UPDATE 08/26/09
http://www.scarlet-arrow.com/index.php?page=08-26-09---wifi-dma
DISCLAIMER
WARNING: This is given to you with the understanding that I nor the developers will be held responsible for any damage done to your phone while using Android.
Thank you for downloading this pre-packaged Android setup.
This is offered for free and I claim no ownership or rights. I am simply making it easier for you. All credit goes to the hard workers of the Android Vogue(Vogue Linux) project and XDA-Developers forums.
All the developers of the Android Project
Reference sites:
http://code.google.com/p/vogue-android/
http://code.google.com/p/vogue-hero/
Click to expand...
Click to collapse
READ ME
http://scarlet-arrow.com
This package is provided by: Natalic
08/26/09
---------------------------------------------------------------
THIS IS A DMA WIFI HERO BUILD:
Thanks goto addisu and dzo for getting a working Wifi module and all the hard working developers who get Android ported to the various devices.
Thanks to JAC for making the base rom (JACHeroski1.6)
This pack was tested and worked before uploading!
Directions:
0) If you have a data.img delete it first!
1) Copy all files from "Required" to the root of your memory card. I recommend at-least a 512mb.
2) Launch haret and click "Run"
2.1) You will need to wait for the data.img (data store) to be created, this takes around 2 minutes. This stores your files.
3) It takes sometime to get to the setup screen. If the screen turns off, just turn it back on. It will come up.
4) Go through the intro of Android (you only do this once)
The first 3 steps get you into Android
The following gets you Wifi (Kaiser/Tilt only)
* In this build, you can now select your WiFi in the setup.
In side Android:
1) Bring the menu up
2) Goto settings
3) Go to Settings -> Wireless Controls then click "Wi-fi" wait until there is a check
4) Select your network under Wi-Fi Settings
6) Make sure you save your "calibration" file and keep a copy of it save so you can just move it to future builds.
House cleaning:
I did not develop any of this kit, I simply put the pieces together and made them available in an easy to use package.
If you need any help please leave a comment in the forum!
To setup APN you must configure it, this can be found on the Android Vogue Wiki( http://code.google.com/p/vogue-android/wikii/HowToInstall )
Click to expand...
Click to collapse
Reserved
This is reserved.
Do we really need another thread for this? Why can't we just get Newbie to clean up his first post in the other thread? Seems kinda redundant...
loserskater said:
Do we really need another thread for this? Why can't we just get Newbie to clean up his first post in the other thread? Seems kinda redundant...
Click to expand...
Click to collapse
Well, the previous one is not for strictly a build, its more for the wikis and stuff. This thread is strictly for downloading a complete package.
cool, I'll bite!
Trying to follow the steps when i type "su"
i get "uid 10027 not allowed to su" , I did a search for this phrase and the only hit i got was the same error, but person asking was ignored.
Any ideas on how to get around this?
I'm running on a Tilt.
Thanks !!
Excellent, any mirror not from rapid or mega?, my network has the storage web filter , a FTP mirror will be great!
Thanks in advance,
natalic said:
This is reserved.
Click to expand...
Click to collapse
So the hero zip file is a rom? and if so can you flash it to a kaiser ?
keep it up...
if its like HTC HERO, it would be nice
Thanks natalic, it works.
Some additional points:
1) Ensure you're getting the file from the rapidshare link. I tried the latest build from the project site (android-1.5-2009-08-04.zip) and I never managed to extract the calibration file
2) There's a hero build here (http://drop.io/calibrationfiles) but I would suggest to get the calibration file out 1st before trying the hero build. It seems that you wont be able to access the terminal easily from Hero builds... (Maybe it's just me)
What works and not in the Android build (non-hero):-
1) Browser works
2) Market works
3) Google Sync works
4) Google maps does not work
loserskater said:
Do we really need another thread for this? Why can't we just get Newbie to clean up his first post in the other thread? Seems kinda redundant...
Click to expand...
Click to collapse
yes it is, android is starting to need a forum all to itself, or you can look at it like this if the android threads are builds from diff "android chefs" then it would be no different than multiple rom threads for diff chefs or diff wm versions.
Heres my working repack. Enjoy
http://www.mediafire.com/?k13tnjton22
Wifi is working great, Tested on an AT&T tilt with no SIM card inserted. Was able to connect to the internet, download from the market, etc.
How do I get SIM to work and get the phone signal?
shadowline said:
Wifi is working great, Tested on an AT&T tilt with no SIM card inserted. Was able to connect to the internet, download from the market, etc.
Click to expand...
Click to collapse
How did you download from market!? It just hangs on "Starting download" for me. Meh!
*Works. Just had to reboot *
TheParadox said:
How did you download from market!? It just hangs on "Starting download" for me. Meh!
*Works. Just had to reboot *
Click to expand...
Click to collapse
Same goes here.
I am now using HERO UI with a calibration file extracted from the standard build. Apps are not being downloaded... Google maps also not working... (Always Force Close)
Paradox: You forgot to mention about rebooting the phone after running getrom.txt as per your instruction in the zip file.
MOUSEY said:
Same goes here.
I am now using HERO UI with a calibration file extracted from the standard build. Apps are not being downloaded... Google maps also not working... (Always Force Close)
Paradox: You forgot to mention about rebooting the phone after running getrom.txt as per your instruction in the zip file.
Click to expand...
Click to collapse
Sorry mate.
MOUSEY said:
Same goes here.
I am now using HERO UI with a calibration file extracted from the standard build. Apps are not being downloaded... Google maps also not working... (Always Force Close)
Paradox: You forgot to mention about rebooting the phone after running getrom.txt as per your instruction in the zip file.
Click to expand...
