Database Info

Android for Kaiser with Wifi [Beta][Package]

UPDATE 08/26/09
http://www.scarlet-arrow.com/index.php?page=08-26-09---wifi-dma
DISCLAIMER
WARNING: This is given to you with the understanding that I nor the developers will be held responsible for any damage done to your phone while using Android.
Thank you for downloading this pre-packaged Android setup.
This is offered for free and I claim no ownership or rights. I am simply making it easier for you. All credit goes to the hard workers of the Android Vogue(Vogue Linux) project and XDA-Developers forums.
All the developers of the Android Project
Reference sites:
http://code.google.com/p/vogue-android/
http://code.google.com/p/vogue-hero/
Click to expand...
Click to collapse
READ ME
http://scarlet-arrow.com
This package is provided by: Natalic
08/26/09
---------------------------------------------------------------
THIS IS A DMA WIFI HERO BUILD:
Thanks goto addisu and dzo for getting a working Wifi module and all the hard working developers who get Android ported to the various devices.
Thanks to JAC for making the base rom (JACHeroski1.6)
This pack was tested and worked before uploading!
Directions:
0) If you have a data.img delete it first!
1) Copy all files from "Required" to the root of your memory card. I recommend at-least a 512mb.
2) Launch haret and click "Run"
2.1) You will need to wait for the data.img (data store) to be created, this takes around 2 minutes. This stores your files.
3) It takes sometime to get to the setup screen. If the screen turns off, just turn it back on. It will come up.
4) Go through the intro of Android (you only do this once)
The first 3 steps get you into Android
The following gets you Wifi (Kaiser/Tilt only)
* In this build, you can now select your WiFi in the setup.
In side Android:
1) Bring the menu up
2) Goto settings
3) Go to Settings -> Wireless Controls then click "Wi-fi" wait until there is a check
4) Select your network under Wi-Fi Settings
6) Make sure you save your "calibration" file and keep a copy of it save so you can just move it to future builds.
House cleaning:
I did not develop any of this kit, I simply put the pieces together and made them available in an easy to use package.
If you need any help please leave a comment in the forum!
To setup APN you must configure it, this can be found on the Android Vogue Wiki( http://code.google.com/p/vogue-android/wikii/HowToInstall )
Click to expand...
Click to collapse

Reserved
This is reserved.

Do we really need another thread for this? Why can't we just get Newbie to clean up his first post in the other thread? Seems kinda redundant...

loserskater said:
Do we really need another thread for this? Why can't we just get Newbie to clean up his first post in the other thread? Seems kinda redundant...
Click to expand...
Click to collapse
Well, the previous one is not for strictly a build, its more for the wikis and stuff. This thread is strictly for downloading a complete package.

cool, I'll bite!
Trying to follow the steps when i type "su"
i get "uid 10027 not allowed to su" , I did a search for this phrase and the only hit i got was the same error, but person asking was ignored.
Any ideas on how to get around this?
I'm running on a Tilt.
Thanks !!

Excellent, any mirror not from rapid or mega?, my network has the storage web filter , a FTP mirror will be great!
Thanks in advance,

natalic said:
This is reserved.
Click to expand...
Click to collapse
So the hero zip file is a rom? and if so can you flash it to a kaiser ?

keep it up...
if its like HTC HERO, it would be nice

Thanks natalic, it works.
Some additional points:
1) Ensure you're getting the file from the rapidshare link. I tried the latest build from the project site (android-1.5-2009-08-04.zip) and I never managed to extract the calibration file
2) There's a hero build here (http://drop.io/calibrationfiles) but I would suggest to get the calibration file out 1st before trying the hero build. It seems that you wont be able to access the terminal easily from Hero builds... (Maybe it's just me)
What works and not in the Android build (non-hero):-
1) Browser works
2) Market works
3) Google Sync works
4) Google maps does not work

loserskater said:
Do we really need another thread for this? Why can't we just get Newbie to clean up his first post in the other thread? Seems kinda redundant...
Click to expand...
Click to collapse
yes it is, android is starting to need a forum all to itself, or you can look at it like this if the android threads are builds from diff "android chefs" then it would be no different than multiple rom threads for diff chefs or diff wm versions.

Heres my working repack. Enjoy
http://www.mediafire.com/?k13tnjton22

Wifi is working great, Tested on an AT&T tilt with no SIM card inserted. Was able to connect to the internet, download from the market, etc.

How do I get SIM to work and get the phone signal?

shadowline said:
Wifi is working great, Tested on an AT&T tilt with no SIM card inserted. Was able to connect to the internet, download from the market, etc.
Click to expand...
Click to collapse
How did you download from market!? It just hangs on "Starting download" for me. Meh!
*Works. Just had to reboot *

TheParadox said:
How did you download from market!? It just hangs on "Starting download" for me. Meh!
*Works. Just had to reboot *
Click to expand...
Click to collapse
Same goes here.
I am now using HERO UI with a calibration file extracted from the standard build. Apps are not being downloaded... Google maps also not working... (Always Force Close)
Paradox: You forgot to mention about rebooting the phone after running getrom.txt as per your instruction in the zip file.

MOUSEY said:
Same goes here.
I am now using HERO UI with a calibration file extracted from the standard build. Apps are not being downloaded... Google maps also not working... (Always Force Close)
Paradox: You forgot to mention about rebooting the phone after running getrom.txt as per your instruction in the zip file.
Click to expand...
Click to collapse
Sorry mate.

MOUSEY said:
Same goes here.
I am now using HERO UI with a calibration file extracted from the standard build. Apps are not being downloaded... Google maps also not working... (Always Force Close)
Paradox: You forgot to mention about rebooting the phone after running getrom.txt as per your instruction in the zip file.
Click to expand...
Click to collapse
I thought the wifi was cooked into the system file? How do you do that?

