Related
Hi,
I bought a HTC Touch Pro today from ebay, all working fine and everything. So I go to flash to the latest energyrom, using this guide:
http://lievenvw.wordpress.com/2008/...c-diamond-or-htc-touch-pro-with-a-custom-rom/
It starts, then has an error saying it was unable to flash and i should check my devidce etc. I look at my phone and it has a whit background and it just says 'Loading ...'. I had to take out the battery to get it back on again.
Everything is fine, my phone works, but I don't think I can flash anymore.
I then read this guide:
http://lievenvw.wordpress.com/2008/...c-diamond-or-htc-touch-pro-with-a-custom-rom/
When i got to this step:
Enter bootloader mode on your phone:
While the device is booting up or with the device turned on, press and hold the volume down button along with the power button, then press the reset button with the stylus tip, then release the volume down and power buttons when bootloader tricolour screen appears.
Everything was fine the tricolour appeared and the text, then suddenly it went back to 'Loading ...'
I really want to flash my phone, and i'm worried I won't be able to know. Ive tried hard reset, but it didn't do anything. Is there anything else I can do?
I've left the loading screen for 20 minutes, i don't think it's doing anything...
If anyone could help me that would be amazing.
Cheers
EDIT:
I just tried flashing with the default firmware, as guided here:
http://forum.xda-developers.com/showthread.php?t=410150
The phone fades to black, and doesn't show anything at all, and then i get ERROR [260] CONNECTION, and tells me to check if it's plugged in etc.
Very strange, i'm really worried I won't be able to fix this..
I had this issue
I had this issue with a Fuze that I had about a week ago.
It comes with a newer version of bootloader.
All you have to do is remove the Sim card and SD Card before you flash. That made the black fading go away and flashing succeeded.
Start by installing Hard SPL first. Once that is in they you can start flashing the rom.
How about reading and posting in the noob flashing thread? Do you know what hard spl, gsm, and cdma are? If not, you're either wasting your time and/or your phone.
Well I am clearly an idiot, thankyou both for you posts, phone is now successfully flashed!
Hey guys I was having some problems with my xoom's wifi on Tiamat's 1.4.4 so i decided to relock the device and use stock.
It's a US model and had build HMJ37 but i decided to follow this thread
http://www.xoomforums.com/forum/mot...4600-thinking-about-unrooting-read-first.html
I downloaded img build HRI66 and followed all the steps and it was ok. Then, i rebooted and now my device is at the motorola logo's dual core screen. Everytime i manually reboot with power and volume up it automatically reboots the device instead of shutting it down, it literally won't shut down and keeps hanging at the moto logo. It just keeps rebooting and getting stuck at the motorola logo. I then unlocked again, and performed the same process with the HRI39 img and still got the same problem
So im stuck. Please help me out guys, i'm in serious ****.
So you have gone as far as the "fastboot erase cache" and "fastboot oem lock" right? This is kind of funny because I tried to install Tiamat 1.1 ROM tonight and ended up going through this HUGE loop of problems.
Here's the problem I had: some time ago I installed ROMManager from the market. I thought it would be easier. It SHOULD be easier. I let it update my recovery to its own version 4.something. It allowed me to SORT OF install the ROM, but I wound up with some persistent system files that weren't getting wiped and a bcm4329.ko version mismatch.
This stumped me for a long time because all I could see was an "Error" message where I was supposed to be able to toggle the wifi on and off. I tried rolling back to my previous ROM. No go. And the culprit the whole time was ROMManager's CWM.
I tried rolling back my recovery.img file to the Tiamat version recommended in this forum. I kept getting all of these crazy "could not mount" errors for pretty much EVERYTHING. I thought my recovery partition was effed. So I rolled back to stock. Followed pretty much the same instructions you linked to.
From there I was able to boot into the stock OS. WiFi worked. I breathed deeply for a minute or two then dove right back in.
If I was in your position I would (and I did, though not from a boot loop) boot into fastboot and unlock the bootloader again. You can do it by holding the Vol down key as the device boots. When fastboot loads type "fastboot oem unlock". Press the Vol down key then the Vol up key. Do that again. Your device is unlocked now! Hooray!