Click to collapse
I thought the wifi was cooked into the system file? How do you do that?
MOUSEY said:
Same goes here.
I am now using HERO UI with a calibration file extracted from the standard build. Apps are not being downloaded... Google maps also not working... (Always Force Close)
Paradox: You forgot to mention about rebooting the phone after running getrom.txt as per your instruction in the zip file.
Click to expand...
Click to collapse
Is it reasonably responsive on your kaiser? I tried one build of it today, and it was awful. I mean all the features are cool, but no amount of features can replace responsivness...
MOUSEY said:
Same goes here.
I am now using HERO UI with a calibration file extracted from the standard build. Apps are not being downloaded... Google maps also not working... (Always Force Close)
Paradox: You forgot to mention about rebooting the phone after running getrom.txt as per your instruction in the zip file.
Click to expand...
Click to collapse
Can we see any screenshots of this or can you run such a screenshot program on android?
xxbabiboi228xx said:
Can we see any screenshots of this or can you run such a screenshot program on android?
Click to expand...
Click to collapse
The Hero UI works. Its just not that fast. I can vouch for that. I dont know how he has wifi working on it. I could have sworn the driver had to be cooked into the system.img
Related
!!THIS NAVIGATION IS !!ONLY!! FOR THE USA!!
!!Paid apps work!!
Facebook has now been removed!!
Hey guys,
After a longs day of work, I got it.
Put together a recovery flash-able zip file to add the new Google navigation.
REQS:
1. Dream or Sapphire/Magic/Mt3G
2. 1.6 Rom as a minimum
3. Custom recovery either Amon's or Cyanogen's
4. A brain
5. The download at the end of the post
STEPS:
1. Download this for most Donut builds (Cyanogen based).
2. Place in the root of your sdcard
3. Reboot in recovery
3. Select chose update.zip (or rename the downloaded file to update.zip)
4. Select update_navigation.zip
5. Reboot
Extended steps:
If "Navigate" doesn't show up the first time:
1. Go to settings
2. Click on applications
3. Click on Manage applications
4. scroll to apps
5. click on Maps
6. Clear data
OR
1. Install Google Voice
2. Uninstall Google Voice
3. Reinstall Google Voice
****MOST IMPORTANT PART****
Thanks:
Cyanogen and Amon for their recovery images.
followinginsanity for his updates to build props
community for helping test and get it goooinnggggg!!
clyde8 for the better build string
Donation shoutouts:
Suma Software Inc
If you actually feel like donating to my trip fund go ahead and click here!!
!THANKS!
AND ENJOY
Q&A
Q: Why was facebook removed??
A: it caused to many issues, and the market one works fine.
Q: What is the latest changes??
A: I removed the build.prop file completely in hopes that it will work without it, did for me... you tell me
Q: What took so long?!?!
A: I had H1N1, b|0W me.
Q: Does this work with AOSP?
A: doesn't look like it, at least not so far, I did adjust some build props right from them but never got any feedback to let it out to the masses.
Q: Does this break CM-Updater?
A: No, it shouldn't.
Q: Do i need to reflash this every time?
A: if you want navigation, yes. Every update reverts the build props back to the old ones.
Q: Does this work outside of the USA?
A: Yes. BUT BUT BUT BUT BUT BUT BUT BUT BUT YOU MUST FOLLOW THESE DIRECTIONS EXACTLY!
1. First navigate between 2 USA addresses (just enter them in to get the navigate option to show up)
2. Make a shortcut on your home screen with the address you want to navigate to.
3. Make sure turn by turn is checked.
4 click it nub.
5. drive to the location
6. brag "o mai android is wai b3tt3r thian UR ip0ne."
7. hope to god it brings you back home, otherwise buy a map.
If your paid apps are not working, either wait until midnight, for caches to clear, or flash from scratch...
IE: recovery - rooted cyano - Cyano update - navi update
(p.s not responsible if you drive over a bridge following the GPS, that's stupidity)
(p.p.s don't brick your shaz and blame me or anyone else for that matter, you blew it)
Not seeing anything different. I'm using a MT3G with CM-4.2.4.
Tried...
Code:
*EDIT*
There is possibly one more step....
..try this if it doesn't work..
1. Settings
2. Applications
3. Manage Applications
4. Find maps
5. Clear data
fishman0919 said:
Not seeing anything different. I'm using a MT3G with CM-4.2.4.
Tried...
Code:
*EDIT*
There is possibly one more step....
..try this if it doesn't work..
1. Settings
2. Applications
3. Manage Applications
4. Find maps
5. Clear data
Click to expand...
Click to collapse
as in it didn't work???
theomajigga said:
as in it didn't work???
Click to expand...
Click to collapse
No go. Looks just like the reg Google Map. No Nav option
Didn't work on HTC Magic 32A running CM4.2.4
allenk said:
Didn't work on HTC Magic 32A running CM4.2.4
Click to expand...
Click to collapse
Might have something to do with 32A board.
Didnt work on my 32A Magic, i lost all connectivity after flashing this, no 3g, wifi, or anything. Anyone know how to get it back?
Update: Didnt work on my wife's 32B either, lost all connectivity as well.
32B
New maps but no navigation
I would be careful with this app. Sure it's nice to have it running on your Magic, but remember when Cyanogen relased his ROMs with Google apps included?
Pulling this Google Maps from any other ROM is in clear violation of the license.
I'd prefer that our community stay legal and not attract any negative attention.
cursordroid said:
I would be careful with this app. Sure it's nice to have it running on your Magic, but remember when Cyanogen relased his ROMs with Google apps included?
Pulling this Google Maps from any other ROM is in clear violation of the license.
I'd prefer that our community stay legal and not attract any negative attention.
