Related
UPDATE 08/26/09
http://www.scarlet-arrow.com/index.php?page=08-26-09---wifi-dma
DISCLAIMER
WARNING: This is given to you with the understanding that I nor the developers will be held responsible for any damage done to your phone while using Android.
Thank you for downloading this pre-packaged Android setup.
This is offered for free and I claim no ownership or rights. I am simply making it easier for you. All credit goes to the hard workers of the Android Vogue(Vogue Linux) project and XDA-Developers forums.
All the developers of the Android Project
Reference sites:
http://code.google.com/p/vogue-android/
http://code.google.com/p/vogue-hero/
Click to expand...
Click to collapse
READ ME
http://scarlet-arrow.com
This package is provided by: Natalic
08/26/09
---------------------------------------------------------------
THIS IS A DMA WIFI HERO BUILD:
Thanks goto addisu and dzo for getting a working Wifi module and all the hard working developers who get Android ported to the various devices.
Thanks to JAC for making the base rom (JACHeroski1.6)
This pack was tested and worked before uploading!
Directions:
0) If you have a data.img delete it first!
1) Copy all files from "Required" to the root of your memory card. I recommend at-least a 512mb.
2) Launch haret and click "Run"
2.1) You will need to wait for the data.img (data store) to be created, this takes around 2 minutes. This stores your files.
3) It takes sometime to get to the setup screen. If the screen turns off, just turn it back on. It will come up.
4) Go through the intro of Android (you only do this once)
The first 3 steps get you into Android
The following gets you Wifi (Kaiser/Tilt only)
* In this build, you can now select your WiFi in the setup.
In side Android:
1) Bring the menu up
2) Goto settings
3) Go to Settings -> Wireless Controls then click "Wi-fi" wait until there is a check
4) Select your network under Wi-Fi Settings
6) Make sure you save your "calibration" file and keep a copy of it save so you can just move it to future builds.
House cleaning:
I did not develop any of this kit, I simply put the pieces together and made them available in an easy to use package.
If you need any help please leave a comment in the forum!
To setup APN you must configure it, this can be found on the Android Vogue Wiki( http://code.google.com/p/vogue-android/wikii/HowToInstall )
Click to expand...
Click to collapse
Reserved
This is reserved.
Do we really need another thread for this? Why can't we just get Newbie to clean up his first post in the other thread? Seems kinda redundant...
loserskater said:
Do we really need another thread for this? Why can't we just get Newbie to clean up his first post in the other thread? Seems kinda redundant...
Click to expand...
Click to collapse
Well, the previous one is not for strictly a build, its more for the wikis and stuff. This thread is strictly for downloading a complete package.
cool, I'll bite!
Trying to follow the steps when i type "su"
i get "uid 10027 not allowed to su" , I did a search for this phrase and the only hit i got was the same error, but person asking was ignored.
Any ideas on how to get around this?
I'm running on a Tilt.
Thanks !!
Excellent, any mirror not from rapid or mega?, my network has the storage web filter , a FTP mirror will be great!
Thanks in advance,
natalic said:
This is reserved.
Click to expand...
Click to collapse
So the hero zip file is a rom? and if so can you flash it to a kaiser ?
keep it up...
if its like HTC HERO, it would be nice
Thanks natalic, it works.
Some additional points:
1) Ensure you're getting the file from the rapidshare link. I tried the latest build from the project site (android-1.5-2009-08-04.zip) and I never managed to extract the calibration file
2) There's a hero build here (http://drop.io/calibrationfiles) but I would suggest to get the calibration file out 1st before trying the hero build. It seems that you wont be able to access the terminal easily from Hero builds... (Maybe it's just me)
What works and not in the Android build (non-hero):-
1) Browser works
2) Market works
3) Google Sync works
4) Google maps does not work
loserskater said:
Do we really need another thread for this? Why can't we just get Newbie to clean up his first post in the other thread? Seems kinda redundant...
Click to expand...
Click to collapse
yes it is, android is starting to need a forum all to itself, or you can look at it like this if the android threads are builds from diff "android chefs" then it would be no different than multiple rom threads for diff chefs or diff wm versions.
Heres my working repack. Enjoy
http://www.mediafire.com/?k13tnjton22
Wifi is working great, Tested on an AT&T tilt with no SIM card inserted. Was able to connect to the internet, download from the market, etc.
How do I get SIM to work and get the phone signal?
shadowline said:
Wifi is working great, Tested on an AT&T tilt with no SIM card inserted. Was able to connect to the internet, download from the market, etc.
Click to expand...
Click to collapse
How did you download from market!? It just hangs on "Starting download" for me. Meh!
*Works. Just had to reboot *
TheParadox said:
How did you download from market!? It just hangs on "Starting download" for me. Meh!
*Works. Just had to reboot *
Click to expand...
Click to collapse
Same goes here.
