in Odin from extracted P3100XXDMG6 firmware folder by using respective checkboxes:
Select the PDA checkbox, and choose the file named .tar or .md5.
Click the Phone checkbox, and choose the file with 'modem' in its name (ignore if there is no such file)
Click the CSC checkbox, and select the file with 'csc' in its name (ignore if such file is missing)
Choose the PIT checkbox, and choose the .pit file. Use only the file obtained during extracting in step 1 above, otherwise ignore it.
Step 8: In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox is chosen only if a .pit file was chosen in the previous step.
Step 9: Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the START button to begin the installation process.
Step 10: Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.
The tab was very slow after rebooting with JB but after an hour it worked perfectly and fast. but in the next day it start to restart on it's own endlessly for about 2 hour than stopped restarting and work fine. But now every time I use the tab for no matter what I'm using it for it's begin the restarting loop for an hour at least.
The tab isn't rooted.
What I should do know to stop the restarting loop?

where did you get it the firmware?
what jb version is, 4.1.1 / 4.2.2 / 4.3 ?
my suggests is you have to download firmware from the official samsung sites, if you wanna use the stock rom, then install like you have did it
but if you wanna use the custom rom, you can root the tab first, than install the custom rom, which is included more features, more speed,

godsmack_dmx said:
I updated my galaxy tab 2 7.0 p3100 to JB using this steps:
Pre-requisites
1. Install USB Drivers for Samsung Galaxy Tab 2 7.0 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy Tab 2 7.0 should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 per cent.
6. The Android 4.2.2 XXDMG6 Jelly Bean firmware is compatible only with Samsung Galaxy Tab 2 7.0 P3100. Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy Tab 2 7.0 by navigating to Settings >> About Phone.
File Required
1. Android 4.2.2 XXDMG6 Jelly Bean Firmware (Mirror) for Galaxy Tab 2 7.0 P3100
2. Odin 3.07
Steps to Update Galaxy Tab 2 7.0 P3100 with Android 4.2.2 XXDMG6 Jelly Bean Firmware
Step 1: Extract Firmware zip file that you downloaded already from above link using winrar/7zip/winzip or any other extracting tool, you will get a .tar.md5 file and some other files.
Step 2: Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
Step 3: Power off your phone.
Step 4: Boot the device into Download Mode by pressing and holding Volume Down and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 5: Run Odin on the computer as an Administrator.
Step 6: Connect the Galaxy Tab 2 7.0 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.
Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.
Step 7: Choose the following files in Odin from extracted P3100XXDMG6 firmware folder by using respective checkboxes:
Select the PDA checkbox, and choose the file named .tar or .md5.
Click the Phone checkbox, and choose the file with 'modem' in its name (ignore if there is no such file)
Click the CSC checkbox, and select the file with 'csc' in its name (ignore if such file is missing)
Choose the PIT checkbox, and choose the .pit file. Use only the file obtained during extracting in step 1 above, otherwise ignore it.
Step 8: In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox is chosen only if a .pit file was chosen in the previous step.
Step 9: Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the START button to begin the installation process.
Step 10: Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.
The tab was very slow after rebooting with JB but after an hour it worked perfectly and fast. but in the next day it start to restart on it's own endlessly for about 2 hour than stopped restarting and work fine. But now every time I use the tab for no matter what I'm using it for it's begin the restarting loop for an hour at least.
The tab isn't rooted.
What I should do know to stop the restarting loop?
Click to expand...
Click to collapse
you can try reinstall it again, maybe it will work..

nasheich said:
where did you get it the firmware?
what jb version is, 4.1.1 / 4.2.2 / 4.3 ?
my suggests is you have to download firmware from the official samsung sites, if you wanna use the stock rom, then install like you have did it
but if you wanna use the custom rom, you can root the tab first, than install the custom rom, which is included more features, more speed,
Click to expand...
Click to collapse
I want to use a stock rom and and the version is 4.2.2 I got the update from page called Honai of Android and it say this an official update that have been released in France

godsmack_dmx said:
I want to use a stock rom and and the version is 4.2.2 I got the update from page called Honai of Android and it say this an official update that have been released in France
Click to expand...
Click to collapse
Try reinstall it, after it's done, go to the recovery then wipe cahche n dalvik cache
Sent from my GT-P3100 using XDA Premium 4 mobile app

onueu new
I reinstalled the update again and it's continue to restart so I did reset factory settings and it's work fine now without any problem.
Thanks for help every one

Hey guys
I said in my previous message that the problem is gone but it's back again so I go to recovery mode and try to wipe cache partition and it show an error message and reboot to normal mode.
What I should do than to solve this rebooting issue?

godsmack_dmx said:
Hey guys
I said in my previous message that the problem is gone but it's back again so I go to recovery mode and try to wipe cache partition and it show an error message and reboot to normal mode.
What I should do than to solve this rebooting issue?
Click to expand...
Click to collapse
did ur problem solved???? i too facing similar issue after upgrading the software.. mine too restarting often. cudn do cache partition... any solutions u got?