MOUSEY said:
Same goes here.
I am now using HERO UI with a calibration file extracted from the standard build. Apps are not being downloaded... Google maps also not working... (Always Force Close)
Paradox: You forgot to mention about rebooting the phone after running getrom.txt as per your instruction in the zip file.
Click to expand...
Click to collapse
Is it reasonably responsive on your kaiser? I tried one build of it today, and it was awful. I mean all the features are cool, but no amount of features can replace responsivness...

MOUSEY said:
Same goes here.
I am now using HERO UI with a calibration file extracted from the standard build. Apps are not being downloaded... Google maps also not working... (Always Force Close)
Paradox: You forgot to mention about rebooting the phone after running getrom.txt as per your instruction in the zip file.
Click to expand...
Click to collapse
Can we see any screenshots of this or can you run such a screenshot program on android?

xxbabiboi228xx said:
Can we see any screenshots of this or can you run such a screenshot program on android?
Click to expand...
Click to collapse
The Hero UI works. Its just not that fast. I can vouch for that. I dont know how he has wifi working on it. I could have sworn the driver had to be cooked into the system.img

[ROM] Navigation add-on for any 1.6 Rom! Market fixed!! 11/19/09!!

!!THIS NAVIGATION IS !!ONLY!! FOR THE USA!!
!!Paid apps work!!
Facebook has now been removed!!​
Release Name:update_navigation.zip
Release Version:FINAL
MD5 Sum:N/A (verified working)
Credits:See below
Base Firmware:1.6
Radio Required:N/A
SPL Required:N/A
Partition Layout:N/A
Wipe Required:N
Special instructions:See below
Download:See attachment or, 4shared link
Hey guys,
After a longs day of work, I got it.
Put together a recovery flash-able zip file to add the new Google navigation.
REQS:
1. Dream or Sapphire/Magic/Mt3G
2. 1.6 Rom as a minimum
3. Custom recovery either Amon's or Cyanogen's
4. A brain
5. The download at the end of the post
STEPS:
1. Download this for most Donut builds (Cyanogen based). (also attached now )
2. Place in the root of your sdcard
3. Reboot in recovery
3. Select chose update.zip (or rename the downloaded file to update.zip)
4. Select update_navigation.zip
5. Reboot
Extended steps:
If "Navigate" doesn't show up the first time:
1. Go to settings
2. Click on applications
3. Click on Manage applications
4. scroll to apps
5. click on Maps
6. Clear data
OR
1. Install Google Voice
2. Uninstall Google Voice
3. Reinstall Google Voice
****MOST IMPORTANT PART****
Thanks:
Cyanogen and Amon for their recovery images.
followinginsanity for his updates to build props
community for helping test and get it goooinnggggg!!
clyde8 for the better build string
Brut.al for the (possible) navigation out of USA!
Donation shout-outs:
Suma Software Inc
If you actually feel like donating to my trip fund go ahead and click here!!​
!THANKS!
AND ENJOY​
Q&A
Q: Navigation is not showing up!
A: you must first "get directions" for the option to show up, it is in that pane
A: MAKE SURE YOU ENABLE GPS!!!
Q: Why was facebook removed??
A: it caused to many issues, and the market one works fine.
Q: What is the latest changes??
A: I removed the build.prop file completely in hopes that it will work without it, did for me... you tell me
Q: What took so long?!?!
A: I had H1N1, b|0W me.
Q: Does this work with AOSP?
A: doesn't look like it, at least not so far, I did adjust some build props right from them but never got any feedback to let it out to the masses.
Q: Does this break CM-Updater?
A: No, it shouldn't.
Q: Do i need to reflash this every time?
A: if you want navigation, yes. Every update reverts the build props back to the old ones.
Q: Does this work outside of the USA?
A: Yes. BUT BUT BUT BUT BUT BUT BUT BUT BUT YOU MUST FOLLOW THESE DIRECTIONS EXACTLY!
1. First navigate between 2 USA addresses (just enter them in to get the navigate option to show up)
2. Make a shortcut on your home screen with the address you want to navigate to.
3. Make sure turn by turn is checked.
4 click it nub.
5. drive to the location
6. brag "o mai android is wai b3tt3r thian UR ip0ne."
7. hope to god it brings you back home, otherwise buy a map.
If your paid apps are not working, either wait until midnight, for caches to clear, or flash from scratch...
IE: recovery - rooted cyano - Cyano update - navi update
(p.s not responsible if you drive over a bridge following the GPS, that's stupidity)
(p.p.s don't brick your shaz and blame me or anyone else for that matter, you blew it)

Im trying it now will get back to you

nick8197 said:
Im trying it now will get back to you
Click to expand...
Click to collapse
just for s&g are you a dream, and what Cyanogen are you running...
just want to get as much info as possible

Im on a dream/g1
Im using dwang with theme
do you think it will work I havent done it yet

will test as soon as my slow internet loads
how exactly does this one work? meaning what exactly does it change? does it still affect the build.prop and build.trout.prop, or will it work on its on?

nick8197 said:
Im on a dream/g1
Im using dwang with theme
do you think it will work I havent done it yet
Click to expand...
Click to collapse
i do believe so...
the only way it won't is if i mis-edited the build.trout.prop
but we'll know in a bit!!