Click to expand...
Click to collapse
good point, but it seems to me that Cyanogen is the only one that is following that rule. Dwang and Amon_Ra have stock ROM's that include the google apps as well, but they don't get any legal action taken against them, but I don't know why this new rule only applies to Cyanogen and not everyone else. All the Hero ROM's also include Google apps as well. It seems that the violation of the license has only affected Cyanogen and it seems unfair to me.
agreed. and if i get one it comes down, thats just life
No service No Maps
I've got a Rogers 32a Sapphire running RAv1.6.2. After installing the update I had No Service, APN setting were Blank and the maps app had a new icon and it Forced closed when opened every time. I did try clearing the maps cache and restarting the phone, but it didn't help.
I made a back up before installing the update, so its all back to normal now. Have any suggestions on what went wrong or anything else i can try to get it working??
Thanks
-Zeroeffekt
Zeroeffekt said:
I've got a Rogers 32a Sapphire running RAv1.6.2. After installing the update I had No Service, APN setting were Blank and the maps app had a new icon and it Forced closed when opened every time. I did try clearing the maps cache and restarting the phone, but it didn't help.
I made a back up before installing the update, so its all back to normal now. Have any suggestions on what went wrong or anything else i can try to get it working??
Thanks
-Zeroeffekt
Click to expand...
Click to collapse
Personally I'm sure it has to do with the 32A board..
Got it working. This worked for me.
Got it working! Sweet. I forgot that you need to download a tts app for this to work!
tazz9690 said:
Got it working! Sweet. I forgot that you need to download a tts app for this to work!
Click to expand...
Click to collapse
This probably should be in the first post. TTS needs to be installed.
Just wanted to say thanks man. I used it to get home today. It was nice seeing it resting on my cars instrument window just behind the stiring wheel.
I got this working on my 32A rogers.
I used the CM 4.2.4, and installed "[EBI1/32A] CyanogenMod EBI1/32A Port 4.2.4" - thanks Radix999!
It didnt work at first, so i did the clear map thing, and it still didnt work.
So then I downloaded google voice from market, installed it, then uninstalled it, then reinstalled it, and now the navigate option is available! - thanks xEM1x for the tip! - http://forum.xda-developers.com/showpost.php?p=4936615&postcount=55
theomajigga said:
Personally I'm sure it has to do with the 32A board..
Click to expand...
Click to collapse
I disagree. I got it working on my 32a. I'd like to share how I got it working, but I honestly don't know what I did. The maps app would launch, but there was no nav. I cleared data in the manage programs menu and it mysteriously started working.
cant get this to work on my mt3g
using amon_ra's 1.6 donut rom, flashed navi afterwards, and has no service (3g, wifi, anything) so can't even dl google voice to try to mend the problem
anyone else with this issue?
using this rom:
http://forum.xda-developers.com/showthread.php?t=538645
!!THIS NAVIGATION IS !!ONLY!! FOR THE USA!!
!!Paid apps work!!
Facebook has now been removed!!
Release Name:update_navigation.zip
Release Version:FINAL
MD5 Sum:N/A (verified working)
Credits:See below
Base Firmware:1.6
Radio Required:N/A
SPL Required:N/A
Partition Layout:N/A
Wipe Required:N
Special instructions:See below
Download:See attachment or, 4shared link
Hey guys,
After a longs day of work, I got it.
Put together a recovery flash-able zip file to add the new Google navigation.
REQS:
1. Dream or Sapphire/Magic/Mt3G
2. 1.6 Rom as a minimum
3. Custom recovery either Amon's or Cyanogen's
4. A brain
5. The download at the end of the post
STEPS:
1. Download this for most Donut builds (Cyanogen based). (also attached now )
2. Place in the root of your sdcard
3. Reboot in recovery
3. Select chose update.zip (or rename the downloaded file to update.zip)
4. Select update_navigation.zip
5. Reboot
Extended steps:
If "Navigate" doesn't show up the first time:
1. Go to settings
2. Click on applications
3. Click on Manage applications
4. scroll to apps
5. click on Maps
6. Clear data
OR
1. Install Google Voice
2. Uninstall Google Voice
3. Reinstall Google Voice
****MOST IMPORTANT PART****
Thanks:
Cyanogen and Amon for their recovery images.
followinginsanity for his updates to build props
community for helping test and get it goooinnggggg!!
clyde8 for the better build string
Brut.al for the (possible) navigation out of USA!
Donation shout-outs:
Suma Software Inc
If you actually feel like donating to my trip fund go ahead and click here!!
!THANKS!
AND ENJOY
Q&A
Q: Navigation is not showing up!
A: you must first "get directions" for the option to show up, it is in that pane
A: MAKE SURE YOU ENABLE GPS!!!
Q: Why was facebook removed??
A: it caused to many issues, and the market one works fine.
Q: What is the latest changes??
A: I removed the build.prop file completely in hopes that it will work without it, did for me... you tell me
Q: What took so long?!?!
A: I had H1N1, b|0W me.
Q: Does this work with AOSP?
A: doesn't look like it, at least not so far, I did adjust some build props right from them but never got any feedback to let it out to the masses.
Q: Does this break CM-Updater?
A: No, it shouldn't.
Q: Do i need to reflash this every time?
A: if you want navigation, yes. Every update reverts the build props back to the old ones.
Q: Does this work outside of the USA?
A: Yes. BUT BUT BUT BUT BUT BUT BUT BUT BUT YOU MUST FOLLOW THESE DIRECTIONS EXACTLY!
1. First navigate between 2 USA addresses (just enter them in to get the navigate option to show up)
2. Make a shortcut on your home screen with the address you want to navigate to.
3. Make sure turn by turn is checked.
4 click it nub.