Now you need to install a recovery.img. (I just did this too.) Get the .img file here: http://forum.xda-developers.com/showthread.php?t=1074979
Boot into fastboot again. Put the recovery img file you downloaded into the same directory as your adb and fastboot executables (if you haven't already linked to them in your PATH). Type "fastboot flash recovery recovery-lotsofstuffhere.img". Type "fastboot reboot". 2 seconds after the Motorola logo pops up press the Vol Down key. Then press the Vol Up key to enter recovery.
Ok, here's where I found out what a dumbass I was. I got all of the stupid "can't mount anything" errors again. I thought, HOLY ****. I just did all of that work, spent hours troubleshooting and reformatting and bringing it back to stock and flashing the custom recovery all over again just to run into the SAME error. I really thought I was screwed. Then I found some forum where a guy was complaining about the same error. He realized he was getting it because his sd card was half-way out. I thought - "SD CARD?!?" Some guys told me I needed one earlier too, but the ROMManager CWM didn't require it. It just screwed up my system files. So I popped one in and rebooted. Voila. Everything's kosher. If YOU have the same problem, make sure you've got an SD card in.
Ok, so now you're in recovery. You'll need to flash an OS of course. If you haven't already got it, get Tiamat 1.1 rom. Put it on the sd card. Wipe data/factory reset. Install zip from sd card. You're golden. At least I was. 5 hours later.
-Mike
Hey Mike I'm gonna give this a go. Just when i downloaded the img file to flash through fastboot i got an error saying battery was too lower to perform the recovery....damn it! The xoom isn't able to charge at the moment so i have to wait until it dies i guess (or i hope at least) and then charge it up and try again later.
Thanks again dude, hope i sort this out too. I'll download tiamat 1.1 in the meantime.
DUDE YOU'RE MY ****ING HERO!!!! I got it running can't say if everything is 100% just yet but the fac tthat im back in is enough to thank you so very much Mike!!! What a guy!
It worked? Great that's excellent news. Just out of curiosity - did you get there because you had ROMManager's ClockWorkMod? Or maybe you didn't do a full wipe before flashing a new rom? Or maybe you restored some WiFi settings with Titanium Backup after a new flash? How did you wind up with tthe problem in the first place - you know, for posterity.
well to be honest i am not 100% sure. I think the source of the problem msut have come from my previous installation of tiamat's 1.4.4 rom, it was always actin up on me and i don't believe i wiped the mod before i updated it and that may have done it. I wish i could give you more than just a pseudo answer.
DeeJayCruiser said:
Hey Mike I'm gonna give this a go. Just when i downloaded the img file to flash through fastboot i got an error saying battery was too lower to perform the recovery....damn it! The xoom isn't able to charge at the moment so i have to wait until it dies i guess (or i hope at least) and then charge it up and try again later.
Thanks again dude, hope i sort this out too. I'll download tiamat 1.1 in the meantime.
Click to expand...
Click to collapse
This is why they say to make sure you're plugged in when doing this important stuff, lol.
okantomi said:
This is why they say to make sure you're plugged in when doing this important stuff, lol.
Click to expand...
Click to collapse
Normally, I'd agree but in this rare case, he actually needed it to fully drain because he couldn't get it to power off using any normal method. Weird! so, it seems his only shot was to let it die to finally kill the screen and then start over. Very odd...
From original post
DeeJayCruiser said:
Everytime i manually reboot with power and volume up it automatically reboots the device instead of shutting it down, it literally won't shut down and keeps hanging at the moto logo.
Click to expand...
Click to collapse
farmsatguy said:
Normally, I'd agree but in this rare case, he actually needed it to fully drain because he couldn't get it to power off using any normal method. Weird! so, it seems his only shot was to let it die to finally kill the screen and then start over. Very odd...
From original post
Click to expand...
Click to collapse
You are right...I had forgotten that from the OP. Very strange indeed.
Yeah I dunno why, my xoom was just acting up. It's fantastic now, albeit the wifi still has a couple kinks but android market issues have been resolved, i get much better streams and with tiamat 1.1 everything is already built in and with a quickboot option =)
Xda...where would i be without you!
farmsatguy said:
Normally, I'd agree but in this rare case, he actually needed it to fully drain because he couldn't get it to power off using any normal method. Weird! so, it seems his only shot was to let it die to finally kill the screen and then start over. Very odd...
