Does anyone that has this ROM running know how to keep your network preferences after rebooting? i.e. I'm using the Network app in the ROM to change my network type to 'WCDMA preferred' from LTE. This works fine, however, when I reboot the device, it defaults back to LTE mode.
Any clues?
Thanks
martsin said:
Does anyone that has this ROM running know how to keep your network preferences after rebooting? i.e. I'm using the Network app in the ROM to change my network type to 'WCDMA preferred' from LTE. This works fine, however, when I reboot the device, it defaults back to LTE mode.
Any clues?
Thanks
Click to expand...
Click to collapse
It's normal for it to revert back to LTE it doesn't stick to whatever setting you set when you reboot. You are required to change it every time.
Cheers.
fluxgfx said:
It's normal for it to revert back to LTE it doesn't stick to whatever setting you set when you reboot. You are required to change it every time.
Cheers.
Click to expand...
Click to collapse
Thanks for the input. I recall when I was running the stock Rogers firmware, I changed it to WCDMA Preferred and it stuck there even if the phone rebooted.. thought it was available for the same functionality on the rom..
Related
After installing MIUI I can`t enable data transfer (2g/3g internet). Data transfer is turning on, but there is no 2g/3g logo and internet. This happens after installing all MIUI stock and custom roms. APN settings is correct, before it was ok. I`m installing via Clockwork recovery v5. Device is G2x (P999)
What should I do? How to enable it?
I believe for the g2x you should see an H next to the bars, that is if you are in a good service area.
Otherwise I think it also shows G, and E.
If it doesn't have anything at all, then I'm not sure.
Does the internet work when you go inti the browser?
Sent from my LG-P999 using xda premium
I'm having the same issue....
im using rg2x right now and the only way to fix it is with a hard reboot every time i turn my phone back on
try reflashing the faux kernel it worked for me to fix a problem i had not being able to turn my wifi on it should work for you too
what i have a problem is the backupp app does nto work for me im runing rg2x miui by richie
Yah I have the same problem, I notice it works but when you use WiFi then your done w/ the wifi and shut it off the regular cell data never comes back on - You have to completely reboot the phone...I'm using SINGH-UI - same thing
iCraft said:
I believe for the g2x you should see an H next to the bars, that is if you are in a good service area.
Otherwise I think it also shows G, and E.
If it doesn't have anything at all, then I'm not sure.
Does the internet work when you go inti the browser?
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
No...internet not working when I opening the browser. And EDGE/3G icons also not appear. ((
demarcus99 said:
im using rg2x right now and the only way to fix it is with a hard reboot every time i turn my phone back on
Click to expand...
Click to collapse
Hard reboot? How to do it? Is data working after hard reboot?
Cabronbr said:
try reflashing the faux kernel it worked for me to fix a problem i had not being able to turn my wifi on it should work for you too
what i have a problem is the backupp app does nto work for me im runing rg2x miui by richie
Click to expand...
Click to collapse
Please give me a link to that rom (Richie). How to reflash faux kernel?? I should do it after installing MIUI? Or you mean MIUI Rom with faux kernel? I`ve tried lots of MIUI roms (( Same problem anyway (
jele said:
Yah I have the same problem, I notice it works but when you use WiFi then your done w/ the wifi and shut it off the regular cell data never comes back on - You have to completely reboot the phone...I'm using SINGH-UI - same thing
Click to expand...
Click to collapse
I`ve tried SINGH UI too, as I remember wi-fi is on by defalut, isn`t it? So, I turned it off, and use my phone few days. Rebooted it few times, but data not worked ((
I had this problem before, go to ur APNs and go to authentication and make the authentication "None" instead of "Not set". That will enable ur data
naeem03 said:
I had this problem before, go to ur APNs and go to authentication and make the authentication "None" instead of "Not set". That will enable ur data
Click to expand...
