Database Info

[Q] Stuck on "Performing factory data reset"

I removed the ICS build and use ODIN to return back to stock build.
Still having some problem so i did a data reset. It keep getting stuck there and i already done it three times.
Any suggestions?

So you flashed GB stock.tar through Odin? Do you mean factory/data reset in clockwork recovery? Flashing back to stock should take away your root so you would have to flash CWM again, make a nandroid backup, and flash superuser zip again.
What problems where you having before and after the ICS build?
Explain a bit further exactly what you did.

I installed STOCK Tar using ODIN.
It is booting up fine except i keep getting errors like "android.process.acore" has stopped unexpectedly. Most of the android apps is not working, like phone, contacts, calendars, etc.
I try to do a factory reset and it keep stopping halfway and hangs.

Your going to have to flash the kj2 modem. I had the same problem. I saw that the ucalc4 was still there, its on its own partition so it doesn't get changed when you flash stock tar. What I did...
1. Flash cwm in Odin
2. Boot into cwm (do backup)
3. Flash kj2 modem (I did it twice)
4. Reboot
5. Check baseband (should be uckj2)
This made the FC's go away. It seemed to me that the stock tar doesn't like that baseband, I can't explain why though. Didn't make sense to me but I fixed it. Also I found the ICS leak doesn't like stock recovery. Fyi
Sent from my SAMSUNG-SGH-I727 using xda premium

Little bit lost here.
I already flash it twice using ODIN and using the uckj2 build.

jxl92182 said:
Little bit lost here.
I already flash it twice using ODIN and using the uckj2 build.
Click to expand...
Click to collapse
Build is one thing, baseband is different. When you flash stock your build will be uckj2, you say your on it. OK good. Now check your baseband, will probably still be the ICS baseband ucalc4, that is your modem. You need to flash the uckj2 modem in cwm. http://forum.xda-developers.com/showthread.php?p=20157930
Once you flash that your baseband will be uckj2. That should fix your fc's. Did for me. If not, you may need to try something else which I will explain if need be that will clean things up.
Sent from my SAMSUNG-SGH-I727 using xda premium

Already installed the radio twice.
Original Shipped AT&T Skyrocket Radio I727ATTKJ2 and RIL
using CWM and still giving me errors....
Currently my phone is showing this:
Basband
I727UCKJ2
Kernel
2.6.35.11
Build number
GINGERBREAD.UCKJ2

jxl92182 said:
Already installed the radio twice.
Original Shipped AT&T Skyrocket Radio I727ATTKJ2 and RIL
using CWM and still giving me errors....
Currently my phone is showing this:
Basband
I727UCKJ2
Kernel
2.6.35.11
Build number
GINGERBREAD.UCKJ2
Click to expand...
Click to collapse
OK. What you need to do then is clean things up. There are two ways that I use but I prefer #1.
1. Flash darkside superwipe in cwm. Do a battery pull. Go into Odin and flash k0nanes tar.
OR
2. Flash stock recovery. Wipe data/factory reset. Do a battery pull. Go into Odin and flash k0nanes tar.
Then you can cwm, root, flash anything you want.
Sent from my SAMSUNG-SGH-I727 using xda premium

Thanks a lot hcyplr29 and Presbycusis.
I use darkside's flash and then reload stock.
Everything is fine now.

Glad to hear that. I swear by darkside between ROMS.
Sent from my SAMSUNG-SGH-I727 using xda premium

jxl92182 said:
Thanks a lot hcyplr29 and Presbycusis.
I use darkside's flash and then reload stock.
Everything is fine now.
Click to expand...
Click to collapse
Yah....Darkside.Wipe is killer. Glad to hear your back in action. It is confusing at first getting OS version, kernel, and modem all strait. It is a good learning experience.
Sent from my SAMSUNG-SGH-I727 using xda premium

basically those fc's were becuz the partition table needs to be reset after flashing ics to go back to gb. Darkside does this.

