When I first set up my Infuse (stock froyo), mobile internet (EDGE/GPRS...we don't have 3g/4g here yet) was working. Then I rooted and flashed CM7 on it. The net would still work. Then one day, it just freaking stopped working. No APNs were changed, no radio bands were touched...the carrier didn't change anything...it just stopped. I reverted it back to stock using GTG...and double confirmed the APN settings from the carrier. And it still won't work. Restart, flight mode...I've done it all. Many times over. I've tried different APNs from the net. Nothing works. I'm stumped. So is the carrier's tech support
Any idea?
Try changing ROM. Do a clean install, and do not restore any system data or apps.
I went through multiple cm7 builds...with complete formatting of /system and /data and /cache. Then odin'd 2 stock builds
Could it be a sim issue?
Sent from my Galaxy SII
Simba501 said:
Could it be a sim issue?
Sent from my Galaxy SII
Click to expand...
Click to collapse
hmmm.... good idea... i'll try the sim in another phone to see if net works
Turned out to be a network issue. They did some backend fixing and resetting. I got the net back.
I have no more internet after I updated my rom to SKY 4.2d-10. Everything else works. I am on AT&T. Please help.
check your apn settings, and that your radio is compatible with the rom u flashed. I'm almost sure it's your apn settings though.
Also, if that rom includes that 15 toggle mod, make sure active data packets is set to enabled in settings, sometimes the data toggle sticks, and doesn't work
jdmz said:
I have no more internet after I updated my rom to SKY 4.2d-10. Everything else works. I am on AT&T. Please help.
Click to expand...
Click to collapse
Internet as in wifi or internet as in cellular data? No wifi = reflash, no cell data = see above.
Sent from my SAMSUNG-SGH-I727 using xda premium
Does anyone that has this ROM running know how to keep your network preferences after rebooting? i.e. I'm using the Network app in the ROM to change my network type to 'WCDMA preferred' from LTE. This works fine, however, when I reboot the device, it defaults back to LTE mode.
Any clues?
Thanks
martsin said:
Does anyone that has this ROM running know how to keep your network preferences after rebooting? i.e. I'm using the Network app in the ROM to change my network type to 'WCDMA preferred' from LTE. This works fine, however, when I reboot the device, it defaults back to LTE mode.
Any clues?
Thanks
Click to expand...
Click to collapse
It's normal for it to revert back to LTE it doesn't stick to whatever setting you set when you reboot. You are required to change it every time.
Cheers.
fluxgfx said:
It's normal for it to revert back to LTE it doesn't stick to whatever setting you set when you reboot. You are required to change it every time.
Cheers.
Click to expand...
Click to collapse
Thanks for the input. I recall when I was running the stock Rogers firmware, I changed it to WCDMA Preferred and it stuck there even if the phone rebooted.. thought it was available for the same functionality on the rom..
I know a lot of people have been reporting issues with getting or keeping LTE with some of the CM based roms. I too had the issue.
After digging through threads for the HOX and several other devices I was able to find a solution (for me) and just wanted to share my findings here in a fresh thread (plus I'm a noob and can't post in the developer threads for those experiencing the issue).
Any time I went from a 4.0.4 Sense-based rom to any of the cm based roms I could never get my LTE to stick even after changing apns or *#*#info#*#*. What I discovered was if I would flash a Sense-based rom that was prior to 4.0.4 (I use cleanrom 4.0) , wipe caches, full wipe and then install the CM based rom all things were good with my LTE regardless of which radio I flashed.
Hopefully this will help some of you out there.
I've also discovered that coming from cr4.5 that there are settings that stick...namely wifi settings. I've wiped everything on my phone including internal storage and flashed something new and in the newly flashed roms there are wifi settings were remembered.
I don't know where any of this stuff is stored in the phone but i thought that a full system wipe, cache, dalvich would have cleared EVERYTHING.
jess.hickey said:
I've also discovered that coming from cr4.5 that there are settings that stick...namely wifi settings. I've wiped everything on my phone including internal storage and flashed something new and in the newly flashed roms there are wifi settings were remembered.
I don't know where any of this stuff is stored in the phone but i thought that a full system wipe, cache, dalvich would have cleared EVERYTHING.
Click to expand...
Click to collapse
wifi settings are synced to google FYI
gunnyman said:
wifi settings are synced to google FYI
Click to expand...
Click to collapse
Learn something new every day...thanks!
Then might I ask, why don't those settings, or why don't my apps auto load, when I use an AOKP rom?
jess.hickey said:
Learn something new every day...thanks!
Then might I ask, why don't those settings, or why don't my apps auto load, when I use an AOKP rom?
Click to expand...
Click to collapse
good question, that's one for the AOKP folks.
Flash to CR 4.0 works!
jess.hickey said:
Any time I went from a 4.0.4 Sense-based rom to any of the cm based roms I could never get my LTE to stick even after changing apns or *#*#info#*#*. What I discovered was if I would flash a Sense-based rom that was prior to 4.0.4 (I use cleanrom 4.0) , wipe caches, full wipe and then install the CM based rom all things were good with my LTE regardless of which radio I flashed.