Click to collapse
Thank you! I`ll try =) Tell me please which MIUI rom you tested with? Give me a link to that MIUI buld if it`s possible. Thank you! =)
Solution it works for me
ravshani said:
After installing MIUI I can`t enable data transfer (2g/3g internet). Data transfer is turning on, but there is no 2g/3g logo and internet. This happens after installing all MIUI stock and custom roms. APN settings is correct, before it was ok. I`m installing via Clockwork recovery v5. Device is G2x (P999)
What should I do? How to enable it?
Click to expand...
Click to collapse
Hey go to SETTINGS->MOBILE NETWORKS->ACCESS POINT NAMES-> in here select option button in your android phone, in the menu select NEW APN, you will get the APN settings as seen in this. In the link ACCESS NUMBER = SERVER in mobile.
As I am not allowed to post link for first ten TIMES! will guide you through
google search -> "vodafone apn address" the third result will be GPRS APN Settings with Username and Password - Modem Unlock. Click it and follow the method above mentioned.
Question was asked and answered.
Thread closed
I know a lot of people have been reporting issues with getting or keeping LTE with some of the CM based roms. I too had the issue.
After digging through threads for the HOX and several other devices I was able to find a solution (for me) and just wanted to share my findings here in a fresh thread (plus I'm a noob and can't post in the developer threads for those experiencing the issue).
Any time I went from a 4.0.4 Sense-based rom to any of the cm based roms I could never get my LTE to stick even after changing apns or *#*#info#*#*. What I discovered was if I would flash a Sense-based rom that was prior to 4.0.4 (I use cleanrom 4.0) , wipe caches, full wipe and then install the CM based rom all things were good with my LTE regardless of which radio I flashed.
Hopefully this will help some of you out there.
I've also discovered that coming from cr4.5 that there are settings that stick...namely wifi settings. I've wiped everything on my phone including internal storage and flashed something new and in the newly flashed roms there are wifi settings were remembered.
I don't know where any of this stuff is stored in the phone but i thought that a full system wipe, cache, dalvich would have cleared EVERYTHING.
jess.hickey said:
I've also discovered that coming from cr4.5 that there are settings that stick...namely wifi settings. I've wiped everything on my phone including internal storage and flashed something new and in the newly flashed roms there are wifi settings were remembered.
I don't know where any of this stuff is stored in the phone but i thought that a full system wipe, cache, dalvich would have cleared EVERYTHING.
Click to expand...
Click to collapse
wifi settings are synced to google FYI
gunnyman said:
wifi settings are synced to google FYI
Click to expand...
Click to collapse
Learn something new every day...thanks!
Then might I ask, why don't those settings, or why don't my apps auto load, when I use an AOKP rom?
jess.hickey said:
Learn something new every day...thanks!
Then might I ask, why don't those settings, or why don't my apps auto load, when I use an AOKP rom?
Click to expand...
Click to collapse
good question, that's one for the AOKP folks.
Flash to CR 4.0 works!
jess.hickey said:
Any time I went from a 4.0.4 Sense-based rom to any of the cm based roms I could never get my LTE to stick even after changing apns or *#*#info#*#*. What I discovered was if I would flash a Sense-based rom that was prior to 4.0.4 (I use cleanrom 4.0) , wipe caches, full wipe and then install the CM based rom all things were good with my LTE regardless of which radio I flashed.
Hopefully this will help some of you out there.
Click to expand...
Click to collapse
THANKS! I wasn't getting a 4G icon at all on CM10 but I did a full wipe (factory/system), flashed CR 4.0, checked 4G speeds (check), did another full wipe and installed CM10 & GA. As soon as the welcome screen came up I saw a 4G in the status bar. :good:
edditnyc said:
THANKS! I wasn't getting a 4G icon at all on CM10 but I did a full wipe (factory/system), flashed CR 4.0, checked 4G speeds (check), did another full wipe and installed CM10 & GA. As soon as the welcome screen came up I saw a 4G in the status bar. :good:
Click to expand...
Click to collapse
I can confirm that the above mentioned fix worked for me too!