alexjzim said:
will test as soon as my slow internet loads
how exactly does this one work? meaning what exactly does it change? does it still affect the build.prop and build.trout.prop, or will it work on its on?
Click to expand...
Click to collapse
unfortunatley yes, it still edits the buildprops and what not....
it should work on anything 1.6+ by anyone.....
i think

theomajigga said:
unfortunatley yes, it still edits the buildprops and what not....
it should work on anything 1.6+ by anyone.....
i think
Click to expand...
Click to collapse
i tried one...not this one.. but what happen is that handcent dosent locate contacts.. due to those builds being moved..and handcent is a popular sms app so im waiting for someone to flash this then run handcent!

mrnv45 said:
i tried one...not this one.. but what happen is that handcent dosent locate contacts.. due to those builds being moved..and handcent is a popular sms app so im waiting for someone to flash this then run handcent!
Click to expand...
Click to collapse
I'm going to look into that becuase i use handcent also...
this is just for the community, and me once i get that build stuf figured out...

just downloaded and am about to try it now. Nav was running great till i updated to 4.2.4. figure it reinstalled the build.prop. give me a sec and will let you know

theomajigga said:
unfortunatley yes, it still edits the buildprops and what not....
it should work on anything 1.6+ by anyone.....
i think
Click to expand...
Click to collapse
alright. i just wanted to see if we could have gotten that nice looking facebook app working alongside this. got a couple ideas.., give it a try when im done with my honors stuff. pretty behind. staying on XDA all night

mrnv45 said:
i tried one...not this one.. but what happen is that handcent dosent locate contacts.. due to those builds being moved..and handcent is a popular sms app so im waiting for someone to flash this then run handcent!
Click to expand...
Click to collapse
I had the exact same problem, I just pushed the old build.prop and build.trout.prop back to my phone and reboot and now handcent shows the right info and navigate is still there. Here's to hoping it stays!

waygeekierthanu said:
I had the exact same problem, I just pushed the old build.prop and build.trout.prop back to my phone and reboot and now handcent shows the right info and navigate is still there. Here's to hoping it stays!
Click to expand...
Click to collapse
rumor has it that nav will disappear though with the old buildprops back on...
P.S @ 50 download i'm cutting it off, want to make sure its working properly,
after some feedback i'll put it back up!

theomajigga
any lucc on the handcent?

Soo by putting this on my phone, will it mess up my handcent?

mrnv45 said:
theomajigga
any lucc on the handcent?
Click to expand...
Click to collapse
working on it now

alright i see the prob i think. as far as build props anyway. the only thing that needs to be changed is this line
ro.build.fingerprint=verizon/voles/sholes/sholes:2.0/ESD20/17572:user/ota-rel-keys,release-keys
the rest can stay the same.
this should play nice with other apps, and allow the new facebook as well.
edit: in this line would need to be modded in build.trout.prop for the dream and build.sapphire.prop for the sapphire
also note that you can mod the line in both and leave them in the update. cyan's roms use all 3 build props. but reads from the trout or sapphire depending on which phone it is installed on, since his roms can work on both.

working great on my wifes G1

followinginsanity said:
alright i see the prob i think. as far as build props anyway. the only thing that needs to be changed is this line
ro.build.fingerprint=verizon/voles/sholes/sholes:2.0/ESD20/17572:user/ota-rel-keys,release-keys
the rest can stay the same.
this should play nice with other apps, and allow the new facebook as well.
Click to expand...
Click to collapse
Made the change to the file. waiting for my test...

theomajigga said:
Made the change to the file. waiting for my test...
Click to expand...
Click to collapse
as soon as i get a confirmation that running this keeps handcent up lol you will become god lol..

[ROM-DEV] Android 2.0.1-r5v0.6 (Dead)

Android 2.0.1-r5v0.6
Dead:
==============
After spending some time and looking over this rom and ways to make it work with out any legal issues. The most viable option was to build something like what cynanogen has built. His process takes the proprietary bits (all google apps including sync) and copies them off onto the SD card before doing a update. After the update it copies them back to the newly installed rom. This method basically does a automated backup/restore of your licensed applications. I can't do this for several reasons including that we are supposed to be coming from a 1.5 OS to a 2.0.1, which isn't compatible with the older application set.
Temporarily Offline:
==============
I am sorry to have to do this but we are now having more then just a small handful goofing with this ROM and I need to take this offline while I inspect each of the parts and make sure all licensing is in order since its a bit more then the google Opensource framework. I know that several other ROM creators have not paid much attention to it as I am going to now but I really don't want to upset any IP holders like what happened to Cynanogen a couple months back.
I will put it back up but I want to make sure that I am totally covered and don't have any issues.
version 0.6: download (offline)
==============
-fixed wifi thanks to http://forum.xda-developers.com/showthread.php?t=593620
-Now starts up with Android stock keyboard. (No longer needs HTC_IME.apk for second keyboard)
A few have asked for this ROM so I thought I would put it up here for anyone that wants to contribute to or take from it.
This ROM is only compatible with the Sprint CDMA HTC Hero. It is not finished and still requires some work but its good enough for my day to day use and I am sure others may find the same potential.
This ROM is vanilla android and what it takes to actually get it running on a CDMA phone. It is built off of this GSM variant. I am going to try and work to remove the google bits so that you can use Cynanogens method of extracting your own and then doing a follow up update to install them. My efforts for this is not to build a better rom but to build a cleaner base that has limited to no proprietary IP.
Credits to all on this forum how have helped or contributed in any way to building the roms that are here. I would point out names but there are to many to name. I am positive that anyone that pays attention to this forum will know who you are. I used many parts of these ROM's and many others on XDA to build this one.
This is my first ROM and was primarily made for myself to help me learn how to create a custom ROM.
Here is the link to my blog where I originally posted about this and a video of it booting.
Here is the Youtube video of it booting: http://www.youtube.com/watch?v=tRTh-rXKe-E
*Warning*: Don't attempt to flash this ROM onto anything else unless you know what you are doing! I am not responsible for any device malfunctions or "Bricks".
Notes on Installing:
- Run a Nandroid backup before you do anything.
- Make sure you do a full wipe first. (Sorry )
- Run the update zip found * Version 0.6 *(offline) from the recovery console.
To get the HTC keyboard installed: (Now Optional as of Version 0.6)
- Follow the instructions here.
Things that don't work:
- Gallery some times has issues.
- Camera
- Wired or Wireless Tethering (Now Testing)
- Orientation
- Trackball light
- Trackball click (Rolling and moving are fine)
- (Let me know if something else needs to go here.)
Possible issues that are not repeatable:
- speaker not working on out bound calls? I made 30 test calls to my home phone and was not able to replicate this issue. Needs to be verified (see here)

Awesome! Thanks! disregard my PM lol.. Great timing.

