Is your Android device just laying around? Or do you want to get files from your device and put files on it but don't want to connect it to a computer? Servers Ultimate might be the app for you, it has over 70 different server types!
NO ROOT REQUIRED
Servers Ultimate allows to run multiple instances of different server types and gives access to some handy network tools. You can also remote control the app using the remote control client!
Coolest features:
- Run multiple instances of every server
- Use your device as a NAS or Honeypot
- Android 6+ support
- So many servers...
Servers:
- Caddy Server
- CVS Server
- Direct Connect Hub (DC Hub)
- DHCP Server
- DHCP Native Server
- DHCP Proxy Server
- DHCP Relay Server
- DLNA Server
- DLNA Native Server
- DNS Server
- DNS Native Server
- DNSMasq Server
- Dynamic DNS client (DDNS)
- eDonkey Server (ed2k / eMule server)
- Email POP3 & SMTP server
- FTP Proxy Server
- FTP Server
- FTP Native Server / FTP Root Server
- FTPS Server (Implicit FTPS server)
- FTPES Server (Explicit FTPS server)
- Flash Policy Server
- Git Server
- Gopher Server
- HTTP Proxy Server
- HTTP Snoop Server
- ICAP Server
- IRC Bot
- IRC Server
- iSCSI Server
- Icecast Server
- LPD Server (Printer Server)
- Load Balancer Server
- Memcached Server
- MongoDB Server
- MQTT Server (MQTT Broker)
- Multicast DNS Server (bonjour, zeroconf)
- MySQL Server
- Napster Server
- NFS Server
- Nginx Server
- Node.js Server
- NTP Server
- NZB Downloader Client
- PHP Server (with PHPMyAdmin, PHPSysInfo, PHPFileManager, noVNC)
- PXE Server (network boot)
- Lighttpd Server
- Port Forwarder
- Proxy server (optional tunneling)
- Remote Control App Server
- Rsync Server
- RTMP server
- RTMP Proxy Server
- Samba Server (SMB / CIFS)
- SIP Server
- SMPP Server
- SMS Gateway
- Socks Server
- SSH Server
- SFTP Server (part of the SSH Server)
- SCP Server (part of the SSH Server)
- Server Monitor
- Stomp Server
- Styx Server
- Syslog Server
- TFTP Server
- TFTP Native Server
- Telnet Server
- Telnet Native Server
- Test Server (Echo, Discard, Chargen, QOTD Protocol)
- Time server (NTP or TP)
- Torrent Downloader Client
- Torrent Tracker Server
- Trigger Server
- Unison Server
- UPnP Port Mapper
- USB/IP Server
- VNC Server
- VPN Server
- Wake On LAN Client
- HTTP / HTTPS web server
- Web Native Server (httpd)
- WebDAV server (optionally over SSL / TLS)
- WebSocket Server
- X11 Server
- XMPP Server (Jabber)
Network tools:
- Remote Control Client
- Simple shtaccess editor
- Connectability
- IP Calculator (IPv4 / IPv6)
- Port Scanner
- MySQL Monitor
- Whois
- Raw socket (TCP / UDP)
- Command line
- Ping
- Generate keys
- Multicast DNS
- Network speed
- HTTP Headers
- Wake On LAN
- Lookup (DNS, IP, Host, Mac to Vendor)
- Traceroute
- UPnP Port Mapper
So now you can use your device as file server, media server, give your friends their own account, etc!
We think it's the most complete server app on the Play store, but we would love to hear what you think of it. The trial version can be found on Android Play and is fully functional. The only difference between the trial and paid version is that in the paid version you can run more than two servers at the same time and it doesn't expire.
Download Servers Ultimate from Play
Or support us and use unlimited servers at the same time:
Download Server Ultimate Pro from Play
It would be appreciated if you leave a reply with what you (dis)like about the app! All feedback is welcome!
Beta testing
Servers Ultimate
Server Ultimate Pro
Server Ultimate Pack A
Server Ultimate Pack B
Server Ultimate Pack C
Server Ultimate Pack D
Server Ultimate Pack E
Server Ultimate Pack F
No feedback? It would be greatly appreciated if you could let me know what you think of it.
Thanks.
Runs nice! Will you be implementing php at all?
Sent from my Galaxy Nexus using xda app-developers app
Great to hear it runs nice However, the only library available for php on android requires SL4A.