Hopefully this will help some of you out there.
Click to expand...
Click to collapse
THANKS! I wasn't getting a 4G icon at all on CM10 but I did a full wipe (factory/system), flashed CR 4.0, checked 4G speeds (check), did another full wipe and installed CM10 & GA. As soon as the welcome screen came up I saw a 4G in the status bar. :good:
edditnyc said:
THANKS! I wasn't getting a 4G icon at all on CM10 but I did a full wipe (factory/system), flashed CR 4.0, checked 4G speeds (check), did another full wipe and installed CM10 & GA. As soon as the welcome screen came up I saw a 4G in the status bar. :good:
Click to expand...
Click to collapse
I can confirm that the above mentioned fix worked for me too!
When u say full wipe. What exactly do u wipe? cache? system? external storage? factory reset?
jzhang0818 said:
When u say full wipe. What exactly do u wipe? cache? system? external storage? factory reset?
Click to expand...
Click to collapse
Wipe Caches, Factory Reset, System wipe. Everything but the SD card.
[EDIT] I shouldn't say "everything". No need to wipe battery stats, rotation or SD card for this particular fix.
Should I do a fresh flash of cm? Or do u think a cm backup would work?
(Update), dirty flash back no working for that. Too lazy to go other route at this point.
Sent from my One X using xda app-developers app
worked for me perfectly. Thanks.
this is driving me nuts
I tried following this.... nothing works
clean ROM 4.0 then wipe 'all' then install CM10 8-29 (since link to 8-30 is broken)
I am still only getting HSPA and 3G
APN is always set to WCDMA by default
I use clockwork recovery... could that be it ?
help me out guys.
philippe.bureau said:
I tried following this.... nothing works
clean ROM 4.0 then wipe 'all' then install CM10 8-29 (since link to 8-30 is broken)
I am still only getting HSPA and 3G
APN is always set to WCDMA by default
I use clockwork recovery... could that be it ?
help me out guys.
Click to expand...
Click to collapse
Under settings, wireless and networks, more, mobile networks, access point names are you on the ATT LTE apn?
Sent from my One X using xda premium
stnguyen09 said:
Under settings, wireless and networks, more, mobile networks, access point names are you on the ATT LTE apn?
Sent from my One X using xda premium
Click to expand...
Click to collapse
I am with Rogers. I see rogers-core-appl1.apn that was set by default.
I do not know if this should or not connect to LTE. I found on a website that I could use ltemobile.apn but its only getting me HSPA and 3G.
I might have to reflash on cleanrom 4.0 and compare APN. but i do get 4G-LTE with clean rom
Anyone can tell me what APN they use to get LTE on rogers with all APN info?
Thanks
---------- Post added at 12:06 PM ---------- Previous post was at 11:16 AM ----------
SUCCESS !!!!!
ok, so the APN was indeed rogers-core-appl1.apn and this one does not give LTE access.
I set up a new APN as below
Name: Rogers LTE
APN: ltemobile.apn
MMSC: xxxx://mms.gprs.rogers.com (please xxxx by https at beginning of the line... sorry as I am new on forum I cannot paste URL)
MMS Proxy: 10.128.1.69
MMS Port: 80
MCC - 302
MNC - 720
APN Type: *
I then changed the mode to LTE/GSM/CDMA using the *#*#4636#*#* and I now get 4g icon that means LTE.
I also see the its LTE from the phone info page.
Thanks for your help.!!
philippe.bureau said:
I am with Rogers. I see rogers-core-appl1.apn that was set by default.
I do not know if this should or not connect to LTE. I found on a website that I could use ltemobile.apn but its only getting me HSPA and 3G.
I might have to reflash on cleanrom 4.0 and compare APN. but i do get 4G-LTE with clean rom
Anyone can tell me what APN they use to get LTE on rogers with all APN info?
Thanks
Click to expand...
Click to collapse
For the Rogers phones I have done 3 of them now and when you flash CleanRom 4.0 you have to go in and setup the Rogers APN and connect at least once. I found this makes a huge difference. If you don't for whatever reason the settings don't stick.
Once you flash CM10 I turn mobile data off and erase the 3 APN's that are listed. I then start fresh with a new APN for LTE.
I only have HSPA+ out here where I am so I can't test if the LTE or 4G symbol comes up. I have noticed that with HSPA+ I still only show as connected to HSPA under Phone Info but the speeds are HSPA+.