VoXHTC said:
Awesome! Thanks! disregard my PM lol.. Great timing.
Click to expand...
Click to collapse
LOL I was just getting to replying to you!

im trying it now nice work

Let me know if any of you have issues flashing. I still have it all right here in front of me if I need to make a change.
FYI: The first boot takes for ever as it registers all the APKS.

i just get the HTC_IME fource close i installed the one from the site like you said and installed it and i get this

thorracing1 said:
i just get the HTC_IME fource close i installed the one from the site like you said and installed it and i get this
Click to expand...
Click to collapse
So you installed both the HTC_IME.apk and the Clicker.apk? Did you do a adb push or a adb install?
Try and go into settings --> Language & Keyboard --> Touch Input --> Text Input?
I think its a force of habit with out really thinking to go there and calibrate but just going there may help.
Try that and let me know.

i just flashed it and pushed the keyboard and calibration app through adb and all is well. its working awesome. Thanks!!!

2.0t03speed said:
i just flashed it and pushed the keyboard and calibration app through adb and all is well. its working awesome. Thanks!!!
Click to expand...
Click to collapse
Awesome, keep the feed back coming as you have it!

please take note orientation doesnt work. please put in first post.
otherwise, great work!

should i do adb install or adb push?

blankd3ckskat3r said:
please take note orientation doesnt work. please put in first post.
otherwise, great work!
Click to expand...
Click to collapse
Got it listed now, that one bugs me... Must have been to worried about building this to remember it.
BTW thanks for the feed back!

thorracing1 said:
should i do adb install or adb push?
Click to expand...
Click to collapse
I would do an install or transfer them to your SD card and grab a app like Astro from the market to install them. Don't worry we will get you worked out.

dchadwick said:
Got it listed now, that one bugs me... Must have been to worried about building this to remember it.
Click to expand...
Click to collapse
lol well its a common problem, cant wait for a fix. really like what you did with this build

dchadwick said:
I would do an install or transfer them to your SD card and grab a app like Astro from the market to install them. Don't worry we will get you worked out.
Click to expand...
Click to collapse
Not able to get a working Keyboard Now I'm stuck in a boot loop. Tried installing through droid explorer.. no go.. tried installing from astro ..no go.. now it loads lockscreen.. dead... reboot..rinse and repeat
removed SDcard.. boots now trying to push.. but where do I push the apk files to?

blankd3ckskat3r said:
lol well its a common problem, cant wait for a fix. really like what you did with this build
Click to expand...
Click to collapse
Thanks, but I really can't take to much credit. Its a "Pick and Pull" from several ROMs. This one actually came from our GSM Brothers and then I used the CDMA tricks in this form to make it work.
I keep watching and playing with the Google Nexus Dumps. I would really like to get one of them up and running.

Based on your posting and replies I assume you are re-using the 2.6.27 kernel like the other roms?

VoXHTC said:
Not able to get a working Keyboard Now I'm stuck in a boot loop. Tried installing through droid explorer.. no go.. tried installing from astro ..no go.. now it loads lockscreen.. dead... reboot..rinse and repeat
Click to expand...
Click to collapse
Wow thats allot in a little space.
What I gather is that it originally booted, then after trying to install via droid explorer and then astro it now just dies after the lockscreen.
I am not sure where to start. I would just say to do a full wipe, then a clean install. Then if you have the sdk try the ADB install method as Cynanogen's post talks about.
I am working on trying to get the stock Android keyboard to work. If we can figure out that then we don't have to mess with the HTC one.

ok i got it i just adb pushed them to system/app works great

obelisk79 said:
Based on your posting and replies I assume you are re-using the 2.6.27 kernel like the other roms?
Click to expand...
Click to collapse
Yeah, actually some of your work if I remember correctly, thats why its got the same issues. My first goal when I built this for my self was to get past the blasted google bits sync loop. The more I worked into it the more I moved on to the 2.0.1 build with some of your stuff in it.
Your welcome to anything I have learned, its really not my work.