I think I read somewhere that if you are installing JB rom, your bootloader should also be for JB. I believe one has to use ODIN and use the PDA option to update bootloader. Do you remember doing any of that?

hastemou neglect
mukkani said:
did ur problem solved???? i too facing similar issue after upgrading the software.. mine too restarting often. cudn do cache partition... any solutions u got?
Click to expand...
Click to collapse
No it didn't till now

obmahmood said:
I think I read somewhere that if you are installing JB rom, your bootloader should also be for JB. I believe one has to use ODIN and use the PDA option to update bootloader. Do you remember doing any of that?
Click to expand...
Click to collapse
I used ODIN to update to official samsung JB for my device but I didn't update the bootloader using PDA option.

I did a downgrade to JB 4.1.2 but the tab stuck at samsung animation boot screen but I did manged to enter recovery mode and do a wipe cache partition and restart to know if it gone boot but it did stuck at samsung animation screen than I used odin to but it back to 4.2.2 and it worked fine with no restart for the first 24 hour but it did restart once while I'm using it in the half of the second day and two while I'm recharging it at the end of second day.
And here we are at the third day with no restart for about 15 hour since the last restart.
I hope it's the end for this problem.

Hi guys that xda and you my fellow
Honestly never update when you have a low battery as I did. It causes small booting issues.
Also using Odin I ensured that the firmware updated and then it restarted twice. This happened since I was low on juice.
Later it kind of hung when I restarted. Was a bit upset when it did.
So charged the Phablet p3100.hard and volume up and main key performed a hard reset to the boot. Wiped cache and restarted.
Day 3 since then. Updates are perfect and smooth as ever.
Most of all looks great to onto 4.2.2..looking to see what's cooking in the kitchen and much more even BBM which I had to install from an earlier thread now was accepted from the playstore.
What else.. I'm reading and will keep you posted incase of any failure
Sent from my GT-P3100 using xda app-developers app

[Q] how samsung galaxy fit upgrade to gingerbread?

I have a samsung galaxy fit S-5670 unrooted device and it has Android Foryo 2.2 in it. Although Gingerbread for my device has been oficially launched i'm not able to upgrade my device through Kies software. My device lately has been very buggy like it automatically switches off, keypad doesn't work till i reboot it etc.
I want to upgrade my device manually and i don't know the procedure to do it. I'm new to xda and i've never done rooting and installed custom roms.
Please provide any link to the tutorial for it.
Thanks.

vikrantnegi007 said:
I have a samsung galaxy fit S-5670 unrooted device and it has Android Foryo 2.2 in it. Although Gingerbread for my device has been oficially launched i'm not able to upgrade my device through Kies software. My device lately has been very buggy like it automatically switches off, keypad doesn't work till i reboot it etc.
I want to upgrade my device manually and i don't know the procedure to do it. I'm new to xda and i've never done rooting and installed custom roms.
Please provide any link to the tutorial for it.
Thanks.
Click to expand...
Click to collapse
Read your post in the Guide thread..This is also you might need : ROMs,Recoveries

Try this
vikrantnegi007 said:
I have a samsung galaxy fit S-5670 unrooted device and it has Android Foryo 2.2 in it. Although Gingerbread for my device has been oficially launched i'm not able to upgrade my device through Kies software. My device lately has been very buggy like it automatically switches off, keypad doesn't work till i reboot it etc.
I want to upgrade my device manually and i don't know the procedure to do it. I'm new to xda and i've never done rooting and installed custom roms.
Please provide any link to the tutorial for it.
Thanks.
Click to expand...
Click to collapse
Hi @vikrantnegi007
You can find the required ODIN Firmware Package as you wish for the ODIN tool
http://www.sammobile.com/firmwares/ and put in the Device Model Number and download it
or complete Firmware Package of Gingerbread 2.3.6 DDKT3 you can find the link below
http://hotfile.com/dl/146050815/b3b9...2_INU.zip.html in case this link doesn't work please download the Packages from above link as I can't check it from my office so dntmnd
For ODIN Flashing Tool:
http://www.downloads.techdiscussion....ting-software/
and Procedure to Flash is:
- Shutdown Galaxy Fit and restart it in Recovery Mode. For that hold the volume down key + Home key and power key. Hold it for some seconds and leave it. The device will boot in recovery mode. When the yellow triangle, connect cell phone and a computer with a USB cable.
- Launch ODIN on your system. In that look under ID:COM section. The section will turn to yellow once the device is connected and detected.
- Now click on OPS. It will ask you to browse the downloaded firmware package. Browse to GIO_1.0.ops. Once it is selected click on One Package and choose S5670DDKT3_S5670ODDKT2_S5670DDKT2_HOME.tar.md5.
- Now click on Start. The update process has started and it will take few minutes to complete.
- Once it is done, the device will reboot itself. Later on you can go in Settings and checkout the firmware version.