When u say full wipe. What exactly do u wipe? cache? system? external storage? factory reset?
jzhang0818 said:
When u say full wipe. What exactly do u wipe? cache? system? external storage? factory reset?
Click to expand...
Click to collapse
Wipe Caches, Factory Reset, System wipe. Everything but the SD card.
[EDIT] I shouldn't say "everything". No need to wipe battery stats, rotation or SD card for this particular fix.
Should I do a fresh flash of cm? Or do u think a cm backup would work?
(Update), dirty flash back no working for that. Too lazy to go other route at this point.
Sent from my One X using xda app-developers app
worked for me perfectly. Thanks.
this is driving me nuts
I tried following this.... nothing works
clean ROM 4.0 then wipe 'all' then install CM10 8-29 (since link to 8-30 is broken)
I am still only getting HSPA and 3G
APN is always set to WCDMA by default
I use clockwork recovery... could that be it ?
help me out guys.
philippe.bureau said:
I tried following this.... nothing works
clean ROM 4.0 then wipe 'all' then install CM10 8-29 (since link to 8-30 is broken)
I am still only getting HSPA and 3G
APN is always set to WCDMA by default
I use clockwork recovery... could that be it ?
help me out guys.
Click to expand...
Click to collapse
Under settings, wireless and networks, more, mobile networks, access point names are you on the ATT LTE apn?
Sent from my One X using xda premium
stnguyen09 said:
Under settings, wireless and networks, more, mobile networks, access point names are you on the ATT LTE apn?
Sent from my One X using xda premium
Click to expand...
Click to collapse
I am with Rogers. I see rogers-core-appl1.apn that was set by default.
I do not know if this should or not connect to LTE. I found on a website that I could use ltemobile.apn but its only getting me HSPA and 3G.
I might have to reflash on cleanrom 4.0 and compare APN. but i do get 4G-LTE with clean rom
Anyone can tell me what APN they use to get LTE on rogers with all APN info?
Thanks
---------- Post added at 12:06 PM ---------- Previous post was at 11:16 AM ----------
SUCCESS !!!!!
ok, so the APN was indeed rogers-core-appl1.apn and this one does not give LTE access.
I set up a new APN as below
Name: Rogers LTE
APN: ltemobile.apn
MMSC: xxxx://mms.gprs.rogers.com (please xxxx by https at beginning of the line... sorry as I am new on forum I cannot paste URL)
MMS Proxy: 10.128.1.69
MMS Port: 80
MCC - 302
MNC - 720
APN Type: *
I then changed the mode to LTE/GSM/CDMA using the *#*#4636#*#* and I now get 4g icon that means LTE.
I also see the its LTE from the phone info page.
Thanks for your help.!!
philippe.bureau said:
I am with Rogers. I see rogers-core-appl1.apn that was set by default.
I do not know if this should or not connect to LTE. I found on a website that I could use ltemobile.apn but its only getting me HSPA and 3G.
I might have to reflash on cleanrom 4.0 and compare APN. but i do get 4G-LTE with clean rom
Anyone can tell me what APN they use to get LTE on rogers with all APN info?
Thanks
Click to expand...
Click to collapse
For the Rogers phones I have done 3 of them now and when you flash CleanRom 4.0 you have to go in and setup the Rogers APN and connect at least once. I found this makes a huge difference. If you don't for whatever reason the settings don't stick.
Once you flash CM10 I turn mobile data off and erase the 3 APN's that are listed. I then start fresh with a new APN for LTE.
I only have HSPA+ out here where I am so I can't test if the LTE or 4G symbol comes up. I have noticed that with HSPA+ I still only show as connected to HSPA under Phone Info but the speeds are HSPA+.