I am now using HERO UI with a calibration file extracted from the standard build. Apps are not being downloaded... Google maps also not working... (Always Force Close)
Paradox: You forgot to mention about rebooting the phone after running getrom.txt as per your instruction in the zip file.
MOUSEY said:
Same goes here.
I am now using HERO UI with a calibration file extracted from the standard build. Apps are not being downloaded... Google maps also not working... (Always Force Close)
Paradox: You forgot to mention about rebooting the phone after running getrom.txt as per your instruction in the zip file.
Click to expand...
Click to collapse
Sorry mate.
MOUSEY said:
Same goes here.
I am now using HERO UI with a calibration file extracted from the standard build. Apps are not being downloaded... Google maps also not working... (Always Force Close)
Paradox: You forgot to mention about rebooting the phone after running getrom.txt as per your instruction in the zip file.
Click to expand...
Click to collapse
I thought the wifi was cooked into the system file? How do you do that?
MOUSEY said:
Same goes here.
I am now using HERO UI with a calibration file extracted from the standard build. Apps are not being downloaded... Google maps also not working... (Always Force Close)
Paradox: You forgot to mention about rebooting the phone after running getrom.txt as per your instruction in the zip file.
Click to expand...
Click to collapse
Is it reasonably responsive on your kaiser? I tried one build of it today, and it was awful. I mean all the features are cool, but no amount of features can replace responsivness...
MOUSEY said:
Same goes here.
I am now using HERO UI with a calibration file extracted from the standard build. Apps are not being downloaded... Google maps also not working... (Always Force Close)
Paradox: You forgot to mention about rebooting the phone after running getrom.txt as per your instruction in the zip file.
Click to expand...
Click to collapse
Can we see any screenshots of this or can you run such a screenshot program on android?
xxbabiboi228xx said:
Can we see any screenshots of this or can you run such a screenshot program on android?
Click to expand...
Click to collapse
The Hero UI works. Its just not that fast. I can vouch for that. I dont know how he has wifi working on it. I could have sworn the driver had to be cooked into the system.img
Android 2.0.1-r5v0.6
Dead:
==============
After spending some time and looking over this rom and ways to make it work with out any legal issues. The most viable option was to build something like what cynanogen has built. His process takes the proprietary bits (all google apps including sync) and copies them off onto the SD card before doing a update. After the update it copies them back to the newly installed rom. This method basically does a automated backup/restore of your licensed applications. I can't do this for several reasons including that we are supposed to be coming from a 1.5 OS to a 2.0.1, which isn't compatible with the older application set.
Temporarily Offline:
==============
I am sorry to have to do this but we are now having more then just a small handful goofing with this ROM and I need to take this offline while I inspect each of the parts and make sure all licensing is in order since its a bit more then the google Opensource framework. I know that several other ROM creators have not paid much attention to it as I am going to now but I really don't want to upset any IP holders like what happened to Cynanogen a couple months back.
I will put it back up but I want to make sure that I am totally covered and don't have any issues.
version 0.6: download (offline)
==============
-fixed wifi thanks to http://forum.xda-developers.com/showthread.php?t=593620
-Now starts up with Android stock keyboard. (No longer needs HTC_IME.apk for second keyboard)
A few have asked for this ROM so I thought I would put it up here for anyone that wants to contribute to or take from it.
This ROM is only compatible with the Sprint CDMA HTC Hero. It is not finished and still requires some work but its good enough for my day to day use and I am sure others may find the same potential.
This ROM is vanilla android and what it takes to actually get it running on a CDMA phone. It is built off of this GSM variant. I am going to try and work to remove the google bits so that you can use Cynanogens method of extracting your own and then doing a follow up update to install them. My efforts for this is not to build a better rom but to build a cleaner base that has limited to no proprietary IP.
Credits to all on this forum how have helped or contributed in any way to building the roms that are here. I would point out names but there are to many to name. I am positive that anyone that pays attention to this forum will know who you are. I used many parts of these ROM's and many others on XDA to build this one.
This is my first ROM and was primarily made for myself to help me learn how to create a custom ROM.
Here is the link to my blog where I originally posted about this and a video of it booting.
Here is the Youtube video of it booting: http://www.youtube.com/watch?v=tRTh-rXKe-E
*Warning*: Don't attempt to flash this ROM onto anything else unless you know what you are doing! I am not responsible for any device malfunctions or "Bricks".
Notes on Installing:
- Run a Nandroid backup before you do anything.
- Make sure you do a full wipe first. (Sorry )
- Run the update zip found * Version 0.6 *(offline) from the recovery console.
To get the HTC keyboard installed: (Now Optional as of Version 0.6)
- Follow the instructions here.
Things that don't work:
- Gallery some times has issues.
- Camera
- Wired or Wireless Tethering (Now Testing)
- Orientation
- Trackball light
- Trackball click (Rolling and moving are fine)
- (Let me know if something else needs to go here.)