From original post
Click to expand...
Click to collapse
You should be able to reboot the device using vol up + power, then holding vol down and vol up until it says "Cold booting Linux.....".
This should do the same as letting the battery drain, plugging it in and turning it on.
DeeJay - dunno if you've done this already, but if you haven't you should go back to the Tiamat 1.1 thread and find the Modpack. It fixes the Market update issue and gives you built-in screenshot capabilities and an option to reboot into recovery from the power off menu. It's in there - you just have to scroll down a bit before you find it.
Also - what issues are you having with WiFi?
Thanks for that important tidbit, solarnz. I'm going to file it away for future use.
OMG!!!! Dude you just saved my life! I thought my baby was out the window. I had the exact same problem as you did. I was trying everything from every thread that had anything to do with this problem. I just finished installing and it booted. WHEWWW!!!
Thank u thank u thank u!!
Glad it helped. I'm seeing all kinds of posts in here about the ROMManager CWM. Not good.
Sent from my Xoom using Tapatalk
Never like to have to resort to posting myself but I've had a decent look around the web and can't seem to find a solid solution to my problem so I'm hoping to get some specific help
So I have a UK MZ601 3G Motorola Xoom which was happily running Moray 2.2.1 and had been rooted using the universal root method. Decided to update to 2.2.2 and now my Xoom is stuck in a boot-loop on the custom rippling water boot animation.
The tablet hangs on the first line when trying to boot into recovery so for all my efforts cannot access CWM and perform a hard reset and fresh rom install.
I've tried - and I'm assuming I'm correct in thinking this means I cannot get the Xoom to any stage where I can use adb to attempt to get in to recovery or push files to the system etc. this way.
From what I've read on other forum posts - booting holding volume up and power puts the device into an 'RSD' state which is another method of reflashing the device? I've read this requires an 'SBF' file - which I have seen for download - but believe it only works for the US models?
I've left the boot screen looping overnight - so its not an issue of it just being slow. Because of the custom boot screen I obviously can't return it to the shop as I presume its an obvious warranty void?
Would massively appreciate any help in bringing whats looking increasingly like a £500 paper weight back to life.
Thanks
crozuk said:
Never like to have to resort to posting myself but I've had a decent look around the web and can't seem to find a solid solution to my problem so I'm hoping to get some specific help
So I have a UK MZ601 3G Motorola Xoom which was happily running Moray 2.2.1 and had been rooted using the universal root method. Decided to update to 2.2.2 and now my Xoom is stuck in a boot-loop on the custom rippling water boot animation.
The tablet hangs on the first line when trying to boot into recovery so for all my efforts cannot access CWM and perform a hard reset and fresh rom install.
I've tried - and I'm assuming I'm correct in thinking this means I cannot get the Xoom to any stage where I can use adb to attempt to get in to recovery or push files to the system etc. this way.
From what I've read on other forum posts - booting holding volume up and power puts the device into an 'RSD' state which is another method of reflashing the device? I've read this requires an 'SBF' file - which I have seen for download - but believe it only works for the US models?
I've left the boot screen looping overnight - so its not an issue of it just being slow. Because of the custom boot screen I obviously can't return it to the shop as I presume its an obvious warranty void?
Would massively appreciate any help in bringing whats looking increasingly like a £500 paper weight back to life.
Thanks
Click to expand...
Click to collapse
When you press volume up and power, and hold it, it reboots, yeah? Then you wait about three seconds on dual core screen and tap volume down...what happens then? Do you see android recovery in upper left? Or starting fastboot protocol? Where does it hang? Just trying to see where things are going wrong. If you can get into starting fastboot protocol you are in good shape. If you can get into cwm recovery you should be in great shape. Check out the Xoom Heaven thread in General for some info on recovery.
You are most likely far from bricked...almost all of us have recovered from worse situations than you are in now so just keep cool.
okantomi said:
When you press volume up and power, and hold it, it reboots, yeah? Then you wait about three seconds on dual core screen and tap volume down...what happens then? Do you see android recovery in upper left? Or starting fastboot protocol? Where does it hang? Just trying to see where things are going wrong. If you can get into starting fastboot protocol you are in good shape. If you can get into cwm recovery you should be in great shape. Check out the Xoom Heaven thread in General for some info on recovery.
