Hi all
I have a fully unlocked (from purchase) P5100 tablet which has been rooted for openvpn support. I set up a bluetooth headest with it and everything was ok.
After a few days mobile originiated GSM voice is no longer working properly although mobile terminating seems to work fine .
GSM Speakerphone calls ring once on the tablet then go silent. and this is total "audio shut down" silent, no hiss no nothing, the call proceeds but when the call is picked up at the remote (B party) end , there is no voice path either way but DTMF tones can be inserted to line from the keypad.
GSM tablet originated calls made with a stereo headphone (i.e. expecting to listen to the call on headphone using the tablets internal microphone) give the same result as GSM speakerphone
GSM inbound calls to headphones work as expected
VOIP calls route as expected
tried turning off BT and WIFI , rebooting , unpairing the BT headset ...no restoration of audio !!
Well....i'm stumped !!! anyone got any clues ???
regards
CQU
for the record - I have checked the obvious like the "in call" volume was set to maximum not set to "0"
try Reset factory setting
Factory reset hasnt fixed it, going back to supplier as 'not fit for purpose" under the sale of goods act
Specifically wanted a 5100 for gsm voice calling
Regards
CQU
same problem...
Hi, I've got the same issue...
Even after flashing several custom roms I can make between 0 and 2 succesful outgoing gsm phone calls after a reboot.
Maybe anyone knows a radio rom that works properly in the netherlands? I'm hoping that that might solve the issue. Unfortunately, samsung hasn't released a new version for the netherlands yet as far as I know...
Related
I bought the Jabra BT-800 headset for 119 EUR and was hoping to enjoy the headset w/o getting my PPC out of my pocketst.
Well that didnt work out. Pairing was easy, and after switching on the headset (in profile on today screen) I could call with it. The only thing is, I cannot get the call list on the headset to work. It doesnt show any numbers at all, and i wonder how its supposed to work anyway.
That being said, I also don't get to see who's calling me when using the headset.
1) Incoming call.... PPC rings..
2) After a few seconds the headset backlight switches on showing "Jabra BT-800" (standard text). I do not get to see who's calling me on my headset.
3) When listening to the ring tone on headset, after a second or two I get a really annoying sqreaking sound and that stays on till I accept the call or hang up.
So it is not working for me. Besides the headset does not stay on my ear correctly. I have small ears and it is really uncomfortable.
I have Qtek 2020 with Windows Mobile 2003 SE ROM (downloaded from this forum), ROM version 2.06.00WWE, Radio 1.18.00, Protocol 1337.38, ExtROM 2.06.100a
The Jabra BT-800 does not do what they say it's supposed to do.
Anyone else got these problems or solutions? Ciao
R.
me too
Same problem... They say it is also capable of BT voice dialing. I hate the way it takes so long to answer calls.
I am going to find out if the sony ericson ones work.. Then get that. The reception on the BT800 is great though.
Re: me too
dewild1 said:
Same problem... They say it is also capable of BT voice dialing. I hate the way it takes so long to answer calls.
I am going to find out if the sony ericson ones work.. Then get that. The reception on the BT800 is great though.
Click to expand...
Click to collapse
Lucky you to get that far :evil:
After the upgrade to the Diamond 1.2 I have tried to bond my Bluespoon Digital. That was very easy and everything works fine, exept a call not is trasferred to the headset. I have tried both stacks, and I have tried it with the Sony Ericsson HBH 65. It simply doesn't work at all.
Does anybody have suggestions to what to do??
bluetooth headset not bonding
:lol:
Hi , I had smae problem with new I.Tech clip headset.
It's ok now as I downloaded the POcket Bluetotth Tools from this link:
http://bluetooth.i-networx.de/index_e.html
Now it's ok for incoming and outgoing calls...
Cheers..
Fingers
Persnickety Bluetooth
Thanks for the link!
I had a problem with my Jabra BT250 after the WM upgrade. The mic and speaker remained active on the device, and the earpeice on my headset was active, but not the headset mic. The BT Tools did the trick.
Thanks
Jabra BT800 & XDA ii
Hi there,
The Jabra BT800 isnt compatable with the XDA ii (check www.jabra.com)
I owned this headset and had exactly the same problems, i now own the Jabra BT200 and it works perfectly
The BT800 needs a phone with bluetooth handsfree profile to be able to use the advanced features like caller id. Xda II as standard has only bluetooth headset profile.
I'm not sure about the 2003SE rom some of you guys are using, but I've tried it with the Buzz WM2K5 rom (thanks buzz et al) and this DOES give it the bluetooth handsfree profile it needs.
BUT...
It seems Jabra's idea of caller id is to only pass the number across, and not the name. So for those of us that don't have a photographic memory its pretty useless. This isn't restricted to Xda's either. I tried a couple of Nokia phones that are 'compatible' according to www.jabra.com and these do exactly the same. Number shows on the jabra screen but no name, even though the phone is showing both.
I emailed Jabra about it and they acknowledge it is an issue. They also tell me there is an issue with numbers in international format in that they fail to pass the + sign across, so you can't ring out from the call list.
JD
Ya need 2.20 translated to have a working Hands Free profile.. BT800 needs hands free profile.