Possible issues that are not repeatable:
- speaker not working on out bound calls? I made 30 test calls to my home phone and was not able to replicate this issue. Needs to be verified (see here)
Awesome! Thanks! disregard my PM lol.. Great timing.
VoXHTC said:
Awesome! Thanks! disregard my PM lol.. Great timing.
Click to expand...
Click to collapse
LOL I was just getting to replying to you!
im trying it now nice work
Let me know if any of you have issues flashing. I still have it all right here in front of me if I need to make a change.
FYI: The first boot takes for ever as it registers all the APKS.
i just get the HTC_IME fource close i installed the one from the site like you said and installed it and i get this
thorracing1 said:
i just get the HTC_IME fource close i installed the one from the site like you said and installed it and i get this
Click to expand...
Click to collapse
So you installed both the HTC_IME.apk and the Clicker.apk? Did you do a adb push or a adb install?
Try and go into settings --> Language & Keyboard --> Touch Input --> Text Input?
I think its a force of habit with out really thinking to go there and calibrate but just going there may help.
Try that and let me know.
i just flashed it and pushed the keyboard and calibration app through adb and all is well. its working awesome. Thanks!!!
2.0t03speed said:
i just flashed it and pushed the keyboard and calibration app through adb and all is well. its working awesome. Thanks!!!
Click to expand...
Click to collapse
Awesome, keep the feed back coming as you have it!
please take note orientation doesnt work. please put in first post.
otherwise, great work!
should i do adb install or adb push?
blankd3ckskat3r said:
please take note orientation doesnt work. please put in first post.
otherwise, great work!
Click to expand...
Click to collapse
Got it listed now, that one bugs me... Must have been to worried about building this to remember it.
BTW thanks for the feed back!
thorracing1 said:
should i do adb install or adb push?
Click to expand...
Click to collapse
I would do an install or transfer them to your SD card and grab a app like Astro from the market to install them. Don't worry we will get you worked out.
dchadwick said:
Got it listed now, that one bugs me... Must have been to worried about building this to remember it.
Click to expand...
Click to collapse
lol well its a common problem, cant wait for a fix. really like what you did with this build
dchadwick said:
I would do an install or transfer them to your SD card and grab a app like Astro from the market to install them. Don't worry we will get you worked out.
Click to expand...
Click to collapse
Not able to get a working Keyboard Now I'm stuck in a boot loop. Tried installing through droid explorer.. no go.. tried installing from astro ..no go.. now it loads lockscreen.. dead... reboot..rinse and repeat
removed SDcard.. boots now trying to push.. but where do I push the apk files to?
blankd3ckskat3r said:
lol well its a common problem, cant wait for a fix. really like what you did with this build
Click to expand...
Click to collapse
Thanks, but I really can't take to much credit. Its a "Pick and Pull" from several ROMs. This one actually came from our GSM Brothers and then I used the CDMA tricks in this form to make it work.
I keep watching and playing with the Google Nexus Dumps. I would really like to get one of them up and running.
Based on your posting and replies I assume you are re-using the 2.6.27 kernel like the other roms?
VoXHTC said:
Not able to get a working Keyboard Now I'm stuck in a boot loop. Tried installing through droid explorer.. no go.. tried installing from astro ..no go.. now it loads lockscreen.. dead... reboot..rinse and repeat
Click to expand...
Click to collapse
Wow thats allot in a little space.
What I gather is that it originally booted, then after trying to install via droid explorer and then astro it now just dies after the lockscreen.
I am not sure where to start. I would just say to do a full wipe, then a clean install. Then if you have the sdk try the ADB install method as Cynanogen's post talks about.
I am working on trying to get the stock Android keyboard to work. If we can figure out that then we don't have to mess with the HTC one.
ok i got it i just adb pushed them to system/app works great
obelisk79 said:
Based on your posting and replies I assume you are re-using the 2.6.27 kernel like the other roms?
Click to expand...
Click to collapse
Yeah, actually some of your work if I remember correctly, thats why its got the same issues. My first goal when I built this for my self was to get past the blasted google bits sync loop. The more I worked into it the more I moved on to the 2.0.1 build with some of your stuff in it.
Your welcome to anything I have learned, its really not my work.
.: MarloFroyoBareBones :.