5. drive to the location
6. brag "o mai android is wai b3tt3r thian UR ip0ne."
7. hope to god it brings you back home, otherwise buy a map.
If your paid apps are not working, either wait until midnight, for caches to clear, or flash from scratch...
IE: recovery - rooted cyano - Cyano update - navi update
(p.s not responsible if you drive over a bridge following the GPS, that's stupidity)
(p.p.s don't brick your shaz and blame me or anyone else for that matter, you blew it)
Im trying it now will get back to you
nick8197 said:
Im trying it now will get back to you
Click to expand...
Click to collapse
just for s&g are you a dream, and what Cyanogen are you running...
just want to get as much info as possible
Im on a dream/g1
Im using dwang with theme
do you think it will work I havent done it yet
will test as soon as my slow internet loads
how exactly does this one work? meaning what exactly does it change? does it still affect the build.prop and build.trout.prop, or will it work on its on?
nick8197 said:
Im on a dream/g1
Im using dwang with theme
do you think it will work I havent done it yet
Click to expand...
Click to collapse
i do believe so...
the only way it won't is if i mis-edited the build.trout.prop
but we'll know in a bit!!
alexjzim said:
will test as soon as my slow internet loads
how exactly does this one work? meaning what exactly does it change? does it still affect the build.prop and build.trout.prop, or will it work on its on?
Click to expand...
Click to collapse
unfortunatley yes, it still edits the buildprops and what not....
it should work on anything 1.6+ by anyone.....
i think
theomajigga said:
unfortunatley yes, it still edits the buildprops and what not....
it should work on anything 1.6+ by anyone.....
i think
Click to expand...
Click to collapse
i tried one...not this one.. but what happen is that handcent dosent locate contacts.. due to those builds being moved..and handcent is a popular sms app so im waiting for someone to flash this then run handcent!
mrnv45 said:
i tried one...not this one.. but what happen is that handcent dosent locate contacts.. due to those builds being moved..and handcent is a popular sms app so im waiting for someone to flash this then run handcent!
Click to expand...
Click to collapse
I'm going to look into that becuase i use handcent also...
this is just for the community, and me once i get that build stuf figured out...
just downloaded and am about to try it now. Nav was running great till i updated to 4.2.4. figure it reinstalled the build.prop. give me a sec and will let you know
theomajigga said:
unfortunatley yes, it still edits the buildprops and what not....
it should work on anything 1.6+ by anyone.....
i think
Click to expand...
Click to collapse
alright. i just wanted to see if we could have gotten that nice looking facebook app working alongside this. got a couple ideas.., give it a try when im done with my honors stuff. pretty behind. staying on XDA all night
mrnv45 said:
i tried one...not this one.. but what happen is that handcent dosent locate contacts.. due to those builds being moved..and handcent is a popular sms app so im waiting for someone to flash this then run handcent!
Click to expand...
Click to collapse
I had the exact same problem, I just pushed the old build.prop and build.trout.prop back to my phone and reboot and now handcent shows the right info and navigate is still there. Here's to hoping it stays!
waygeekierthanu said:
I had the exact same problem, I just pushed the old build.prop and build.trout.prop back to my phone and reboot and now handcent shows the right info and navigate is still there. Here's to hoping it stays!
Click to expand...
Click to collapse
rumor has it that nav will disappear though with the old buildprops back on...
P.S @ 50 download i'm cutting it off, want to make sure its working properly,
after some feedback i'll put it back up!
theomajigga
any lucc on the handcent?
Soo by putting this on my phone, will it mess up my handcent?
mrnv45 said:
theomajigga
any lucc on the handcent?
Click to expand...
Click to collapse
working on it now
alright i see the prob i think. as far as build props anyway. the only thing that needs to be changed is this line
ro.build.fingerprint=verizon/voles/sholes/sholes:2.0/ESD20/17572:user/ota-rel-keys,release-keys
the rest can stay the same.
this should play nice with other apps, and allow the new facebook as well.
edit: in this line would need to be modded in build.trout.prop for the dream and build.sapphire.prop for the sapphire
also note that you can mod the line in both and leave them in the update. cyan's roms use all 3 build props. but reads from the trout or sapphire depending on which phone it is installed on, since his roms can work on both.
working great on my wifes G1
followinginsanity said:
alright i see the prob i think. as far as build props anyway. the only thing that needs to be changed is this line
ro.build.fingerprint=verizon/voles/sholes/sholes:2.0/ESD20/17572:user/ota-rel-keys,release-keys
the rest can stay the same.
this should play nice with other apps, and allow the new facebook as well.
Click to expand...
Click to collapse
Made the change to the file. waiting for my test...
theomajigga said:
Made the change to the file. waiting for my test...
Click to expand...
Click to collapse
as soon as i get a confirmation that running this keeps handcent up lol you will become god lol..
[ROM][BETA] Eclr0.2.1b "Bishop" - 2.0 with gapps + semi-working sync ~TESTING ONLY~
Release 0.2b "Bishop", it`s more trustworthy than Ash but still an ugly old coot.
Release Name: Eclr-gZ
Release Version: 0.2b "Bishop"
MD5 Sum: 2606f60d040840316686bac58ac1a271
Credits: Me
Base Firmware: 2.0
Radio Required: 2.22.19.26I
SPL Required: 1.33.2005
Partition Layout: FAT/Ext3/Linux-Swap
Wipe Required: Yes
Special instructions: Disable sync & refresh gmail manually.