You are most likely far from bricked...almost all of us have recovered from worse situations than you are in now so just keep cool.
Click to expand...
Click to collapse
Thanks for your reply - tried numerous times getting into recovery - get stuck with one line of 'starting fastboot protocol' and seems to hang there.
Have experience rooting and flash etc. and have obviously used adb in the past.
If I could just get to recovery - or a state where I could use adb I would be fine. But as I said in my first post - looks like I can only access an 'RSD' state.
Is there any other way of getting adb access from my PC? All the help for bricked xooms seems to concern US models - and don't want to try anything that will completely write it off!
Thanks again for your help.
Quick update -
Have retried Fastboot - stuck on 'Starting Fastboot protocol support'
Tried Android Recovery - got stuck on a black screen for a long long time but finally booted!
Wiped and re-installed what I know to be a kosher ROM! Was a scary moment there but thanks for your help and reassurance!
crozuk said:
Quick update -
Have retried Fastboot - stuck on 'Starting Fastboot protocol support'
Tried Android Recovery - got stuck on a black screen for a long long time but finally booted!
Wiped and re-installed what I know to be a kosher ROM! Was a scary moment there but thanks for your help and reassurance!
Click to expand...
Click to collapse
If you are still rooted and all, just for safety's sake, make sure to do another nandroid backup and save it to your micro sdcard. Backup, backup, backup. Then also make sure that you have a compatible cwm recovery installed, that will let you access your microsd card. It sounds like you're alright, so, cool.
So I found this app today and was thrilled at it's potential simplicity (read: Noob Heaven) but after following all of the steps three times I still find myself booting into the stock Fire OS.
Anyone else having this issue?
Yes, I have an issue. This does absolutely nothing. I took a whole day to weigh the pros and cons of rooting and what I would do if it all went wrong. Good joke. Absolutely nothing happened.
Just my luck...
It turned out that my hellish 12 hours trying to get things going with their programme exposed errors in their code so I was the sacrificial lamb. I wound up following another method that I found on this site.
Kindlewater is a root tool, not a new OS
feroxcvpiditas said:
So I found this app today and was thrilled at it's potential simplicity (read: Noob Heaven) but after following all of the steps three times I still find myself booting into the stock Fire OS.
Anyone else having this issue?
Click to expand...
Click to collapse
Hi, I've rooted with kindlewater on my mac. At first I thought nothing had happened because I didn't reboot once it was complete.
If you reboot, you will see the firefirefire logo come up, and it tells you to press the power button until it turns orange, whereby the CWM recovery program, which is the program you will use to install an Android SDK (the new OS you were expecting) or run backups or install other .zip files among many other tasks.
-> if you do not press the power button while the firefirefire logo is displayed, the kindlefire will boot into the regular stock OS.
The yellow triangle with a flame in the middle (like a road sign spelling "caution: ") is the firefirefire bootloader's logo. Wait a few seconds, the firefirefire logo goes away and is replaced by the animated words "Kindle Fire" and it then boots normally.-> If you do, it will boot into CWM recovery and the screen will be all black with red text and a hierarchical, touch-navigable menu structure.
The kindlewater app is not intended (as far as I can see) to actually install alternate OS options for you. It is meant to "root" your device, or in other words, give you superuser permissions such that you are permitted to make permanent system changes to your device.
To summarize: The visible change to your kindlefire after running kindlewater doesnt become visible until you reboot, at which point you will be able to see the change in the bootloader program.
Hope that helps!
sisterdelirious said:
Hi, I've rooted with kindlewater on my mac. At first I thought nothing had happened because I didn't reboot once it was complete.
If you reboot, you will see the firefirefire logo come up, and it tells you to press the power button until it turns orange, whereby the CWM recovery program, which is the program you will use to install an Android SDK (the new OS you were expecting) or run backups or install other .zip files among many other tasks.
-> if you do not press the power button while the firefirefire logo is displayed, the kindlefire will boot into the regular stock OS.