Cyanogen 6.0 RC2 - "ReCooked" Bare Bones Edition
Cyanogen's Thread
http://forum.xda-developers.com/showthread.php?t=722801
After ROM install: Available Space 67.74MB
After gApps install: Available Space 56.75MB
**** PLEASE READ EVERYTHING ****
**** I AM NOT RESPONSIBLE ******
Cyanogen's Pre-Req's Remain for this ROM
:::ROM = REMOVED:::
=Bluetooth.apk
=Browser.apk
=Calculator.apk
=Camera.apk
=DeskClock.apk
=Development.apk
=Email.apk
=Gallery3D.apk
=LiveWallpaperPicker.apk
=Music.apk
=PicoTts.apk
=Protips.apk
=RomManager.apk (I prefer AmonRa)
=SoundRecorder.apk
=SpeechRecorder.apk
=Stk.apk
=term.apk
=ttsservice
=voicedialer.apk
=vpnservices.apk
:::ROM = ADDED:::
=Gallery (Legacy Gallery, Not 3d)
=RealCalc (Full service Calc, not the basic one included)
=Cubed - Music Player
:::GAPPS = REMOVED:::
=Amazon MP3
=GenieWidget.apk
=googlevoice.apk
=kickback.apk
=soundback.apk
=talkback.apk
=talk.apk
=VoiceSearch.apk
I made this to my taste,
but thought I would share.
Most people have 3rd Party apps they use.
If options you need were removed,
this ROM may not be for you.
::: SD Setup :::
Swap
Fat
ext - optional - only has Froyo app2sd
::: TO INSTALL :::
- Do whatever you do for backing up, example: nandroid
- Wipe with this method:
---- While USB plugged to the computer,
---- run the bat in this post and format this way:
http://forum.xda-developers.com/showpost.php?p=6855422&postcount=3
---- to ensure full format, I also use AmonRa recovery wipe options
---- just to be safe
---- If you are comfortable in ADB, then just use it to run this command:
adb shell mount -a; rm -rf /system/*; rm -rf /data/*; rm -rf /cache/*;
---- You can skip the bat file if you do this
- Flash ROM ONLY
- Reboot Device
- After that, change whatever settings you would like. DO NOT INSTALL ANYTHING.
- Just Setup CM settings, wifi, etc (optional)
---- I like to enable wifi and put in my network key
---- so my wifi is going when the market begins
---- to sync my apps
- Reboot Recovey
- Flash GAPPS
- Reboot
- Unlock after reboot and you will be prompted with the Google sign in.
---- After unlock, I usually plug it in, have wifi enabled,
---- set it up under 'USB Debugging' to "stay awake when plugged in"
---- and leave it alone for a bit. This way, you aren't stressing out your system
---- while the market is downloading 100 apps at once lol
---- This is also why I reboot and setup PRIOR to installing gapps.
---- A reboot or three may be needed to ensure everything is settled in nicely
---- If you are wondering where your responsiveness is, look at your downloads
---- in the market, see if you are still syncing. If you reboot during some downloads,
---- you may need to cancel and restart them.
Fully Tested on my G1.
Current Phone Specs:
- Danger SPL
- G1-radio-2_22_23_02
- Dithering OFF (CM Options)
- 96mb Swap
- 512mb ext3 - just in case, this way, if I need an ext partition, I dont
-------------- have to re-format the entire card.
I am not responsible for any outcome
due to your use of this ROM in any way.
Use at your own risk.
Credits:
Cyanogen and everyone who built CM6RC2, as I used it as a base.
SpeedTeam : XxKOLOHExX
Relentless ROM Roaster - relentlessappz.com
ROM Kitchen
XDA Community
=========================================================
Marlo's ROM: http://www.mediafire.com/?mx2jmwxlcpemtnv
Marlo's GAPPS: http://www.mediafire.com/?tdwki25qghodu1d
no camera? :/
jewishjawsh said:
no camera? :/
Click to expand...
Click to collapse
Like I said, I use 3rd party apps for that.
I use Camera Zoom FX and mAPPn360
Those apps are much slower than the stock camera app imo. What's wrong with the camera app included in CM6? Snappy for me
jewishjawsh said:
Those apps are much slower than the stock camera app imo. What's wrong with the camera app included in CM6? Snappy for me
Click to expand...
Click to collapse
As I stated:
I made this to my taste,
but thought I would share.
Most people have 3rd Party apps they use.
If options you need were removed,
this ROM may not be for you.
If you want the app that bad, extract it from CM6 and install it on here.
Or, not use this ROM. Simple.
Great work Marlo, nice light ROM. Keep up the great work and I do appreciate your hard work and thanks for sharing your work.
Also appreciate the work on this Marlo!
Flashing now
You should call this No bloat lol
stlouie65 said:
Great work Marlo, nice light ROM. Keep up the great work and I do appreciate your hard work and thanks for sharing your work.
Click to expand...
Click to collapse
RandumAccess said:
Also appreciate the work on this Marlo!
Flashing now
Click to expand...
Click to collapse
Thanks guys. I appreciate your appreciation.
Zei said:
You should call this No bloat lol
Click to expand...
Click to collapse
I was going to leave the "nes" of Bones...
MarLo FroYo BareBo
So far, no hiccups on my end.
Yea great job now i don't have to do all this myself =]
Bloat-Freeeee
stlouie65 said:
Great work Marlo, nice light ROM. Keep up the great work and I do appreciate your hard work and thanks for sharing your work.
Click to expand...