Caller ID still only displays if the number is a virgin to your system.. I think HBH662 will work with 2.20.
2005 may work with no problems too.
I have an interesting issue while using a Kitchen with Tachi Dialer (HTC Touch Pro)
I use a bluetooth headset almost everytime I make a call (I hate the handset as an actual phone)
It happens when I realize the wrong number has been dialed or the like (which also happens on occasion that it redials instead of dialing a selected number)
When I hit the end call button or the hard end button, the phone will think it has ended the call BUT the bluetooth headset is still in the call and the person can still pickup and talk. The headset cannot end the call and the soft and hard buttons also do not work.
The only way to end the call is to actually reset the phone or wait after the other end hangs up.
This seems to happen most if I end the call between dialing and when the headset establishes an active connection. (from the passive state)
I have 3 headsets:
Plantronics Voyager Pro
Voyager 815
Motorola H700
Any ideas?
Thanks,
Osiris
Hello,
since I've upgraded the ROM I am using now (Endymion) to the latest version (3.4) I have a strange problem.
I am opening a new thread because I am not pretty sure it is a ROM related issue (instead it could be a radio related problem, but this has never happened before, with the same radio I am using now). Kernel issue??
The problem is that if I activate the bluetooth and then connect my bluetooth headset, the call is like interrupted so I can't hear the voice of my interlocutor and vice versa for about 10-15 seconds. Then it goes as usual.
I've noticed this issue because I have a Tasker rule which activates the bluetooth if a certain person calls and if I am at home. But this happens even if I activate the bluetooth by hand.
Do you have an idea of what could the cause of this problem be?
I'm sorry, i can't really help you i just can tell you that i'm also on Endymion V3.4 and i often use a Bluetooth headset.
But everything works fine, i have no issues like you.
I often use Bluetooth headset too and the headset is working good for me, but it's the bluetooth activation that makes this problem happen.
Did you try to switch bluetooth ON during a call?
What radio do you use?
Yes i often switch on my Bluetooth headset during a call and I immediately hear the partner in my ear
I have never changed radio, because everything works fine for me (never change a running system).
The second reason is, that i can't flash radio, because I'm S-On. I used HTCDev in case of unlocking the bootloader.
I've actually not had a problem making or receving calls when using a Bluetooth head set.
However i have some time had problems listing to music on the headset when i'm out in public, however i think that might be the headset.
Would changing the radio change that?
Shamz84 said:
I've actually not had a problem making or receving calls when using a Bluetooth head set.
Click to expand...
Click to collapse
Again, such sentence tells me I wasn't clear enough.
I've never had a problem making or receiving calls when using a Bluetooth headset too!.
Indeed, the problem occurs when, and only when I activate the bluetooth during a call.
Hi there,
Fist of all, I apologize if my english is far from perfect.
I have a problem that do not seems to be very simple.
My HTC One S is running on the HTC Stock ROM, and I meet the issue decribed in the title.
The phone can connect to my handsets (tested with my mercedes system and a plantronics headset), I can start start/stop an incoming/outgoing call from the headset but during the communication there is absolutely no sound emitted to the speaker/ acquired from the mic.
Of course the volume is at max, the right output is selected in the call menu and secret mode is disabled and I already tried to unpair and repair the phone to the devices.
This problem has appeared suddently during a call in my car after 6 months of loyal service.
I've already suspected some app services to block the sound of the call (appslock, some games, ...) but my investigrations has not provided any result.
If I could avoid to wipe my phone for a so small issue that could be really great.
Does someone has an great idea to help me ?
Thank you very much for paying attention on my problem...
I am trying to set up my watch and have looked around everywhere and only getting a couple of dead end results. I am hoping someone has a solution or work around for what seems like a basic problem. I have the s3 frontier and it is connected via bluetooth to lgv20 and the lgv20 is connected via bluetooth to plantronics voyager legend headset. My goal is to quick dial a contact from the watch and it be routed over to the earpiece seamlessly. Right now when i try to swap the call the only options available are phone and dial pad, the third (bluetooth headset) is greyed out. If i swap to the phone obviously the call plays over phone and i need to manually make the change to plantronics from the status bar. Ofcourse all this changes after the call and reverts back and defeats the point anyway if im pulling out the phone in the first place. I have tried disabling the call profile from the s3 but that disables my ability to make the call in the first place, which is not an option. I tried third party apps to reroute the call and "soundaround" worked once, once. Any options or theories would be very much appreciated, this is like the core reason i got this thing and cant believe it would be such a hassle.
I also have the SAME PROBLEM and I also would appreciate any help...
In my case I have an OnePlus 3T + Gear S3 Frontier. I have used several BT headsets with same "bad" result.
Thanks in advance...
I have a Huawei P9 Plus + Gear S3 Frontier + Plantronics M55...... and SAME PROBLEM, i can enable "call profile" on S3 or Headset but not both.
When I connect S3 and headphones to a mobile samsung the "call profile" can be enabled on both, I tried it with samsung KZoom, and all works fine !!!
I wrote the assistance Samsung ... I hope he has a solution because the problem occurs with all bluetooth headsets, including the car's hands-free !!!