[Q] {Q}How to restore rom orginal?

Hi.
me need help for install or restore the rom Original Galaxy Fit GT 5670.
plz add step by step.
thanks a lot.
run now in JANA ROM v8.0.

Please, please, please look around in the forum.
http://forum.xda-developers.com/showthread.php?t=1838066
Sent from my CM7 GT-S5570I

me test not work.
usb driver install, But S5570_Odin_Multi_Downloader_v4.38 Not Found.

me test not work.
usb driver install, But S5570_Odin_Multi_Downloader_v4.38 Not Found.
Windows has stopped this device because it has reported problems. (Code 43)
Windows Me 8.1 Prowc x86.

Happy Flashing
AhrimanSefid said:
me test not work.
usb driver install, But S5570_Odin_Multi_Downloader_v4.38 Not Found.
Windows has stopped this device because it has reported problems. (Code 43)
Windows Me 8.1 Prowc x86.
Click to expand...
Click to collapse
AhrimanSefid said:
Hi.
me need help for install or restore the rom Original Galaxy Fit GT 5670.
plz add step by step.
thanks a lot.
run now in JANA ROM v8.0.
Click to expand...
Click to collapse
Hi @AhrimanSefid
You can find the required ODIN Firmware Package as you wish for the ODIN tool
http://www.sammobile.com/firmwares/ and put in the Device Model Number and download it
or complete Firmware Package of Gingerbread 2.3.6 DDKT3 you can find the link below
http://hotfile.com/dl/146050815/b3b9278/S5670DDKT3_S5670ODDKT2_INU.zip.html in case this link doesn't work please download the Packages from above link as I can't check it from my office so dntmnd
For ODIN Flashing Tool:
http://www.downloads.techdiscussion.in/software/download-odin-rooting-software/
and Procedure to Flash is:
- Shutdown Galaxy Fit and restart it in Recovery Mode. For that hold the volume down key + Home key and power key. Hold it for some seconds and leave it. The device will boot in recovery mode. When the yellow triangle, connect cell phone and a computer with a USB cable.
- Launch ODIN on your system. In that look under ID:COM section. The section will turn to yellow once the device is connected and detected.
- Now click on OPS. It will ask you to browse the downloaded firmware package. Browse to GIO_1.0.ops. Once it is selected click on One Package and choose S5670DDKT3_S5670ODDKT2_S5670DDKT2_HOME.tar.md5.
- Now click on Start. The update process has started and it will take few minutes to complete.
- Once it is done, the device will reboot itself. Later on you can go in Settings and checkout the firmware version.
:good::fingers-crossed:

Plz See Image.

[Q] Bricked With Odin...How do I hard Reset?

Hi! I Rooted my Galaxy Tab 2 3100 with Odin. Because the Memory is SO small I tried to unistall some root programs........I blew it....
Now after the Galaxy Tab 2 logo appears it stays in the SAMSUNG logo for ever. Pressing volume up plus power gets you into Odin with 2 choices
Dowload a Rom....stays for Hours downloading and nothing happens
Cancel and reset......back to the same story......
Is there a way of hard resetting?
The rooting I did after I upgardaed to 4.2.2 android version.
HELP ME!! I promess not to fool arround with ROOT programs anymore!!!! Jajajajaja!

Simple - you have download mode, then use it. You know how to use Odin on PC?