The settings for the APN that I used for Rogers is:
Name Rogers LTE
APN ltemobile.apn
Proxy Not Set
Port Not Set
User Not Set
Pass Not Set
server Not Set
mmsc http://mms.gprs.rogers.com
mms proxy 10.128.1.69
mms port 80
mms protocol WAP 2.0
mcc 302
mnc 720
auth Not Set
apn type *
apn enabled enabled
bearer unspecified
Also CM10 erases the voicemail number from the phone. So call your phone from your phone and access your voicemail. If you check your call log after that the voicemail number should show up there.
josh3794 said:
Also CM10 erases the voicemail number from the phone. So call your phone from your phone and access your voicemail. If you check your call log after that the voicemail number should show up there.
Click to expand...
Click to collapse
yes I had that fixed. number is +1 514 992 1188 for my region (Montreal)
By the way, the signal type reset on reboot. I need to dial *#*#4636#*#* and select LTE/GSM/CDMA.
I know some people have made it stick and I followed the instructions but it does not work for me. hopefully they can fix this.
I cleared everything and flashed to cleanROM 4.0 then cleared again and installed CM10-8-29.
This is a minior issue but gets on my nerves.
Cheers !
philippe.bureau said:
By the way, the signal type reset on reboot. I need to dial *#*#4636#*#* and select LTE/GSM/CDMA.
I know some people have made it stick and I followed the instructions but it does not work for me. hopefully they can fix this.
I cleared everything and flashed to cleanROM 4.0 then cleared again and installed CM10-8-29.
This is a minior issue but gets on my nerves.
Cheers !
Click to expand...
Click to collapse
Try backing up in twrp then flashing to cr4.0 (not 4.5) connect to lte then restore backup without wiping
Sent from my One X using xda app-developers app
sdotfitz said:
Try backing up in twrp then flashing to cr4.0 (not 4.5) connect to lte then restore backup without wiping
Sent from my One X using xda app-developers app
Click to expand...
Click to collapse
Thanks, I will try that. I always wiped caches in my many attempts
---------- Post added at 01:54 PM ---------- Previous post was at 01:11 PM ----------
philippe.bureau said:
Thanks, I will try that. I always wiped caches in my many attempts
Click to expand...
Click to collapse
Its not working either. Nothing seems to get the signal type to stick on my phone.
Its a minor bug and I guess I can be patient and wait for a fix.
The one that is really bugging me is the low volume on calls.
Hope they can fix it.
philippe.bureau said:
Thanks, I will try that. I always wiped caches in my many attempts
---------- Post added at 01:54 PM ---------- Previous post was at 01:11 PM ----------
Its not working either. Nothing seems to get the signal type to stick on my phone.
Its a minor bug and I guess I can be patient and wait for a fix.
The one that is really bugging me is the low volume on calls.
Hope they can fix it.
Click to expand...
Click to collapse
In regards to the call volume: http://forum.xda-developers.com/showpost.php?p=30919624&postcount=3061
Has anyone else had this problem? No matter what latest rom I try, there is no data service at all. Even when I go into the configuration menu from the dialer and try to select the network, it refuses to do it. No matter what I do, my data will not work at all.
projekt8e said:
Has anyone else had this problem? No matter what latest rom I try, there is no data service at all. Even when I go into the configuration menu from the dialer and try to select the network, it refuses to do it. No matter what I do, my data will not work at all.
Click to expand...
Click to collapse
I saw your posts in the forums.
I'm having the same issue. CM10.1 from 7/17 works, but nothing after that does. I'm on page plus. What were you on when you flashed? I had to downgrade my radio to the ICS radio to flash my phone. I'm not sure if this is the cause though.
I should just have to set it as cdma & evdo to get it work but the radio never seems to turn on.
Sent from my Nexus 7 using xda app-developers app
So I installed bmm without issue, made my back ups and started trying roms. I had a hell of a time getting anything to boot. I would get stuck on the boot animation every time. Finally got slim kat installed and that is the only one I can reliably boot into. Tried aokp 4.3 which booted the first time but gets stuck on the animation now.
Also, when aokp worked I had no mobile data. Same problem currently with slim kat.
Where do I go from here? I've tried clearing cache and davlik on both with no luck.