The yellow triangle with a flame in the middle (like a road sign spelling "caution: ") is the firefirefire bootloader's logo. Wait a few seconds, the firefirefire logo goes away and is replaced by the animated words "Kindle Fire" and it then boots normally.-> If you do, it will boot into CWM recovery and the screen will be all black with red text and a hierarchical, touch-navigable menu structure.
The kindlewater app is not intended (as far as I can see) to actually install alternate OS options for you. It is meant to "root" your device, or in other words, give you superuser permissions such that you are permitted to make permanent system changes to your device.
To summarize: The visible change to your kindlefire after running kindlewater doesnt become visible until you reboot, at which point you will be able to see the change in the bootloader program.
Hope that helps!
Click to expand...
Click to collapse
My issue was related to faulty code by the creators which we discovered during chats/emails which prompted them to correct and issue a new update. I opted for other methods that day as I didn't want to wait for their corrections.
Nonetheless, I'm sure others will appreciate your input and advice. Nice of you to take the time to detail it.
Hey guys... I just came across this thread... If you ever have questions email me! I'm willing to help! I see that it has been resolved but I would just like to add, PLEASE LET ME KNOW IF IT DOESN'T WORK! That is the only way I can get it working!
When I buy a Kindle Fire with its latest Firmware from Amazon i think. Can I compleetly decripple this device so that I have something similar to the Samsung Tablet?
Hello, I'm about to giving up,
Something happened to the phone and now it won't boot, it barely show the "ANDROID" logo when it restart itself. I can enter to the recovery menu, it doesn't have clockwork recovery nor twrp, just the basic recovery. So far I tried:
wipe data/factory - didn't work.
wipe cache partition - didn't work
apply update from adb: Adb just work with sideload and that's it, for everything else it shows closed. I tried sending the rom with sideload and it fails every time:
* failed to write data 'protocol fault (couldn't read status): Invalid argument' *
So I took my sdcard and copied the room there, so I tried
apply update from sdcard, it starts and in no time it says:
Installation aborted (APPLY_EXT).
I'm very frustrated right now, nothing works, it seems that the manufacturer did great effort on being the only one who can recover this phone, who appears to be from China, the MTK6582.
Fastboot? it doesn't show the device, it would be my last hope but no, since there is no adb, I cannot call fastboot, and the apply update from adb only work with sideload (yeah, f**k me).
The best course of action would be to throw it to the trash?
Thanks!
Hey, I'm in a similar position to you. However, I went about it with a slightly different route. The chip used in this phone is the MediaTek 6582 (I think?). I downloaded some tools from a thread on here that includes the 320 rom and the necessary software for flashing. I've flashed MediaTek devices before, the Huawei Ascend G610 and G700, both successfully. This one is giving me headaches, the damn device keeps disconnecting. HOWEVER, if you're lucky and you don't have the same problem with disconnecting hardware, you should be able to flash a new rom via the software. It'll take a while though. Also, I don't know what'll happen to your IMEI afterwards, so that's another possible headache (both the G610 and the G700 lost their IMEI info, but I'd taken steps to back them up beforehand so I could just restore them; here, there's no option to backup).
Here's the thread: http://forum.xda-developers.com/android/general/htc-mtk-cpu-flash-files-flashtool-t3114271
Let me know if you need help. I'm screwed in that the damn phone keeps disconnecting. Similar to you, no fastboot either. Plus, no RUU for this HTC. Hell, the internet barely knows this flipping phone.
Cheers, and good luck.
blitz9826
0Camus0 said:
Hello, I'm about to giving up,
Something happened to the phone and now it won't boot, it barely show the "ANDROID" logo when it restart itself. I can enter to the recovery menu, it doesn't have clockwork recovery nor twrp, just the basic recovery. So far I tried:
wipe data/factory - didn't work.
wipe cache partition - didn't work
apply update from adb: Adb just work with sideload and that's it, for everything else it shows closed. I tried sending the rom with sideload and it fails every time:
* failed to write data 'protocol fault (couldn't read status): Invalid argument' *
So I took my sdcard and copied the room there, so I tried
apply update from sdcard, it starts and in no time it says:
Installation aborted (APPLY_EXT).
I'm very frustrated right now, nothing works, it seems that the manufacturer did great effort on being the only one who can recover this phone, who appears to be from China, the MTK6582.