[ROM] Marlo Bare Bones - CM6RC2 Base 7-27-2010

.: MarloFroyoBareBones :.
Cyanogen 6.0 RC2 - "ReCooked" Bare Bones Edition
Cyanogen's Thread
http://forum.xda-developers.com/showthread.php?t=722801
After ROM install: Available Space 67.74MB
After gApps install: Available Space 56.75MB
**** PLEASE READ EVERYTHING ****
**** I AM NOT RESPONSIBLE ******
Cyanogen's Pre-Req's Remain for this ROM
:::ROM = REMOVED:::
=Bluetooth.apk
=Browser.apk
=Calculator.apk
=Camera.apk
=DeskClock.apk
=Development.apk
=Email.apk
=Gallery3D.apk
=LiveWallpaperPicker.apk
=Music.apk
=PicoTts.apk
=Protips.apk
=RomManager.apk (I prefer AmonRa)
=SoundRecorder.apk
=SpeechRecorder.apk
=Stk.apk
=term.apk
=ttsservice
=voicedialer.apk
=vpnservices.apk
:::ROM = ADDED:::
=Gallery (Legacy Gallery, Not 3d)
=RealCalc (Full service Calc, not the basic one included)
=Cubed - Music Player
:::GAPPS = REMOVED:::
=Amazon MP3
=GenieWidget.apk
=googlevoice.apk
=kickback.apk
=soundback.apk
=talkback.apk
=talk.apk
=VoiceSearch.apk
I made this to my taste,
but thought I would share.
Most people have 3rd Party apps they use.
If options you need were removed,
this ROM may not be for you.
::: SD Setup :::
Swap
Fat
ext - optional - only has Froyo app2sd
::: TO INSTALL :::
- Do whatever you do for backing up, example: nandroid
- Wipe with this method:
---- While USB plugged to the computer,
---- run the bat in this post and format this way:
http://forum.xda-developers.com/showpost.php?p=6855422&postcount=3
---- to ensure full format, I also use AmonRa recovery wipe options
---- just to be safe
---- If you are comfortable in ADB, then just use it to run this command:
adb shell mount -a; rm -rf /system/*; rm -rf /data/*; rm -rf /cache/*;
---- You can skip the bat file if you do this
- Flash ROM ONLY
- Reboot Device
- After that, change whatever settings you would like. DO NOT INSTALL ANYTHING.
- Just Setup CM settings, wifi, etc (optional)
---- I like to enable wifi and put in my network key
---- so my wifi is going when the market begins
---- to sync my apps
- Reboot Recovey
- Flash GAPPS
- Reboot
- Unlock after reboot and you will be prompted with the Google sign in.
---- After unlock, I usually plug it in, have wifi enabled,
---- set it up under 'USB Debugging' to "stay awake when plugged in"
---- and leave it alone for a bit. This way, you aren't stressing out your system
---- while the market is downloading 100 apps at once lol
---- This is also why I reboot and setup PRIOR to installing gapps.
---- A reboot or three may be needed to ensure everything is settled in nicely
---- If you are wondering where your responsiveness is, look at your downloads
---- in the market, see if you are still syncing. If you reboot during some downloads,
---- you may need to cancel and restart them.
Fully Tested on my G1.
Current Phone Specs:
- Danger SPL
- G1-radio-2_22_23_02
- Dithering OFF (CM Options)
- 96mb Swap
- 512mb ext3 - just in case, this way, if I need an ext partition, I dont
-------------- have to re-format the entire card.
I am not responsible for any outcome
due to your use of this ROM in any way.
Use at your own risk.
Credits:
Cyanogen and everyone who built CM6RC2, as I used it as a base.
SpeedTeam : XxKOLOHExX
Relentless ROM Roaster - relentlessappz.com
ROM Kitchen
XDA Community
=========================================================
Marlo's ROM: http://www.mediafire.com/?mx2jmwxlcpemtnv
Marlo's GAPPS: http://www.mediafire.com/?tdwki25qghodu1d

no camera? :/

jewishjawsh said:
no camera? :/
Click to expand...
Click to collapse
Like I said, I use 3rd party apps for that.
I use Camera Zoom FX and mAPPn360

Those apps are much slower than the stock camera app imo. What's wrong with the camera app included in CM6? Snappy for me

jewishjawsh said:
Those apps are much slower than the stock camera app imo. What's wrong with the camera app included in CM6? Snappy for me
Click to expand...
Click to collapse
As I stated:
I made this to my taste,
but thought I would share.
Most people have 3rd Party apps they use.
If options you need were removed,
this ROM may not be for you.
If you want the app that bad, extract it from CM6 and install it on here.
Or, not use this ROM. Simple.

Great work Marlo, nice light ROM. Keep up the great work and I do appreciate your hard work and thanks for sharing your work.

Also appreciate the work on this Marlo!
Flashing now

You should call this No bloat lol

stlouie65 said:
Great work Marlo, nice light ROM. Keep up the great work and I do appreciate your hard work and thanks for sharing your work.
Click to expand...
Click to collapse
RandumAccess said:
Also appreciate the work on this Marlo!
Flashing now
Click to expand...
Click to collapse
Thanks guys. I appreciate your appreciation.
Zei said:
You should call this No bloat lol
Click to expand...
Click to collapse
I was going to leave the "nes" of Bones...
MarLo FroYo BareBo
So far, no hiccups on my end.

Yea great job now i don't have to do all this myself =]
Bloat-Freeeee
stlouie65 said:
Great work Marlo, nice light ROM. Keep up the great work and I do appreciate your hard work and thanks for sharing your work.
Click to expand...
Click to collapse

answr said:
Yea great job now i don't have to do all this myself =]
Bloat-Freeeee
Click to expand...
Click to collapse
I knew I wasn't the only one who didn't want all the other junk!

Hey marlo, I have a problem. I've never modded my g1 before and decided to do this rom first off. I went back and rooted it and then installed amon ra recovery and did radio update to 2.22 and danger spl.
I flashed your rom through recovery and it booted up fine the first three times but for some reason now it wont stop rebooting. It gets to the home screen, "press menu(my bad) 'swipe' to unlock", for about a second or two and then screen fades as if I did a battery pull. Then boots right back up.
I'm going to try some things when i get home, in recovery, when I wipe before install, am I suppossed to wipe all options in that sub menu? Any help would be much appreciated! Thank you and all others in advance.