Click to collapse
answr said:
Yea great job now i don't have to do all this myself =]
Bloat-Freeeee
Click to expand...
Click to collapse
I knew I wasn't the only one who didn't want all the other junk!
Hey marlo, I have a problem. I've never modded my g1 before and decided to do this rom first off. I went back and rooted it and then installed amon ra recovery and did radio update to 2.22 and danger spl.
I flashed your rom through recovery and it booted up fine the first three times but for some reason now it wont stop rebooting. It gets to the home screen, "press menu(my bad) 'swipe' to unlock", for about a second or two and then screen fades as if I did a battery pull. Then boots right back up.
I'm going to try some things when i get home, in recovery, when I wipe before install, am I suppossed to wipe all options in that sub menu? Any help would be much appreciated! Thank you and all others in advance.
Alright still having the same problem. I loaded in recovery and wiped everything except the sdcard partition, which I dont have my sdcard partitioned, so I didnt want to do it and wipe my rom zip.
After wiping everything else I reflashed the rom from sd. And rebooted from recovery. Rom loaded up great and worked perfect on first boot for about an hour until I decided to reboot it to make sure everything was working great and it started again.
Will load up to "swipe to unlock" and once its done preparing sd card it fades like I did a batt pull. Help, please?
Ok, sorry I wasn't following forum rules. I didn't know the meaning of the term "search". I spent a good 45 straight minutes searching just now as well as searching earlier today, but you guys are right, it pays off. I had wifi on, and only after a reboot would it go into the wifi reboot bug because on first launch with no wifi on it would connect without rebooting.
Hey marlo, I have some questions about this build and about a stripped down version of android to run games. Answer on here if you like, but I'll PM you about it.
Sorry for the delay. Your bug may have something to do with cyanogen, or what I removed. CM has been known to do similar things.
I never experienced your scenario, but I'm not saying I doubt you.
Games ran fine for me, I played robo defense all the time.
Thanks for trying my version of CM.
Sent from my SGH-T959 using XDA App
I wanted to use my old g1 as just a game machine. Do u think u can cook me a stripped down rom with the best attributes to run games?
Sent from my T-Mobile myTouch 3G Slide using XDA App
Browser
Hi Marlo , was just wondering how i get the browser back as everytime i install the browser.apk from CM6 it force closes. thanks,
appreciate the ROM as well , great job!
Twinny
Great Job
Great job Marlo. I like what you did with the Mod. Without all other stuff on there my battery last longer. Now i can add the .apk that i want.
This is my first attempt at a custom ROM for any Android device, so bear with me. I did not build this from AOSP source, or any other source code. It's entirely from ASUS. This ROM is intended for those who don't like the stock ASUS apps, similar to KRAKD/FROZN, except I've not optimised any of the APKs or anything else. Hopefully this can be a useful base ROM for another dev, taking the tedious part out of the equation. It's completely based on US, not WW or TW.
It's large(300Mbyte) because I used a binary blob. I'm working on shrinking it down with a proper update sript.
Apps I removed:
Amazon Kindle
MyCloud
ASUS File Manager
MyLibrary
MyNet
Netflix
News & Weather(and their widgets)
PolarisOffice
PressReader
MyZine
Tegra Game Zone
Web Storage
Zinio
PC Sync
ASUS Software keyboard(the touchscreen one, not the dock keyboard)
DMClient(related to ASUS updates, from what I understand)
ASUS software update(so no annoying OTA notifications that you can't use anyway)
SuperNote
-any others not included that I forgot to list
How to install:
1. A complete data wipe(at least dalvik & cache, data is optional) is strongly recommended if you're coming from Honeycomb.
2. Flash the zip from CWM.
3. Enjoy your new ICS.
You should be able to flash from any ROM if you clear at least dalvik and cache.
Features:
-Pre-rooted for your convenience, with busybox, su, and SuperUser.
-ALL bloatware removed, hopefully improving performance
-Closer to an AOSP experience due to all bloat being removed.
What this ROM does NOT have:
-Custom kernel
-Stock ICS buttons(it has the crummy ASUS back, home, recent app buttons)
-Zipaligned APKs
-Deodexed APKs
-A name, since it doesn't really need one right now.
How I created it(roughly, not a step by step):
1. I reverted from a custom ROM(krakd) to the latest US .21 HC release, with stock recovery
2. I Rooted with nachoroot and then used OTA keeper to unroot
3. I updated to US ICS via OTA.
4. I reapplied root with OTA keeper
5. I used ES file manager and terminal to remove the apps
6. I used ES file manager to add SuperUser to /system
7. Installed busybox at some point during these steps, I forget when.
8. Used dd to image the /system partition(mmcblkp0) to a file on my MicroSD
9. Replaced the LNX and APP blobs of a Honeycomb update(.21) with the ICS ones
10. Flashed it, and it worked.
So it's not a "proper" update, broken down into directories and such, but it does work.