Download: http://www.androidspin.com/downloads.php?dir=goldenarmz/APPS/&file=Eclr.0.2.1b-Bishop.gZ.zip
**IMPORTANT: Automatic sync gets stuck in a loop. Contacts and emails will sync on first boot, but for now you'll have to disable autosync and periodically do it manually to get your emails through. If you can't tolerate that, DON'T FLASH THIS ROM!**
Sync service seems to trip up over a new sync adapter that wasn't in 1.6 - "subscribedfeeds - com.google". It will constantly retry this adapter and ignore all others. I've messed about with swapping in the subscribedfeeds apk from 1.6, this fixed the problem but caused FCs with the calendar and gapps.. a better solution is needed. Manual sync using the dev tools works fine, but it keeps falling back into a loop with this other adapter and I don't know how to stop it... let's see if any of you can come up with anything 8)
Aside from this rather large problem, all google apps are working with no force closes as yet.
NOTES:
Requires the standard 3 partition setup, fat, ext, swap and the deathspl. G1/Dream/ADP1 only.
My update script will erase userdata.. it's easier that way until the rom is stable.
First boot has been cleaned up. Sign-in works normally, but the phone will take a few minutes after boot to settle down and get up to speed. There is still a force close from LatinIME on boot sometimes.. not figured that one out yet.
FEATURES:
root
a2sd (working now, tested on ext3. wipe your ext to be sure)
linux-swap
wifi
bt
gapps
sync (sort of)
added wallpaper set & save app
facebook app from sholes dump
build.prop hack for navigation
NOT WORKING:
Accelerometer
Camera
STILL TO DO:
fix sync
optimization
theme
THANKS TO:
Joushou, maxisma, B-man007, Cyanogen, dwang, jubeh, enomther and anyone else I might have forgotten.. either for direct help, or for the things I've learnt from dissecting their work
DOWNLOAD: - MD5: 2606f60d040840316686bac58ac1a271
http://sharebee.com/bd656825
http://www.androidspin.com/downloads.php?dir=goldenarmz/APPS/&file=Eclr.0.2.1b-Bishop.gZ.zip
which ext's are needed?
nice
Can't wait to download and try. Remove. Pervisoning.apk it is replaced by setupwizard. That will stop the choice at start. What base ron did you use and what set iof apps.
File Corrupt in Download
Hey man, I've downloaded it twice, and so far the .zip been corrupt both times.
error
I get an error during the install
"E: Corrupt file: system/framework/ext.jar"
"E:Verification failed"
"install aborted"
It took me 20 minutes to download this, did a complete wipe of everything.
E: Corrupt file:
System/framework/ext.jar
E: Verification failed
Installation aborted.
I also tried to extract the downloadable zip
1 CRC failed in "system\framework\ext.jar". File is broken
Gah.. I hate these filehosting sites. Sorry about that.. Will re-up soon.
Same ERROR!...
New link up.. it's rapidshare though.. only 10 downloads. Can anyone offer me any REAL hosting?
goldenarmZ said:
DOWNLOAD:
http://rs286.rapidshare.com/files/310690177/Eclr.0.1b-Ash.gZ.zip
Click to expand...
Click to collapse
You can only download this file by becoming a premium member - aka the file size is too large for standard users to download.
twistedumbrella said:
You can only download this file by becoming a premium member - aka the file size is too large for standard users to download.
Click to expand...
Click to collapse
It's just because its busy atm.. Added another link and MD5
barakinflorida said:
Remove. Pervisoning.apk it is replaced by setupwizard. That will stop the choice at start. What base ron did you use and what set iof apps.
Click to expand...
Click to collapse
Thanks.. I'm not going to put another version up yet since this is just for testing anyway, but thanks.
There's no base rom, built from AOSP-Master branch.. google apps are from the milestone sholes dump.
Direct Link : http://shoobee.eu/android/Eclr.0.1b-Ash.gZ.zip
vache said:
Direct Link : http://shoobee.eu/android/Eclr.0.1b-Ash.gZ.zip
Click to expand...
Click to collapse
Thank you, much appreciated.
working with this now. Looks good!
Thanks!
Thanks good, work fine on my magic 32B . wifi dont work, anyone can tel me how to make it work.
thx
Working fine, wifi too, sync don't works first time reboot and all is good.
I 'll try exchange now ..
co2gaz said:
Thanks good, work fine on my magic 32B . wifi dont work, anyone can tel me how to make it work.
thx
Click to expand...
Click to collapse
Cool, I'll try flashing this on my MT3G.
goldenarmZ said:
New link up.. it's rapidshare though.. only 10 downloads. Can anyone offer me any REAL hosting?
Click to expand...
Click to collapse
try sharebee.com next time .. don't need a membership and it contains links to like 5 different dl sites
tested on 32a with xRom 32A kernel by eug89...
Wifi, BT and GPS seem work..
sync also work for contacts and mail..multiple google account also work..no FC so far..
but like TS has been mention before after everything setup the sync seem not working anymore..it seems just stuck on sync (sync icon always comes out in status bar)..mail is not coming and new contacts didnot sync, if i disable sync in setting then reenable it sync will work but after that it stuck again..son the syncronisation just work for the first time..
thanks for the great work..waiting sync fix..
Android 2.0.1-r5v0.6
Dead:
==============
After spending some time and looking over this rom and ways to make it work with out any legal issues. The most viable option was to build something like what cynanogen has built. His process takes the proprietary bits (all google apps including sync) and copies them off onto the SD card before doing a update. After the update it copies them back to the newly installed rom. This method basically does a automated backup/restore of your licensed applications. I can't do this for several reasons including that we are supposed to be coming from a 1.5 OS to a 2.0.1, which isn't compatible with the older application set.
