Database Info

Galaxy Fit GT-S5670 - MIBIB Download & SETUP CONNECTION

This thread is for those friends who are new to android.
I found that many of us, who wants to move from custom roms to stock roms through odin, have faced some big problems like MIBIB download or SETUP CONNECTION . This happened with me as well... when I moved from cyanogenmod to froyo. So, based on my experience, here are some suggestions which may help you:-
When you select the OPS file, check its name. Its name should be "BENI_v1.0.ops" (without quotes) otherwise odin will not show your device's model number at the top and will stop at MIBIB Download. Please Note that as soon as you select the ops file, odin will show the model number of the device in its title bar regardless of whether the phone is physcally connected to PC or not. In my case, the mbib download problem is solved by renaming the OPS file. You can now install the stock firmware as normal.
If odin is showing the message "setup connection" and your Galaxy Fit is still connected to PC (i.e. COM port mapping box is yellow), then try another stock firmware. In my case, odin stopped at setup connection when I was installing froyo, so then I tried the One Package Gingerbread firmware. And Odin successfully installed it(you can also try another usb port). After then, I went for Froyo once again & Odin successfully installed it too.
Please remember that doing things unknowingly may damage your device. Once the phone is in DOWNLOAD MODE, it can not be switched on either normally or in recovery. It can only enter in DOWNLOAD MODE. I had the two firmwares when I did all this.
Hope this helps...
Press thanks if I helped you...

U saved my day ....

stuck at mibib download HELP!!
sir i am stuck at this mibib download....my file name "BENI_v1.0.ops" is exactly same as yours but my odin is not moving further than mibib and whne i tried to go to recovery mode its show a sign displaying a phone disconnected to a pc monitor.....is this sign is harmful for my fit???
Plzzz sir help me out.....

Shubhrank said:
sir i am stuck at this mibib download....my file name "BENI_v1.0.ops" is exactly same as yours but my odin is not moving further than mibib and whne i tried to go to recovery mode its show a sign displaying a phone disconnected to a pc monitor.....is this sign is harmful for my fit???
Plzzz sir help me out.....
Click to expand...
Click to collapse
Note that if ur usb port malfunctions then odin will not proceed further. I recently noticed this major issue. Other errors like "checking plact platform verification" appear due to usb error. Try another pc or laptop(recommended).
1st & 4most, it's necessary that u tick "USB debugging" under "Android Settings->Application Development" b4 going to download mode.
Also, disable any antivirus, firewall...uninstall kies...& at last install/re-install ur Samsung Mobile Drivers. Use Odin 4.38.
The screen u mentioned appears when u exit download mode & try to switch it on either normally or in recovery. Don't worry...!!
1. Take out & re-insert battery.
2. Press "Volume Down & Home & Power button" & you'll again enter downloading mode.
If u want...I can provide u the firmware files that I always use
Hope this helps...!!!

MBIB and setup connection
I have got the same problems of MBIB download or setup connection error and after trying to on it in recovery mode it display image of mobile phone not connected to pc.
Please sort my problem ASAP, as I have only that one phone.:crying:crying:

gaurav.gupta180687 said:
I have got the same problems of MBIB download or setup connection error and after trying to on it in recovery mode it display image of mobile phone not connected to pc.
Please sort my problem ASAP, as I have only that one phone.:crying:crying:
Click to expand...
Click to collapse
Check ur pm.

gaurav.gupta180687 said:
have got the same problems of MBIB download or setup connection error and after trying to on it in recovery mode it display image of mobile phone not connected to pc.
Click to expand...
Click to collapse
Me too. Except on a GT-S5830i. Any help anyone? I have a .pit file etc but not sure what it is. Can't see the device in fastboot either

[Q] how samsung galaxy fit upgrade to gingerbread?

I have a samsung galaxy fit S-5670 unrooted device and it has Android Foryo 2.2 in it. Although Gingerbread for my device has been oficially launched i'm not able to upgrade my device through Kies software. My device lately has been very buggy like it automatically switches off, keypad doesn't work till i reboot it etc.
I want to upgrade my device manually and i don't know the procedure to do it. I'm new to xda and i've never done rooting and installed custom roms.
Please provide any link to the tutorial for it.
Thanks.

vikrantnegi007 said:
I have a samsung galaxy fit S-5670 unrooted device and it has Android Foryo 2.2 in it. Although Gingerbread for my device has been oficially launched i'm not able to upgrade my device through Kies software. My device lately has been very buggy like it automatically switches off, keypad doesn't work till i reboot it etc.
I want to upgrade my device manually and i don't know the procedure to do it. I'm new to xda and i've never done rooting and installed custom roms.
Please provide any link to the tutorial for it.
Thanks.
Click to expand...
Click to collapse
Read your post in the Guide thread..This is also you might need : ROMs,Recoveries