Links:
ROM: http://dev-downloads.com/asus-tf101-romwipicsus-9-2-1-11-4-0-3-minimal/
Trebuchet CM9 launcher: http://dl.dropbox.com/u/31118/signed_TrebuchetCWM.zip (thanks to whitekidney/wk on #asus-transformer irc)
Here is the MD5 for the ROM zip: 0B9BC1C83C271DF26501CF533A046CB1
And the SHA1: B7BBC2C3AB33844E46CC8D8D2900E2AF1C68EFB5
Credits:
Whitekidney for the Trebuchet launcher upload
Have you tested this at all?>
Yes, why? It worked fine on my TF101.
I think everyone is always a bit skeptical of a ROM that someone says openly is their first attempt and they have less than 10 posts on here..you are after all talking about potentially rendering a $500 device useless..people are usually right to exercise caution..when the developer cannot post in the dev section because his post count is too low!
But hey, that is how Paul Burton started here, though it was not his first ROM I am quite positive..
daxtsu said:
Yes, why? It worked fine on my TF101.
Click to expand...
Click to collapse
After flashing, not booting anymore, and as I I know what I am doing...unless my power cord just broke.
thanks I guess, but I can remove my own apps From a rom ......
luna_c666 said:
I think everyone is always a bit skeptical of a ROM that someone says openly is their first attempt and they have less than 10 posts on here..you are after all talking about potentially rendering a $500 device useless..people are usually right to exercise caution..when the developer cannot post in the dev section because his post count is too low!
But hey, that is how Paul Burton started here, though it was not his first ROM I am quite positive..
Click to expand...
Click to collapse
Fair enough, I do admit I'm new to Android development, but I wouldn't release something without testing it on my own device first.
DTgreat said:
After flashing, not booting anymore, and as I I know what I am doing...unless my power cord just broke.
Click to expand...
Click to collapse
Did you do a full wipe? I installed it at least 5 times today during testing removing apps with no major issues..
BTW: Here is the MD5 for the zip: 0B9BC1C83C271DF26501CF533A046CB1
And the SHA1: B7BBC2C3AB33844E46CC8D8D2900E2AF1C68EFB5
Yes, although like I said. I know what I am doing. My power cord in fact, may have just broke. (Although I doubt it.)
IF YOU cant post links yet it's for a reason
cool, where did you get the source code from asus?
timbit123 said:
cool, where did you get the source code from asus?
Click to expand...
Click to collapse
It sounds like he got the ROM and removed the third party apps, not that he got the source code to build it to AOSP.
its more a list of apps that are safe to remove with TB...... IMO anyway. Happy to wait and see if it leads to something a bit more though.
Lets make sure that no one will ever want to dev for us anymore by slapping the new guy around who took the time to try something himself. I recall Paul didnt have enough posts to start a thread in dev but he seems to know what hes doing. Why not just ban anyone whos new from ever posting any kind of dev work ever. Because what we need are more people making fun of and trashing someones work instead of people actually willing to take their time and try to make YOUR device nicer. Any wonder if this is why devs are leaving xda every day?
BTW..Just flashed this and it booted just fine. I did a system wipe first.
Maybe you should be the guy to add onskreen framework to a rom....hint
DTgreat said:
Yes, although like I said. I know what I am doing. My power cord in fact, may have just broke. (Although I doubt it.)
Click to expand...
Click to collapse
It's possible. I've had a few reports of it working so far.
KingDavid63 said:
IF YOU cant post links yet it's for a reason
Click to expand...
Click to collapse
I know. It was because my post count was too low.
timbit123 said:
cool, where did you get the source code from asus?
Click to expand...
Click to collapse
I didn't, sadly. I kludged it together somewhat by dding the fully updated ICS /system partition(adding busybox, su, Superuser beforehand) and making it into a blob that's flashable.
robojerk said:
It sounds like he got the ROM and removed the third party apps, not that he got the source code to build it to AOSP.
Click to expand...
Click to collapse
Correct.
Thanks for the feedback guys. If you want anything added, I'll try to accomodate with flashable zips since they're smaller to upload. My upload is horrible, so I can only upload a large ROM every once in a while(it takes over an hour!). I'm not discouraged, I know how it is to be the new guy. I know this rom's probably nothing special, but I just wanted to share what I'm enjoying with others.
daxtsu said:
Yes, why? It worked fine on my TF101.
Click to expand...
Click to collapse
Hey man at least you are the first to have out a custom rom, can't wait to test it out later
Sent from eee pad Transformer running ICS
Lantek23 said:
Hey man at least you are the first to have out a custom rom, can't wait to test it out later
Sent from eee pad Transformer running ICS
Click to expand...
Click to collapse
Haha, it's not that custom, more of a repack with a bunch of removed apps, but I'll look into making it deodexed and stuff. I'm still learning how to do that.