hcyplr29 said:
OK. What you need to do then is clean things up. There are two ways that I use but I prefer #1.
1. Flash darkside superwipe in cwm. Do a battery pull. Go into Odin and flash k0nanes tar.
OR
2. Flash stock recovery. Wipe data/factory reset. Do a battery pull. Go into Odin and flash k0nanes tar.
Then you can cwm, root, flash anything you want.
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
please help. i installed ics and cwm then went back to gingerbread.
what i did was
-i used SGH-I727-UCKJ2-k0nane.tar to go back to GB
-after installing it i get FC.
-i installed recovery-clockwork-touch-5.8.1.3-hercules.tar
-after installing it i rebooted to CWM by pressing volume up & down buttons and power button.
-now i couldnt seem to navigate cwm 5.8.1.3. the screen keeps on blinking. when i press down it only gets on option #2 which is install zip. and when i press the power button to ok it doesnt do anything.
i wanted to flash darkside so to wipe everthing. but my cwm is not working.
pls help. i really appreciate all your response
thanks

agenthack said:
please help. i installed ics and cwm then went back to gingerbread.
what i did was
-i used SGH-I727-UCKJ2-k0nane.tar to go back to GB
-after installing it i get FC.
-i installed recovery-clockwork-touch-5.8.1.3-hercules.tar
-after installing it i rebooted to CWM by pressing volume up & down buttons and power button.
-now i couldnt seem to navigate cwm 5.8.1.3. the screen keeps on blinking. when i press down it only gets on option #2 which is install zip. and when i press the power button to ok it doesnt do anything.
i wanted to flash darkside so to wipe everthing. but my cwm is not working.
pls help. i really appreciate all your response
thanks
Click to expand...
Click to collapse
That's because it's touch recovery, you don't push any buttons. Lmao. Touch the screen to use it. Haha
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

hahahaha... woooooo.... that's a good one... well i installed a later version of the CWM.. i think it was 5.0.2.6 version.. is that ok to use? now i can use the up and down buttons... omg! now thats what i call D*mb @$$ hahahaha..my bad my bad

agenthack said:
hahahaha... woooooo.... that's a good one... well i installed a later version of the CWM.. i think it was 5.0.2.6 version.. is that ok to use? now i can use the up and down buttons... omg! now thats i call D*mb @$$ hahahaha..
Click to expand...
Click to collapse
I would just go back to 5.8. It's much better for me. Plus it works far better for ics builds. But yeah, you can use your buttons again for that old ass version you got now
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

ok thanks. i already installed back the latest cwm. now its working! just have 1 question. im trying to look for flash option but theres no option thats says flash. i wanna flash DARKSIDE.SUPER.WIPE.zip its on my sd card already.i tried to click on install zip and chose DARKSIDE.SUPER.WIPE.zip but it says process cant be done..can you please teach me how? sorry for my ignorance.

agenthack said:
ok thanks. i already installed back the latest cwm. now its working! just have 1 question. im trying to llok for flash option but it theres no option thats says flash. i wanna flash Flash DARKSIDE.SUPER.WIPE. its on my sd card already.i tried to click on install zip and chose Flash DARKSIDE.SUPER.WIPE but it says process cant be done..can you please teach me how? sorry for my ignorance.
Click to expand...
Click to collapse
install zip from ad card, then choose zip from sd card. Scroll down and click on the zip
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

got it! just did the darkside wipe...pulled the battery out after..then im flashing it now with odin SGH-I727-UCKJ2-k0nane...hope it works now with no FC and i hope i get my signal back...will update you inawhile..
thanks for your help..

agenthack said:
got it! just did the darkside wipe...pulled the battery out after..then im flashing it now with odin SGH-I727-UCKJ2-k0nane...hope it works now with no FC and i hope i get my signal back...will update you inawhile..
thanks for your help..
Click to expand...
Click to collapse
Don't use that tar. Use sammobile
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