Try this
vikrantnegi007 said:
I have a samsung galaxy fit S-5670 unrooted device and it has Android Foryo 2.2 in it. Although Gingerbread for my device has been oficially launched i'm not able to upgrade my device through Kies software. My device lately has been very buggy like it automatically switches off, keypad doesn't work till i reboot it etc.
I want to upgrade my device manually and i don't know the procedure to do it. I'm new to xda and i've never done rooting and installed custom roms.
Please provide any link to the tutorial for it.
Thanks.
Click to expand...
Click to collapse
Hi @vikrantnegi007
You can find the required ODIN Firmware Package as you wish for the ODIN tool
http://www.sammobile.com/firmwares/ and put in the Device Model Number and download it
or complete Firmware Package of Gingerbread 2.3.6 DDKT3 you can find the link below
http://hotfile.com/dl/146050815/b3b9...2_INU.zip.html in case this link doesn't work please download the Packages from above link as I can't check it from my office so dntmnd
For ODIN Flashing Tool:
http://www.downloads.techdiscussion....ting-software/
and Procedure to Flash is:
- Shutdown Galaxy Fit and restart it in Recovery Mode. For that hold the volume down key + Home key and power key. Hold it for some seconds and leave it. The device will boot in recovery mode. When the yellow triangle, connect cell phone and a computer with a USB cable.
- Launch ODIN on your system. In that look under ID:COM section. The section will turn to yellow once the device is connected and detected.
- Now click on OPS. It will ask you to browse the downloaded firmware package. Browse to GIO_1.0.ops. Once it is selected click on One Package and choose S5670DDKT3_S5670ODDKT2_S5670DDKT2_HOME.tar.md5.
- Now click on Start. The update process has started and it will take few minutes to complete.
- Once it is done, the device will reboot itself. Later on you can go in Settings and checkout the firmware version.

[Q] Lenovo a369i - Cannot connect to my computer

So My Friend Cellphone's "LENOVO A369i" has been Bricked .. I tried to fix it connect it for the first time, uploaded the firmware and IT FIXES :good: :fingers-crossed: but after installing CWM it still okay. After I install a Flash ROM when I Start It again It cannot start but I can go to CWM recovery :crying: I NEED TO FIX it
- Help Is Always Accepted

Flash stock firmware back on.
I'm not home or I would search for links sorry.
In Google type your phone name + return to stock.
Sent from my LG-VS980 using XDA Premium 4 mobile app

1165
The Thing is i cant connect the device to the computer when I plug it in .. it ready in a second again .. it none until it's like that over and over again .. tried to reinstall the drivers but no use!!

PauloAgojo277 said:
The Thing is i cant connect the device to the computer when I plug it in .. it ready in a second again .. it none until it's like that over and over again .. tried to reinstall the drivers but no use!!
Click to expand...
Click to collapse
To put the stock rom back on lenovo device, it must be powered off. (if it has a removable battery it must be removed).
preinstal the drivers into pc/laptop.
open device manager
plug in lenovo.
if device manager says 'mediatek,,,,' you are a winner & can use the sp flash tool included in the zipped rom to instal the rom.
if device manager says 'unknown device' you have 2 seconds to click on it & select update driver and a point to the downloaded lenovo driver (then it will be as above).
When you get green circle you are complete and may disconnect and put battery back in.

PauloAgojo277 said:
So My Friend Cellphone's "LENOVO A369i" has been Bricked .. I tried to fix it connect it for the first time, uploaded the firmware and IT FIXES :good: :fingers-crossed: but after installing CWM it still okay. After I install a Flash ROM when I Start It again It cannot start but I can go to CWM recovery :crying: I NEED TO FIX it
- Help Is Always Accepted
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=50094020
Here's a step by step guide ..please be aware of the steps .. That help me from bricking my phone almost so many times
Sent from my Lenovo A369i using XDA Free mobile app

If you are using windows 8 then you can't install USB drives
---------- Post added at 02:20 AM ---------- Previous post was at 02:12 AM ----------
PauloAgojo277 said:
So My Friend Cellphone's "LENOVO A369i" has been Bricked .. I tried to fix it connect it for the first time, uploaded the firmware and IT FIXES :good: :fingers-crossed: but after installing CWM it still okay. After I install a Flash ROM when I Start It again It cannot start but I can go to CWM recovery :crying: I NEED TO FIX it
- Help Is Always Accepted
Click to expand...
Click to collapse
So if you are using windows 8 or higher version of windows then simply you have to degrade it to windows 7 or lower to install USB driver's