Alright still having the same problem. I loaded in recovery and wiped everything except the sdcard partition, which I dont have my sdcard partitioned, so I didnt want to do it and wipe my rom zip.
After wiping everything else I reflashed the rom from sd. And rebooted from recovery. Rom loaded up great and worked perfect on first boot for about an hour until I decided to reboot it to make sure everything was working great and it started again.
Will load up to "swipe to unlock" and once its done preparing sd card it fades like I did a batt pull. Help, please?

Ok, sorry I wasn't following forum rules. I didn't know the meaning of the term "search". I spent a good 45 straight minutes searching just now as well as searching earlier today, but you guys are right, it pays off. I had wifi on, and only after a reboot would it go into the wifi reboot bug because on first launch with no wifi on it would connect without rebooting.
Hey marlo, I have some questions about this build and about a stripped down version of android to run games. Answer on here if you like, but I'll PM you about it.

Sorry for the delay. Your bug may have something to do with cyanogen, or what I removed. CM has been known to do similar things.
I never experienced your scenario, but I'm not saying I doubt you.
Games ran fine for me, I played robo defense all the time.
Thanks for trying my version of CM.
Sent from my SGH-T959 using XDA App

I wanted to use my old g1 as just a game machine. Do u think u can cook me a stripped down rom with the best attributes to run games?
Sent from my T-Mobile myTouch 3G Slide using XDA App

Browser
Hi Marlo , was just wondering how i get the browser back as everytime i install the browser.apk from CM6 it force closes. thanks,
appreciate the ROM as well , great job!
Twinny

Great Job
Great job Marlo. I like what you did with the Mod. Without all other stuff on there my battery last longer. Now i can add the .apk that i want.

[GUIDE][Nov.6] CM7 Bible - How-To & Fixes - Radio Bootloop Fix, Browser Fix and MORE!