[Q] Stuck in recovery mode

Last point it worked: CM7-RC3, March 2012 Baseband
I tried to flash a different kernel: Harsh or ELP and neither would boot
I tried factory resetting, formatting system, reflashing stock kernel, flashing faux kernel, restoring 2.3.3-4.04 various Nandroids no matter what it instantly is still booting into recovery D:

http://forum.xda-developers.com/showthread.php?p=26420163
Sent from my LG-P999 using Tapatalk 2

Didn't notice that when I had the kernel lol, thanks for the link got my phone booted back up

Sweet
Sent from my LG-P999 using Tapatalk 2

Phone won't start

I recently tried to flash the new Liquid smooth rom on my phone. After I installed it and resetted my phone it is stuck at the LiquidSmooth Logo. I have been waiting for it to load for an hour and it still on that screen. I tried taking out the battery and loading it again but it still hasn't loaded. I had Clean rom 5.6 before and I flashed it with cwm 10.1.

You check the md5 on the rom? Also you try reflashing it?
Sent from my SCH-I535 using xda premium

x714x said:
You check the md5 on the rom? Also you try reflashing it?
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
I have not and how do I reflash it?

Color Green said:
I have not and how do I reflash it?
Click to expand...
Click to collapse
Just go back into recovery and flash it again. Also try a factory reset as well if it still won't boot.
Sent from my SCH-I535 using Tapatalk 2

thesoldier said:
Just go back into recovery and flash it again. Also try a factory reset as well if it still won't boot.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
How do I go back into recovery if my phone wont load?

From the powered off state: vol up + home + power.
Sent from my SCH-I535 using Tapatalk 2

Going back to older radio

i don't know if its been answered or I just haven't seen it but, how do I flash the MB1 firmware... still fairly new at this... on stock, rooted phn... I downloaded the MB1 firmware, but just want to make sure if I just put on root of sd card and then flash using recovery?

Correct, no wiping needed, just flash in a custom recovery.
Sent from my SCH-I535 using Tapatalk 2

BadUsername said:
Correct, no wiping needed, just flash in a custom recovery.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
Do you mean no wiping the phone or no wiping the caches?

usmaak said:
Do you mean no wiping the phone or no wiping the caches?
Click to expand...
Click to collapse
Neither, just flash in recovery. It doesn't affect anything except the firmware.
Sent from my SCH-I535 using Tapatalk 2

Soft brick after kernel flashing fail.

My phone has been soft bricked after trying to flash the latest dkp kernel. I was using philz touch recovery and I tried to flash dkp kernel 3-20 build, and I got an error during flashing saying that it couldn't decompress the ramdisk. So I tried to flash the older version of dkp that I was using, and it failed to flash! I have never had problems like this before. So now my phone will not boot to system or go back to recovery. I can only access download mode. I was using CM11 with the ML1 modem and dkp kernel before my phone got bricked. It really frustrates me that my phone just randomly decided to freak out and brick itself, because I've been doing the same thing forever and never had any problems flashing a kernel. Please tell me how I can fix my phone. Thank you.

jonny30bass said:
My phone has been soft bricked after trying to flash the latest dkp kernel. I was using philz touch recovery and I tried to flash dkp kernel 3-20 build, and I got an error during flashing saying that it couldn't decompress the ramdisk. So I tried to flash the older version of dkp that I was using, and it failed to flash! I have never had problems like this before. So now my phone will not boot to system or go back to recovery. I can only access download mode. I was using CM11 with the ML1 modem and dkp kernel before my phone got bricked. It really frustrates me that my phone just randomly decided to freak out and brick itself, because I've been doing the same thing forever and never had any problems flashing a kernel. Please tell me how I can fix my phone. Thank you.
Click to expand...
Click to collapse
This how i did back to stock.
http://forum.xda-developers.com/showthread.php?t=1867253
Will help u on soft brick.
Odin enter download mode flash stock image. After that's all done. Dnt let ur fone install the ota. And root using CASUAL root and ur back to business
Sent from my SCH-I535 using Tapatalk