[ROOT] Samsung Galaxy Tab E - T561

Hey guys,
After long search for root for my Tab E - T561, i was able to root my tab with kingoroot pc application. so long story short, i am uploading tar file which will root T561 on kitkat 4.4.4.
How to:
1. Download the attachment
2. Extract it using 7zip or winrar.
3. Download latest Odin 3.10.7 (Google it)
4. Reboot your Tab to Download mode by holding home button, volume down button and power button at the same time.
5. Click AP and choose extracted tar file and Press start.
6. Voila! Rooted Tab E - T561
7. Press Thanks
need any help, PM me

hey tried this but flash failed. now i am stuck at boot logo
imfaraz said:
Hey guys,
After long search for root for my Tab E - T561, i was able to root my tab with kingoroot pc application. so long story short, i am uploading tar file which will root T561 on kitkat 4.4.4.
How to:
1. Download the attachment
2. Extract it using 7zip or winrar.
3. Download latest Odin 3.10.7 (Google it)
4. Reboot your Tab to Download mode by holding home button, volume down button and power button at the same time.
5. Click AP and choose extracted tar file and Press start.
6. Voila! Rooted Tab E - T561
7. Press Thanks
need any help, PM me
Click to expand...
Click to collapse

Any update?
Sent from my SM-T560NU using XDA Free mobile app

sammymcalaxy said:
Any update?
Sent from my SM-T560NU using XDA Free mobile app
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=3300291

Sorry for being so late!
lijoc said:
hey tried this but flash failed. now i am stuck at boot logo
Click to expand...
Click to collapse
What Model do you have there buddy?

- Install Kies3 from samsung.
- It will not recognize the device .... no panic!!!
- Open in menu Tools->Update and initialize firmware
* put the model number and serial number you have in the back of the tablet...
- It will download the proper original firmware from the samsung site and once done push on restore

sm-t561
Not work. F A I L !

bejinaru said:
Not work. F A I L !
Click to expand...
Click to collapse
Do it the proper way!
http://forum.xda-developers.com/showthread.php?t=3302935

How do I do it with out PC

I have the T561M Tablet.
Is there a ROM for android 6 or 7 for the T561M ??? At where???
Because I have ROOT and RECOVERY, but ROM is missing.
sammymcalaxy said:
Any update?
Sent from my SM-T560NU using XDA Free mobile app
Click to expand...
Click to collapse

lijoc said:
hey tried this but flash failed. now i am stuck at boot logo
Click to expand...
Click to collapse
hi. im suffering the same problem after rooting. stuck at boot logo. have you found a way to fix it?

no root t561m
My T561m is with the December 2016 security update and I was not able to do root. Has anything changed? Any suggestion?

ciqvillanueva said:
hi. im suffering the same problem after rooting. stuck at boot logo. have you found a way to fix it?
Click to expand...
Click to collapse
*this way worked for my soft bricked SM-t561 Galaxy tab E. and I hope it'll work for you'll too. after this process all the data from your device will be gone as if it was bought new. Pls make sure you charged your device so that it won't shutdown during the process.
Make sure you have installed samsung USB drives latest version before doing this. If not download it from this link. -----> https://droiddocket.com/download/samsung-usb-drivers-v1-7-23-0/
1.type your model number and search google for flashable firmware for your device. Download it, and unzip it.
2.Download Odin latest version, unzip it and double click Odin3_v3.14.4 file .
3.then you'll get a notification probably, click ok. After that you'll get like this, after that take your soft bricked phone and click power button + volume up /down + home button then
your phone will look like this,
after that connect your device to the computer, on your computer you'll see this.
then click "AP" and select the unzipped firmware you downloaded and click enter.
after that click start and it will start flashing you'll see the progress from your device and from your pc. It will take a while so DON'T un plug the device. after it's done you'll see this in your pc then unplug your device and then it's done.
Don't mind my gramatical mistakes. I hope this helped you.