Popping into a best buy and trying a different power cord when my friend gets here. Not trying to naysay. Just trying to troubleshoot.
DTgreat said:
Popping into a best buy and trying a different power cord when my friend gets here. Not trying to naysay. Just trying to troubleshoot.
Click to expand...
Click to collapse
Oh, I know. It's cool.
Hope you get it sorted out soon.
I'll try it out later (I got too many projects going on), but I appreciate your contribution.
As someone who has been around these forums and been messing around with ROMs for a while now (but has never posted before), I applaud the effort. THANKS.
NoThrills A510 Unofficial CyanogenMod 10
version 2012-09-17, built from source
JellyBean for your tablet! Unfortunately, I was not the first to release this... While I was working on it, BenEtNath released his CM10 build, and will forever be recognized as the first developer to bring JellyBean to the Iconia Tab 510 tablets. In future, I'm sure we'll merge our projects, but for now it's fun to learn for the both of us!
Here's what's in this ROM:
Multi-language support: All the languages Android offers are available in this ROM. There are too many to list!
ThrillsKernel (experimental): Click here for full details on the kernel.
Rooted: SU (3.1.1), BusyBox (1.20.2) and SuperUser (3.1.3) installed by default.
Fully Deodexed: Both system apps and system framework.
Zipaligned: For better RAM usage.
/etc/init.d support: Allows you to run your own scripts or mods on boot.
AGPS Patch applied and LTO downloadservice installed: This should get you a faster satellite lock.
Ad-blocking HOSTS file: Makes your browsing experience faster and less annoying.
Various performance tweaks: Yes, even CyanogenMod can be improved!.
Installation:
Step 0:
Check this thread to see if you can help the community before you let us help you!
Step 1:
If you don't have it already, install my CWM-Based Recovery.
Step 2:
Download the ROM from this post, extract the .RAR files and put the .ZIP file on your internal or external SD Card.
Step 3:
Start Recovery by powering down your device, holding the Volume down (**) button and turning it on again.
Step 4:
Make a Nandroid Backup. I can't stress this enough. Select backup and restore and choose one of the backup options.
Step 5:
This step is optional, but recommended when you first install this ROM. Select wipe data/factory reset. Note that this will wipe everything from your data partition, including downloaded apps and settings. Files on your internal or external SD Card are safe.
Step 6:
Install this ROM by choosing install zip from sdcard and then choose zip from sdcard or choose zip from external sdcard.
Step 7:
Wait for the installation to finish (this takes a few minutes). Spend your time reading the text below these installation instructions!
Step 8:
Select reboot system now, and enjoy!
Please read the following carefully before installing this ROM:
I am not responsible for anything you do to your tablet. Whatever you do, you do it at your own risk!
This ROM is pre-rooted.
This ROM does not contain Google Apps, as this is prohibited by the AOSP license. Read below on how to get Google apps, don't use any generic installer!
First boot (after the automatic reboot) will take a while (5 minutes is no exception). Just be patient, it will boot faster next time.
When the tablet has completed booting for the first time, give it another few minutes to get 'up to speed'. It should be much faster after about 5 minutes.
FAQ:
Want themes? Get them somewhere else! I probably don't like your taste, you probably don't like mine. So why pretend? Use this ROM as your base and start theming yourself!
Want mods? Your ideas might be good in your situation, they probably aren't in mine. Again, use this ROM as your base and start modding yourself!
Found bugs? Let me know! Although I can't promise I'll be able to fix them all, at least I will try.
Want to use this ROM as base for your own? Go ahead, make my day. But do credit me with a link to this thread, so people can also taste my flavorless contraptions.
Want to give me your first born baby? I'd rather not have that, but if you really want to give me something: Either click the 'Donate to me' button on the left, or simply hit the 'Thanks' button on this post.
Changelog:
See second post.
Downloads:
NoThrills CyanogenMod 10 20120917 (mirror) (mirror)
(MD5 for the .ZIP file: 074f81852d1a1641a499eb0821177192)
Google Apps:
The Google Apps are not included in this ROM. Also, because Acer partitioned our device with only 344MB for system files, we're running out of space with JellyBean builds. To remedy this, I have crafted a Google Apps package custom-made for my CyanogenMod 10 build. It will install most of the files to the FlexROM, leaving you with about 90MB space on the system partition.
This package installs the Play Store, Facelock, Gmail, YouTube, Google Maps, Street View, Google+, Talk, VoiceSearch (Google Now), and Talkback.
NoThrills Google Apps 20120917 (mirror ) (mirror )
Note: Don't use this installer on other ROMs, and don't use other Google Apps installers on this ROM. It will mess things up!
Changelog:
2012-09-17
Initial release
:victory: It's NoThrills Bonanza Night :victory:
New release: ThrillsKernel for the Acer Iconia TAB A510
New release: NoThrills A510 Unofficial CyanogenMod 10
Update: CWM-based Recovery 6.0.1.4
Update: NoThrills A510 WorldWide optimized Stock ROM
Update: NoThrills A510 "Franken700" Stock ROM
sounds fantastic. I will test it right away and give feedback.