twistedillutions said:
This how i did back to stock.
http://forum.xda-developers.com/showthread.php?t=1867253
Will help u on soft brick.
Odin enter download mode flash stock image. After that's all done. Dnt let ur fone install the ota. And root using CASUAL root and ur back to business
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
I did an ODIN back to stock MF1. In ODIN it says "Pass!" above the com port, and it also says <OSM> All threads completed. (succeed 1 / failed 0). However, my phone has been stuck on the 4G LTE screen with the colorful rings for around 15 minutes and it doesn't seem to be doing anything. What should I do?

Pull battery out and reboot.. Thats mentioned on instructions.
Post wat odin tells u
Sent from my SCH-I535 using Tapatalk

twistedillutions said:
Pull battery out and reboot.. Thats mentioned on instructions.
Post wat odin tells u
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
Well when I pulled the battery and tried to reboot a samsung logo with an unlocked symbol was underneath it and it still gets stuck on the 4g LTE screen. Also, it won't allow me to enter the recovery.
So I went back to download mode on my screen and i noticed that it still says "System Status: Custom"

jonny30bass said:
Well when I pulled the battery and tried to reboot a samsung logo with an unlocked symbol was underneath it and it still gets stuck on the 4g LTE screen. Also, it won't allow me to enter the recovery.
Click to expand...
Click to collapse
Boot into recovery, factory reset, then reboot.
Sent from my SCH-I535 using Tapatalk 2

BadUsername said:
Boot into recovery, factory reset, then reboot.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
Like I said, it won't go into recovery mode. It seems like it is going to and then it just has a black screen.

BadUsername said:
Boot into recovery, factory reset, then reboot.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
You have to be able to boot into recovery, make sure you hold the volume up + home for an extended period of time.
If you can't, you need to Odin the stock rom and try again.
Sent from my SCH-I535 using Tapatalk 2

BadUsername said:
You have to be able to boot into recovery, make sure you hold the volume up + home for an extended period of time.
If you can't, you need to Odin the stock rom and try again.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
The ODIN to stock did not work correctly. Maybe I need a different MF1 tar file. Can someone point me to a link for it? I have searched an can't find a completely stock MF1 file.

jonny30bass said:
The ODIN to stock did not work correctly. Maybe I need a different MF1 tar file. Can someone point me to a link for it? I have searched an can't find a completely stock MF1 file.
Click to expand...
Click to collapse
http://www.androidfilehost.com/?fid=23134718111254196
Sent from my SCH-I535 using Tapatalk 2

BadUsername said:
http://www.androidfilehost.com/?fid=23134718111254196
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
That's the exact one that I just used. It didn't seem to restore to stock with that.

jonny30bass said:
That's the exact one that I just used. It didn't seem to restore to stock with that.
Click to expand...
Click to collapse
Don't know what else to tell you, it's a completely stock file.
Recovery, system, kernel, and bootloader.
If you can't boot into recovery it must've not flashed perfectly or something else is wrong, like your hardware.
Sent from my SCH-I535 using Tapatalk 2

BadUsername said:
Don't know what else to tell you, it's a completely stock file.
Recovery, system, kernel, and bootloader.
If you can't boot into recovery it must've not flashed perfectly or something else is wrong, like your hardware.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
I highly doubt that it is a hardware issue. I just tried to ODIN again and I'm in the same situation. One thing that I have noticed is that it tries to reinstall the MTP driver after using ODIN and it fails to install.
EDIT: Nevermind. I was able to enter recovery this time. I just did a factory reset. Hopefully it boots now. I will report back with results.
UPDATE: Ok. Everything seems fine now. Used casual to root and unlock bootloader again. Then installed PhilZ Touch Recovery. Now I am making a backup, and I am going to flash a Kit Kat Rom.