Lunaworks2007427 said:
*this way worked for my soft bricked SM-t561 Galaxy tab E. and I hope it'll work for you'll too. after this process all the data from your device will be gone as if it was bought new. Pls make sure you charged your device so that it won't shutdown during the process.
Make sure you have installed samsung USB drives latest version before doing this. If not download it from this link. -----> https://droiddocket.com/download/samsung-usb-drivers-v1-7-23-0/
1.type your model number and search google for flashable firmware for your device. Download it, and unzip it.
2.Download Odin latest version, unzip it and double click Odin3_v3.14.4 file .
View attachment 5244307
3.then you'll get a notification probably, click ok. After that you'll get like this, after that take your soft bricked phone and click power button + volume up /down + home button then
your phone will look like this,View attachment 5244319
after that connect your device to the computer, on your computer you'll see this.
View attachment 5244321
then click "AP" and select the unzipped firmware you downloaded and click enter.
View attachment 5244311
after that click start and it will start flashing you'll see the progress from your device and from your pc. It will take a while so DON'T un plug the device. after it's done you'll see this in your pc then unplug your device and then it's done.View attachment 5244329
Don't mind my gramatical mistakes. I hope this helped you.
Click to expand...
Click to collapse
Unfortunately it did not work with rooting, did it as described above.
After the reboot, the tablet hangs at the start screen and does not boot any further.
how can I undo this, because before the device ran without problems

Hello everyone. I need help here.
I have a Samsung SM-T561 & some months ago, I upgraded to version 7.1
Then a few days ago, I wanted to upgrade it to version 10.
That's where things got messed up!
1st. I didn't make a backup of what current ROM.
2nd. I completely forgot to enable USB debugging (again, despite It wasn't the first time I used custom ROM)
3rd. The problem must have been from the ROMS I installed. They didn't work. So I factory resetted EVERYTHING. EVERYTHING. INCLUDING THE SYSTEM.
So basically, I HAD TWRP. I HAD NO OS. I DIDNT TURN ON USB DEBUGGING MODE.
Then I understood that I didn't need ODIN anymore because I had TWRP.
So.
I downloaded the files to flash again. On SD card. And inputted it inside . So it still DIDNT WORK!!
Then I flashed in IMAGE form.
Then my TWRP DISAPPEARED.
IM ON CONSTANT BOOTLOOP.
THE ONLY THING I CAN ACCESS IS THE DOWNLOAD MODE.
AND I CAN NOT CONNECT WITH ODIN BECAUSE I HAVENT TURNED ON USB debugging...
Someone should kindly... please. Get back to me

Screwed something up, HELP needed please

Howdy,
I've screwed up with installing a custom rom over another custom.
Now I'm getting an error:
Firmware upgrade encountered an issue. Please select recovery mode in kies & try again.
It's a tablet:
Samsung Galaxy Tab 2 10.1 (p5100)
In my computer im using windows 10 pro, and adb device is not regonized.
What I neeed to do to get pasted that error?
Thanks for the help!

There is nothing to worry.
It is easy to solve this.
Just download Odin in your pc.
Download the official firmware if your device here.
http://www.sammobile.com/firmwares/database/GT-P5100/
Now open Odin In pc
Connect your device to the pc .
Now in the app under PDA browse for the firmware you have downloaded and click start.
Wait till it says pass.
That's it you have successfully solved your problem.
Now it will take some time to boot.
In case you feel that you are in a bootloop just go to recovery and perform a factory reset .
Odin download http://odindownload.com/download/Odin3_v3.10.6.zip
HIT THANKS IF THIS HELPED YOU :good:

OOO thanks for the reply.
But I'm getting trouble to get into Download Mode, I mean I can't get in no matter what I do.
I've attacked a screen which I thing that Odin get's the device. Is this ok?
Thanks for the support!
_______
I've just flashed the TWRP recovery over the old one and know it works! YAY.... ODIN FTW
Zte blade l said:
There is nothing to worry.
It is easy to solve this.
Just download Odin in your pc.
Download the official firmware if your device here.
http://www.sammobile.com/firmwares/database/GT-P5100/
Now open Odin In pc
Connect your device to the pc .
Now in the app under PDA browse for the firmware you have downloaded and click start.
Wait till it says pass.
That's it you have successfully solved your problem.
Now it will take some time to boot.
In case you feel that you are in a bootloop just go to recovery and perform a factory reset .
Odin download http://odindownload.com/download/Odin3_v3.10.6.zip
HIT THANKS IF THIS HELPED YOU :good:
Click to expand...
Click to collapse

Greetings;
I don't know if you already entered Download Mode...
Most problems accessing Recovery and Download Modes are due to having the USB Cable connected.
Remove the cable; press the key combination; and it will boot.
(Except if there's some incompatible ROM flashed by mistake).
After that plug the USB Cable again (if your USB Drivers have also installed for Download Mode) Odin will recognize it (like shown in your Screen Shot).
REMEMBER:
While Flashing do NOT Remove USB Cable, untill Odin Displays "Pass" message.
Further issues: Let us know. We're would be Glad to help.