Temporarily Offline:
==============
I am sorry to have to do this but we are now having more then just a small handful goofing with this ROM and I need to take this offline while I inspect each of the parts and make sure all licensing is in order since its a bit more then the google Opensource framework. I know that several other ROM creators have not paid much attention to it as I am going to now but I really don't want to upset any IP holders like what happened to Cynanogen a couple months back.
I will put it back up but I want to make sure that I am totally covered and don't have any issues.
version 0.6: download (offline)
==============
-fixed wifi thanks to http://forum.xda-developers.com/showthread.php?t=593620
-Now starts up with Android stock keyboard. (No longer needs HTC_IME.apk for second keyboard)
A few have asked for this ROM so I thought I would put it up here for anyone that wants to contribute to or take from it.
This ROM is only compatible with the Sprint CDMA HTC Hero. It is not finished and still requires some work but its good enough for my day to day use and I am sure others may find the same potential.
This ROM is vanilla android and what it takes to actually get it running on a CDMA phone. It is built off of this GSM variant. I am going to try and work to remove the google bits so that you can use Cynanogens method of extracting your own and then doing a follow up update to install them. My efforts for this is not to build a better rom but to build a cleaner base that has limited to no proprietary IP.
Credits to all on this forum how have helped or contributed in any way to building the roms that are here. I would point out names but there are to many to name. I am positive that anyone that pays attention to this forum will know who you are. I used many parts of these ROM's and many others on XDA to build this one.
This is my first ROM and was primarily made for myself to help me learn how to create a custom ROM.
Here is the link to my blog where I originally posted about this and a video of it booting.
Here is the Youtube video of it booting: http://www.youtube.com/watch?v=tRTh-rXKe-E
*Warning*: Don't attempt to flash this ROM onto anything else unless you know what you are doing! I am not responsible for any device malfunctions or "Bricks".
Notes on Installing:
- Run a Nandroid backup before you do anything.
- Make sure you do a full wipe first. (Sorry )
- Run the update zip found * Version 0.6 *(offline) from the recovery console.
To get the HTC keyboard installed: (Now Optional as of Version 0.6)
- Follow the instructions here.
Things that don't work:
- Gallery some times has issues.
- Camera
- Wired or Wireless Tethering (Now Testing)
- Orientation
- Trackball light
- Trackball click (Rolling and moving are fine)
- (Let me know if something else needs to go here.)
Possible issues that are not repeatable:
- speaker not working on out bound calls? I made 30 test calls to my home phone and was not able to replicate this issue. Needs to be verified (see here)
Awesome! Thanks! disregard my PM lol.. Great timing.
VoXHTC said:
Awesome! Thanks! disregard my PM lol.. Great timing.
Click to expand...
Click to collapse
LOL I was just getting to replying to you!
im trying it now nice work
Let me know if any of you have issues flashing. I still have it all right here in front of me if I need to make a change.
FYI: The first boot takes for ever as it registers all the APKS.
i just get the HTC_IME fource close i installed the one from the site like you said and installed it and i get this
thorracing1 said:
i just get the HTC_IME fource close i installed the one from the site like you said and installed it and i get this
Click to expand...
Click to collapse
So you installed both the HTC_IME.apk and the Clicker.apk? Did you do a adb push or a adb install?
Try and go into settings --> Language & Keyboard --> Touch Input --> Text Input?
I think its a force of habit with out really thinking to go there and calibrate but just going there may help.
Try that and let me know.
i just flashed it and pushed the keyboard and calibration app through adb and all is well. its working awesome. Thanks!!!
2.0t03speed said:
i just flashed it and pushed the keyboard and calibration app through adb and all is well. its working awesome. Thanks!!!
Click to expand...
Click to collapse
Awesome, keep the feed back coming as you have it!
please take note orientation doesnt work. please put in first post.
otherwise, great work!
should i do adb install or adb push?
blankd3ckskat3r said:
please take note orientation doesnt work. please put in first post.
otherwise, great work!
Click to expand...
Click to collapse
Got it listed now, that one bugs me... Must have been to worried about building this to remember it.
BTW thanks for the feed back!
thorracing1 said:
should i do adb install or adb push?
Click to expand...
Click to collapse
I would do an install or transfer them to your SD card and grab a app like Astro from the market to install them. Don't worry we will get you worked out.
dchadwick said:
Got it listed now, that one bugs me... Must have been to worried about building this to remember it.
Click to expand...
Click to collapse
lol well its a common problem, cant wait for a fix. really like what you did with this build
dchadwick said:
I would do an install or transfer them to your SD card and grab a app like Astro from the market to install them. Don't worry we will get you worked out.
Click to expand...
Click to collapse
Not able to get a working Keyboard Now I'm stuck in a boot loop. Tried installing through droid explorer.. no go.. tried installing from astro ..no go.. now it loads lockscreen.. dead... reboot..rinse and repeat
removed SDcard.. boots now trying to push.. but where do I push the apk files to?
blankd3ckskat3r said:
lol well its a common problem, cant wait for a fix. really like what you did with this build
Click to expand...
Click to collapse
Thanks, but I really can't take to much credit. Its a "Pick and Pull" from several ROMs. This one actually came from our GSM Brothers and then I used the CDMA tricks in this form to make it work.
I keep watching and playing with the Google Nexus Dumps. I would really like to get one of them up and running.
Based on your posting and replies I assume you are re-using the 2.6.27 kernel like the other roms?
VoXHTC said:
Not able to get a working Keyboard Now I'm stuck in a boot loop. Tried installing through droid explorer.. no go.. tried installing from astro ..no go.. now it loads lockscreen.. dead... reboot..rinse and repeat
Click to expand...
Click to collapse
Wow thats allot in a little space.
What I gather is that it originally booted, then after trying to install via droid explorer and then astro it now just dies after the lockscreen.