Will test it right now! I am very curious! Can you fix the Dolby driver for CM10? I miss it! The sound was not so loud on benetnath's CM10.
edit: benetnath, good to read your reply... I thought maybe this would become a battle
Great news !! Thx ur so much. :fingers-crossed:
Downloading now.
Fyi , nothrills gently PMed me about the release yesterday to prevent any trouble
there is absolutely no conflict in that, and in fact, I'm really happy that he takes the lead on that.
Thanks for the kind mention on OP, I do not deserve it a lot as my major work was porting the great work of pawtip but it's nice to have been for a while the current releaser of android 4.1 for this great device we own
The only thing that is sad for me is that I'm not even sure I'll flash own build once I get mytab back.. strange situation isn 't it. .
anyway thanks a lot nothrills
I'm really happy that you join the story, because without your recovery, I would not have been able to release my cm10
NoThrills said:
:victory: It's NoThrills Bonanza Night :victory:
New release: ThrillsKernel for the Acer Iconia TAB A510
New release: NoThrills A510 Unofficial CyanogenMod 10
Update: CWM-based Recovery 6.0.1.4
Update: NoThrills A510 WorldWide optimized Stock ROM
Update: NoThrills A510 "Franken700" Stock ROM
Click to expand...
Click to collapse
you're sadistic .... which one to choose ?
BENETNATH said:
Fyi , nothrills gently PMed me about the release yesterday to prevent any trouble
there is absolutely no conflict in that, and in fact, I'm really happy that he takes the lead on that.
Thanks for the kind mention on OP, I do not deserve it a lot as my major work was porting the great work of pawtip but it's nice to have been for a while the current releaser of android 4.1 for this great device we own
The only thing that is sad for me is that I'm not even sure I'll flash own build once I get mytab back.. strange situation isn 't it. .
anyway thanks a lot nothrills
I'm really happy that you join the story, because without your recovery, I would not have been able to release my cm10
Click to expand...
Click to collapse
your work was also much appreciated.
Update: first impression. Your boot animation ist f****** amazing.
i like the new boot animation!! :good:
BENETNATH said:
Fyi , nothrills gently PMed me about the release yesterday to prevent any trouble
there is absolutely no conflict in that, and in fact, I'm really happy that he takes the lead on that.
Thanks for the kind mention on OP, I do not deserve it a lot as my major work was porting the great work of pawtip but it's nice to have been for a while the current releaser of android 4.1 for this great device we own
The only thing that is sad for me is that I'm not even sure I'll flash own build once I get mytab back.. strange situation isn 't it. .
anyway thanks a lot nothrills
I'm really happy that you join the story, because without your recovery, I would not have been able to release my cm10
Click to expand...
Click to collapse
I hope you keep on devving so we can get the best software for our devices :good: Plus, I still need help with all the git stuff, so we can team up :highfive:
picard47 said:
Update: first impression. Your boot animation ist f****** amazing.
Click to expand...
Click to collapse
skymario said:
i like the new boot animation!! :good:
Click to expand...
Click to collapse
And it comes in blue (stock ROM) and green (Franken700 ROM) too!
Two bugs:
1080p filming doesnt work at the first time, second time it's perfect
- Google Voice search FCs after you said something, even after reboot
But I never use it so no big deal.. it's blazing fast! Thanks!
Great Job!
I'll wait a few returns and corrections before to use this rom .. I use my tablet quite extensively like playing Tegra 3 Games and HD movies.
great work...again
and System is mountable r/w ... GREAT !
Wow, this ROM is very cool. Thanks for the work!
I noticed that there's no sensitivity setting, though? Was that canned in CM10?
Boergen
Boergen said:
Wow, this ROM is very cool. Thanks for the work!
I noticed that there's no sensitivity setting, though? Was that canned in CM10?
Boergen
Click to expand...
Click to collapse
Not that it was canned in CM10. But I think (and someone slap me if I'm wrong) the sensitivity setting is an Acer ROM feature.
A very badly implemented feature at that.
Report:
- 1080p movie player, not lag at all, perfect.
- USB pendrive working
- External SD card can access
- touch screen work perfect
- camera ok
- 1080p video capture ok
- wifi ok
- internet browser ok.
Maybe bug
- no more Dolby surround sound, sound very softly
THis rom really smooth, very enjoyable. :good:
Omg omg thank you!!! Works like a charm for me. No issues thus far!!!
Wooooooo!!!!
Sent from my Galaxy Nexus using Tapatalk 2
cannot play youtube in facebook.
no more flash player in google play.
skymario said:
cannot play youtube in facebook.
no more flash player in google play.
Click to expand...
Click to collapse
It is Jelly Bean buddy. Say thanks to Adobe.