[GUIDE][Nov.6] CM7 Bible - How-To & Fixes - Radio Bootloop Fix, Browser Fix and MORE!
FIRST POST IS HOW-TO, SECOND POST CONTAINS ALL THE FIXES AND WORKAROUNDS​
GENERAL INFORMATION AND HOW-TO INSTALL / UPDATE CM7​
Alright kids,
We are all very happy that CM7 finally came out to play. And we thank kmobs and the whole CM7 team for all the hard work. They are just... AWESOME!
But while we have that, we also have a lot of people that are either first time android users, or that are just too busy to follow the thread, or just are too lazy (nothing wrong with that, im lazy too )
So here is a guide on how to install CM7, and I will gather all the fixes from the other thread, and will also if I forget something - let me know what I am forgetting and will add it in this thread.
Now here we go:
~~~~~~~~~~~~~I am not to be held responsible if you brick your device following these guides. If you brick it - blame Santa, not me!~~~~~~~~~~~~~~~~~~
INSTALLING CM7​
To install CM7 on your device, you need to first download it from HERE. Once you do that - please follow the next steps:
Code:
1. - Put the ROM on your SD card
2. - Reboot into CWM Recovery
3. - Do a Nandroid backup of your current rom. Just in case.
4. - Wipe Data/Factory Reset
5. - Wipe Cache
6. - Go into Mounts
7. - Format /system
----- I always do that, and dont have a single issue..
8. - Flash your Rom
9. - Go into Advanced, Wipe Dalvik Cache, Fix Permissions
10. - Reboot phone
Alright, once you are done with the reboot, it will start loading the ROM. Let it be for around 10 minutes, so its done with everything. Dont set it up, Dont do ANYTHING. Just watch some youtube, or have a beer, or call that girlfriend of yours. Now after the 10 minutes are done (or at least 40 minutes if you talked with the girlfriend ) - reboot the phone again.
INSTALLING GOOGLE APPS​
Now its time to get Market, Gmail and all the other goods.
Here is the newest google apps - HERE
Now download the newest Talk with video - HERE
Once you do that - Put them on your SD card and reboot into CWM Recovery and follow the steps:
Code:
1. - Do a nandroid backup of your current ROM. Just in case things go south.
2. - Flash the Google Apps
3. - [B][I][U]AFTER THAT[/U][/I][/B] flash the gapps with new Talk
4. - Wipe Cache
5. - Go to advanced
6. - Wipe Dalvik Cache
7. - Fix Permissions
8. - Reboot Phone
Now set them up, and you are set. You have MARKET!
UPDATING FROM AN OLDER BUILD​
If you already had the CM7 on your device, and want to install to the latest Alpha - follow the instructions:
Code:
1. - Download New Update
2. - Reboot into CWM Recovery
3. - DO A NANDROID BACKUP!!!!
4. - Install the new update
5. - Wipe Cache
6. - Go into Advanced, and wipe Dalvik Cache
7. - Reboot and enjoy the newest Alpha!
8. - If it runs worst than the build you had before, and you didnt do a backup - blame yourself and Santa for destroying Christmas, and start over.
RECOMMENDED RADIO​
persiansown said:
I recommend using radio 10.56.9035.00U_10.14.9035.01 because this is the radio that we personally tested.
Please note flashing someone else's kernel may ruin your experience with this rom and I advise against it. This rom was a joint effort between Bumblebee, cretin45, toastcfh, defer, myself, and the rest of the CM team.
Click to expand...
Click to collapse
To install it - just put the zip on your SD card, reboot into bootloader, select Bootloader and it will ask you if you want to apply the update. Press volume UP to apply update, dont shut off the phone, and when its done - press Power to reboot.
DO NOT CHANGE THE NAME OF THE FILE

STUCK IN A BOOTLOOP AFTER RADIO UPDATE​
If you are stuck in a bootloop after the radio update, all you need to do is the following:
Code:
1. - Open the back cover
2. - Remove the SD Card
3. - Pull the battery out for 5 secs and put it back in
4. - Put the cover back on
5. - Press Vol Down and Power at the same time. Keep holding on Vol Down till you get in bootloader
6. - Select Recovery
7. - Wipe Cache
8. - Put your SD Card back in
9. - Reboot phone and its all working again. Yey.
Here is another solution, thanks to joshndroid for the tip !
joshndroid said:
tony..
may i suggest in your guide thread to cm7 as a possible solution to the radio to flash AFTER you flash the ROM/UPDATE...
also;
maybe can i suggest to take the radio.img file out of the flash zip and flash it with fastboot...
1. Open zip file and place the radio.img into the location of your adb/fastboot (platform-tools or tools, depending how you set your fastboot up)
2. Place your phone into fastboot.. by connecting phone to computer and typing
adb reboot bootloader
OR
by turing your phone off and holding volume down + power on buttons
3. flash radio by typing these fastboot commands
fastboot flash radio radio.img
4. once that is finished restart phone by typing
fastboot reboot
i did both of these things and accrued no problems and as you know im not a TMOUS and it seems that every EU phone owner blames the ROM for being american in region, which we both know that is not a problem..
Click to expand...
Click to collapse
Thank you, sir!
INSTALLING CUSTOM KERNEL​
PLEASE MAKE SURE THAT YOU ARE INSTALLING THE CM7/AOSP KERNEL, AND NOT THE SENSE ONE!!!!!!!!!!!
If you are having any issues with the current CM7 build - you can always flash a custom kernel. Head over to Faux123's Thread and download the newest kernel. Just to be on the safe side - download the regular newest kernel, don't go with the extreme edition (if this is your fist time flashing a kernel), as it might be unstable for your device.
How to do that, you will ask?
Code:
1. - Download the kernel
2. - Put the .zip on your SD card
3. - Boot into CWM Recovery
4. - Format Cache
5. - Flash the .zip file
6. - Go into Advanced
7. - Format Dalvik Cache
8. - Reboot your phone, and enjoy your new kernel
Big ups to Faux123 for all his great work, I have been following him since the MyTouch 4G, its always a pleasure to see what he has cooking for us!
FIXING SOUND VOLUME​
To fix the sound volume - you need to do the following:
Code:
1. - Go to Settings
2. - Go to Cyanogen Mod Settings
3. - Go to Sound
4. - Scroll down and find "Always play on speaker"
5. - Check Notifications, Ringtones, Alarms
Now you have a full working Sound. People say that right after you connect your headphones - it removes these settings. So you might have to do them one more time. Just do it! There is no known permanent fix right now. Hopefully in one of the nightlies it will be addressed.
HOMESCREEN LAG​
If your homescreen is lagging, like mine did - I suggest using a different launcher. I removed ADW and installed Launcher Pro. I havent had a single moment of lag after that.
Or you can head over to the second post, and download the 2D or 3D replacement Launcher, which will make things better. Big thanks to xboarder56 for sharing them with all of us!
BATTERY ISSUES​
First - If you have problems with your battery draining too fast - maybe its because you installed another kernel. So try reverting back to stock kernel (Follow the "flashing CM7" guide, just dont wipe anything).
If issues are still there - Try to recalibrate your battery. You can do that by two different ways:
1st - Charge your battery to 100%, drain it all the way till it shuts off. Now dont turn the phone on, just plug it in, and leave it like that for 7-8hrs. Best done overnight. In the morning - turn on the phone, and repeat everything again. That should fix it.
2nd - Download "Battery Calibration" App from the market. Install, and follow the guides
BETTER CAMERA FIX​
Alright, thanks to jjdeveau for this fix. If you do not like the camera that comes with CM7 - you can use the MIUI Camera.
Here is how to install it:
jjdeveau said:
Okay so.. For all of you who want a better camera. Here is the miui camera apk.
DO NOT JUST INSTALL IT!
#1 Open rom manager and Back up your Rom
#2 copy to system/app replacing the stock one.
#3 change the permissions but tapping and holding on the app and going to properties then hit change make sure the permissions looks the same as the other aps in the folder.
#4 open app let it install.