Yeah "download" means you hook it up to your computer and send the stock image over Odin. It doesn't download from the Internet or anything like that.
Sent from my Nexus 4 using XDA Premium HD app

Ok....
shakatu said:
Yeah "download" means you hook it up to your computer and send the stock image over Odin. It doesn't download from the Internet or anything like that.
Sent from my Nexus 4 using XDA Premium HD app
Click to expand...
Click to collapse
Thanks a lot! I´m not very good at this, as you can tell..........
Questions:
How do I get it into the "comunication mode" with Odin, where do I download the stock image, and how do I install the image in the tablet.
Thanks again!!

Ok........
luxpiotr said:
Simple - you have download mode, then use it. You know how to use Odin on PC?
Click to expand...
Click to collapse
Hi! Thanks for your answer! Could you tel me how to get it in Download mode, and how to use Odin to repair it? Thanks!

Corto2809 said:
Hi! Thanks for your answer! Could you tel me how to get it in Download mode, and how to use Odin to repair it? Thanks!
Click to expand...
Click to collapse
- Go to sammobile.com and download the latest Stock firmware available for your region.
- On the page where you download the firmware there's also a link to ODIN.
- If the USB drivers aren't already installed just download the "Samsung USB Drivers" (Google's your friend) or install Kies (though when attempting to flash with ODIN _NONE_ of Kies' background processes must run!).
- Unpack the ODIN ZIP archive, right-click the EXE file -> "Run as Administrator"
- Once you're in ODIN click the "PDA" and select the .tar.md5 of the firmware you downloaded
- TURN OFF THE TABLET and DISCONNECT from the charger/USB
- Press and hold POWER + VOL UP
- On the screen that will now show up select "Download Mode"
- Connect the tablet and wait for a second (in case Windows wants to install some driver first)
- Flash
- Disconnect once the tablet restarts and let it do its thing

Thank You!!!
BoneWithABeagle said:
- Go to sammobile.com and download the latest Stock firmware available for your region.
- On the page where you download the firmware there's also a link to ODIN.
- If the USB drivers aren't already installed just download the "Samsung USB Drivers" (Google's your friend) or install Kies (though when attempting to flash with ODIN _NONE_ of Kies' background processes must run!).
- Unpack the ODIN ZIP archive, right-click the EXE file -> "Run as Administrator"
- Once you're in ODIN click the "PDA" and select the .tar.md5 of the firmware you downloaded
- TURN OFF THE TABLET and DISCONNECT from the charger/USB
- Press and hold POWER + VOL UP
- On the screen that will now show up select "Download Mode"
- Connect the tablet and wait for a second (in case Windows wants to install some driver first)
- Flash
- Disconnect once the tablet restarts and let it do its thing
Click to expand...
Click to collapse
Thank you very much!! You saved my life!! Tab2 is running agin!!!

[ROOT] Samsung Galaxy Tab E - T561

Hey guys,
After long search for root for my Tab E - T561, i was able to root my tab with kingoroot pc application. so long story short, i am uploading tar file which will root T561 on kitkat 4.4.4.
How to:
1. Download the attachment
2. Extract it using 7zip or winrar.
3. Download latest Odin 3.10.7 (Google it)
4. Reboot your Tab to Download mode by holding home button, volume down button and power button at the same time.
5. Click AP and choose extracted tar file and Press start.
6. Voila! Rooted Tab E - T561
7. Press Thanks
need any help, PM me

hey tried this but flash failed. now i am stuck at boot logo
imfaraz said:
Hey guys,
After long search for root for my Tab E - T561, i was able to root my tab with kingoroot pc application. so long story short, i am uploading tar file which will root T561 on kitkat 4.4.4.
How to:
1. Download the attachment
2. Extract it using 7zip or winrar.
3. Download latest Odin 3.10.7 (Google it)
4. Reboot your Tab to Download mode by holding home button, volume down button and power button at the same time.
5. Click AP and choose extracted tar file and Press start.
6. Voila! Rooted Tab E - T561
7. Press Thanks
need any help, PM me
Click to expand...
Click to collapse

Any update?
Sent from my SM-T560NU using XDA Free mobile app

sammymcalaxy said:
Any update?
Sent from my SM-T560NU using XDA Free mobile app
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=3300291

Sorry for being so late!
lijoc said:
hey tried this but flash failed. now i am stuck at boot logo
Click to expand...
Click to collapse
What Model do you have there buddy?