I am not sure where to start. I would just say to do a full wipe, then a clean install. Then if you have the sdk try the ADB install method as Cynanogen's post talks about.
I am working on trying to get the stock Android keyboard to work. If we can figure out that then we don't have to mess with the HTC one.
ok i got it i just adb pushed them to system/app works great
obelisk79 said:
Based on your posting and replies I assume you are re-using the 2.6.27 kernel like the other roms?
Click to expand...
Click to collapse
Yeah, actually some of your work if I remember correctly, thats why its got the same issues. My first goal when I built this for my self was to get past the blasted google bits sync loop. The more I worked into it the more I moved on to the 2.0.1 build with some of your stuff in it.
Your welcome to anything I have learned, its really not my work.
Welcome to Androot-N7p-ROM for the NextBook 7 Premium *ONLY.
I decided to change up some of the apps and generalize the rom in terms of its boot-animation screen. It runs on LauncherPro (just choose it as the "always"/default upon first instance of it. The Launcher that comes with the device isn't so great, but I left it there just in case.
It's based on the first known rooted ROM for this device: 'DocHoppy's ROM'. Credit for most of this ROM goes to him and to 'Wendal' for his toolset for packing the ROM (into cramfs) for the Nextbook 7 Premium device.
As such, it is a beta/ work-in-progress.
Androot-N7p-ROM v0.2
[ 146 MB ]
download here
Instructions:
*WARNING: FLASHING THIS DEVICE WILL ERASE YOUR DATA AND APPS!!!!*
Download image.
Rename file to update.img
copy file to root of SD card.
Follow on screen prompt asking if you want to run update image.
Disclaimer:
I am not responsible for bricked devices.
Here's my changes..
removed:
-youtube player <- the real youtube app is better
-explorer <- redundant
-slide me app market <- redundant now that Google's Market is installed
-quick search box <- Google Search widget is better IMO
kept/added:
-Market <- the real Google one
-root explorer - an alternative & capable file explorer
-astro file manager <- we all know it well
-quickpic 1.5.2 - a much lighter & more efficient photo organizer/viewer
-3D gallery <- some love it, some hate it
-brightness level 1.0.0 - quicker brightness changes
-ConnectBot 1.6.2 <- for those that need a SSH tool
-Officesuite full <- may as well keep it
-Titanium Backup 4.6.7 <- has some very handy tools aside from backups
-LauncherPro 0.8.6 <- may be old, but it's smooth and capable
-superuser <- because this rom is rooted
-has some of the Google Apps (go ahead and add as you see fit)
-has a custom boot animation.
Click to expand...
Click to collapse
Known Issue:
Apps2sd reports SU Binary out of date. Attemps to update this via superuser fails due to cramfs file system.
It's not perfect, but it does work well and I run it as my daily driver on my N7P.
Please give feedback or suggestions! I trust the pro devs could easily help me out with the little things!
-------------------
here are other threads related to the Nextbook 7
http://forum.xda-developers.com/showthread.php?t=1410862 (dochoppy's rom)
http://forum.xda-developers.com/showthread.php?t=1190990 (rooting talk? )
Since I'm new to modifying/cooking ROMs, here's my
Questions I have for the devs that cook ROMs all the time...
(lol)
Where do I edit the items that show in 'settings > about' in the device?
How do I change the default shortcuts that LauncherPro puts on the dock?
How do I change what icons are default on the home screen?
Where do I put custom wallpapers as part of the rom?
How do I modify Android UI colours?
Can the dialer be removes without losing "contacts"?
How do I create a shortcut to "contacts" without the phone/dialer?
(more to come I'm sure)
Hello, first of all, thanks for your work!
I am having trouble loading this rom. it says there's an invalid image file in my sd card and if I want to delete.
Now, I don't know if my tablet is a never or older version of what you guys have...
Next7p
2.3.1
kernel: 2.6.32.27
build: v2.0.7.....
my serial is also different from alot..it starts with YF0511
any help or tips?
In Dochoppy's original rom/post he mentions that the device will need to have a serial number starting with YF1011. That stands the same for this rom, as it's derived from his.
Having an invalid update.img firmware file could be due to a number of things, but the one I have here works on my device.
I wish I had more of an answer, but by all means try out the tools for repacking the rom.
So after messing around compiling a ROM, I forgot to add a launcher, and now I am stuck in a bootloop. After the girl in the dress is there for awhile, I get a black screen, then reboot. Anyone now how to fix this? I have been searching Google, but can not find anything yet.
Any help would be great!
xxProphecyxx said:
So after messing around compiling a ROM, I forgot to add a launcher, and now I am stuck in a bootloop. After the girl in the dress is there for awhile, I get a black screen, then reboot. Anyone now how to fix this? I have been searching Google, but can not find anything yet.
Any help would be great!
Click to expand...
Click to collapse
I had mine half dead for a short bit until i found i could go into a low level bootloader mode and recover it. I am working on getting a the tool/images i used to recover mine uploaded and such.
Download and extract n7p_rescue_kit.zip
Reboot device using paper clip then quickly press and hold reset until you get black screen with usb plugged in
When windows wants driver give it the respective folder for your os (32bit or 64bit) from Drivers folder from the download
Run RK29update.exe if it says "Found RKAndroid Loader Rock Usb" on bottom you are good but if it shows "No Found RKAndroid rock usb" repeat last step.
Either flash all of the default selected items or do just system (since bootloop is in system)
Hope this helps
P.S. If you pack then unpack your custom one you can flash JUST system using the tool but be sure to use the offsets that are pre-loaded.
use a pin to push the reset button on the back to break out of the boot loop.