So depending on the requests we might implement it.
Also, no other features you are missing?
Really nice testing it today! That way you don't need a media share device for your Phone like my Galaxy S3. Just enable DLNA and you can stream it to the TV Hope it works that way
I will test this app later.
But can i stream videos or music from a device having this app installed to another?
Great you tink I could run ruby on rails here?
Enviado desde mi GT-I9300 usando Tapatalk 2
Thanks for the feedback!
@saschb2b That's correct, it works that way. Let me know whether it all works ok!
@mikelodean7 Yes, you can. You could use the webdav server or dlna server and on another client use a player that support webdav or dlna. Let me know whether that worked!
@haffid Unfortunately not, we don't support php or ruby on rails yet. We might implement php but ruby on rails will take a lot longer..
Let me know whether it worked, I'm really curious whether it all works ok.
Themuzz said:
Thanks for the feedback!
@saschb2b That's correct, it works that way. Let me know whether it all works ok!
@mikelodean7 Yes, you can. You could use the webdav server or dlna server and on another client use a player that support webdav or dlna. Let me know whether that worked!
@haffid Unfortunately not, we don't support php or ruby on rails yet. We might implement php but ruby on rails will take a lot longer..
Let me know whether it worked, I'm really curious whether it all works ok.
Click to expand...
Click to collapse
Thanks for the feedback, I will be pending.
Enviado desde mi GT-I9300 usando Tapatalk 2
I´ve tested the DLNA server option. very very easy to set, but i have to find the best DLNA player ( MediaHouse UPnP / DLNA-Browser worked perfectly)
now its running very smoothly. exactly what i was looking for weeks ago. thanks man!!!!
@mikelodean7 So you are playing media using another Android phone from the DLNA server? Great to hear that works. Maybe you could post a little description about it on the google play reviews.
How is everyone else using the app??
So anyone else using the app? Would be great to get some feedback or maybe a review on Play. Worked quite hard on it.
Looks pretty sweet! However I currently don't have a use for this... but I'd definitely be willing to pay for PHP support (Ruby would be awesome-er!) since I'm a web developer and am looking to take my environment on the go.
I just busted out my HTC Hero G3. I hope this works!
Installing on my Viewsonic G-Tab running Jellybean. Going to test running a small mailserver on it. Will let you know what I find.
@dekaru Since more people are asking for it, we'll look into it. But don't get your hopes up, it's quite hard to implement
@LPPalScore Let me know whether it worked!
@indymx Ah, let me know whether it worked! The mail server is quite simple, and if you have problems setting it up you can try the putty to check some raw commands. All the raw commands for smtp and pop3 should work.
Great to hear so many people enjoy using the app!
Themuzz said:
@dekaru Since more people are asking for it, we'll look into it. But don't get your hopes up, it's quite hard to implement
@LPPalScore Let me know whether it worked!
@indymx Ah, let me know whether it worked! The mail server is quite simple, and if you have problems setting it up you can try the putty to check some raw commands. All the raw commands for smtp and pop3 should work.
Great to hear so many people enjoy using the app!
Click to expand...
Click to collapse
It doesnt save settings when adding servers, domain names & users.
Sent from my SGH-I997 using xda premium
Could you please describe the steps you took and what Android version you have?
It should work doing the following:
1. click the add server button and select email server
2. fill in a name
3. press back and a popup should ask whether you want to save the settings
4. press yes and it shows up in the list of servers
5. if that works just edit it and add domains and users
And if you get the error that the port is in use you should press the button "Get random port" for the pop3 and smtp port.
Let me know!
Themuzz said:
Could you please describe the steps you took and what Android version you have?
It should work doing the following:
1. click the add server button and select email server
2. fill in a name
3. press back and a popup should ask whether you want to save the settings
4. press yes and it shows up in the list of servers
5. if that works just edit it and add domains and users
And if you get the error that the port is in use you should press the button "Get random port" for the pop3 and smtp port.
Let me know!
Click to expand...
Click to collapse
It works fine on my Samsung Infuse.
I did all of that, and it just doesn't save anything. Not exactly sure what its doing wrong, but perhaps it's a permissions issue.
It's a G-Tab running TeamDRH version of CM10 (teamdrh.com)
indymx said:
It works fine on my Samsung Infuse.