- Install Kies3 from samsung.
- It will not recognize the device .... no panic!!!
- Open in menu Tools->Update and initialize firmware
* put the model number and serial number you have in the back of the tablet...
- It will download the proper original firmware from the samsung site and once done push on restore

sm-t561
Not work. F A I L !

bejinaru said:
Not work. F A I L !
Click to expand...
Click to collapse
Do it the proper way!
http://forum.xda-developers.com/showthread.php?t=3302935

How do I do it with out PC

I have the T561M Tablet.
Is there a ROM for android 6 or 7 for the T561M ??? At where???
Because I have ROOT and RECOVERY, but ROM is missing.
sammymcalaxy said:
Any update?
Sent from my SM-T560NU using XDA Free mobile app
Click to expand...
Click to collapse

lijoc said:
hey tried this but flash failed. now i am stuck at boot logo
Click to expand...
Click to collapse
hi. im suffering the same problem after rooting. stuck at boot logo. have you found a way to fix it?

no root t561m
My T561m is with the December 2016 security update and I was not able to do root. Has anything changed? Any suggestion?

ciqvillanueva said:
hi. im suffering the same problem after rooting. stuck at boot logo. have you found a way to fix it?
Click to expand...
Click to collapse
*this way worked for my soft bricked SM-t561 Galaxy tab E. and I hope it'll work for you'll too. after this process all the data from your device will be gone as if it was bought new. Pls make sure you charged your device so that it won't shutdown during the process.
Make sure you have installed samsung USB drives latest version before doing this. If not download it from this link. -----> https://droiddocket.com/download/samsung-usb-drivers-v1-7-23-0/
1.type your model number and search google for flashable firmware for your device. Download it, and unzip it.
2.Download Odin latest version, unzip it and double click Odin3_v3.14.4 file .
3.then you'll get a notification probably, click ok. After that you'll get like this, after that take your soft bricked phone and click power button + volume up /down + home button then
your phone will look like this,
after that connect your device to the computer, on your computer you'll see this.
then click "AP" and select the unzipped firmware you downloaded and click enter.
after that click start and it will start flashing you'll see the progress from your device and from your pc. It will take a while so DON'T un plug the device. after it's done you'll see this in your pc then unplug your device and then it's done.
Don't mind my gramatical mistakes. I hope this helped you.

Lunaworks2007427 said:
*this way worked for my soft bricked SM-t561 Galaxy tab E. and I hope it'll work for you'll too. after this process all the data from your device will be gone as if it was bought new. Pls make sure you charged your device so that it won't shutdown during the process.
Make sure you have installed samsung USB drives latest version before doing this. If not download it from this link. -----> https://droiddocket.com/download/samsung-usb-drivers-v1-7-23-0/
1.type your model number and search google for flashable firmware for your device. Download it, and unzip it.
2.Download Odin latest version, unzip it and double click Odin3_v3.14.4 file .
View attachment 5244307
3.then you'll get a notification probably, click ok. After that you'll get like this, after that take your soft bricked phone and click power button + volume up /down + home button then
your phone will look like this,View attachment 5244319
after that connect your device to the computer, on your computer you'll see this.
View attachment 5244321
then click "AP" and select the unzipped firmware you downloaded and click enter.
View attachment 5244311
after that click start and it will start flashing you'll see the progress from your device and from your pc. It will take a while so DON'T un plug the device. after it's done you'll see this in your pc then unplug your device and then it's done.View attachment 5244329
Don't mind my gramatical mistakes. I hope this helped you.
Click to expand...
Click to collapse
Unfortunately it did not work with rooting, did it as described above.
After the reboot, the tablet hangs at the start screen and does not boot any further.
how can I undo this, because before the device ran without problems

Hello everyone. I need help here.
I have a Samsung SM-T561 & some months ago, I upgraded to version 7.1
Then a few days ago, I wanted to upgrade it to version 10.
That's where things got messed up!
1st. I didn't make a backup of what current ROM.
2nd. I completely forgot to enable USB debugging (again, despite It wasn't the first time I used custom ROM)
3rd. The problem must have been from the ROMS I installed. They didn't work. So I factory resetted EVERYTHING. EVERYTHING. INCLUDING THE SYSTEM.
So basically, I HAD TWRP. I HAD NO OS. I DIDNT TURN ON USB DEBUGGING MODE.
Then I understood that I didn't need ODIN anymore because I had TWRP.
So.
I downloaded the files to flash again. On SD card. And inputted it inside . So it still DIDNT WORK!!
Then I flashed in IMAGE form.
Then my TWRP DISAPPEARED.
IM ON CONSTANT BOOTLOOP.
THE ONLY THING I CAN ACCESS IS THE DOWNLOAD MODE.
AND I CAN NOT CONNECT WITH ODIN BECAUSE I HAVENT TURNED ON USB debugging...
Someone should kindly... please. Get back to me