The settings for the APN that I used for Rogers is:
Name Rogers LTE
APN ltemobile.apn
Proxy Not Set
Port Not Set
User Not Set
Pass Not Set
server Not Set
mmsc http://mms.gprs.rogers.com
mms proxy 10.128.1.69
mms port 80
mms protocol WAP 2.0
mcc 302
mnc 720
auth Not Set
apn type *
apn enabled enabled
bearer unspecified
Also CM10 erases the voicemail number from the phone. So call your phone from your phone and access your voicemail. If you check your call log after that the voicemail number should show up there.
josh3794 said:
Also CM10 erases the voicemail number from the phone. So call your phone from your phone and access your voicemail. If you check your call log after that the voicemail number should show up there.
Click to expand...
Click to collapse
yes I had that fixed. number is +1 514 992 1188 for my region (Montreal)
By the way, the signal type reset on reboot. I need to dial *#*#4636#*#* and select LTE/GSM/CDMA.
I know some people have made it stick and I followed the instructions but it does not work for me. hopefully they can fix this.
I cleared everything and flashed to cleanROM 4.0 then cleared again and installed CM10-8-29.
This is a minior issue but gets on my nerves.
Cheers !
philippe.bureau said:
By the way, the signal type reset on reboot. I need to dial *#*#4636#*#* and select LTE/GSM/CDMA.
I know some people have made it stick and I followed the instructions but it does not work for me. hopefully they can fix this.
I cleared everything and flashed to cleanROM 4.0 then cleared again and installed CM10-8-29.
This is a minior issue but gets on my nerves.
Cheers !
Click to expand...
Click to collapse
Try backing up in twrp then flashing to cr4.0 (not 4.5) connect to lte then restore backup without wiping
Sent from my One X using xda app-developers app
sdotfitz said:
Try backing up in twrp then flashing to cr4.0 (not 4.5) connect to lte then restore backup without wiping
Sent from my One X using xda app-developers app
Click to expand...
Click to collapse
Thanks, I will try that. I always wiped caches in my many attempts
---------- Post added at 01:54 PM ---------- Previous post was at 01:11 PM ----------
philippe.bureau said:
Thanks, I will try that. I always wiped caches in my many attempts
Click to expand...
Click to collapse
Its not working either. Nothing seems to get the signal type to stick on my phone.
Its a minor bug and I guess I can be patient and wait for a fix.
The one that is really bugging me is the low volume on calls.
Hope they can fix it.
philippe.bureau said:
Thanks, I will try that. I always wiped caches in my many attempts
---------- Post added at 01:54 PM ---------- Previous post was at 01:11 PM ----------
Its not working either. Nothing seems to get the signal type to stick on my phone.
Its a minor bug and I guess I can be patient and wait for a fix.
The one that is really bugging me is the low volume on calls.
Hope they can fix it.
Click to expand...
Click to collapse
In regards to the call volume: http://forum.xda-developers.com/showpost.php?p=30919624&postcount=3061
Hi All.
I've got a Samsung Galaxy Relay 4G using PhilZ Touch 6 recovery and cm-11-20140518-NIGHTLY-apexqtmo. I have an AT&T sim card and when I try to input APN settings for AT&T nothing saves. I've tried everything including 5 ROM's, all running KitKat emulations. I read that Android 4.0+ will not allow you to change APN settings, but is there some workaround. I've also discovered it disables APN apps from accessing APN settings.
I've also tried to flash 10.2 but I get Status 7 errors every time I try. I've followed instructions on removing access commands from the updater-script file and re-zipping, but it also aborts.
I've called *#*#4636#*#* and it doesn't look like the phone sees the SIM card, but maybe that's due to the APN settings? It won't even call let alone send/receive data. I've tried 2 different AT&T SIM cards with the same result.
Any help would be greatly appreciated!
Kenwood97031 said:
Hi All.
I've got a Samsung Galaxy Relay 4G using PhilZ Touch 6 recovery and cm-11-20140518-NIGHTLY-apexqtmo. I have an AT&T sim card and when I try to input APN settings for AT&T nothing saves. I've tried everything including 5 ROM's, all running KitKat emulations. I read that Android 4.0+ will not allow you to change APN settings, but is there some workaround. I've also discovered it disables APN apps from accessing APN settings.
I've also tried to flash 10.2 but I get Status 7 errors every time I try. I've followed instructions on removing access commands from the updater-script file and re-zipping, but it also aborts.
I've called *#*#4636#*#* and it doesn't look like the phone sees the SIM card, but maybe that's due to the APN settings? It won't even call let alone send/receive data. I've tried 2 different AT&T SIM cards with the same result.
Any help would be greatly appreciated!
Click to expand...
Click to collapse
yes there is a way to be able to and requires modding the build.prop file... i can show you how if need be
REV3NT3CH said:
yes there is a way to be able to and requires modding the build.prop file... i can show you how if need be
Click to expand...
Click to collapse
Actually it turns out I couldn't see the IMEI number either, so I returned to stock ROM and could then see the IMEI. I then flashed CWM 6.0.1.2 and CM 10.2 and was able to then set the APN. I'm still having trouble getting phone and data connection over the cell, but at least it now shows some bars. Thanks for replying, though.
My connection issue was a problem with the SIM. It's all working properly now.