I did all of that, and it just doesn't save anything. Not exactly sure what its doing wrong, but perhaps it's a permissions issue.
It's a G-Tab running TeamDRH version of CM10 (teamdrh.com)
Click to expand...
Click to collapse
So to be clear, the following does happen:
- When you add a server, fill in a name and press the back key a popup asks whether you want to save it.
- When you click yes you get back to the start screen and no server is listed?
Could you try going to the settings page of the app and check the option to save the server settings to the sdcard. Does that work?
And did you ever have problems with other apps?
Related
Hey Guys,
I was wondering if any one knows if there is a Cisco VPN client for wm6 or some other 3rd party VPN client that is compatible with Cisco 3000 series?
I also is there an RSS feed reader that can display the news from BBC on today's screen.
shazaani said:
Hey Guys,
I was wondering if any one knows if there is a Cisco VPN client for wm6 or some other 3rd party VPN client that is compatible with Cisco 3000 series?
I also is there an RSS feed reader that can display the news from BBC on today's screen.
Click to expand...
Click to collapse
The built-in L2TP/IPSec VPN client is compatible with the Cisco 3000 VPN Concentrator, but you need to setup the concentrator correctly to support it. It's a double bonus though as the setup for it to support the Windows Mobile L2TP/IPSec VPN Client is also applicable for the native Windows 2000+ L2TP/IPSec client, so you don't have to install the Cisco VPN Client on the PC's. The VPN Client in Windows Mobile is a bit temperamental though, especially on the Wizard, so there is a downside...... The 5.2.1437 ROM seems to be the most stable so far.
For RSS Feeds I am using JeyoInformer. This has an option to be displayed on the Today screen however I haven't used it too much, I just included it in my ROM build. There is a default XML file that it used and this has BBC's RSS news feed included.
HTH
Andy
Awesome! Thank you for the info. I will test is using the native VPN client. Will post the results.
So apparently the VPN that I need to connect to only uses L2TP/UDP where as the built in native VPN client uses PPTP or L2TP/IPSec. Any ideas if there is a VPN Client for Windows Mobile that uses L2TP/UDP?
shazaani said:
So apparently the VPN that I need to connect to only uses L2TP/UDP where as the built in native VPN client uses PPTP or L2TP/IPSec. Any ideas if there is a VPN Client for Windows Mobile that uses L2TP/UDP?
Click to expand...
Click to collapse
No, the setup on the VPN Concentrator is wrong, or at least not setup for L2TP/IPSec VPDN. If it is already setup and your network admin doesn't want to reconfigure it then you will have to get an alternative VPN client.
Some details here, however I used RSA Signatures instead of pre-shared keys but this requires certificates.
http://www.cisco.com/en/US/partner/...s_configuration_example09186a0080094aca.shtml
VPN 3000 configuration guides here: http://www.cisco.com/en/US/partner/...284/tsd_products_support_eol_series_home.html
HTH
Andy
How with the built-in VPN client does one specify the Cisco VPN 'group name'?
On linux I have a vpnc client functional, but to connect I need to be able to give the client the following:
vpn host
user
password
group name -- where do I put this in??
group password --I put this in as the IPSec/L2TP pre-shared key, of course in it's non-encrypted form via http://www.unix-ag.uni-kl.de/~massar/bin/cisco-decode -- is this correct?
old post, but I have the same question. My VPN requires a group name and group password (both of which I have) but the built wimo setup doesn't ask me for either.
hello
for group name and pass auth. you need to use anthavpn or bluefire sec. clients. but both not free
hi
I have a Nexus S. Great phone. Would be better if I could get around the Chinese Firewall. Just moved to China from US.
I have rooted the phone, I have connectbot and asproxy. I have a server in the US. I can open an ssh connection via connectbot and can forward ports, but I'm not sure what I should forward to - the IP address of my server and port I'm opening on the server? - localhost?.
I tried a few things:
Tried connectbot ssh tunneling to my server, and forward port 80 to localhost:8080, then type "localhost:8080" in my browser. No luck.
Tried with connectbot ssh tunneling to my server, to forward port 80 to server IP address port 22 (this is what I open the connection on via connectbot also). No luck.
Tried with connectbot ssh tunneling to my server, to forward port 80 to localhost:9999, then with ASproxy set up a proxy - which is also to my server.com using my login name, and proxy port 22 (which is what connectbot is connected to) - then tried to have ASproxy forward port 9999 to proxy (port 22). No luck.