Sent from my MB865 using xda app-developers app
You have to add APNs manually
Sent from my MB865 using Tapatalk 2
devilhunter47 said:
You have to add APNs manually
Sent from my MB865 using Tapatalk 2
Click to expand...
Click to collapse
Thanks, Wasn't aware of that. I copied my APNs from my stock ROM. I get data now, just not 4g for some reason. I'm looking around to figure that one out.
nbucko said:
Thanks, Wasn't aware of that. I copied my APNs from my stock ROM. I get data now, just not 4g for some reason. I'm looking around to figure that one out.
Click to expand...
Click to collapse
Untick use 2g only option n initiate a new network search
Sent from my MB865 using Tapatalk 2
devilhunter47 said:
Untick use 2g only option n initiate a new network search
Sent from my MB865 using Tapatalk 2
Click to expand...
Click to collapse
I only have the options of 3g and 2g with 3g already being selected. I don't know whats going on. My stock ROM gets 4g with those APN's, re-entered everything to make sure I didn't miss anything but I still don't have 4g as an option.
nbucko said:
I only have the options of 3g and 2g with 3g already being selected. I don't know whats going on. My stock ROM gets 4g with those APN's, re-entered everything to make sure I didn't miss anything but I still don't have 4g as an option.
Click to expand...
Click to collapse
Type *#*#4636#*#*
Then select ''wcdma only''
Sent from my MB865 using Tapatalk 2
Well wcdma only didn't do anything. After messing with Slimkat and another 4.4 ROM (which only worked until I rebooted) I've decided that there are just too many bugs for me to use it daily. I decided to try a 4.3 ROM but I'm still having issues getting one to boot after the first reboot. I've let it sit on the boot animation for 45 minutes and it never loaded.
I haven't found a lot of advice on the subject of ROMs only booting once. Does anyone have any suggestions?
nbucko said:
Thanks, Wasn't aware of that. I copied my APNs from my stock ROM. I get data now, just not 4g for some reason. I'm looking around to figure that one out.
Click to expand...
Click to collapse
I realize this is an old one, but I thought it might be worth mentioning...
I had the same problem. When I copied APN data (specifically "apn type") from my stock ROM data did enable, but at a very slow speed. A quick search yielded this AT&T site which suggested different settings. I was able to choose the "ATT Phone" config and modify "apn type" from "default,supl,mms" to "default,mms,supl,hipri".
When I modified that value, data was much faster, but still only clocked 3.5 Mbps on my CM ROM vs 5.1 on Stock with SpeedTest.net app. I believe it used different servers and I only did a single AB test.
...and by the way - I am also a bit frustrated with the BMM setup. It seems like a third of the time I am unable to successfully boot back into my CM ROM. It always seems to boot into Stock ROM fine. I do have CM in the second slot which it sounds like some folks prefer to not use.
My Oneplus One which I flashed with LineageOS 14.1 will not make calls. I have gone into the *#*#4636#*#* menu and saw that the default mode is LTE/UMTS auto (prl). If I switch this to GSM, calling works fine. Is there a way I can unlock an option for LTE/Gsm or make calls over UMTS somehow? Any help would be appreciated and thanks in advance.
p7810456 said:
My Oneplus One which I flashed with LineageOS 14.1 will not make calls. I have gone into the *#*#4636#*#* menu and saw that the default mode is LTE/UMTS auto (prl). If I switch this to GSM, calling works fine. Is there a way I can unlock an option for LTE/Gsm or make calls over UMTS somehow? Any help would be appreciated and thanks in advance.
Click to expand...
Click to collapse
Was the VoUMTS working in previous ROM?
Mr.Ak said:
Was the VoUMTS working in previous ROM?
Click to expand...
Click to collapse
On the last CM13 stock ROM, I am pretty sure that there was an option for LTE/GSM auto(prl), and that is what I am trying to get back here.
p7810456 said:
On the last CM13 stock ROM, I am pretty sure that there was an option for LTE/GSM auto(prl), and that is what I am trying to get back here.
Click to expand...
Click to collapse
Maybe you can try changing firmware.