If after this your rom still bootloops, try putting a different update.img rom to flash, on to the sd card. Then boot into safe mode by holding all 4 front buttons after boot. the update should be found and installed after that.
Thanks!
I registered just to thank DocHoppy for all his efforts. I have a Nextbook Premium 7 I got for Christmas from Hastings, which fell into the YF09111XXXX batch. I used Wendal Chen's RK29xxImageTools_v2.1 to unpack the firmware upgrade from the nextbookusa site. I then put the Google apks, SuperUser, Rootexplorer, and re-packed it with a custom bootanimation. Because of my serial # I couldn't use DocHoppy rom without getting that "Invalid Update" error, but using their firmware seems to work.
My next goal is to find a way to get the "Accounts & Sync" into the settings! One of my apps is getting an "Error 42" which is an Android Market authentication error... however, other apps have worked without any problems so it's difficult to tell if that's the issue I'm having.
aberrantjots said:
I registered just to thank DocHoppy for all his efforts. I have a Nextbook Premium 7 I got for Christmas from Hastings, which fell into the YF09111XXXX batch. I used Wendal Chen's RK29xxImageTools_v2.1 to unpack the firmware upgrade from the nextbookusa site. I then put the Google apks, SuperUser, Rootexplorer, and re-packed it with a custom bootanimation. Because of my serial # I couldn't use DocHoppy rom without getting that "Invalid Update" error, but using their firmware seems to work.
My next goal is to find a way to get the "Accounts & Sync" into the settings! One of my apps is getting an "Error 42" which is an Android Market authentication error... however, other apps have worked without any problems so it's difficult to tell if that's the issue I'm having.
Click to expand...
Click to collapse
Install "Quick Sync Settings" to get to the hidden settings view.
Also did you use this guide for market? That one worked great for me.
Thanks
Working great for me so far. Thanks sharing your work.
Nice!!!
I have the image as well... Can you tell me how to open it or point me in the direction of a tutorial? I've been looking for weeks and couldnt find any info until this thread I have a yf091... as well. Thanks in advance for any help.
lost enigma 208 said:
I have the image as well... Can you tell me how to open it or point me in the direction of a tutorial? I've been looking for weeks and couldnt find any info until this thread I have a yf091... as well. Thanks in advance for any help.
Click to expand...
Click to collapse
Not sure if this rom will work for you, just guessing by your serial number. If it is to work changing between roms on these tablets is very easy. Just download the image onto the root of your sdcard, rename it update.zip (not update.zip.zip) your tablet will recognize it as an update and ask if you want to proceed. If you say yes then follow the prompts and your in business!
Sent from my NXM726HN using XDA App
Just go this to day and was plesantly suprised to find this rooted rom. Just wanted toy let you know that my S/N is YF12112xxxx and this rom work prefect for me (so far) Thanks for all the work you guys have done here. Also is there anyway to over clock the processor in out tabs?
Thanks for the comments thus far!
I would like to overclock this thing too, but that might be further down the road, as priority is on getting a different file-system for the /system volume.
Version 0.4 is coming next.
FYI:
There will be a larger span of time between updates on this particular rom for the N7p, because I will be using more stable conjumbles of things from other roms for this device. This rom is more of a remix or derivative than an entirely different rom.
Again thanks for all the hard work. I have a few requests. first since we cant change the Adhoc ( using wifi from another android device) on the fly with out RW access can you please add the ability to connect to adhoc wifi in the next build? Also i love google currents app but we cant use is on our device because we don't have map's installed. can that be added as well?
fireproof34 said:
Again thanks for all the hard work. I have a few requests. first since we cant change the Adhoc ( using wifi from another android device) on the fly with out RW access can you please add the ability to connect to adhoc wifi in the next build? Also i love google currents app but we cant use is on our device because we don't have map's installed. can that be added as well?
Click to expand...
Click to collapse
Most of the N7P roms out there now have Market installed and working. Why not just install these apps yourself?
I only suggest so because for the time being, the device is limited to its minimal capacity for apps without full-on apps2SD. Besides, for a tablet like this, you want to keep the system apps to a minimum and de-bloated for performance whenever possible.
sgtfoo said:
Most of the N7P roms out there now have Market installed and working. Why not just install these apps yourself?
I only suggest so because for the time being, the device is limited to its minimal capacity for apps without full-on apps2SD. Besides, for a tablet like this, you want to keep the system apps to a minimum and de-bloated for performance whenever possible.
Click to expand...
Click to collapse
As far air know they can not be installed with out write access. I f they can please let me know how and I will be more then ecstatic to get them both installed.thanks.
Sent from my NXM726HN using XDA App
fireproof34 said:
As far air know they can not be installed with out write access. I f they can please let me know how and I will be more then ecstatic to get them both installed.thanks.
Sent from my NXM726HN using XDA App
Click to expand...
Click to collapse
Oh I was talking about currents and maps. Both of those can be installed via market. I have them both on my tablet.
The ad-hoc networking is something worth putting in a later release though.
good mention.
Runs great
Works great on my
NextBook Premium 7
Serial: YF121121263
Manufactured: Dec 2011
I just joined and know very little about tablets
but this image is better than the rest. I'm 63 retired and would like to learn how to do what you do.
Again, thanks for your hard work.
lrmahon
Welcome. Lots of searching and trial and error ,but this is a great place to start!
lrmahon said:
Works great on my
NextBook Premium 7
Serial: YF121121263
Manufactured: Dec 2011
I just joined and know very little about tablets
but this image is better than the rest. I'm 63 retired and would like to learn how to do what you do.
Again, thanks for your hard work.
lrmahon
Click to expand...
Click to collapse
Sent from my NXM726HN using XDA App