I figure it has to be possible.
What I want: to forward all app info (gmail, gtalk, browser, gvoice, SIP, facebook) through the SSH tunnel.
Any thoughts very much appreciated. I feel like I have a faucet,and two hoses, and can't get the water to go through them.
Some interest in my post I guess but no replies.
If I hired a freelancer to program this would it be very complex?
How long would out take a competent developer to build?
Wt
Spotimote
Control Spotify on your PC with Spotimote !
(requires the installation of Spotimote server on your PC : http://www.evolu-on.com)
Features :
- Control Spotify : play/pause, next/previous track, volume, shuffle, repeat, track pos
- Access Spotify database and search for tracks or artists
- manages your favorites (tracks, albums...)
- import playlists in your favorites
- access your playlists (Spotify premium account required)
If you have any trouble using spotimote, please send a mail or leave a comment on the web site.
Spotimote communicates with the server component over Wifi. The connection is automatic, you don't have to specify an ip address or anything.
After the installation of the server component, when you launch it for the first time, you may be prompted by the Windows Firewall. You have to authorize the server component to access the network or it won't be able to communicate with your android device.
It works! Almost perfectly!! Nice job, well done!
Any plans to release a mac version?
+1 for mac.
crash on start
I have a crash on the start of the server, i check every task running, no one using libspotify.
Will there be a Mac server?
server
I am trying to get the server for my pc computer. The website is down and I cant get the server. Can someone give me a link to a mirrored site or upload it somewhere?
Thanks Devin
bump...Mac version coming soon?
Mac Server???
Yes, Mac Server please. I tried the third party one and it didn't work...
DavidIanWarren said:
Yes, Mac Server please. I tried the third party one and it didn't work...
Click to expand...
Click to collapse
It would be cool if this could be implemented: an alarm clock feature :silly:
Ok, the basic Idea of this App is to provide an easy setup for an ftp & or web server (should be customizable) which also provides a shortened url for easy access.
also my idea was that the app can do this over different of protocolls, bluetooth, w-lan usw.
is something like this technically possible?, i know there are ftpserver apps out there but it is not quite the same.
justanordinarydude said:
Ok, the basic Idea of this App is to provide an easy setup for an ftp & or web server (should be customizable) which also provides a shortened url for easy access.
also my idea was that the app can do this over different of protocolls, bluetooth, w-lan usw.
is something like this technically possible?, i know there are ftpserver apps out there but it is not quite the same.
Click to expand...
Click to collapse
Easy ftp and web server apps already exist that work over wifi. bluetooth is tricky, as a normal web or ftp server won't be easily usable (but bluetooth already has methods of doing file transfers that works quite well, and there are apps to handle this, like Blutooth File Manager). What is USW?
AFAIK, there is not an app to do those things over ad-hoc wifi - they all require connecting to an access point. Being able to open up an app and have it set up an ad-hoc wireless network with another android device and allow easy high-speed file sharing would be awesome.
As for cellular data, there's a major hurdle to overcome on some carriers. Verizon, for example, does not allow incoming connections over cellular data. So you can set up a web or ftp server, but you won't be able to access it. The way around that is to have the phone establish the connection to some server, then have that server act as the gateway. Bandwidth is not free, though, so I suspect you'd be hard-pressed to find an app that includes that feature, unless it also requires that you set up your own server gateway. I'd like to see something like this - an app that establishes general-purpose 2-way comms with a server application on command (by hitting a "start" button in the app), which then allows you to set up different types of servers (ssh, ftp, web, etc) that are routed through that gateway machine that you set up.
One way to accomplish that whole scheme is to use a VPN - when a VPN is established (even over 3G), you can access any server you want to via the VPN-assigned IP address.
What is this?
This Android App allows you to create a Secure or Insecure connection to your own private server. By simple launching the server and opening a port. You can then specify the configuration and connect. The server is a simple java server, which mirrors the Android App. (send PM for the server if you would like to test it.)
Main Features:
Change your DNS.
Share Internet (VPN [Root required] and Proxy).
TLS or None TLS connection.
View all connections.
Download Links (Playstore)
https://play.google.com/store/apps/details?id=com.badcompany.giminet.lite
Any Feedback is welcome.