Fastboot? it doesn't show the device, it would be my last hope but no, since there is no adb, I cannot call fastboot, and the apply update from adb only work with sideload (yeah, f**k me).
The best course of action would be to throw it to the trash?
Thanks!
Click to expand...
Click to collapse
Ditto!!!
Hey guys I am having the exact same issue, luckily for me it is my Mrs who done her phone in and not mine . She has the HTC Desire 320, I believe she tried to root it on her own without even asking for advice, I think she used the app Kingo Root, she said she went to remove the root but when she uninstalled the app it didn't remove it. (LOL I told her well perhaps that's because there will be some way of removing it, aside from just uninstalling the app), anyway she proceeded not to care and carried on using her phone as normal for maybe a week or two at most, then about midnight one night, came down and said to me,
"my phone had an update and on restarting I just get a dead android, if you press the power button you get some options so I clicked erase"
Click to expand...
Click to collapse
I was like nice so basically you F***ed it!!!!, and for about 2 weeks now I have been endlessly reading post after post, forum after forum, trying rom after rom, RUU, all kinds of things.
Here is the situation, the phone will boot as far as the HTC logo, it will get stuck in a short loop and reset itself 4/5 times repeating the HTC logo, eventually it will end up at the dead android pic (the android on his back with the red exclaimation mark triangle) with the words 'no command'. From here I can press the power button once to get a list/menu of items (What I assume to be the recovery menu). I can backup data, I can restore the backed up data (both of which do nothing as I guess there is nothing really to back up), There is an option to restore from sd card (which I have tried numerous roms and to no avail have any been successful), I can erase the cache and I can also erase everything and recover, the erase side works fine, I did notice in each of these menu that if you press volume up to activate them and then press the power button once, then the writing dissapears and the android proceeds to have his moving atom type thing in his belly, saying 'erasing..', however even with them completed successfully, it still does not restore.
NOTE!!! If you choose the erase and restore method, once activated with volume up, press the power button to get the spinning atom and erasing... message, when this finishes the phone will reboot, it goes to the htc logo, resets itself, goes to the logo again and then just stays at a black screen (almost like a frozen state, I left it for quite some time and it never changed).
I should also note, which I didn't to begin with, but no matter how long I hold the volume down and power button, there is no such hboot/fast boot menu at all, if you hold the volume down and power button even after it displays the htc logo, the phone just proceeds to endlessly reset and loop through the same process forever.
The only thing I can seem to access with little success, is the ADB CMD prompt through the Android SDK,
Code:
adb devices
will indeed return the device (a set of numbers with the word sideload beside it)
Code:
adb usb
Apart from the odd fluke, this has seemed to fail everytime with either an error about a protocol or an error stating 'closed'
Code:
adb sideload "ROM_FILENAME.ZIP OR .IMG
Occasionally this will throw the protocol error, but generally succeeds and displays the 100% most of the time, however the phone doesn't even try, it just almost instantaniously returns the error message :
Code:
[B][I]Installation Aborted (APPLY_ADB_SIDELOAD)[/I][/B]
NOTE!!! That the android lays on his back with this error, but it only says error below not no command.
I am pretty sure that I already came across a solution very similar to the one you posted above, and I just couldn't get it to recognise the phone, the only way the RUU would work, was by completely removing the battery and plugging in the usb, however without the battery in the phone, it just constantly beeps via usb, so I guess it turns on, then off, then on, then off, forever!!! So the RUU fails everytime, if I leave the battery in and try, the RUU program does nothing whatsoever! So I am at a complete loss with it now.
Cheers
GunnerJnr
Any luck with unbriking the HTC?
Maybe this is the solution, good luck.
Search: How to Unbrick every MTK China Phone ! Preloader / SP Flashtool Fix [HD] on Youtube
Responds please.
http://forum.xda-developers.com/showpost.php?p=64659997&postcount=16
I think that you no tell true because I tried this method with volume keys and nothing. Flash tool still show error. Its impossible to write android without battery. I think really put your phone to rubbish or sell as lcd+digitizer parts I think just we must waiting for new custom rom flashable via stock recovery. 320 is still new model and developers no moke any custom rom. So maybe only HTC service may help, only in HTC Factory peoples know how install android and bootloader on hard bricked device.