#5 I had to reboot phone then it showed up in my aps as miui camera.
The downside is the camera zoom still does not work and it does not support the front facing camera. tap to focus is working as well as the stock effects. it also has the panoramic view and is about as close to the sense camera as you can get right now.
Click to expand...
Click to collapse
Just download it from HERE and follow the instructions above, brought to you by jjdeveau. Thanks buddy!
CORRECT APN SETTINGS FOR TMOBILE-US USERS​
camalus said:
Fixed my issues with Wifi-Calling MMS.
I talked to TMobile and they gave me the correct info for the APN settings.
I deleted both of the APNs listed under wireless settings and created a new one.
Just in case any of you are having issues with SMS or MMS using Wifi-Calling.. give this a shot.
Create a new APN.
Name: T-Mobile
APN: epc.tmobile.com
Proxy: 216.155.165.050
Port: 8080
Username: leave blank
Password: leave blank
Server: leave blank
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
MMS Proxy: 216.155.165.050
MMS Port: 8080
MCC: 310
MNC: 260
Authentication Type: leave blank
APN: default,supl,mms (Very important to not have a space in there.. just the ,)
hit the menu button and hit save. then use that apn. You should now have working MMS and SMS.
Hope that helps. Cheers.
Click to expand...
Click to collapse
FLASH PROBLEM WITH STOCK BROWSER​
There are two workarounds to this issue:
1st one is - just download and install opera mobile from the market. It runs flash with no issues.
2nd one is coming to us, thanks to LSears:
For those of you having problems with Flash, it seems to be happening on a few devices with CM7.1. It can be fixed by altering the config.data file of the plugin within any app using it.
So, with the default browser as an example, you'd need to change directory (in ADB shell or a terminal emulator) to...
/data/data/com.android.browser/app_plugins/com.adobe.flashplayer/.macromedia/Flash_Player/
and then alter the permissions of the config.data with...
chmod 000 config.data
I've also done the same things within the BBC News app and BBC iPlayer. All now work perfectly! I hope that helps those with problems.
Click to expand...
Click to collapse
GPS LOCK FIX / WORKAROUND​
For people that have GPS lock issues - I have a little fix/workaround that worked out great for me and my issues. I hope it works for all of yall.
You need to go to the market, and download GPS Test by Chartcross Ltd (its free).
Open the program -> hit the menu button -> select Settings -> hit "Clear AGPS" and after that hit "Update AGPS". Give it a few minutes and you should have a much better reception and lock on more sats. I got 6 sats locked from the inside of my house.
If it stops showing you the GPS icon - thats fine, just reboot the phone and it will all be ok.

It's bit obivious...
but I would add doing Backup before wiping/formating etc... just if something goes wrong.

Why not put this in the cm7 thread in the op just pm the dev

walto said:
but i would add doing backup before wiping/formating etc... Just if something goes wrong.
Click to expand...
Click to collapse
+1 +1 +1 +1 +1 +1 +1 +1 +1 +1 +1 +1 +1 +1 +1 +1 +1 +1 +1 +1 +1 +1 +1 +1 +1 +1 +1 +1 +1 +1 +1 +1 +1 +1 +1 +1 +1 +1 +1 +1

daman215 said:
Why not put this in the cm7 thread in the op just pm the dev
Click to expand...
Click to collapse
Cause in my experience - there is NEVER any guides provided by the CM7 team. In every phone sections that you look at - there is always a separate thread for guides and fixes.
Plus all the questions that are answered in this thread are asked over 15329852 times in the ROM thread, and its probably good to have them all in one place, instead of people having to read through hundreds (soon to be Thousands) of pages...

I would add a step for making a nandroid backup. Good writeup though.

Walto said:
but I would add doing Backup before wiping/formating etc... just if something goes wrong.
Click to expand...
Click to collapse
Thanks bud,
Almost forgot about that... Would of been a big mess for some of the new to android people around
dcmtnbkr said:
I would add a step for making a nandroid backup. Good writeup though.
Click to expand...
Click to collapse
Already done

Does Wifi Calling on TMOUS require a separate flash?
Thanks!

psychedelicx said:
Does Wifi Calling on TMOUS require a separate flash?
Thanks!
Click to expand...
Click to collapse
Nope, its already included.

t0ny0 said:
Nope, its already included.
Click to expand...
Click to collapse
Thanks for the guide, very helpful, and I'm sure not only for beginners.
f.
Sent from my HTC Sensation Z710e

Nice post but didn't CM got like a whole wiki website for this stuff?

Any info on a fix it workaround for calls disconnecting when putting phone against your ear, I.e. when proximity sensor kicks in? Mainly affecting uk users.

pr0x2 said:
Nice post but didn't CM got like a whole wiki website for this stuff?
Click to expand...
Click to collapse
They might, but that doesn't really stop the billion questions asked all the time, so that makes me think that people are not going to the wiki, they are looking for answers up in this forum.

t0ny0 said:
They might, but that doesn't really stop the billion questions asked all the time, so that makes me think that people are not going to the wiki, they are looking for answers up in this forum.
Click to expand...
Click to collapse
Just a little anecdotal support-- when I rooted my first Android device (Nexus One, if it matters) I started off in a Guide thread in the Development section. Of course, I did finally end up at the CM Wiki, which I don't think it could hurt to link to eventually.
However, the extra bits at the end about flashing the latest GTalk and workarounds for common bugs in the Alpha version are things that I don't think would necessarily make it to their official Wiki. I think the scope of this thread is perfectly helpful

Very useful guide.
what is the recommended radio for cm7? I searched the cm7 thread and read the question asked several times but no clear cut answer. Might be helpful to add that info for people like me
Also, on reboot I lose network connectivity and have had to flash twice already...full wipe both times. I think it might be radio related.

t0ny0 said:
Cause in my experience - there is NEVER any guides provided by the CM7 team. In every phone sections that you look at - there is always a separate thread for guides and fixes.
Plus all the questions that are answered in this thread are asked over 15329852 times in the ROM thread, and its probably good to have them all in one place, instead of people having to read through hundreds (soon to be Thousands) of pages...
Click to expand...
Click to collapse
THIS. Thanks for your contribution!
Sent from my HTC Sensation Z710e using Tapatalk

Wifi calling FC still on going after following both your fixes ... any other ideas
Sent from my Sensation using XDA Premium App

stanny2k said:
Wifi calling FC still on going after following both your fixes ... any other ideas
Sent from my Sensation using XDA Premium App
Click to expand...
Click to collapse
I am fresh out of ideas..
Maybe go ahead and try Faux kernel, and see if its gonna keep FC after that...
Profondo_Rosso said:
Very useful guide.
what is the recommended radio for cm7? I searched the cm7 thread and read the question asked several times but no clear cut answer. Might be helpful to add that info for people like me
Also, on reboot I lose network connectivity and have had to flash twice already...full wipe both times. I think it might be radio related.
Click to expand...
Click to collapse
I am using 10.42.9007.00P_10.11.9007.15
Seems to be working for me... Added it to the GUIDE and linked to the thread where it can be found, and also that other thread has instructions on how to install it

Issue with call disconnecting resolved.
Confirmed working. Details here :
http://forum.xda-developers.com/showthread.php?t=1261154
I installed the file using es file explorer. Set it to root enabled and to mount the system as read write and then copy file to system/lib